Kconfig: Remove all default n/no options

default n/no doesn't need to be specified. It is default option anyway.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
[trini: Rework FSP_USE_UPD portion]
Signed-off-by: Tom Rini <trini@konsulko.com>

diff --git a/Kconfig b/Kconfig
index 35d619f3fc8ceb065aabe7725cdc98127a86fce3..931a22806e4ea54c0255319a18f2426e94dc067d 100644 (file)
--- a/Kconfig
+++ b/Kconfig
@@ -83,7 +83,6 @@ config CC_OPTIMIZE_FOR_SIZE
 
 config OPTIMIZE_INLINING
        bool "Allow compiler to uninline functions marked 'inline' in full U-Boot"
-       default n
        help
          This option determines if U-Boot forces gcc to inline the functions
          developers have marked 'inline'. Doing so takes away freedom from gcc to
@@ -93,7 +92,6 @@ config OPTIMIZE_INLINING
 config SPL_OPTIMIZE_INLINING
        bool "Allow compiler to uninline functions marked 'inline' in SPL"
        depends on SPL
-       default n
        help
          This option determines if U-Boot forces gcc to inline the functions
          developers have marked 'inline'. Doing so takes away freedom from gcc to
@@ -106,7 +104,6 @@ config ARCH_SUPPORTS_LTO
 config LTO
        bool "Enable Link Time Optimizations"
        depends on ARCH_SUPPORTS_LTO
-       default n
        help
          This option enables Link Time Optimization (LTO), a mechanism which
          allows the compiler to optimize between different compilation units.
@@ -127,7 +124,6 @@ config LTO
 config TPL_OPTIMIZE_INLINING
        bool "Allow compiler to uninline functions marked 'inline' in TPL"
        depends on TPL
-       default n
        help
          This option determines if U-Boot forces gcc to inline the functions
          developers have marked 'inline'. Doing so takes away freedom from gcc to
@@ -310,7 +306,6 @@ if EXPERT
 
 config SYS_MALLOC_DEFAULT_TO_INIT
        bool "Default malloc to init while reserving the memory for it"
-       default n
        help
          It may happen that one needs to move the dynamic allocation
          from one to another memory range, eg. when moving the malloc
@@ -440,7 +435,6 @@ config SYS_HAS_SRAM
        default y if TARGET_PIC32MZDASK
        default y if TARGET_DEVKIT8000
        default y if TARGET_TRICORDER
-       default n
        help
          Enable this to allow support for the on board SRAM.
          SRAM base address is controlled by CONFIG_SYS_SRAM_BASE.

diff --git a/api/Kconfig b/api/Kconfig
index 16731d3b4b31d15b50b4d14beea66fbc07233cc4..382aa4ad3f02cb82aa777216854cb3d9cdf78925 100644 (file)
--- a/api/Kconfig
+++ b/api/Kconfig
@@ -2,7 +2,6 @@ menu "API"
 
 config API
        bool "Enable U-Boot API"
-       default n
        help
          This option enables the U-Boot API. See api/README for more information.
 

diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig
index 6ff201fa81678fab7d0bd70eb4663073dc347520..1a7c525cdb96f0ce8a501e0d5aad13c570a625bf 100644 (file)
--- a/arch/arc/Kconfig
+++ b/arch/arc/Kconfig
@@ -104,13 +104,11 @@ endchoice
 
 config CPU_BIG_ENDIAN
        bool "Enable Big Endian Mode"
-       default n
        help
          Build kernel for Big Endian Mode of ARC CPU
 
 config SYS_ICACHE_OFF
        bool "Do not enable icache"
-       default n
        help
          Do not enable instruction cache in U-Boot.
 
@@ -123,7 +121,6 @@ config SPL_SYS_ICACHE_OFF
 
 config SYS_DCACHE_OFF
        bool "Do not enable dcache"
-       default n
        help
          Do not enable data cache in U-Boot.
 
@@ -136,14 +133,12 @@ config SPL_SYS_DCACHE_OFF
 
 menuconfig ARC_DBG
        bool "ARC debugging"
-       default n
 
 if ARC_DBG
 
 config ARC_DBG_IOC_ENABLE
        bool "Enable IO coherency unit"
        depends on CPU_ARCHS38
-       default n
        help
          Enable IO coherency unit to debug problems with caches and
          DMA peripherals.

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 3b1e25721563639b143ae3153b541f7ab285c2ce..b730d3ebd80fb41b65b8f8f7aaf31031b8968f4f 100644 (file)
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -110,7 +110,6 @@ config THUMB2_KERNEL
 
 config SYS_ICACHE_OFF
        bool "Do not enable icache"
-       default n
        help
          Do not enable instruction cache in U-Boot.
 
@@ -123,7 +122,6 @@ config SPL_SYS_ICACHE_OFF
 
 config SYS_DCACHE_OFF
        bool "Do not enable dcache"
-       default n
        help
          Do not enable data cache in U-Boot.
 
@@ -443,7 +441,6 @@ config ENABLE_ARM_SOC_BOOT0_HOOK
 
 config ARM_CORTEX_CPU_IS_UP
        bool
-       default n
 
 config USE_ARCH_MEMCPY
        bool "Use an assembly optimized implementation of memcpy"
@@ -1907,7 +1904,6 @@ config ARCH_SUPPORT_TFABOOT
 config TFABOOT
        bool "Support for booting from TF-A"
        depends on ARCH_SUPPORT_TFABOOT
-       default n
        help
          Some platforms support the setup of secure registers (for instance
          for CPU errata handling) or provide secure services like PSCI.

diff --git a/arch/arm/cpu/armv8/Kconfig b/arch/arm/cpu/armv8/Kconfig
index b7a10a8e34e6120f09b2c77c3f55471e0eeb09af..0a3fdfa4716e348fa2de14ff4c76e3afa055ea80 100644 (file)
--- a/arch/arm/cpu/armv8/Kconfig
+++ b/arch/arm/cpu/armv8/Kconfig
@@ -3,7 +3,6 @@ if ARM64
 config ARMV8_SPL_EXCEPTION_VECTORS
        bool "Install crash dump exception vectors"
        depends on SPL
-       default n
        help
          The default exception vector table is only used for the crash
          dump, but still takes quite a lot of space in the image size.
@@ -128,7 +127,6 @@ config PSCI_RESET
 
 config ARMV8_PSCI
        bool "Enable PSCI support" if EXPERT
-       default n
        help
          PSCI is Power State Coordination Interface defined by ARM.
          The PSCI in U-boot provides a general framework and each platform
@@ -156,7 +154,6 @@ config ARMV8_PSCI_CPUS_PER_CLUSTER
 
 config ARMV8_EA_EL3_FIRST
        bool "External aborts and SError interrupt exception are taken in EL3"
-       default n
        help
          Exception handling at all exception levels for External Abort and
          SError interrupt exception are taken in EL3.

diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
index b10b56d2d30a3360bdf0512f8676bac9a8bc9893..1e166c73e40a02b216fbb65ac4114cf1f40f4ee0 100644 (file)
--- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
+++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
@@ -453,7 +453,6 @@ config QSPI_AHB_INIT
 
 config FSPI_AHB_EN_4BYTE
        bool "Enable 4-byte Fast Read command for AHB mode"
-       default n
        help
          The default setting for FlexSPI AHB bus just supports 3-byte addressing.
          But some FlexSPI flash sizes are up to 64MBytes.

diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index c90505e5edcb6000363a854fd2753dbf510cbcc7..4448ca1592e21c08511695bf22094fae6b6e53c7 100644 (file)
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -298,7 +298,6 @@ endchoice
 
 config ATMEL_SFR
        bool
-       default n
 
 config SYS_SOC
        default "at91"

diff --git a/arch/arm/mach-imx/mx6/Kconfig b/arch/arm/mach-imx/mx6/Kconfig
index 789a50d4e92c17595f94b4a4f1990876bf535d63..cb85ad2ae21f1f9af468f3756876a28746e95970 100644 (file)
--- a/arch/arm/mach-imx/mx6/Kconfig
+++ b/arch/arm/mach-imx/mx6/Kconfig
@@ -102,7 +102,6 @@ config MX6_OCRAM_256KB
 config MX6_DDRCAL
        bool "Include dynamic DDR calibration routines"
        depends on SPL
-       default n
        help
          Say "Y" if your board uses dynamic (per-boot) DDR calibration.
          If unsure, say N.

diff --git a/arch/arm/mach-mediatek/Kconfig b/arch/arm/mach-mediatek/Kconfig
index e067604d9b394a711498cb18314d79eef168620c..134b6b17c2d3b68a38be080f05f0595fcaf84e18 100644 (file)
--- a/arch/arm/mach-mediatek/Kconfig
+++ b/arch/arm/mach-mediatek/Kconfig
@@ -8,7 +8,6 @@ config SYS_VENDOR
 
 config MT8512
        bool "MediaTek MT8512 SoC"
-       default n
 
 choice
        prompt "MediaTek board select"

diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig
index 944bbee7634d9d5027116d2f2029b02dc8a1f714..c6a4b07a9ed170d7069bb5d9c507e65e29045bb5 100644 (file)
--- a/arch/arm/mach-mvebu/Kconfig
+++ b/arch/arm/mach-mvebu/Kconfig
@@ -2,7 +2,6 @@ if ARCH_MVEBU
 
 config HAVE_MVEBU_EFUSE
        bool
-       default n
 
 config ARMADA_32BIT
        bool
@@ -311,14 +310,12 @@ endchoice
 
 config MVEBU_EFUSE
        bool "Enable eFuse support"
-       default n
        depends on HAVE_MVEBU_EFUSE
        help
          Enable support for reading and writing eFuses on mvebu SoCs.
 
 config MVEBU_EFUSE_FAKE
        bool "Fake eFuse access (dry run)"
-       default n
        depends on MVEBU_EFUSE
        help
          This enables a "dry run" mode where eFuses are not really programmed.

