*/
#include <common.h>
+#include <dm.h>
#include <malloc.h>
#include <spi.h>
#include <os.h>
#include <asm/getopt.h>
#include <asm/spi.h>
#include <asm/state.h>
+#include <dm/device-internal.h>
+#include <dm/lists.h>
+#include <dm/uclass-internal.h>
+
+DECLARE_GLOBAL_DATA_PTR;
/*
* The different states that our SPI flash transitions between.
SF_ERASE, /* erase the flash */
SF_READ_STATUS, /* read the flash's status register */
SF_READ_STATUS1, /* read the flash's status register upper 8 bits*/
+ SF_WRITE_STATUS, /* write the flash's status register */
};
static const char *sandbox_sf_state_name(enum sandbox_sf_state state)
{
static const char * const states[] = {
"CMD", "ID", "ADDR", "READ", "WRITE", "ERASE", "READ_STATUS",
+ "READ_STATUS1", "WRITE_STATUS",
};
return states[state];
}
/* Internal state data for each SPI flash */
struct sandbox_spi_flash {
+ unsigned int cs; /* Chip select we are attached to */
/*
* As we receive data over the SPI bus, our flash transitions
* between states. For example, we start off in the SF_CMD
int fd;
};
-static int sandbox_sf_setup(void **priv, const char *spec)
+struct sandbox_spi_flash_plat_data {
+ const char *filename;
+ const char *device_name;
+ int bus;
+ int cs;
+};
+
+/**
+ * This is a very strange probe function. If it has platform data (which may
+ * have come from the device tree) then this function gets the filename and
+ * device type from there. Failing that it looks at the command line
+ * parameter.
+ */
+static int sandbox_sf_probe(struct udevice *dev)
{
/* spec = idcode:file */
- struct sandbox_spi_flash *sbsf;
+ struct sandbox_spi_flash *sbsf = dev_get_priv(dev);
const char *file;
size_t len, idname_len;
const struct spi_flash_params *data;
-
- file = strchr(spec, ':');
- if (!file) {
- printf("sandbox_sf: unable to parse file\n");
- goto error;
+ struct sandbox_spi_flash_plat_data *pdata = dev_get_platdata(dev);
+ struct sandbox_state *state = state_get_current();
+ struct udevice *bus = dev->parent;
+ const char *spec = NULL;
+ int ret = 0;
+ int cs = -1;
+ int i;
+
+ debug("%s: bus %d, looking for emul=%p: ", __func__, bus->seq, dev);
+ if (bus->seq >= 0 && bus->seq < CONFIG_SANDBOX_SPI_MAX_BUS) {
+ for (i = 0; i < CONFIG_SANDBOX_SPI_MAX_CS; i++) {
+ if (state->spi[bus->seq][i].emul == dev)
+ cs = i;
+ }
+ }
+ if (cs == -1) {
+ printf("Error: Unknown chip select for device '%s'",
+ dev->name);
+ return -EINVAL;
+ }
+ debug("found at cs %d\n", cs);
+
+ if (!pdata->filename) {
+ struct sandbox_state *state = state_get_current();
+
+ assert(bus->seq != -1);
+ if (bus->seq < CONFIG_SANDBOX_SPI_MAX_BUS)
+ spec = state->spi[bus->seq][cs].spec;
+ if (!spec)
+ return -ENOENT;
+
+ file = strchr(spec, ':');
+ if (!file) {
+ printf("sandbox_sf: unable to parse file\n");
+ ret = -EINVAL;
+ goto error;
+ }
+ idname_len = file - spec;
+ pdata->filename = file + 1;
+ pdata->device_name = spec;
+ ++file;
+ } else {
+ spec = strchr(pdata->device_name, ',');
+ if (spec)
+ spec++;
+ else
+ spec = pdata->device_name;
+ idname_len = strlen(spec);
}
