config TARGET_QEMU_VIRT
bool "Support QEMU Virt Board"
-config TARGET_SIFIVE_FU540
- bool "Support SiFive FU540 Board"
+config TARGET_SIFIVE_UNLEASHED
+ bool "Support SiFive Unleashed Board"
config TARGET_SIPEED_MAIX
bool "Support Sipeed Maix Board"
source "board/AndesTech/ax25-ae350/Kconfig"
source "board/emulation/qemu-riscv/Kconfig"
source "board/microchip/mpfs_icicle/Kconfig"
-source "board/sifive/fu540/Kconfig"
+source "board/sifive/unleashed/Kconfig"
source "board/sipeed/maix/Kconfig"
# platform-specific options below
# SPDX-License-Identifier: GPL-2.0+
dtb-$(CONFIG_TARGET_AX25_AE350) += ae350_32.dtb ae350_64.dtb
-dtb-$(CONFIG_TARGET_SIFIVE_FU540) += hifive-unleashed-a00.dtb
+dtb-$(CONFIG_TARGET_SIFIVE_UNLEASHED) += hifive-unleashed-a00.dtb
dtb-$(CONFIG_TARGET_SIPEED_MAIX) += k210-maix-bit.dtb
dtb-$(CONFIG_TARGET_MICROCHIP_ICICLE) += microchip-mpfs-icicle-kit.dtb
-if TARGET_SIFIVE_FU540
+if TARGET_SIFIVE_UNLEASHED
config SYS_BOARD
- default "fu540"
+ default "unleashed"
config SYS_VENDOR
default "sifive"
default "fu540"
config SYS_CONFIG_NAME
- default "sifive-fu540"
+ default "sifive-unleashed"
config SYS_TEXT_BASE
default 0x80200000 if SPL
-SiFive FU540 BOARD
+SiFive HiFive Unleashed BOARD
M: Paul Walmsley <paul.walmsley@sifive.com>
M: Palmer Dabbelt <palmer@dabbelt.com>
M: Anup Patel <anup.patel@wdc.com>
M: Atish Patra <atish.patra@wdc.com>
S: Maintained
-F: board/sifive/fu540/
-F: doc/board/sifive/fu540.rst
-F: include/configs/sifive-fu540.h
-F: configs/sifive_fu540_defconfig
+F: board/sifive/unleashed/
+F: doc/board/sifive/unleashed.rst
+F: include/configs/sifive-unleashed.h
+F: configs/sifive_unleashed_defconfig
#
# Copyright (c) 2019 Western Digital Corporation or its affiliates.
-obj-y += fu540.o
+obj-y += unleashed.o
ifdef CONFIG_SPL_BUILD
obj-y += spl.o
ARCH_MX6 || ARCH_MX7 || \
ARCH_ROCKCHIP || ARCH_MVEBU || ARCH_SOCFPGA || \
ARCH_AT91 || ARCH_ZYNQ || ARCH_KEYSTONE || OMAP34XX || \
- OMAP44XX || OMAP54XX || AM33XX || AM43XX || TARGET_SIFIVE_FU540
+ OMAP44XX || OMAP54XX || AM33XX || AM43XX || \
+ TARGET_SIFIVE_UNLEASHED
help
Use sector number for specifying U-Boot location on MMC/SD in
raw mode.
default 0x300 if ARCH_ZYNQ || ARCH_KEYSTONE || OMAP34XX || OMAP44XX || \
OMAP54XX || AM33XX || AM43XX || ARCH_K3
default 0x4000 if ARCH_ROCKCHIP
- default 0x822 if TARGET_SIFIVE_FU540
+ default 0x822 if TARGET_SIFIVE_UNLEASHED
help
Address on the MMC to load U-Boot from, when the MMC is being used
in raw mode. Units: MMC sectors (1 sector = 512 bytes).
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_DEFAULT_DEVICE_TREE="hifive-unleashed-a00"
-CONFIG_TARGET_SIFIVE_FU540=y
+CONFIG_TARGET_SIFIVE_UNLEASHED=y
CONFIG_ARCH_RV64I=y
CONFIG_RISCV_SMODE=y
CONFIG_DISTRO_DEFAULTS=y
.. toctree::
:maxdepth: 2
- fu540
+ unleashed
config SIFIVE_FU540_DDR
bool "SiFive FU540 DDR driver"
depends on RAM_SIFIVE
- default y if TARGET_SIFIVE_FU540
+ default y if TARGET_SIFIVE_UNLEASHED
help
This enables DDR support for the platforms based on SiFive FU540 SoC.
config RESET_SIFIVE
bool "Reset Driver for SiFive SoC's"
- depends on DM_RESET && CLK_SIFIVE_FU540_PRCI && TARGET_SIFIVE_FU540
+ depends on DM_RESET && CLK_SIFIVE_FU540_PRCI && TARGET_SIFIVE_UNLEASHED
default y
help
PRCI module within SiFive SoC's provides mechanism to reset