* Fix dbau1x00 Board

  - Fix dbau1x00 boards broken by dbau1550 patch
    PLL:s were not set for boards other than 1550.
    Flash CFI caused card to hang due to undefined CFG_FLASH_BANKS_LIST.
    Default boot is now bootp for cards other than 1550.
  Patch by Thomas Lange Aug 10 2005

diff --git a/CHANGELOG b/CHANGELOG
index 216cb633f75da113b3f96169c85aead7b33063b8..e006f0e9d0c606e76a70ae08b3e6c85b5ce64896 100644 (file)
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -1,6 +1,12 @@
 ======================================================================
 Changes since U-Boot 1.1.4:
 ======================================================================
+* Fix dbau1x00 Board
+  - Fix dbau1x00 boards broken by dbau1550 patch
+    PLL:s were not set for boards other than 1550.
+    Flash CFI caused card to hang due to undefined CFG_FLASH_BANKS_LIST.
+    Default boot is now bootp for cards other than 1550.
+  Patch by Thomas Lange Aug 10 2005
 
 * Fixes common/cmd_flash.c:
 

diff --git a/board/dbau1x00/lowlevel_init.S b/board/dbau1x00/lowlevel_init.S
index 7afd5840c8628a6925e0067035ea2d6c79d15656..14a78465f3659a0420bc18e42c3a5b85e2243315 100644 (file)
--- a/board/dbau1x00/lowlevel_init.S
+++ b/board/dbau1x00/lowlevel_init.S
@@ -185,6 +185,8 @@ tlbloop:
        bne     t0, t2, tlbloop
        nop
 
+#endif /* CONFIG_DBAU1550 */
+
        /* First setup pll:s to make serial work ok */
        /* We have a 12 MHz crystal */
        li      t0, SYS_CPUPLL
@@ -205,6 +207,7 @@ tlbloop:
        sw      t1, 0(t0) /* aux pll */
        sync
 
+#ifdef CONFIG_DBAU1550
        /*  Static memory controller */
        /* RCE0 - can not change while fetching, do so from icache */
        move            t2, ra /* Store return address */
@@ -237,7 +240,7 @@ noCacheJump:
        sw      t1, 0(t0)
 #else /* CONFIG_DBAU1550 */
        li      t0, MEM_STTIME0
-       li      t1, 0x00014C0F
+       li      t1, 0x040181D7
        sw      t1, 0(t0)
 
        /* RCE0 AMD 29LV640M MirrorBit Flash */

diff --git a/include/configs/dbau1x00.h b/include/configs/dbau1x00.h
index 0a10e3c75b4c0bdd6c5d9c97afaa95f880c455fd..4cc5085293b430d0187b1856ba205a4f62327811 100644 (file)
--- a/include/configs/dbau1x00.h
+++ b/include/configs/dbau1x00.h
@@ -81,8 +81,7 @@
                                   CFG_CMD_MII | CFG_CMD_RUN | CFG_CMD_BDI | CFG_CMD_BEDBUG | \
                                   CFG_CMD_NFS | CFG_CMD_ELF | CFG_CMD_PCMCIA | CFG_CMD_I2C))
 #else /* CONFIG_DBAU1550 */
-/* Boot from Compact flash partition 2 as default */
-#define CONFIG_BOOTCOMMAND     "ide reset;disk 0x81000000 0:2;bootm"
+#define CONFIG_BOOTCOMMAND     "bootp;bootm"
 
 #define CONFIG_COMMANDS                ((CONFIG_CMD_DFL | CFG_CMD_IDE | CFG_CMD_DHCP | CFG_CMD_ELF) & \
                                 ~(CFG_CMD_ENV | CFG_CMD_FAT | CFG_CMD_FLASH | CFG_CMD_FPGA | \
@@ -133,8 +132,6 @@
 #define PHYS_FLASH_1           0xb8000000 /* Flash Bank #1 */
 #define PHYS_FLASH_2           0xbc000000 /* Flash Bank #2 */
 
-#define CFG_FLASH_BANKS_LIST {PHYS_FLASH_1, PHYS_FLASH_2}
-
 #else /* CONFIG_DBAU1550 */
 
 #define CFG_MAX_FLASH_BANKS    2       /* max number of memory banks */
@@ -145,6 +142,8 @@
 
 #endif /* CONFIG_DBAU1550 */
 
+#define CFG_FLASH_BANKS_LIST {PHYS_FLASH_1, PHYS_FLASH_2}
+
 #define CFG_FLASH_CFI           1
 #define CFG_FLASH_CFI_DRIVER    1