pinctrl: stm32: display bias information for all pins

Display the bias information for input gpios or AF configuration,
and not only for output pin, as described in Reference manual
(Table 81. Port bit configuration table).

Fixes: da7a0bb1f279 ("pinctrl: stm32: add information on pin configuration")
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>

diff --git a/drivers/pinctrl/pinctrl_stm32.c b/drivers/pinctrl/pinctrl_stm32.c
index dbea99532cb3f5767e64bc4d44de0fa4af24b9da..262b2c3d7e5f1803635b7e7cb9ab10a264d7447b 100644 (file)
--- a/drivers/pinctrl/pinctrl_stm32.c
+++ b/drivers/pinctrl/pinctrl_stm32.c
@@ -48,15 +48,15 @@ static const char * const pinmux_mode[PINMUX_MODE_COUNT] = {
        "alt function",
 };
 
-static const char * const pinmux_output[] = {
-       [STM32_GPIO_PUPD_NO] = "bias-disable",
-       [STM32_GPIO_PUPD_UP] = "bias-pull-up",
-       [STM32_GPIO_PUPD_DOWN] = "bias-pull-down",
+static const char * const pinmux_bias[] = {
+       [STM32_GPIO_PUPD_NO] = "",
+       [STM32_GPIO_PUPD_UP] = "pull-up",
+       [STM32_GPIO_PUPD_DOWN] = "pull-down",
 };
 
 static const char * const pinmux_input[] = {
-       [STM32_GPIO_OTYPE_PP] = "drive-push-pull",
-       [STM32_GPIO_OTYPE_OD] = "drive-open-drain",
+       [STM32_GPIO_OTYPE_PP] = "push-pull",
+       [STM32_GPIO_OTYPE_OD] = "open-drain",
 };
 
 static int stm32_pinctrl_get_af(struct udevice *dev, unsigned int offset)
@@ -213,6 +213,7 @@ static int stm32_pinctrl_get_pin_muxing(struct udevice *dev,
        dev_dbg(dev, "selector = %d gpio_idx = %d mode = %d\n",
                selector, gpio_idx, mode);
        priv = dev_get_priv(gpio_dev);
+       pupd = (readl(&priv->regs->pupdr) >> (gpio_idx * 2)) & PUPD_MASK;
 
 
        switch (mode) {
@@ -224,20 +225,19 @@ static int stm32_pinctrl_get_pin_muxing(struct udevice *dev,
                break;
        case GPIOF_FUNC:
                af_num = stm32_pinctrl_get_af(gpio_dev, gpio_idx);
-               snprintf(buf, size, "%s %d", pinmux_mode[mode], af_num);
+               snprintf(buf, size, "%s %d %s", pinmux_mode[mode], af_num,
+                        pinmux_bias[pupd]);
                break;
        case GPIOF_OUTPUT:
-               pupd = (readl(&priv->regs->pupdr) >> (gpio_idx * 2)) &
-                      PUPD_MASK;
                snprintf(buf, size, "%s %s %s",
-                        pinmux_mode[mode], pinmux_output[pupd],
+                        pinmux_mode[mode], pinmux_bias[pupd],
                         label ? label : "");
                break;
        case GPIOF_INPUT:
                otype = (readl(&priv->regs->otyper) >> gpio_idx) & OTYPE_MSK;
-               snprintf(buf, size, "%s %s %s",
+               snprintf(buf, size, "%s %s %s %s",
                         pinmux_mode[mode], pinmux_input[otype],
-                        label ? label : "");
+                        pinmux_bias[pupd], label ? label : "");
                break;
        }