CPCI4052 PPC405GP
CPCI405AB PPC405GP
CPCI405DT PPC405GP
- CPCI440 PPC440GP
CPCIISER4 PPC405GP
DASA_SIM IOP480 (PPC401)
DP405 PPC405EP
CPCI4052 \
CPCI405AB \
CPCI405DT \
- CPCI440 \
CPCIISER4 \
CRAYL1 \
csb272 \
@$(MKCONFIG) $(@:_config=) ppc ppc4xx cpci405 esd
@echo "BOARD_REVISION = $(@:_config=)" >> $(obj)include/config.mk
-CPCI440_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx cpci440 esd
-
CPCIISER4_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx cpciiser4 esd
+++ /dev/null
-#
-# (C) Copyright 2002-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-ifneq ($(OBJTREE),$(SRCTREE))
-$(shell mkdir -p $(obj)../common)
-endif
-
-LIB = $(obj)lib$(BOARD).a
-
-COBJS = $(BOARD).o strataflash.o ../common/misc.o
-SOBJS = init.o
-
-SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS))
-SOBJS := $(addprefix $(obj),$(SOBJS))
-
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
-
-clean:
- rm -f $(SOBJS) $(OBJS)
-
-distclean: clean
- rm -f $(LIB) core *.bak .depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
+++ /dev/null
-#
-# (C) Copyright 2002
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#
-# esd ADCIOP boards
-#
-
-#TEXT_BASE = 0xFFFE0000
-
-ifeq ($(ramsym),1)
-TEXT_BASE = 0x07FD0000
-else
-TEXT_BASE = 0xFFFC0000
-#TEXT_BASE = 0x01fc0000
-endif
-
-PLATFORM_CPPFLAGS += -DCONFIG_440=1
-
-ifeq ($(debug),1)
-PLATFORM_CPPFLAGS += -DDEBUG
-endif
-
-ifeq ($(dbcr),1)
-PLATFORM_CPPFLAGS += -DCFG_INIT_DBCR=0x8cff0000
-endif
+++ /dev/null
-/*
- * (C) Copyright 2002
- * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-
-#include <common.h>
-#include <asm/processor.h>
-
-
-extern void lxt971_no_sleep(void);
-
-
-long int fixed_sdram( void );
-
-int board_early_init_f (void)
-{
- uint reg;
-
- /*--------------------------------------------------------------------
- * Setup the external bus controller/chip selects
- *-------------------------------------------------------------------*/
- mtdcr( ebccfga, xbcfg );
- reg = mfdcr( ebccfgd );
- mtdcr( ebccfgd, reg | 0x04000000 ); /* Set ATC */
-
- mtebc( pb0ap, 0x92015480 ); /* FLASH/SRAM */
- mtebc( pb0cr, 0xFF87A000 ); /* BAS=0xff8 8MB R/W 16-bit */
- /* test-only: other regs still missing... */
-
- /*--------------------------------------------------------------------
- * Setup the interrupt controller polarities, triggers, etc.
- *-------------------------------------------------------------------*/
- mtdcr( uic0sr, 0xffffffff ); /* clear all */
- mtdcr( uic0er, 0x00000000 ); /* disable all */
- mtdcr( uic0cr, 0x00000009 ); /* SMI & UIC1 crit are critical */
- mtdcr( uic0pr, 0xfffffe13 ); /* per ref-board manual */
- mtdcr( uic0tr, 0x01c00008 ); /* per ref-board manual */
- mtdcr( uic0vr, 0x00000001 ); /* int31 highest, base=0x000 */
- mtdcr( uic0sr, 0xffffffff ); /* clear all */
-
- mtdcr( uic1sr, 0xffffffff ); /* clear all */
- mtdcr( uic1er, 0x00000000 ); /* disable all */
- mtdcr( uic1cr, 0x00000000 ); /* all non-critical */
- mtdcr( uic1pr, 0xffffe0ff ); /* per ref-board manual */
- mtdcr( uic1tr, 0x00ffc000 ); /* per ref-board manual */
- mtdcr( uic1vr, 0x00000001 ); /* int31 highest, base=0x000 */
- mtdcr( uic1sr, 0xffffffff ); /* clear all */
-
- return 0;
-}
-
-
-int checkboard (void)
-{
- sys_info_t sysinfo;
- get_sys_info(&sysinfo);
-
- printf("Board: esd CPCI-440\n");
- printf("\tVCO: %lu MHz\n", sysinfo.freqVCOMhz/1000000);
- printf("\tCPU: %lu MHz\n", sysinfo.freqProcessor/1000000);
- printf("\tPLB: %lu MHz\n", sysinfo.freqPLB/1000000);
- printf("\tOPB: %lu MHz\n", sysinfo.freqOPB/1000000);
- printf("\tEBC: %lu MHz\n", sysinfo.freqEBC/1000000);
-
- /*
- * Disable sleep mode in LXT971
- */
- lxt971_no_sleep();
-
- return (0);
-}
-
-
-long int initdram (int board_type)
-{
- long dram_size = 0;
-
- dram_size = fixed_sdram();
- return dram_size;
-}
-
-
-/*************************************************************************
- * fixed sdram init -- doesn't use serial presence detect.
