LIBS += rtc/librtc.a
LIBS += dtt/libdtt.a
LIBS += drivers/libdrivers.a
+LIBS += drivers/nand/libnand.a
LIBS += drivers/sk98lin/libsk98lin.a
LIBS += post/libpost.a post/cpu/libcpu.a
LIBS += common/libcommon.a
mx1fs2_config : unconfig
@./mkconfig $(@:_config=) arm arm920t mx1fs2 NULL imx
+netstar_32_config \
+netstar_config: unconfig
+ @if [ "$(findstring _32_,$@)" ] ; then \
+ echo "... 32MB SDRAM" ; \
+ echo "#define PHYS_SDRAM_1_SIZE SZ_32M" >>include/config.h ; \
+ else \
+ echo "... 64MB SDRAM" ; \
+ echo "#define PHYS_SDRAM_1_SIZE SZ_64M" >>include/config.h ; \
+ fi
+ @./mkconfig -a netstar arm arm925t netstar
+
omap1510inn_config : unconfig
@./mkconfig $(@:_config=) arm arm925t omap1510inn
--- /dev/null
+#
+# (C) Copyright 2005
+# Ladislav Michl, 2N Telekomunikace, michl@2n.cz
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = lib$(BOARD).a
+
+OBJS := netstar.o flash.o nand.o
+SOBJS := setup.o crcek.o
+
+gcclibdir := $(shell dirname `$(CC) -print-libgcc-file-name`)
+
+LOAD_ADDR = 0x10400000
+LDSCRIPT = $(TOPDIR)/board/$(BOARDDIR)/eeprom.lds
+
+HOST_CFLAGS = -Wall -pedantic -I$(TOPDIR)/include
+
+all: $(LIB) eeprom.srec eeprom.bin crcek.srec crcek.bin crcit
+
+$(LIB): $(OBJS) $(SOBJS)
+ $(AR) crv $@ $^
+
+eeprom.srec: eeprom.o eeprom_start.o
+ $(LD) -T $(LDSCRIPT) -g -Ttext $(LOAD_ADDR) \
+ -o $(<:.o=) -e $(<:.o=) $^ \
+ -L../../examples -lstubs \
+ -L../../lib_generic -lgeneric \
+ -L$(gcclibdir) -lgcc
+ $(OBJCOPY) -O srec $(<:.o=) $@
+
+eeprom.bin: eeprom.srec
+ $(OBJCOPY) -I srec -O binary $< $@ 2>/dev/null
+
+crcek.srec: crcek.o
+ $(LD) -g -Ttext 0x00000000 \
+ -o $(<:.o=) -e $(<:.o=) $^
+ $(OBJCOPY) -O srec $(<:.o=) $@
+
+crcek.bin: crcek.srec
+ $(OBJCOPY) -I srec -O binary $< $@ 2>/dev/null
+
+crcit: crcit.o crc32.o
+ $(HOSTCC) $(HOST_CFLAGS) -o $@ $^
+
+crcit.o: crcit.c
+ $(HOSTCC) $(HOST_CFLAGS) -c $<
+
+crc32.o: $(TOPDIR)/tools/crc32.c
+ $(HOSTCC) $(HOST_CFLAGS) -DUSE_HOSTCC -c $<
+
+clean:
+ rm -f $(SOBJS) $(OBJS) eeprom eeprom.srec eeprom.bin \
+ crcek crcek.srec crcek.bin
+
+distclean: clean
+ rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+ $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+-include .depend
+
+#########################################################################
--- /dev/null
+#
+# Linux-Kernel is expected to be at 1000'8000,
+# entry 1000'8000 (mem base + reserved)
+#
+# We load ourself to internal RAM at 2001'2000
+# Check map file when changing TEXT_BASE.
+# Everything has fit into 192kB internal SRAM!
+#
+
+# XXX TEXT_BASE = 0x20012000
+TEXT_BASE = 0x13FC0000
--- /dev/null
+/**
+ * (C) Copyright 2005
+ * 2N Telekomunikace, Ladislav Michl <michl@2n.cz>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2.
+ *
+ * Image layout looks like following:
+ * u32 - size
+ * u32 - version
+ * ... - data
+ * u32 - crc32
+ */
+
+#include "crcek.h"
+
+/**
+ * do_crc32 - calculate CRC32 of given buffer
+ * r0 - crc
+ * r1 - pointer to buffer
+ * r2 - buffer len
+ */
+ .macro do_crc32
+ ldr r5, FFFFFFFF
+ eor r0, r0, r5
+ adr r3, CRC32_TABLE
+1:
+ ldrb r4, [r1], #1
+ eor r4, r4, r0
+ and r4, r4, #0xff
+ ldr r4, [r3, r4, lsl#2]
+ eor r0, r4, r0, lsr#8
+ subs r2, r2, #0x1
+ bne 1b
+ eor r0, r0, r5
+ .endm
+
+ .macro crcuj, offset, size
+ mov r0, #0
+ ldr r1, \offset
+ ldr r2, [r1]
+ cmp r2, r0 @ no data, no problem
+ beq 2f
+ tst r2, #3 @ unaligned size
+ bne 2f
+ ldr r3, \size
+ cmp r2, r3 @ bogus size
+ bhi 2f
+ add r1, r1, #4
+ do_crc32
+ ldr r1, [r1]
+2:
+ cmp r0, r1
+ .endm
+
+ .macro wait, reg
+ mov \reg, #0x1000
+3:
+ subs \reg, \reg, #0x1
+ bne 3b
+
+ .endm
+.text
+.globl crcek
+crcek:
+ b crc2_bad
+ mov r6, #0
+ crcuj _LOADER1_OFFSET, _LOADER_SIZE
+ bne crc1_bad
+ orr r6, r6, #1
+crc1_bad:
+ crcuj _LOADER2_OFFSET, _LOADER_SIZE
+ bne crc2_bad
+ orr r6, r6, #2
+crc2_bad:
+ ldr r3, _LOADER1_OFFSET
+ ldr r4, _LOADER2_OFFSET
+ b boot_2nd
+ tst r6, #3
+ beq one_is_bad @ one of them (or both) has bad crc
+ ldr r1, [r3, #4]
+ ldr r2, [r4, #4]
+ cmp r1, r2 @ boot 2nd loader if versions differ
+ beq boot_1st
+ b boot_2nd
+one_is_bad:
+ tst r6, #1
+ bne boot_1st
+ tst r6, #2
+ bne boot_2nd
+@ We are doomed, so let user know.
+ ldr r0, GPIO_BASE @ configure GPIO pins
+ ldr r1, GPIO_DIRECTION
+ strh r1, [r0, #0x08]
+blink_loop:
+ mov r1, #0x08
+ strh r1, [r0, #0x04]
+ wait r3
+ mov r1, #0x10
+ strh r1, [r0, #0x04]
+ wait r3
+ b blink_loop
+boot_1st:
+ add pc, r3, #8
+boot_2nd:
+ add pc, r4, #8
+
+_LOADER_SIZE:
+ .word LOADER_SIZE - 8 @ minus size and crc32
+_LOADER1_OFFSET:
+ .word LOADER1_OFFSET
+_LOADER2_OFFSET:
+ .word LOADER2_OFFSET
+
+FFFFFFFF:
+ .word 0xffffffff
+CRC32_TABLE:
+ .word 0x00000000, 0x77073096, 0xee0e612c, 0x990951ba, 0x076dc419
+ .word 0x706af48f, 0xe963a535, 0x9e6495a3, 0x0edb8832, 0x79dcb8a4
+ .word 0xe0d5e91e, 0x97d2d988, 0x09b64c2b, 0x7eb17cbd, 0xe7b82d07
+ .word 0x90bf1d91, 0x1db71064, 0x6ab020f2, 0xf3b97148, 0x84be41de
+ .word 0x1adad47d, 0x6ddde4eb, 0xf4d4b551, 0x83d385c7, 0x136c9856
+ .word 0x646ba8c0, 0xfd62f97a, 0x8a65c9ec, 0x14015c4f, 0x63066cd9
+ .word 0xfa0f3d63, 0x8d080df5, 0x3b6e20c8, 0x4c69105e, 0xd56041e4
+ .word 0xa2677172, 0x3c03e4d1, 0x4b04d447, 0xd20d85fd, 0xa50ab56b
+ .word 0x35b5a8fa, 0x42b2986c, 0xdbbbc9d6, 0xacbcf940, 0x32d86ce3
+ .word 0x45df5c75, 0xdcd60dcf, 0xabd13d59, 0x26d930ac, 0x51de003a
+ .word 0xc8d75180, 0xbfd06116, 0x21b4f4b5, 0x56b3c423, 0xcfba9599
+ .word 0xb8bda50f, 0x2802b89e, 0x5f058808, 0xc60cd9b2, 0xb10be924
+ .word 0x2f6f7c87, 0x58684c11, 0xc1611dab, 0xb6662d3d, 0x76dc4190
+ .word 0x01db7106, 0x98d220bc, 0xefd5102a, 0x71b18589, 0x06b6b51f
+ .word 0x9fbfe4a5, 0xe8b8d433, 0x7807c9a2, 0x0f00f934, 0x9609a88e
+ .word 0xe10e9818, 0x7f6a0dbb, 0x086d3d2d, 0x91646c97, 0xe6635c01
+ .word 0x6b6b51f4, 0x1c6c6162, 0x856530d8, 0xf262004e, 0x6c0695ed
+ .word 0x1b01a57b, 0x8208f4c1, 0xf50fc457, 0x65b0d9c6, 0x12b7e950
+ .word 0x8bbeb8ea, 0xfcb9887c, 0x62dd1ddf, 0x15da2d49, 0x8cd37cf3
+ .word 0xfbd44c65, 0x4db26158, 0x3ab551ce, 0xa3bc0074, 0xd4bb30e2
+ .word 0x4adfa541, 0x3dd895d7, 0xa4d1c46d, 0xd3d6f4fb, 0x4369e96a
+ .word 0x346ed9fc, 0xad678846, 0xda60b8d0, 0x44042d73, 0x33031de5
+ .word 0xaa0a4c5f, 0xdd0d7cc9, 0x5005713c, 0x270241aa, 0xbe0b1010
+ .word 0xc90c2086, 0x5768b525, 0x206f85b3, 0xb966d409, 0xce61e49f
+ .word 0x5edef90e, 0x29d9c998, 0xb0d09822, 0xc7d7a8b4, 0x59b33d17
+ .word 0x2eb40d81, 0xb7bd5c3b, 0xc0ba6cad, 0xedb88320, 0x9abfb3b6
+ .word 0x03b6e20c, 0x74b1d29a, 0xead54739, 0x9dd277af, 0x04db2615
+ .word 0x73dc1683, 0xe3630b12, 0x94643b84, 0x0d6d6a3e, 0x7a6a5aa8
+ .word 0xe40ecf0b, 0x9309ff9d, 0x0a00ae27, 0x7d079eb1, 0xf00f9344
+ .word 0x8708a3d2, 0x1e01f268, 0x6906c2fe, 0xf762575d, 0x806567cb
+ .word 0x196c3671, 0x6e6b06e7, 0xfed41b76, 0x89d32be0, 0x10da7a5a
+ .word 0x67dd4acc, 0xf9b9df6f, 0x8ebeeff9, 0x17b7be43, 0x60b08ed5
+ .word 0xd6d6a3e8, 0xa1d1937e, 0x38d8c2c4, 0x4fdff252, 0xd1bb67f1
+ .word 0xa6bc5767, 0x3fb506dd, 0x48b2364b, 0xd80d2bda, 0xaf0a1b4c
+ .word 0x36034af6, 0x41047a60, 0xdf60efc3, 0xa867df55, 0x316e8eef
+ .word 0x4669be79, 0xcb61b38c, 0xbc66831a, 0x256fd2a0, 0x5268e236
+ .word 0xcc0c7795, 0xbb0b4703, 0x220216b9, 0x5505262f, 0xc5ba3bbe
+ .word 0xb2bd0b28, 0x2bb45a92, 0x5cb36a04, 0xc2d7ffa7, 0xb5d0cf31
+ .word 0x2cd99e8b, 0x5bdeae1d, 0x9b64c2b0, 0xec63f226, 0x756aa39c
+ .word 0x026d930a, 0x9c0906a9, 0xeb0e363f, 0x72076785, 0x05005713
+ .word 0x95bf4a82, 0xe2b87a14, 0x7bb12bae, 0x0cb61b38, 0x92d28e9b
+ .word 0xe5d5be0d, 0x7cdcefb7, 0x0bdbdf21, 0x86d3d2d4, 0xf1d4e242
+ .word 0x68ddb3f8, 0x1fda836e, 0x81be16cd, 0xf6b9265b, 0x6fb077e1
+ .word 0x18b74777, 0x88085ae6, 0xff0f6a70, 0x66063bca, 0x11010b5c
+ .word 0x8f659eff, 0xf862ae69, 0x616bffd3, 0x166ccf45, 0xa00ae278
+ .word 0xd70dd2ee, 0x4e048354, 0x3903b3c2, 0xa7672661, 0xd06016f7
+ .word 0x4969474d, 0x3e6e77db, 0xaed16a4a, 0xd9d65adc, 0x40df0b66
+ .word 0x37d83bf0, 0xa9bcae53, 0xdebb9ec5, 0x47b2cf7f, 0x30b5ffe9
+ .word 0xbdbdf21c, 0xcabac28a, 0x53b39330, 0x24b4a3a6, 0xbad03605
+ .word 0xcdd70693, 0x54de5729, 0x23d967bf, 0xb3667a2e, 0xc4614ab8
+ .word 0x5d681b02, 0x2a6f2b94, 0xb40bbe37, 0xc30c8ea1, 0x5a05df1b
+ .word 0x2d02ef8d
+
+GPIO_BASE:
+ .word 0xfffce000
+GPIO_DIRECTION:
+ .word 0x0000ffe7
+
+.end
--- /dev/null
+#define LOADER_SIZE (448 * 1024)
+#define LOADER1_OFFSET (128 * 1024)
+#define LOADER2_OFFSET (LOADER1_OFFSET + LOADER_SIZE)
--- /dev/null
+/*
+ * (C) Copyright 2005
+ * 2N Telekomunikace, Ladislav Michl <michl@2n.cz>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <stdint.h>
+#include <fcntl.h>
+#include <string.h>
+#include <unistd.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include "crcek.h"
+
+extern unsigned long crc32(unsigned long, const unsigned char *, unsigned int);
+
+uint32_t data[LOADER_SIZE/4 + 3];
+
+int doit(char *path, unsigned version)
+{
+ uint32_t *p;
+ ssize_t size;
+ int fd;
+
+ fd = open(path, O_RDONLY);
+ if (fd == -1) {
+ perror("Error opening file");
+ return EXIT_FAILURE;
+ }
+ p = data + 2;
+ size = read(fd, p, LOADER_SIZE + 4);
+ if (size == -1) {
+ perror("Error reading file");
+ return EXIT_FAILURE;
+ }
+ if (size > LOADER_SIZE) {
+ fprintf(stderr, "File too large\n");
+ return EXIT_FAILURE;
+ }
+ size = (((size - 1) >> 2) + 1) << 2;
+ data[0] = size + 4; /* add size of version field */
+ data[1] = version;
+ data[(size >> 2) + 2] = crc32(0, (unsigned char *)(data + 1), data[0]);
+ close(fd);
+
+ if (write(STDOUT_FILENO, data, size + 3*4) == -1) {
+ perror("Error writing file");
+ return EXIT_FAILURE;
+ }
+
+ return EXIT_SUCCESS;
+}
+
+int main(int argc, char **argv)
+{
+ if (argc == 2) {
+ return doit(argv[1], 0);
+ } else if ((argc == 4) && (strcmp(argv[1], "-v") == 0)) {
+ char *endptr, *nptr = argv[2];
+ unsigned ver = strtoul(nptr, &endptr, 0);
+ if (nptr != '\0' && endptr == '\0')
+ return doit(argv[3], ver);
+ }
+ fprintf(stderr, "Usage: crcit [-v version] <image>\n");
+
+ return EXIT_FAILURE;
+}
--- /dev/null
+/*
+ * (C) Copyright 2005
+ * Ladislav Michl, 2N Telekomunikace, michl@2n.cz
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * Some code shamelessly stolen back from Robin Getz.
+ */
+
+#define DEBUG
+
+#include <common.h>
+#include <exports.h>
+#include "../drivers/smc91111.h"
+
+#define SMC_BASE_ADDRESS CONFIG_SMC91111_BASE
+
+static u16 read_eeprom_reg(u16 reg)
+{
+ int timeout;
+
+ SMC_SELECT_BANK(2);
+ SMC_outw(reg, PTR_REG);
+
+ SMC_SELECT_BANK(1);
+ SMC_outw(SMC_inw (CTL_REG) | CTL_EEPROM_SELECT | CTL_RELOAD,
+ CTL_REG);
+ timeout = 100;
+ while((SMC_inw (CTL_REG) & CTL_RELOAD) && --timeout)
+ udelay(100);
+ if (timeout == 0) {
+ printf("Timeout Reading EEPROM register %02x\n", reg);
+ return 0;
+ }
+
+ return SMC_inw (GP_REG);
+}
+
+static int write_eeprom_reg(u16 value, u16 reg)
+{
+ int timeout;
+
+ SMC_SELECT_BANK(2);
+ SMC_outw(reg, PTR_REG);
+
+ SMC_SELECT_BANK(1);
+ SMC_outw(value, GP_REG);
+ SMC_outw(SMC_inw (CTL_REG) | CTL_EEPROM_SELECT | CTL_STORE, CTL_REG);
+ timeout = 100;
+ while ((SMC_inw(CTL_REG) & CTL_STORE) && --timeout)
+ udelay (100);
+ if (timeout == 0) {
+ printf("Timeout Writing EEPROM register %02x\n", reg);
+ return 0;
+ }
+
+ return 1;
+}
+
+static int write_data(u16 *buf, int len)
+{
+ u16 reg = 0x23;
+
+ while (len--)
+ write_eeprom_reg(*buf++, reg++);
+
+ return 0;
+}
+
+static int verify_macaddr(char *s)
+{
+ u16 reg;
+ int i, err = 0;
+
+ printf("MAC Address: ");
+ err = i = 0;
+ for (i = 0; i < 3; i++) {
+ reg = read_eeprom_reg(0x20 + i);
+ printf("%02x:%02x%c", reg & 0xff, reg >> 8, i != 2 ? ':' : '\n');
+ if (s)
+ err |= reg != ((u16 *)s)[i];
+ }
+
+ return err ? 0 : 1;
+}
+
+static int set_mac(char *s)
+{
+ int i;
+ char *e, eaddr[6];
+
+ /* turn string into mac value */
+ for (i = 0; i < 6; i++) {
+ eaddr[i] = simple_strtoul(s, &e, 16);
+ s = (*e) ? e+1 : e;
+ }
+
+ for (i = 0; i < 3; i++)
+ write_eeprom_reg(*(((u16 *)eaddr) + i), 0x20 + i);
+
+ return 0;
+}
+
+static int parse_element(char *s, unsigned char *buf, int len)
+{
+ int cnt;
+ char *p, num[3];
+ unsigned char id;
+
+ id = simple_strtoul(s, &p, 16);
+ if (*p++ != ':')
+ return -1;
+ cnt = 2;
+ num[2] = 0;
+ for (; *p; p += 2) {
+ if (p[1] == 0)
+ return -2;
+ if (cnt + 3 > len)
+ return -3;
+ num[0] = p[0];
+ num[1] = p[1];
+ buf[cnt++] = simple_strtoul(num, NULL, 16);
+ }
+ buf[0] = id;
+ buf[1] = cnt - 2;
+
+ return cnt;
+}
+
+extern int crcek(void);
+
+int eeprom(int argc, char *argv[])
+{
+ int i, len, ret;
+ unsigned char buf[58], *p;
+
+ app_startup(argv);
+ if (get_version() != XF_VERSION) {
+ printf("Wrong XF_VERSION.\n");
+ printf("Application expects ABI version %d\n", XF_VERSION);
+ printf("Actual U-Boot ABI version %d\n", (int)get_version());
+ return 1;
+ }
+
+ return crcek();
+
+ if ((SMC_inw (BANK_SELECT) & 0xFF00) != 0x3300) {
+ printf("SMSC91111 not found.\n");
+ return 2;
+ }
+
+ /* Called without parameters - print MAC address */
+ if (argc < 2) {
+ verify_macaddr(NULL);
+ return 0;
+ }
+
+ /* Print help message */
+ if (argv[1][1] == 'h') {
+ printf("VoiceBlue EEPROM writer\n");
+ printf("Built: %s at %s\n", __DATE__ , __TIME__ );
+ printf("Usage:\n\t<mac_address> [<element_1>] [<...>]\n");
+ return 0;
+ }
+
+ /* Try to parse information elements */
+ len = sizeof(buf);
+ p = buf;
+ for (i = 2; i < argc; i++) {
+ ret = parse_element(argv[i], p, len);
+ switch (ret) {
+ case -1:
+ printf("Element %d: malformed\n", i - 1);
+ return 3;
+ case -2:
+ printf("Element %d: odd character count\n", i - 1);
+ return 3;
+ case -3:
+ printf("Out of EEPROM memory\n");
+ return 3;
+ default:
+ p += ret;
+ len -= ret;
+ }
+ }
+
+ /* First argument (MAC) is mandatory */
+ set_mac(argv[1]);
+ if (verify_macaddr(argv[1])) {
+ printf("*** MAC address does not match! ***\n");
+ return 4;
+ }
+
+ while (len--)
+ *p++ = 0;
+
+ write_data((u16 *)buf, sizeof(buf) >> 1);
+
+ return 0;
+}
--- /dev/null
+/*
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+ * (C) Copyright 2005
+ * Ladislav Michl, 2N Telekomunikace, <michl@2n.cz>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SECTIONS
+{
+ . = ALIGN(4);
+ .text :
+ {
+ eeprom_start.o (.text)
+ *(.text)
+ }
+
+ . = ALIGN(4);
+ .rodata : { *(.rodata) }
+
+ . = ALIGN(4);
+ .data : { *(.data) }
+
+ . = ALIGN(4);
+ .got : { *(.got) }
+
+ . = ALIGN(4);
+ __bss_start = .;
+ .bss : { *(.bss) }
+ _end = .;
+}
--- /dev/null
+/*
+ * Copyright (c) 2005 2N Telekomunikace
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ */
+
+.globl _start
+_start: b eeprom
+
+#include "crcek.h"
+
+/**
+ * do_crc32 - calculate CRC32 of given buffer
+ * r0 - crc
+ * r1 - pointer to buffer
+ * r2 - buffer len
+ */
+ .macro do_crc32
+ ldr r5, FFFFFFFF
+ eor r0, r0, r5
+ adr r3, CRC32_TABLE
+1:
+ ldrb r4, [r1], #1
+ eor r4, r4, r0
+ and r4, r4, #0xff
+ ldr r4, [r3, r4, lsl#2]
+ eor r0, r4, r0, lsr#8
+ subs r2, r2, #0x1
+ bne 1b
+ eor r0, r0, r5
+ .endm
+
+ .macro crcuj, offset, size
+ ldr r1, \offset
+ ldr r2, [r1]
+ cmp r2, #0 @ no data, no problem
+ beq 2f
+ mov r7, #1
+ tst r2, #3 @ unaligned size
+ bne 2f
+ mov r7, #2
+ ldr r0, \size
+ cmp r2, r0 @ bogus size
+ bhi 2f
+ mov r7, #3
+ add r1, r1, #4
+ mov r0, #0
+ do_crc32
+ ldr r1, [r1]
+2:
+ cmp r0, r1
+ .endm
+
+ .macro wait, reg
+ mov \reg, #0x1000
+3:
+ subs \reg, \reg, #0x1
+ bne 3b
+
+ .endm
+.text
+.globl crcek
+crcek:
+ mov r6, #0
+@ crcuj _LOADER1_OFFSET, _LOADER_SIZE
+@ bne crc1_bad
+@ orr r6, r6, #1
+crc1_bad:
+ crcuj _LOADER2_OFFSET, _LOADER_SIZE
+ bne crc2_bad
+ orr r6, r6, #2
+crc2_bad:
+@ mov r0, r6
+ mov pc, lr
+ ldr r3, _LOADER1_OFFSET
+ ldr r4, _LOADER2_OFFSET
+ tst r6, #3
+ beq one_is_bad @ one of them (or both) has bad crc
+ ldr r1, [r3, #4]
+ ldr r2, [r4, #4]
+ cmp r1, r2 @ boot 2nd loader if versions differ
+ beq boot_1st
+ b boot_2nd
+one_is_bad:
+ tst r6, #1
+ bne boot_1st
+ tst r6, #2
+ bne boot_2nd
+@ We are doomed, so let user know.
