obj-y += cache_uniphier.o
obj-$(CONFIG_BOARD_POSTCLK_INIT) += board_postclk_init.o
obj-y += dram_init.o
+obj-$(CONFIG_DRAM_INIT) += ddrphy_training.o
obj-$(CONFIG_DISPLAY_CPUINFO) += cpu_info.o
obj-$(CONFIG_BOARD_EARLY_INIT_R) += board_early_init_r.o
obj-$(CONFIG_BOARD_LATE_INIT) += board_late_init.o
--- /dev/null
+/*
+ * Copyright (C) 2011-2014 Panasonic Corporation
+ * Author: Masahiro Yamada <yamada.m@jp.panasonic.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/ddrphy-regs.h>
+
+void ddrphy_prepare_training(struct ddrphy __iomem *phy, int rank)
+{
+ int dx;
+ u32 __iomem tmp, *p;
+
+ for (dx = 0; dx < NR_DATX8_PER_DDRPHY; dx++) {
+ p = &phy->dx[dx].gcr;
+
+ tmp = readl(p);
+ /* Specify the rank that should be write leveled */
+ tmp &= ~DXGCR_WLRKEN_MASK;
+ tmp |= (1 << (DXGCR_WLRKEN_SHIFT + rank)) & DXGCR_WLRKEN_MASK;
+ writel(tmp, p);
+ }
+
+ p = &phy->dtcr;
+
+ tmp = readl(p);
+ /* Specify the rank used during data bit deskew and eye centering */
+ tmp &= ~DTCR_DTRANK_MASK;
+ tmp |= (rank << DTCR_DTRANK_SHIFT) & DTCR_DTRANK_MASK;
+ /* Use Multi-Purpose Register for DQS gate training */
+ tmp |= DTCR_DTMPR;
+ /* Specify the rank enabled for data-training */
+ tmp &= ~DTCR_RNKEN_MASK;
+ tmp |= (1 << (DTCR_RNKEN_SHIFT + rank)) & DTCR_RNKEN_MASK;
+ writel(tmp, p);
+}
+
+struct ddrphy_init_sequence {
+ char *description;
+ u32 init_flag;
+ u32 done_flag;
+ u32 err_flag;
+};
+
+static struct ddrphy_init_sequence init_sequence[] = {
+ {
+ "DRAM Initialization",
+ PIR_DRAMRST | PIR_DRAMINIT,
+ PGSR0_DIDONE,
+ PGSR0_DIERR
+ },
+ {
+ "Write Leveling",
+ PIR_WL,
+ PGSR0_WLDONE,
+ PGSR0_WLERR
+ },
+ {
+ "Read DQS Gate Training",
+ PIR_QSGATE,
+ PGSR0_QSGDONE,
+ PGSR0_QSGERR
+ },
+ {
+ "Write Leveling Adjustment",
+ PIR_WLADJ,
+ PGSR0_WLADONE,
+ PGSR0_WLAERR
+ },
+ {
+ "Read Bit Deskew",
+ PIR_RDDSKW,
+ PGSR0_RDDONE,
+ PGSR0_RDERR
+ },
+ {
+ "Write Bit Deskew",
+ PIR_WRDSKW,
+ PGSR0_WDDONE,
+ PGSR0_WDERR
+ },
+ {
+ "Read Eye Training",
+ PIR_RDEYE,
+ PGSR0_REDONE,
+ PGSR0_REERR
+ },
+ {
+ "Write Eye Training",
+ PIR_WREYE,
+ PGSR0_WEDONE,
+ PGSR0_WEERR
+ }
+};
+
+int ddrphy_training(struct ddrphy __iomem *phy)
+{
+ int i;
+ u32 pgsr0;
+ u32 init_flag = PIR_INIT;
+ u32 done_flag = PGSR0_IDONE;
+ int timeout = 50000; /* 50 msec is long enough */
+#ifdef DISPLAY_ELAPSED_TIME
+ ulong start = get_timer(0);
+#endif
+
+ for (i = 0; i < ARRAY_SIZE(init_sequence); i++) {
+ init_flag |= init_sequence[i].init_flag;
+ done_flag |= init_sequence[i].done_flag;
+ }
+
+ writel(init_flag, &phy->pir);
+
+ do {
+ if (--timeout < 0) {
+#ifndef CONFIG_SPL_BUILD
+ printf("%s: error: timeout during DDR training\n",
+ __func__);
+#endif
+ return -1;
+ }
+ udelay(1);
+ pgsr0 = readl(&phy->pgsr[0]);
+ } while ((pgsr0 & done_flag) != done_flag);
+