- *
- * Assumes: 64 MB, non-ECC, non-registered
- * PLB @ 133 MHz
- *
- ************************************************************************/
-long int fixed_sdram( void )
-{
- uint reg;
-
-#if 1 /* test-only */
- /*--------------------------------------------------------------------
- * Setup some default
- *------------------------------------------------------------------*/
- mtsdram( mem_uabba, 0x00000000 ); /* ubba=0 (default) */
- mtsdram( mem_slio, 0x00000000 ); /* rdre=0 wrre=0 rarw=0 */
- mtsdram( mem_devopt,0x00000000 ); /* dll=0 ds=0 (normal) */
- mtsdram( mem_wddctr,0x40000000 ); /* wrcp=0 dcd=0 */
- mtsdram( mem_clktr, 0x40000000 ); /* clkp=1 (90 deg wr) dcdt=0 */
-
- /*--------------------------------------------------------------------
- * Setup for board-specific specific mem
- *------------------------------------------------------------------*/
- /*
- * Following for CAS Latency = 2.5 @ 133 MHz PLB
- */
- mtsdram( mem_b0cr, 0x00082001 );/* SDBA=0x000, 64MB, Mode 2, enabled*/
- mtsdram( mem_tr0, 0x410a4012 );/* WR=2 WD=1 CL=2.5 PA=3 CP=4 LD=2 */
- /* RA=10 RD=3 */
- mtsdram( mem_tr1, 0x8080082f );/* SS=T2 SL=STAGE 3 CD=1 CT=0x02f */
- mtsdram( mem_rtr, 0x08200000 );/* Rate 15.625 ns @ 133 MHz PLB */
- mtsdram( mem_cfg1, 0x00000000 );/* Self-refresh exit, disable PM */
- udelay( 400 ); /* Delay 200 usecs (min) */
-
- /*--------------------------------------------------------------------
- * Enable the controller, then wait for DCEN to complete
- *------------------------------------------------------------------*/
- mtsdram( mem_cfg0, 0x86000000 );/* DCEN=1, PMUD=1, 64-bit */
- for(;;)
- {
- mfsdram( mem_mcsts, reg );
- if( reg & 0x80000000 )
- break;
- }
-
- return( 64 * 1024 * 1024 ); /* 64 MB */
-#else
- return( 32 * 1024 * 1024 ); /* 64 MB */
-#endif
-}
+++ /dev/null
-/*
-* Copyright (C) 2002 Scott McNutt <smcnutt@artesyncp.com>
-*
-* See file CREDITS for list of people who contributed to this
-* project.
-*
-* This program is free software; you can redistribute it and/or
-* modify it under the terms of the GNU General Public License as
-* published by the Free Software Foundation; either version 2 of
-* the License, or (at your option) any later version.
-*
-* This program is distributed in the hope that it will be useful,
-* but WITHOUT ANY WARRANTY; without even the implied warranty of
-* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-* GNU General Public License for more details.
-*
-* You should have received a copy of the GNU General Public License
-* along with this program; if not, write to the Free Software
-* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-* MA 02111-1307 USA
-*/
-
-#include <ppc_asm.tmpl>
-#include <config.h>
-
-/* General */
-#define TLB_VALID 0x00000200
-
-/* Supported page sizes */
-
-#define SZ_1K 0x00000000
-#define SZ_4K 0x00000010
-#define SZ_16K 0x00000020
-#define SZ_64K 0x00000030
-#define SZ_256K 0x00000040
-#define SZ_1M 0x00000050
-#define SZ_16M 0x00000070
-#define SZ_256M 0x00000090
-
-/* Storage attributes */
-#define SA_W 0x00000800 /* Write-through */
-#define SA_I 0x00000400 /* Caching inhibited */
-#define SA_M 0x00000200 /* Memory coherence */
-#define SA_G 0x00000100 /* Guarded */
-#define SA_E 0x00000080 /* Endian */
-
-/* Access control */
-#define AC_X 0x00000024 /* Execute */
-#define AC_W 0x00000012 /* Write */
-#define AC_R 0x00000009 /* Read */
-
-/* Some handy macros */
-
-#define EPN(e) ((e) & 0xfffffc00)
-#define TLB0(epn,sz) ( (EPN((epn)) | (sz) | TLB_VALID ) )
-#define TLB1(rpn,erpn) ( ((rpn)&0xfffffc00) | (erpn) )
-#define TLB2(a) ( (a)&0x00000fbf )
-
-#define tlbtab_start\
- mflr r1 ;\
- bl 0f ;
-
-#define tlbtab_end\
- .long 0, 0, 0 ; \
-0: mflr r0 ; \
- mtlr r1 ; \
- blr ;
-
-#define tlbentry(epn,sz,rpn,erpn,attr)\
- .long TLB0(epn,sz),TLB1(rpn,erpn),TLB2(attr)
-
-
-/**************************************************************************
- * TLB TABLE
- *
- * This table is used by the cpu boot code to setup the initial tlb
- * entries. Rather than make broad assumptions in the cpu source tree,
- * this table lets each board set things up however they like.
- *
- * Pointer to the table is returned in r1
- *
- *************************************************************************/
-
- .section .bootpg,"ax"
- .globl tlbtab
-
-tlbtab:
- tlbtab_start
- tlbentry( 0xf0000000, SZ_256M, 0xf0000000, 1, AC_R|AC_W|AC_X|SA_G|SA_I)
- tlbentry( CFG_PERIPHERAL_BASE, SZ_256M, 0x40000000, 1, AC_R|AC_W|SA_G|SA_I)
- tlbentry( CFG_ISRAM_BASE, SZ_4K, 0x80000000, 0, AC_R|AC_W|AC_X )
- tlbentry( CFG_ISRAM_BASE + 0x1000, SZ_4K, 0x80001000, 0, AC_R|AC_W|AC_X )
- tlbentry( CFG_SDRAM_BASE, SZ_256M, 0x00000000, 0, AC_R|AC_W|AC_X )
- tlbtab_end
+++ /dev/null
-/*
- * (C) Copyright 2002
- * Brad Kemp, Seranoa Networks, Brad.Kemp@seranoa.com
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/processor.h>
-
-#undef DEBUG_FLASH
-/*
- * This file implements a Common Flash Interface (CFI) driver for U-Boot.
- * The width of the port and the width of the chips are determined at initialization.
- * These widths are used to calculate the address for access CFI data structures.
- * It has been tested on an Intel Strataflash implementation.
- *
- * References
- * JEDEC Standard JESD68 - Common Flash Interface (CFI)
- * JEDEC Standard JEP137-A Common Flash Interface (CFI) ID Codes
- * Intel Application Note 646 Common Flash Interface (CFI) and Command Sets
- * Intel 290667-008 3 Volt Intel StrataFlash Memory datasheet
- *
- * TODO
- * Use Primary Extended Query table (PRI) and Alternate Algorithm Query Table (ALT) to determine if protection is available
- * Add support for other command sets Use the PRI and ALT to determine command set
- * Verify erase and program timeouts.