diff --git a/arch/arm/mach-rmobile/Kconfig.32 b/arch/arm/mach-rmobile/Kconfig.32
index d5e437f0d2e2b4e67df9f6f9282c29a5b75d1ce8..ea98bb00f3ba6673f98428836ad137cf997c47e4 100644 (file)
--- a/arch/arm/mach-rmobile/Kconfig.32
+++ b/arch/arm/mach-rmobile/Kconfig.32
@@ -133,7 +133,6 @@ config SYS_SOC
 config RMOBILE_EXTRAM_BOOT
        bool "Enable boot from RAM"
        depends on TARGET_ALT || TARGET_BLANCHE || TARGET_KOELSCH || TARGET_LAGER || TARGET_PORTER || TARGET_SILK || TARGET_STOUT
-       default n
 
 choice
        prompt "Qos setting primary"

diff --git a/arch/arm/mach-stm32mp/Kconfig b/arch/arm/mach-stm32mp/Kconfig
index 5d7eca649a87313e605fa3546f0cb4b93f35bba4..4a57014a21164225c0129867d0480a41b27f3e5e 100644 (file)
--- a/arch/arm/mach-stm32mp/Kconfig
+++ b/arch/arm/mach-stm32mp/Kconfig
@@ -190,7 +190,6 @@ config STM32_ECDSA_VERIFY
 
 config CMD_STM32KEY
        bool "command stm32key to fuse public key hash"
-       default n
        help
                fuse public key hash in corresponding fuse used to authenticate
                binary.

diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
index 79c669a481351e2293cfae29f3b00a7551378774..1d4a4fdd0c5963cfc8feaa79db8a01f4744e9c56 100644 (file)
--- a/arch/arm/mach-sunxi/Kconfig
+++ b/arch/arm/mach-sunxi/Kconfig
@@ -629,7 +629,6 @@ config SYS_SOC
 
 config UART0_PORT_F
        bool "UART0 on MicroSD breakout board"
-       default n
        ---help---
        Repurpose the SD card slot for getting access to the UART0 serial
        console. Primarily useful only for low level u-boot debugging on
@@ -640,7 +639,6 @@ config UART0_PORT_F
 
 config OLD_SUNXI_KERNEL_COMPAT
        bool "Enable workarounds for booting old kernels"
-       default n
        ---help---
        Set this to enable various workarounds for old kernels, this results in
        sub-optimal settings for newer kernels, only enable if needed.
@@ -771,14 +769,12 @@ config I2C0_ENABLE
 
 config I2C1_ENABLE
        bool "Enable I2C/TWI controller 1"
-       default n
        select CMD_I2C
        ---help---
        See I2C0_ENABLE help text.
 
 config I2C2_ENABLE
        bool "Enable I2C/TWI controller 2"
-       default n
        select CMD_I2C
        ---help---
        See I2C0_ENABLE help text.
@@ -786,7 +782,6 @@ config I2C2_ENABLE
 if MACH_SUN6I || MACH_SUN7I
 config I2C3_ENABLE
        bool "Enable I2C/TWI controller 3"
-       default n
        select CMD_I2C
        ---help---
        See I2C0_ENABLE help text.
@@ -805,7 +800,6 @@ endif
 if MACH_SUN7I
 config I2C4_ENABLE
        bool "Enable I2C/TWI controller 4"
-       default n
        select CMD_I2C
        ---help---
        See I2C0_ENABLE help text.
@@ -813,7 +807,6 @@ endif
 
 config AXP_GPIO
        bool "Enable support for gpio-s on axp PMICs"
-       default n
        ---help---
        Say Y here to enable support for the gpio pins of the axp PMIC ICs.
 
@@ -845,14 +838,12 @@ config VIDEO_HDMI
 config VIDEO_VGA
        bool "VGA output support"
        depends on VIDEO_SUNXI && (MACH_SUN4I || MACH_SUN7I)
-       default n
        ---help---
        Say Y here to add support for outputting video over VGA.
 
 config VIDEO_VGA_VIA_LCD
        bool "VGA via LCD controller support"
        depends on VIDEO_SUNXI && (MACH_SUN5I || MACH_SUN6I || MACH_SUN8I)
-       default n
        ---help---
        Say Y here to add support for external DACs connected to the parallel
        LCD interface driving a VGA connector, such as found on the
@@ -861,7 +852,6 @@ config VIDEO_VGA_VIA_LCD
 config VIDEO_VGA_VIA_LCD_FORCE_SYNC_ACTIVE_HIGH
        bool "Force sync active high for VGA via LCD controller support"
        depends on VIDEO_VGA_VIA_LCD
-       default n
        ---help---
        Say Y here if you've a board which uses opendrain drivers for the vga
        hsync and vsync signals. Opendrain drivers cannot generate steep enough
@@ -879,7 +869,6 @@ config VIDEO_VGA_EXTERNAL_DAC_EN
 config VIDEO_COMPOSITE
        bool "Composite video output support"
        depends on VIDEO_SUNXI && (MACH_SUN4I || MACH_SUN5I || MACH_SUN7I)
-       default n
        ---help---
        Say Y here to add support for outputting composite video.
 
@@ -943,7 +932,6 @@ config VIDEO_LCD_BL_PWM_ACTIVE_LOW
 config VIDEO_LCD_PANEL_I2C
        bool "LCD panel needs to be configured via i2c"
        depends on VIDEO_SUNXI
-       default n
        select CMD_I2C
        ---help---
        Say y here if the LCD panel needs to be configured via i2c. This
@@ -976,7 +964,6 @@ config VIDEO_LCD_IF_LVDS
 
 config SUNXI_DE2
        bool
-       default n
 
 config VIDEO_DE2
        bool "Display Engine 2 video driver"

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index fa221f1d042cd6a60667be1656a7646898f53456..ebfa8e668cc34ea5bf0778af269bb19e38ea4cd7 100644 (file)
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -346,7 +346,6 @@ config MIPS_RELOCATION_TABLE_SIZE
 
 config RESTORE_EXCEPTION_VECTOR_BASE
        bool "Restore exception vector base before booting linux kernel"
-       default n
        help
          In U-Boot the exception vector base will be moved to top of memory,
          to be used to display register dump when exception occurs.
@@ -361,7 +360,6 @@ config RESTORE_EXCEPTION_VECTOR_BASE
 config OVERRIDE_EXCEPTION_VECTOR_BASE
        bool "Override the exception vector base to be restored"
        depends on RESTORE_EXCEPTION_VECTOR_BASE
-       default n
        help
          Enable this option if you want to use a different exception vector
          base rather than the previously saved one.
@@ -376,7 +374,6 @@ config NEW_EXCEPTION_VECTOR_BASE
 
 config INIT_STACK_WITHOUT_MALLOC_F
        bool "Do not reserve malloc space on initial stack"
-       default n
        help
          Enable this option if you don't want to reserve malloc space on
          initial stack. This is useful if the initial stack can't hold large
@@ -385,7 +382,6 @@ config INIT_STACK_WITHOUT_MALLOC_F
 
 config SPL_INIT_STACK_WITHOUT_MALLOC_F
        bool "Do not reserve malloc space on initial stack in SPL"
-       default n
        help
          Enable this option if you don't want to reserve malloc space on
          initial stack. This is useful if the initial stack can't hold large
@@ -394,7 +390,6 @@ config SPL_INIT_STACK_WITHOUT_MALLOC_F
 
 config SPL_LOADER_SUPPORT
        bool
-       default n
        help
          Enable this option if you want to use SPL loaders without DM enabled.
 
@@ -422,7 +417,6 @@ config MIPS_BOOT_ENV_LEGACY
 
 config MIPS_BOOT_FDT
        bool "Hand over a flattened device tree to Linux kernel"
-       default n
        help
          Enable this option if you want U-Boot to hand over a flattened
          device tree to the kernel. According to UHI register $a0 will be set
@@ -501,7 +495,6 @@ config SYS_MIPS_CACHE_INIT_RAM_LOAD
 
 config MIPS_INIT_STACK_IN_SRAM
        bool
-       default n
        help
          Select this if the initial stack frame could be setup in SRAM.
          Normally the initial stack frame is set up in DRAM which is often
@@ -512,7 +505,6 @@ config MIPS_INIT_STACK_IN_SRAM
 
 config MIPS_SRAM_INIT
        bool
-       default n
        depends on MIPS_INIT_STACK_IN_SRAM
        help
          Select this if the SRAM for initial stack needs to be initialized
@@ -584,7 +576,6 @@ config MIPS_CM
 
 config MIPS_INSERT_BOOT_CONFIG
        bool
-       default n
        help
          Enable this to insert some board-specific boot configuration in
          the U-Boot binary at offset 0x10.

diff --git a/arch/mips/mach-mtmips/mt7628/Kconfig b/arch/mips/mach-mtmips/mt7628/Kconfig
index e3f56e782ebbb4c8119c929791ffc6ed2b7db52c..b25b20f92dddf4ec173cadcf03a742668bb867ba 100644 (file)
--- a/arch/mips/mach-mtmips/mt7628/Kconfig
+++ b/arch/mips/mach-mtmips/mt7628/Kconfig
@@ -40,7 +40,6 @@ endchoice
 config SPL_UART2_SPIS_PINMUX
        bool "Use alternative pinmux for UART2 in SPL stage"
        depends on SPL_SERIAL_SUPPORT
-       default n
        help
          Select this if the UART2 of your board is connected to GPIO 16/17
          (shared with SPIS) rather than the usual GPIO 20/21.

diff --git a/arch/nds32/Kconfig b/arch/nds32/Kconfig
index b6f16bf1244662c91ad9bdac861c684600b955e0..435333720c734afa2008fb5671a702c237392898 100644 (file)
--- a/arch/nds32/Kconfig
+++ b/arch/nds32/Kconfig
@@ -18,7 +18,6 @@ endchoice
 
 config SYS_ICACHE_OFF
        bool "Do not enable icache"
-       default n
        help
          Do not enable instruction cache in U-Boot.
 
@@ -31,7 +30,6 @@ config SPL_SYS_ICACHE_OFF
 
 config SYS_DCACHE_OFF
        bool "Do not enable dcache"
-       default n
        help
          Do not enable data cache in U-Boot.
 

diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
index 691ed113824557d192ae093dd1e20149362c37a2..519507d57018919b043bd0b9caf575691d8d0074 100644 (file)
--- a/arch/riscv/Kconfig
+++ b/arch/riscv/Kconfig
@@ -35,7 +35,6 @@ endchoice
 
 config SYS_ICACHE_OFF
        bool "Do not enable icache"
-       default n
        help
          Do not enable instruction cache in U-Boot.
 