+ ldr r0, GPIO_BASE @ configure GPIO pins
+ ldr r1, GPIO_DIRECTION
+ strh r1, [r0, #0x08]
+blink_loop:
+ mov r1, #0x08
+ strh r1, [r0, #0x04]
+ wait r3
+ mov r1, #0x10
+ strh r1, [r0, #0x04]
+ wait r3
+ b blink_loop
+boot_1st:
+ add pc, r3, #8
+boot_2nd:
+ add pc, r4, #8
+
+_LOADER_SIZE:
+ .word LOADER_SIZE - 8 @ minus size and crc32
+_LOADER1_OFFSET:
+ .word LOADER1_OFFSET
+_LOADER2_OFFSET:
+ .word LOADER2_OFFSET
+
+FFFFFFFF:
+ .word 0xffffffff
+CRC32_TABLE:
+ .word 0x00000000, 0x77073096, 0xee0e612c, 0x990951ba, 0x076dc419
+ .word 0x706af48f, 0xe963a535, 0x9e6495a3, 0x0edb8832, 0x79dcb8a4
+ .word 0xe0d5e91e, 0x97d2d988, 0x09b64c2b, 0x7eb17cbd, 0xe7b82d07
+ .word 0x90bf1d91, 0x1db71064, 0x6ab020f2, 0xf3b97148, 0x84be41de
+ .word 0x1adad47d, 0x6ddde4eb, 0xf4d4b551, 0x83d385c7, 0x136c9856
+ .word 0x646ba8c0, 0xfd62f97a, 0x8a65c9ec, 0x14015c4f, 0x63066cd9
+ .word 0xfa0f3d63, 0x8d080df5, 0x3b6e20c8, 0x4c69105e, 0xd56041e4
+ .word 0xa2677172, 0x3c03e4d1, 0x4b04d447, 0xd20d85fd, 0xa50ab56b
+ .word 0x35b5a8fa, 0x42b2986c, 0xdbbbc9d6, 0xacbcf940, 0x32d86ce3
+ .word 0x45df5c75, 0xdcd60dcf, 0xabd13d59, 0x26d930ac, 0x51de003a
+ .word 0xc8d75180, 0xbfd06116, 0x21b4f4b5, 0x56b3c423, 0xcfba9599
+ .word 0xb8bda50f, 0x2802b89e, 0x5f058808, 0xc60cd9b2, 0xb10be924
+ .word 0x2f6f7c87, 0x58684c11, 0xc1611dab, 0xb6662d3d, 0x76dc4190
+ .word 0x01db7106, 0x98d220bc, 0xefd5102a, 0x71b18589, 0x06b6b51f
+ .word 0x9fbfe4a5, 0xe8b8d433, 0x7807c9a2, 0x0f00f934, 0x9609a88e
+ .word 0xe10e9818, 0x7f6a0dbb, 0x086d3d2d, 0x91646c97, 0xe6635c01
+ .word 0x6b6b51f4, 0x1c6c6162, 0x856530d8, 0xf262004e, 0x6c0695ed
+ .word 0x1b01a57b, 0x8208f4c1, 0xf50fc457, 0x65b0d9c6, 0x12b7e950
+ .word 0x8bbeb8ea, 0xfcb9887c, 0x62dd1ddf, 0x15da2d49, 0x8cd37cf3
+ .word 0xfbd44c65, 0x4db26158, 0x3ab551ce, 0xa3bc0074, 0xd4bb30e2
+ .word 0x4adfa541, 0x3dd895d7, 0xa4d1c46d, 0xd3d6f4fb, 0x4369e96a
+ .word 0x346ed9fc, 0xad678846, 0xda60b8d0, 0x44042d73, 0x33031de5
+ .word 0xaa0a4c5f, 0xdd0d7cc9, 0x5005713c, 0x270241aa, 0xbe0b1010
+ .word 0xc90c2086, 0x5768b525, 0x206f85b3, 0xb966d409, 0xce61e49f
+ .word 0x5edef90e, 0x29d9c998, 0xb0d09822, 0xc7d7a8b4, 0x59b33d17
+ .word 0x2eb40d81, 0xb7bd5c3b, 0xc0ba6cad, 0xedb88320, 0x9abfb3b6
+ .word 0x03b6e20c, 0x74b1d29a, 0xead54739, 0x9dd277af, 0x04db2615
+ .word 0x73dc1683, 0xe3630b12, 0x94643b84, 0x0d6d6a3e, 0x7a6a5aa8
+ .word 0xe40ecf0b, 0x9309ff9d, 0x0a00ae27, 0x7d079eb1, 0xf00f9344
+ .word 0x8708a3d2, 0x1e01f268, 0x6906c2fe, 0xf762575d, 0x806567cb
+ .word 0x196c3671, 0x6e6b06e7, 0xfed41b76, 0x89d32be0, 0x10da7a5a
+ .word 0x67dd4acc, 0xf9b9df6f, 0x8ebeeff9, 0x17b7be43, 0x60b08ed5
+ .word 0xd6d6a3e8, 0xa1d1937e, 0x38d8c2c4, 0x4fdff252, 0xd1bb67f1
+ .word 0xa6bc5767, 0x3fb506dd, 0x48b2364b, 0xd80d2bda, 0xaf0a1b4c
+ .word 0x36034af6, 0x41047a60, 0xdf60efc3, 0xa867df55, 0x316e8eef
+ .word 0x4669be79, 0xcb61b38c, 0xbc66831a, 0x256fd2a0, 0x5268e236
+ .word 0xcc0c7795, 0xbb0b4703, 0x220216b9, 0x5505262f, 0xc5ba3bbe
+ .word 0xb2bd0b28, 0x2bb45a92, 0x5cb36a04, 0xc2d7ffa7, 0xb5d0cf31
+ .word 0x2cd99e8b, 0x5bdeae1d, 0x9b64c2b0, 0xec63f226, 0x756aa39c
+ .word 0x026d930a, 0x9c0906a9, 0xeb0e363f, 0x72076785, 0x05005713
+ .word 0x95bf4a82, 0xe2b87a14, 0x7bb12bae, 0x0cb61b38, 0x92d28e9b
+ .word 0xe5d5be0d, 0x7cdcefb7, 0x0bdbdf21, 0x86d3d2d4, 0xf1d4e242
+ .word 0x68ddb3f8, 0x1fda836e, 0x81be16cd, 0xf6b9265b, 0x6fb077e1
+ .word 0x18b74777, 0x88085ae6, 0xff0f6a70, 0x66063bca, 0x11010b5c
+ .word 0x8f659eff, 0xf862ae69, 0x616bffd3, 0x166ccf45, 0xa00ae278
+ .word 0xd70dd2ee, 0x4e048354, 0x3903b3c2, 0xa7672661, 0xd06016f7
+ .word 0x4969474d, 0x3e6e77db, 0xaed16a4a, 0xd9d65adc, 0x40df0b66
+ .word 0x37d83bf0, 0xa9bcae53, 0xdebb9ec5, 0x47b2cf7f, 0x30b5ffe9
+ .word 0xbdbdf21c, 0xcabac28a, 0x53b39330, 0x24b4a3a6, 0xbad03605
+ .word 0xcdd70693, 0x54de5729, 0x23d967bf, 0xb3667a2e, 0xc4614ab8
+ .word 0x5d681b02, 0x2a6f2b94, 0xb40bbe37, 0xc30c8ea1, 0x5a05df1b
+ .word 0x2d02ef8d
+
+GPIO_BASE:
+ .word 0xfffce000
+GPIO_DIRECTION:
+ .word 0x0000ffe7
+
+.end
--- /dev/null
+/*
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Alex Zuepke <azu@sysgo.de>
+ *
+ * (C) Copyright 2005
+ * 2N Telekomunikace, a.s. <www.2n.cz>
+ * Ladislav Michl <michl@2n.cz>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+/*#if 0 */
+#if (PHYS_SDRAM_1_SIZE != SZ_32M)
+
+#include "crcek.h"
+
+#if (CFG_MAX_FLASH_BANKS > 1)
+#error There is always only _one_ flash chip
+#endif
+
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
+
+#define CMD_READ_ARRAY 0x000000f0
+#define CMD_UNLOCK1 0x000000aa
+#define CMD_UNLOCK2 0x00000055
+#define CMD_ERASE_SETUP 0x00000080
+#define CMD_ERASE_CONFIRM 0x00000030
+#define CMD_PROGRAM 0x000000a0
+#define CMD_UNLOCK_BYPASS 0x00000020
+
+#define MEM_FLASH_ADDR1 (*(volatile u16 *)(CFG_FLASH_BASE + (0x00000555 << 1)))
+#define MEM_FLASH_ADDR2 (*(volatile u16 *)(CFG_FLASH_BASE + (0x000002aa << 1)))
+
+#define BIT_ERASE_DONE 0x00000080
+#define BIT_RDY_MASK 0x00000080
+#define BIT_PROGRAM_ERROR 0x00000020
+#define BIT_TIMEOUT 0x80000000 /* our flag */
+
+/*-----------------------------------------------------------------------
+ */
+
+ulong flash_init(void)
+{
+ int i;
+
+ flash_info[0].flash_id = (AMD_MANUFACT & FLASH_VENDMASK) |
+ (AMD_ID_LV800B & FLASH_TYPEMASK);
+ flash_info[0].size = PHYS_FLASH_1_SIZE;
+ flash_info[0].sector_count = CFG_MAX_FLASH_SECT;
+ memset(flash_info[0].protect, 0, CFG_MAX_FLASH_SECT);
+
+ for (i = 0; i < flash_info[0].sector_count; i++) {
+ switch (i) {
+ case 0: /* 16kB */
+ flash_info[0].start[0] = CFG_FLASH_BASE;
+ break;
+ case 1: /* 8kB */
+ flash_info[0].start[1] = CFG_FLASH_BASE + 0x4000;
+ break;
+ case 2: /* 8kB */
+ flash_info[0].start[2] = CFG_FLASH_BASE + 0x4000 +
+ 0x2000;
+ break;
+ case 3: /* 32 KB */
+ flash_info[0].start[3] = CFG_FLASH_BASE + 0x4000 +
+ 2 * 0x2000;
+ break;
+ case 4:
+ flash_info[0].start[4] = CFG_FLASH_BASE + 0x4000 +
+ 2 * 0x2000 + 0x8000;
+ break;
+ default: /* 64kB */
+ flash_info[0].start[i] = flash_info[0].start[i-1] +
+ 0x10000;
+ break;
+ }
+ }
+
+ /* U-Boot */
+ flash_protect(FLAG_PROTECT_SET,
+ LOADER1_OFFSET,
+ LOADER1_OFFSET + LOADER_SIZE - 1, flash_info);
+ /* Protect crcek, env and r_env as well */
+ flash_protect(FLAG_PROTECT_SET, 0, 0x8000 - 1, flash_info);
+
+ return flash_info[0].size;
+}
+
+/*-----------------------------------------------------------------------
+ */
+void flash_print_info(flash_info_t *info)
+{
+ int i;
+
+ switch (info->flash_id & FLASH_VENDMASK) {
+ case (AMD_MANUFACT & FLASH_VENDMASK):
+ puts("AMD: ");
+ break;
+ default:
+ puts("Unknown vendor ");
+ break;
+ }
+
+ switch (info->flash_id & FLASH_TYPEMASK) {
+ case (AMD_ID_LV800B & FLASH_TYPEMASK):
+ puts("AM29LV800BB (8Mb)\n");
+ break;
+ default:
+ puts("Unknown chip type\n");
+ return;
+ }
+
+ printf(" Size: %ld MB in %d sectors\n",
+ info->size >> 20, info->sector_count);
+
+ puts(" Sector start addresses:");
+ for (i = 0; i < info->sector_count; i++) {
+ if ((i % 5) == 0)
+ puts("\n ");
+
+ printf(" %08lX%s", info->start[i],
+ info->protect[i] ? " (RO)" : " ");
+ }
+ puts("\n");
+}
+
+/*-----------------------------------------------------------------------
+ */
+
+int flash_erase(flash_info_t *info, int s_first, int s_last)
+{
+ ushort result;
+ int prot, sect;
+ int rc = ERR_OK;
+
+ /* first look for protection bits */
+
+ if (info->flash_id == FLASH_UNKNOWN)
+ return ERR_UNKNOWN_FLASH_TYPE;
+
+ if ((s_first < 0) || (s_first > s_last))
+ return ERR_INVAL;
+
+ if ((info->flash_id & FLASH_VENDMASK) !=
+ (AMD_MANUFACT & FLASH_VENDMASK))
+ return ERR_UNKNOWN_FLASH_VENDOR;
+
+ prot = 0;
+ for (sect = s_first; sect <= s_last; ++sect)
+ if (info->protect[sect])
+ prot++;
+
+ if (prot)
+ printf("- Warning: %d protected sectors will not be erased!\n",
+ prot);
+ else
+ putc('\n');
+
+ /* Start erase on unprotected sectors */
+ for (sect = s_first; sect <= s_last && !ctrlc (); sect++) {
+ if (info->protect[sect] == 0) { /* not protected */
+ vu_short *addr = (vu_short *) (info->start[sect]);
+
+ /* arm simple, non interrupt dependent timer */
+ reset_timer_masked();
+
+ MEM_FLASH_ADDR1 = CMD_UNLOCK1;
+ MEM_FLASH_ADDR2 = CMD_UNLOCK2;
+ MEM_FLASH_ADDR1 = CMD_ERASE_SETUP;
+
+ MEM_FLASH_ADDR1 = CMD_UNLOCK1;
+ MEM_FLASH_ADDR2 = CMD_UNLOCK2;
+ *addr = CMD_ERASE_CONFIRM;
+
+ /* wait until flash is ready */
+ while (1) {
+ result = *addr;
+
+ /* check timeout */
+ if (get_timer_masked() > CFG_FLASH_ERASE_TOUT) {
+ MEM_FLASH_ADDR1 = CMD_READ_ARRAY;
+ rc = ERR_TIMOUT;
+ break;
+ }
+
+ if ((result & 0xfff) & BIT_ERASE_DONE)
+ break;
+
+ if ((result & 0xffff) & BIT_PROGRAM_ERROR) {
+ rc = ERR_PROG_ERROR;
+ break;
+ }
+ }
+
+ MEM_FLASH_ADDR1 = CMD_READ_ARRAY;
+
+ if (rc != ERR_OK)
+ goto out;
+
+ putc('.');
+ }
+ }
+out:
+ /* allow flash to settle - wait 10 ms */
+ udelay_masked(10000);
+
+ return rc;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash
+ */
+
+volatile static int write_hword(flash_info_t *info, ulong dest, ushort data)
+{
+ vu_short *addr = (vu_short *) dest;
+ ushort result;
+ int rc = ERR_OK;
+
+ /* check if flash is (sufficiently) erased */
+ result = *addr;
+ if ((result & data) != data)
+ return ERR_NOT_ERASED;
+
+ MEM_FLASH_ADDR1 = CMD_UNLOCK1;
+ MEM_FLASH_ADDR2 = CMD_UNLOCK2;
+ MEM_FLASH_ADDR1 = CMD_PROGRAM;
+ *addr = data;
+
+ /* arm simple, non interrupt dependent timer */
+ reset_timer_masked();
+
+ /* wait until flash is ready */
+ while (1) {
+ result = *addr;
+
+ /* check timeout */
+ if (get_timer_masked () > CFG_FLASH_ERASE_TOUT) {
+ rc = ERR_TIMOUT;
+ break;
+ }
+
+ if ((result & 0x80) == (data & 0x80))
+ break;
+
+ if ((result & 0xffff) & BIT_PROGRAM_ERROR) {
+ result = *addr;
+
+ if ((result & 0x80) != (data & 0x80))
+ rc = ERR_PROG_ERROR;
+ }
+ }
+
+ *addr = CMD_READ_ARRAY;
+
+ if (*addr != data)
+ rc = ERR_PROG_ERROR;
+
+ return rc;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash.