- */
-
-#define FLASH_CMD_CFI 0x98
-#define FLASH_CMD_READ_ID 0x90
-#define FLASH_CMD_RESET 0xff
-#define FLASH_CMD_BLOCK_ERASE 0x20
-#define FLASH_CMD_ERASE_CONFIRM 0xD0
-#define FLASH_CMD_WRITE 0x40
-#define FLASH_CMD_PROTECT 0x60
-#define FLASH_CMD_PROTECT_SET 0x01
-#define FLASH_CMD_PROTECT_CLEAR 0xD0
-#define FLASH_CMD_CLEAR_STATUS 0x50
-#define FLASH_CMD_WRITE_TO_BUFFER 0xE8
-#define FLASH_CMD_WRITE_BUFFER_CONFIRM 0xD0
-
-#define FLASH_STATUS_DONE 0x80
-#define FLASH_STATUS_ESS 0x40
-#define FLASH_STATUS_ECLBS 0x20
-#define FLASH_STATUS_PSLBS 0x10
-#define FLASH_STATUS_VPENS 0x08
-#define FLASH_STATUS_PSS 0x04
-#define FLASH_STATUS_DPS 0x02
-#define FLASH_STATUS_R 0x01
-#define FLASH_STATUS_PROTECT 0x01
-
-#define FLASH_OFFSET_CFI 0x55
-#define FLASH_OFFSET_CFI_RESP 0x10
-#define FLASH_OFFSET_WTOUT 0x1F
-#define FLASH_OFFSET_WBTOUT 0x20
-#define FLASH_OFFSET_ETOUT 0x21
-#define FLASH_OFFSET_CETOUT 0x22
-#define FLASH_OFFSET_WMAX_TOUT 0x23
-#define FLASH_OFFSET_WBMAX_TOUT 0x24
-#define FLASH_OFFSET_EMAX_TOUT 0x25
-#define FLASH_OFFSET_CEMAX_TOUT 0x26
-#define FLASH_OFFSET_SIZE 0x27
-#define FLASH_OFFSET_INTERFACE 0x28
-#define FLASH_OFFSET_BUFFER_SIZE 0x2A
-#define FLASH_OFFSET_NUM_ERASE_REGIONS 0x2C
-#define FLASH_OFFSET_ERASE_REGIONS 0x2D
-#define FLASH_OFFSET_PROTECT 0x02
-#define FLASH_OFFSET_USER_PROTECTION 0x85
-#define FLASH_OFFSET_INTEL_PROTECTION 0x81
-
-
-#define FLASH_MAN_CFI 0x01000000
-
-
-typedef union {
- unsigned char c;
- unsigned short w;
- unsigned long l;
-} cfiword_t;
-
-typedef union {
- unsigned char * cp;
- unsigned short *wp;
- unsigned long *lp;
-} cfiptr_t;
-
-#define NUM_ERASE_REGIONS 4
-
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
-
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-
-
-static void flash_add_byte(flash_info_t *info, cfiword_t * cword, uchar c);
-static void flash_make_cmd(flash_info_t * info, uchar cmd, void * cmdbuf);
-static void flash_write_cmd(flash_info_t * info, int sect, uchar offset, uchar cmd);
-static int flash_isequal(flash_info_t * info, int sect, uchar offset, uchar cmd);
-static int flash_isset(flash_info_t * info, int sect, uchar offset, uchar cmd);
-static int flash_detect_cfi(flash_info_t * info);
-static ulong flash_get_size (ulong base, int banknum);
-static int flash_write_cfiword (flash_info_t *info, ulong dest, cfiword_t cword);
-static int flash_full_status_check(flash_info_t * info, ulong sector, ulong tout, char * prompt);
-#ifdef CFG_FLASH_USE_BUFFER_WRITE
-static int flash_write_cfibuffer(flash_info_t * info, ulong dest, uchar * cp, int len);
-#endif
-/*-----------------------------------------------------------------------
- * create an address based on the offset and the port width
- */
-inline uchar * flash_make_addr(flash_info_t * info, int sect, int offset)
-{
- return ((uchar *)(info->start[sect] + (offset * info->portwidth)));
-}
-/*-----------------------------------------------------------------------
- * read a character at a port width address
- */
-inline uchar flash_read_uchar(flash_info_t * info, uchar offset)
-{
- uchar *cp;
- cp = flash_make_addr(info, 0, offset);
- return (cp[info->portwidth - 1]);
-}
-
-/*-----------------------------------------------------------------------
- * read a short word by swapping for ppc format.
- */
-ushort flash_read_ushort(flash_info_t * info, int sect, uchar offset)
-{
- uchar * addr;
-
- addr = flash_make_addr(info, sect, offset);
- return ((addr[(2*info->portwidth) - 1] << 8) | addr[info->portwidth - 1]);
-
-}
-
-/*-----------------------------------------------------------------------
- * read a long word by picking the least significant byte of each maiximum
- * port size word. Swap for ppc format.
- */
-ulong flash_read_long(flash_info_t * info, int sect, uchar offset)
-{
- uchar * addr;
-
- addr = flash_make_addr(info, sect, offset);
- return ( (addr[(2*info->portwidth) - 1] << 24 ) | (addr[(info->portwidth) -1] << 16) |
- (addr[(4*info->portwidth) - 1] << 8) | addr[(3*info->portwidth) - 1]);
-
-}
-
-/*-----------------------------------------------------------------------
- */
-unsigned long flash_init (void)
-{
- unsigned long size;
- int i;
- unsigned long address;
-
-
- /* The flash is positioned back to back, with the demultiplexing of the chip
- * based on the A24 address line.