@@ -48,7 +47,6 @@ config SPL_SYS_ICACHE_OFF
 
 config SYS_DCACHE_OFF
        bool "Do not enable dcache"
-       default n
        help
          Do not enable data cache in U-Boot.
 

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 300b48505e44942bef531b0cad653fdc35815733..b8d8ee30838bb719419922b7bff303e8a8a45396 100644 (file)
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -146,14 +146,12 @@ config HPET_ADDRESS
 
 config SMM_TSEG
        bool
-       default n
 
 config SMM_TSEG_SIZE
        hex
 
 config X86_RESET_VECTOR
        bool
-       default n
        select BINMAN
 
 # The following options control where the 16-bit and 32-bit init lies
@@ -490,7 +488,7 @@ config FSP_SYS_MALLOC_F_LEN
 config FSP_USE_UPD
        bool
        depends on FSP_VERSION1
-       default y
+       default y if !NORTHBRIDGE_INTEL_IVYBRIDGE
        help
          Most FSPs use UPD data region for some FSP customization. But there
          are still some FSPs that might not even have UPD. For such FSPs,
@@ -536,7 +534,6 @@ config HAVE_MRC
 config CACHE_MRC_BIN
        bool
        depends on HAVE_MRC
-       default n
        help
          Enable caching for the memory reference code binary. This uses an
          MTRR (memory type range register) to turn on caching for the section
@@ -605,7 +602,6 @@ config HAVE_MICROCODE
 
 config SMP
        bool "Enable Symmetric Multiprocessing"
-       default n
        help
          Enable use of more than one CPU in U-Boot and the Operating System
          when loaded. Each CPU will be started up and information can be
@@ -745,7 +741,6 @@ menu "System tables"
 
 config GENERATE_PIRQ_TABLE
        bool "Generate a PIRQ table"
-       default n
        help
          Generate a PIRQ routing table for this board. The PIRQ routing table
          is generated by U-Boot in the system memory from 0xf0000 to 0xfffff
@@ -769,7 +764,6 @@ config GENERATE_SFI_TABLE
 
 config GENERATE_MP_TABLE
        bool "Generate an MP (Multi-Processor) table"
-       default n
        help
          Generate an MP (Multi-Processor) table for this board. The MP table
          provides a way for the operating system to support for symmetric
@@ -778,7 +772,6 @@ config GENERATE_MP_TABLE
 
 config GENERATE_ACPI_TABLE
        bool "Generate an ACPI (Advanced Configuration and Power Interface) table"
-       default n
        select QFW if QEMU
        help
          The Advanced Configuration and Power Interface (ACPI) specification

diff --git a/arch/x86/cpu/ivybridge/Kconfig b/arch/x86/cpu/ivybridge/Kconfig
index 2f423937864230cc866fa8cdf593262eec247bb1..be3ef5e5d8f8a8d5d9c439decc0d14c63e6261fa 100644 (file)
--- a/arch/x86/cpu/ivybridge/Kconfig
+++ b/arch/x86/cpu/ivybridge/Kconfig
@@ -45,7 +45,6 @@ config SMM_TSEG_SIZE
 
 config ENABLE_VMX
        bool "Enable VMX for virtualization"
-       default n
        help
          Virtual Machine Extensions are provided in many x86 CPUs. These
          provide various facilities for allowing a host OS to provide an
@@ -64,10 +63,6 @@ config FSP_ADDR
        hex
        default 0xfff80000
 
-config FSP_USE_UPD
-       bool
-       default n
-
 config FSP_BROKEN_HOB
        bool
        default y

diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig
index 6de31e8c1e05d0e94bb099a8bd74d5102bf5dc3d..35e5b89dda047fcd5e059ba65c1ae36cff4a84fe 100644 (file)
--- a/arch/xtensa/Kconfig
+++ b/arch/xtensa/Kconfig
@@ -18,7 +18,6 @@ endchoice
 
 config SYS_ICACHE_OFF
        bool "Do not enable icache"
-       default n
        help
          Do not enable instruction cache in U-Boot.
 
@@ -31,7 +30,6 @@ config SPL_SYS_ICACHE_OFF
 
 config SYS_DCACHE_OFF
        bool "Do not enable dcache"
-       default n
        help
          Do not enable data cache in U-Boot.
 

diff --git a/board/beacon/imx8mn/Kconfig b/board/beacon/imx8mn/Kconfig
index dceb3de65472b570a5798fbbb016a0bc4d48146a..65d2923918d6011c0e10c6d808ff94d0981ac23f 100644 (file)
--- a/board/beacon/imx8mn/Kconfig
+++ b/board/beacon/imx8mn/Kconfig
@@ -11,11 +11,9 @@ config SYS_CONFIG_NAME
 
 config IMX8MN_FORCE_NOM_SOC
        bool "Force to use nominal mode for SOC and ARM"
-       default n
 
 config IMX8MN_BEACON_2GB_LPDDR
        bool "Enable 2GB LPDDR"
-       default n
 
 config IMX_CONFIG
        default "arch/arm/mach-imx/imx8m/imximage-8mn-lpddr4.cfg"

diff --git a/board/congatec/common/Kconfig b/board/congatec/common/Kconfig
index 5c205bd83043a2c42b1e9d0fa5e01d2480518ebd..d4a238de99bc03b56eeb1850a15b6498838a6020 100644 (file)
--- a/board/congatec/common/Kconfig
+++ b/board/congatec/common/Kconfig
@@ -28,7 +28,6 @@ endif
 config VOL_MONITOR_LTC3882_READ
        depends on VID
        bool "Enable the LTC3882 voltage monitor read"
-       default n
        help
         This option enables LTC3882 voltage monitor read
         functionality. It is used by common VID driver.
@@ -36,13 +35,11 @@ config VOL_MONITOR_LTC3882_READ
 config VOL_MONITOR_LTC3882_SET
        depends on VID
        bool "Enable the LTC3882 voltage monitor set"
-       default n
        help
         This option enables LTC3882 voltage monitor set
         functionality. It is used by common VID driver.
 
 config USB_TCPC
        bool "USB Typec port controller simple driver"
-       default n
        help
          Enable USB type-c port controller (TCPC) driver

diff --git a/board/freescale/common/Kconfig b/board/freescale/common/Kconfig
index ab9c14ae8858ea45a70139391a3424ad421cd6ce..1e3bb42b7e142cad2c095e4e98f4f88e288c9bb2 100644 (file)
--- a/board/freescale/common/Kconfig
+++ b/board/freescale/common/Kconfig
@@ -23,7 +23,6 @@ config CMD_ESBC_VALIDATE
 
 config FSL_USE_PCA9547_MUX
        bool "Enable PCA9547 I2C Mux on Freescale boards"
-       default n
        help
         This option enables the PCA9547 I2C mux on Freescale boards.
 

diff --git a/board/freescale/imx8mn_evk/Kconfig b/board/freescale/imx8mn_evk/Kconfig
index eb37630718d2c604841590f5ea0d0c1e977fb785..0adf87bd42a115079c182fc482a845ba7d895c46 100644 (file)
--- a/board/freescale/imx8mn_evk/Kconfig
+++ b/board/freescale/imx8mn_evk/Kconfig
@@ -11,7 +11,6 @@ config SYS_CONFIG_NAME
 
 config IMX8MN_LOW_DRIVE_MODE
        bool "Enable the low drive mode of iMX8MN on EVK board"
-       default n
 
 config IMX_CONFIG
        default "board/freescale/imx8mn_evk/imximage-8mn-ddr4.cfg"

diff --git a/board/freescale/ls1028a/Kconfig b/board/freescale/ls1028a/Kconfig
index ca22c922035470f99708f2cce128b05c55270e3e..40939816ad89a7051196e73ef09d39afd46b5a03 100644 (file)
--- a/board/freescale/ls1028a/Kconfig
+++ b/board/freescale/ls1028a/Kconfig
@@ -14,7 +14,6 @@ config SYS_CONFIG_NAME
 
 config EMMC_BOOT
        bool "Support for booting from EMMC"
-       default n
 
 config SYS_TEXT_BASE
        default 0x96000000 if SD_BOOT || EMMC_BOOT
@@ -53,7 +52,6 @@ config SYS_CONFIG_NAME
 
 config EMMC_BOOT
        bool "Support for booting from EMMC"
-       default n
 
 config SYS_TEXT_BASE
        default 0x96000000 if SD_BOOT || EMMC_BOOT

diff --git a/board/freescale/ls1043ardb/Kconfig b/board/freescale/ls1043ardb/Kconfig
index 3d9e295c4e71273b02b2b7d4ee7977bf613affc9..778b8d8d5a5a1048d175df4e3df968a5d2d9a53c 100644 (file)
--- a/board/freescale/ls1043ardb/Kconfig
+++ b/board/freescale/ls1043ardb/Kconfig
@@ -16,7 +16,6 @@ config SYS_CONFIG_NAME
 config SYS_HAS_ARMV8_SECURE_BASE
        bool "Enable secure address for PSCI image"
        depends on ARMV8_PSCI
-       default n
        help
          PSCI image can be re-located to secure RAM.
          If enabled, please also define the value for ARMV8_SECURE_BASE,

diff --git a/board/freescale/t208xrdb/Kconfig b/board/freescale/t208xrdb/Kconfig
index 8249c5df967a207af031595bae7af2213ee7336a..d4c061a5eabc48a27c216be4538be8d5b7a19fe2 100644 (file)
--- a/board/freescale/t208xrdb/Kconfig
+++ b/board/freescale/t208xrdb/Kconfig
@@ -11,7 +11,6 @@ config SYS_CONFIG_NAME
 
 config T2080RDB_REV_D
        bool "Support for T2080RDB revisions D and up"
-       default n
 
 source "board/freescale/common/Kconfig"
 

diff --git a/board/keymile/km_arm/Kconfig b/board/keymile/km_arm/Kconfig
index 6f55cfab864ebb0adca3c54339b1d43a3b8381a6..c52b365b17574e462538b76b099b98e3f46a4a4e 100644 (file)
--- a/board/keymile/km_arm/Kconfig
+++ b/board/keymile/km_arm/Kconfig
@@ -3,37 +3,31 @@ menu "KM ARM Options"
 
 config KM_FPGA_CONFIG
        bool "FPGA Configuration"
-       default n
        help
          Include capability to change FPGA configuration.
 