+ */
+
+int write_buff(flash_info_t *info, uchar *src, ulong addr, ulong cnt)
+{
+ ulong cp, wp;
+ int l;
+ int i, rc;
+ ushort data;
+
+ wp = (addr & ~1); /* get lower word aligned address */
+
+ /*
+ * handle unaligned start bytes
+ */
+ if ((l = addr - wp) != 0) {
+ data = 0;
+ for (i = 0, cp = wp; i < l; ++i, ++cp)
+ data = (data >> 8) | (*(uchar *) cp << 8);
+ for (; i < 2 && cnt > 0; ++i) {
+ data = (data >> 8) | (*src++ << 8);
+ --cnt;
+ ++cp;
+ }
+ for (; cnt == 0 && i < 2; ++i, ++cp)
+ data = (data >> 8) | (*(uchar *) cp << 8);
+
+ if ((rc = write_hword(info, wp, data)) != 0)
+ return (rc);
+ wp += 2;
+ }
+
+ /*
+ * handle word aligned part
+ */
+ while (cnt >= 2) {
+ data = *((vu_short *) src);
+ if ((rc = write_hword(info, wp, data)) != 0)
+ return (rc);
+ src += 2;
+ wp += 2;
+ cnt -= 2;
+ }
+
+ if (cnt == 0)
+ return ERR_OK;
+
+ /*
+ * handle unaligned tail bytes
+ */
+ data = 0;
+ for (i = 0, cp = wp; i < 2 && cnt > 0; ++i, ++cp) {
+ data = (data >> 8) | (*src++ << 8);
+ --cnt;
+ }
+ for (; i < 2; ++i, ++cp)
+ data = (data >> 8) | (*(uchar *) cp << 8);
+
+ return write_hword(info, wp, data);
+}
+
+#endif
--- /dev/null
+/*
+ * (C) Copyright 2005 2N TELEKOMUNIKACE, Ladislav Michl
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+#if (CONFIG_COMMANDS & CFG_CMD_NAND)
+
+#include <nand.h>
+
+/*
+ * hardware specific access to control-lines
+ */
+#define MASK_CLE 0x02
+#define MASK_ALE 0x04
+
+static void netstar_nand_hwcontrol(struct mtd_info *mtd, int cmd)
+{
+ struct nand_chip *this = mtd->priv;
+ ulong IO_ADDR_W = (ulong) this->IO_ADDR_W;
+
+ IO_ADDR_W &= ~(MASK_ALE|MASK_CLE);
+ switch (cmd) {
+ case NAND_CTL_SETCLE: IO_ADDR_W |= MASK_CLE; break;
+ case NAND_CTL_SETALE: IO_ADDR_W |= MASK_ALE; break;
+ }
+ this->IO_ADDR_W = (void *) IO_ADDR_W;
+}
+
+/*
+ * chip R/B detection
+ */
+static int netstar_nand_ready(struct mtd_info *mtd)
+{
+ return (*(volatile ushort *)GPIO_DATA_INPUT_REG) & 0x02;
+}
+
+void board_nand_init(struct nand_chip *nand)
+{
+ nand->options = NAND_SAMSUNG_LP_OPTIONS;
+ nand->eccmode = NAND_ECC_SOFT;
+ nand->hwcontrol = netstar_nand_hwcontrol;
+/* nand->dev_ready = netstar_nand_ready; */
+ nand->chip_delay = 18;
+}
+#endif
--- /dev/null
+/*
+ * (C) Copyright 2005 2N TELEKOMUNIKACE, Ladislav Michl
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+int board_init(void)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+
+ /* arch number of NetStar board */
+ /* TODO: use define from asm/mach-types.h */
+ gd->bd->bi_arch_number = 692;
+
+ /* adress of boot parameters */
+ gd->bd->bi_boot_params = 0x10000100;
+
+ return 0;
+}
+
+int dram_init(void)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+
+ gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+ gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
+
+ /* Take the Ethernet controller out of reset and wait
+ * for the EEPROM load to complete. */
+ *((volatile unsigned short *) GPIO_DATA_OUTPUT_REG) |= 0x80;
+ udelay(10); /* doesn't work before interrupt_init call */
+ *((volatile unsigned short *) GPIO_DATA_OUTPUT_REG) &= ~0x80;
+ udelay(500);
+
+ return 0;
+}
+
+extern void partition_flash(void);
+
+int misc_init_r(void)
+{
+ return 0;
+}
+
+extern void nand_init(void);
+
+int board_late_init(void)
+{
+ return 0;
+}
--- /dev/null
+/*
+ * Board specific setup info
+ *
+ * (C) Copyright 2004 Ales Jindra <jindra@2n.cz>
+ * (C) Copyright 2005 Ladislav Michl <michl@2n.cz>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <version.h>
+
+_TEXT_BASE:
+ .word TEXT_BASE /* SDRAM load addr from config.mk */
+
+OMAP5910_LPG1_BASE: .word 0xfffbd000
+OMAP5910_TIPB_SWITCHES_BASE: .word 0xfffbc800
+OMAP5910_MPU_TC_BASE: .word 0xfffecc00
+OMAP5910_MPU_CLKM_BASE: .word 0xfffece00
+OMAP5910_ULPD_PWR_MNG_BASE: .word 0xfffe0800
+OMAP5910_DPLL1_BASE: .word 0xfffecf00
+OMAP5910_GPIO_BASE: .word 0xfffce000
+OMAP5910_MPU_WD_TIMER_BASE: .word 0xfffec800
+OMAP5910_MPUI_BASE: .word 0xfffec900
+
+_OMAP5910_ARM_CKCTL: .word OMAP5910_ARM_CKCTL
+_OMAP5910_ARM_EN_CLK: .word OMAP5910_ARM_EN_CLK
+
+OMAP5910_MPUI_CTRL: .word 0x0000ff1b
+
+VAL_EMIFS_CS0_CONFIG: .word 0x00009090
+VAL_EMIFS_CS1_CONFIG: .word 0x00003031
+VAL_EMIFS_CS2_CONFIG: .word 0x0000a0a1
+VAL_EMIFS_CS3_CONFIG: .word 0x0000c0c0
+VAL_EMIFS_DYN_WAIT: .word 0x00000000
+/* autorefresh counter 0x246 ((64000000/13.4)-400)/8192) */
+ /* SLRF SD_RET ARE SDRAM_TYPE ARCV SDRAM_FREQUENCY PWD CLK */
+
+#if (PHYS_SDRAM_1_SIZE == SZ_32M)
+VAL_EMIFF_SDRAM_CONFIG: .word ((0 << 0) | (0 << 1) | (3 << 2) | (0xf << 4) | (0x246 << 8) | (0 << 24) | (0 << 26) | (0 << 27))
+#else
+VAL_EMIFF_SDRAM_CONFIG: .word ((0 << 0) | (0 << 1) | (3 << 2) | (0xd << 4) | (0x246 << 8) | (0 << 24) | (0 << 26) | (0 << 27))
+#endif
+
+VAL_EMIFF_SDRAM_CONFIG2: .word 0x00000003
+VAL_EMIFF_MRS: .word 0x00000037
+
+/*
+ * GPIO04 - Green LED (Red LED is connected to LED Pulse Generator)
+ * GPIO07 - LAN91C111 reset
+ */
+GPIO_DIRECTION:
+ .word 0x0000ff6f
+/*
+ * Disable everything (green LED is connected via invertor)
+ */
+GPIO_OUTPUT:
+ .word 0x00000010
+
+MUX_CONFIG_BASE:
+ .word 0xfffe1000
+
+MUX_CONFIG_VALUES:
+ .align 4
+ .word 0x00000000 @ FUNC_MUX_CTRL_0
+ .word 0x00000000 @ FUNC_MUX_CTRL_1
+ .word 0x00000000 @ FUNC_MUX_CTRL_2
+ .word 0x00000000 @ FUNC_MUX_CTRL_3
+ .word 0x00000000 @ FUNC_MUX_CTRL_4
+ .word 0x02080480 @ FUNC_MUX_CTRL_5
+ .word 0x0100001c @ FUNC_MUX_CTRL_6
+ .word 0x0004800b @ FUNC_MUX_CTRL_7
+ .word 0x10001200 @ FUNC_MUX_CTRL_8
+ .word 0x01201012 @ FUNC_MUX_CTRL_9
+ .word 0x02082248 @ FUNC_MUX_CTRL_A
+ .word 0x00000248 @ FUNC_MUX_CTRL_B
+ .word 0x12240000 @ FUNC_MUX_CTRL_C
+ .word 0x00002000 @ FUNC_MUX_CTRL_D
+ .word 0x00000000 @ PULL_DWN_CTRL_0
+ .word 0x00000800 @ PULL_DWN_CTRL_1
+ .word 0x01801000 @ PULL_DWN_CTRL_2
+ .word 0x00000000 @ PULL_DWN_CTRL_3
+ .word 0x00000000 @ GATE_INH_CTRL_0
+ .word 0x00000000 @ VOLTAGE_CTRL_0
+ .word 0x00000000 @ TEST_DBG_CTRL_0
+ .word 0x00000006 @ MOD_CONF_CTRL_0
+ .word 0x0000eaef @ COMP_MODE_CTRL_0
+
+MUX_CONFIG_OFFSETS:
+ .align 1
+ .byte 0x00 @ FUNC_MUX_CTRL_0
+ .byte 0x04 @ FUNC_MUX_CTRL_1
+ .byte 0x08 @ FUNC_MUX_CTRL_2
+ .byte 0x10 @ FUNC_MUX_CTRL_3
+ .byte 0x14 @ FUNC_MUX_CTRL_4
+ .byte 0x18 @ FUNC_MUX_CTRL_5
+ .byte 0x1c @ FUNC_MUX_CTRL_6
+ .byte 0x20 @ FUNC_MUX_CTRL_7
+ .byte 0x24 @ FUNC_MUX_CTRL_8
+ .byte 0x28 @ FUNC_MUX_CTRL_9
+ .byte 0x2c @ FUNC_MUX_CTRL_A
+ .byte 0x30 @ FUNC_MUX_CTRL_B
+ .byte 0x34 @ FUNC_MUX_CTRL_C
+ .byte 0x38 @ FUNC_MUX_CTRL_D
+ .byte 0x40 @ PULL_DWN_CTRL_0
+ .byte 0x44 @ PULL_DWN_CTRL_1
+ .byte 0x48 @ PULL_DWN_CTRL_2
+ .byte 0x4c @ PULL_DWN_CTRL_3
+ .byte 0x50 @ GATE_INH_CTRL_0
+ .byte 0x60 @ VOLTAGE_CTRL_0
+ .byte 0x70 @ TEST_DBG_CTRL_0
+ .byte 0x80 @ MOD_CONF_CTRL_0
+ .byte 0x0c @ COMP_MODE_CTRL_0
+ .byte 0xff
+
+.globl platformsetup
+platformsetup:
+ /* Improve performance a bit... */
+ mrc p15, 0, r1, c0, c0, 0 @ read C15 ID register
+ mrc p15, 0, r1, c0, c0, 1 @ read C15 Cache information register
+ mrc p15, 0, r1, c1, c0, 0 @ read C15 Control register
+ orr r1, r1, #0x1000 @ enable I-cache, map interrupt vector 0xffff0000
+ mcr p15, 0, r1, c1, c0, 0 @ write C15 Control register
+ mov r1, #0x00
+ mcr p15, 0, r1, c7, c5, 0 @ Flush I-cache
+ nop
+ nop
+ nop
+ nop
+
+ /* Setup clocking mode */
+ ldr r0, OMAP5910_MPU_CLKM_BASE @ prepare base of CLOCK unit
+ ldrh r1, [r0, #0x18] @ get reset status
+ bic r1, r1, #(7 << 11) @ clear clock select
+ orr r1, r1, #(2 << 11) @ set synchronous scalable
+ mov r2, #0 @ set wait counter to 100 clock cycles
+
+icache_loop:
+ cmp r2, #0x01
+ streqh r1, [r0, #0x18]
+ add r2, r2, #0x01
+ cmp r2, #0x10
+ bne icache_loop
+ nop
+
+ /* Setup clock divisors */
+ ldr r0, OMAP5910_MPU_CLKM_BASE @ base of CLOCK unit
+ ldr r1, _OMAP5910_ARM_CKCTL
+ orr r1, r1, #0x2000 @ enable DSP clock
+ strh r1, [r0, #0x00] @ setup clock divisors
+
+ /* Setup DPLL to generate requested freq */
+ ldr r0, OMAP5910_DPLL1_BASE @ base of DPLL1 register
+ mov r1, #0x0010 @ set PLL_ENABLE
+ orr r1, r1, #0x2000 @ set IOB to new locking
+ orr r1, r1, #(OMAP5910_DPLL_MUL << 7) @ setup multiplier CLKREF
+ orr r1, r1, #(OMAP5910_DPLL_DIV << 5) @ setup divider CLKREF
+ strh r1, [r0] @ write
+
+locking:
+ ldrh r1, [r0] @ get DPLL value
+ tst r1, #0x01
+ beq locking @ while LOCK not set
+
+ /* Enable clock */
+ ldr r0, OMAP5910_MPU_CLKM_BASE @ base of CLOCK unit
+ mov r1, #(1 << 10) @ disable idle mode do not check
+ @ nWAKEUP pin, other remain active
+ strh r1, [r0, #0x04]
+ ldr r1, _OMAP5910_ARM_EN_CLK
+ strh r1, [r0, #0x08]
+ mov r1, #0x003f @ FLASH.RP not enabled in idle and
+ @ max delayed ( 32 x CLKIN )
+ strh r1, [r0, #0x0c]
+
+ /* Configure 5910 pins functions to match our board. */
+ ldr r0, MUX_CONFIG_BASE
+ adr r1, MUX_CONFIG_VALUES
+ adr r2, MUX_CONFIG_OFFSETS
+next_mux_cfg:
+ ldrb r3, [r2], #1
+ ldr r4, [r1], #4
+ cmp r3, #0xff
+ strne r4, [r0, r3]
+ bne next_mux_cfg
+
+ /* Configure GPIO pins (also disables Green LED) */
+ ldr r0, OMAP5910_GPIO_BASE
+ ldr r1, GPIO_OUTPUT
+ strh r1, [r0, #0x04]
+ ldr r1, GPIO_DIRECTION
+ strh r1, [r0, #0x08]
+
+ /* EnablePeripherals */
+ ldr r0, OMAP5910_MPU_CLKM_BASE @ CLOCK unit
+ mov r1, #0x0001 @ Peripheral enable
+ strh r1, [r0, #0x14]
+
+ /* Program LED Pulse Generator */
+ ldr r0, OMAP5910_LPG1_BASE @ 1st LED Pulse Generator
+ mov r1, #0x7F @ Set obscure frequency in
+ strb r1, [r0, #0x00] @ LCR
+ mov r1, #0x01 @ Enable clock (CLK_EN) in
+ strb r1, [r0, #0x04] @ PMR
+
+ /* TIPB Lock UART1 */
+ ldr r0, OMAP5910_TIPB_SWITCHES_BASE @ prepare base of TIPB switches
+ mov r1, #1 @ ARM allocated
+ strh r1, [r0,#0x04] @ clear IRQ line and status bits
+ strh r1, [r0,#0x00]
+ ldrh r1, [r0,#0x04]
+
+ /* Disable watchdog */
+ ldr r0, OMAP5910_MPU_WD_TIMER_BASE
+ mov r1, #0xf5
+ strh r1, [r0, #0x8]
+ mov r1, #0xa0
+ strh r1, [r0, #0x8]
+
+ /* Enable MCLK */
+ ldr r0, OMAP5910_ULPD_PWR_MNG_BASE
+ mov r1, #0x6
+ strh r1, [r0, #0x34]
+ strh r1, [r0, #0x34]
+
+ /* Setup clock divisors */
+ ldr r0, OMAP5910_ULPD_PWR_MNG_BASE @ base of ULDPL DPLL1 register
+
+ mov r1, #0x0010 @ set PLL_ENABLE
+ orr r1, r1, #0x2000 @ set IOB to new locking
+ strh r1, [r0] @ write
+
+ulocking:
+ ldrh r1, [r0] @ get DPLL value
+ tst r1, #1
+ beq ulocking @ while LOCK not set
+
+ /* EMIF init */
+ ldr r0, OMAP5910_MPU_TC_BASE
+ ldrh r1, [r0, #0x0c] @ EMIFS_CONFIG_REG
+ bic r1, r1, #0x0c @ pwr down disabled, flash WP
+ orr r1, r1, #0x01
+ str r1, [r0, #0x0c]
+
+ ldr r1, VAL_EMIFS_CS0_CONFIG
+ str r1, [r0, #0x10] @ EMIFS_CS0_CONFIG
+ ldr r1, VAL_EMIFS_CS1_CONFIG
+ str r1, [r0, #0x14] @ EMIFS_CS1_CONFIG
+ ldr r1, VAL_EMIFS_CS2_CONFIG
+ str r1, [r0, #0x18] @ EMIFS_CS2_CONFIG
+ ldr r1, VAL_EMIFS_CS3_CONFIG
+ str r1, [r0, #0x1c] @ EMIFS_CS3_CONFIG
+ ldr r1, VAL_EMIFS_DYN_WAIT
+ str r1, [r0, #0x40] @ EMIFS_CFG_DYN_WAIT
+
+ /* Setup SDRAM */
+ ldr r1, VAL_EMIFF_SDRAM_CONFIG
+ str r1, [r0, #0x20] @ EMIFF_SDRAM_CONFIG
+ ldr r1, VAL_EMIFF_SDRAM_CONFIG2
+ str r1, [r0, #0x3c] @ EMIFF_SDRAM_CONFIG2
+ ldr r1, VAL_EMIFF_MRS
+ str r1, [r0, #0x24] @ EMIFF_MRS
+ /* SDRAM needs 100us to stabilize */
+ mov r0, #0x4000
+sdelay:
+ subs r0, r0, #0x1
+ bne sdelay
+
+ /* back to arch calling code */
+ mov pc, lr
+.end
--- /dev/null
+/*
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SECTIONS
+{
+ . = 0x00000000;
+
+ . = ALIGN(4);
+ .text :
+ {
+ cpu/arm925t/start.o (.text)
+ *(.text)
+ }
+
+ . = ALIGN(4);
+ .rodata : { *(.rodata) }
+
+ . = ALIGN(4);
+ .data : { *(.data) }
+
+ . = ALIGN(4);
+ .got : { *(.got) }
+
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ __bss_start = .;
+ .bss : { *(.bss) }
+ _end = .;
+}
#include <cramfs/cramfs_fs.h>
+#ifdef CONFIG_NEW_NAND_CODE
+#include <nand.h>
+#endif
+
/* enable/disable debugging messages */
#define DEBUG
#undef DEBUG
{
#if defined(CONFIG_JFFS2_NAND) && (CONFIG_COMMANDS & CFG_CMD_NAND)
/* info for NAND chips */
- extern struct nand_chip nand_dev_desc[CFG_MAX_NAND_DEVICE];
- struct nand_chip *nand;
+ nand_info_t *nand;
- nand = &nand_dev_desc[id->num];
+ nand = &nand_info[id->num];
if ((unsigned long)(part->offset) % nand->erasesize) {
printf("%s%d: partition (%s) start offset alignment incorrect\n",
}
}
-
+#ifndef CONFIG_NEW_NAND_CODE
jffs2_free_cache(part);
+#endif
list_del(&part->link);
free(part);
dev->num_parts--;
list_for_each_safe(entry, n, head) {
part_tmp = list_entry(entry, struct part_info, link);
+#ifndef CONFIG_NEW_NAND_CODE
jffs2_free_cache(part_tmp);
+#endif
list_del(entry);
free(part_tmp);
}
if (num < CFG_MAX_FLASH_BANKS) {
extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
*size = flash_info[num].size;
+
return 0;
}
} else if (type == MTD_DEV_TYPE_NAND) {
#if defined(CONFIG_JFFS2_NAND) && (CONFIG_COMMANDS & CFG_CMD_NAND)
if (num < CFG_MAX_NAND_DEVICE) {
+#ifdef CONFIG_NEW_NAND_CODE
+ *size = nand_info[num].size;
+#else
extern struct nand_chip nand_dev_desc[CFG_MAX_NAND_DEVICE];
*size = nand_dev_desc[num].totlen;
+#endif
return 0;
}
/*
- * Rick Bronson and Pantelis Antoniou
+ * Driver for NAND support, Rick Bronson
+ * borrowed heavily from:
+ * (c) 1999 Machine Vision Holdings, Inc.
+ * (c) 1999, 2000 David Woodhouse <dwmw2@infradead.org>
+ *
+ * Added 16-bit nand support
+ * (C) 2004 Texas Instruments
*/
#include <common.h>
-
-#if (CONFIG_COMMANDS & CFG_CMD_NAND)
-
#include <command.h>
-#include <watchdog.h>
#include <malloc.h>
-#include <asm/byteorder.h>
+#include <asm/io.h>
+#include <watchdog.h>
#ifdef CONFIG_SHOW_BOOT_PROGRESS
# include <status_led.h>
# define SHOW_BOOT_PROGRESS(arg)
#endif
-#include <jffs2/jffs2.h>
-#include <nand.h>
-
-extern nand_info_t nand_info[]; /* info for NAND chips */
+#if (CONFIG_COMMANDS & CFG_CMD_NAND) && !defined CONFIG_NEW_NAND_CODE
-static int nand_dump_oob(nand_info_t *nand, ulong off)
-{
- return 0;
-}
-
-static int nand_dump(nand_info_t *nand, ulong off)
-{
- int i;
- u_char *buf, *p;
-
- buf = malloc(nand->oobblock + nand->oobsize);
- if (!buf) {
- puts("No memory for page buffer\n");
- return 1;
- }
- off &= ~(nand->oobblock - 1);
- i = nand_read_raw(nand, buf, off, nand->oobblock, nand->oobsize);
- if (i < 0) {
- printf("Error (%d) reading page %08x\n", i, off);
- free(buf);
- return 1;
- }
- printf("Page %08x dump:\n", off);
- i = nand->oobblock >> 4; p = buf;
- while (i--) {
- printf( "\t%02x %02x %02x %02x %02x %02x %02x %02x"
- " %02x %02x %02x %02x %02x %02x %02x %02x\n",
- p[0], p[1], p[2], p[3], p[4], p[5], p[6], p[7],
- p[8], p[9], p[10], p[11], p[12], p[13], p[14], p[15]);
- p += 16;
- }
- puts("OOB:\n");
- i = nand->oobsize >> 3;
- while (i--) {
- printf( "\t%02x %02x %02x %02x %02x %02x %02x %02x\n",
- p[0], p[1], p[2], p[3], p[4], p[5], p[6], p[7]);
- p += 8;
- }
- free(buf);
+#include <linux/mtd/nand.h>
+#include <linux/mtd/nand_ids.h>
+#include <jffs2/jffs2.h>
- return 0;
-}
+#ifdef CONFIG_OMAP1510
+void archflashwp(void *archdata, int wp);
+#endif
-/* ------------------------------------------------------------------------- */
+#define ROUND_DOWN(value,boundary) ((value) & (~((boundary)-1)))
-static void
-arg_off_size(int argc, char *argv[], ulong *off, ulong *size, ulong totsize)
-{
- *off = 0;
- *size = 0;
+/*
+ * Definition of the out of band configuration structure
+ */
+struct nand_oob_config {
+ int ecc_pos[6]; /* position of ECC bytes inside oob */
+ int badblock_pos; /* position of bad block flag inside oob -1 = inactive */
+ int eccvalid_pos; /* position of ECC valid flag inside oob -1 = inactive */
+} oob_config = { {0}, 0, 0};
+
+#undef NAND_DEBUG
+#undef PSYCHO_DEBUG
+
+/* ****************** WARNING *********************
+ * When ALLOW_ERASE_BAD_DEBUG is non-zero the erase command will
+ * erase (or at least attempt to erase) blocks that are marked
+ * bad. This can be very handy if you are _sure_ that the block
+ * is OK, say because you marked a good block bad to test bad
+ * block handling and you are done testing, or if you have
+ * accidentally marked blocks bad.
+ *
+ * Erasing factory marked bad blocks is a _bad_ idea. If the
+ * erase succeeds there is no reliable way to find them again,
+ * and attempting to program or erase bad blocks can affect
+ * the data in _other_ (good) blocks.
+ */
+#define ALLOW_ERASE_BAD_DEBUG 0
-#if defined(CONFIG_JFFS2_NAND) && defined(CFG_JFFS_CUSTOM_PART)
- if (argc >= 1 && strcmp(argv[0], "partition") == 0) {
- int part_num;
- struct part_info *part;
- const char *partstr;
+#define CONFIG_MTD_NAND_ECC /* enable ECC */
+#define CONFIG_MTD_NAND_ECC_JFFS2
- if (argc >= 2)
- partstr = argv[1];
- else
- partstr = getenv("partition");
+/* bits for nand_rw() `cmd'; or together as needed */
+#define NANDRW_READ 0x01
+#define NANDRW_WRITE 0x00
+#define NANDRW_JFFS2 0x02
+#define NANDRW_JFFS2_SKIP 0x04
- if (partstr)
- part_num = (int)simple_strtoul(partstr, NULL, 10);
- else
- part_num = 0;
-
- part = jffs2_part_info(part_num);
- if (part == NULL) {
- printf("\nInvalid partition %d\n", part_num);
- return;
- }
- *size = part->size;
- *off = (ulong)part->offset;
- } else
+/*
+ * Function Prototypes
+ */
+static void nand_print(struct nand_chip *nand);
+int nand_rw (struct nand_chip* nand, int cmd,
+ size_t start, size_t len,
+ size_t * retlen, u_char * buf);
+int nand_erase(struct nand_chip* nand, size_t ofs, size_t len, int clean);
+static int nand_read_ecc(struct nand_chip *nand, size_t start, size_t len,
+ size_t * retlen, u_char *buf, u_char *ecc_code);
+static int nand_write_ecc (struct nand_chip* nand, size_t to, size_t len,
+ size_t * retlen, const u_char * buf, u_char * ecc_code);
+static void nand_print_bad(struct nand_chip *nand);
+static int nand_read_oob(struct nand_chip* nand, size_t ofs, size_t len,
+ size_t * retlen, u_char * buf);
+static int nand_write_oob(struct nand_chip* nand, size_t ofs, size_t len,
+ size_t * retlen, const u_char * buf);
+static int NanD_WaitReady(struct nand_chip *nand, int ale_wait);
+#ifdef CONFIG_MTD_NAND_ECC
+static int nand_correct_data (u_char *dat, u_char *read_ecc, u_char *calc_ecc);
+static void nand_calculate_ecc (const u_char *dat, u_char *ecc_code);
#endif
- {
- if (argc >= 1)
- *off = (ulong)simple_strtoul(argv[0], NULL, 16);
- else
- *off = 0;
- if (argc >= 2)
- *size = (ulong)simple_strtoul(argv[1], NULL, 16);
- else
- *size = totsize - *off;
+struct nand_chip nand_dev_desc[CFG_MAX_NAND_DEVICE] = {{0}};
- }
+/* Current NAND Device */
+static int curr_device = -1;
-}
+/* ------------------------------------------------------------------------- */
-int do_nand(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
+int do_nand (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
- int i, dev, ret;
- ulong addr, off, size;
- char *cmd, *s;
- nand_info_t *nand;
+ int rcode = 0;
- /* at least two arguments please */
- if (argc < 2)
- goto usage;
-
- cmd = argv[1];
+ switch (argc) {
+ case 0:
+ case 1:
+ printf ("Usage:\n%s\n", cmdtp->usage);
+ return 1;
+ case 2:
+ if (strcmp(argv[1],"info") == 0) {
+ int i;
- if (strcmp(cmd, "info") == 0) {
+ putc ('\n');
- putc('\n');
- for (i = 0; i < CFG_MAX_NAND_DEVICE; i++) {
- if (nand_info[i].name)
- printf("Device %d: %s\n", i, nand_info[i].name);
+ for (i=0; i<CFG_MAX_NAND_DEVICE; ++i) {
+ if(nand_dev_desc[i].ChipID == NAND_ChipID_UNKNOWN)
+ continue; /* list only known devices */
+ printf ("Device %d: ", i);
+ nand_print(&nand_dev_desc[i]);
}
return 0;
- }
- if (strcmp(cmd, "device") == 0) {
-
- if (argc < 3) {
- if ((nand_curr_device < 0) ||
- (nand_curr_device >= CFG_MAX_NAND_DEVICE))
- puts("\nno devices available\n");
- else
- printf("\nDevice %d: %s\n", nand_curr_device,
- nand_info[nand_curr_device].name);
- return 0;
- }
- dev = (int)simple_strtoul(argv[2], NULL, 10);
- if (dev < 0 || dev >= CFG_MAX_NAND_DEVICE || !nand_info[dev].name) {
- puts("No such device\n");
+ } else if (strcmp(argv[1],"device") == 0) {
+ if ((curr_device < 0) || (curr_device >= CFG_MAX_NAND_DEVICE)) {
+ puts ("\nno devices available\n");
return 1;
}
- printf("Device %d: %s", dev, nand_info[dev].name);
- puts("... is now current device\n");
- nand_curr_device = dev;
+ printf ("\nDevice %d: ", curr_device);
+ nand_print(&nand_dev_desc[curr_device]);
return 0;
- }
-
- if (strcmp(cmd, "bad") != 0 && strcmp(cmd, "erase") != 0 &&
- strncmp(cmd, "dump", 4) != 0 &&
- strncmp(cmd, "read", 4) != 0 && strncmp(cmd, "write", 5) != 0
-#ifdef CONFIG_MTD_NAND_UNSAFE
- && strcmp(cmd, "scrub") != 0 && strcmp(cmd, "biterr") != 0
- && strcmp(cmd, "markbad") != 0
-#endif
- )
- goto usage;
-
- /* the following commands operate on the current device */
- if (nand_curr_device < 0 || nand_curr_device >= CFG_MAX_NAND_DEVICE ||
- !nand_info[nand_curr_device].name) {
- puts("\nno devices available\n");
- return 1;
- }
- nand = &nand_info[nand_curr_device];
- if (strcmp(cmd, "bad") == 0) {
- printf("\nDevice %d bad blocks:\n", nand_curr_device);
- for (off = 0; off < nand->size; off += nand->erasesize)
- if (nand_block_isbad(nand, off))
- printf(" %08x\n", off);
+ } else if (strcmp(argv[1],"bad") == 0) {
+ if ((curr_device < 0) || (curr_device >= CFG_MAX_NAND_DEVICE)) {
+ puts ("\nno devices available\n");
+ return 1;
+ }
+ printf ("\nDevice %d bad blocks:\n", curr_device);
+ nand_print_bad(&nand_dev_desc[curr_device]);
return 0;
- }
-
- if (strcmp(cmd, "erase") == 0
-#ifdef CONFIG_MTD_NAND_UNSAFE
- || strcmp(cmd, "scrub") == 0
-#endif
- ) {
-#ifdef CONFIG_MTD_NAND_UNSAFE
- i = strcmp(cmd, "scrub") == 0; /* 1 scrub, 0 = erase */
-#endif
+ }
+ printf ("Usage:\n%s\n", cmdtp->usage);
+ return 1;
+ case 3:
+ if (strcmp(argv[1],"device") == 0) {
+ int dev = (int)simple_strtoul(argv[2], NULL, 10);
- arg_off_size(argc - 2, argv + 2, &off, &size, nand->size);
- if (off == 0 && size == 0)
+ printf ("\nDevice %d: ", dev);
+ if (dev >= CFG_MAX_NAND_DEVICE) {
+ puts ("unknown device\n");
return 1;
+ }
+ nand_print(&nand_dev_desc[dev]);
+ /*nand_print (dev);*/
- printf("\nNAND %s: device %d offset 0x%x, size 0x%x ",
-#ifdef CONFIG_MTD_NAND_UNSAFE
- i ? "scrub" :
-#endif
- "erase",
- nand_curr_device, off, size);
+ if (nand_dev_desc[dev].ChipID == NAND_ChipID_UNKNOWN) {
+ return 1;
+ }
-#ifdef CONFIG_MTD_NAND_UNSAFE
- if (i)
- ret = nand_scrub(nand, off, size);
- else
-#endif
- ret = nand_erase(nand, off, size);
+ curr_device = dev;
- printf("%s\n", ret ? "ERROR" : "OK");
+ puts ("... is now current device\n");
- return ret == 0 ? 0 : 1;
+ return 0;
}
+ else if (strcmp(argv[1],"erase") == 0 && strcmp(argv[2], "clean") == 0) {
+ struct nand_chip* nand = &nand_dev_desc[curr_device];
+ ulong off = 0;
+ ulong size = nand->totlen;
+ int ret;
- if (strncmp(cmd, "dump", 4) == 0) {
- if (argc < 3)
- goto usage;
+ printf ("\nNAND erase: device %d offset %ld, size %ld ... ",
+ curr_device, off, size);
- s = strchr(cmd, '.');
- off = (int)simple_strtoul(argv[2], NULL, 16);
+ ret = nand_erase (nand, off, size, 1);
- if (s != NULL && strcmp(s, ".oob") == 0)
- ret = nand_dump_oob(nand, off);
- else
- ret = nand_dump(nand, off);
-
- return ret == 0 ? 1 : 0;
+ printf("%s\n", ret ? "ERROR" : "OK");
+ return ret;
}
- /* read write */
- if (strncmp(cmd, "read", 4) == 0 || strncmp(cmd, "write", 5) == 0) {
- if (argc < 4)
- goto usage;
-/*
- s = strchr(cmd, '.');
- clean = CLEAN_NONE;
- if (s != NULL) {
- if (strcmp(s, ".jffs2") == 0 || strcmp(s, ".e") == 0
- || strcmp(s, ".i"))
- clean = CLEAN_JFFS2;
- }
-*/
- addr = (ulong)simple_strtoul(argv[2], NULL, 16);
-
- arg_off_size(argc - 3, argv + 3, &off, &size, nand->size);
- if (off == 0 && size == 0)
+ printf ("Usage:\n%s\n", cmdtp->usage);
+ return 1;
+ default:
+ /* at least 4 args */
+
+ if (strncmp(argv[1], "read", 4) == 0 ||
+ strncmp(argv[1], "write", 5) == 0) {
+ ulong addr = simple_strtoul(argv[2], NULL, 16);
+ ulong off = simple_strtoul(argv[3], NULL, 16);
+ ulong size = simple_strtoul(argv[4], NULL, 16);
+ int cmd = (strncmp(argv[1], "read", 4) == 0) ?
