powerpc/p1022ds: add support for SPI and SD boot

Add TLB mappings, board target options, and configuration items
need for SPI/SD boot.

Since P1022DS RevB board, the NOR flash have been changed to 16 bit/28bit
address flash, therefore, when SDHC/ESPI booting and access to eLBC,
the PMUXCR[0~1] must be set to 10b, and PMUXCR[9~10] must be set to
00b for them.

Configure the PX_BRDCFG0[0~1] to 10b which is connected to
SPI devices as SPI_CS(0:3)_B.

Signed-off-by: Matthew McClintock <msm@freescale.com>
Signed-off-by: Jerry Huang <Chang-Ming.Huang@freescale.com>
Signed-off-by: Jiang Yutang <b14898@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>

diff --git a/board/freescale/p1022ds/p1022ds.c b/board/freescale/p1022ds/p1022ds.c
index 56dfcce41089863d08ec1cb2cd912c674e0b6ab3..25fdc2a740c033f236825ac203f171f5b51c8bc9 100644 (file)
--- a/board/freescale/p1022ds/p1022ds.c
+++ b/board/freescale/p1022ds/p1022ds.c
@@ -39,6 +39,10 @@ int board_early_init_f(void)
 
        /* Set pmuxcr to allow both i2c1 and i2c2 */
        setbits_be32(&gur->pmuxcr, 0x1000);
+#ifdef CONFIG_SYS_RAMBOOT
+       setbits_be32(&gur->pmuxcr,
+               in_be32(&gur->pmuxcr) | MPC85xx_PMUXCR_SD_DATA);
+#endif
 
        /* Read back the register to synchronize the write. */
        in_be32(&gur->pmuxcr);

diff --git a/board/freescale/p1022ds/tlb.c b/board/freescale/p1022ds/tlb.c
index e6201127a934d9ecefe9be7e5edb342dacd2eb22..71e71f70703961d47ecce6ddc3baa055300df15a 100644 (file)
--- a/board/freescale/p1022ds/tlb.c
+++ b/board/freescale/p1022ds/tlb.c
@@ -71,6 +71,20 @@ struct fsl_e_tlb_entry tlb_table[] = {
        SET_TLB_ENTRY(1, PIXIS_BASE, PIXIS_BASE_PHYS,
                      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
                      0, 7, BOOKE_PAGESZ_4K, 1),
+
+#ifdef CONFIG_SYS_RAMBOOT
+       /* *I*G - eSDHC/eSPI/NAND boot */
+       SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE,
+                       MAS3_SX|MAS3_SW|MAS3_SR, 0,
+                       0, 8, BOOKE_PAGESZ_1G, 1),
+
+       /* map the second 1G */
+       SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE + 0x40000000,
+                       CONFIG_SYS_DDR_SDRAM_BASE + 0x40000000,
+                       MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+                       0, 9, BOOKE_PAGESZ_1G, 1),
+#endif
+#
 };
 
 int num_tlb_entries = ARRAY_SIZE(tlb_table);

diff --git a/boards.cfg b/boards.cfg
index 1af87c0f0c3dbc5b58383cd6cccb8c674e033c21..05987632f455d513ccd90cff6531c01614713ce6 100644 (file)
--- a/boards.cfg
+++ b/boards.cfg
@@ -731,6 +731,10 @@ P1021RDB-PC_NAND             powerpc     mpc85xx     p1_p2_rdb_pc        freesca
 P1021RDB-PC_SDCARD           powerpc     mpc85xx     p1_p2_rdb_pc        freescale      -           p1_p2_rdb_pc:P1021RDB,SDCARD
 P1021RDB-PC_SPIFLASH         powerpc     mpc85xx     p1_p2_rdb_pc        freescale      -           p1_p2_rdb_pc:P1021RDB,SPIFLASH
 P1022DS                      powerpc     mpc85xx     p1022ds             freescale
+P1022DS_SPIFLASH             powerpc     mpc85xx     p1022ds             freescale     -           P1022DS:SPIFLASH
+P1022DS_36BIT_SPIFLASH       powerpc     mpc85xx     p1022ds             freescale     -           P1022DS:36BIT,SPIFLASH
+P1022DS_SDCARD               powerpc     mpc85xx     p1022ds             freescale     -           P1022DS:SDCARD
+P1022DS_36BIT_SDCARD         powerpc     mpc85xx     p1022ds             freescale     -           P1022DS:36BIT,SDCARD
 P1022DS_36BIT                powerpc     mpc85xx     p1022ds             freescale      -           P1022DS:36BIT
 P1023RDS                     powerpc     mpc85xx     p1023rds            freescale      -           P1023RDS
 P1023RDS_NAND                powerpc     mpc85xx     p1023rds            freescale      -           P1023RDS:NAND