- *
- */
-
- address = CFG_FLASH_BASE;
- size = 0;
-
- /* Init: no FLASHes known */
- for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
- flash_info[i].flash_id = FLASH_UNKNOWN;
- size += flash_info[i].size = flash_get_size(address, i);
- address += CFG_FLASH_INCREMENT;
- if (flash_info[0].flash_id == FLASH_UNKNOWN) {
- printf ("## Unknown FLASH on Bank %d - Size = 0x%08lx = %ld MB\n",i,
- flash_info[0].size, flash_info[i].size<<20);
- }
- }
-
-#if 0 /* test-only */
- /* Monitor protection ON by default */
-#if (CFG_MONITOR_BASE >= CFG_FLASH_BASE)
- for(i=0; flash_info[0].start[i] < CFG_MONITOR_BASE+monitor_flash_len-1; i++)
- (void)flash_real_protect(&flash_info[0], i, 1);
-#endif
-#endif
-
- return (size);
-}
-
-/*-----------------------------------------------------------------------
- */
-int flash_erase (flash_info_t *info, int s_first, int s_last)
-{
- int rcode = 0;
- int prot;
- int sect;
-
- if( info->flash_id != FLASH_MAN_CFI) {
- printf ("Can't erase unknown flash type - aborted\n");
- return 1;
- }
- if ((s_first < 0) || (s_first > s_last)) {
- printf ("- no sectors to erase\n");
- return 1;
- }
-
- prot = 0;
- for (sect=s_first; sect<=s_last; ++sect) {
- if (info->protect[sect]) {
- prot++;
- }
- }
- if (prot) {
- printf ("- Warning: %d protected sectors will not be erased!\n",
- prot);
- } else {
- printf ("\n");
- }
-
-
- for (sect = s_first; sect<=s_last; sect++) {
- if (info->protect[sect] == 0) { /* not protected */
- flash_write_cmd(info, sect, 0, FLASH_CMD_CLEAR_STATUS);
- flash_write_cmd(info, sect, 0, FLASH_CMD_BLOCK_ERASE);
- flash_write_cmd(info, sect, 0, FLASH_CMD_ERASE_CONFIRM);
-
- if(flash_full_status_check(info, sect, info->erase_blk_tout, "erase")) {
- rcode = 1;
- } else
- printf(".");
- }
- }
- printf (" done\n");
- return rcode;
-}
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info (flash_info_t *info)
-{
- int i;
-
- if (info->flash_id != FLASH_MAN_CFI) {
- printf ("missing or unknown FLASH type\n");
- return;
- }
-
- printf("CFI conformant FLASH (%d x %d)",
- (info->portwidth << 3 ), (info->chipwidth << 3 ));
- printf (" Size: %ld MB in %d Sectors\n",
- info->size >> 20, info->sector_count);
- printf(" Erase timeout %ld ms, write timeout %ld ms, buffer write timeout %ld ms, buffer size %d\n",
- info->erase_blk_tout, info->write_tout, info->buffer_write_tout, info->buffer_size);
-
- printf (" Sector Start Addresses:");
- for (i=0; i<info->sector_count; ++i) {
- if ((i % 5) == 0)
- printf ("\n");
- printf (" %08lX%5s",
- info->start[i],
- info->protect[i] ? " (RO)" : " "
- );
- }
- printf ("\n");
- return;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
-{
- ulong wp;
- ulong cp;
- int aln;
- cfiword_t cword;
- int i, rc;
-
- /* get lower aligned address */
- wp = (addr & ~(info->portwidth - 1));
-
- /* handle unaligned start */
- if((aln = addr - wp) != 0) {
- cword.l = 0;
- cp = wp;
- for(i=0;i<aln; ++i, ++cp)
- flash_add_byte(info, &cword, (*(uchar *)cp));
-
- for(; (i< info->portwidth) && (cnt > 0) ; i++) {
- flash_add_byte(info, &cword, *src++);
- cnt--;
- cp++;
- }
- for(; (cnt == 0) && (i < info->portwidth); ++i, ++cp)
- flash_add_byte(info, &cword, (*(uchar *)cp));
- if((rc = flash_write_cfiword(info, wp, cword)) != 0)
- return rc;
- wp = cp;
- }
-
-#ifdef CFG_FLASH_USE_BUFFER_WRITE
- while(cnt >= info->portwidth) {
- i = info->buffer_size > cnt? cnt: info->buffer_size;
- if((rc = flash_write_cfibuffer(info, wp, src,i)) != ERR_OK)
- return rc;
- wp += i;
- src += i;
- cnt -=i;
- }
-#else
- /* handle the aligned part */
- while(cnt >= info->portwidth) {
- cword.l = 0;
- for(i = 0; i < info->portwidth; i++) {
- flash_add_byte(info, &cword, *src++);
- }
- if((rc = flash_write_cfiword(info, wp, cword)) != 0)
- return rc;
- wp += info->portwidth;
- cnt -= info->portwidth;
- }
-#endif /* CFG_FLASH_USE_BUFFER_WRITE */
- if (cnt == 0) {
- return (0);
- }
-
- /*
- * handle unaligned tail bytes
- */
- cword.l = 0;
- for (i=0, cp=wp; (i<info->portwidth) && (cnt>0); ++i, ++cp) {
- flash_add_byte(info, &cword, *src++);
- --cnt;
- }
- for (; i<info->portwidth; ++i, ++cp) {
- flash_add_byte(info, & cword, (*(uchar *)cp));
- }
-
- return flash_write_cfiword(info, wp, cword);
-}
-
-/*-----------------------------------------------------------------------
- */
-int flash_real_protect(flash_info_t *info, long sector, int prot)
-{
- int retcode = 0;
-
- flash_write_cmd(info, sector, 0, FLASH_CMD_CLEAR_STATUS);
- flash_write_cmd(info, sector, 0, FLASH_CMD_PROTECT);
- if(prot)
- flash_write_cmd(info, sector, 0, FLASH_CMD_PROTECT_SET);
- else
- flash_write_cmd(info, sector, 0, FLASH_CMD_PROTECT_CLEAR);
-
- if((retcode = flash_full_status_check(info, sector, info->erase_blk_tout,
- prot?"protect":"unprotect")) == 0) {
-
- info->protect[sector] = prot;
- /* Intel's unprotect unprotects all locking */
- if(prot == 0) {
- int i;
- for(i = 0 ; i<info->sector_count; i++) {
- if(info->protect[i])
- flash_real_protect(info, i, 1);
- }
- }
- }
-
- return retcode;
-}
-/*-----------------------------------------------------------------------
- * wait for XSR.7 to be set. Time out with an error if it does not.
- * This routine does not set the flash to read-array mode.
- */
-static int flash_status_check(flash_info_t * info, ulong sector, ulong tout, char * prompt)
-{
- ulong start;
-
- /* Wait for command completion */
- start = get_timer (0);
- while(!flash_isset(info, sector, 0, FLASH_STATUS_DONE)) {
- if (get_timer(start) > info->erase_blk_tout) {
- printf("Flash %s timeout at address %lx\n", prompt, info->start[sector]);
- flash_write_cmd(info, sector, 0, FLASH_CMD_RESET);
- return ERR_TIMOUT;
- }
- }
- return ERR_OK;
-}
-/*-----------------------------------------------------------------------
- * Wait for XSR.7 to be set, if it times out print an error, otherwise do a full status check.