+ NANDRW_READ : NANDRW_WRITE;
+ int ret, total;
+ char* cmdtail = strchr(argv[1], '.');
+
+ if (cmdtail && !strncmp(cmdtail, ".oob", 2)) {
+ /* read out-of-band data */
+ if (cmd & NANDRW_READ) {
+ ret = nand_read_oob(nand_dev_desc + curr_device,
+ off, size, &total,
+ (u_char*)addr);
+ }
+ else {
+ ret = nand_write_oob(nand_dev_desc + curr_device,
+ off, size, &total,
+ (u_char*)addr);
+ }
+ return ret;
+ }
+ else if (cmdtail && !strncmp(cmdtail, ".jffs2", 2))
+ cmd |= NANDRW_JFFS2; /* skip bad blocks */
+ else if (cmdtail && !strncmp(cmdtail, ".jffs2s", 2)) {
+ cmd |= NANDRW_JFFS2; /* skip bad blocks (on read too) */
+ if (cmd & NANDRW_READ)
+ cmd |= NANDRW_JFFS2_SKIP; /* skip bad blocks (on read too) */
+ }
+#ifdef SXNI855T
+ /* need ".e" same as ".j" for compatibility with older units */
+ else if (cmdtail && !strcmp(cmdtail, ".e"))
+ cmd |= NANDRW_JFFS2; /* skip bad blocks */
+#endif
+#ifdef CFG_NAND_SKIP_BAD_DOT_I
+ /* need ".i" same as ".jffs2s" for compatibility with older units (esd) */
+ /* ".i" for image -> read skips bad block (no 0xff) */
+ else if (cmdtail && !strcmp(cmdtail, ".i")) {
+ cmd |= NANDRW_JFFS2; /* skip bad blocks (on read too) */
+ if (cmd & NANDRW_READ)
+ cmd |= NANDRW_JFFS2_SKIP; /* skip bad blocks (on read too) */
+ }
+#endif /* CFG_NAND_SKIP_BAD_DOT_I */
+ else if (cmdtail) {
+ printf ("Usage:\n%s\n", cmdtp->usage);
return 1;
+ }
- i = strncmp(cmd, "read", 4) == 0; /* 1 = read, 0 = write */
- printf("\nNAND %s: device %d offset %u, size %u ... ",
- i ? "read" : "write", nand_curr_device, off, size);
+ printf ("\nNAND %s: device %d offset %ld, size %ld ... ",
+ (cmd & NANDRW_READ) ? "read" : "write",
+ curr_device, off, size);
- if (i)
- ret = nand_read(nand, off, &size, (u_char *)addr);
- else
- ret = nand_write(nand, off, &size, (u_char *)addr);
+ ret = nand_rw(nand_dev_desc + curr_device, cmd, off, size,
+ &total, (u_char*)addr);
- printf(" %d bytes %s: %s\n", size,
- i ? "read" : "written", ret ? "ERROR" : "OK");
+ printf (" %d bytes %s: %s\n", total,
+ (cmd & NANDRW_READ) ? "read" : "written",
+ ret ? "ERROR" : "OK");
- return ret == 0 ? 0 : 1;
- }
-#ifdef CONFIG_MTD_NAND_UNSAFE
- if (strcmp(cmd, "markbad") == 0 || strcmp(cmd, "biterr") == 0) {
- if (argc < 3)
- goto usage;
+ return ret;
+ } else if (strcmp(argv[1],"erase") == 0 &&
+ (argc == 4 || strcmp("clean", argv[2]) == 0)) {
+ int clean = argc == 5;
+ ulong off = simple_strtoul(argv[2 + clean], NULL, 16);
+ ulong size = simple_strtoul(argv[3 + clean], NULL, 16);
+ int ret;
- i = strcmp(cmd, "biterr") == 0;
+ printf ("\nNAND erase: device %d offset %ld, size %ld ... ",
+ curr_device, off, size);
- off = (int)simple_strtoul(argv[2], NULL, 16);
+ ret = nand_erase (nand_dev_desc + curr_device, off, size, clean);
- if (i)
- ret = nand_make_bit_error(nand, off);
- else
- ret = nand_mark_bad(nand, off);
+ printf("%s\n", ret ? "ERROR" : "OK");
- return ret == 0 ? 0 : 1;
+ return ret;
+ } else {
+ printf ("Usage:\n%s\n", cmdtp->usage);
+ rcode = 1;
}
-#endif
-usage:
- printf("Usage:\n%s\n", cmdtp->usage);
- return 1;
+ return rcode;
+ }
}
-U_BOOT_CMD(nand, 5, 1, do_nand,
+U_BOOT_CMD(
+ nand, 5, 1, do_nand,
"nand - NAND sub-system\n",
- "info - show available NAND devices\n"
- "nand device [dev] - show or set current device\n"
- "nand read[.jffs2] - addr off size\n"
- "nand write[.jffs2] - addr off size - read/write `size' bytes starting\n"
+ "info - show available NAND devices\n"
+ "nand device [dev] - show or set current device\n"
+ "nand read[.jffs2[s]] addr off size\n"
+ "nand write[.jffs2] addr off size - read/write `size' bytes starting\n"
" at offset `off' to/from memory address `addr'\n"
"nand erase [clean] [off size] - erase `size' bytes from\n"
" offset `off' (entire device if not specified)\n"
"nand bad - show bad blocks\n"
- "nand dump[.oob] off - dump page\n"
- "nand scrub - really clean NAND erasing bad blocks (UNSAFE)\n"
- "nand markbad off - mark bad block at offset (UNSAFE)\n"
- "nand biterr off - make a bit error at offset (UNSAFE)\n");
+ "nand read.oob addr off size - read out-of-band data\n"
+ "nand write.oob addr off size - read out-of-band data\n"
+);
-int do_nandboot(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
+int do_nandboot (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
char *boot_device = NULL;
char *ep;
int dev;
- int r;
- ulong addr, cnt, offset = 0;
+ ulong cnt;
+ ulong addr;
+ ulong offset = 0;
image_header_t *hdr;
- nand_info_t *nand;
-
+ int rcode = 0;
switch (argc) {
case 1:
addr = CFG_LOAD_ADDR;
- boot_device = getenv("bootdevice");
+ boot_device = getenv ("bootdevice");
break;
case 2:
addr = simple_strtoul(argv[1], NULL, 16);
- boot_device = getenv("bootdevice");
+ boot_device = getenv ("bootdevice");
break;
case 3:
addr = simple_strtoul(argv[1], NULL, 16);
offset = simple_strtoul(argv[3], NULL, 16);
break;
default:
- printf("Usage:\n%s\n", cmdtp->usage);
- SHOW_BOOT_PROGRESS(-1);
+ printf ("Usage:\n%s\n", cmdtp->usage);
+ SHOW_BOOT_PROGRESS (-1);
return 1;
}
if (!boot_device) {
- puts("\n** No boot device **\n");
- SHOW_BOOT_PROGRESS(-1);
+ puts ("\n** No boot device **\n");
+ SHOW_BOOT_PROGRESS (-1);
return 1;
}
dev = simple_strtoul(boot_device, &ep, 16);
- if (dev < 0 || dev >= CFG_MAX_NAND_DEVICE || !nand_info[dev].name) {
- printf("\n** Device %d not available\n", dev);
- SHOW_BOOT_PROGRESS(-1);
+ if ((dev >= CFG_MAX_NAND_DEVICE) ||
+ (nand_dev_desc[dev].ChipID == NAND_ChipID_UNKNOWN)) {
+ printf ("\n** Device %d not available\n", dev);
+ SHOW_BOOT_PROGRESS (-1);
return 1;
}
- nand = &nand_info[dev];
- printf("\nLoading from device %d: %s (offset 0x%lx)\n",
- dev, nand->name, offset);
+ printf ("\nLoading from device %d: %s at 0x%lx (offset 0x%lx)\n",
+ dev, nand_dev_desc[dev].name, nand_dev_desc[dev].IO_ADDR,
+ offset);
- cnt = nand->oobblock;
- r = nand_read(nand, offset, &cnt, (u_char *) addr);
- if (r) {
- printf("** Read error on %d\n", dev);
- SHOW_BOOT_PROGRESS(-1);
+ if (nand_rw (nand_dev_desc + dev, NANDRW_READ, offset,
+ SECTORSIZE, NULL, (u_char *)addr)) {
+ printf ("** Read error on %d\n", dev);
+ SHOW_BOOT_PROGRESS (-1);
return 1;
}
- hdr = (image_header_t *) addr;
+ hdr = (image_header_t *)addr;
- if (ntohl(hdr->ih_magic) != IH_MAGIC) {
- printf("\n** Bad Magic Number 0x%x **\n", hdr->ih_magic);
- SHOW_BOOT_PROGRESS(-1);
- return 1;
- }
+ if (ntohl(hdr->ih_magic) == IH_MAGIC) {
- print_image_hdr(hdr);
+ print_image_hdr (hdr);
- cnt = (ntohl(hdr->ih_size) + sizeof (image_header_t));
+ cnt = (ntohl(hdr->ih_size) + sizeof(image_header_t));
+ cnt -= SECTORSIZE;
+ } else {
+ printf ("\n** Bad Magic Number 0x%x **\n", hdr->ih_magic);
+ SHOW_BOOT_PROGRESS (-1);
+ return 1;
+ }
- r = nand_read(nand, offset, &cnt, (u_char *) addr);
- if (r) {
- printf("** Read error on %d\n", dev);
- SHOW_BOOT_PROGRESS(-1);
+ if (nand_rw (nand_dev_desc + dev, NANDRW_READ, offset + SECTORSIZE, cnt,
+ NULL, (u_char *)(addr+SECTORSIZE))) {
+ printf ("** Read error on %d\n", dev);
+ SHOW_BOOT_PROGRESS (-1);
return 1;
}
load_addr = addr;
/* Check if we should attempt an auto-start */
- if (((ep = getenv("autostart")) != NULL) && (strcmp(ep, "yes") == 0)) {
+ if (((ep = getenv("autostart")) != NULL) && (strcmp(ep,"yes") == 0)) {
char *local_args[2];
- extern int do_bootm(cmd_tbl_t *, int, int, char *[]);
+ extern int do_bootm (cmd_tbl_t *, int, int, char *[]);
local_args[0] = argv[0];
local_args[1] = NULL;
- printf("Automatic boot of image at addr 0x%08lx ...\n", addr);
+ printf ("Automatic boot of image at addr 0x%08lx ...\n", addr);
+
+ do_bootm (cmdtp, 0, 1, local_args);
+ rcode = 1;
+ }
+ return rcode;
+}
+
+U_BOOT_CMD(
+ nboot, 4, 1, do_nandboot,
+ "nboot - boot from NAND device\n",
+ "loadAddr dev\n"
+);
- do_bootm(cmdtp, 0, 1, local_args);
+/* returns 0 if block containing pos is OK:
+ * valid erase block and
+ * not marked bad, or no bad mark position is specified
+ * returns 1 if marked bad or otherwise invalid
+ */
+int check_block (struct nand_chip *nand, unsigned long pos)
+{
+ int retlen;
+ uint8_t oob_data;
+ uint16_t oob_data16[6];
+ int page0 = pos & (-nand->erasesize);
+ int page1 = page0 + nand->oobblock;
+ int badpos = oob_config.badblock_pos;
+
+ if (pos >= nand->totlen)
return 1;
+
+ if (badpos < 0)
+ return 0; /* no way to check, assume OK */
+
+ if (nand->bus16) {
+ if (nand_read_oob(nand, (page0 + 0), 12, &retlen, (uint8_t *)oob_data16)
+ || (oob_data16[2] & 0xff00) != 0xff00)
+ return 1;
+ if (nand_read_oob(nand, (page1 + 0), 12, &retlen, (uint8_t *)oob_data16)
+ || (oob_data16[2] & 0xff00) != 0xff00)
+ return 1;
+ } else {
+ /* Note - bad block marker can be on first or second page */
+ if (nand_read_oob(nand, page0 + badpos, 1, &retlen, &oob_data)
+ || oob_data != 0xff
+ || nand_read_oob (nand, page1 + badpos, 1, &retlen, &oob_data)
+ || oob_data != 0xff)
+ return 1;
}
+
return 0;
}
-U_BOOT_CMD(nboot, 4, 1, do_nandboot,
- "nboot - boot from NAND device\n", "loadAddr dev\n");
+/* print bad blocks in NAND flash */
+static void nand_print_bad(struct nand_chip* nand)
+{
+ unsigned long pos;
+
+ for (pos = 0; pos < nand->totlen; pos += nand->erasesize) {
+ if (check_block(nand, pos))
+ printf(" 0x%8.8lx\n", pos);
+ }
+ puts("\n");
+}
+
+/* cmd: 0: NANDRW_WRITE write, fail on bad block
+ * 1: NANDRW_READ read, fail on bad block
+ * 2: NANDRW_WRITE | NANDRW_JFFS2 write, skip bad blocks
+ * 3: NANDRW_READ | NANDRW_JFFS2 read, data all 0xff for bad blocks
+ * 7: NANDRW_READ | NANDRW_JFFS2 | NANDRW_JFFS2_SKIP read, skip bad blocks
+ */
+int nand_rw (struct nand_chip* nand, int cmd,
+ size_t start, size_t len,
+ size_t * retlen, u_char * buf)
+{
+ int ret = 0, n, total = 0;
+ char eccbuf[6];
+ /* eblk (once set) is the start of the erase block containing the
+ * data being processed.
+ */
+ unsigned long eblk = ~0; /* force mismatch on first pass */
+ unsigned long erasesize = nand->erasesize;
+
+ while (len) {
+ if ((start & (-erasesize)) != eblk) {
+ /* have crossed into new erase block, deal with
+ * it if it is sure marked bad.
+ */
+ eblk = start & (-erasesize); /* start of block */
+ if (check_block(nand, eblk)) {
+ if (cmd == (NANDRW_READ | NANDRW_JFFS2)) {
+ while (len > 0 &&
+ start - eblk < erasesize) {
+ *(buf++) = 0xff;
+ ++start;
+ ++total;
+ --len;
+ }
+ continue;
+ } else if (cmd == (NANDRW_READ | NANDRW_JFFS2 | NANDRW_JFFS2_SKIP)) {
+ start += erasesize;
+ continue;
+ } else if (cmd == (NANDRW_WRITE | NANDRW_JFFS2)) {
+ /* skip bad block */
+ start += erasesize;
+ continue;
+ } else {
+ ret = 1;
+ break;
+ }
+ }
+ }
+ /* The ECC will not be calculated correctly if
+ less than 512 is written or read */
+ /* Is request at least 512 bytes AND it starts on a proper boundry */
+ if((start != ROUND_DOWN(start, 0x200)) || (len < 0x200))
+ printf("Warning block writes should be at least 512 bytes and start on a 512 byte boundry\n");
+
+ if (cmd & NANDRW_READ) {
+ ret = nand_read_ecc(nand, start,
+ min(len, eblk + erasesize - start),
+ &n, (u_char*)buf, eccbuf);
+ } else {
+ ret = nand_write_ecc(nand, start,
+ min(len, eblk + erasesize - start),
+ &n, (u_char*)buf, eccbuf);
+ }
+
+ if (ret)
+ break;
+
+ start += n;
+ buf += n;
+ total += n;
+ len -= n;
+ }
+ if (retlen)
+ *retlen = total;
+
+ return ret;
+}
+
+static void nand_print(struct nand_chip *nand)
+{
+ if (nand->numchips > 1) {
+ printf("%s at 0x%lx,\n"
+ "\t %d chips %s, size %d MB, \n"
+ "\t total size %ld MB, sector size %ld kB\n",
+ nand->name, nand->IO_ADDR, nand->numchips,
+ nand->chips_name, 1 << (nand->chipshift - 20),
+ nand->totlen >> 20, nand->erasesize >> 10);
+ }
+ else {
+ printf("%s at 0x%lx (", nand->chips_name, nand->IO_ADDR);
+ print_size(nand->totlen, ", ");
+ print_size(nand->erasesize, " sector)\n");
+ }
+}
+
+/* ------------------------------------------------------------------------- */
+
+static int NanD_WaitReady(struct nand_chip *nand, int ale_wait)
+{
+ /* This is inline, to optimise the common case, where it's ready instantly */
+ int ret = 0;
+
+#ifdef NAND_NO_RB /* in config file, shorter delays currently wrap accesses */
+ if(ale_wait)
+ NAND_WAIT_READY(nand); /* do the worst case 25us wait */
+ else
+ udelay(10);
+#else /* has functional r/b signal */
+ NAND_WAIT_READY(nand);
+#endif
+ return ret;
+}
+
+/* NanD_Command: Send a flash command to the flash chip */
+
+static inline int NanD_Command(struct nand_chip *nand, unsigned char command)
+{
+ unsigned long nandptr = nand->IO_ADDR;
+
+ /* Assert the CLE (Command Latch Enable) line to the flash chip */
+ NAND_CTL_SETCLE(nandptr);
+
+ /* Send the command */
+ WRITE_NAND_COMMAND(command, nandptr);
+
+ /* Lower the CLE line */
+ NAND_CTL_CLRCLE(nandptr);
+
+#ifdef NAND_NO_RB
+ if(command == NAND_CMD_RESET){
+ u_char ret_val;
+ NanD_Command(nand, NAND_CMD_STATUS);
+ do {
+ ret_val = READ_NAND(nandptr);/* wait till ready */
+ } while((ret_val & 0x40) != 0x40);
+ }
+#endif
+ return NanD_WaitReady(nand, 0);
+}
+
+/* NanD_Address: Set the current address for the flash chip */
+
+static int NanD_Address(struct nand_chip *nand, int numbytes, unsigned long ofs)
+{
+ unsigned long nandptr;
+ int i;
+
+ nandptr = nand->IO_ADDR;
+
+ /* Assert the ALE (Address Latch Enable) line to the flash chip */
+ NAND_CTL_SETALE(nandptr);
+
+ /* Send the address */
+ /* Devices with 256-byte page are addressed as:
+ * Column (bits 0-7), Page (bits 8-15, 16-23, 24-31)
+ * there is no device on the market with page256
+ * and more than 24 bits.
+ * Devices with 512-byte page are addressed as:
+ * Column (bits 0-7), Page (bits 9-16, 17-24, 25-31)
+ * 25-31 is sent only if the chip support it.
+ * bit 8 changes the read command to be sent
+ * (NAND_CMD_READ0 or NAND_CMD_READ1).
