#define CONFIG_LOADADDR 800000 /* default location for tftp and bootm */
+#define CONFIG_USE_PREBOOT
#define CONFIG_PREBOOT "echo;" \
"echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
"echo"
/* default location for tftp and bootm */
#define CONFIG_LOADADDR 400000
+#define CONFIG_USE_PREBOOT
#define CONFIG_PREBOOT "echo;" \
"echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
"echo"
#ifdef CONFIG_USB_MUSB_HCD
#ifdef CONFIG_USB_KEYBOARD
+#define CONFIG_USE_PREBOOT
#define CONFIG_PREBOOT "usb start"
#endif /* CONFIG_USB_KEYBOARD */
#ifdef CONFIG_USB_MUSB_HOST
#ifdef CONFIG_USB_KEYBOARD
+#define CONFIG_USE_PREBOOT
#define CONFIG_PREBOOT "usb start"
#endif /* CONFIG_USB_KEYBOARD */
#define CONFIG_SYS_CBSIZE 2048 /* console I/O buffer */
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
/* Boot argument buffer size */
+#define CONFIG_USE_PREBOOT
#define CONFIG_PREBOOT "run check_flash check_env;"
/*
#define CONFIG_SYS_INIT_SP_ADDR CONFIG_IRAM_STACK
+#define CONFIG_USE_PREBOOT
#define CONFIG_PREBOOT
#define CONFIG_S5P_PA_SYSRAM 0x02020000
/*
* Save the prior stage provided DTB.
*/
+#define CONFIG_USE_PREBOOT
#define CONFIG_PREBOOT \
"fdt addr ${fdtcontroladdr};" \
"fdt move ${fdtcontroladdr} ${fdtsaveaddr};" \
"run manage_userdata; "
/* Enable PREBOOT variable */
+#define CONFIG_USE_PREBOOT
#define CONFIG_PREBOOT
/* Set ARP_TIMEOUT to 500ms */
"setcurs 1 10;lcdputs serverip; setcurs 10 10; lcdputs ${serverip};" \
"setenv stdout nc;setenv stdin nc;setenv stderr nc\0"
+#define CONFIG_USE_PREBOOT
#define CONFIG_PREBOOT "run cfgscr; run brdefaultip"
/* Network defines */
"echo WARNING: Could not determine dtb to use; fi; \0" \
BOOTENV
+#define CONFIG_USE_PREBOOT
#define CONFIG_PREBOOT "usb start;sf probe"
#define BOOT_TARGET_DEVICES(func) \
"upd_uboot=tftp 100000 conga/u-boot.rom;" \
"sf probe;sf update 100000 0 800000;saveenv\0"
+#define CONFIG_USE_PREBOOT
#define CONFIG_PREBOOT
#endif /* __CONFIG_H */
#define CONFIG_ROOTPATH "/opt/nfsroot"
#define CONFIG_BOOTFILE "ccdc.img"
+#define CONFIG_USE_PREBOOT
#define CONFIG_PREBOOT /* enable preboot variable */
#define CONFIG_EXTRA_ENV_SETTINGS \
"upd_uboot=usb reset;tftp 100000 dfi/u-boot.rom;" \
"sf probe;sf update 100000 0 800000;saveenv\0"
+#define CONFIG_USE_PREBOOT
#define CONFIG_PREBOOT
#endif /* __CONFIG_H */
/* Default Environment */
#define CONFIG_BOOTCOMMAND "sf read ${loadaddr} 0xd0000 0x700000; bootm"
#define CONFIG_LOADADDR 0x80000
+#define CONFIG_USE_PREBOOT
#undef CONFIG_PREBOOT /* override preboot for USB and SPI flash init */
#define CONFIG_PREBOOT "usb start; sf probe"
/* Miscellaneous configurable options */
#define CONFIG_HWCONFIG
+#define CONFIG_USE_PREBOOT
#define CONFIG_PREBOOT
/* Memory configuration */
#define CONFIG_ROOTPATH "/opt/nfsroot"
#define CONFIG_BOOTFILE "uImage"
+#define CONFIG_USE_PREBOOT
#define CONFIG_PREBOOT /* enable preboot variable */
#define CONFIG_EXTRA_ENV_SETTINGS \
#define CONFIG_SYS_LOAD_ADDR 0x100000
#define CONFIG_LOADS_ECHO
#define CONFIG_TIMESTAMP
+#define CONFIG_USE_PREBOOT
#define CONFIG_PREBOOT "echo;" \
"echo Type \\\"run nfsboot\\\" " \
"to mount root filesystem over NFS;echo"
/*
* Extra Environments
*/
+#define CONFIG_USE_PREBOOT
#define CONFIG_PREBOOT "run try_bootscript"
#define CONFIG_HOSTNAME "m53menlo"
#define CONFIG_REVISION_TAG
#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
+#define CONFIG_USE_PREBOOT
#define CONFIG_PREBOOT /* enable preboot variable */
/*
#ifdef CONFIG_USB_KEYBOARD