 config KM_FPGA_FORCE_CONFIG
        bool "FPGA reconfiguration"
-       default n
        help
          If yes we force to reconfigure the FPGA always
 
 config KM_FPGA_NO_RESET
        bool "FPGA skip reset"
-       default n
        help
          If yes we skip triggering a reset of the FPGA
 
 config KM_ENV_IS_IN_SPI_NOR
        bool "Environment in SPI NOR"
-       default n
        help
          Put the U-Boot environment in the SPI NOR flash.
 
 config KM_PIGGY4_88E6061
        bool "Piggy via Switch 88E6061"
-       default n
        help
          The Piggy4 board is connected via a Marvell 88E6061 switch.
 
 config KM_PIGGY4_88E6352
        bool "Piggy via Switch 88E6352"
-       default n
        help
          The Piggy4 board is connected via a Marvell 88E6352 switch.
 

diff --git a/board/toradex/apalis_imx6/Kconfig b/board/toradex/apalis_imx6/Kconfig
index 14f8c10c64cf932ffab05da47ddf55314e664f97..c6ff387351c4b9f03edf909cbeb6b8b614661db3 100644 (file)
--- a/board/toradex/apalis_imx6/Kconfig
+++ b/board/toradex/apalis_imx6/Kconfig
@@ -48,7 +48,6 @@ config TDX_APALIS_IMX6_V1_0
            This option configures DCE mode unconditionally. Whithout this
            option the config block stating V1.0 HW selects DCE mode,
            otherwise the UARTs are configuered in DTE mode.
-       default n
 
 source "board/toradex/common/Kconfig"
 

diff --git a/cmd/Kconfig b/cmd/Kconfig
index 41aba385ca9ec1cad77ee28c6df5540b6c6b3713..d8fc5a171bbc8c202d9cc7b9d5e9b7f02b10566f 100644 (file)
--- a/cmd/Kconfig
+++ b/cmd/Kconfig
@@ -471,7 +471,6 @@ config CMD_SAVEENV
 
 config CMD_ERASEENV
        bool "eraseenv"
-       default n
        depends on CMD_SAVEENV
        help
          Erase environment variables from the compiled-in persistent
@@ -652,14 +651,12 @@ config LOOPW
 
 config CMD_MD5SUM
        bool "md5sum"
-       default n
        select MD5
        help
          Compute MD5 checksum.
 
 config MD5SUM_VERIFY
        bool "md5sum -v"
-       default n
        depends on CMD_MD5SUM
        help
          Add -v option to verify data against an MD5 checksum.
@@ -1119,7 +1116,6 @@ if CMD_MMC
 config CMD_BKOPS_ENABLE
        bool "mmc bkops enable"
        depends on CMD_MMC
-       default n
        help
          Enable command for setting manual background operations handshake
          on a eMMC device. The feature is optionally available on eMMC devices
@@ -1447,7 +1443,6 @@ config CMD_SETEXPR
 
 config CMD_SETEXPR_FMT
        bool "setexpr_fmt"
-       default n
        depends on CMD_SETEXPR
        help
          Evaluate format string expression and store result in an environment
@@ -1459,7 +1454,6 @@ menu "Android support commands"
 
 config CMD_AB_SELECT
        bool "ab_select"
-       default n
        depends on ANDROID_AB
        help
          On Android devices with more than one boot slot (multiple copies of
@@ -1764,7 +1758,6 @@ config CMD_EFIDEBUG
        bool "efidebug - display/configure UEFI environment"
        depends on EFI_LOADER
        select EFI_DEVICE_PATH_TO_TEXT
-       default n
        help
          Enable the 'efidebug' command which provides a subset of UEFI
          shell utility with simplified functionality. It will be useful
@@ -2367,7 +2360,6 @@ config CMD_TRACE
 config CMD_AVB
        bool "avb - Android Verified Boot 2.0 operations"
        depends on AVB_VERIFY
-       default n
        help
          Enables a "avb" command to perform verification of partitions using
          Android Verified Boot 2.0 functionality. It includes such subcommands:
@@ -2407,7 +2399,6 @@ config CMD_UBI
 config CMD_UBI_RENAME
        bool "Enable rename"
        depends on CMD_UBI
-       default n
        help
          Enable a "ubi" command to rename ubi volume:
           ubi rename <oldname> <newname>

diff --git a/cmd/mvebu/Kconfig b/cmd/mvebu/Kconfig
index 7c42c75afbe2d9b6519f88d3a4d96ee6a94d65ac..4afe0bf32ddb5d77b2e52b93a1c9f4daeb34d500 100644 (file)
--- a/cmd/mvebu/Kconfig
+++ b/cmd/mvebu/Kconfig
@@ -3,7 +3,6 @@ depends on ARCH_MVEBU
 
 config CMD_MVEBU_BUBT
        bool "bubt"
-       default n
        help
          bubt - Burn a u-boot image to flash
          For details about bubt command please see the documentation

diff --git a/common/Kconfig b/common/Kconfig
index 4c774a4ffc590b8f548309d55a14731291938a9b..5c1151bf544ee1e56f729957a40504e72418e5c9 100644 (file)
--- a/common/Kconfig
+++ b/common/Kconfig
@@ -634,7 +634,6 @@ config TPL_HASH
 
 config STACKPROTECTOR
        bool "Stack Protector buffer overflow detection"
-       default n
        help
          Enable stack smash detection through compiler's stack-protector
          canary logic
@@ -642,12 +641,10 @@ config STACKPROTECTOR
 config SPL_STACKPROTECTOR
        bool "Stack Protector buffer overflow detection for SPL"
        depends on STACKPROTECTOR && SPL
-       default n
 
 config TPL_STACKPROTECTOR
        bool "Stack Protector buffer overflow detection for TPL"
        depends on STACKPROTECTOR && TPL
-       default n
 
 endmenu
 
@@ -655,7 +652,6 @@ menu "Update support"
 
 config UPDATE_COMMON
        bool
-       default n
        select DFU_WRITE_ALT
 
 config UPDATE_TFTP
@@ -687,7 +683,6 @@ config UPDATE_FIT
 
 config ANDROID_AB
        bool "Android A/B updates"
-       default n
        help
          If enabled, adds support for the new Android A/B update model. This
          allows the bootloader to select which slot to boot from based on the

diff --git a/common/Kconfig.boot b/common/Kconfig.boot
index 3e18a371fe9f6916a05c5ddcebc7e523d0c9e208..e2780bdd8ebf52f5753e199b56e0ccd768f2aca2 100644 (file)
--- a/common/Kconfig.boot
+++ b/common/Kconfig.boot
@@ -46,7 +46,6 @@ config FIT_SHA256
 
 config FIT_SHA384
        bool "Support SHA384 checksum of FIT image contents"
-       default n
        select SHA384
        help
          Enable this to support SHA384 checksum of FIT image contents. A
@@ -56,7 +55,6 @@ config FIT_SHA384
 
 config FIT_SHA512
        bool "Support SHA512 checksum of FIT image contents"
-       default n
        select SHA512
        help
          Enable this to support SHA512 checksum of FIT image contents. A
@@ -106,7 +104,6 @@ config FIT_SIGNATURE_MAX_SIZE
 config FIT_RSASSA_PSS
        bool "Support rsassa-pss signature scheme of FIT image contents"
        depends on FIT_SIGNATURE
-       default n
        help
          Enable this to support the pss padding algorithm as described
          in the rfc8017 (https://tools.ietf.org/html/rfc8017).
@@ -727,7 +724,6 @@ config NOR_BOOT
 
 config NAND_BOOT
        bool "Support for booting from NAND flash"
-       default n
        imply MTD_RAW_NAND
        help
          Enabling this will make a U-Boot binary that is capable of being
@@ -736,7 +732,6 @@ config NAND_BOOT
 
 config ONENAND_BOOT
        bool "Support for booting from ONENAND"
-       default n
        imply MTD_RAW_NAND
        help
          Enabling this will make a U-Boot binary that is capable of being
@@ -745,7 +740,6 @@ config ONENAND_BOOT
 
 config QSPI_BOOT
        bool "Support for booting from QSPI flash"
-       default n
        help
          Enabling this will make a U-Boot binary that is capable of being
          booted via QSPI flash. This is not a must, some SoCs need this,
@@ -753,7 +747,6 @@ config QSPI_BOOT
 
 config SATA_BOOT
        bool "Support for booting from SATA"
-       default n
        help
          Enabling this will make a U-Boot binary that is capable of being
          booted via SATA. This is not a must, some SoCs need this,
@@ -761,7 +754,6 @@ config SATA_BOOT
 
 config SD_BOOT
        bool "Support for booting from SD/EMMC"
-       default n
        help
          Enabling this will make a U-Boot binary that is capable of being
          booted via SD/EMMC. This is not a must, some SoCs need this,
@@ -769,7 +761,6 @@ config SD_BOOT
 
 config SPI_BOOT
        bool "Support for booting from SPI flash"
-       default n
        help
          Enabling this will make a U-Boot binary that is capable of being
          booted via SPI flash. This is not a must, some SoCs need this,
@@ -803,7 +794,6 @@ config BOOTDELAY
 
 config AUTOBOOT_KEYED
        bool "Stop autobooting via specific input key / string"
-       default n
        help
          This option enables stopping (aborting) of the automatic
          boot feature only by issuing a specific input key or
@@ -890,7 +880,6 @@ config AUTOBOOT_STOP_STR
 config AUTOBOOT_KEYED_CTRLC
        bool "Enable Ctrl-C autoboot interruption"
        depends on AUTOBOOT_KEYED && !AUTOBOOT_ENCRYPTION
-       default n
        help
          This option allows for the boot sequence to be interrupted
          by ctrl-c, in addition to the "bootdelaykey" and "bootstopkey".

diff --git a/common/spl/Kconfig b/common/spl/Kconfig
index c155a3b5fcca3b101ad26ce0e729fe247d031a29..089774e83f46bbf4ce517cf350ced2eac1258a7f 100644 (file)
--- a/common/spl/Kconfig
+++ b/common/spl/Kconfig
@@ -722,7 +722,6 @@ config SYS_MMCSD_FS_BOOT_PARTITION
 config SPL_MMC_TINY
        bool "Tiny MMC framework in SPL"
        depends on SPL_MMC_SUPPORT
-       default n
        help
          Enable MMC framework tinification support. This option is useful if
          if your SPL is extremely size constrained. Heed the warning, enable
@@ -739,7 +738,6 @@ config SPL_MMC_TINY
 config SPL_MMC_WRITE
        bool "MMC/SD/SDIO card support for write operations in SPL"
        depends on SPL_MMC_SUPPORT
-       default n
        help
          Enable write access to MMC and SD Cards in SPL
 
