imx: mx6: use simpler runtime cpu dection macros

Use simpler runtime cpu dection macros.
i.MX6DL and i.MX6SOLO work the same, so use is_mx6sdl.

Signed-off-by: Peng Fan <van.freenix@gmail.com>
Cc: Stefano Babic <sbabic@denx.de>

diff --git a/arch/arm/cpu/armv7/mx6/clock.c b/arch/arm/cpu/armv7/mx6/clock.c
index a850d1a232489c6250a84d457eaf0b7c9f95c238..ff932aa7ed413332d40d7bf36a01d9b440f85c47 100644 (file)
--- a/arch/arm/cpu/armv7/mx6/clock.c
+++ b/arch/arm/cpu/armv7/mx6/clock.c
@@ -97,7 +97,7 @@ void enable_enet_clk(unsigned char enable)
 {
        u32 mask, *addr;
 
-       if (is_cpu_type(MXC_CPU_MX6UL)) {
+       if (is_mx6ul()) {
                mask = MXC_CCM_CCGR3_ENET_MASK;
                addr = &imx_ccm->CCGR3;
        } else {
@@ -117,7 +117,7 @@ void enable_uart_clk(unsigned char enable)
 {
        u32 mask;
 
-       if (is_cpu_type(MXC_CPU_MX6UL))
+       if (is_mx6ul())
                mask = MXC_CCM_CCGR5_UART_MASK;
        else
                mask = MXC_CCM_CCGR5_UART_MASK | MXC_CCM_CCGR5_UART_SERIAL_MASK;
@@ -168,7 +168,7 @@ int enable_i2c_clk(unsigned char enable, unsigned i2c_num)
                        reg &= ~mask;
                __raw_writel(reg, &imx_ccm->CCGR2);
        } else {
-               if (is_cpu_type(MXC_CPU_MX6SX) || is_cpu_type(MXC_CPU_MX6UL)) {
+               if (is_mx6sx() || is_mx6ul()) {
                        mask = MXC_CCM_CCGR6_I2C4_MASK;
                        addr = &imx_ccm->CCGR6;
                } else {
@@ -279,7 +279,7 @@ static u32 mxc_get_pll_pfd(enum pll_clocks pll, int pfd_num)
 
        switch (pll) {
        case PLL_BUS:
-               if (!is_cpu_type(MXC_CPU_MX6UL)) {
+               if (!is_mx6ul()) {
                        if (pfd_num == 3) {
                                /* No PFD3 on PPL2 */
                                return 0;
@@ -379,8 +379,8 @@ static u32 get_ipg_per_clk(void)
        u32 reg, perclk_podf;
 
        reg = __raw_readl(&imx_ccm->cscmr1);
-       if (is_cpu_type(MXC_CPU_MX6SL) || is_cpu_type(MXC_CPU_MX6SX) ||
-           is_mx6dqp() || is_cpu_type(MXC_CPU_MX6UL)) {
+       if (is_mx6sl() || is_mx6sx() ||
+           is_mx6dqp() || is_mx6ul()) {
                if (reg & MXC_CCM_CSCMR1_PER_CLK_SEL_MASK)
                        return MXC_HCLK; /* OSC 24Mhz */
        }
@@ -396,8 +396,7 @@ static u32 get_uart_clk(void)
        u32 freq = decode_pll(PLL_USBOTG, MXC_HCLK) / 6; /* static divider */
        reg = __raw_readl(&imx_ccm->cscdr1);
 
-       if (is_cpu_type(MXC_CPU_MX6SL) || is_cpu_type(MXC_CPU_MX6SX) ||
-           is_mx6dqp() || is_cpu_type(MXC_CPU_MX6UL)) {
+       if (is_mx6sl() || is_mx6sx() || is_mx6dqp() || is_mx6ul()) {
                if (reg & MXC_CCM_CSCDR1_UART_CLK_SEL)
                        freq = MXC_HCLK;
        }
@@ -416,8 +415,7 @@ static u32 get_cspi_clk(void)
        cspi_podf = (reg & MXC_CCM_CSCDR2_ECSPI_CLK_PODF_MASK) >>
                     MXC_CCM_CSCDR2_ECSPI_CLK_PODF_OFFSET;
 