#define STDIN_CFG "usbkbd,serial"
+#define CONFIG_USE_PREBOOT
#define CONFIG_PREBOOT "usb start"
#else
#define STDIN_CFG "serial"
/* architecture dependent code */
#define CONFIG_SYS_USR_EXCEP /* user exception */
-#define CONFIG_PREBOOT "echo U-BOOT for ${hostname};setenv preboot;echo"
+#define CONFIG_USE_PREBOOT
+#define CONFIG_PREBOOT "echo U-BOOT for ${hostname};setenv preboot;echo"
#ifndef CONFIG_EXTRA_ENV_SETTINGS
#define CONFIG_EXTRA_ENV_SETTINGS "unlock=yes\0" \
#endif
/* auto boot */
+#define CONFIG_USE_PREBOOT
#define CONFIG_PREBOOT
/*
#define CONFIG_SYS_SDRAM_BASE 0x00000000
/* auto boot */
+#define CONFIG_USE_PREBOOT
#define CONFIG_PREBOOT
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, \
#define CONFIG_SYS_SDRAM_BASE 0x00000000
/* auto boot */
+#define CONFIG_USE_PREBOOT
#define CONFIG_PREBOOT
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, \
#define CONFIG_MXC_USB_FLAGS MXC_EHCI_POWER_PINS_ENABLED
/* Framebuffer and LCD */
+#define CONFIG_USE_PREBOOT
#define CONFIG_PREBOOT
#define CONFIG_VIDEO_BMP_RLE8
#define CONFIG_SPLASH_SCREEN
/* Framebuffer and LCD */
#define CONFIG_IMX_VIDEO_SKIP
+#define CONFIG_USE_PREBOOT
#define CONFIG_PREBOOT
#endif /* __CONFIG_H */
#endif
/* Framebuffer and LCD */
+#define CONFIG_USE_PREBOOT
#define CONFIG_PREBOOT
#define CONFIG_VIDEO_BMP_RLE8
#define CONFIG_SPLASH_SCREEN
#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
#define CONFIG_MXC_USB_FLAGS 0
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
+#define CONFIG_USE_PREBOOT
#define CONFIG_PREBOOT \
"if hdmidet; then " \
"usb start; " \
#define CONFIG_IMX_HDMI
#define CONFIG_IMX_VIDEO_SKIP
+#define CONFIG_USE_PREBOOT
#define CONFIG_PREBOOT ""
#ifdef CONFIG_CMD_MMC
"bootmenu_delay=30\0" \
""
+#define CONFIG_USE_PREBOOT
#define CONFIG_PREBOOT \
"setenv mmcnum 1; setenv mmcpart 1;" \
"setenv mmcscriptfile bootmenu.scr;" \
/* TWL4030 LED Support */
+#define CONFIG_USE_PREBOOT
#define CONFIG_PREBOOT "usb start"
#define MEM_LAYOUT_ENV_SETTINGS \
/* Environment information */
+#define CONFIG_USE_PREBOOT
#define CONFIG_PREBOOT \
"setenv preboot;" \
"saveenv;"
#define ACFG_CONSOLE_DEV ttymxc0
#define CONFIG_SYS_AUTOLOAD "no"
#define CONFIG_ROOTPATH "/tftpboot/" __stringify(CONFIG_BOARD_NAME) "-root"
+#define CONFIG_USE_PREBOOT
#define CONFIG_PREBOOT "run check_env"
#define CONFIG_BOOTCOMMAND "run emmcboot"
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
#endif
+#define CONFIG_USE_PREBOOT
#define CONFIG_PREBOOT ""
/* Thermal support */
#define CONFIG_BOOTCOMMAND "run bootubi_scr"
/* Miscellaneous configurable options */
+#define CONFIG_USE_PREBOOT
#define CONFIG_PREBOOT
/* MTD/UBI/UBIFS config */
#include <config_distro_bootcmd.h>
+#define CONFIG_USE_PREBOOT
#define CONFIG_PREBOOT "pci enum"
#define CONFIG_EXTRA_ENV_SETTINGS \
"fdt_high=0xffffffff\0" \
BOOTENV
#endif
+#define CONFIG_USE_PREBOOT
#define CONFIG_PREBOOT
#endif
#endif /* CONFIG_SPL_BUILD */
+#define CONFIG_USE_PREBOOT
#define CONFIG_PREBOOT
#endif
BOOTENV
#endif
+#define CONFIG_USE_PREBOOT
#define CONFIG_PREBOOT
#endif
BOOTENV
#endif
+#define CONFIG_USE_PREBOOT
#define CONFIG_PREBOOT
#endif
/* Environment */
#define CONFIG_ENV_SIZE SZ_16K
#define CONFIG_SYS_LOAD_ADDR 0x1000000
+#define CONFIG_USE_PREBOOT
#define CONFIG_PREBOOT "usb start"
/* Shell */
/* UBI Support */
/* Commen environment */
+#define CONFIG_USE_PREBOOT
#define CONFIG_PREBOOT
#define COMMON_ENV_DFU_ARGS "dfu_args=run bootargs_defaults;" \