+ */
+
+ if (numbytes == ADDR_COLUMN || numbytes == ADDR_COLUMN_PAGE)
+ WRITE_NAND_ADDRESS(ofs, nandptr);
+
+ ofs = ofs >> nand->page_shift;
+
+ if (numbytes == ADDR_PAGE || numbytes == ADDR_COLUMN_PAGE) {
+ for (i = 0; i < nand->pageadrlen; i++, ofs = ofs >> 8) {
+ WRITE_NAND_ADDRESS(ofs, nandptr);
+ }
+ }
+
+ /* Lower the ALE line */
+ NAND_CTL_CLRALE(nandptr);
+
+ /* Wait for the chip to respond */
+ return NanD_WaitReady(nand, 1);
+}
+
+/* NanD_SelectChip: Select a given flash chip within the current floor */
+
+static inline int NanD_SelectChip(struct nand_chip *nand, int chip)
+{
+ /* Wait for it to be ready */
+ return NanD_WaitReady(nand, 0);
+}
+
+/* NanD_IdentChip: Identify a given NAND chip given {floor,chip} */
+
+static int NanD_IdentChip(struct nand_chip *nand, int floor, int chip)
+{
+ int mfr, id, i;
+
+ NAND_ENABLE_CE(nand); /* set pin low */
+ /* Reset the chip */
+ if (NanD_Command(nand, NAND_CMD_RESET)) {
+#ifdef NAND_DEBUG
+ printf("NanD_Command (reset) for %d,%d returned true\n",
+ floor, chip);
+#endif
+ NAND_DISABLE_CE(nand); /* set pin high */
+ return 0;
+ }
+
+ /* Read the NAND chip ID: 1. Send ReadID command */
+ if (NanD_Command(nand, NAND_CMD_READID)) {
+#ifdef NAND_DEBUG
+ printf("NanD_Command (ReadID) for %d,%d returned true\n",
+ floor, chip);
+#endif
+ NAND_DISABLE_CE(nand); /* set pin high */
+ return 0;
+ }
+
+ /* Read the NAND chip ID: 2. Send address byte zero */
+ NanD_Address(nand, ADDR_COLUMN, 0);
+
+ /* Read the manufacturer and device id codes from the device */
+
+ mfr = READ_NAND(nand->IO_ADDR);
+
+ id = READ_NAND(nand->IO_ADDR);
+
+ NAND_DISABLE_CE(nand); /* set pin high */
+
+#ifdef NAND_DEBUG
+ printf("NanD_Command (ReadID) got %x %x\n", mfr, id);
+#endif
+ if (mfr == 0xff || mfr == 0) {
+ /* No response - return failure */
+ return 0;
+ }
+
+ /* Check it's the same as the first chip we identified.
+ * M-Systems say that any given nand_chip device should only
+ * contain _one_ type of flash part, although that's not a
+ * hardware restriction. */
+ if (nand->mfr) {
+ if (nand->mfr == mfr && nand->id == id) {
+ return 1; /* This is another the same the first */
+ } else {
+ printf("Flash chip at floor %d, chip %d is different:\n",
+ floor, chip);
+ }
+ }
+
+ /* Print and store the manufacturer and ID codes. */
+ for (i = 0; nand_flash_ids[i].name != NULL; i++) {
+ if (mfr == nand_flash_ids[i].manufacture_id &&
+ id == nand_flash_ids[i].model_id) {
+#ifdef NAND_DEBUG
+ printf("Flash chip found:\n\t Manufacturer ID: 0x%2.2X, "
+ "Chip ID: 0x%2.2X (%s)\n", mfr, id,
+ nand_flash_ids[i].name);
+#endif
+ if (!nand->mfr) {
+ nand->mfr = mfr;
+ nand->id = id;
+ nand->chipshift =
+ nand_flash_ids[i].chipshift;
+ nand->page256 = nand_flash_ids[i].page256;
+ nand->eccsize = 256;
+ if (nand->page256) {
+ nand->oobblock = 256;
+ nand->oobsize = 8;
+ nand->page_shift = 8;
+ } else {
+ nand->oobblock = 512;
+ nand->oobsize = 16;
+ nand->page_shift = 9;
+ }
+ nand->pageadrlen = nand_flash_ids[i].pageadrlen;
+ nand->erasesize = nand_flash_ids[i].erasesize;
+ nand->chips_name = nand_flash_ids[i].name;
+ nand->bus16 = nand_flash_ids[i].bus16;
+ return 1;
+ }
+ return 0;
+ }
+ }
+
+
+#ifdef NAND_DEBUG
+ /* We haven't fully identified the chip. Print as much as we know. */
+ printf("Unknown flash chip found: %2.2X %2.2X\n",
+ id, mfr);
+#endif
+
+ return 0;
+}
+
+/* NanD_ScanChips: Find all NAND chips present in a nand_chip, and identify them */
+
+static void NanD_ScanChips(struct nand_chip *nand)
+{
+ int floor, chip;
+ int numchips[NAND_MAX_FLOORS];
+ int maxchips = NAND_MAX_CHIPS;
+ int ret = 1;
+
+ nand->numchips = 0;
+ nand->mfr = 0;
+ nand->id = 0;
+
+
+ /* For each floor, find the number of valid chips it contains */
+ for (floor = 0; floor < NAND_MAX_FLOORS; floor++) {
+ ret = 1;
+ numchips[floor] = 0;
+ for (chip = 0; chip < maxchips && ret != 0; chip++) {
+
+ ret = NanD_IdentChip(nand, floor, chip);
+ if (ret) {
+ numchips[floor]++;
+ nand->numchips++;
+ }
+ }
+ }
+
+ /* If there are none at all that we recognise, bail */
+ if (!nand->numchips) {
+#ifdef NAND_DEBUG
+ puts ("No NAND flash chips recognised.\n");
+#endif
+ return;
+ }
+
+ /* Allocate an array to hold the information for each chip */
+ nand->chips = malloc(sizeof(struct Nand) * nand->numchips);
+ if (!nand->chips) {
+ puts ("No memory for allocating chip info structures\n");
+ return;
+ }
+
+ ret = 0;
+
+ /* Fill out the chip array with {floor, chipno} for each
+ * detected chip in the device. */
+ for (floor = 0; floor < NAND_MAX_FLOORS; floor++) {
+ for (chip = 0; chip < numchips[floor]; chip++) {
+ nand->chips[ret].floor = floor;
+ nand->chips[ret].chip = chip;
+ nand->chips[ret].curadr = 0;
+ nand->chips[ret].curmode = 0x50;
+ ret++;
+ }
+ }
+
+ /* Calculate and print the total size of the device */
+ nand->totlen = nand->numchips * (1 << nand->chipshift);
+
+#ifdef NAND_DEBUG
+ printf("%d flash chips found. Total nand_chip size: %ld MB\n",
+ nand->numchips, nand->totlen >> 20);
+#endif
+}
+
+/* we need to be fast here, 1 us per read translates to 1 second per meg */
+static void NanD_ReadBuf (struct nand_chip *nand, u_char * data_buf, int cntr)
+{
+ unsigned long nandptr = nand->IO_ADDR;
+
+ NanD_Command (nand, NAND_CMD_READ0);
+
+ if (nand->bus16) {
+ u16 val;
+
+ while (cntr >= 16) {
+ val = READ_NAND (nandptr);
+ *data_buf++ = val & 0xff;
+ *data_buf++ = val >> 8;
+ val = READ_NAND (nandptr);
+ *data_buf++ = val & 0xff;
+ *data_buf++ = val >> 8;
+ val = READ_NAND (nandptr);
+ *data_buf++ = val & 0xff;
+ *data_buf++ = val >> 8;
+ val = READ_NAND (nandptr);
+ *data_buf++ = val & 0xff;
+ *data_buf++ = val >> 8;
+ val = READ_NAND (nandptr);
+ *data_buf++ = val & 0xff;
+ *data_buf++ = val >> 8;
+ val = READ_NAND (nandptr);
+ *data_buf++ = val & 0xff;
+ *data_buf++ = val >> 8;
+ val = READ_NAND (nandptr);
+ *data_buf++ = val & 0xff;
+ *data_buf++ = val >> 8;
+ val = READ_NAND (nandptr);
+ *data_buf++ = val & 0xff;
+ *data_buf++ = val >> 8;
+ cntr -= 16;
+ }
+
+ while (cntr > 0) {
+ val = READ_NAND (nandptr);
+ *data_buf++ = val & 0xff;
+ *data_buf++ = val >> 8;
+ cntr -= 2;
+ }
+ } else {
+ while (cntr >= 16) {
+ *data_buf++ = READ_NAND (nandptr);
+ *data_buf++ = READ_NAND (nandptr);
+ *data_buf++ = READ_NAND (nandptr);
+ *data_buf++ = READ_NAND (nandptr);
+ *data_buf++ = READ_NAND (nandptr);
+ *data_buf++ = READ_NAND (nandptr);
+ *data_buf++ = READ_NAND (nandptr);
+ *data_buf++ = READ_NAND (nandptr);
+ *data_buf++ = READ_NAND (nandptr);
+ *data_buf++ = READ_NAND (nandptr);
+ *data_buf++ = READ_NAND (nandptr);
+ *data_buf++ = READ_NAND (nandptr);
+ *data_buf++ = READ_NAND (nandptr);
+ *data_buf++ = READ_NAND (nandptr);
+ *data_buf++ = READ_NAND (nandptr);
+ *data_buf++ = READ_NAND (nandptr);
+ cntr -= 16;
+ }
+
+ while (cntr > 0) {
+ *data_buf++ = READ_NAND (nandptr);
+ cntr--;
+ }
+ }
+}
+
+/*
+ * NAND read with ECC
+ */
+static int nand_read_ecc(struct nand_chip *nand, size_t start, size_t len,
+ size_t * retlen, u_char *buf, u_char *ecc_code)
+{
+ int col, page;
+ int ecc_status = 0;
+#ifdef CONFIG_MTD_NAND_ECC
+ int j;
+ int ecc_failed = 0;
+ u_char *data_poi;
+ u_char ecc_calc[6];
+#endif
+
+ /* Do not allow reads past end of device */
+ if ((start + len) > nand->totlen) {
+ printf ("%s: Attempt read beyond end of device %x %x %x\n",
+ __FUNCTION__, (uint) start, (uint) len, (uint) nand->totlen);
+ *retlen = 0;
+ return -1;
+ }
+
+ /* First we calculate the starting page */
+ /*page = shr(start, nand->page_shift);*/
+ page = start >> nand->page_shift;
+
+ /* Get raw starting column */
+ col = start & (nand->oobblock - 1);
+
+ /* Initialize return value */
+ *retlen = 0;
+
+ /* Select the NAND device */
+ NAND_ENABLE_CE(nand); /* set pin low */
+
+ /* Loop until all data read */
+ while (*retlen < len) {
+
+#ifdef CONFIG_MTD_NAND_ECC
+ /* Do we have this page in cache ? */
+ if (nand->cache_page == page)
+ goto readdata;
+ /* Send the read command */
+ NanD_Command(nand, NAND_CMD_READ0);
+ if (nand->bus16) {
+ NanD_Address(nand, ADDR_COLUMN_PAGE,
+ (page << nand->page_shift) + (col >> 1));
+ } else {
+ NanD_Address(nand, ADDR_COLUMN_PAGE,
+ (page << nand->page_shift) + col);
+ }
+
+ /* Read in a page + oob data */
+ NanD_ReadBuf(nand, nand->data_buf, nand->oobblock + nand->oobsize);
+
+ /* copy data into cache, for read out of cache and if ecc fails */
+ if (nand->data_cache) {
+ memcpy (nand->data_cache, nand->data_buf,
+ nand->oobblock + nand->oobsize);
+ }
+
+ /* Pick the ECC bytes out of the oob data */
+ for (j = 0; j < 6; j++) {
+ ecc_code[j] = nand->data_buf[(nand->oobblock + oob_config.ecc_pos[j])];
+ }
+
+ /* Calculate the ECC and verify it */
+ /* If block was not written with ECC, skip ECC */
+ if (oob_config.eccvalid_pos != -1 &&
+ (nand->data_buf[nand->oobblock + oob_config.eccvalid_pos] & 0x0f) != 0x0f) {
+
+ nand_calculate_ecc (&nand->data_buf[0], &ecc_calc[0]);
+ switch (nand_correct_data (&nand->data_buf[0], &ecc_code[0], &ecc_calc[0])) {
+ case -1:
+ printf ("%s: Failed ECC read, page 0x%08x\n", __FUNCTION__, page);
+ ecc_failed++;
+ break;
+ case 1:
+ case 2: /* transfer ECC corrected data to cache */
+ if (nand->data_cache)
+ memcpy (nand->data_cache, nand->data_buf, 256);
+ break;
+ }
+ }
+
+ if (oob_config.eccvalid_pos != -1 &&
+ nand->oobblock == 512 && (nand->data_buf[nand->oobblock + oob_config.eccvalid_pos] & 0xf0) != 0xf0) {
+
+ nand_calculate_ecc (&nand->data_buf[256], &ecc_calc[3]);
+ switch (nand_correct_data (&nand->data_buf[256], &ecc_code[3], &ecc_calc[3])) {
+ case -1:
+ printf ("%s: Failed ECC read, page 0x%08x\n", __FUNCTION__, page);
+ ecc_failed++;
+ break;
+ case 1:
+ case 2: /* transfer ECC corrected data to cache */
+ if (nand->data_cache)
+ memcpy (&nand->data_cache[256], &nand->data_buf[256], 256);
+ break;
+ }
+ }
+readdata:
+ /* Read the data from ECC data buffer into return buffer */
+ data_poi = (nand->data_cache) ? nand->data_cache : nand->data_buf;
+ data_poi += col;
+ if ((*retlen + (nand->oobblock - col)) >= len) {
+ memcpy (buf + *retlen, data_poi, len - *retlen);
+ *retlen = len;
+ } else {
+ memcpy (buf + *retlen, data_poi, nand->oobblock - col);
+ *retlen += nand->oobblock - col;
+ }
+ /* Set cache page address, invalidate, if ecc_failed */
+ nand->cache_page = (nand->data_cache && !ecc_failed) ? page : -1;
+
+ ecc_status += ecc_failed;
+ ecc_failed = 0;
+
+#else
+ /* Send the read command */
+ NanD_Command(nand, NAND_CMD_READ0);
+ if (nand->bus16) {
+ NanD_Address(nand, ADDR_COLUMN_PAGE,
+ (page << nand->page_shift) + (col >> 1));
+ } else {
+ NanD_Address(nand, ADDR_COLUMN_PAGE,
+ (page << nand->page_shift) + col);
+ }
+
+ /* Read the data directly into the return buffer */
+ if ((*retlen + (nand->oobblock - col)) >= len) {
+ NanD_ReadBuf(nand, buf + *retlen, len - *retlen);
+ *retlen = len;
+ /* We're done */
+ continue;
+ } else {
+ NanD_ReadBuf(nand, buf + *retlen, nand->oobblock - col);
+ *retlen += nand->oobblock - col;
+ }
+#endif
+ /* For subsequent reads align to page boundary. */
+ col = 0;
+ /* Increment page address */
+ page++;
+ }
+
+ /* De-select the NAND device */
+ NAND_DISABLE_CE(nand); /* set pin high */
+
+ /*
+ * Return success, if no ECC failures, else -EIO
+ * fs driver will take care of that, because
+ * retlen == desired len and result == -EIO
+ */
+ return ecc_status ? -1 : 0;
+}
+
+/*
+ * Nand_page_program function is used for write and writev !
+ */
+static int nand_write_page (struct nand_chip *nand,
+ int page, int col, int last, u_char * ecc_code)
+{
+
+ int i;
+ unsigned long nandptr = nand->IO_ADDR;
+
+#ifdef CONFIG_MTD_NAND_ECC
+#ifdef CONFIG_MTD_NAND_VERIFY_WRITE
+ int ecc_bytes = (nand->oobblock == 512) ? 6 : 3;
+#endif
+#endif
+ /* pad oob area */
+ for (i = nand->oobblock; i < nand->oobblock + nand->oobsize; i++)
+ nand->data_buf[i] = 0xff;
+
+#ifdef CONFIG_MTD_NAND_ECC
+ /* Zero out the ECC array */
+ for (i = 0; i < 6; i++)
+ ecc_code[i] = 0x00;
+
+ /* Read back previous written data, if col > 0 */
+ if (col) {
+ NanD_Command (nand, NAND_CMD_READ0);
+ if (nand->bus16) {
+ NanD_Address (nand, ADDR_COLUMN_PAGE,
+ (page << nand->page_shift) + (col >> 1));
+ } else {
+ NanD_Address (nand, ADDR_COLUMN_PAGE,
+ (page << nand->page_shift) + col);
+ }
+
+ if (nand->bus16) {
+ u16 val;
+
+ for (i = 0; i < col; i += 2) {
+ val = READ_NAND (nandptr);
+ nand->data_buf[i] = val & 0xff;
+ nand->data_buf[i + 1] = val >> 8;
+ }
+ } else {
+ for (i = 0; i < col; i++)
+ nand->data_buf[i] = READ_NAND (nandptr);
+ }
+ }
+
+ /* Calculate and write the ECC if we have enough data */
+ if ((col < nand->eccsize) && (last >= nand->eccsize)) {
+ nand_calculate_ecc (&nand->data_buf[0], &(ecc_code[0]));
+ for (i = 0; i < 3; i++) {
+ nand->data_buf[(nand->oobblock +
+ oob_config.ecc_pos[i])] = ecc_code[i];
+ }
+ if (oob_config.eccvalid_pos != -1) {
+ nand->data_buf[nand->oobblock +
+ oob_config.eccvalid_pos] = 0xf0;
+ }
+ }
+
+ /* Calculate and write the second ECC if we have enough data */
+ if ((nand->oobblock == 512) && (last == nand->oobblock)) {
+ nand_calculate_ecc (&nand->data_buf[256], &(ecc_code[3]));
+ for (i = 3; i < 6; i++) {
+ nand->data_buf[(nand->oobblock +
+ oob_config.ecc_pos[i])] = ecc_code[i];
+ }
+ if (oob_config.eccvalid_pos != -1) {
+ nand->data_buf[nand->oobblock +
+ oob_config.eccvalid_pos] &= 0x0f;
+ }
+ }
+#endif
+ /* Prepad for partial page programming !!! */
+ for (i = 0; i < col; i++)
+ nand->data_buf[i] = 0xff;
+
+ /* Postpad for partial page programming !!! oob is already padded */
+ for (i = last; i < nand->oobblock; i++)
+ nand->data_buf[i] = 0xff;
+
+ /* Send command to begin auto page programming */
+ NanD_Command (nand, NAND_CMD_READ0);
+ NanD_Command (nand, NAND_CMD_SEQIN);
+ if (nand->bus16) {
+ NanD_Address (nand, ADDR_COLUMN_PAGE,
+ (page << nand->page_shift) + (col >> 1));
+ } else {
+ NanD_Address (nand, ADDR_COLUMN_PAGE,
+ (page << nand->page_shift) + col);
+ }
+
+ /* Write out complete page of data */
+ if (nand->bus16) {
+ for (i = 0; i < (nand->oobblock + nand->oobsize); i += 2) {
+ WRITE_NAND (nand->data_buf[i] +
+ (nand->data_buf[i + 1] << 8),
+ nand->IO_ADDR);
+ }
+ } else {
+ for (i = 0; i < (nand->oobblock + nand->oobsize); i++)
+ WRITE_NAND (nand->data_buf[i], nand->IO_ADDR);
+ }
+
+ /* Send command to actually program the data */
+ NanD_Command (nand, NAND_CMD_PAGEPROG);
+ NanD_Command (nand, NAND_CMD_STATUS);
+#ifdef NAND_NO_RB
+ {
+ u_char ret_val;
+
+ do {
+ ret_val = READ_NAND (nandptr); /* wait till ready */
+ } while ((ret_val & 0x40) != 0x40);
+ }
+#endif
+ /* See if device thinks it succeeded */
+ if (READ_NAND (nand->IO_ADDR) & 0x01) {
+ printf ("%s: Failed write, page 0x%08x, ", __FUNCTION__,
+ page);
+ return -1;
+ }
+#ifdef CONFIG_MTD_NAND_VERIFY_WRITE
+ /*
+ * The NAND device assumes that it is always writing to
+ * a cleanly erased page. Hence, it performs its internal
+ * write verification only on bits that transitioned from
+ * 1 to 0. The device does NOT verify the whole page on a
+ * byte by byte basis. It is possible that the page was
+ * not completely erased or the page is becoming unusable
+ * due to wear. The read with ECC would catch the error
+ * later when the ECC page check fails, but we would rather
+ * catch it early in the page write stage. Better to write
+ * no data than invalid data.
+ */
+
+ /* Send command to read back the page */
+ if (col < nand->eccsize)
+ NanD_Command (nand, NAND_CMD_READ0);
+ else
+ NanD_Command (nand, NAND_CMD_READ1);
+ if (nand->bus16) {
+ NanD_Address (nand, ADDR_COLUMN_PAGE,
+ (page << nand->page_shift) + (col >> 1));
+ } else {
+ NanD_Address (nand, ADDR_COLUMN_PAGE,
+ (page << nand->page_shift) + col);
+ }
+
+ /* Loop through and verify the data */
+ if (nand->bus16) {
+ for (i = col; i < last; i = +2) {
+ if ((nand->data_buf[i] +
+ (nand->data_buf[i + 1] << 8)) != READ_NAND (nand->IO_ADDR)) {
+ printf ("%s: Failed write verify, page 0x%08x ",
+ __FUNCTION__, page);
+ return -1;
+ }
+ }
+ } else {
+ for (i = col; i < last; i++) {
+ if (nand->data_buf[i] != READ_NAND (nand->IO_ADDR)) {
+ printf ("%s: Failed write verify, page 0x%08x ",
+ __FUNCTION__, page);
+ return -1;
+ }
+ }
+ }
+
+#ifdef CONFIG_MTD_NAND_ECC
+ /*
+ * We also want to check that the ECC bytes wrote
+ * correctly for the same reasons stated above.