- * This routine sets the flash to read-array mode.
- */
-static int flash_full_status_check(flash_info_t * info, ulong sector, ulong tout, char * prompt)
-{
- int retcode;
- retcode = flash_status_check(info, sector, tout, prompt);
- if((retcode == ERR_OK) && !flash_isequal(info,sector, 0, FLASH_STATUS_DONE)) {
- retcode = ERR_INVAL;
- printf("Flash %s error at address %lx\n", prompt,info->start[sector]);
- if(flash_isset(info, sector, 0, FLASH_STATUS_ECLBS | FLASH_STATUS_PSLBS)){
- printf("Command Sequence Error.\n");
- } else if(flash_isset(info, sector, 0, FLASH_STATUS_ECLBS)){
- printf("Block Erase Error.\n");
- retcode = ERR_NOT_ERASED;
- } else if (flash_isset(info, sector, 0, FLASH_STATUS_PSLBS)) {
- printf("Locking Error\n");
- }
- if(flash_isset(info, sector, 0, FLASH_STATUS_DPS)){
- printf("Block locked.\n");
- retcode = ERR_PROTECTED;
- }
- if(flash_isset(info, sector, 0, FLASH_STATUS_VPENS))
- printf("Vpp Low Error.\n");
- }
- flash_write_cmd(info, sector, 0, FLASH_CMD_RESET);
- return retcode;
-}
-/*-----------------------------------------------------------------------
- */
-static void flash_add_byte(flash_info_t *info, cfiword_t * cword, uchar c)
-{
- switch(info->portwidth) {
- case FLASH_CFI_8BIT:
- cword->c = c;
- break;
- case FLASH_CFI_16BIT:
- cword->w = (cword->w << 8) | c;
- break;
- case FLASH_CFI_32BIT:
- cword->l = (cword->l << 8) | c;
- }
-}
-
-
-/*-----------------------------------------------------------------------
- * make a proper sized command based on the port and chip widths
- */
-static void flash_make_cmd(flash_info_t * info, uchar cmd, void * cmdbuf)
-{
- int i;
- uchar *cp = (uchar *)cmdbuf;
- for(i=0; i< info->portwidth; i++)
- *cp++ = ((i+1) % info->chipwidth) ? '\0':cmd;
-}
-
-/*
- * Write a proper sized command to the correct address
- */
-static void flash_write_cmd(flash_info_t * info, int sect, uchar offset, uchar cmd)
-{
-
- volatile cfiptr_t addr;
- cfiword_t cword;
- addr.cp = flash_make_addr(info, sect, offset);
- flash_make_cmd(info, cmd, &cword);
- switch(info->portwidth) {
- case FLASH_CFI_8BIT:
- *addr.cp = cword.c;
- break;
- case FLASH_CFI_16BIT:
- *addr.wp = cword.w;
- break;
- case FLASH_CFI_32BIT:
- *addr.lp = cword.l;
- break;
- }
-}
-
-/*-----------------------------------------------------------------------
- */
-static int flash_isequal(flash_info_t * info, int sect, uchar offset, uchar cmd)
-{
- cfiptr_t cptr;
- cfiword_t cword;
- int retval;
- cptr.cp = flash_make_addr(info, sect, offset);
- flash_make_cmd(info, cmd, &cword);
- switch(info->portwidth) {
- case FLASH_CFI_8BIT:
- retval = (cptr.cp[0] == cword.c);
- break;
- case FLASH_CFI_16BIT:
- retval = (cptr.wp[0] == cword.w);
- break;
- case FLASH_CFI_32BIT:
- retval = (cptr.lp[0] == cword.l);
- break;
- default:
- retval = 0;
- break;
- }
- return retval;
-}
-/*-----------------------------------------------------------------------
- */
-static int flash_isset(flash_info_t * info, int sect, uchar offset, uchar cmd)
-{
- cfiptr_t cptr;
- cfiword_t cword;
- int retval;
- cptr.cp = flash_make_addr(info, sect, offset);
- flash_make_cmd(info, cmd, &cword);
- switch(info->portwidth) {
- case FLASH_CFI_8BIT:
- retval = ((cptr.cp[0] & cword.c) == cword.c);
- break;
- case FLASH_CFI_16BIT:
- retval = ((cptr.wp[0] & cword.w) == cword.w);
- break;
- case FLASH_CFI_32BIT:
- retval = ((cptr.lp[0] & cword.l) == cword.l);
- break;
- default:
- retval = 0;
- break;
- }
- return retval;
-}
-
-/*-----------------------------------------------------------------------
- * detect if flash is compatible with the Common Flash Interface (CFI)
- * http://www.jedec.org/download/search/jesd68.pdf
- *
- */
-static int flash_detect_cfi(flash_info_t * info)
-{
-
- for(info->portwidth=FLASH_CFI_8BIT; info->portwidth <= FLASH_CFI_32BIT;
- info->portwidth <<= 1) {
- for(info->chipwidth =FLASH_CFI_BY8;
- info->chipwidth <= info->portwidth;
- info->chipwidth <<= 1) {
- flash_write_cmd(info, 0, 0, FLASH_CMD_RESET);
- flash_write_cmd(info, 0, FLASH_OFFSET_CFI, FLASH_CMD_CFI);
- if(flash_isequal(info, 0, FLASH_OFFSET_CFI_RESP,'Q') &&
- flash_isequal(info, 0, FLASH_OFFSET_CFI_RESP + 1, 'R') &&
- flash_isequal(info, 0, FLASH_OFFSET_CFI_RESP + 2, 'Y'))
- return 1;
- }
- }
- return 0;
-}
-/*
- * The following code cannot be run from FLASH!