"setenv bootargs ${bootargs};" \
/* Booting Linux */
#define CONFIG_BOOTFILE "fitImage"
+#define CONFIG_USE_PREBOOT
#define CONFIG_PREBOOT "run try_bootscript"
#define CONFIG_BOOTCOMMAND "run mmc_mmc"
#define CONFIG_LOADADDR 0x01000000
* if button B is not pressed, boot normal Linux system immediatelly
* if button B is pressed, wait $bootdelay and boot recovery system
*/
+#define CONFIG_USE_PREBOOT
#define CONFIG_PREBOOT \
"setenv hostname vining-${unit_serial} ; " \
"setenv PS1 \"${unit_ident} (${unit_serial}) => \" ; " \
#define CONFIG_LOADADDR 200000 /* default addr for tftp & bootm*/
+#define CONFIG_USE_PREBOOT
#define CONFIG_PREBOOT "echo;" \
"echo Welcome on the ABB Socrates Board;" \
"echo"
#define CONFIG_ROOTPATH "/opt/nfsroot"
#define CONFIG_BOOTFILE "uImage"
+#define CONFIG_USE_PREBOOT
#define CONFIG_PREBOOT /* enable preboot variable */
#define CONFIG_EXTRA_ENV_SETTINGS \
#endif
#ifdef CONFIG_USB_KEYBOARD
+#define CONFIG_USE_PREBOOT
#define CONFIG_PREBOOT
#endif
#define CONFIG_USBD_HS
#endif /* CONFIG_CMD_USB_MASS_STORAGE */
#ifdef CONFIG_USB_KEYBOARD
+#define CONFIG_USE_PREBOOT
#define CONFIG_PREBOOT \
"usb start; " \
"if hdmidet; then " \
#ifdef CONFIG_USB_KEYBOARD
#define STDIN_KBD_USB ",usbkbd"
+#define CONFIG_USE_PREBOOT
#define CONFIG_PREBOOT "usb start"
#else
#define STDIN_KBD_USB ""
#define CONFIG_SYS_MONITOR_LEN (1 << 20)
+#define CONFIG_USE_PREBOOT
#define CONFIG_PREBOOT
#define CONFIG_STD_DEVICES_SETTINGS "stdin=serial\0" \
#define PHY_ANEG_TIMEOUT 8000 /* PHY needs a longer aneg time */
+#define CONFIG_USE_PREBOOT
#define CONFIG_PREBOOT
/* Keep device tree and initrd in lower memory so the kernel can access them */
# define EXTRA_ENV_USB
#endif
+#define CONFIG_USE_PREBOOT
#undef CONFIG_PREBOOT
#undef CONFIG_EXTRA_ENV_SETTINGS
#define CONFIG_SYS_SDRAM_BASE 0x00000000
/* auto boot */
+#define CONFIG_USE_PREBOOT
#define CONFIG_PREBOOT
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, \
*/
#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */
#define CONFIG_LOADADDR 0x1000000 /* default location for tftp and bootm */
+#define CONFIG_USE_PREBOOT
#define CONFIG_PREBOOT /* enable preboot variable */
#define CONFIG_INTEGRITY /* support booting INTEGRITY OS */
*/
#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */
#define CONFIG_LOADADDR 0x1000000 /* default location for tftp and bootm */
+#define CONFIG_USE_PREBOOT
#define CONFIG_PREBOOT /* enable preboot variable */
#define CONFIG_INTEGRITY /* support booting INTEGRITY OS */
#define CONFIG_INTERRUPTS /* enable pci, srio, ddr interrupts */
*/
#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */
#define CONFIG_LOADADDR 0x1000000 /* default location for tftp and bootm */
+#define CONFIG_USE_PREBOOT
#define CONFIG_PREBOOT /* enable preboot variable */
#define CONFIG_INTEGRITY /* support booting INTEGRITY OS */
*/
#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */
#define CONFIG_LOADADDR 0x1000000 /* default location for tftp and bootm */
+#define CONFIG_USE_PREBOOT
#define CONFIG_PREBOOT /* enable preboot variable */
#define CONFIG_INTEGRITY /* support booting INTEGRITY OS */
#define CONFIG_SYS_MEMTEST_START (PHYS_SDRAM + (512*1024))
#define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM + PHYS_SDRAM_SIZE)
+#define CONFIG_USE_PREBOOT
#define CONFIG_PREBOOT ""
#define CONFIG_ENV_OVERWRITE
/* enable preboot to be loaded before CONFIG_BOOTDELAY */
+#define CONFIG_USE_PREBOOT
#define CONFIG_PREBOOT
/* Boot configuration */