+ */
+ NanD_Command (nand, NAND_CMD_READOOB);
+ if (nand->bus16) {
+ NanD_Address (nand, ADDR_COLUMN_PAGE,
+ (page << nand->page_shift) + (col >> 1));
+ } else {
+ NanD_Address (nand, ADDR_COLUMN_PAGE,
+ (page << nand->page_shift) + col);
+ }
+ if (nand->bus16) {
+ for (i = 0; i < nand->oobsize; i += 2) {
+ u16 val;
+
+ val = READ_NAND (nand->IO_ADDR);
+ nand->data_buf[i] = val & 0xff;
+ nand->data_buf[i + 1] = val >> 8;
+ }
+ } else {
+ for (i = 0; i < nand->oobsize; i++) {
+ nand->data_buf[i] = READ_NAND (nand->IO_ADDR);
+ }
+ }
+ for (i = 0; i < ecc_bytes; i++) {
+ if ((nand->data_buf[(oob_config.ecc_pos[i])] != ecc_code[i]) && ecc_code[i]) {
+ printf ("%s: Failed ECC write "
+ "verify, page 0x%08x, "
+ "%6i bytes were succesful\n",
+ __FUNCTION__, page, i);
+ return -1;
+ }
+ }
+#endif /* CONFIG_MTD_NAND_ECC */
+#endif /* CONFIG_MTD_NAND_VERIFY_WRITE */
+ return 0;
+}
+
+static int nand_write_ecc (struct nand_chip* nand, size_t to, size_t len,
+ size_t * retlen, const u_char * buf, u_char * ecc_code)
+{
+ int i, page, col, cnt, ret = 0;
+
+ /* Do not allow write past end of device */
+ if ((to + len) > nand->totlen) {
+ printf ("%s: Attempt to write past end of page\n", __FUNCTION__);
+ return -1;
+ }
+
+ /* Shift to get page */
+ page = ((int) to) >> nand->page_shift;
+
+ /* Get the starting column */
+ col = to & (nand->oobblock - 1);
+
+ /* Initialize return length value */
+ *retlen = 0;
+
+ /* Select the NAND device */
+#ifdef CONFIG_OMAP1510
+ archflashwp(0,0);
+#endif
+#ifdef CFG_NAND_WP
+ NAND_WP_OFF();
+#endif
+
+ NAND_ENABLE_CE(nand); /* set pin low */
+
+ /* Check the WP bit */
+ NanD_Command(nand, NAND_CMD_STATUS);
+ if (!(READ_NAND(nand->IO_ADDR) & 0x80)) {
+ printf ("%s: Device is write protected!!!\n", __FUNCTION__);
+ ret = -1;
+ goto out;
+ }
+
+ /* Loop until all data is written */
+ while (*retlen < len) {
+ /* Invalidate cache, if we write to this page */
+ if (nand->cache_page == page)
+ nand->cache_page = -1;
+
+ /* Write data into buffer */
+ if ((col + len) >= nand->oobblock) {
+ for (i = col, cnt = 0; i < nand->oobblock; i++, cnt++) {
+ nand->data_buf[i] = buf[(*retlen + cnt)];
+ }
+ } else {
+ for (i = col, cnt = 0; cnt < (len - *retlen); i++, cnt++) {
+ nand->data_buf[i] = buf[(*retlen + cnt)];
+ }
+ }
+ /* We use the same function for write and writev !) */
+ ret = nand_write_page (nand, page, col, i, ecc_code);
+ if (ret)
+ goto out;
+
+ /* Next data start at page boundary */
+ col = 0;
+
+ /* Update written bytes count */
+ *retlen += cnt;
+
+ /* Increment page address */
+ page++;
+ }
+
+ /* Return happy */
+ *retlen = len;
+
+out:
+ /* De-select the NAND device */
+ NAND_DISABLE_CE(nand); /* set pin high */
+#ifdef CONFIG_OMAP1510
+ archflashwp(0,1);
+#endif
+#ifdef CFG_NAND_WP
+ NAND_WP_ON();
+#endif
+
+ return ret;
+}
+
+/* read from the 16 bytes of oob data that correspond to a 512 byte
+ * page or 2 256-byte pages.
+ */
+static int nand_read_oob(struct nand_chip* nand, size_t ofs, size_t len,
+ size_t * retlen, u_char * buf)
+{
+ int len256 = 0;
+ struct Nand *mychip;
+ int ret = 0;
+
+ mychip = &nand->chips[ofs >> nand->chipshift];
+
+ /* update address for 2M x 8bit devices. OOB starts on the second */
+ /* page to maintain compatibility with nand_read_ecc. */
+ if (nand->page256) {
+ if (!(ofs & 0x8))
+ ofs += 0x100;
+ else
+ ofs -= 0x8;
+ }
+
+ NAND_ENABLE_CE(nand); /* set pin low */
+ NanD_Command(nand, NAND_CMD_READOOB);
+ if (nand->bus16) {
+ NanD_Address(nand, ADDR_COLUMN_PAGE,
+ ((ofs >> nand->page_shift) << nand->page_shift) +
+ ((ofs & (nand->oobblock - 1)) >> 1));
+ } else {
+ NanD_Address(nand, ADDR_COLUMN_PAGE, ofs);
+ }
+
+ /* treat crossing 8-byte OOB data for 2M x 8bit devices */
+ /* Note: datasheet says it should automaticaly wrap to the */
+ /* next OOB block, but it didn't work here. mf. */
+ if (nand->page256 && ofs + len > (ofs | 0x7) + 1) {
+ len256 = (ofs | 0x7) + 1 - ofs;
+ NanD_ReadBuf(nand, buf, len256);
+
+ NanD_Command(nand, NAND_CMD_READOOB);
+ NanD_Address(nand, ADDR_COLUMN_PAGE, ofs & (~0x1ff));
+ }
+
+ NanD_ReadBuf(nand, &buf[len256], len - len256);
+
+ *retlen = len;
+ /* Reading the full OOB data drops us off of the end of the page,
+ * causing the flash device to go into busy mode, so we need
+ * to wait until ready 11.4.1 and Toshiba TC58256FT nands */
+
+ ret = NanD_WaitReady(nand, 1);
+ NAND_DISABLE_CE(nand); /* set pin high */
+
+ return ret;
+
+}
+
+/* write to the 16 bytes of oob data that correspond to a 512 byte
+ * page or 2 256-byte pages.
+ */
+static int nand_write_oob(struct nand_chip* nand, size_t ofs, size_t len,
+ size_t * retlen, const u_char * buf)
+{
+ int len256 = 0;
+ int i;
+ unsigned long nandptr = nand->IO_ADDR;
+
+#ifdef PSYCHO_DEBUG
+ printf("nand_write_oob(%lx, %d): %2.2X %2.2X %2.2X %2.2X ... %2.2X %2.2X .. %2.2X %2.2X\n",
+ (long)ofs, len, buf[0], buf[1], buf[2], buf[3],
+ buf[8], buf[9], buf[14],buf[15]);
+#endif
+
+ NAND_ENABLE_CE(nand); /* set pin low to enable chip */
+
+ /* Reset the chip */
+ NanD_Command(nand, NAND_CMD_RESET);
+
+ /* issue the Read2 command to set the pointer to the Spare Data Area. */
+ NanD_Command(nand, NAND_CMD_READOOB);
+ if (nand->bus16) {
+ NanD_Address(nand, ADDR_COLUMN_PAGE,
+ ((ofs >> nand->page_shift) << nand->page_shift) +
+ ((ofs & (nand->oobblock - 1)) >> 1));
+ } else {
+ NanD_Address(nand, ADDR_COLUMN_PAGE, ofs);
+ }
+
+ /* update address for 2M x 8bit devices. OOB starts on the second */
+ /* page to maintain compatibility with nand_read_ecc. */
+ if (nand->page256) {
+ if (!(ofs & 0x8))
+ ofs += 0x100;
+ else
+ ofs -= 0x8;
+ }
+
+ /* issue the Serial Data In command to initial the Page Program process */
+ NanD_Command(nand, NAND_CMD_SEQIN);
+ if (nand->bus16) {
+ NanD_Address(nand, ADDR_COLUMN_PAGE,
+ ((ofs >> nand->page_shift) << nand->page_shift) +
+ ((ofs & (nand->oobblock - 1)) >> 1));
+ } else {
+ NanD_Address(nand, ADDR_COLUMN_PAGE, ofs);
+ }
+
+ /* treat crossing 8-byte OOB data for 2M x 8bit devices */
+ /* Note: datasheet says it should automaticaly wrap to the */
+ /* next OOB block, but it didn't work here. mf. */
+ if (nand->page256 && ofs + len > (ofs | 0x7) + 1) {
+ len256 = (ofs | 0x7) + 1 - ofs;
+ for (i = 0; i < len256; i++)
+ WRITE_NAND(buf[i], nandptr);
+
+ NanD_Command(nand, NAND_CMD_PAGEPROG);
+ NanD_Command(nand, NAND_CMD_STATUS);
+#ifdef NAND_NO_RB
+ { u_char ret_val;
+ do {
+ ret_val = READ_NAND(nandptr); /* wait till ready */
+ } while ((ret_val & 0x40) != 0x40);
+ }
+#endif
+ if (READ_NAND(nandptr) & 1) {
+ puts ("Error programming oob data\n");
+ /* There was an error */
+ NAND_DISABLE_CE(nand); /* set pin high */
+ *retlen = 0;
+ return -1;
+ }
+ NanD_Command(nand, NAND_CMD_SEQIN);
+ NanD_Address(nand, ADDR_COLUMN_PAGE, ofs & (~0x1ff));
+ }
+
+ if (nand->bus16) {
+ for (i = len256; i < len; i += 2) {
+ WRITE_NAND(buf[i] + (buf[i+1] << 8), nandptr);
+ }
+ } else {
+ for (i = len256; i < len; i++)
+ WRITE_NAND(buf[i], nandptr);
+ }
+
+ NanD_Command(nand, NAND_CMD_PAGEPROG);
+ NanD_Command(nand, NAND_CMD_STATUS);
+#ifdef NAND_NO_RB
+ { u_char ret_val;
+ do {
+ ret_val = READ_NAND(nandptr); /* wait till ready */
+ } while ((ret_val & 0x40) != 0x40);
+ }
+#endif
+ if (READ_NAND(nandptr) & 1) {
+ puts ("Error programming oob data\n");
+ /* There was an error */
+ NAND_DISABLE_CE(nand); /* set pin high */
+ *retlen = 0;
+ return -1;
+ }
+
+ NAND_DISABLE_CE(nand); /* set pin high */
+ *retlen = len;
+ return 0;
+
+}
+
+int nand_erase(struct nand_chip* nand, size_t ofs, size_t len, int clean)
+{
+ /* This is defined as a structure so it will work on any system
+ * using native endian jffs2 (the default).
+ */
+ static struct jffs2_unknown_node clean_marker = {
+ JFFS2_MAGIC_BITMASK,
+ JFFS2_NODETYPE_CLEANMARKER,
+ 8 /* 8 bytes in this node */
+ };
+ unsigned long nandptr;
+ struct Nand *mychip;
+ int ret = 0;
+
+ if (ofs & (nand->erasesize-1) || len & (nand->erasesize-1)) {
+ printf ("Offset and size must be sector aligned, erasesize = %d\n",
+ (int) nand->erasesize);
+ return -1;
+ }
+
+ nandptr = nand->IO_ADDR;
+
+ /* Select the NAND device */
+#ifdef CONFIG_OMAP1510
+ archflashwp(0,0);
+#endif
+#ifdef CFG_NAND_WP
+ NAND_WP_OFF();
+#endif
+ NAND_ENABLE_CE(nand); /* set pin low */
+
+ /* Check the WP bit */
+ NanD_Command(nand, NAND_CMD_STATUS);
+ if (!(READ_NAND(nand->IO_ADDR) & 0x80)) {
+ printf ("nand_write_ecc: Device is write protected!!!\n");
+ ret = -1;
+ goto out;
+ }
+
+ /* Check the WP bit */
+ NanD_Command(nand, NAND_CMD_STATUS);
+ if (!(READ_NAND(nand->IO_ADDR) & 0x80)) {
+ printf ("%s: Device is write protected!!!\n", __FUNCTION__);
+ ret = -1;
+ goto out;
+ }
+
+ /* FIXME: Do nand in the background. Use timers or schedule_task() */
+ while(len) {
+ /*mychip = &nand->chips[shr(ofs, nand->chipshift)];*/
+ mychip = &nand->chips[ofs >> nand->chipshift];
+
+ /* always check for bad block first, genuine bad blocks
+ * should _never_ be erased.
+ */
+ if (ALLOW_ERASE_BAD_DEBUG || !check_block(nand, ofs)) {
+ /* Select the NAND device */
+ NAND_ENABLE_CE(nand); /* set pin low */
+
+ NanD_Command(nand, NAND_CMD_ERASE1);
+ NanD_Address(nand, ADDR_PAGE, ofs);
+ NanD_Command(nand, NAND_CMD_ERASE2);
+
+ NanD_Command(nand, NAND_CMD_STATUS);
+
+#ifdef NAND_NO_RB
+ { u_char ret_val;
+ do {
+ ret_val = READ_NAND(nandptr); /* wait till ready */
+ } while ((ret_val & 0x40) != 0x40);
+ }
+#endif
+ if (READ_NAND(nandptr) & 1) {
+ printf ("%s: Error erasing at 0x%lx\n",
+ __FUNCTION__, (long)ofs);
+ /* There was an error */
+ ret = -1;
+ goto out;
+ }
+ if (clean) {
+ int n; /* return value not used */
+ int p, l;
+
+ /* clean marker position and size depend
+ * on the page size, since 256 byte pages
+ * only have 8 bytes of oob data
+ */
+ if (nand->page256) {
+ p = NAND_JFFS2_OOB8_FSDAPOS;
+ l = NAND_JFFS2_OOB8_FSDALEN;
+ } else {
+ p = NAND_JFFS2_OOB16_FSDAPOS;
+ l = NAND_JFFS2_OOB16_FSDALEN;
+ }
+
+ ret = nand_write_oob(nand, ofs + p, l, &n,
+ (u_char *)&clean_marker);
+ /* quit here if write failed */
+ if (ret)
+ goto out;
+ }
+ }
+ ofs += nand->erasesize;
+ len -= nand->erasesize;
+ }
+
+out:
+ /* De-select the NAND device */
+ NAND_DISABLE_CE(nand); /* set pin high */
+#ifdef CONFIG_OMAP1510
+ archflashwp(0,1);
+#endif
+#ifdef CFG_NAND_WP
+ NAND_WP_ON();
+#endif
+
+ return ret;
+}
+
+static inline int nandcheck(unsigned long potential, unsigned long physadr)
+{
+ return 0;
+}
+
+unsigned long nand_probe(unsigned long physadr)
+{
+ struct nand_chip *nand = NULL;
+ int i = 0, ChipID = 1;
+
+#ifdef CONFIG_MTD_NAND_ECC_JFFS2
+ oob_config.ecc_pos[0] = NAND_JFFS2_OOB_ECCPOS0;
+ oob_config.ecc_pos[1] = NAND_JFFS2_OOB_ECCPOS1;
+ oob_config.ecc_pos[2] = NAND_JFFS2_OOB_ECCPOS2;
+ oob_config.ecc_pos[3] = NAND_JFFS2_OOB_ECCPOS3;
+ oob_config.ecc_pos[4] = NAND_JFFS2_OOB_ECCPOS4;
+ oob_config.ecc_pos[5] = NAND_JFFS2_OOB_ECCPOS5;
+ oob_config.eccvalid_pos = 4;
+#else
+ oob_config.ecc_pos[0] = NAND_NOOB_ECCPOS0;
+ oob_config.ecc_pos[1] = NAND_NOOB_ECCPOS1;
+ oob_config.ecc_pos[2] = NAND_NOOB_ECCPOS2;
+ oob_config.ecc_pos[3] = NAND_NOOB_ECCPOS3;
+ oob_config.ecc_pos[4] = NAND_NOOB_ECCPOS4;
+ oob_config.ecc_pos[5] = NAND_NOOB_ECCPOS5;
+ oob_config.eccvalid_pos = NAND_NOOB_ECCVPOS;
+#endif
+ oob_config.badblock_pos = 5;
+
+ for (i=0; i<CFG_MAX_NAND_DEVICE; i++) {
+ if (nand_dev_desc[i].ChipID == NAND_ChipID_UNKNOWN) {
+ nand = &nand_dev_desc[i];
+ break;
+ }
+ }
+ if (!nand)
+ return (0);
+
+ memset((char *)nand, 0, sizeof(struct nand_chip));
+
+ nand->IO_ADDR = physadr;
+ nand->cache_page = -1; /* init the cache page */
+ NanD_ScanChips(nand);
+
+ if (nand->totlen == 0) {
+ /* no chips found, clean up and quit */
+ memset((char *)nand, 0, sizeof(struct nand_chip));
+ nand->ChipID = NAND_ChipID_UNKNOWN;
+ return (0);
+ }
+
+ nand->ChipID = ChipID;
+ if (curr_device == -1)
+ curr_device = i;
+
+ nand->data_buf = malloc (nand->oobblock + nand->oobsize);
+ if (!nand->data_buf) {
+ puts ("Cannot allocate memory for data structures.\n");
+ return (0);
+ }
+
+ return (nand->totlen);
+}
+
+#ifdef CONFIG_MTD_NAND_ECC
+/*
+ * Pre-calculated 256-way 1 byte column parity
+ */
+static const u_char nand_ecc_precalc_table[] = {
+ 0x00, 0x55, 0x56, 0x03, 0x59, 0x0c, 0x0f, 0x5a,
+ 0x5a, 0x0f, 0x0c, 0x59, 0x03, 0x56, 0x55, 0x00,
+ 0x65, 0x30, 0x33, 0x66, 0x3c, 0x69, 0x6a, 0x3f,
+ 0x3f, 0x6a, 0x69, 0x3c, 0x66, 0x33, 0x30, 0x65,
+ 0x66, 0x33, 0x30, 0x65, 0x3f, 0x6a, 0x69, 0x3c,
+ 0x3c, 0x69, 0x6a, 0x3f, 0x65, 0x30, 0x33, 0x66,
+ 0x03, 0x56, 0x55, 0x00, 0x5a, 0x0f, 0x0c, 0x59,
+ 0x59, 0x0c, 0x0f, 0x5a, 0x00, 0x55, 0x56, 0x03,
+ 0x69, 0x3c, 0x3f, 0x6a, 0x30, 0x65, 0x66, 0x33,
+ 0x33, 0x66, 0x65, 0x30, 0x6a, 0x3f, 0x3c, 0x69,
+ 0x0c, 0x59, 0x5a, 0x0f, 0x55, 0x00, 0x03, 0x56,
+ 0x56, 0x03, 0x00, 0x55, 0x0f, 0x5a, 0x59, 0x0c,
+ 0x0f, 0x5a, 0x59, 0x0c, 0x56, 0x03, 0x00, 0x55,
+ 0x55, 0x00, 0x03, 0x56, 0x0c, 0x59, 0x5a, 0x0f,
+ 0x6a, 0x3f, 0x3c, 0x69, 0x33, 0x66, 0x65, 0x30,
+ 0x30, 0x65, 0x66, 0x33, 0x69, 0x3c, 0x3f, 0x6a,
+ 0x6a, 0x3f, 0x3c, 0x69, 0x33, 0x66, 0x65, 0x30,
+ 0x30, 0x65, 0x66, 0x33, 0x69, 0x3c, 0x3f, 0x6a,
+ 0x0f, 0x5a, 0x59, 0x0c, 0x56, 0x03, 0x00, 0x55,
+ 0x55, 0x00, 0x03, 0x56, 0x0c, 0x59, 0x5a, 0x0f,
+ 0x0c, 0x59, 0x5a, 0x0f, 0x55, 0x00, 0x03, 0x56,
+ 0x56, 0x03, 0x00, 0x55, 0x0f, 0x5a, 0x59, 0x0c,
+ 0x69, 0x3c, 0x3f, 0x6a, 0x30, 0x65, 0x66, 0x33,
+ 0x33, 0x66, 0x65, 0x30, 0x6a, 0x3f, 0x3c, 0x69,
+ 0x03, 0x56, 0x55, 0x00, 0x5a, 0x0f, 0x0c, 0x59,
+ 0x59, 0x0c, 0x0f, 0x5a, 0x00, 0x55, 0x56, 0x03,
+ 0x66, 0x33, 0x30, 0x65, 0x3f, 0x6a, 0x69, 0x3c,
+ 0x3c, 0x69, 0x6a, 0x3f, 0x65, 0x30, 0x33, 0x66,
+ 0x65, 0x30, 0x33, 0x66, 0x3c, 0x69, 0x6a, 0x3f,
+ 0x3f, 0x6a, 0x69, 0x3c, 0x66, 0x33, 0x30, 0x65,
+ 0x00, 0x55, 0x56, 0x03, 0x59, 0x0c, 0x0f, 0x5a,
+ 0x5a, 0x0f, 0x0c, 0x59, 0x03, 0x56, 0x55, 0x00
+};
+
+
+/*
+ * Creates non-inverted ECC code from line parity
+ */
+static void nand_trans_result(u_char reg2, u_char reg3,
+ u_char *ecc_code)
+{
+ u_char a, b, i, tmp1, tmp2;
+
+ /* Initialize variables */
+ a = b = 0x80;
+ tmp1 = tmp2 = 0;
+
+ /* Calculate first ECC byte */
+ for (i = 0; i < 4; i++) {
+ if (reg3 & a) /* LP15,13,11,9 --> ecc_code[0] */
+ tmp1 |= b;
+ b >>= 1;
+ if (reg2 & a) /* LP14,12,10,8 --> ecc_code[0] */
+ tmp1 |= b;
+ b >>= 1;
+ a >>= 1;
+ }
+
+ /* Calculate second ECC byte */
+ b = 0x80;
+ for (i = 0; i < 4; i++) {
+ if (reg3 & a) /* LP7,5,3,1 --> ecc_code[1] */