-       if (is_mx6dqp() || is_cpu_type(MXC_CPU_MX6SL) ||
-           is_cpu_type(MXC_CPU_MX6SX) || is_cpu_type(MXC_CPU_MX6UL)) {
+       if (is_mx6dqp() || is_mx6sl() || is_mx6sx() || is_mx6ul()) {
                if (reg & MXC_CCM_CSCDR2_ECSPI_CLK_SEL_MASK)
                        return MXC_HCLK / (cspi_podf + 1);
        }
@@ -479,14 +477,13 @@ static u32 get_mmdc_ch0_clk(void)
 
        u32 freq, podf, per2_clk2_podf, pmu_misc2_audio_div;
 
-       if (is_cpu_type(MXC_CPU_MX6SX) || is_cpu_type(MXC_CPU_MX6UL) ||
-           is_cpu_type(MXC_CPU_MX6SL)) {
+       if (is_mx6sx() || is_mx6ul() || is_mx6sl()) {
                podf = (cbcdr & MXC_CCM_CBCDR_MMDC_CH1_PODF_MASK) >>
                        MXC_CCM_CBCDR_MMDC_CH1_PODF_OFFSET;
                if (cbcdr & MXC_CCM_CBCDR_PERIPH2_CLK_SEL) {
                        per2_clk2_podf = (cbcdr & MXC_CCM_CBCDR_PERIPH2_CLK2_PODF_MASK) >>
                                MXC_CCM_CBCDR_PERIPH2_CLK2_PODF_OFFSET;
-                       if (is_cpu_type(MXC_CPU_MX6SL)) {
+                       if (is_mx6sl()) {
                                if (cbcmr & MXC_CCM_CBCMR_PERIPH2_CLK2_SEL)
                                        freq = MXC_HCLK;
                                else
@@ -618,7 +615,7 @@ void mxs_set_lcdclk(u32 base_addr, u32 freq)
 
        debug("mxs_set_lcdclk, freq = %dKHz\n", freq);
 
-       if ((!is_cpu_type(MXC_CPU_MX6SX)) && !is_cpu_type(MXC_CPU_MX6UL)) {
+       if (!is_mx6sx() && !is_mx6ul()) {
                debug("This chip not support lcd!\n");
                return;
        }
@@ -630,7 +627,7 @@ void mxs_set_lcdclk(u32 base_addr, u32 freq)
                        return;
        }
 
-       if (is_cpu_type(MXC_CPU_MX6SX)) {
+       if (is_mx6sx()) {
                reg = readl(&imx_ccm->cscdr2);
                /* Can't change clocks when clock not from pre-mux */
                if ((reg & MXC_CCM_CSCDR2_LCDIF2_CLK_SEL_MASK) != 0)
@@ -711,7 +708,7 @@ void mxs_set_lcdclk(u32 base_addr, u32 freq)
                                MXC_CCM_CBCMR_LCDIF1_PODF_MASK,
                                ((postd - 1) <<
                                 MXC_CCM_CBCMR_LCDIF1_PODF_OFFSET));
-       } else if (is_cpu_type(MXC_CPU_MX6SX)) {
+       } else if (is_mx6sx()) {
                /* Setting LCDIF2 for i.MX6SX */
                if (enable_pll_video(pll_div, pll_num, pll_denom, post_div))
                        return;
@@ -737,7 +734,7 @@ int enable_lcdif_clock(u32 base_addr)
        u32 reg = 0;
        u32 lcdif_clk_sel_mask, lcdif_ccgr3_mask;
 
