drivers: net: Provide Kconfig menu for PHYLIB

Provide the necessary Kconfig symbols so that PHYLIB support may be
enabled in Kconfig, as opposed to needing to #define these symbols in
C source headers.

BITBANGMII and MV88E6352_SWITCH are left out of the PHYLIB submenu as
they don't seem to explicitly depend on it (i.e. they do not use the
phy_driver class).

Signed-off-by: Alexandru Gagniuc <alex.g@adaptrum.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 1d31e238b601f621270eed093fc397a6dfbb466b..078d5a84f13a80d4eec4ce4a727708a4af7e2a98 100644 (file)
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -1,3 +1,5 @@
+source "drivers/net/phy/Kconfig"
+
 config DM_ETH
        bool "Enable Driver Model for Ethernet drivers"
        depends on DM
@@ -8,32 +10,6 @@ config DM_ETH
          This is currently implemented in net/eth.c
          Look in include/net.h for details.
 
-config PHYLIB
-       bool "Ethernet PHY (physical media interface) support"
-       help
-         Enable Ethernet PHY (physical media interface) support.
-
-config RTL8211X_PHY_FORCE_MASTER
-       bool "Ethernet PHY RTL8211x: force 1000BASE-T master mode"
-       depends on PHYLIB
-       help
-         Force master mode for 1000BASE-T on RTl8211x PHYs (except for RTL8211F).
-         This can work around link stability and data corruption issues on gigabit
-         links which can occur in slave mode on certain PHYs, e.g. on the
-         RTL8211C(L).
-
-         Please note that two directly connected devices (i.e. via crossover cable)
-         will not be able to establish a link between each other if they both force
-         master mode. Multiple devices forcing master mode when connected by a
-         network switch do not pose a problem as the switch configures its affected
-         ports into slave mode.
-
-         This option only affects gigabit links. If you must establish a direct
-         connection between two devices which both force master mode, try forcing
-         the link speed to 100MBit/s.
-
-         If unsure, say N.
-
 menuconfig NETDEVICES
        bool "Network device support"
        depends on NET

diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
new file mode 100644 (file)
index 0000000..52529f2
--- /dev/null
+++ b/drivers/net/phy/Kconfig
@@ -0,0 +1,90 @@
+
+config BITBANGMII
+       bool "Bit-banged ethernet MII management channel support"
+
+config MV88E6352_SWITCH
+       bool "Marvell 88E6352 switch support"
+
+menuconfig PHYLIB
+       bool "Ethernet PHY (physical media interface) support"
+       help
+         Enable Ethernet PHY (physical media interface) support.
+
+if PHYLIB
+
+config MV88E61XX_SWITCH
+       bool "Marvel MV88E61xx Ethernet switch PHY support."
+
+config PHYLIB_10G
+       bool "Generic 10G PHY support"
+
+config PHY_AQUANTIA
+       bool "Aquantia Ethernet PHYs support"
+
+config PHY_ATHEROS
+       bool "Atheros Ethernet PHYs support"
+
+config PHY_BROADCOM
+       bool "Broadcom Ethernet PHYs support"
+
+config PHY_CORTINA
+       bool "Cortina Ethernet PHYs support"
+
+config PHY_DAVICOM
+       bool "Davicom Ethernet PHYs support"
+
+config PHY_ET1011C
+       bool "LSI TruePHY ET1011C support"
+
+config PHY_LXT
+       bool "LXT971 Ethernet PHY support"
+
+config PHY_MARVELL
+       bool "Marvell Ethernet PHYs support"
+
+config PHY_MICREL
+       bool "Micrel Ethernet PHYs support"
+
+config PHY_NATSEMI
+       bool "National Semiconductor Ethernet PHYs support"
+
+config PHY_REALTEK
+       bool "Realtek Ethernet PHYs support"
+
+config RTL8211X_PHY_FORCE_MASTER
+       bool "Ethernet PHY RTL8211x: force 1000BASE-T master mode"
+       depends on PHY_REALTEK
+       help
+         Force master mode for 1000BASE-T on RTl8211x PHYs (except for RTL8211F).
+         This can work around link stability and data corruption issues on gigabit
+         links which can occur in slave mode on certain PHYs, e.g. on the
+         RTL8211C(L).
+
+         Please note that two directly connected devices (i.e. via crossover cable)
+         will not be able to establish a link between each other if they both force
+         master mode. Multiple devices forcing master mode when connected by a
+         network switch do not pose a problem as the switch configures its affected
+         ports into slave mode.
+
+         This option only affects gigabit links. If you must establish a direct
+         connection between two devices which both force master mode, try forcing
+         the link speed to 100MBit/s.
+
+         If unsure, say N.
+
+config PHY_SMSC
+       bool  "Microchip(SMSC) Ethernet PHYs support"
+
+config PHY_TERANETICS
+       bool "Teranetics Ethernet PHYs support"
+
+config PHY_TI
+       bool "Texas Instruments Ethernet PHYs support"
+
+config PHY_VITESSE
+       bool "Vitesse Ethernet PHYs support"
+
+config PHY_XILINX
+       bool "Xilinx Ethernet PHYs support"
+
+endif #PHYLIB