engicam: Move uart mux init to SPL

Since, u-boot handle fdt through uart so move the UART code
to SPL instead make it to global area.

Cc: Stefano Babic <sbabic@denx.de>
Cc: Matteo Lisi <matteo.lisi@engicam.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>

diff --git a/board/engicam/geam6ul/geam6ul.c b/board/engicam/geam6ul/geam6ul.c
index eb0e533dfeea8f50a11872c11b480618192e5417..c3d92ace76e04aadd647c2e2be3941f4b42c64da 100644 (file)
--- a/board/engicam/geam6ul/geam6ul.c
+++ b/board/engicam/geam6ul/geam6ul.c
@@ -22,22 +22,6 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-#define UART_PAD_CTRL  (PAD_CTL_PKE | PAD_CTL_PUE |            \
-       PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED |               \
-       PAD_CTL_DSE_40ohm   | PAD_CTL_SRE_FAST  | PAD_CTL_HYS)
-
-static iomux_v3_cfg_t const uart1_pads[] = {
-       MX6_PAD_UART1_TX_DATA__UART1_DCE_TX | MUX_PAD_CTRL(UART_PAD_CTRL),
-       MX6_PAD_UART1_RX_DATA__UART1_DCE_RX | MUX_PAD_CTRL(UART_PAD_CTRL),
-};
-
-int board_early_init_f(void)
-{
-       imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads));
-
-       return 0;
-}
-
 #ifdef CONFIG_NAND_MXS
 
 #define GPMI_PAD_CTRL0         (PAD_CTL_PKE | PAD_CTL_PUE | PAD_CTL_PUS_100K_UP)
@@ -173,6 +157,15 @@ int dram_init(void)
 #include <asm/arch/crm_regs.h>
 #include <asm/arch/mx6-ddr.h>
 
+#define UART_PAD_CTRL  (PAD_CTL_PKE | PAD_CTL_PUE |            \
+       PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED |               \
+       PAD_CTL_DSE_40ohm   | PAD_CTL_SRE_FAST  | PAD_CTL_HYS)
+
+static iomux_v3_cfg_t const uart1_pads[] = {
+       MX6_PAD_UART1_TX_DATA__UART1_DCE_TX | MUX_PAD_CTRL(UART_PAD_CTRL),
+       MX6_PAD_UART1_RX_DATA__UART1_DCE_RX | MUX_PAD_CTRL(UART_PAD_CTRL),
+};
+
 /* MMC board initialization is needed till adding DM support in SPL */
 #if defined(CONFIG_FSL_ESDHC) && !defined(CONFIG_DM_MMC)
 #include <mmc.h>
@@ -341,7 +334,7 @@ void board_init_f(ulong dummy)
        ccgr_init();
 
        /* iomux and setup of i2c */
-       board_early_init_f();
+       imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads));
 
        /* setup GP timer */
        timer_init();

diff --git a/board/engicam/icorem6/icorem6.c b/board/engicam/icorem6/icorem6.c
index c8aaad1bfc3dc70d9980b2435b2b77bc7c496a0f..8c62f0ec344fe69be1399a20b1c65f43191d2b62 100644 (file)
--- a/board/engicam/icorem6/icorem6.c
+++ b/board/engicam/icorem6/icorem6.c
@@ -23,15 +23,6 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-#define UART_PAD_CTRL  (PAD_CTL_PKE | PAD_CTL_PUE |            \
-       PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED |               \
-       PAD_CTL_DSE_40ohm   | PAD_CTL_SRE_FAST  | PAD_CTL_HYS)
-
-static iomux_v3_cfg_t const uart4_pads[] = {
-       IOMUX_PADS(PAD_KEY_COL0__UART4_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)),
-       IOMUX_PADS(PAD_KEY_ROW0__UART4_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)),
-};
-
 #ifdef CONFIG_NAND_MXS
 
 #define GPMI_PAD_CTRL0 (PAD_CTL_PKE | PAD_CTL_PUE | PAD_CTL_PUS_100K_UP)
@@ -199,13 +190,6 @@ static void setup_display(void)
 }
 #endif /* CONFIG_VIDEO_IPUV3 */
 
-int board_early_init_f(void)
-{
-       SETUP_IOMUX_PADS(uart4_pads);
-
-       return 0;
-}
-
 #ifdef CONFIG_ENV_IS_IN_MMC
 static void mmc_late_init(void)
 {
@@ -281,6 +265,15 @@ int dram_init(void)
 #include <asm/arch/crm_regs.h>
 #include <asm/arch/mx6-ddr.h>
 
+#define UART_PAD_CTRL  (PAD_CTL_PKE | PAD_CTL_PUE |            \
+       PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED |               \
+       PAD_CTL_DSE_40ohm   | PAD_CTL_SRE_FAST  | PAD_CTL_HYS)
+
+static iomux_v3_cfg_t const uart4_pads[] = {
+       IOMUX_PADS(PAD_KEY_COL0__UART4_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)),
+       IOMUX_PADS(PAD_KEY_ROW0__UART4_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)),
+};
+
 /* MMC board initialization is needed till adding DM support in SPL */
 #if defined(CONFIG_FSL_ESDHC) && !defined(CONFIG_DM_MMC)
 #include <mmc.h>
@@ -617,7 +610,7 @@ void board_init_f(ulong dummy)
        gpr_init();
 