+ for (i = 0; i < ARRAY_SIZE(init_sequence); i++) {
+ if (pgsr0 & init_sequence[i].err_flag) {
+#ifndef CONFIG_SPL_BUILD
+ printf("%s: error: %s failed\n", __func__,
+ init_sequence[i].description);
+#endif
+ return -1;
+ }
+ }
+
+#ifdef DISPLAY_ELAPSED_TIME
+ printf("%s: info: elapsed time %ld msec\n", get_timer(start));
+#endif
+
+ return 0;
+}
obj-$(CONFIG_SOC_INIT) += bcu_init.o sbc_init.o sg_init.o pll_init.o \
clkrst_init.o
obj-$(CONFIG_BOARD_POSTCLK_INIT) += pinctrl.o
-obj-$(CONFIG_DRAM_INIT) += pll_spectrum.o umc_init.o
+obj-$(CONFIG_DRAM_INIT) += pll_spectrum.o umc_init.o ddrphy_init.o
--- /dev/null
+/*
+ * Copyright (C) 2014 Panasonic Corporation
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <linux/types.h>
+#include <asm/io.h>
+#include <asm/arch/ddrphy-regs.h>
+
+void ddrphy_init(struct ddrphy __iomem *phy, int freq, int size)
+{
+ u32 tmp;
+
+ writel(0x0300c473, &phy->pgcr[1]);
+ if (freq == 1333) {
+ writel(0x0a806844, &phy->ptr[0]);
+ writel(0x208e0124, &phy->ptr[1]);
+ } else {
+ writel(0x0c807d04, &phy->ptr[0]);
+ writel(0x2710015E, &phy->ptr[1]);
+ }
+ writel(0x00083DEF, &phy->ptr[2]);
+ if (freq == 1333) {
+ writel(0x0f051616, &phy->ptr[3]);
+ writel(0x06ae08d6, &phy->ptr[4]);
+ } else {
+ writel(0x12061A80, &phy->ptr[3]);
+ writel(0x08027100, &phy->ptr[4]);
+ }
+ writel(0xF004001A, &phy->dsgcr);
+
+ /* change the value of the on-die pull-up/pull-down registors */
+ tmp = readl(&phy->dxccr);
+ tmp &= ~0x0ee0;
+ tmp |= DXCCR_DQSNRES_688_OHM | DXCCR_DQSRES_688_OHM;
+ writel(tmp, &phy->dxccr);
+
+ writel(0x0000040B, &phy->dcr);
+ if (freq == 1333) {
+ writel(0x85589955, &phy->dtpr[0]);
+ if (size == 1)
+ writel(0x1a8253c0, &phy->dtpr[1]);
+ else
+ writel(0x1a8363c0, &phy->dtpr[1]);
+ writel(0x5002c200, &phy->dtpr[2]);
+ writel(0x00000b51, &phy->mr0);
+ } else {
+ writel(0x999cbb66, &phy->dtpr[0]);
+ if (size == 1)
+ writel(0x1a82dbc0, &phy->dtpr[1]);
+ else
+ writel(0x1a878400, &phy->dtpr[1]);
+ writel(0xa00214f8, &phy->dtpr[2]);
+ writel(0x00000d71, &phy->mr0);
+ }
+ writel(0x00000006, &phy->mr1);
+ if (freq == 1333)
+ writel(0x00000290, &phy->mr2);
+ else
+ writel(0x00000298, &phy->mr2);
+
+ writel(0x00000800, &phy->mr3);
+
+ while (!(readl(&phy->pgsr[0]) & PGSR0_IDONE))
+ ;
+
+ writel(0x0300C473, &phy->pgcr[1]);
+ writel(0x0000005D, &phy->zq[0].cr[1]);
+}
#include <common.h>
#include <asm/io.h>
#include <asm/arch/umc-regs.h>
+#include <asm/arch/ddrphy-regs.h>
static inline void umc_start_ssif(void __iomem *ssif_base)
{
void __iomem *ca_base1 = (void __iomem *)UMC_CA_BASE(1);
void __iomem *dramcont0 = (void __iomem *)UMC_DRAMCONT_BASE(0);
void __iomem *dramcont1 = (void __iomem *)UMC_DRAMCONT_BASE(1);
+ void __iomem *phy0_0 = (void __iomem *)DDRPHY_BASE(0, 0);
+ void __iomem *phy1_0 = (void __iomem *)DDRPHY_BASE(1, 0);