diff --git a/include/configs/P1022DS.h b/include/configs/P1022DS.h
index 50d3f8d703550e44ed407e9b4f6ebcae70c546b0..86217a46dbcfa8c6459350f27e09a3f73bcf0645 100644 (file)
--- a/include/configs/P1022DS.h
+++ b/include/configs/P1022DS.h
@@ -18,6 +18,22 @@
 #define CONFIG_PHYS_64BIT
 #endif
 
+#ifdef CONFIG_SDCARD
+#define CONFIG_RAMBOOT_SDCARD
+#define CONFIG_SYS_RAMBOOT
+#define CONFIG_SYS_EXTRA_ENV_RELOC
+#define CONFIG_SYS_TEXT_BASE           0x11000000
+#define CONFIG_RESET_VECTOR_ADDRESS    0x1107fffc
+#endif
+
+#ifdef CONFIG_SPIFLASH
+#define CONFIG_RAMBOOT_SPIFLASH
+#define CONFIG_SYS_RAMBOOT
+#define CONFIG_SYS_EXTRA_ENV_RELOC
+#define CONFIG_SYS_TEXT_BASE           0x11000000
+#define CONFIG_RESET_VECTOR_ADDRESS    0x1107fffc
+#endif
+
 /* High Level Configuration Options */
 #define CONFIG_BOOKE                   /* BOOKE */
 #define CONFIG_E500                    /* BOOKE e500 family */
@@ -402,11 +418,40 @@
 /*
  * Environment
  */
+#ifdef CONFIG_SYS_RAMBOOT
+#ifdef CONFIG_RAMBOOT_SPIFLASH
+#define CONFIG_ENV_IS_IN_SPI_FLASH
+#define CONFIG_ENV_SPI_BUS     0
+#define CONFIG_ENV_SPI_CS      0
+#define CONFIG_ENV_SPI_MAX_HZ  10000000
+#define CONFIG_ENV_SPI_MODE    0
+#define CONFIG_ENV_SIZE                0x2000  /* 8KB */
+#define CONFIG_ENV_OFFSET      0x100000        /* 1MB */
+#define CONFIG_ENV_SECT_SIZE   0x10000
+#elif defined(CONFIG_RAMBOOT_SDCARD)
+#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_ENV_SIZE                0x2000
+#define CONFIG_SYS_MMC_ENV_DEV 0
+#elif defined(CONFIG_NAND_U_BOOT)
+#define CONFIG_ENV_IS_IN_NAND
+#define CONFIG_ENV_SIZE                CONFIG_SYS_NAND_BLOCK_SIZE
+#define CONFIG_ENV_OFFSET      ((512 * 1024) + CONFIG_SYS_NAND_BLOCK_SIZE)
+#define CONFIG_ENV_RANGE       (3 * CONFIG_ENV_SIZE)
+#else
+#define CONFIG_ENV_IS_NOWHERE  /* Store ENV in memory only */
+#define CONFIG_ENV_ADDR                (CONFIG_SYS_MONITOR_BASE - 0x1000)
+#define CONFIG_ENV_SIZE                0x2000
+#endif
+#else
 #define CONFIG_ENV_IS_IN_FLASH
-#define CONFIG_ENV_OVERWRITE
-#define CONFIG_ENV_ADDR                (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
+#if CONFIG_SYS_MONITOR_BASE > 0xfff80000
+#define CONFIG_ENV_ADDR        0xfff80000
+#else
+#define CONFIG_ENV_ADDR        (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
+#endif
 #define CONFIG_ENV_SIZE                0x2000
-#define CONFIG_ENV_SECT_SIZE   0x20000
+#define CONFIG_ENV_SECT_SIZE   0x20000 /* 128K (one sector) */
+#endif
 
 #define CONFIG_LOADS_ECHO
 #define CONFIG_SYS_LOADS_BAUD_CHANGE