@@ -912,7 +910,6 @@ config SPL_UBI_LOAD_ARGS_ID
 
 config UBI_SPL_SILENCE_MSG
        bool "silence UBI SPL messages"
-       default n
        help
          Disable messages from UBI SPL. This leaves warnings
          and errors enabled.
@@ -975,7 +972,6 @@ config SPL_ONENAND_SUPPORT
 config SPL_OS_BOOT
        bool "Activate Falcon Mode"
        depends on !TI_SECURE_DEVICE
-       default n
        help
          Enable booting directly to an OS from SPL.
          for more info read doc/README.falcon
@@ -1422,7 +1418,6 @@ config TPL_LDSCRIPT
 
 config TPL_NEEDS_SEPARATE_TEXT_BASE
        bool "TPL needs a separate text-base"
-       default n
        depends on TPL
        help
          Enable, if the TPL stage should not inherit its text-base
@@ -1431,7 +1426,6 @@ config TPL_NEEDS_SEPARATE_TEXT_BASE
 
 config TPL_NEEDS_SEPARATE_STACK
        bool "TPL needs a separate initial stack-pointer"
-       default n
        depends on TPL
        help
          Enable, if the TPL stage should not inherit its initial
@@ -1638,7 +1632,6 @@ endif # TPL
 config SPL_AT91_MCK_BYPASS
        bool "Use external clock signal as a source of main clock for AT91 platforms"
        depends on ARCH_AT91
-       default n
        help
          Use external 8 to 24 Mhz clock signal as source of main clock instead
          of an external crystal oscillator.

diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig
index 4023332dd98c8ed281256d6a730faa7d41e8785a..56a4eec05ac7863dfdc06e7107716ee6d3b08d68 100644 (file)
--- a/drivers/block/Kconfig
+++ b/drivers/block/Kconfig
@@ -52,14 +52,12 @@ config BLOCK_CACHE
 config SPL_BLOCK_CACHE
        bool "Use block device cache in SPL"
        depends on SPL_BLK
-       default n
        help
          This option enables the disk-block cache in SPL
 
 config TPL_BLOCK_CACHE
        bool "Use block device cache in TPL"
        depends on TPL_BLK
-       default n
        help
          This option enables the disk-block cache in TPL
 

diff --git a/drivers/core/Kconfig b/drivers/core/Kconfig
index 9ae188c1dfc5b918227d2b5f565bd8ccd5aaafe2..8f7703c8b580c972b2f185eb97e9af5e04360230 100644 (file)
--- a/drivers/core/Kconfig
+++ b/drivers/core/Kconfig
@@ -80,7 +80,6 @@ config DM_DEVICE_REMOVE
 config SPL_DM_DEVICE_REMOVE
        bool "Support device removal in SPL"
        depends on SPL_DM
-       default n
        help
          We can save some code space by dropping support for removing a
          device. This is not normally required in SPL, so by default this
@@ -107,7 +106,6 @@ config DM_SEQ_ALIAS
 config SPL_DM_SEQ_ALIAS
        bool "Support numbered aliases in device tree in SPL"
        depends on SPL_DM
-       default n
        help
          Most boards will have a '/aliases' node containing the path to
          numbered devices (e.g. serial0 = &serial0). This feature can be
@@ -132,7 +130,6 @@ config TPL_DM_INLINE_OFNODE
 config DM_DMA
        bool "Support per-device DMA constraints"
        depends on DM
-       default n
        help
          Enable this to extract per-device DMA constraints, only supported on
          device-tree systems for now. This is needed in order translate
@@ -274,7 +271,6 @@ config OF_TRANSLATE
 config SPL_OF_TRANSLATE
        bool "Translate addresses using fdt_translate_address in SPL"
        depends on SPL_DM && SPL_OF_CONTROL
-       default n
        help
          If this option is enabled, the reg property will be translated
          using the fdt_translate_address() function. This is necessary

diff --git a/drivers/dfu/Kconfig b/drivers/dfu/Kconfig
index b50547476cbd37e978f77e4716c835a56b724526..48e41bc2629030d3df5014f60dbecff3e8987cb9 100644 (file)
--- a/drivers/dfu/Kconfig
+++ b/drivers/dfu/Kconfig
@@ -16,7 +16,6 @@ config DFU_OVER_TFTP
 if DFU
 config DFU_WRITE_ALT
        bool
-       default n
 
 config DFU_TFTP
        bool "DFU via TFTP"

diff --git a/drivers/dma/ti/Kconfig b/drivers/dma/ti/Kconfig
index 9cbd5f334dc819b51b92ce00b1a423f4007914ee..87c026e049031aa2575ed36674a87e20be12f864 100644 (file)
--- a/drivers/dma/ti/Kconfig
+++ b/drivers/dma/ti/Kconfig
@@ -9,7 +9,6 @@ config TI_K3_NAVSS_UDMA
         select TI_K3_NAVSS_RINGACC
         select TI_K3_NAVSS_PSILCFG
         select TI_K3_PSIL
-        default n
         help
           Support for UDMA used in K3 devices.
 endif

diff --git a/drivers/fastboot/Kconfig b/drivers/fastboot/Kconfig
index 2d1836a80e09becea542714ab50a7cbf586151f7..d5e4a02098a2da23f1b3ce4a1b4257c684e5f8d9 100644 (file)
--- a/drivers/fastboot/Kconfig
+++ b/drivers/fastboot/Kconfig
@@ -74,7 +74,6 @@ config FASTBOOT_FLASH
 
 config FASTBOOT_UUU_SUPPORT
        bool "Enable FASTBOOT i.MX UUU special command"
-       default n
        help
          The fastboot protocol includes "UCmd" and "ACmd" command.
          Be aware that you provide full access to any U-Boot command,

diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 4a89c1a62b708d13071a107561a3638fd2864344..ab9adbdd6e00f0aff4831efabfc62c5c14d08097 100644 (file)
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -39,7 +39,6 @@ config TPL_DM_GPIO
 config GPIO_HOG
        bool "Enable GPIO hog support"
        depends on DM_GPIO
-       default n
        help
          Enable gpio hog support
          The GPIO chip may contain GPIO hog definitions. GPIO hogging
@@ -91,13 +90,11 @@ config CORTINA_GPIO
 config DWAPB_GPIO
        bool "DWAPB GPIO driver"
        depends on DM && DM_GPIO
-       default n
        help
          Support for the Designware APB GPIO driver.
 
 config AT91_GPIO
        bool "AT91 PIO GPIO driver"
-       default n
        help
          Say yes here to select AT91 PIO GPIO driver. AT91 PIO
          controller manages up to 32 fully programmable input/output
@@ -110,7 +107,6 @@ config AT91_GPIO
 config ATMEL_PIO4
        bool "ATMEL PIO4 driver"
        depends on DM_GPIO
-       default n
        help
          Say yes here to support the Atmel PIO4 driver.
          The PIO4 is new version of Atmel PIO controller, which manages
@@ -150,13 +146,11 @@ config INTEL_ICH6_GPIO
 config IMX_RGPIO2P
        bool "i.MX7ULP RGPIO2P driver"
        depends on DM
-       default n
        help
          This driver supports i.MX7ULP Rapid GPIO2P controller.
 
 config IPROC_GPIO
        bool "Broadcom iProc GPIO driver(without pinconf)"
-       default n
        help
          The Broadcom iProc based SoCs- Cygnus, NS2, NS3, NSP and Stingray,
          use the same GPIO Controller IP hence this driver could be used
@@ -168,14 +162,12 @@ config IPROC_GPIO
 config HSDK_CREG_GPIO
        bool "HSDK CREG GPIO griver"
        depends on DM_GPIO
-       default n
        help
          This driver supports CREG GPIOs on Synopsys HSDK SOC.
 
 config LPC32XX_GPIO
        bool "LPC32XX GPIO driver"
        depends on DM
-       default n
        help
          Support for the LPC32XX GPIO driver.
 
@@ -203,7 +195,6 @@ config MSCC_SGPIO
 config MSM_GPIO
        bool "Qualcomm GPIO driver"
        depends on DM_GPIO
-       default n
        help
          Support GPIO controllers on Qualcomm Snapdragon family of SoCs.
          This controller have single bank (default name "soc"), every
@@ -345,7 +336,6 @@ config GPIO_UNIPHIER
 config VYBRID_GPIO
        bool "Vybrid GPIO driver"
        depends on DM
-       default n
        help
          Say yes here to support Vybrid vf610 GPIOs.
 

diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig
index 5d27f503bfcafe9dca6293f50c70ee6eb369f8f3..57cac4483f0a59ec7adfb56aa93f3f7c74dd3495 100644 (file)
--- a/drivers/i2c/Kconfig
+++ b/drivers/i2c/Kconfig
@@ -193,7 +193,6 @@ config SYS_I2C_CADENCE
 config SYS_I2C_CA
        tristate "Cortina-Access I2C Controller"
        depends on DM_I2C && CORTINA_PLATFORM
-       default n
        help
          Add support for the Cortina Access I2C host controller.
          Say yes here to select Cortina-Access I2C Host Controller.
@@ -206,7 +205,6 @@ config SYS_I2C_DAVINCI
 
 config SYS_I2C_DW
        bool "Designware I2C Controller"
-       default n
        help
          Say yes here to select the Designware I2C Host Controller. This
          controller is used in various SoCs, e.g. the ST SPEAr, Altera

diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig
index 1569e8c44aca892469d41cb3865bb719d0feebf4..e0927ce1c9bd6625e42b809af124d67c09bf011f 100644 (file)
--- a/drivers/mmc/Kconfig
+++ b/drivers/mmc/Kconfig
@@ -123,7 +123,6 @@ config MMC_IO_VOLTAGE
 
 config SPL_MMC_IO_VOLTAGE
        bool "Support IO voltage configuration in SPL"
-       default n
        help
          IO voltage configuration allows selecting the voltage level of the IO
          lines (not the level of main supply). This is required for UHS
@@ -193,7 +192,6 @@ config MMC_VERBOSE
 
 config MMC_TRACE
        bool "MMC debugging"
-       default n
        help
          This is an option for use by developer. Enable MMC core debugging.
 