umc_dram_init_start(dramcont0);
umc_dram_init_start(dramcont1);
writel(0x00000101, dramcont0 + UMC_DIOCTLA);
+ ddrphy_init(phy0_0, freq, size_ch0);
+
+ ddrphy_prepare_training(phy0_0, 0);
+ ddrphy_training(phy0_0);
+
writel(0x00000101, dramcont1 + UMC_DIOCTLA);
+ ddrphy_init(phy1_0, freq, size_ch1);
+
+ ddrphy_prepare_training(phy1_0, 1);
+ ddrphy_training(phy1_0);
+
umc_dramcont_init(dramcont0, ca_base0, size_ch0, freq);
umc_dramcont_init(dramcont1, ca_base1, size_ch1, freq);
obj-y += boot-mode.o
obj-$(CONFIG_SOC_INIT) += sbc_init.o sg_init.o pll_init.o clkrst_init.o
obj-$(CONFIG_BOARD_POSTCLK_INIT) += pinctrl.o
-obj-$(CONFIG_DRAM_INIT) += pll_spectrum.o umc_init.o
+obj-$(CONFIG_DRAM_INIT) += pll_spectrum.o umc_init.o ddrphy_init.o
--- /dev/null
+/*
+ * Copyright (C) 2014 Panasonic Corporation
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <linux/types.h>
+#include <asm/io.h>
+#include <asm/arch/ddrphy-regs.h>
+
+void ddrphy_init(struct ddrphy __iomem *phy, int freq, int size)
+{
+ u32 tmp;
+
+ writel(0x0300c473, &phy->pgcr[1]);
+ if (freq == 1333) {
+ writel(0x0a806844, &phy->ptr[0]);
+ writel(0x208e0124, &phy->ptr[1]);
+ } else {
+ writel(0x0c807d04, &phy->ptr[0]);
+ writel(0x2710015E, &phy->ptr[1]);
+ }
+ writel(0x00083DEF, &phy->ptr[2]);
+ if (freq == 1333) {
+ writel(0x0f051616, &phy->ptr[3]);
+ writel(0x06ae08d6, &phy->ptr[4]);
+ } else {
+ writel(0x12061A80, &phy->ptr[3]);
+ writel(0x08027100, &phy->ptr[4]);
+ }
+ writel(0xF004001A, &phy->dsgcr);
+
+ /* change the value of the on-die pull-up/pull-down registors */
+ tmp = readl(&phy->dxccr);
+ tmp &= ~0x0ee0;
+ tmp |= DXCCR_DQSNRES_688_OHM | DXCCR_DQSRES_688_OHM;
+ writel(tmp, &phy->dxccr);
+
+ writel(0x0000040B, &phy->dcr);
+ if (freq == 1333) {
+ writel(0x85589955, &phy->dtpr[0]);
+ if (size == 1)
+ writel(0x1a8363c0, &phy->dtpr[1]);
+ else
+ writel(0x1a8363c0, &phy->dtpr[1]);
+ writel(0x5002c200, &phy->dtpr[2]);
+ writel(0x00000b51, &phy->mr0);
+ } else {
+ writel(0x999cbb66, &phy->dtpr[0]);
+ if (size == 1)
+ writel(0x1a878400, &phy->dtpr[1]);
+ else
+ writel(0x1a878400, &phy->dtpr[1]);
+ writel(0xa00214f8, &phy->dtpr[2]);
+ writel(0x00000d71, &phy->mr0);
+ }
+ writel(0x00000006, &phy->mr1);
+ if (freq == 1333)
+ writel(0x00000290, &phy->mr2);
+ else
+ writel(0x00000298, &phy->mr2);
+
+ writel(0x00000000, &phy->mr3);
+
+ while (!(readl(&phy->pgsr[0]) & PGSR0_IDONE))
+ ;
+
+ writel(0x0300C473, &phy->pgcr[1]);
+ writel(0x0000005D, &phy->zq[0].cr[1]);
+}
#include <common.h>
#include <asm/io.h>
#include <asm/arch/umc-regs.h>
+#include <asm/arch/ddrphy-regs.h>
static inline void umc_start_ssif(void __iomem *ssif_base)
{
void __iomem *ca_base1 = (void __iomem *)UMC_CA_BASE(1);
void __iomem *dramcont0 = (void __iomem *)UMC_DRAMCONT_BASE(0);