- *
- */
-static ulong flash_get_size (ulong base, int banknum)
-{
- flash_info_t * info = &flash_info[banknum];
- int i, j;
- int sect_cnt;
- unsigned long sector;
- unsigned long tmp;
- int size_ratio;
- uchar num_erase_regions;
- int erase_region_size;
- int erase_region_count;
-
- info->start[0] = base;
-
- if(flash_detect_cfi(info)){
-#ifdef DEBUG_FLASH
- printf("portwidth=%d chipwidth=%d\n", info->portwidth, info->chipwidth); /* test-only */
-#endif
- size_ratio = info->portwidth / info->chipwidth;
- num_erase_regions = flash_read_uchar(info, FLASH_OFFSET_NUM_ERASE_REGIONS);
-#ifdef DEBUG_FLASH
- printf("found %d erase regions\n", num_erase_regions);
-#endif
- sect_cnt = 0;
- sector = base;
- for(i = 0 ; i < num_erase_regions; i++) {
- if(i > NUM_ERASE_REGIONS) {
- printf("%d erase regions found, only %d used\n",
- num_erase_regions, NUM_ERASE_REGIONS);
- break;
- }
- tmp = flash_read_long(info, 0, FLASH_OFFSET_ERASE_REGIONS);
- erase_region_size = (tmp & 0xffff)? ((tmp & 0xffff) * 256): 128;
- tmp >>= 16;
- erase_region_count = (tmp & 0xffff) +1;
- for(j = 0; j< erase_region_count; j++) {
- info->start[sect_cnt] = sector;
- sector += (erase_region_size * size_ratio);
- info->protect[sect_cnt] = flash_isset(info, sect_cnt, FLASH_OFFSET_PROTECT, FLASH_STATUS_PROTECT);
- sect_cnt++;
- }
- }
-
- info->sector_count = sect_cnt;
- /* multiply the size by the number of chips */
- info->size = (1 << flash_read_uchar(info, FLASH_OFFSET_SIZE)) * size_ratio;
- info->buffer_size = (1 << flash_read_ushort(info, 0, FLASH_OFFSET_BUFFER_SIZE));
- tmp = 1 << flash_read_uchar(info, FLASH_OFFSET_ETOUT);
- info->erase_blk_tout = (tmp * (1 << flash_read_uchar(info, FLASH_OFFSET_EMAX_TOUT)));
- tmp = 1 << flash_read_uchar(info, FLASH_OFFSET_WBTOUT);
- info->buffer_write_tout = (tmp * (1 << flash_read_uchar(info, FLASH_OFFSET_WBMAX_TOUT)));
- tmp = 1 << flash_read_uchar(info, FLASH_OFFSET_WTOUT);
- info->write_tout = (tmp * (1 << flash_read_uchar(info, FLASH_OFFSET_WMAX_TOUT)))/ 1000;
- info->flash_id = FLASH_MAN_CFI;
- }
-
- flash_write_cmd(info, 0, 0, FLASH_CMD_RESET);
- return(info->size);
-}
-
-
-/*-----------------------------------------------------------------------
- */
-static int flash_write_cfiword (flash_info_t *info, ulong dest, cfiword_t cword)
-{
-
- cfiptr_t ctladdr;
- cfiptr_t cptr;
- int flag;
-
- ctladdr.cp = flash_make_addr(info, 0, 0);
- cptr.cp = (uchar *)dest;
-
-
- /* Check if Flash is (sufficiently) erased */
- switch(info->portwidth) {
- case FLASH_CFI_8BIT:
- flag = ((cptr.cp[0] & cword.c) == cword.c);
- break;
- case FLASH_CFI_16BIT:
- flag = ((cptr.wp[0] & cword.w) == cword.w);
- break;
- case FLASH_CFI_32BIT:
- flag = ((cptr.lp[0] & cword.l) == cword.l);
- break;
- default:
- return 2;
- }
- if(!flag)
- return 2;
-
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts();
-
- flash_write_cmd(info, 0, 0, FLASH_CMD_CLEAR_STATUS);
- flash_write_cmd(info, 0, 0, FLASH_CMD_WRITE);
-
- switch(info->portwidth) {
- case FLASH_CFI_8BIT:
- cptr.cp[0] = cword.c;
- break;
- case FLASH_CFI_16BIT:
- cptr.wp[0] = cword.w;
- break;
- case FLASH_CFI_32BIT:
- cptr.lp[0] = cword.l;
- break;
- }
-
- /* re-enable interrupts if necessary */
- if(flag)
- enable_interrupts();
-
- return flash_full_status_check(info, 0, info->write_tout, "write");
-}
-
-#ifdef CFG_FLASH_USE_BUFFER_WRITE
-
-/* loop through the sectors from the highest address
- * when the passed address is greater or equal to the sector address
- * we have a match
- */
-static int find_sector(flash_info_t *info, ulong addr)
-{
- int sector;
- for(sector = info->sector_count - 1; sector >= 0; sector--) {
- if(addr >= info->start[sector])
- break;
- }
- return sector;
-}
-
-static int flash_write_cfibuffer(flash_info_t * info, ulong dest, uchar * cp, int len)
-{
-
- int sector;
- int cnt;
- int retcode;
- volatile cfiptr_t src;
- volatile cfiptr_t dst;
-
- src.cp = cp;
- dst.cp = (uchar *)dest;
- sector = find_sector(info, dest);
- flash_write_cmd(info, sector, 0, FLASH_CMD_CLEAR_STATUS);
- flash_write_cmd(info, sector, 0, FLASH_CMD_WRITE_TO_BUFFER);
- if((retcode = flash_status_check(info, sector, info->buffer_write_tout,
- "write to buffer")) == ERR_OK) {
- switch(info->portwidth) {
- case FLASH_CFI_8BIT:
- cnt = len;
- break;
- case FLASH_CFI_16BIT:
- cnt = len >> 1;
- break;
- case FLASH_CFI_32BIT:
- cnt = len >> 2;
- break;
- default:
- return ERR_INVAL;
- break;
- }
- flash_write_cmd(info, sector, 0, (uchar)cnt-1);
- while(cnt-- > 0) {
- switch(info->portwidth) {
- case FLASH_CFI_8BIT:
- *dst.cp++ = *src.cp++;
- break;
- case FLASH_CFI_16BIT:
- *dst.wp++ = *src.wp++;
- break;
- case FLASH_CFI_32BIT:
- *dst.lp++ = *src.lp++;
- break;
- default:
- return ERR_INVAL;
- break;
- }
- }
- flash_write_cmd(info, sector, 0, FLASH_CMD_WRITE_BUFFER_CONFIRM);
- retcode = flash_full_status_check(info, sector, info->buffer_write_tout,
- "buffer write");
- }
- flash_write_cmd(info, sector, 0, FLASH_CMD_CLEAR_STATUS);
- return retcode;