-       if (is_cpu_type(MXC_CPU_MX6SX)) {
+       if (is_mx6sx()) {
                if ((base_addr != LCDIF1_BASE_ADDR) &&
                    (base_addr != LCDIF2_BASE_ADDR)) {
                        puts("Wrong LCD interface!\n");
@@ -752,7 +749,7 @@ int enable_lcdif_clock(u32 base_addr)
                         MXC_CCM_CCGR3_DISP_AXI_MASK) :
                        (MXC_CCM_CCGR3_LCDIF1_PIX_MASK |
                         MXC_CCM_CCGR3_DISP_AXI_MASK);
-       } else if (is_cpu_type(MXC_CPU_MX6UL)) {
+       } else if (is_mx6ul()) {
                if (base_addr != LCDIF1_BASE_ADDR) {
                        puts("Wrong LCD interface!\n");
                        return -EINVAL;
@@ -850,8 +847,7 @@ int enable_fec_anatop_clock(int fec_id, enum enet_freq freq)
                reg |= BF_ANADIG_PLL_ENET_DIV_SELECT(freq);
        } else if (fec_id == 1) {
                /* Only i.MX6SX/UL support ENET2 */
-               if (!(is_cpu_type(MXC_CPU_MX6SX) ||
-                     is_cpu_type(MXC_CPU_MX6UL)))
+               if (!(is_mx6sx() || is_mx6ul()))
                        return -EINVAL;
                reg &= ~BM_ANADIG_PLL_ENET2_DIV_SELECT;
                reg |= BF_ANADIG_PLL_ENET2_DIV_SELECT(freq);
@@ -1044,7 +1040,7 @@ int enable_pcie_clock(void)
 #define ANADIG_ANA_MISC1_LVDS1_CLK_SEL_PCIE_REF        0xa
 #define ANADIG_ANA_MISC1_LVDS1_CLK_SEL_SATA_REF        0xb
 
-       if (is_cpu_type(MXC_CPU_MX6SX))
+       if (is_mx6sx())
                lvds1_clk_sel = ANADIG_ANA_MISC1_LVDS1_CLK_SEL_PCIE_REF;
        else
                lvds1_clk_sel = ANADIG_ANA_MISC1_LVDS1_CLK_SEL_SATA_REF;
@@ -1228,7 +1224,7 @@ static void disable_ldb_di_clock_sources(void)
        /* Make sure PFDs are disabled at boot. */
        reg = readl(&mxc_ccm->analog_pfd_528);
        /* Cannot disable pll2_pfd2_396M, as it is the MMDC clock in iMX6DL */
-       if (is_cpu_type(MXC_CPU_MX6DL) || is_cpu_type(MXC_CPU_MX6SOLO))
+       if (is_mx6sdl())
                reg |= 0x80008080;
        else
                reg |= 0x80808080;
@@ -1251,7 +1247,7 @@ static void enable_ldb_di_clock_sources(void)
        int reg;
 
        reg = readl(&mxc_ccm->analog_pfd_528);
-       if (is_cpu_type(MXC_CPU_MX6DL) || is_cpu_type(MXC_CPU_MX6SOLO))
+       if (is_mx6sdl())
                reg &= ~(0x80008080);
        else
                reg &= ~(0x80808080);

diff --git a/arch/arm/cpu/armv7/mx6/ddr.c b/arch/arm/cpu/armv7/mx6/ddr.c
index 1e7ae289337fd665177cda4a6ddcf8b2c893798d..3cc866616a0b46d4c9f64a63f064ed53d3061366 100644 (file)
--- a/arch/arm/cpu/armv7/mx6/ddr.c
+++ b/arch/arm/cpu/armv7/mx6/ddr.c
@@ -888,8 +888,7 @@ void mx6sdl_dram_iocfg(unsigned width,
 #define MR(val, ba, cmd, cs1) \
        ((val << 16) | (1 << 15) | (cmd << 4) | (cs1 << 3) | ba)
 #define MMDC1(entry, value) do {                                         \
-       if (!is_cpu_type(MXC_CPU_MX6SX) && !is_cpu_type(MXC_CPU_MX6UL) && \
-           !is_cpu_type(MXC_CPU_MX6SL))                                  \
+       if (!is_mx6sx() && !is_mx6ul() && !is_mx6sl())                    \
                mmdc1->entry = value;                                     \
        } while (0)
 
@@ -1197,12 +1196,11 @@ void mx6_ddr3_cfg(const struct mx6_ddr_sysinfo *sysinfo,
        u16 mem_speed = ddr3_cfg->mem_speed;
 
        mmdc0 = (struct mmdc_p_regs *)MMDC_P0_BASE_ADDR;
-       if (!is_cpu_type(MXC_CPU_MX6SX) && !is_cpu_type(MXC_CPU_MX6UL) &&
-           !is_cpu_type(MXC_CPU_MX6SL))
+       if (!is_mx6sx() && !is_mx6ul() && !is_mx6sl())
                mmdc1 = (struct mmdc_p_regs *)MMDC_P1_BASE_ADDR;
 
        /* Limit mem_speed for MX6D/MX6Q */
-       if (is_cpu_type(MXC_CPU_MX6Q) || is_cpu_type(MXC_CPU_MX6D)) {
+       if (is_mx6dq()) {
                if (mem_speed > 1066)
                        mem_speed = 1066; /* 1066 MT/s */
 
