]> git.dujemihanovic.xyz Git - u-boot.git/commitdiff
mx6ul_14x14_evk: Adjust SPL DDR3 settings
authorFabio Estevam <fabio.estevam@nxp.com>
Mon, 29 Aug 2016 23:37:17 +0000 (20:37 -0300)
committerStefano Babic <sbabic@denx.de>
Tue, 6 Sep 2016 16:22:48 +0000 (18:22 +0200)
Adjust DDR3 initialization done in SPL by comparing them against
the NXP DCD table.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Eric Nelson <eric@nelint.com>
board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c

index 126e499f923d00330dde28b62b003c63b645307e..4a1e60d828c2d75e4dae142c1ec71d6874aee6c8 100644 (file)
@@ -777,17 +777,17 @@ static struct mx6ul_iomux_ddr_regs mx6_ddr_ioregs = {
        .dram_odt0 = 0x00000030,
        .dram_odt1 = 0x00000030,
        .dram_sdba2 = 0x00000000,
-       .dram_sdclk_0 = 0x00000008,
-       .dram_sdqs0 = 0x00000038,
+       .dram_sdclk_0 = 0x00000030,
+       .dram_sdqs0 = 0x00000030,
        .dram_sdqs1 = 0x00000030,
        .dram_reset = 0x00000030,
 };
 
 static struct mx6_mmdc_calibration mx6_mmcd_calib = {
-       .p0_mpwldectrl0 = 0x00070007,
-       .p0_mpdgctrl0 = 0x41490145,
-       .p0_mprddlctl = 0x40404546,
-       .p0_mpwrdlctl = 0x4040524D,
+       .p0_mpwldectrl0 = 0x00000000,
+       .p0_mpdgctrl0 = 0x41570155,
+       .p0_mprddlctl = 0x4040474A,
+       .p0_mpwrdlctl = 0x40405550,
 };
 
 struct mx6_ddr_sysinfo ddr_sysinfo = {
@@ -797,7 +797,7 @@ struct mx6_ddr_sysinfo ddr_sysinfo = {
        .cs1_mirror = 0,
        .rtt_wr = 2,
        .rtt_nom = 1,           /* RTT_Nom = RZQ/2 */
-       .walat = 1,             /* Write additional latency */
+       .walat = 0,             /* Write additional latency */
        .ralat = 5,             /* Read additional latency */
        .mif3_mode = 3,         /* Command prediction working mode */
        .bi_on = 1,             /* Bank interleaving enabled */