- idname_len = file - spec;
- ++file;
+ debug("%s: device='%s'\n", __func__, spec);
for (data = spi_flash_params_table; data->name; data++) {
len = strlen(data->name);
if (idname_len != len)
continue;
- if (!memcmp(spec, data->name, len))
+ if (!strncasecmp(spec, data->name, len))
break;
}
if (!data->name) {
printf("sandbox_sf: unknown flash '%*s'\n", (int)idname_len,
spec);
+ ret = -EINVAL;
goto error;
}
if (sandbox_sf_0xff[0] == 0x00)
memset(sandbox_sf_0xff, 0xff, sizeof(sandbox_sf_0xff));
- sbsf = calloc(sizeof(*sbsf), 1);
- if (!sbsf) {
- printf("sandbox_sf: out of memory\n");
- goto error;
- }
-
- sbsf->fd = os_open(file, 02);
+ sbsf->fd = os_open(pdata->filename, 02);
if (sbsf->fd == -1) {
free(sbsf);
- printf("sandbox_sf: unable to open file '%s'\n", file);
+ printf("sandbox_sf: unable to open file '%s'\n",
+ pdata->filename);
+ ret = -EIO;
goto error;
}
sbsf->data = data;
+ sbsf->cs = cs;
- *priv = sbsf;
return 0;
error:
- return 1;
+ return ret;
}
-static void sandbox_sf_free(void *priv)
+static int sandbox_sf_remove(struct udevice *dev)
{
- struct sandbox_spi_flash *sbsf = priv;
+ struct sandbox_spi_flash *sbsf = dev_get_priv(dev);
os_close(sbsf->fd);
- free(sbsf);
+
+ return 0;
}
-static void sandbox_sf_cs_activate(void *priv)
+static void sandbox_sf_cs_activate(struct udevice *dev)
{
- struct sandbox_spi_flash *sbsf = priv;
+ struct sandbox_spi_flash *sbsf = dev_get_priv(dev);
debug("sandbox_sf: CS activated; state is fresh!\n");
sbsf->cmd = SF_CMD;
}
-static void sandbox_sf_cs_deactivate(void *priv)
+static void sandbox_sf_cs_deactivate(struct udevice *dev)
{
debug("sandbox_sf: CS deactivated; cmd done processing!\n");
}
+/*
+ * There are times when the data lines are allowed to tristate. What
+ * is actually sensed on the line depends on the hardware. It could
+ * always be 0xFF/0x00 (if there are pull ups/downs), or things could
+ * float and so we'd get garbage back. This func encapsulates that
+ * scenario so we can worry about the details here.
+ */
+static void sandbox_spi_tristate(u8 *buf, uint len)
+{
+ /* XXX: make this into a user config option ? */
+ memset(buf, 0xff, len);
+}
+
/* Figure out what command this stream is telling us to do */
static int sandbox_sf_process_cmd(struct sandbox_spi_flash *sbsf, const u8 *rx,
u8 *tx)
enum sandbox_sf_state oldstate = sbsf->state;
/* We need to output a byte for the cmd byte we just ate */
- sandbox_spi_tristate(tx, 1);
+ if (tx)
+ sandbox_spi_tristate(tx, 1);
sbsf->cmd = rx[0];
switch (sbsf->cmd) {
debug(" write enabled\n");
sbsf->status |= STAT_WEL;
break;
+ case CMD_WRITE_STATUS:
+ sbsf->state = SF_WRITE_STATUS;
+ break;
default: {
int flags = sbsf->data->flags;
sbsf->erase_size = 64 << 10;
} else {
debug(" cmd unknown: %#x\n", sbsf->cmd);
- return 1;
+ return -EIO;
}
sbsf->state = SF_ADDR;
break;
return 0;
}
-static int sandbox_sf_xfer(void *priv, const u8 *rx, u8 *tx,
- uint bytes)
+static int sandbox_sf_xfer(struct udevice *dev, unsigned int bitlen,
+ const void *rxp, void *txp, unsigned long flags)
{
- struct sandbox_spi_flash *sbsf = priv;