@@ -221,7 +219,6 @@ config MMC_DW_CORTINA
        depends on DM_MMC
        depends on MMC_DW
        depends on BLK
-       default n
        help
          This selects support for Cortina SoC specific extensions to the
          Synopsys DesignWare Memory Card Interface driver. Select this option
@@ -770,7 +767,6 @@ config FTSDC010
 
 config FTSDC010_SDIO
        bool "Support ftsdc010 sdio"
-       default n
        depends on FTSDC010
        help
                This can enable ftsdc010 sdio function.
@@ -805,7 +801,6 @@ config FSL_ESDHC_SUPPORT_ADMA2
 config FSL_ESDHC_33V_IO_RELIABILITY_WORKAROUND
        bool "enable eSDHC workaround for 3.3v IO reliability issue"
        depends on FSL_ESDHC && DM_MMC
-       default n
        help
          When eSDHC operates at 3.3v, damage can accumulate in an internal
          level shifter at a higher than expected rate. The faster the interface

diff --git a/drivers/mtd/nand/raw/Kconfig b/drivers/mtd/nand/raw/Kconfig
index a901ce55111767e8b8427dc69e9be37f47c4e054..f7b1334ddb47a744c3ed1ef274fb4aa4dd406515 100644 (file)
--- a/drivers/mtd/nand/raw/Kconfig
+++ b/drivers/mtd/nand/raw/Kconfig
@@ -31,12 +31,10 @@ if NAND_ATMEL
 
 config ATMEL_NAND_HWECC
        bool "Atmel Hardware ECC"
-       default n
 
 config ATMEL_NAND_HW_PMECC
        bool "Atmel Programmable Multibit ECC (PMECC)"
        select ATMEL_NAND_HWECC
-       default n
        help
          The Programmable Multibit ECC (PMECC) controller is a programmable
          binary BCH(Bose, Chaudhuri and Hocquenghem) encoder and decoder.
@@ -59,7 +57,6 @@ config SPL_GENERATE_ATMEL_PMECC_HEADER
        bool "Atmel PMECC Header Generation"
        select ATMEL_NAND_HWECC
        select ATMEL_NAND_HW_PMECC
-       default n
        help
          Generate Programmable Multibit ECC (PMECC) header for SPL image.
 

diff --git a/drivers/mtd/spi/Kconfig b/drivers/mtd/spi/Kconfig
index b2291f7290597f00bda290f7656ecb68f0730d0f..ddeef37ffcfda3e8ef2dfba15ff1c40874ccd90e 100644 (file)
--- a/drivers/mtd/spi/Kconfig
+++ b/drivers/mtd/spi/Kconfig
@@ -99,7 +99,6 @@ config SPI_FLASH_SMART_HWCAPS
 
 config SPI_FLASH_SOFT_RESET
        bool "Software Reset support for SPI NOR flashes"
-       default n
        help
         Enable support for xSPI Software Reset. It will be used to switch from
         Octal DTR mode to legacy mode on shutdown and boot (if enabled).
@@ -107,7 +106,6 @@ config SPI_FLASH_SOFT_RESET
 config SPI_FLASH_SOFT_RESET_ON_BOOT
        bool "Perform a Software Reset on boot on flashes that boot in stateful mode"
        depends on SPI_FLASH_SOFT_RESET
-       default n
        help
         Perform a Software Reset on boot to allow detecting flashes that are
         handed to us in Octal DTR mode. Do not enable this config on flashes

diff --git a/drivers/mtd/ubi/Kconfig b/drivers/mtd/ubi/Kconfig
index a78fd51ba7dcf21c14e6b00cb56b5a131766ba94..67a3cf1d7a50ca003d109e4a9309b7e304c994a3 100644 (file)
--- a/drivers/mtd/ubi/Kconfig
+++ b/drivers/mtd/ubi/Kconfig
@@ -68,7 +68,6 @@ config MTD_UBI_BEB_LIMIT
 
 config MTD_UBI_FASTMAP
        bool "UBI Fastmap (Experimental feature)"
-       default n
        help
           Important: this feature is experimental so far and the on-flash
           format for fastmap may change in the next kernel versions

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 32f2708dc3341a08a49edba2a9006c209873ae04..0b906db5c1f8031f6c5b30c74b6f4eac72e9928e 100644 (file)
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -558,7 +558,6 @@ endif #DM_ETH
 
 config SMC911X_32_BIT
        bool "Enable SMC911X 32-bit interface"
-       default n
        help
          Define this if data bus is 32 bits. If your processor use a
          narrower 16 bit bus or cannot convert one 32 bit word to two 16 bit
@@ -713,7 +712,6 @@ config FEC1_PHY
 config PHY_NORXERR
        bool "PHY_NORXERR"
        depends on ETHER_ON_FEC1
-       default n
        help
          The PHY does not have a RXERR line (RMII only).
          (so program the FEC to ignore it).
@@ -738,7 +736,6 @@ config FEC2_PHY
 config FEC2_PHY_NORXERR
        bool "PHY_NORXERR"
        depends on ETHER_ON_FEC2
-       default n
        help
          The PHY does not have a RXERR line (RMII only).
          (so program the FEC to ignore it).

diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index 64d5ddf238507b9c49c2b8ccdd40330dde80fd5b..68ee7d7a2dd09ca23714f151302d81e0c7274f57 100644 (file)
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -71,7 +71,6 @@ menuconfig PHY_AQUANTIA
 
 config PHY_AQUANTIA_UPLOAD_FW
        bool "Aquantia firmware loading support"
-       default n
        depends on PHY_AQUANTIA
        help
                Aquantia PHYs use firmware which can be either loaded automatically
@@ -102,7 +101,6 @@ config PHY_CORTINA
 
 config SYS_CORTINA_NO_FW_UPLOAD
        bool "Cortina firmware loading support"
-       default n
        depends on PHY_CORTINA
        help
                Cortina phy has provision to store phy firmware in attached dedicated
@@ -250,7 +248,6 @@ config RTL8211X_PHY_FORCE_MASTER
 config RTL8211F_PHY_FORCE_EEE_RXC_ON
        bool "Ethernet PHY RTL8211F: do not stop receiving the xMII clock during LPI"
        depends on PHY_REALTEK
-       default n
        help
          The IEEE 802.3az-2010 (EEE) standard provides a protocol to coordinate
          transitions to/from a lower power consumption level (Low Power Idle

diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig
index 2ef4d46797e07ef3ee97fc76459a9202d090f33b..97d0de5b11d2a28e1e0bd50791f38260e7f09a67 100644 (file)
--- a/drivers/pci/Kconfig
+++ b/drivers/pci/Kconfig
@@ -29,7 +29,6 @@ config DM_PCI_COMPAT
 
 config PCI_AARDVARK
        bool "Enable Aardvark PCIe driver"
-       default n
        depends on DM_PCI
        depends on DM_GPIO
        depends on ARMADA_3700
@@ -48,7 +47,6 @@ config PCI_PNP
 config PCI_REGION_MULTI_ENTRY
        bool "Enable Multiple entries of region type MEMORY in ranges for PCI"
        depends on PCI || DM_PCI
-       default n
        help
          Enable PCI memory regions to be of multiple entry. Multiple entry
          here refers to allow more than one count of address ranges for MEMORY
@@ -59,7 +57,6 @@ config PCI_MAP_SYSTEM_MEMORY
        bool "Map local system memory from a virtual base address"
        depends on PCI || DM_PCI
        depends on MIPS
-       default n
        help
          Say Y if base address of system memory is being used as a virtual address
          instead of a physical address (e.g. on MIPS). The PCI core will then remap
@@ -71,7 +68,6 @@ config PCI_MAP_SYSTEM_MEMORY
 config PCI_SRIOV
        bool "Enable Single Root I/O Virtualization support for PCI"
        depends on PCI || DM_PCI
-       default n
        help
          Say Y here if you want to enable PCI Single Root I/O Virtualization
          capability support. This helps to enumerate Virtual Function devices
@@ -81,7 +77,6 @@ config PCI_SRIOV
 config PCI_ARID
         bool "Enable Alternate Routing-ID support for PCI"
         depends on PCI || DM_PCI
-        default n
         help
           Say Y here if you want to enable Alternate Routing-ID capability
           support on PCI devices. This helps to skip some devices in BDF
@@ -89,7 +84,6 @@ config PCI_ARID
 
 config PCIE_ECAM_GENERIC
        bool "Generic ECAM-based PCI host controller support"
-       default n
        depends on DM_PCI
        help
          Say Y here if you want to enable support for generic ECAM-based
@@ -97,7 +91,6 @@ config PCIE_ECAM_GENERIC
 
 config PCIE_ECAM_SYNQUACER
        bool "SynQuacer ECAM-based PCI host controller support"
-       default n
        depends on DM_PCI
        select PCI_INIT_R
        select PCI_REGION_MULTI_ENTRY
@@ -209,7 +202,6 @@ config PCI_XILINX
 
 config PCIE_LAYERSCAPE
        bool
-       default n
 
 config PCIE_LAYERSCAPE_RC
        bool "Layerscape PCIe Root Complex mode support"

diff --git a/drivers/phy/marvell/Kconfig b/drivers/phy/marvell/Kconfig
index 424002840359c7e869133829f26c15730baa0f72..b5f69c0a96d33a8f23a60a2cf86ec886b373409d 100644 (file)
--- a/drivers/phy/marvell/Kconfig
+++ b/drivers/phy/marvell/Kconfig
@@ -1,6 +1,5 @@
 config MVEBU_COMPHY_SUPPORT
        bool "ComPhy SerDes driver"
-       default n
        help
          Choose this option to add support
          for Comphy driver.

diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
index c5fbf1f832a90219a02be2f83db82a19a1c9e342..26257a72bc699fe0899a25b3eec1994618f02f03 100644 (file)
--- a/drivers/power/Kconfig
+++ b/drivers/power/Kconfig
@@ -248,7 +248,6 @@ endchoice
 config AXP_ALDO3_INRUSH_QUIRK
        bool "axp pmic (a)ldo3 inrush quirk"
        depends on AXP209_POWER
-       default n
        ---help---
        The reference design denotes a value of 4.7 uF for the output capacitor
        of LDO3. Some boards have too high capacitance causing  an inrush current
@@ -357,7 +356,6 @@ config AXP_FLDO3_VOLT
 config AXP_SW_ON
        bool "axp pmic sw on"
        depends on AXP809_POWER || AXP818_POWER
-       default n
        ---help---
        Enable to turn on axp pmic sw.
 