-}
-#endif /* CFG_USE_FLASH_BUFFER_WRITE */
+++ /dev/null
-/*
- * (C) Copyright 2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
-SECTIONS
-{
- .resetvec 0xFFFFFFFC :
-/* .resetvec 0x01FFFFFC :*/
- {
- *(.resetvec)
- } = 0xffff
-
- .bootpg 0xFFFFF000 :
-/* .bootpg 0x01FFF000 :*/
- {
- cpu/ppc4xx/start.o (.bootpg)
- } = 0xffff
-
- /* Read-only sections, merged into text segment: */
- . = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
- .text :
- {
- /* WARNING - the following is hand-optimized to fit within */
- /* the sector layout of our flash chips! XXX FIXME XXX */
-
- cpu/ppc4xx/start.o (.text)
- board/esd/cpci440/init.o (.text)
- cpu/ppc4xx/kgdb.o (.text)
- cpu/ppc4xx/traps.o (.text)
- cpu/ppc4xx/interrupts.o (.text)
- cpu/ppc4xx/4xx_uart.o (.text)
- cpu/ppc4xx/cpu_init.o (.text)
- cpu/ppc4xx/speed.o (.text)
- common/dlmalloc.o (.text)
- lib_generic/crc32.o (.text)
- lib_ppc/extable.o (.text)
- lib_generic/zlib.o (.text)
-
-/* . = env_offset;*/
-/* common/environment.o(.text)*/
-
- *(.text)
- *(.fixup)
- *(.got1)
- }
- _etext = .;
- PROVIDE (etext = .);
- .rodata :
- {
- *(.rodata)
- *(.rodata1)
- *(.rodata.str1.4)
- *(.eh_frame)
- }
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
-
- /* Read-write section, merged into data segment: */
- . = (. + 0x00FF) & 0xFFFFFF00;
- _erotext = .;
- PROVIDE (erotext = .);
- .reloc :
- {
- *(.got)
- _GOT2_TABLE_ = .;
- *(.got2)
- _FIXUP_TABLE_ = .;
- *(.fixup)
- }
- __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
- __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
- .data :
- {
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
- }
- _edata = .;
- PROVIDE (edata = .);
-
- . = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
-
-
- . = .;
- __start___ex_table = .;
- __ex_table : { *(__ex_table) }
- __stop___ex_table = .;
-
- . = ALIGN(256);
- __init_begin = .;
- .text.init : { *(.text.init) }
- .data.init : { *(.data.init) }
- . = ALIGN(256);
- __init_end = .;
-
- __bss_start = .;
- .bss :
- {
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
- *(COMMON)
- }
- _end = . ;
- PROVIDE (end = .);
-}
+++ /dev/null
-/*
- * (C) Copyright 2002
- * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/************************************************************************
- * board/config_CPCI440.h - configuration for esd CPCI-440 board
- ***********************************************************************/
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*-----------------------------------------------------------------------
- * High Level Configuration Options
- *----------------------------------------------------------------------*/
-#define CONFIG_CPCI440 1 /* Board is ebony */
-#define CONFIG_440GP 1 /* Specifc GP support */
-#define CONFIG_440 1 /* ... PPC440 family */
-#define CONFIG_4xx 1 /* ... PPC4xx family */
-#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
-#undef CFG_DRAM_TEST /* Disable-takes long time! */
-#define CONFIG_SYS_CLK_FREQ 33330000 /* external frequency to pll */
-
-/*-----------------------------------------------------------------------
- * Base addresses -- Note these are effective addresses where the
- * actual resources get mapped (not physical addresses)
- *----------------------------------------------------------------------*/
-#define CFG_SDRAM_BASE 0x00000000 /* _must_ be 0 */
-#define CFG_FLASH_BASE 0xff800000 /* start of FLASH */
-#if 1
-#define CFG_MONITOR_BASE 0xfffc0000 /* start of monitor */
-#else
-#define CFG_MONITOR_BASE 0x01fc0000 /* start of monitor */
-#endif
-#define CFG_PERIPHERAL_BASE 0xe0000000 /* internal peripherals */
-#define CFG_ISRAM_BASE 0xc0000000 /* internal SRAM */
-
-#define CFG_FPGA_BASE (CFG_PERIPHERAL_BASE + 0x08300000)
-#define CFG_NVRAM_BASE_ADDR (CFG_PERIPHERAL_BASE + 0x08000000)
-
-/*-----------------------------------------------------------------------
- * Initial RAM & stack pointer (placed in internal SRAM)
- *----------------------------------------------------------------------*/
-#define CFG_INIT_RAM_ADDR CFG_ISRAM_BASE /* Initial RAM address */
-#define CFG_INIT_RAM_END 0x2000 /* End of used area in RAM */
-#define CFG_GBL_DATA_SIZE 128 /* num bytes initial data */
-
-#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
-
-#define CFG_MONITOR_LEN (192 * 1024) /* Reserve 192 kB for Mon */
-#define CFG_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc*/
-
-/*-----------------------------------------------------------------------
- * Serial Port
- *----------------------------------------------------------------------*/
-#undef CONFIG_SERIAL_SOFTWARE_FIFO
-#undef CFG_EXT_SERIAL_CLOCK /* (1843200 * 6) / * Ext clk @ 11.059 MHz */
-#define CONFIG_BAUDRATE 9600
-
-#define CFG_BAUDRATE_TABLE \
- {300, 600, 1200, 2400, 4800, 9600, 19200, 38400}
-
-/*-----------------------------------------------------------------------
- * NVRAM/RTC
- *
- * NOTE: Upper 8 bytes of NVRAM is where the RTC registers are located.