+ tmp2 |= b;
+ b >>= 1;
+ if (reg2 & a) /* LP6,4,2,0 --> ecc_code[1] */
+ tmp2 |= b;
+ b >>= 1;
+ a >>= 1;
+ }
+
+ /* Store two of the ECC bytes */
+ ecc_code[0] = tmp1;
+ ecc_code[1] = tmp2;
+}
+
+/*
+ * Calculate 3 byte ECC code for 256 byte block
+ */
+static void nand_calculate_ecc (const u_char *dat, u_char *ecc_code)
+{
+ u_char idx, reg1, reg3;
+ int j;
+
+ /* Initialize variables */
+ reg1 = reg3 = 0;
+ ecc_code[0] = ecc_code[1] = ecc_code[2] = 0;
+
+ /* Build up column parity */
+ for(j = 0; j < 256; j++) {
+
+ /* Get CP0 - CP5 from table */
+ idx = nand_ecc_precalc_table[dat[j]];
+ reg1 ^= idx;
+
+ /* All bit XOR = 1 ? */
+ if (idx & 0x40) {
+ reg3 ^= (u_char) j;
+ }
+ }
+
+ /* Create non-inverted ECC code from line parity */
+ nand_trans_result((reg1 & 0x40) ? ~reg3 : reg3, reg3, ecc_code);
+
+ /* Calculate final ECC code */
+ ecc_code[0] = ~ecc_code[0];
+ ecc_code[1] = ~ecc_code[1];
+ ecc_code[2] = ((~reg1) << 2) | 0x03;
+}
+
+/*
+ * Detect and correct a 1 bit error for 256 byte block
+ */
+static int nand_correct_data (u_char *dat, u_char *read_ecc, u_char *calc_ecc)
+{
+ u_char a, b, c, d1, d2, d3, add, bit, i;
+
+ /* Do error detection */
+ d1 = calc_ecc[0] ^ read_ecc[0];
+ d2 = calc_ecc[1] ^ read_ecc[1];
+ d3 = calc_ecc[2] ^ read_ecc[2];
+
+ if ((d1 | d2 | d3) == 0) {
+ /* No errors */
+ return 0;
+ } else {
+ a = (d1 ^ (d1 >> 1)) & 0x55;
+ b = (d2 ^ (d2 >> 1)) & 0x55;
+ c = (d3 ^ (d3 >> 1)) & 0x54;
+
+ /* Found and will correct single bit error in the data */
+ if ((a == 0x55) && (b == 0x55) && (c == 0x54)) {
+ c = 0x80;
+ add = 0;
+ a = 0x80;
+ for (i=0; i<4; i++) {
+ if (d1 & c)
+ add |= a;
+ c >>= 2;
+ a >>= 1;
+ }
+ c = 0x80;
+ for (i=0; i<4; i++) {
+ if (d2 & c)
+ add |= a;
+ c >>= 2;
+ a >>= 1;
+ }
+ bit = 0;
+ b = 0x04;
+ c = 0x80;
+ for (i=0; i<3; i++) {
+ if (d3 & c)
+ bit |= b;
+ c >>= 2;
+ b >>= 1;
+ }
+ b = 0x01;
+ a = dat[add];
+ a ^= (b << bit);
+ dat[add] = a;
+ return 1;
+ }
+ else {
+ i = 0;
+ while (d1) {
+ if (d1 & 0x01)
+ ++i;
+ d1 >>= 1;
+ }
+ while (d2) {
+ if (d2 & 0x01)
+ ++i;
+ d2 >>= 1;
+ }
+ while (d3) {
+ if (d3 & 0x01)
+ ++i;
+ d3 >>= 1;
+ }
+ if (i == 1) {
+ /* ECC Code Error Correction */
+ read_ecc[0] = calc_ecc[0];
+ read_ecc[1] = calc_ecc[1];
+ read_ecc[2] = calc_ecc[2];
+ return 2;
+ }
+ else {
+ /* Uncorrectable Error */
+ return -1;
+ }
+ }
+ }
+
+ /* Should never happen */
+ return -1;
+}
+
+#endif
+
+#ifdef CONFIG_JFFS2_NAND
+
+int read_jffs2_nand(size_t start, size_t len,
+ size_t * retlen, u_char * buf, int nanddev)
+{
+ return nand_rw(nand_dev_desc + nanddev, NANDRW_READ | NANDRW_JFFS2,
+ start, len, retlen, buf);
+}
+#endif /* CONFIG_JFFS2_NAND */
-#endif /* (CONFIG_COMMANDS & CFG_CMD_NAND) */
+#endif /* (CONFIG_COMMANDS & CFG_CMD_NAND) */
--- /dev/null
+#include <common.h>
+
+#if (CONFIG_COMMANDS & CFG_CMD_NAND) && defined CONFIG_NEW_NAND_CODE
+
+#include <command.h>
+#include <watchdog.h>
+#include <malloc.h>
+#include <asm/byteorder.h>
+
+#ifdef CONFIG_SHOW_BOOT_PROGRESS
+# include <status_led.h>
+# define SHOW_BOOT_PROGRESS(arg) show_boot_progress(arg)
+#else
+# define SHOW_BOOT_PROGRESS(arg)
+#endif
+
+#include <jffs2/jffs2.h>
+#include <nand.h>
+
+extern nand_info_t nand_info[]; /* info for NAND chips */
+
+static int nand_dump_oob(nand_info_t *nand, ulong off)
+{
+ return 0;
+}
+
+static int nand_dump(nand_info_t *nand, ulong off)
+{
+ int i;
+ u_char *buf, *p;
+
+ buf = malloc(nand->oobblock + nand->oobsize);
+ if (!buf) {
+ puts("No memory for page buffer\n");
+ return 1;
+ }
+ off &= ~(nand->oobblock - 1);
+ i = nand_read_raw(nand, buf, off, nand->oobblock, nand->oobsize);
+ if (i < 0) {
+ printf("Error (%d) reading page %08x\n", i, off);
+ free(buf);
+ return 1;
+ }
+ printf("Page %08x dump:\n", off);
+ i = nand->oobblock >> 4; p = buf;
+ while (i--) {
+ printf( "\t%02x %02x %02x %02x %02x %02x %02x %02x"
+ " %02x %02x %02x %02x %02x %02x %02x %02x\n",
+ p[0], p[1], p[2], p[3], p[4], p[5], p[6], p[7],
+ p[8], p[9], p[10], p[11], p[12], p[13], p[14], p[15]);
+ p += 16;
+ }
+ puts("OOB:\n");
+ i = nand->oobsize >> 3;
+ while (i--) {
+ printf( "\t%02x %02x %02x %02x %02x %02x %02x %02x\n",
+ p[0], p[1], p[2], p[3], p[4], p[5], p[6], p[7]);
+ p += 8;
+ }
+ free(buf);
+
+ return 0;
+}
+
+/* ------------------------------------------------------------------------- */
+
+static void
+arg_off_size(int argc, char *argv[], ulong *off, ulong *size, ulong totsize)
+{
+ *off = 0;
+ *size = 0;
+
+#if defined(CONFIG_JFFS2_NAND) && defined(CFG_JFFS_CUSTOM_PART)
+ if (argc >= 1 && strcmp(argv[0], "partition") == 0) {
+ int part_num;
+ struct part_info *part;
+ const char *partstr;
+
+ if (argc >= 2)
+ partstr = argv[1];
+ else
+ partstr = getenv("partition");
+
+ if (partstr)
+ part_num = (int)simple_strtoul(partstr, NULL, 10);
+ else
+ part_num = 0;
+
+ part = jffs2_part_info(part_num);
+ if (part == NULL) {
+ printf("\nInvalid partition %d\n", part_num);
+ return;
+ }
+ *size = part->size;
+ *off = (ulong)part->offset;
+ } else
+#endif
+ {
+ if (argc >= 1)
+ *off = (ulong)simple_strtoul(argv[0], NULL, 16);
+ else
+ *off = 0;
+
+ if (argc >= 2)
+ *size = (ulong)simple_strtoul(argv[1], NULL, 16);
+ else
+ *size = totsize - *off;
+
+ }
+
+}
+
+int do_nand(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
+{
+ int i, dev, ret;
+ ulong addr, off, size;
+ char *cmd, *s;
+ nand_info_t *nand;
+
+ /* at least two arguments please */
+ if (argc < 2)
+ goto usage;
+
+ cmd = argv[1];
+
+ if (strcmp(cmd, "info") == 0) {
+
+ putc('\n');
+ for (i = 0; i < CFG_MAX_NAND_DEVICE; i++) {
+ if (nand_info[i].name)
+ printf("Device %d: %s\n", i, nand_info[i].name);
+ }
+ return 0;
+ }
+
+ if (strcmp(cmd, "device") == 0) {
+
+ if (argc < 3) {
+ if ((nand_curr_device < 0) ||
+ (nand_curr_device >= CFG_MAX_NAND_DEVICE))
+ puts("\nno devices available\n");
+ else
+ printf("\nDevice %d: %s\n", nand_curr_device,
+ nand_info[nand_curr_device].name);
+ return 0;
+ }
+ dev = (int)simple_strtoul(argv[2], NULL, 10);
+ if (dev < 0 || dev >= CFG_MAX_NAND_DEVICE || !nand_info[dev].name) {
+ puts("No such device\n");
+ return 1;
+ }
+ printf("Device %d: %s", dev, nand_info[dev].name);
+ puts("... is now current device\n");
+ nand_curr_device = dev;
+ return 0;
+ }
+
+ if (strcmp(cmd, "bad") != 0 && strcmp(cmd, "erase") != 0 &&
+ strncmp(cmd, "dump", 4) != 0 &&
+ strncmp(cmd, "read", 4) != 0 && strncmp(cmd, "write", 5) != 0)
+ goto usage;
+
+ /* the following commands operate on the current device */
+ if (nand_curr_device < 0 || nand_curr_device >= CFG_MAX_NAND_DEVICE ||
+ !nand_info[nand_curr_device].name) {
+ puts("\nno devices available\n");
+ return 1;
+ }
+ nand = &nand_info[nand_curr_device];
+
+ if (strcmp(cmd, "bad") == 0) {
+ printf("\nDevice %d bad blocks:\n", nand_curr_device);
+ for (off = 0; off < nand->size; off += nand->erasesize)
+ if (nand_block_isbad(nand, off))
+ printf(" %08x\n", off);
+ return 0;
+ }
+
+ if (strcmp(cmd, "erase") == 0) {
+ arg_off_size(argc - 2, argv + 2, &off, &size, nand->size);
+ if (off == 0 && size == 0)
+ return 1;
+
+ printf("\nNAND erase: device %d offset 0x%x, size 0x%x ",
+ nand_curr_device, off, size);
+ ret = nand_erase(nand, off, size);
+ printf("%s\n", ret ? "ERROR" : "OK");
+
+ return ret == 0 ? 0 : 1;
+ }
+
+ if (strncmp(cmd, "dump", 4) == 0) {
+ if (argc < 3)
+ goto usage;
+
+ s = strchr(cmd, '.');
+ off = (int)simple_strtoul(argv[2], NULL, 16);
+
+ if (s != NULL && strcmp(s, ".oob") == 0)
+ ret = nand_dump_oob(nand, off);
+ else
+ ret = nand_dump(nand, off);
+
+ return ret == 0 ? 1 : 0;
+
+ }
+
+ /* read write */
+ if (strncmp(cmd, "read", 4) == 0 || strncmp(cmd, "write", 5) == 0) {
+ if (argc < 4)
+ goto usage;
+/*
+ s = strchr(cmd, '.');
+ clean = CLEAN_NONE;
+ if (s != NULL) {
+ if (strcmp(s, ".jffs2") == 0 || strcmp(s, ".e") == 0
+ || strcmp(s, ".i"))
+ clean = CLEAN_JFFS2;
+ }
+*/
+ addr = (ulong)simple_strtoul(argv[2], NULL, 16);
+
+ arg_off_size(argc - 3, argv + 3, &off, &size, nand->size);
+ if (off == 0 && size == 0)
+ return 1;
+
+ i = strncmp(cmd, "read", 4) == 0; /* 1 = read, 0 = write */
+ printf("\nNAND %s: device %d offset %u, size %u ... ",
+ i ? "read" : "write", nand_curr_device, off, size);
+
+ if (i)
+ ret = nand_read(nand, off, &size, (u_char *)addr);
+ else
+ ret = nand_write(nand, off, &size, (u_char *)addr);
+
+ printf(" %d bytes %s: %s\n", size,
+ i ? "read" : "written", ret ? "ERROR" : "OK");
+
+ return ret == 0 ? 0 : 1;
+ }
+usage:
+ printf("Usage:\n%s\n", cmdtp->usage);
+ return 1;
+}
+
+U_BOOT_CMD(nand, 5, 1, do_nand,
+ "nand - NAND sub-system\n",
+ "info - show available NAND devices\n"
+ "nand device [dev] - show or set current device\n"
+ "nand read[.jffs2] - addr off size\n"
+ "nand write[.jffs2] - addr off size - read/write `size' bytes starting\n"
+ " at offset `off' to/from memory address `addr'\n"
+ "nand erase [clean] [off size] - erase `size' bytes from\n"
+ " offset `off' (entire device if not specified)\n"
+ "nand bad - show bad blocks\n"
+ "nand dump[.oob] off - dump page\n"
+ "nand scrub - really clean NAND erasing bad blocks (UNSAFE)\n"
+ "nand markbad off - mark bad block at offset (UNSAFE)\n"
+ "nand biterr off - make a bit error at offset (UNSAFE)\n");
+
+int do_nandboot(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
+{
+ char *boot_device = NULL;
+ char *ep;
+ int dev;
+ int r;
+ ulong addr, cnt, offset = 0;
+ image_header_t *hdr;
+ nand_info_t *nand;
+
+ switch (argc) {
+ case 1:
+ addr = CFG_LOAD_ADDR;
+ boot_device = getenv("bootdevice");
+ break;
+ case 2:
+ addr = simple_strtoul(argv[1], NULL, 16);
+ boot_device = getenv("bootdevice");
+ break;
+ case 3:
+ addr = simple_strtoul(argv[1], NULL, 16);
+ boot_device = argv[2];
+ break;
+ case 4:
+ addr = simple_strtoul(argv[1], NULL, 16);
+ boot_device = argv[2];
+ offset = simple_strtoul(argv[3], NULL, 16);
+ break;
+ default:
+ printf("Usage:\n%s\n", cmdtp->usage);
+ SHOW_BOOT_PROGRESS(-1);
+ return 1;
+ }
+
+ if (!boot_device) {
+ puts("\n** No boot device **\n");
+ SHOW_BOOT_PROGRESS(-1);
+ return 1;
+ }
+
+ dev = simple_strtoul(boot_device, &ep, 16);
+
+ if (dev < 0 || dev >= CFG_MAX_NAND_DEVICE || !nand_info[dev].name) {
+ printf("\n** Device %d not available\n", dev);
+ SHOW_BOOT_PROGRESS(-1);
+ return 1;
+ }
+
+ nand = &nand_info[dev];
+ printf("\nLoading from device %d: %s (offset 0x%lx)\n",
+ dev, nand->name, offset);
+
+ cnt = nand->oobblock;
+ r = nand_read(nand, offset, &cnt, (u_char *) addr);
+ if (r) {
+ printf("** Read error on %d\n", dev);
+ SHOW_BOOT_PROGRESS(-1);
+ return 1;
+ }
+
+ hdr = (image_header_t *) addr;
+
+ if (ntohl(hdr->ih_magic) != IH_MAGIC) {
+ printf("\n** Bad Magic Number 0x%x **\n", hdr->ih_magic);
+ SHOW_BOOT_PROGRESS(-1);
+ return 1;
+ }
+
+ print_image_hdr(hdr);
+
+ cnt = (ntohl(hdr->ih_size) + sizeof (image_header_t));
+
+ r = nand_read(nand, offset, &cnt, (u_char *) addr);
+ if (r) {
+ printf("** Read error on %d\n", dev);
+ SHOW_BOOT_PROGRESS(-1);
+ return 1;
+ }
+
+ /* Loading ok, update default load address */
+
+ load_addr = addr;
+
+ /* Check if we should attempt an auto-start */
+ if (((ep = getenv("autostart")) != NULL) && (strcmp(ep, "yes") == 0)) {
+ char *local_args[2];
+ extern int do_bootm(cmd_tbl_t *, int, int, char *[]);
+
+ local_args[0] = argv[0];
+ local_args[1] = NULL;
+
+ printf("Automatic boot of image at addr 0x%08lx ...\n", addr);
+
+ do_bootm(cmdtp, 0, 1, local_args);
+ return 1;
+ }
+ return 0;
+}
+
+U_BOOT_CMD(nboot, 4, 1, do_nandboot,
+ "nboot - boot from NAND device\n", "loadAddr dev\n");
+
+
+#endif /* (CONFIG_COMMANDS & CFG_CMD_NAND) */
#
PLATFORM_RELFLAGS += -fno-strict-aliasing -fno-common -ffixed-r8 \
- -mshort-load-bytes -msoft-float
+ -msoft-float
PLATFORM_CPPFLAGS += -mapcs-32 -march=armv4
$(CC) -M $(CFLAGS) $(OBJS:.o=.c) > $@
sinclude .depend
-
-/*
+/*
* drivers/mtd/nand/diskonchip.c
*
* (C) 2003 Red Hat, Inc.
* Author: David Woodhouse <dwmw2@infradead.org>
* Additional Diskonchip 2000 and Millennium support by Dan Brown <dan_brown@ieee.org>
* Diskonchip Millennium Plus support by Kalev Lember <kalev@smartlink.ee>
- *
+ *
* Error correction code lifted from the old docecc code
- * Author: Fabrice Bellard (fabrice.bellard@netgem.com)
+ * Author: Fabrice Bellard (fabrice.bellard@netgem.com)
* Copyright (C) 2000 Netgem S.A.
* converted to the generic Reed-Solomon library by Thomas Gleixner <tglx@linutronix.de>
- *
+ *
* Interface to generic NAND code for M-Systems DiskOnChip devices
*
* $Id: diskonchip.c,v 1.45 2005/01/05 18:05:14 dwmw2 Exp $
static unsigned long __initdata doc_locations[] = {
#if defined (__alpha__) || defined(__i386__) || defined(__x86_64__)
#ifdef CONFIG_MTD_DISKONCHIP_PROBE_HIGH
- 0xfffc8000, 0xfffca000, 0xfffcc000, 0xfffce000,
+ 0xfffc8000, 0xfffca000, 0xfffcc000, 0xfffce000,
0xfffd0000, 0xfffd2000, 0xfffd4000, 0xfffd6000,
- 0xfffd8000, 0xfffda000, 0xfffdc000, 0xfffde000,
- 0xfffe0000, 0xfffe2000, 0xfffe4000, 0xfffe6000,
+ 0xfffd8000, 0xfffda000, 0xfffdc000, 0xfffde000,
+ 0xfffe0000, 0xfffe2000, 0xfffe4000, 0xfffe6000,
0xfffe8000, 0xfffea000, 0xfffec000, 0xfffee000,
#else /* CONFIG_MTD_DOCPROBE_HIGH */
- 0xc8000, 0xca000, 0xcc000, 0xce000,
+ 0xc8000, 0xca000, 0xcc000, 0xce000,
0xd0000, 0xd2000, 0xd4000, 0xd6000,
- 0xd8000, 0xda000, 0xdc000, 0xde000,
- 0xe0000, 0xe2000, 0xe4000, 0xe6000,
+ 0xd8000, 0xda000, 0xdc000, 0xde000,
+ 0xe0000, 0xe2000, 0xe4000, 0xe6000,
0xe8000, 0xea000, 0xec000, 0xee000,
#endif /* CONFIG_MTD_DOCPROBE_HIGH */
#elif defined(__PPC__)
0xe4000000,
#elif defined(CONFIG_MOMENCO_OCELOT)
0x2f000000,
- 0xff000000,
+ 0xff000000,
#elif defined(CONFIG_MOMENCO_OCELOT_G) || defined (CONFIG_MOMENCO_OCELOT_C)
- 0xff000000,
+ 0xff000000,
##else
#warning Unknown architecture for DiskOnChip. No default probe locations defined
#endif
/* the Reed Solomon control structure */
static struct rs_control *rs_decoder;
-/*
+/*
* The HW decoder in the DoC ASIC's provides us a error syndrome,
* which we must convert to a standard syndrom usable by the generic
* Reed-Solomon library code.
/* Initialize the syndrom buffer */
for (i = 0; i < NROOTS; i++)
s[i] = ds[0];
- /*
- * Evaluate
+ /*
+ * Evaluate
* s[i] = ds[3]x^3 + ds[2]x^2 + ds[1]x^1 + ds[0]
* where x = alpha^(FCR + i)
*/
if (nerr < 0)
return nerr;
- /*
+ /*
* Correct the errors. The bitpositions are a bit of magic,
* but they are given by the design of the de/encoder circuit
* in the DoC ASIC's.