diff --git a/drivers/ram/aspeed/Kconfig b/drivers/ram/aspeed/Kconfig
index 049b9dc249282732d7df04d3a20be7e59ebb75a3..576d5af8688e8bc52e2a11290acfd604f6705c0a 100644 (file)
--- a/drivers/ram/aspeed/Kconfig
+++ b/drivers/ram/aspeed/Kconfig
@@ -3,7 +3,6 @@ if RAM || SPL_RAM
 config ASPEED_DDR4_DUALX8
        bool "Enable Dual X8 DDR4 die"
        depends on DM && OF_CONTROL && ARCH_ASPEED
-       default n
        help
                Say Y if dual X8 DDR4 die is used on the board.  The aspeed ddr sdram
                controller needs to know if the memory chip mounted on the board is dual
@@ -42,14 +41,12 @@ endchoice
 
 config ASPEED_BYPASS_SELFTEST
        bool "bypass self test during DRAM initialization"
-       default n
        help
          Say Y here to bypass DRAM self test to speed up the boot time
 
 config ASPEED_ECC
        bool "aspeed SDRAM error correcting code"
        depends on DM && OF_CONTROL && ARCH_ASPEED
-       default n
        help
          enable SDRAM ECC function
 

diff --git a/drivers/ram/octeon/Kconfig b/drivers/ram/octeon/Kconfig
index eb5a1208edf87e4ca2d1e9b972aa33a49f996698..f19957293f95cfbe57dc5bea928ae6899cc0abe7 100644 (file)
--- a/drivers/ram/octeon/Kconfig
+++ b/drivers/ram/octeon/Kconfig
@@ -1,7 +1,6 @@
 config RAM_OCTEON
        bool "Ram drivers for Octeon SoCs"
        depends on RAM && ARCH_OCTEON
-       default n
        help
         This enables support for RAM drivers for Octeon SoCs.
 
@@ -9,7 +8,6 @@ if RAM_OCTEON
 
 config RAM_OCTEON_DDR4
        bool "Octeon III DDR4 RAM support"
-       default n
        help
         This enables support for DDR4 RAM suppoort for Octeon III.  This does
         not include support for Octeon CN70XX.

diff --git a/drivers/ram/stm32mp1/Kconfig b/drivers/ram/stm32mp1/Kconfig
index 2fd8c7b7e3b89a10f3ac6eedc1bd66a35cc4329b..1aaf064c30cf3a1e0e114d6b1da9d9321cb6f4ec 100644 (file)
--- a/drivers/ram/stm32mp1/Kconfig
+++ b/drivers/ram/stm32mp1/Kconfig
@@ -23,7 +23,6 @@ config STM32MP1_DDR_INTERACTIVE
 config STM32MP1_DDR_INTERACTIVE_FORCE
        bool "STM32MP1 DDR driver : force interactive mode"
        depends on STM32MP1_DDR_INTERACTIVE
-       default n
        help
                force interactive mode in STM32MP1 DDR controller driver
                skip the polling of character 'd' in console

diff --git a/drivers/reboot-mode/Kconfig b/drivers/reboot-mode/Kconfig
index ac67bfcef623ae76eb800a2bf58b92074b926b37..63ea18cdf095774e898de11e913ea1f1fb977171 100644 (file)
--- a/drivers/reboot-mode/Kconfig
+++ b/drivers/reboot-mode/Kconfig
@@ -9,7 +9,6 @@ menu "Reboot Mode Support"
 config DM_REBOOT_MODE
        bool "Enable reboot mode using Driver Model"
        depends on DM
-       default n
        help
                Enable support for reboot mode control. This will allow users to
                adjust the boot process based on reboot mode parameter
@@ -18,7 +17,6 @@ config DM_REBOOT_MODE
 config DM_REBOOT_MODE_GPIO
        bool "Use GPIOs as reboot mode backend"
        depends on DM_REBOOT_MODE
-       default n
        help
                Use GPIOs to control the reboot mode. This will allow users to boot
                a device in a specific mode by using a GPIO that can be controlled
@@ -27,7 +25,6 @@ config DM_REBOOT_MODE_GPIO
 config DM_REBOOT_MODE_RTC
        bool "Use RTC as reboot mode backend"
        depends on DM_REBOOT_MODE
-       default n
        help
                Use RTC non volatile memory to control the reboot mode. This will allow users to boot
                a device in a specific mode by using a register(s) that can be controlled

diff --git a/drivers/rng/Kconfig b/drivers/rng/Kconfig
index 94915d45b39225bde0d0f4d42b4660de6136c025..b1c5ab93d15dd21263309959fc5bb1800b1fa6f4 100644 (file)
--- a/drivers/rng/Kconfig
+++ b/drivers/rng/Kconfig
@@ -34,14 +34,12 @@ config RNG_MSM
 config RNG_STM32MP1
        bool "Enable random number generator for STM32MP1"
        depends on ARCH_STM32MP
-       default n
        help
          Enable STM32MP1 rng driver.
 
 config RNG_ROCKCHIP
        bool "Enable random number generator for rockchip crypto rng"
        depends on ARCH_ROCKCHIP && DM_RNG
-       default n
        help
          Enable random number generator for rockchip.This driver is
          support rng module of crypto v1 and crypto v2.
@@ -49,7 +47,6 @@ config RNG_ROCKCHIP
 config RNG_IPROC200
        bool "Broadcom iProc RNG200 random number generator"
        depends on DM_RNG
-       default n
        help
          Enable random number generator for RPI4.
 endif

diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 93348c0929cf52d2008b9be555a722a8c04b1321..c972408826767a768e4e4fbfdc6b7e81d3a04eea 100644 (file)
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -137,7 +137,6 @@ config SERIAL_SEARCH_ALL
 config SERIAL_PROBE_ALL
        bool "Probe all available serial devices"
        depends on DM_SERIAL
-       default n
        help
          The serial subsystem only probes for a single serial device,
          but does not probe for other remaining serial devices.
@@ -621,7 +620,6 @@ config FSL_LPUART
 
 config MVEBU_A3700_UART
        bool "UART support for Armada 3700"
-       default n
        help
          Choose this option to add support for UART driver on the Marvell
          Armada 3700 SoC. The base address is configured via DT.

diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 427b360af182fca323c78545d08cfe0110d3303c..8957bb56a6be734937e474bd28be78f9befd6b7a 100644 (file)
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -146,7 +146,6 @@ config USB_EHCI_MARVELL
 config USB_EHCI_MX5
        bool "Support for i.MX5 on-chip EHCI USB controller"
        depends on ARCH_MX5
-       default n
        help
          Enables support for the on-chip EHCI controller on i.MX5 SoCs.
 
@@ -195,7 +194,6 @@ config USB_EHCI_MSM
        depends on DM_USB
        select USB_ULPI_VIEWPORT
        select MSM8916_USB_PHY
-       default n
        ---help---
          Enables support for the on-chip EHCI controller on Qualcomm
          Snapdragon SoCs.
@@ -222,13 +220,11 @@ config USB_EHCI_GENERIC
        bool "Support for generic EHCI USB controller"
        depends on DM_USB
        default ARCH_SUNXI
-       default n
        ---help---
          Enables support for generic EHCI controller.
 
 config USB_EHCI_FSL
        bool  "Support for FSL on-chip EHCI USB controller"
-       default n
        select  CONFIG_EHCI_HCD_INIT_AFTER_RESET
        ---help---
          Enables support for the on-chip EHCI controller on FSL chips.

diff --git a/drivers/usb/musb-new/Kconfig b/drivers/usb/musb-new/Kconfig
index a9a7c2675ef1c6f302606a486cf59a4ebf5d2d71..6dd830cb73b21f0753da304f22fe7c051e3ebee2 100644 (file)
--- a/drivers/usb/musb-new/Kconfig
+++ b/drivers/usb/musb-new/Kconfig
@@ -34,7 +34,6 @@ config USB_MUSB_TI
        bool "Enable TI OTG USB controller"
        depends on AM33XX
        select USB_MUSB_DSPS
-       default n
        help
          Say y here to enable support for the dual role high
          speed USB controller based on the Mentor Graphics
@@ -53,7 +52,6 @@ config USB_MUSB_DSPS
 config USB_MUSB_MT85XX
        bool "Enable Mediatek MT85XX DRC USB controller"
        depends on ARCH_MEDIATEK
-       default n
        help
          Say y to enable Mediatek MT85XX USB DRC controller support
          if it is available on your Mediatek MUSB IP based platform.

diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 8b940d70eb2122ca6e7b10b03419297092aac107..b1f8a9c1e6272fa2826906b900caf286543d54cf 100644 (file)
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -259,7 +259,6 @@ config VIDEO_EFI
 
 config VIDEO_VESA
        bool "Enable VESA video driver support"
-       default n
        help
          Turn on this option to enable a very simple driver which uses vesa
          to discover the video mode and then provides a frame buffer for use
@@ -406,7 +405,6 @@ config FRAMEBUFFER_VESA_MODE
 
 config VIDEO_LCD_ANX9804
        bool "ANX9804 bridge chip"
-       default n
        ---help---
        Support for the ANX9804 bridge chip, which can take pixel data coming
        from a parallel LCD interface and translate it on the fy into a DP
@@ -416,7 +414,6 @@ config VIDEO_LCD_ORISETECH_OTM8009A
        bool "OTM8009A DSI LCD panel support"
        depends on DM_VIDEO
        select VIDEO_MIPI_DSI
-       default n
        help
        Say Y here if you want to enable support for Orise Technology
        otm8009a 480x800 dsi 2dl panel.
@@ -425,14 +422,12 @@ config VIDEO_LCD_RAYDIUM_RM68200
        bool "RM68200 DSI LCD panel support"
        depends on DM_VIDEO
        select VIDEO_MIPI_DSI
-       default n
        help
        Say Y here if you want to enable support for Raydium RM68200
        720x1280 DSI video mode panel.
 