void __iomem *dramcont1 = (void __iomem *)UMC_DRAMCONT_BASE(1);
+ void __iomem *phy0_0 = (void __iomem *)DDRPHY_BASE(0, 0);
+ void __iomem *phy0_1 = (void __iomem *)DDRPHY_BASE(0, 1);
+ void __iomem *phy1_0 = (void __iomem *)DDRPHY_BASE(1, 0);
+ void __iomem *phy1_1 = (void __iomem *)DDRPHY_BASE(1, 1);
umc_dram_init_start(dramcont0);
umc_dram_init_start(dramcont1);
writel(0x00000101, dramcont0 + UMC_DIOCTLA);
+ ddrphy_init(phy0_0, freq, size_ch0);
+
+ ddrphy_prepare_training(phy0_0, 0);
+ ddrphy_training(phy0_0);
+
writel(0x00000103, dramcont0 + UMC_DIOCTLA);
+ ddrphy_init(phy0_1, freq, size_ch0);
+
+ ddrphy_prepare_training(phy0_1, 1);
+ ddrphy_training(phy0_1);
+
writel(0x00000101, dramcont1 + UMC_DIOCTLA);
+ ddrphy_init(phy1_0, freq, size_ch1);
+
+ ddrphy_prepare_training(phy1_0, 0);
+ ddrphy_training(phy1_0);
+
writel(0x00000103, dramcont1 + UMC_DIOCTLA);
+ ddrphy_init(phy1_1, freq, size_ch1);
+
+ ddrphy_prepare_training(phy1_1, 1);
+ ddrphy_training(phy1_1);
+
umc_dramcont_init(dramcont0, ca_base0, size_ch0, freq);
umc_dramcont_init(dramcont1, ca_base1, size_ch1, freq);
obj-$(CONFIG_SOC_INIT) += bcu_init.o sbc_init.o sg_init.o pll_init.o \
clkrst_init.o
obj-$(CONFIG_BOARD_POSTCLK_INIT) += pinctrl.o
-obj-$(CONFIG_DRAM_INIT) += pll_spectrum.o umc_init.o
+obj-$(CONFIG_DRAM_INIT) += pll_spectrum.o umc_init.o ddrphy_init.o
--- /dev/null
+/*
+ * Copyright (C) 2014 Panasonic Corporation
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <config.h>
+#include <linux/types.h>
+#include <asm/io.h>
+#include <asm/arch/ddrphy-regs.h>
+
+void ddrphy_init(struct ddrphy __iomem *phy, int freq, int size)
+{
+ u32 tmp;
+
+ writel(0x0300c473, &phy->pgcr[1]);
+ if (freq == 1333) {
+ writel(0x0a806844, &phy->ptr[0]);
+ writel(0x208e0124, &phy->ptr[1]);
+ } else {
+ writel(0x0c807d04, &phy->ptr[0]);
+ writel(0x2710015E, &phy->ptr[1]);
+ }
+ writel(0x00083DEF, &phy->ptr[2]);
+ if (freq == 1333) {
+ writel(0x0f051616, &phy->ptr[3]);
+ writel(0x06ae08d6, &phy->ptr[4]);
+ } else {
+ writel(0x12061A80, &phy->ptr[3]);
+ writel(0x08027100, &phy->ptr[4]);
+ }
+ writel(0xF004001A, &phy->dsgcr);
+
+ /* change the value of the on-die pull-up/pull-down registors */
+ tmp = readl(&phy->dxccr);
+ tmp &= ~0x0ee0;
+ tmp |= DXCCR_DQSNRES_688_OHM | DXCCR_DQSRES_688_OHM;
+ writel(tmp, &phy->dxccr);
+
+ writel(0x0000040B, &phy->dcr);
+ if (freq == 1333) {
+ writel(0x85589955, &phy->dtpr[0]);
+ if (size == 1)
+ writel(0x1a8363c0, &phy->dtpr[1]);
+ else
+ writel(0x1a8363c0, &phy->dtpr[1]);
+ writel(0x5002c200, &phy->dtpr[2]);
+ writel(0x00000b51, &phy->mr0);
+ } else {
+ writel(0x999cbb66, &phy->dtpr[0]);
+ if (size == 1)
+ writel(0x1a878400, &phy->dtpr[1]);
+ else
+ writel(0x1a878400, &phy->dtpr[1]);
+ writel(0xa00214f8, &phy->dtpr[2]);
+ writel(0x00000d71, &phy->mr0);
+ }
+ writel(0x00000006, &phy->mr1);
