arm: imx6: Switch DDR3 calibration to wait_for_bit()

Switch the DDR3 calibration from ad-hoc implementation of wait_for_bit()
to generic implementation of wait_for_bit().

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
Reviewed-by: Stefano Babic <sbabic@denx.de>

diff --git a/arch/arm/cpu/armv7/mx6/ddr.c b/arch/arm/cpu/armv7/mx6/ddr.c
index e457febf678b102ef29e90182ed8db54a942a5be..1e7ae289337fd665177cda4a6ddcf8b2c893798d 100644 (file)
--- a/arch/arm/cpu/armv7/mx6/ddr.c
+++ b/arch/arm/cpu/armv7/mx6/ddr.c
@@ -12,40 +12,20 @@
 #include <asm/arch/sys_proto.h>
 #include <asm/io.h>
 #include <asm/types.h>
+#include <wait_bit.h>
 
 #if defined(CONFIG_MX6QDL) || defined(CONFIG_MX6Q) || defined(CONFIG_MX6D)
 
-static int wait_for_bit(void *reg, const uint32_t mask, bool set)
-{
-       unsigned int timeout = 1000;
-       u32 val;
-
-       while (--timeout) {
-               val = readl(reg);
-               if (!set)
-                       val = ~val;
-
-               if ((val & mask) == mask)
-                       return 0;
-
-               udelay(1);
-       }
-
-       printf("%s: Timeout (reg=%p mask=%08x wait_set=%i)\n",
-             __func__, reg, mask, set);
-       hang(); /* DRAM couldn't be calibrated, game over :-( */
-}
-
 static void reset_read_data_fifos(void)
 {
        struct mmdc_p_regs *mmdc0 = (struct mmdc_p_regs *)MMDC_P0_BASE_ADDR;
 
        /* Reset data FIFOs twice. */
        setbits_le32(&mmdc0->mpdgctrl0, 1 << 31);
-       wait_for_bit(&mmdc0->mpdgctrl0, 1 << 31, 0);
+       wait_for_bit("MMDC", &mmdc0->mpdgctrl0, 1 << 31, 0, 100, 0);
 
        setbits_le32(&mmdc0->mpdgctrl0, 1 << 31);
-       wait_for_bit(&mmdc0->mpdgctrl0, 1 << 31, 0);
+       wait_for_bit("MMDC", &mmdc0->mpdgctrl0, 1 << 31, 0, 100, 0);
 }
 
 static void precharge_all(const bool cs0_enable, const bool cs1_enable)
@@ -60,12 +40,12 @@ static void precharge_all(const bool cs0_enable, const bool cs1_enable)
         */
        if (cs0_enable) { /* CS0 */
                writel(0x04008050, &mmdc0->mdscr);
-               wait_for_bit(&mmdc0->mdscr, 1 << 14, 1);
+               wait_for_bit("MMDC", &mmdc0->mdscr, 1 << 14, 1, 100, 0);
        }
 
        if (cs1_enable) { /* CS1 */
                writel(0x04008058, &mmdc0->mdscr);
-               wait_for_bit(&mmdc0->mdscr, 1 << 14, 1);
+               wait_for_bit("MMDC", &mmdc0->mdscr, 1 << 14, 1, 100, 0);
        }
 }
 
@@ -164,7 +144,7 @@ int mmdc_do_write_level_calibration(void)
         * 7. Upon completion of this process the MMDC de-asserts
         * the MPWLGCR[HW_WL_EN]
         */
-       wait_for_bit(&mmdc0->mpwlgcr, 1 << 0, 0);
+       wait_for_bit("MMDC", &mmdc0->mpwlgcr, 1 << 0, 0, 100, 0);
 
        /*
         * 8. check for any errors: check both PHYs for x64 configuration,
@@ -289,7 +269,7 @@ int mmdc_do_dqs_calibration(void)
                writel(0x00008028, &mmdc0->mdscr);
 
        /* poll to make sure the con_ack bit was asserted */
-       wait_for_bit(&mmdc0->mdscr, 1 << 14, 1);
+       wait_for_bit("MMDC", &mmdc0->mdscr, 1 << 14, 1, 100, 0);
 
        /*
         * Check MDMISC register CALIB_PER_CS to see which CS calibration
@@ -327,7 +307,7 @@ int mmdc_do_dqs_calibration(void)
         * this bit until it clears to indicate completion of the write access.
         */
        setbits_le32(&mmdc0->mpswdar0, 1);
-       wait_for_bit(&mmdc0->mpswdar0, 1 << 0, 0);
+       wait_for_bit("MMDC", &mmdc0->mpswdar0, 1 << 0, 0, 100, 0);
 
        /* Set the RD_DL_ABS# bits to their default values
         * (will be calibrated later in the read delay-line calibration).
@@ -372,7 +352,7 @@ int mmdc_do_dqs_calibration(void)
        setbits_le32(&mmdc0->mpdgctrl0, 5 << 28);
 
        /* Poll for completion.  MPDGCTRL0[HW_DG_EN] should be 0 */
-       wait_for_bit(&mmdc0->mpdgctrl0, 1 << 28, 0);
+       wait_for_bit("MMDC", &mmdc0->mpdgctrl0, 1 << 28, 0, 100, 0);
 
        /*
         * Check to see if any errors were encountered during calibration
@@ -431,7 +411,7 @@ int mmdc_do_dqs_calibration(void)
         * setting MPRDDLHWCTL[HW_RD_DL_EN] = 0.   Also, ensure that
         * no error bits were set.
         */
-       wait_for_bit(&mmdc0->mprddlhwctl, 1 << 4, 0);
+       wait_for_bit("MMDC", &mmdc0->mprddlhwctl, 1 << 4, 0, 100, 0);
 
        /* check both PHYs for x64 configuration, if x32, check only PHY0 */
        if (readl(&mmdc0->mprddlhwctl) & 0x0000000f)
@@ -484,7 +464,7 @@ int mmdc_do_dqs_calibration(void)
         * by setting MPWRDLHWCTL[HW_WR_DL_EN] = 0.
         * Also, ensure that no error bits were set.
         */
-       wait_for_bit(&mmdc0->mpwrdlhwctl, 1 << 4, 0);
+       wait_for_bit("MMDC", &mmdc0->mpwrdlhwctl, 1 << 4, 0, 100, 0);
 
        /* Check both PHYs for x64 configuration, if x32, check only PHY0 */
        if (readl(&mmdc0->mpwrdlhwctl) & 0x0000000f)
@@ -532,7 +512,7 @@ int mmdc_do_dqs_calibration(void)
        writel(0x0, &mmdc0->mdscr);     /* CS0 */
 
        /* Poll to make sure the con_ack bit is clear */
-       wait_for_bit(&mmdc0->mdscr, 1 << 14, 0);
+       wait_for_bit("MMDC", &mmdc0->mdscr, 1 << 14, 0, 100, 0);
 
        /*
         * Print out the registers that were updated as a result