 config VIDEO_LCD_SSD2828
        bool "SSD2828 bridge chip"
-       default n
        ---help---
        Support for the SSD2828 bridge chip, which can take pixel data coming
        from a parallel LCD interface and translate it on the fly into MIPI DSI
@@ -463,14 +458,12 @@ config VIDEO_LCD_TDO_TL070WSH30
        bool "TDO TL070WSH30 DSI LCD panel support"
        depends on DM_VIDEO
        select VIDEO_MIPI_DSI
-       default n
        help
        Say Y here if you want to enable support for TDO TL070WSH30
        1024x600 DSI video mode panel.
 
 config VIDEO_LCD_HITACHI_TX18D42VM
        bool "Hitachi tx18d42vm LVDS LCD panel support"
-       default n
        ---help---
        Support for Hitachi tx18d42vm LVDS LCD panels, these panels have a
        lcd controller which needs to be initialized over SPI, once that is
@@ -523,7 +516,6 @@ source "drivers/video/meson/Kconfig"
 
 config VIDEO_MVEBU
        bool "Armada XP LCD controller"
-       default n
        ---help---
        Support for the LCD controller integrated in the Marvell
        Armada XP SoC.
@@ -536,14 +528,12 @@ config VIDEO_OMAP3
 
 config I2C_EDID
        bool "Enable EDID library"
-       default n
        help
           This enables library for accessing EDID data from an LCD panel.
 
 config DISPLAY
        bool "Enable Display support"
        depends on DM
-       default n
        select I2C_EDID
        help
           This supports drivers that provide a display, such as eDP (Embedded
@@ -554,7 +544,6 @@ config DISPLAY
 config NXP_TDA19988
        bool "Enable NXP TDA19988 support"
        depends on DISPLAY
-       default n
        help
          This enables support for the NXP TDA19988 HDMI encoder. This encoder
          will convert RGB data streams into HDMI-encoded signals.
@@ -868,7 +857,6 @@ config VIDEO_MCDE_SIMPLE
 config OSD
        bool "Enable OSD support"
        depends on DM
-       default n
        help
           This supports drivers that provide a OSD (on-screen display), which
           is a (usually text-oriented) graphics buffer to show information on
@@ -1008,7 +996,6 @@ config BMP_32BPP
 
 config VIDEO_VCXK
        bool "Enable VCXK video controller driver support"
-       default n
        help
          This enables VCXK driver which can be used with VC2K, VC4K
          and VC8K devices on various boards from BuS Elektronik GmbH.

diff --git a/drivers/w1/Kconfig b/drivers/w1/Kconfig
index 031bab25aea077f81516a219ef43b70dba2f4759..a2c51083b15664b4a7be0a3ce48ae973214df713 100644 (file)
--- a/drivers/w1/Kconfig
+++ b/drivers/w1/Kconfig
@@ -6,7 +6,6 @@ menu "1-Wire support"
 
 config W1
        bool "Enable 1-wire controllers support"
-       default no
        depends on DM
        help
          Support for the Dallas 1-Wire bus.
@@ -15,14 +14,12 @@ if W1
 
 config W1_GPIO
        bool "Enable 1-wire GPIO bitbanging"
-       default no
        depends on DM_GPIO
        help
          Emulate a 1-wire bus using a GPIO.
 
 config W1_MXC
        bool "Enable 1-wire controller on i.MX processors"
-       default no
        depends on ARCH_MX25 || ARCH_MX31 || ARCH_MX5
        help
          Support the one wire controller found in some members of the NXP

diff --git a/env/Kconfig b/env/Kconfig
index 760e62521c981c03f4d5c16254a0020f7ef53488..f75f2b13536af6f1a059a10933f642e6ba10ea11 100644 (file)
--- a/env/Kconfig
+++ b/env/Kconfig
@@ -685,7 +685,6 @@ config ENV_FDT_PATH
 
 config ENV_APPEND
        bool "Always append the environment with new data"
-       default n
        help
          If defined, the environment hash table is only ever appended with new
          data, but the existing hash table can never be dropped and reloaded
@@ -694,7 +693,6 @@ config ENV_APPEND
 
 config ENV_WRITEABLE_LIST
        bool "Permit write access only to listed variables"
-       default n
        help
          If defined, only environment variables which explicitly set the 'w'
          writeable flag can be written and modified at runtime. No variables
@@ -702,7 +700,6 @@ config ENV_WRITEABLE_LIST
 
 config ENV_ACCESS_IGNORE_FORCE
        bool "Block forced environment operations"
-       default n
        help
          If defined, don't allow the -f switch to env set override variable
          access flags.

diff --git a/lib/Kconfig b/lib/Kconfig
index c535147aeaa0c512936a08f746a8ccf46cf5f8f7..47f82f7ba4bd8517be14bdc651482b3fb3f49192 100644 (file)
--- a/lib/Kconfig
+++ b/lib/Kconfig
@@ -92,7 +92,6 @@ config TPL_SPRINTF
 
 config SSCANF
        bool
-       default n
 
 config STRTO
        bool
@@ -348,7 +347,6 @@ menu "Android Verified Boot"
 config LIBAVB
        bool "Android Verified Boot 2.0 support"
        depends on ANDROID_BOOT_IMAGE
-       default n
        help
          This enables support of Android Verified Boot 2.0 which can be used
          to assure the end user of the integrity of the software running on a
@@ -773,7 +771,6 @@ endmenu
 
 config PHANDLE_CHECK_SEQ
        bool "Enable phandle check while getting sequence number"
-       default n
        help
          When there are multiple device tree nodes with same name,
           enable this config option to distinguish them using

diff --git a/lib/efi_loader/Kconfig b/lib/efi_loader/Kconfig
index dacc3b58810dfb5c405cbe45b18c933d76c4dad2..0e5231b92522e75974643dc40f48dd653670ea23 100644 (file)
--- a/lib/efi_loader/Kconfig
+++ b/lib/efi_loader/Kconfig
@@ -38,7 +38,6 @@ config CMD_BOOTEFI_BOOTMGR
 
 config EFI_SETUP_EARLY
        bool
-       default n
 
 choice
        prompt "Store for non-volatile UEFI variables"
@@ -112,7 +111,6 @@ config EFI_SET_TIME
        bool "SetTime() runtime service"
        depends on EFI_GET_TIME
        default y if ARCH_QEMU || SANDBOX
-       default n
        help
          Provide the SetTime() runtime service at boottime. This service
          can be used by an EFI application to adjust the real time clock.
@@ -122,7 +120,6 @@ config EFI_HAVE_CAPSULE_SUPPORT
 
 config EFI_RUNTIME_UPDATE_CAPSULE
        bool "UpdateCapsule() runtime service"
-       default n
        select EFI_HAVE_CAPSULE_SUPPORT
        help
          Select this option if you want to use UpdateCapsule and
@@ -131,7 +128,6 @@ config EFI_RUNTIME_UPDATE_CAPSULE
 config EFI_CAPSULE_ON_DISK
        bool "Enable capsule-on-disk support"
        select EFI_HAVE_CAPSULE_SUPPORT
-       default n
        help
          Select this option if you want to use capsule-on-disk feature,
          that is, capsules can be fetched and executed from files
@@ -141,7 +137,6 @@ config EFI_CAPSULE_ON_DISK
 config EFI_IGNORE_OSINDICATIONS
        bool "Ignore OsIndications for CapsuleUpdate on-disk"
        depends on EFI_CAPSULE_ON_DISK
-       default n
        help
          There are boards where U-Boot does not support SetVariable at runtime.
          Select this option if you want to use the capsule-on-disk feature
@@ -151,7 +146,6 @@ config EFI_IGNORE_OSINDICATIONS
 config EFI_CAPSULE_ON_DISK_EARLY
        bool "Initiate capsule-on-disk at U-Boot boottime"
        depends on EFI_CAPSULE_ON_DISK
-       default n
        select EFI_SETUP_EARLY
        help
          Normally, without this option enabled, capsules will be
@@ -162,7 +156,6 @@ config EFI_CAPSULE_ON_DISK_EARLY
 
 config EFI_CAPSULE_FIRMWARE
        bool
-       default n
 
 config EFI_CAPSULE_FIRMWARE_MANAGEMENT
        bool "Capsule: Firmware Management Protocol"
@@ -209,7 +202,6 @@ config EFI_CAPSULE_AUTHENTICATE
        select PKCS7_VERIFY
        select IMAGE_SIGN_INFO
        select EFI_SIGNATURE_SUPPORT
-       default n
        help
          Select this option if you want to enable capsule
          authentication
@@ -277,7 +269,6 @@ endif
 config EFI_LOADER_BOUNCE_BUFFER
        bool "EFI Applications use bounce buffers for DMA operations"
        depends on ARM64
-       default n
        help
          Some hardware does not support DMA to full 64bit addresses. For this
          hardware we can create a bounce buffer so that payloads don't have to
@@ -364,7 +355,6 @@ config EFI_SECURE_BOOT
        select PKCS7_MESSAGE_PARSER
        select PKCS7_VERIFY
        select EFI_SIGNATURE_SUPPORT
-       default n
        help
          Select this option to enable EFI secure boot support.
          Once SecureBoot mode is enforced, any EFI binary can run only if

diff --git a/lib/optee/Kconfig b/lib/optee/Kconfig
index c398f9b953577f7575b9c629a70d3ba1048bb065..3290b6656d923f02cf7b7cd72bb614f5b6abaed1 100644 (file)
--- a/lib/optee/Kconfig
+++ b/lib/optee/Kconfig
@@ -34,7 +34,6 @@ config BOOTM_OPTEE
        bool "Support OPTEE bootm command"
        select BOOTM_LINUX
        depends on OPTEE
-       default n
        help
          Select this command to enable chain-loading of a Linux kernel
          via an OPTEE firmware.

diff --git a/net/Kconfig b/net/Kconfig
index ba0ca813ce5245fa6918e9905de992c7f6e86e15..7a2d145018815c622dec7d37fba3753a3819dc46 100644 (file)
--- a/net/Kconfig
+++ b/net/Kconfig
@@ -40,7 +40,6 @@ config NETCONSOLE
 
 config IP_DEFRAG
        bool "Support IP datagram reassembly"
-       default n
        help
          Selecting this will enable IP datagram reassembly according
          to the algorithm in RFC815.