+ if (freq == 1333)
+ writel(0x00000290, &phy->mr2);
+ else
+ writel(0x00000298, &phy->mr2);
+
+#ifdef CONFIG_DDR_STANDARD
+ writel(0x00000000, &phy->mr3);
+#else
+ writel(0x00000800, &phy->mr3);
+#endif
+
+ while (!(readl(&phy->pgsr[0]) & PGSR0_IDONE))
+ ;
+
+ writel(0x0300C473, &phy->pgcr[1]);
+ writel(0x0000005D, &phy->zq[0].cr[1]);
+}
#include <common.h>
#include <asm/io.h>
#include <asm/arch/umc-regs.h>
+#include <asm/arch/ddrphy-regs.h>
static inline void umc_start_ssif(void __iomem *ssif_base)
{
void __iomem *ca_base1 = (void __iomem *)UMC_CA_BASE(1);
void __iomem *dramcont0 = (void __iomem *)UMC_DRAMCONT_BASE(0);
void __iomem *dramcont1 = (void __iomem *)UMC_DRAMCONT_BASE(1);
+ void __iomem *phy0_0 = (void __iomem *)DDRPHY_BASE(0, 0);
+ void __iomem *phy1_0 = (void __iomem *)DDRPHY_BASE(1, 0);
umc_dram_init_start(dramcont0);
umc_dram_init_start(dramcont1);
writel(0x00000101, dramcont0 + UMC_DIOCTLA);
+ ddrphy_init(phy0_0, freq, size_ch0);
+
+ ddrphy_prepare_training(phy0_0, 0);
+ ddrphy_training(phy0_0);
+
writel(0x00000101, dramcont1 + UMC_DIOCTLA);
+ ddrphy_init(phy1_0, freq, size_ch1);
+
+ ddrphy_prepare_training(phy1_0, 1);
+ ddrphy_training(phy1_0);
+
umc_dramcont_init(dramcont0, ca_base0, size_ch0, freq);
umc_dramcont_init(dramcont1, ca_base1, size_ch1, freq);
--- /dev/null
+/*
+ * UniPhier DDR PHY registers
+ *
+ * Copyright (C) 2014 Panasonic Corporation
+ * Author: Masahiro Yamada <yamada.m@jp.panasonic.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef ARCH_DDRPHY_REGS_H
+#define ARCH_DDRPHY_REGS_H
+
+#include <linux/compiler.h>
+
+#ifndef __ASSEMBLY__
+
+struct ddrphy {
+ u32 ridr; /* Revision Identification Register */
+ u32 pir; /* PHY Initialixation Register */
+ u32 pgcr[2]; /* PHY General Configuration Register */
+ u32 pgsr[2]; /* PHY General Status Register */
+ u32 pllcr; /* PLL Control Register */
+ u32 ptr[5]; /* PHY Timing Register */
+ u32 acmdlr; /* AC Master Delay Line Register */
+ u32 acbdlr; /* AC Bit Delay Line Register */
+ u32 aciocr; /* AC I/O Configuration Register */
+ u32 dxccr; /* DATX8 Common Configuration Register */
+ u32 dsgcr; /* DDR System General Configuration Register */
+ u32 dcr; /* DRAM Configuration Register */
+ u32 dtpr[3]; /* DRAM Timing Parameters Register */
+ u32 mr0; /* Mode Register 0 */
+ u32 mr1; /* Mode Register 1 */
+ u32 mr2; /* Mode Register 2 */
+ u32 mr3; /* Mode Register 3 */
+ u32 odtcr; /* ODT Configuration Register */
+ u32 dtcr; /* Data Training Configuration Register */
+ u32 dtar[4]; /* Data Training Address Register */
+ u32 dtdr[2]; /* Data Training Data Register */
+ u32 dtedr[2]; /* Data Training Eye Data Register */
+ u32 rsv0[13]; /* Reserved */
+ u32 dcuar; /* DCU Address Register */
+ u32 dcudr; /* DCU Data Register */