+ struct sandbox_spi_flash *sbsf = dev_get_priv(dev);
+ const uint8_t *rx = rxp;
+ uint8_t *tx = txp;
uint cnt, pos = 0;
+ int bytes = bitlen / 8;
int ret;
debug("sandbox_sf: state:%x(%s) bytes:%u\n", sbsf->state,
sandbox_sf_state_name(sbsf->state), bytes);
+ if ((flags & SPI_XFER_BEGIN))
+ sandbox_sf_cs_activate(dev);
+
if (sbsf->state == SF_CMD) {
/* Figure out the initial state */
- if (sandbox_sf_process_cmd(sbsf, rx, tx))
- return 1;
+ ret = sandbox_sf_process_cmd(sbsf, rx, tx);
+ if (ret)
+ return ret;
++pos;
}
sbsf->off = (sbsf->off << 8) | rx[pos];
debug("addr:%06x\n", sbsf->off);
- sandbox_spi_tristate(&tx[pos++], 1);
+ if (tx)
+ sandbox_spi_tristate(&tx[pos], 1);
+ pos++;
/* See if we're done processing */
if (sbsf->addr_bytes <
/* Next state! */
if (os_lseek(sbsf->fd, sbsf->off, OS_SEEK_SET) < 0) {
puts("sandbox_sf: os_lseek() failed");
- return 1;
+ return -EIO;
}
switch (sbsf->cmd) {
case CMD_READ_ARRAY_FAST:
cnt = bytes - pos;
debug(" tx: read(%u)\n", cnt);
+ assert(tx);
ret = os_read(sbsf->fd, tx + pos, cnt);
if (ret < 0) {
- puts("sandbox_spi: os_read() failed\n");
- return 1;
+ puts("sandbox_sf: os_read() failed\n");
+ return -EIO;
}
pos += ret;
break;
memset(tx + pos, sbsf->status >> 8, cnt);
pos += cnt;
break;
+ case SF_WRITE_STATUS:
+ debug(" write status: %#x (ignored)\n", rx[pos]);
+ pos = bytes;
+ break;
case SF_WRITE:
/*
* XXX: need to handle exotic behavior:
cnt = bytes - pos;
debug(" rx: write(%u)\n", cnt);
- sandbox_spi_tristate(&tx[pos], cnt);
+ if (tx)
+ sandbox_spi_tristate(&tx[pos], cnt);
ret = os_write(sbsf->fd, rx + pos, cnt);
if (ret < 0) {
puts("sandbox_spi: os_write() failed\n");
- return 1;
+ return -EIO;
}
pos += ret;
sbsf->status &= ~STAT_WEL;
sbsf->erase_size);
cnt = bytes - pos;
- sandbox_spi_tristate(&tx[pos], cnt);
+ if (tx)
+ sandbox_spi_tristate(&tx[pos], cnt);
pos += cnt;
/*
}
done:
- return pos == bytes ? 0 : 1;
+ if (flags & SPI_XFER_END)
+ sandbox_sf_cs_deactivate(dev);
+ return pos == bytes ? 0 : -EIO;
+}
+
+int sandbox_sf_ofdata_to_platdata(struct udevice *dev)
+{
+ struct sandbox_spi_flash_plat_data *pdata = dev_get_platdata(dev);
+ const void *blob = gd->fdt_blob;
+ int node = dev->of_offset;
+
+ pdata->filename = fdt_getprop(blob, node, "sandbox,filename", NULL);
+ pdata->device_name = fdt_getprop(blob, node, "compatible", NULL);
+ if (!pdata->filename || !pdata->device_name) {
+ debug("%s: Missing properties, filename=%s, device_name=%s\n",
+ __func__, pdata->filename, pdata->device_name);
+ return -EINVAL;
+ }
+
+ return 0;
}
-static const struct sandbox_spi_emu_ops sandbox_sf_ops = {
- .setup = sandbox_sf_setup,
- .free = sandbox_sf_free,
- .cs_activate = sandbox_sf_cs_activate,
- .cs_deactivate = sandbox_sf_cs_deactivate,
+static const struct dm_spi_emul_ops sandbox_sf_emul_ops = {
.xfer = sandbox_sf_xfer,
};
+#ifdef CONFIG_SPI_FLASH
static int sandbox_cmdline_cb_spi_sf(struct sandbox_state *state,
const char *arg)
{
* spec here, but the problem is that no U-Boot init has been done
* yet. Perhaps we can figure something out.