@@ -1221,7 +1219,7 @@ void mx6_ddr3_cfg(const struct mx6_ddr_sysinfo *sysinfo,
         * Data rate of 1066 MT/s requires 533 MHz DDR3 clock, but MX6D/Q supports
         * up to 528 MHz, so reduce the clock to fit chip specs
         */
-       if (is_cpu_type(MXC_CPU_MX6Q) || is_cpu_type(MXC_CPU_MX6D)) {
+       if (is_mx6dq()) {
                if (clock > 528)
                        clock = 528; /* 528 MHz */
        }

diff --git a/arch/arm/cpu/armv7/mx6/soc.c b/arch/arm/cpu/armv7/mx6/soc.c
index aaa1adb446c1ea2fa289308062d0f5aa7700e5f7..407f3160fd6193b14b793e489e796fad9b59135c 100644 (file)
--- a/arch/arm/cpu/armv7/mx6/soc.c
+++ b/arch/arm/cpu/armv7/mx6/soc.c
@@ -126,7 +126,7 @@ u32 get_cpu_speed_grade_hz(void)
        val >>= OCOTP_CFG3_SPEED_SHIFT;
        val &= 0x3;
 
-       if (is_cpu_type(MXC_CPU_MX6UL)) {
+       if (is_mx6ul()) {
                if (val == OCOTP_CFG3_SPEED_528MHZ)
                        return 528000000;
                else if (val == OCOTP_CFG3_SPEED_696MHZ)
@@ -138,14 +138,14 @@ u32 get_cpu_speed_grade_hz(void)
        switch (val) {
        /* Valid for IMX6DQ */
        case OCOTP_CFG3_SPEED_1P2GHZ:
-               if (is_cpu_type(MXC_CPU_MX6Q) || is_cpu_type(MXC_CPU_MX6D))
+               if (is_mx6dq())
                        return 1200000000;
        /* Valid for IMX6SX/IMX6SDL/IMX6DQ */
        case OCOTP_CFG3_SPEED_1GHZ:
                return 996000000;
        /* Valid for IMX6DQ */
        case OCOTP_CFG3_SPEED_850MHZ:
-               if (is_cpu_type(MXC_CPU_MX6Q) || is_cpu_type(MXC_CPU_MX6D))
+               if (is_mx6dq())
                        return 852000000;
        /* Valid for IMX6SX/IMX6SDL/IMX6DQ */
        case OCOTP_CFG3_SPEED_800MHZ:
@@ -293,7 +293,7 @@ static void clear_mmdc_ch_mask(void)
        reg = readl(&mxc_ccm->ccdr);
 
        /* Clear MMDC channel mask */
-       if (is_cpu_type(MXC_CPU_MX6SX) || is_cpu_type(MXC_CPU_MX6UL) || is_cpu_type(MXC_CPU_MX6SL))
+       if (is_mx6sx() || is_mx6ul() || is_mx6sl())
                reg &= ~(MXC_CCM_CCDR_MMDC_CH1_HS_MASK);
        else
                reg &= ~(MXC_CCM_CCDR_MMDC_CH1_HS_MASK | MXC_CCM_CCDR_MMDC_CH0_HS_MASK);
@@ -459,8 +459,7 @@ void imx_get_mac_from_fuse(int dev_id, unsigned char *mac)
        struct fuse_bank4_regs *fuse =
                        (struct fuse_bank4_regs *)bank->fuse_regs;
 
-       if ((is_cpu_type(MXC_CPU_MX6SX) || is_cpu_type(MXC_CPU_MX6UL)) && 
-               dev_id == 1) {
+       if ((is_mx6sx() || is_mx6ul()) && dev_id == 1) {
                u32 value = readl(&fuse->mac_addr2);
                mac[0] = value >> 24 ;
                mac[1] = value >> 16 ;
@@ -524,7 +523,7 @@ void s_init(void)
        u32 mask528;
        u32 reg, periph1, periph2;
 
-       if (is_cpu_type(MXC_CPU_MX6SX) || is_cpu_type(MXC_CPU_MX6UL))
+       if (is_mx6sx() || is_mx6ul())
                return;
 
        /* Due to hardware limitation, on MX6Q we need to gate/ungate all PFDs