tegra2: Add common Avionic Design Tamonten support.

Tamonten is an NVIDIA Tegra2-based SO-DIMM processor module that is
derived from the Harmony reference design.

Changes in v3:
  * Remove unused gpio_config_uart().
  * Remove call to tegra2_start().
  * Use new tegra2_mmc_init().

Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Acked-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>

diff --git a/board/avionic-design/common/tamonten.c b/board/avionic-design/common/tamonten.c
new file mode 100644 (file)
index 0000000..98aa0f8
--- /dev/null
+++ b/board/avionic-design/common/tamonten.c
@@ -0,0 +1,160 @@
+/*
+ *  (C) Copyright 2010,2011
+ *  NVIDIA Corporation <www.nvidia.com>
+ *  (C) Copyright 2011
+ *  Avionic Design GmbH <www.avionic-design.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <ns16550.h>
+#include <asm/io.h>
+#include <asm/gpio.h>
+#include <asm/arch/tegra2.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/clk_rst.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/pinmux.h>
+#include <asm/arch/uart.h>
+#include <asm/arch/mmc.h>
+#include "tamonten.h"
+
+#ifdef CONFIG_TEGRA2_MMC
+#include <mmc.h>
+#endif
+
+DECLARE_GLOBAL_DATA_PTR;
+
+const struct tegra2_sysinfo sysinfo = {
+       CONFIG_TEGRA2_BOARD_STRING
+};
+
+/*
+ * Routine: timer_init
+ * Description: init the timestamp and lastinc value
+ */
+int timer_init(void)
+{
+       return 0;
+}
+
+static void enable_uart(enum periph_id pid)
+{
+       /* Assert UART reset and enable clock */
+       reset_set_enable(pid, 1);
+       clock_enable(pid);
+       clock_ll_set_source(pid, 0);    /* UARTx_CLK_SRC = 00, PLLP_OUT0 */
+
+       /* wait for 2us */
+       udelay(2);
+
+       /* De-assert reset to UART */
+       reset_set_enable(pid, 0);
+}
+
+/*
+ * Routine: clock_init_uart
+ * Description: init the PLL and clock for the UART(s)
+ */
+static void clock_init_uart(void)
+{
+#if defined(CONFIG_TEGRA2_ENABLE_UARTD)
+       enable_uart(PERIPH_ID_UART4);
+#endif /* CONFIG_TEGRA2_ENABLE_UARTD */
+}
+
+/*
+ * Routine: pin_mux_uart
+ * Description: setup the pin muxes/tristate values for the UART(s)
+ */
+static void pin_mux_uart(void)
+{
+#if defined(CONFIG_TEGRA2_ENABLE_UARTD)
+       pinmux_set_func(PINGRP_GMC, PMUX_FUNC_UARTD);
+
+       pinmux_tristate_disable(PINGRP_GMC);
+#endif /* CONFIG_TEGRA2_ENABLE_UARTD */
+}
+
+#ifdef CONFIG_TEGRA2_MMC
+/*
+ * Routine: pin_mux_mmc
+ * Description: setup the pin muxes/tristate values for the SDMMC(s)
+ */
+static void pin_mux_mmc(void)
+{
+       /* SDMMC4: config 3, x8 on 2nd set of pins */
+       pinmux_set_func(PINGRP_ATB, PMUX_FUNC_SDIO4);
+       pinmux_set_func(PINGRP_GMA, PMUX_FUNC_SDIO4);
+       pinmux_set_func(PINGRP_GME, PMUX_FUNC_SDIO4);
+
+       pinmux_tristate_disable(PINGRP_ATB);
+       pinmux_tristate_disable(PINGRP_GMA);
+       pinmux_tristate_disable(PINGRP_GME);
+}
+#endif
+
+/*
+ * Routine: board_init
+ * Description: Early hardware init.
+ */
+int board_init(void)
+{
+       clock_init();
+       clock_verify();
+
+       /* boot param addr */
+       gd->bd->bi_boot_params = (NV_PA_SDRAM_BASE + 0x100);
+
+       return 0;
+}
+
+#ifdef CONFIG_TEGRA2_MMC
+/* this is a weak define that we are overriding */
+int board_mmc_init(bd_t *bd)
+{
+       debug("board_mmc_init called\n");
+       /* Enable muxes, etc. for SDMMC controllers */
+       pin_mux_mmc();
+       gpio_config_mmc();
+
+       debug("board_mmc_init: init eMMC\n");
+       /* init dev 0, eMMC chip, with 4-bit bus */
+       tegra2_mmc_init(0, 4, -1, GPIO_PH2);
+
+       return 0;
+}
+#endif
+
+#ifdef CONFIG_BOARD_EARLY_INIT_F
+int board_early_init_f(void)
+{
+       /* Initialize essential common plls */
+       clock_early_init();
+
+       /* Initialize UART clocks */
+       clock_init_uart();
+
+       /* Initialize periph pinmuxes */
+       pin_mux_uart();
+
+       return 0;
+}
+#endif /* EARLY_INIT */

diff --git a/board/avionic-design/common/tamonten.h b/board/avionic-design/common/tamonten.h
new file mode 100644 (file)
index 0000000..0e60b0f
--- /dev/null
+++ b/board/avionic-design/common/tamonten.h
@@ -0,0 +1,32 @@
+/*
+ *  (C) Copyright 2010,2011
+ *  NVIDIA Corporation <www.nvidia.com>
+ *  (C) Copyright 2011
+ *  Avionic Design GmbH <www.avionic-design.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _TAMONTEN_H_
+#define _TAMONTEN_H_
+
+void tegra2_start(void);
+void gpio_config_mmc(void);
+
+#endif /* TAMONTEN_H */