- * The DS1743 code assumes this condition (i.e. -- it assumes the base
- * address for the RTC registers is:
- *
- * CFG_NVRAM_BASE_ADDR + CFG_NVRAM_SIZE
- *
- *----------------------------------------------------------------------*/
-#define CFG_NVRAM_SIZE (0x2000 - 8) /* NVRAM size(8k)- RTC regs */
-#define CONFIG_RTC_DS174x 1 /* DS1743 RTC */
-
-/*-----------------------------------------------------------------------
- * FLASH related
- *----------------------------------------------------------------------*/
-#if 1 /* test-only */
-
-#define CFG_FLASH_CFI 1 /* Flash is CFI conformant */
-#define CFG_MAX_FLASH_SECT 128 /* max number of sectors on one chip */
-#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
-#define CFG_FLASH_INCREMENT 0 /* there is only one bank */
-#define CFG_FLASH_PROTECTION 1 /* use hardware protection */
-#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */
-#undef CFG_FLASH_BASE
-#define CFG_FLASH_BASE 0xFF800000 /* test-only...*/
-
-#else /* test-only */
-
-#define CFG_MAX_FLASH_BANKS 3 /* number of banks */
-#define CFG_MAX_FLASH_SECT 32 /* sectors per device */
-
-#undef CFG_FLASH_CHECKSUM
-#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
-#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
-
-#endif
-
-/*-----------------------------------------------------------------------
- * Environment
- *----------------------------------------------------------------------*/
-#if 0 /* test-only */
-#define CFG_ENV_IS_IN_NVRAM 1 /* Environment uses NVRAM */
-#undef CFG_ENV_IS_IN_FLASH /* ... not in flash */
-#undef CFG_ENV_IS_IN_EEPROM /* ... not in EEPROM */
-
-#define CFG_ENV_SIZE 0x1000 /* Size of Environment vars */
-#define CFG_ENV_ADDR \
- (CFG_NVRAM_BASE_ADDR+CFG_NVRAM_SIZE-CFG_ENV_SIZE)
-#else
-
-#if 0 /* test-only */
-#define CFG_ENV_IS_IN_EEPROM 1 /* use EEPROM for environment vars */
-#define CFG_ENV_OFFSET 0x010 /* environment starts at the beginning of the EEPROM */
-#define CFG_ENV_SIZE 0x800 /* 2048 bytes may be used for env vars*/
- /* total size of a CAT24WC16 is 2048 bytes */
-#else
-#define CFG_ENV_IS_IN_FLASH 1
-#define CFG_ENV_OFFSET 0x8000 /* Offset of Environment Sector */
-#define CFG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */
-#endif
-
-/*-----------------------------------------------------------------------
- * I2C EEPROM (CAT24WC16) for environment
- */
-#define CONFIG_HARD_I2C /* I2c with hardware support */
-#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
-#define CFG_I2C_SLAVE 0x7F
-
-#define CFG_I2C_EEPROM_ADDR 0x50 /* EEPROM CAT28WC08 */
-#define CFG_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */
-/* mask of address bits that overflow into the "EEPROM chip address" */
-#define CFG_I2C_EEPROM_ADDR_OVERFLOW 0x07
-#define CFG_EEPROM_PAGE_WRITE_BITS 4 /* The Catalyst CAT24WC08 has */
- /* 16 byte page write mode using*/
- /* last 4 bits of the address */
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */
-#define CFG_EEPROM_PAGE_WRITE_ENABLE
-
-#endif
-
-#undef CONFIG_BOOTARGS
-#undef CONFIG_BOOTCOMMAND
-
-#define CONFIG_BOOTDELAY 3 /* autoboot after 3 seconds */
-#define CONFIG_BAUDRATE 9600
-
-#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
-
-#define CONFIG_MII 1 /* MII PHY management */
-#define CONFIG_PHY_ADDR 1 /* PHY address */
-#define CONFIG_LXT971_NO_SLEEP 1 /* disable sleep mode in LXT971 */
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_IRQ
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_EEPROM
-
-
-#undef CONFIG_WATCHDOG /* watchdog disabled */
-
-#undef CONFIG_SPD_EEPROM /* don't use SPD EEPROM for setup */
-
-/*
- * Miscellaneous configurable options
- */
-#define CFG_LONGHELP /* undef to save memory */
-#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
-#else
-#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
-#endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS 16 /* max number of command args */
-#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
-
-#define CFG_MEMTEST_START 0x0400000 /* memtest works on */
-#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
-
-#define CFG_LOAD_ADDR 0x100000 /* default load address */
-#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */
-
-#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
-
-#if 0 /* test-only */
-#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
-#undef CONFIG_SOFT_I2C /* I2C bit-banged */
-#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
-#define CFG_I2C_SLAVE 0x7F
-#endif
-
-
-/*-----------------------------------------------------------------------
- * PCI stuff
- *-----------------------------------------------------------------------
- */
-#if 0
-#define PCI_HOST_ADAPTER 0 /* configure ar pci adapter */
-#define PCI_HOST_FORCE 1 /* configure as pci host */
-#define PCI_HOST_AUTO 2 /* detected via arbiter enable */
-
-#define CONFIG_PCI /* include pci support */
-#define CONFIG_PCI_HOST PCI_HOST_FORCE /* select pci host function */
-#define CONFIG_PCI_PNP /* do pci plug-and-play */
- /* resource configuration */
-
-#define CONFIG_PCI_SCAN_SHOW /* print pci devices @ startup */
-
-#define CONFIG_PCI_BOOTDELAY 0 /* enable pci bootdelay variable*/
-
-#define CFG_PCI_SUBSYS_VENDORID 0x0000 /* PCI Vendor ID: to-do!!! */
-#define CFG_PCI_SUBSYS_DEVICEID 0x0000 /* PCI Device ID: to-do!!! */
-#define CFG_PCI_PTM1LA 0x00000000 /* point to sdram */
-#define CFG_PCI_PTM1MS 0x80000001 /* 2GB, enable hard-wired to 1 */
-#define CFG_PCI_PTM1PCI 0x00000000 /* Host: use this pci address */
-#define CFG_PCI_PTM2LA 0x00000000 /* disabled */
-#define CFG_PCI_PTM2MS 0x00000000 /* disabled */
-#define CFG_PCI_PTM2PCI 0x04000000 /* Host: use this pci address */
-#endif
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
-
-/* Configuration Port location */
-#define CONFIG_PORT_ADDR 0xF0000500
-
-/*-----------------------------------------------------------------------
- * Definitions for Serial Presence Detect EEPROM address
- * (to get SDRAM settings)
- */
-#define SPD_EEPROM_ADDRESS 0x50
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM 0x02 /* Software reboot */
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
-#endif
-#endif /* __CONFIG_H */
projects / u-boot.git / commitdiff