+ u32 dcurr; /* DCU Run Register */
+ u32 dculr; /* DCU Loop Register */
+ u32 dcugcr; /* DCU General Configuration Register */
+ u32 dcutpr; /* DCU Timing Parameters Register */
+ u32 dcusr[2]; /* DCU Status Register */
+ u32 rsv1[8]; /* Reserved */
+ u32 bistrr; /* BIST Run Register */
+ u32 bistwcr; /* BIST Word Count Register */
+ u32 bistmskr[3]; /* BIST Mask Register */
+ u32 bistlsr; /* BIST LFSR Sed Register */
+ u32 bistar[3]; /* BIST Address Register */
+ u32 bistudpr; /* BIST User Data Pattern Register */
+ u32 bistgsr; /* BIST General Status Register */
+ u32 bistwer; /* BIST Word Error Register */
+ u32 bistber[4]; /* BIST Bit Error Register */
+ u32 bistwcsr; /* BIST Word Count Status Register */
+ u32 bistfwr[3]; /* BIST Fail Word Register */
+ u32 rsv2[10]; /* Reserved */
+ u32 gpr[2]; /* General Purpose Register */
+ struct ddrphy_zq { /* ZQ */
+ u32 cr[2]; /* Impedance Control Register */
+ u32 sr[2]; /* Impedance Status Register */
+ } zq[4];
+ struct ddrphy_datx8 { /* DATX8 */
+ u32 gcr; /* General Configuration Register */
+ u32 gsr[2]; /* General Status Register */
+ u32 bdlr[5]; /* Bit Delay Line Register */
+ u32 lcdlr[3]; /* Local Calibrated Delay Line Register */
+ u32 mdlr; /* Master Delay Line Register */
+ u32 gtr; /* General Timing Register */
+ u32 rsv[3]; /* Reserved */
+ } dx[9];
+} __packed;
+
+#endif /* __ASSEMBLY__ */
+
+#define PIR_INIT (1 << 0) /* Initialization Trigger */
+#define PIR_ZCAL (1 << 1) /* Impedance Calibration */
+#define PIR_PLLINIT (1 << 4) /* PLL Initialization */
+#define PIR_DCAL (1 << 5) /* DDL Calibration */
+#define PIR_PHYRST (1 << 6) /* PHY Reset */
+#define PIR_DRAMRST (1 << 7) /* DRAM Reset */
+#define PIR_DRAMINIT (1 << 8) /* DRAM Initialization */
+#define PIR_WL (1 << 9) /* Write Leveling */
+#define PIR_QSGATE (1 << 10) /* Read DQS Gate Training */
+#define PIR_WLADJ (1 << 11) /* Write Leveling Adjust */
+#define PIR_RDDSKW (1 << 12) /* Read Data Bit Deskew */
+#define PIR_WRDSKW (1 << 13) /* Write Data Bit Deskew */
+#define PIR_RDEYE (1 << 14) /* Read Data Eye Training */
+#define PIR_WREYE (1 << 15) /* Write Data Eye Training */
+#define PIR_LOCKBYP (1 << 28) /* PLL Lock Bypass */
+#define PIR_DCALBYP (1 << 29) /* DDL Calibration Bypass */
+#define PIR_ZCALBYP (1 << 30) /* Impedance Calib Bypass */
+#define PIR_INITBYP (1 << 31) /* Initialization Bypass */
+
+#define PGSR0_IDONE (1 << 0) /* Initialization Done */
+#define PGSR0_PLDONE (1 << 1) /* PLL Lock Done */
+#define PGSR0_DCDONE (1 << 2) /* DDL Calibration Done */
+#define PGSR0_ZCDONE (1 << 3) /* Impedance Calibration Done */
+#define PGSR0_DIDONE (1 << 4) /* DRAM Initialization Done */
+#define PGSR0_WLDONE (1 << 5) /* Write Leveling Done */
+#define PGSR0_QSGDONE (1 << 6) /* DQS Gate Training Done */