*/
- state->spi[bus][cs].ops = &sandbox_sf_ops;
state->spi[bus][cs].spec = spec;
return 0;
}
SANDBOX_CMDLINE_OPT(spi_sf, 1, "connect a SPI flash: <bus>:<cs>:<id>:<file>");
+
+int sandbox_sf_bind_emul(struct sandbox_state *state, int busnum, int cs,
+ struct udevice *bus, int of_offset, const char *spec)
+{
+ struct udevice *emul;
+ char name[20], *str;
+ struct driver *drv;
+ int ret;
+
+ /* now the emulator */
+ strncpy(name, spec, sizeof(name) - 6);
+ name[sizeof(name) - 6] = '\0';
+ strcat(name, "-emul");
+ str = strdup(name);
+ if (!str)
+ return -ENOMEM;
+ drv = lists_driver_lookup_name("sandbox_sf_emul");
+ if (!drv) {
+ puts("Cannot find sandbox_sf_emul driver\n");
+ return -ENOENT;
+ }
+ ret = device_bind(bus, drv, str, NULL, of_offset, &emul);
+ if (ret) {
+ printf("Cannot create emul device for spec '%s' (err=%d)\n",
+ spec, ret);
+ return ret;
+ }
+ state->spi[busnum][cs].emul = emul;
+
+ return 0;
+}
+
+void sandbox_sf_unbind_emul(struct sandbox_state *state, int busnum, int cs)
+{
+ state->spi[busnum][cs].emul = NULL;
+}
+
+static int sandbox_sf_bind_bus_cs(struct sandbox_state *state, int busnum,
+ int cs, const char *spec)
+{
+ struct udevice *bus, *slave;
+ int ret;
+
+ ret = uclass_find_device_by_seq(UCLASS_SPI, busnum, true, &bus);
+ if (ret) {
+ printf("Invalid bus %d for spec '%s' (err=%d)\n", busnum,
+ spec, ret);
+ return ret;
+ }
+ ret = device_find_child_by_seq(bus, cs, true, &slave);
+ if (!ret) {
+ printf("Chip select %d already exists for spec '%s'\n", cs,
+ spec);
+ return -EEXIST;
+ }
+
+ ret = spi_bind_device(bus, cs, "spi_flash_std", spec, &slave);
+ if (ret)
+ return ret;
+
+ return sandbox_sf_bind_emul(state, busnum, cs, bus, -1, spec);
+}
+
+int sandbox_spi_get_emul(struct sandbox_state *state,
+ struct udevice *bus, struct udevice *slave,
+ struct udevice **emulp)
+{
+ struct sandbox_spi_info *info;
+ int busnum = bus->seq;
+ int cs = spi_chip_select(slave);
+ int ret;
+
+ info = &state->spi[busnum][cs];
+ if (!info->emul) {
+ /* Use the same device tree node as the SPI flash device */
+ debug("%s: busnum=%u, cs=%u: binding SPI flash emulation: ",
+ __func__, busnum, cs);
+ ret = sandbox_sf_bind_emul(state, busnum, cs, bus,
+ slave->of_offset, slave->name);
+ if (ret) {
+ debug("failed (err=%d)\n", ret);
+ return ret;
+ }
+ debug("OK\n");
+ }
+ *emulp = info->emul;
+
+ return 0;
+}
+
+int dm_scan_other(bool pre_reloc_only)
+{
+ struct sandbox_state *state = state_get_current();
+ int busnum, cs;
+
+ if (pre_reloc_only)
+ return 0;
+ for (busnum = 0; busnum < CONFIG_SANDBOX_SPI_MAX_BUS; busnum++) {
+ for (cs = 0; cs < CONFIG_SANDBOX_SPI_MAX_CS; cs++) {
+ const char *spec = state->spi[busnum][cs].spec;
+ int ret;
+
+ if (spec) {
+ ret = sandbox_sf_bind_bus_cs(state, busnum,
+ cs, spec);
+ if (ret) {
+ debug("%s: Bind failed for bus %d, cs %d\n",
+ __func__, busnum, cs);
+ return ret;
+ }
+ }
+ }
+ }
+
+ return 0;
+}
+#endif
+
+static const struct udevice_id sandbox_sf_ids[] = {
+ { .compatible = "sandbox,spi-flash" },
+ { }
+};
+
+U_BOOT_DRIVER(sandbox_sf_emul) = {
+ .name = "sandbox_sf_emul",
+ .id = UCLASS_SPI_EMUL,
+ .of_match = sandbox_sf_ids,
+ .ofdata_to_platdata = sandbox_sf_ofdata_to_platdata,
+ .probe = sandbox_sf_probe,
+ .remove = sandbox_sf_remove,
+ .priv_auto_alloc_size = sizeof(struct sandbox_spi_flash),
+ .platdata_auto_alloc_size = sizeof(struct sandbox_spi_flash_plat_data),
+ .ops = &sandbox_sf_emul_ops,
+};
projects / u-boot.git / commitdiff