        /* iomux */
-       board_early_init_f();
+       SETUP_IOMUX_PADS(uart4_pads);
 
        /* setup GP timer */
        timer_init();

diff --git a/board/engicam/icorem6_rqs/icorem6_rqs.c b/board/engicam/icorem6_rqs/icorem6_rqs.c
index 2027b283ace85fdc85744e45db437d0a45192a7a..d6ca62d0aa2aa802253492ccb6c3bb3ebdd75862 100644 (file)
--- a/board/engicam/icorem6_rqs/icorem6_rqs.c
+++ b/board/engicam/icorem6_rqs/icorem6_rqs.c
@@ -22,22 +22,6 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-#define UART_PAD_CTRL  (PAD_CTL_PKE | PAD_CTL_PUE |            \
-       PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED |               \
-       PAD_CTL_DSE_40ohm   | PAD_CTL_SRE_FAST  | PAD_CTL_HYS)
-
-static iomux_v3_cfg_t const uart4_pads[] = {
-       IOMUX_PADS(PAD_KEY_COL0__UART4_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)),
-       IOMUX_PADS(PAD_KEY_ROW0__UART4_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)),
-};
-
-int board_early_init_f(void)
-{
-       SETUP_IOMUX_PADS(uart4_pads);
-
-       return 0;
-}
-
 int board_init(void)
 {
        /* Address of boot parameters */
@@ -110,6 +94,15 @@ int dram_init(void)
 #include <asm/arch/crm_regs.h>
 #include <asm/arch/mx6-ddr.h>
 
+#define UART_PAD_CTRL  (PAD_CTL_PKE | PAD_CTL_PUE |            \
+       PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED |               \
+       PAD_CTL_DSE_40ohm   | PAD_CTL_SRE_FAST  | PAD_CTL_HYS)
+
+static iomux_v3_cfg_t const uart4_pads[] = {
+       IOMUX_PADS(PAD_KEY_COL0__UART4_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)),
+       IOMUX_PADS(PAD_KEY_ROW0__UART4_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)),
+};
+
 /* MMC board initialization is needed till adding DM support in SPL */
 #if defined(CONFIG_FSL_ESDHC) && !defined(CONFIG_DM_MMC)
 #include <mmc.h>
@@ -488,7 +481,7 @@ void board_init_f(ulong dummy)
        gpr_init();
 
        /* iomux */
-       board_early_init_f();
+       SETUP_IOMUX_PADS(uart4_pads);
 
        /* setup GP timer */
        timer_init();

diff --git a/board/engicam/isiotmx6ul/isiotmx6ul.c b/board/engicam/isiotmx6ul/isiotmx6ul.c
index 5d1c693e22926459f9ff87a939e56dc07022f8b9..008a7ae25f54d32dccefedab40091c77cdb948f1 100644 (file)
--- a/board/engicam/isiotmx6ul/isiotmx6ul.c
+++ b/board/engicam/isiotmx6ul/isiotmx6ul.c
@@ -22,22 +22,6 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-#define UART_PAD_CTRL  (PAD_CTL_PKE | PAD_CTL_PUE | \
-                       PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \
-                       PAD_CTL_DSE_40ohm   | PAD_CTL_SRE_FAST  | PAD_CTL_HYS)
-
-static iomux_v3_cfg_t const uart1_pads[] = {
-       MX6_PAD_UART1_TX_DATA__UART1_DCE_TX | MUX_PAD_CTRL(UART_PAD_CTRL),
-       MX6_PAD_UART1_RX_DATA__UART1_DCE_RX | MUX_PAD_CTRL(UART_PAD_CTRL),
-};
-
-int board_early_init_f(void)
-{
-       imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads));
-
-       return 0;
-}
-
 #ifdef CONFIG_NAND_MXS
 
 #define GPMI_PAD_CTRL0         (PAD_CTL_PKE | PAD_CTL_PUE | PAD_CTL_PUS_100K_UP)
@@ -185,6 +169,15 @@ int dram_init(void)
 #include <asm/arch/crm_regs.h>
 #include <asm/arch/mx6-ddr.h>
 
+#define UART_PAD_CTRL  (PAD_CTL_PKE | PAD_CTL_PUE | \
+                       PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \
+                       PAD_CTL_DSE_40ohm   | PAD_CTL_SRE_FAST  | PAD_CTL_HYS)
+
+static iomux_v3_cfg_t const uart1_pads[] = {
+       MX6_PAD_UART1_TX_DATA__UART1_DCE_TX | MUX_PAD_CTRL(UART_PAD_CTRL),
+       MX6_PAD_UART1_RX_DATA__UART1_DCE_RX | MUX_PAD_CTRL(UART_PAD_CTRL),
+};
+
 /* MMC board initialization is needed till adding DM support in SPL */
 #if defined(CONFIG_FSL_ESDHC) && !defined(CONFIG_DM_MMC)
 #include <mmc.h>
@@ -402,7 +395,7 @@ void board_init_f(ulong dummy)
        ccgr_init();
 
        /* iomux and setup of i2c */
-       board_early_init_f();
+       imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads));
 
        /* setup GP timer */
        timer_init();