+#define PGSR0_WLADONE (1 << 7) /* Write Leveling Adjust Done */
+#define PGSR0_RDDONE (1 << 8) /* Read Bit Deskew Done */
+#define PGSR0_WDDONE (1 << 9) /* Write Bit Deskew Done */
+#define PGSR0_REDONE (1 << 10) /* Read Eye Training Done */
+#define PGSR0_WEDONE (1 << 11) /* Write Eye Training Done */
+#define PGSR0_IERR (1 << 16) /* Initialization Error */
+#define PGSR0_PLERR (1 << 17) /* PLL Lock Error */
+#define PGSR0_DCERR (1 << 18) /* DDL Calibration Error */
+#define PGSR0_ZCERR (1 << 19) /* Impedance Calib Error */
+#define PGSR0_DIERR (1 << 20) /* DRAM Initialization Error */
+#define PGSR0_WLERR (1 << 21) /* Write Leveling Error */
+#define PGSR0_QSGERR (1 << 22) /* DQS Gate Training Error */
+#define PGSR0_WLAERR (1 << 23) /* Write Leveling Adj Error */
+#define PGSR0_RDERR (1 << 24) /* Read Bit Deskew Error */
+#define PGSR0_WDERR (1 << 25) /* Write Bit Deskew Error */
+#define PGSR0_REERR (1 << 26) /* Read Eye Training Error */
+#define PGSR0_WEERR (1 << 27) /* Write Eye Training Error */
+#define PGSR0_DTERR_SHIFT 28 /* Data Training Error Status*/
+#define PGSR0_DTERR (7 << (PGSR0_DTERR_SHIFT))
+#define PGSR0_APLOCK (1 << 31) /* AC PLL Lock */
+
+#define DXCCR_DQSRES_OPEN (0 << 5)
+#define DXCCR_DQSRES_688_OHM (1 << 5)
+#define DXCCR_DQSRES_611_OHM (2 << 5)
+#define DXCCR_DQSRES_550_OHM (3 << 5)
+#define DXCCR_DQSRES_500_OHM (4 << 5)
+#define DXCCR_DQSRES_458_OHM (5 << 5)
+#define DXCCR_DQSRES_393_OHM (6 << 5)
+#define DXCCR_DQSRES_344_OHM (7 << 5)
+
+#define DXCCR_DQSNRES_OPEN (0 << 9)
+#define DXCCR_DQSNRES_688_OHM (1 << 9)
+#define DXCCR_DQSNRES_611_OHM (2 << 9)
+#define DXCCR_DQSNRES_550_OHM (3 << 9)
+#define DXCCR_DQSNRES_500_OHM (4 << 9)
+#define DXCCR_DQSNRES_458_OHM (5 << 9)
+#define DXCCR_DQSNRES_393_OHM (6 << 9)
+#define DXCCR_DQSNRES_344_OHM (7 << 9)
+
+#define DTCR_DTRANK_SHIFT 4 /* Data Training Rank */
+#define DTCR_DTRANK_MASK (0x3 << (DTCR_DTRANK_SHIFT))
+#define DTCR_DTMPR (1 << 6) /* Data Training using MPR */
+#define DTCR_RNKEN_SHIFT 24 /* Rank Enable */
+#define DTCR_RNKEN_MASK (0xf << (DTCR_RNKEN_SHIFT))
+
+#define DXGCR_WLRKEN_SHIFT 26 /* Write Level Rank Enable */
+#define DXGCR_WLRKEN_MASK (0xf << (DXGCR_WLRKEN_SHIFT))
+
+/* SoC-specific parameters */
+#define NR_DATX8_PER_DDRPHY 2
+
+#if defined(CONFIG_MACH_PH1_LD4) || defined(CONFIG_MACH_PH1_SLD8)
+#define NR_DDRPHY_PER_CH 1
+#else
+#define NR_DDRPHY_PER_CH 2
+#endif
+
+#define NR_DDRCH 2
+
+#define DDRPHY_BASE(ch, phy) (0x5bc01000 + 0x200000 * (ch) + 0x1000 * (phy))
+
+#ifndef __ASSEMBLY__
+void ddrphy_init(struct ddrphy __iomem *phy, int freq, int size);
+void ddrphy_prepare_training(struct ddrphy __iomem *phy, int rank);
+int ddrphy_training(struct ddrphy __iomem *phy);
+#endif
+
+#endif /* ARCH_DDRPHY_REGS_H */
projects / u-boot.git / commitdiff