can be modified since pos is even */
index = (pos >> 3) ^ 1;
bitpos = pos & 7;
- if ((index >= 0 && index < SECTOR_SIZE) ||
+ if ((index >= 0 && index < SECTOR_SIZE) ||
index == (SECTOR_SIZE + 1)) {
val = (uint8_t) (errval[i] >> (2 + bitpos));
parity ^= val;
bitpos = (bitpos + 10) & 7;
if (bitpos == 0)
bitpos = 8;
- if ((index >= 0 && index < SECTOR_SIZE) ||
+ if ((index >= 0 && index < SECTOR_SIZE) ||
index == (SECTOR_SIZE + 1)) {
val = (uint8_t)(errval[i] << (8 - bitpos));
parity ^= val;
{
volatile char dummy;
int i;
-
+
for (i = 0; i < cycles; i++) {
if (DoC_is_Millennium(doc))
dummy = ReadDOC(doc->virtadr, NOP);
else
dummy = ReadDOC(doc->virtadr, DOCStatus);
}
-
+
}
#define CDSN_CTRL_FR_B_MASK (CDSN_CTRL_FR_B0 | CDSN_CTRL_FR_B1)
/* DOC_WaitReady: Wait for RDY line to be asserted by the flash chip */
static int _DoC_WaitReady(struct doc_priv *doc)
{
- void __iomem *docptr = doc->virtadr;
+ void __iomem *docptr = doc->virtadr;
unsigned long timeo = jiffies + (HZ * 10);
if(debug) printk("_DoC_WaitReady...\n");
static inline int DoC_WaitReady(struct doc_priv *doc)
{
- void __iomem *docptr = doc->virtadr;
+ void __iomem *docptr = doc->virtadr;
int ret = 0;
if (DoC_is_MillenniumPlus(doc)) {
{
struct nand_chip *this = mtd->priv;
struct doc_priv *doc = this->priv;
- void __iomem *docptr = doc->virtadr;
+ void __iomem *docptr = doc->virtadr;
if(debug)printk("write_byte %02x\n", datum);
WriteDOC(datum, docptr, CDSNSlowIO);
{
struct nand_chip *this = mtd->priv;
struct doc_priv *doc = this->priv;
- void __iomem *docptr = doc->virtadr;
+ void __iomem *docptr = doc->virtadr;
u_char ret;
ReadDOC(docptr, CDSNSlowIO);
return ret;
}
-static void doc2000_writebuf(struct mtd_info *mtd,
+static void doc2000_writebuf(struct mtd_info *mtd,
const u_char *buf, int len)
{
struct nand_chip *this = mtd->priv;
struct doc_priv *doc = this->priv;
- void __iomem *docptr = doc->virtadr;
+ void __iomem *docptr = doc->virtadr;
int i;
if (debug)printk("writebuf of %d bytes: ", len);
for (i=0; i < len; i++) {
if (debug) printk("\n");
}
-static void doc2000_readbuf(struct mtd_info *mtd,
+static void doc2000_readbuf(struct mtd_info *mtd,
u_char *buf, int len)
{
struct nand_chip *this = mtd->priv;
struct doc_priv *doc = this->priv;
- void __iomem *docptr = doc->virtadr;
+ void __iomem *docptr = doc->virtadr;
int i;
if (debug)printk("readbuf of %d bytes: ", len);
}
}
-static void doc2000_readbuf_dword(struct mtd_info *mtd,
+static void doc2000_readbuf_dword(struct mtd_info *mtd,
u_char *buf, int len)
{
struct nand_chip *this = mtd->priv;
struct doc_priv *doc = this->priv;
- void __iomem *docptr = doc->virtadr;
+ void __iomem *docptr = doc->virtadr;
int i;
if (debug) printk("readbuf_dword of %d bytes: ", len);
}
}
-static int doc2000_verifybuf(struct mtd_info *mtd,
+static int doc2000_verifybuf(struct mtd_info *mtd,
const u_char *buf, int len)
{
struct nand_chip *this = mtd->priv;
struct doc_priv *doc = this->priv;
- void __iomem *docptr = doc->virtadr;
+ void __iomem *docptr = doc->virtadr;
int i;
for (i=0; i < len; i++)
this->read_buf = &doc2000_readbuf_dword;
}
}
-
+
return ret;
}
struct doc_priv *doc = this->priv;
int status;
-
+
DoC_WaitReady(doc);
this->cmdfunc(mtd, NAND_CMD_STATUS, -1, -1);
DoC_WaitReady(doc);
{
struct nand_chip *this = mtd->priv;
struct doc_priv *doc = this->priv;
- void __iomem *docptr = doc->virtadr;
+ void __iomem *docptr = doc->virtadr;
WriteDOC(datum, docptr, CDSNSlowIO);
WriteDOC(datum, docptr, Mil_CDSN_IO);
{
struct nand_chip *this = mtd->priv;
struct doc_priv *doc = this->priv;
- void __iomem *docptr = doc->virtadr;
+ void __iomem *docptr = doc->virtadr;
- //ReadDOC(docptr, CDSNSlowIO);
+ /*ReadDOC(docptr, CDSNSlowIO); */
/* 11.4.5 -- delay twice to allow extended length cycle */
DoC_Delay(doc, 2);
ReadDOC(docptr, ReadPipeInit);
- //return ReadDOC(docptr, Mil_CDSN_IO);
+ /*return ReadDOC(docptr, Mil_CDSN_IO); */
return ReadDOC(docptr, LastDataRead);
}
-static void doc2001_writebuf(struct mtd_info *mtd,
+static void doc2001_writebuf(struct mtd_info *mtd,
const u_char *buf, int len)
{
struct nand_chip *this = mtd->priv;
struct doc_priv *doc = this->priv;
- void __iomem *docptr = doc->virtadr;
+ void __iomem *docptr = doc->virtadr;
int i;
for (i=0; i < len; i++)
WriteDOC(0x00, docptr, WritePipeTerm);
}
-static void doc2001_readbuf(struct mtd_info *mtd,
+static void doc2001_readbuf(struct mtd_info *mtd,
u_char *buf, int len)
{
struct nand_chip *this = mtd->priv;
struct doc_priv *doc = this->priv;
- void __iomem *docptr = doc->virtadr;
+ void __iomem *docptr = doc->virtadr;
int i;
/* Start read pipeline */
buf[i] = ReadDOC(docptr, LastDataRead);
}
-static int doc2001_verifybuf(struct mtd_info *mtd,
+static int doc2001_verifybuf(struct mtd_info *mtd,
const u_char *buf, int len)
{
struct nand_chip *this = mtd->priv;
struct doc_priv *doc = this->priv;
- void __iomem *docptr = doc->virtadr;
+ void __iomem *docptr = doc->virtadr;
int i;
/* Start read pipeline */
{
struct nand_chip *this = mtd->priv;
struct doc_priv *doc = this->priv;
- void __iomem *docptr = doc->virtadr;
+ void __iomem *docptr = doc->virtadr;
u_char ret;
- ReadDOC(docptr, Mplus_ReadPipeInit);
- ReadDOC(docptr, Mplus_ReadPipeInit);
- ret = ReadDOC(docptr, Mplus_LastDataRead);
+ ReadDOC(docptr, Mplus_ReadPipeInit);
+ ReadDOC(docptr, Mplus_ReadPipeInit);
+ ret = ReadDOC(docptr, Mplus_LastDataRead);
if (debug) printk("read_byte returns %02x\n", ret);
return ret;
}
-static void doc2001plus_writebuf(struct mtd_info *mtd,
+static void doc2001plus_writebuf(struct mtd_info *mtd,
const u_char *buf, int len)
{
struct nand_chip *this = mtd->priv;
struct doc_priv *doc = this->priv;
- void __iomem *docptr = doc->virtadr;
+ void __iomem *docptr = doc->virtadr;
int i;
if (debug)printk("writebuf of %d bytes: ", len);
if (debug) printk("\n");
}
-static void doc2001plus_readbuf(struct mtd_info *mtd,
+static void doc2001plus_readbuf(struct mtd_info *mtd,
u_char *buf, int len)
{
struct nand_chip *this = mtd->priv;
struct doc_priv *doc = this->priv;
- void __iomem *docptr = doc->virtadr;
+ void __iomem *docptr = doc->virtadr;
int i;
if (debug)printk("readbuf of %d bytes: ", len);
if (debug) printk("\n");
}
-static int doc2001plus_verifybuf(struct mtd_info *mtd,
+static int doc2001plus_verifybuf(struct mtd_info *mtd,
const u_char *buf, int len)
{
struct nand_chip *this = mtd->priv;
struct doc_priv *doc = this->priv;
- void __iomem *docptr = doc->virtadr;
+ void __iomem *docptr = doc->virtadr;
int i;
if (debug)printk("verifybuf of %d bytes: ", len);
{
struct nand_chip *this = mtd->priv;
struct doc_priv *doc = this->priv;
- void __iomem *docptr = doc->virtadr;
+ void __iomem *docptr = doc->virtadr;
int floor = 0;
if(debug)printk("select chip (%d)\n", chip);
{
struct nand_chip *this = mtd->priv;
struct doc_priv *doc = this->priv;
- void __iomem *docptr = doc->virtadr;
+ void __iomem *docptr = doc->virtadr;
int floor = 0;
if(debug)printk("select chip (%d)\n", chip);
{
struct nand_chip *this = mtd->priv;
struct doc_priv *doc = this->priv;
- void __iomem *docptr = doc->virtadr;
+ void __iomem *docptr = doc->virtadr;
switch(cmd) {
case NAND_CTL_SETNCE:
{
struct nand_chip *this = mtd->priv;
struct doc_priv *doc = this->priv;
- void __iomem *docptr = doc->virtadr;
+ void __iomem *docptr = doc->virtadr;
/*
* Must terminate write pipeline before sending any commands
WriteDOC(0, docptr, Mplus_FlashControl);
}
- /*
+ /*
* program and erase have their own busy handlers
* status and sequential in needs no delay
*/
/* This applies to read commands */
default:
- /*
+ /*
* If we don't have access to the busy pin, we apply the given
* command delay
*/
{
struct nand_chip *this = mtd->priv;
struct doc_priv *doc = this->priv;
- void __iomem *docptr = doc->virtadr;
+ void __iomem *docptr = doc->virtadr;
if (DoC_is_MillenniumPlus(doc)) {
/* 11.4.2 -- must NOP four times before checking FR/B# */
{
struct nand_chip *this = mtd->priv;
struct doc_priv *doc = this->priv;
- void __iomem *docptr = doc->virtadr;
+ void __iomem *docptr = doc->virtadr;
/* Prime the ECC engine */
switch(mode) {
{
struct nand_chip *this = mtd->priv;
struct doc_priv *doc = this->priv;
- void __iomem *docptr = doc->virtadr;
+ void __iomem *docptr = doc->virtadr;
/* Prime the ECC engine */
switch(mode) {
{
struct nand_chip *this = mtd->priv;
struct doc_priv *doc = this->priv;
- void __iomem *docptr = doc->virtadr;
+ void __iomem *docptr = doc->virtadr;
int i;
int emptymatch = 1;
for (i = 0; i < 6; i++) {
if (DoC_is_MillenniumPlus(doc))
ecc_code[i] = ReadDOC_(docptr, DoC_Mplus_ECCSyndrome0 + i);
- else
+ else
ecc_code[i] = ReadDOC_(docptr, DoC_ECCSyndrome0 + i);
if (ecc_code[i] != empty_write_ecc[i])
emptymatch = 0;
int i, ret = 0;
struct nand_chip *this = mtd->priv;
struct doc_priv *doc = this->priv;
- void __iomem *docptr = doc->virtadr;
+ void __iomem *docptr = doc->virtadr;
volatile u_char dummy;
int emptymatch = 1;
-
+
/* flush the pipeline */
if (DoC_is_2000(doc)) {
dummy = ReadDOC(docptr, 2k_ECCStatus);
dummy = ReadDOC(docptr, ECCConf);
dummy = ReadDOC(docptr, ECCConf);
}
-
+
/* Error occured ? */
if (dummy & 0x80) {
for (i = 0; i < 6; i++) {
if (!emptymatch) ret = doc_ecc_decode (rs_decoder, dat, calc_ecc);
if (ret > 0)
printk(KERN_ERR "doc200x_correct_data corrected %d errors\n", ret);
- }
+ }
if (DoC_is_MillenniumPlus(doc))
WriteDOC(DOC_ECC_DIS, docptr, Mplus_ECCConf);
else
}
return ret;
}
-
-//u_char mydatabuf[528];
+
+/*u_char mydatabuf[528]; */
static struct nand_oobinfo doc200x_oobinfo = {
- .useecc = MTD_NANDECC_AUTOPLACE,
- .eccbytes = 6,
- .eccpos = {0, 1, 2, 3, 4, 5},
- .oobfree = { {8, 8} }
+ .useecc = MTD_NANDECC_AUTOPLACE,
+ .eccbytes = 6,
+ .eccpos = {0, 1, 2, 3, 4, 5},
+ .oobfree = { {8, 8} }
};
-
+
/* Find the (I)NFTL Media Header, and optionally also the mirror media header.
On sucessful return, buf will contain a copy of the media header for
further processing. id is the string to scan for, and will presumably be
int ret;
size_t retlen;
- end = min(end, mtd->size); // paranoia
+ end = min(end, mtd->size); /* paranoia */
for (offs = 0; offs < end; offs += mtd->erasesize) {
ret = mtd->read(mtd, offs, mtd->oobblock, &retlen, buf);
if (retlen != mtd->oobblock) continue;
if (!(numheaders=find_media_headers(mtd, buf, "ANAND", 1))) goto out;
mh = (struct NFTLMediaHeader *) buf;
-//#ifdef CONFIG_MTD_DEBUG_VERBOSE
-// if (CONFIG_MTD_DEBUG_VERBOSE >= 2)
+/*#ifdef CONFIG_MTD_DEBUG_VERBOSE */
+/* if (CONFIG_MTD_DEBUG_VERBOSE >= 2) */
printk(KERN_INFO " DataOrgID = %s\n"
" NumEraseUnits = %d\n"
" FirstPhysicalEUN = %d\n"
mh->DataOrgID, mh->NumEraseUnits,
mh->FirstPhysicalEUN, mh->FormattedSize,
mh->UnitSizeFactor);
-//#endif
+/*#endif */
blocks = mtd->size >> this->phys_erase_shift;
maxblocks = min(32768U, mtd->erasesize - psize);
offs <<= this->page_shift;
offs += mtd->erasesize;
- //parts[0].name = " DiskOnChip Boot / Media Header partition";
- //parts[0].offset = 0;
- //parts[0].size = offs;
+ /*parts[0].name = " DiskOnChip Boot / Media Header partition"; */
+ /*parts[0].offset = 0; */
+ /*parts[0].size = offs; */
parts[0].name = " DiskOnChip BDTL partition";
parts[0].offset = offs;
mh->BlockMultiplierBits = le32_to_cpu(mh->BlockMultiplierBits);
mh->FormatFlags = le32_to_cpu(mh->FormatFlags);
mh->PercentUsed = le32_to_cpu(mh->PercentUsed);
-
-//#ifdef CONFIG_MTD_DEBUG_VERBOSE
-// if (CONFIG_MTD_DEBUG_VERBOSE >= 2)
+
+/*#ifdef CONFIG_MTD_DEBUG_VERBOSE */
+/* if (CONFIG_MTD_DEBUG_VERBOSE >= 2) */
printk(KERN_INFO " bootRecordID = %s\n"
" NoOfBootImageBlocks = %d\n"
" NoOfBinaryPartitions = %d\n"
((unsigned char *) &mh->OsakVersion)[2] & 0xf,
((unsigned char *) &mh->OsakVersion)[3] & 0xf,
mh->PercentUsed);
-//#endif
+/*#endif */
vshift = this->phys_erase_shift + mh->BlockMultiplierBits;
ip->spareUnits = le32_to_cpu(ip->spareUnits);
ip->Reserved0 = le32_to_cpu(ip->Reserved0);
-//#ifdef CONFIG_MTD_DEBUG_VERBOSE
-// if (CONFIG_MTD_DEBUG_VERBOSE >= 2)
+/*#ifdef CONFIG_MTD_DEBUG_VERBOSE */
+/* if (CONFIG_MTD_DEBUG_VERBOSE >= 2) */
printk(KERN_INFO " PARTITION[%d] ->\n"
" virtualUnits = %d\n"
" firstUnit = %d\n"
i, ip->virtualUnits, ip->firstUnit,
ip->lastUnit, ip->flags,
ip->spareUnits);
-//#endif
+/*#endif */
/*
if ((i == 0) && (ip->firstUnit > 0)) {
ReadDOC(doc->virtadr, ChipID);
if (ReadDOC(doc->virtadr, ChipID) != DOC_ChipID_DocMil) {
/* It's not a Millennium; it's one of the newer
- DiskOnChip 2000 units with a similar ASIC.
+ DiskOnChip 2000 units with a similar ASIC.
Treat it like a Millennium, except that it
can have multiple chips. */
doc2000_count_chips(mtd);
* to the DOCControl register. So we store the current contents
* of the DOCControl register's location, in case we later decide
* that it's not a DiskOnChip, and want to put it back how we
- * found it.
+ * found it.
*/
save_control = ReadDOC(virtadr, DOCControl);
/* Reset the DiskOnChip ASIC */
- WriteDOC(DOC_MODE_CLR_ERR | DOC_MODE_MDWREN | DOC_MODE_RESET,
+ WriteDOC(DOC_MODE_CLR_ERR | DOC_MODE_MDWREN | DOC_MODE_RESET,
virtadr, DOCControl);
- WriteDOC(DOC_MODE_CLR_ERR | DOC_MODE_MDWREN | DOC_MODE_RESET,
+ WriteDOC(DOC_MODE_CLR_ERR | DOC_MODE_MDWREN | DOC_MODE_RESET,
virtadr, DOCControl);
/* Enable the DiskOnChip ASIC */
- WriteDOC(DOC_MODE_CLR_ERR | DOC_MODE_MDWREN | DOC_MODE_NORMAL,
+ WriteDOC(DOC_MODE_CLR_ERR | DOC_MODE_MDWREN | DOC_MODE_NORMAL,
virtadr, DOCControl);
- WriteDOC(DOC_MODE_CLR_ERR | DOC_MODE_MDWREN | DOC_MODE_NORMAL,
+ WriteDOC(DOC_MODE_CLR_ERR | DOC_MODE_MDWREN | DOC_MODE_NORMAL,
virtadr, DOCControl);
ChipID = ReadDOC(virtadr, ChipID);
if (ChipID == DOC_ChipID_DocMilPlus16) {
WriteDOC(~newval, virtadr, Mplus_AliasResolution);
oldval = ReadDOC(doc->virtadr, Mplus_AliasResolution);
- WriteDOC(newval, virtadr, Mplus_AliasResolution); // restore it
+ WriteDOC(newval, virtadr, Mplus_AliasResolution); /* restore it */
} else {
WriteDOC(~newval, virtadr, AliasResolution);
oldval = ReadDOC(doc->virtadr, AliasResolution);
- WriteDOC(newval, virtadr, AliasResolution); // restore it
+ WriteDOC(newval, virtadr, AliasResolution); /* restore it */
}
newval = ~newval;
if (oldval == newval) {
int i, ret = 0;
/* We could create the decoder on demand, if memory is a concern.
- * This way we have it handy, if an error happens
+ * This way we have it handy, if an error happens
*
* Symbolsize is 10 (bits)
* Primitve polynomial is x^10+x^3+1
* This is the generic MTD driver for NAND flash devices. It should be
* capable of working with almost all NAND chips currently available.
* Basic support for AG-AND chips is provided.
- *
+ *
* Additional technical information is available on
* http://www.linux-mtd.infradead.org/tech/nand.html
- *
+ *
* Copyright (C) 2000 Steven J. Hill (sjhill@realitydiluted.com)
* 2002 Thomas Gleixner (tglx@linutronix.de)
*
- * 02-08-2004 tglx: support for strange chips, which cannot auto increment
+ * 02-08-2004 tglx: support for strange chips, which cannot auto increment
* pages on read / read_oob
*
* 03-17-2004 tglx: Check ready before auto increment check. Simon Bayes
* Make reads over block boundaries work too
*
* 04-14-2004 tglx: first working version for 2k page size chips
- *
+ *
* 05-19-2004 tglx: Basic support for Renesas AG-AND chips
*
* 09-24-2004 tglx: add support for hardware controllers (e.g. ECC) shared
* from Ben Dooks <ben-mtd@fluff.org>
*
* Credits:
- * David Woodhouse for adding multichip support
- *
+ * David Woodhouse for adding multichip support
+ *
* Aleph One Ltd. and Toby Churchill Ltd. for supporting the
* rework for 2K page size chips
*
#include <linux/mtd/partitions.h>
#endif
-#else
+#endif
#include <common.h>
#include <jffs2/jffs2.h>
#endif
-#endif
-
/* Define default oob placement schemes for large and small page devices */
static struct nand_oobinfo nand_oob_8 = {
.useecc = MTD_NANDECC_AUTOPLACE,
.useecc = MTD_NANDECC_AUTOPLACE,
.eccbytes = 24,
.eccpos = {
- 40, 41, 42, 43, 44, 45, 46, 47,
- 48, 49, 50, 51, 52, 53, 54, 55,
+ 40, 41, 42, 43, 44, 45, 46, 47,
+ 48, 49, 50, 51, 52, 53, 54, 55,
56, 57, 58, 59, 60, 61, 62, 63},
.oobfree = { {2, 38} }
};
static int nand_write_page (struct mtd_info *mtd, struct nand_chip *this, int page, u_char *oob_buf,
struct nand_oobinfo *oobsel, int mode);
#ifdef CONFIG_MTD_NAND_VERIFY_WRITE
-static int nand_verify_pages (struct mtd_info *mtd, struct nand_chip *this, int page, int numpages,
+static int nand_verify_pages (struct mtd_info *mtd, struct nand_chip *this, int page, int numpages,
u_char *oob_buf, struct nand_oobinfo *oobsel, int chipnr, int oobmode);
#else
#define nand_verify_pages(...) (0)
#endif
-
+
static void nand_get_device (struct nand_chip *this, struct mtd_info *mtd, int new_state);
/**
* nand_release_device - [GENERIC] release chip
* @mtd: MTD device structure
- *
- * Deselect, release chip lock and wake up anyone waiting on the device
+ *
+ * Deselect, release chip lock and wake up anyone waiting on the device
*/
/* XXX U-BOOT XXX */
#if 0
* nand_read_byte16 - [DEFAULT] read one byte endianess aware from the chip
* @mtd: MTD device structure
*
- * Default read function for 16bit buswith with
+ * Default read function for 16bit buswith with
* endianess conversion
*/
static u_char nand_read_byte16(struct mtd_info *mtd)
* nand_read_word - [DEFAULT] read one word from the chip
* @mtd: MTD device structure
*
- * Default read function for 16bit buswith without
+ * Default read function for 16bit buswith without
* endianess conversion
*/
static u16 nand_read_word(struct mtd_info *mtd)
* @mtd: MTD device structure
* @word: data word to write
*
- * Default write function for 16bit buswith without
+ * Default write function for 16bit buswith without
* endianess conversion
*/
static void nand_write_word(struct mtd_info *mtd, u16 word)
struct nand_chip *this = mtd->priv;
switch(chip) {
case -1:
- this->hwcontrol(mtd, NAND_CTL_CLRNCE);
+ this->hwcontrol(mtd, NAND_CTL_CLRNCE);
break;
case 0:
this->hwcontrol(mtd, NAND_CTL_SETNCE);
}
/**
- * nand_read_buf - [DEFAULT] read chip data into buffer
+ * nand_read_buf - [DEFAULT] read chip data into buffer
* @mtd: MTD device structure
* @buf: buffer to store date
* @len: number of bytes to read
}
/**
- * nand_verify_buf - [DEFAULT] Verify chip data against buffer
+ * nand_verify_buf - [DEFAULT] Verify chip data against buffer
* @mtd: MTD device structure
* @buf: buffer containing the data to compare
* @len: number of bytes to compare
struct nand_chip *this = mtd->priv;
u16 *p = (u16 *) buf;
len >>= 1;
-
+
for (i=0; i<len; i++)
writew(p[i], this->IO_ADDR_W);
-
+
}
/**
- * nand_read_buf16 - [DEFAULT] read chip data into buffer
+ * nand_read_buf16 - [DEFAULT] read chip data into buffer
* @mtd: MTD device structure
* @buf: buffer to store date
* @len: number of bytes to read
}
/**
- * nand_verify_buf16 - [DEFAULT] Verify chip data against buffer
+ * nand_verify_buf16 - [DEFAULT] Verify chip data against buffer
* @mtd: MTD device structure
* @buf: buffer containing the data to compare
* @len: number of bytes to compare
* @ofs: offset from device start
* @getchip: 0, if the chip is already selected
*
- * Check, if the block is bad.
+ * Check, if the block is bad.
*/
static int nand_block_bad(struct mtd_info *mtd, loff_t ofs, int getchip)
{
/* Select the NAND device */
this->select_chip(mtd, chipnr);
- } else
- page = (int) ofs;
+ } else
+ page = (int) ofs;
if (this->options & NAND_BUSWIDTH_16) {
this->cmdfunc (mtd, NAND_CMD_READOOB, this->badblockpos & 0xFE, page & this->pagemask);
if (this->read_byte(mtd) != 0xff)
res = 1;
}
-
+
if (getchip) {
/* Deselect and wake up anyone waiting on the device */
nand_release_device(mtd);
- }
-
+ }
+
return res;
}
u_char buf[2] = {0, 0};
size_t retlen;
int block;
-
+
/* Get block number */
block = ((int) ofs) >> this->bbt_erase_shift;
this->bbt[block >> 2] |= 0x01 << ((block & 0x03) << 1);
/* Do we have a flash based bad block table ? */
if (this->options & NAND_USE_FLASH_BBT)
return nand_update_bbt (mtd, ofs);
-
+
/* We write two bytes, so we dont have to mess with 16 bit access */
ofs += mtd->oobsize + (this->badblockpos & ~0x01);
return nand_write_oob (mtd, ofs , 2, &retlen, buf);
}
-/**
+/**
* nand_check_wp - [GENERIC] check if the chip is write protected
* @mtd: MTD device structure
- * Check, if the device is write protected
+ * Check, if the device is write protected
*
- * The function expects, that the device is already selected
+ * The function expects, that the device is already selected
*/
static int nand_check_wp (struct mtd_info *mtd)
{
struct nand_chip *this = mtd->priv;
/* Check the WP bit */
this->cmdfunc (mtd, NAND_CMD_STATUS, -1, -1);
- return (this->read_byte(mtd) & 0x80) ? 0 : 1;
+ return (this->read_byte(mtd) & 0x80) ? 0 : 1;
}
/**
static int nand_block_checkbad (struct mtd_info *mtd, loff_t ofs, int getchip, int allowbbt)
{
struct nand_chip *this = mtd->priv;
-
+
if (!this->bbt)
return this->block_bad(mtd, ofs, getchip);
-
+
/* Return info from the table */
return nand_isbad_bbt (mtd, ofs, allowbbt);
}
/* Latch in address */
this->hwcontrol(mtd, NAND_CTL_CLRALE);
}
-
- /*
- * program and erase have their own busy handlers
+
+ /*
+ * program and erase have their own busy handlers
* status and sequential in needs no delay
*/
switch (command) {
-
+
case NAND_CMD_PAGEPROG:
case NAND_CMD_ERASE1:
case NAND_CMD_ERASE2:
return;
case NAND_CMD_RESET:
- if (this->dev_ready)
+ if (this->dev_ready)
break;
udelay(this->chip_delay);
this->hwcontrol(mtd, NAND_CTL_SETCLE);
while ( !(this->read_byte(mtd) & 0x40));
return;
- /* This applies to read commands */
+ /* This applies to read commands */
default:
- /*
+ /*
* If we don't have access to the busy pin, we apply the given
* command delay
*/
if (!this->dev_ready) {
udelay (this->chip_delay);
return;
- }
+ }
}
-
+
/* Apply this short delay always to ensure that we do wait tWB in
* any case on any machine. */
ndelay (100);
column += mtd->oobblock;
command = NAND_CMD_READ0;
}
-
-
+
+
/* Begin command latch cycle */
this->hwcontrol(mtd, NAND_CTL_SETCLE);
/* Write out the command to the device. */
column >>= 1;
this->write_byte(mtd, column & 0xff);
this->write_byte(mtd, column >> 8);
- }
+ }
if (page_addr != -1) {
this->write_byte(mtd, (unsigned char) (page_addr & 0xff));
this->write_byte(mtd, (unsigned char) ((page_addr >> 8) & 0xff));
/* Latch in address */
this->hwcontrol(mtd, NAND_CTL_CLRALE);
}
-
- /*
- * program and erase have their own busy handlers
+
+ /*
+ * program and erase have their own busy handlers
* status and sequential in needs no delay
*/
switch (command) {
-
+
case NAND_CMD_CACHEDPROG:
case NAND_CMD_PAGEPROG:
case NAND_CMD_ERASE1:
case NAND_CMD_RESET:
- if (this->dev_ready)
+ if (this->dev_ready)
break;
udelay(this->chip_delay);
this->hwcontrol(mtd, NAND_CTL_SETCLE);
/* End command latch cycle */
this->hwcontrol(mtd, NAND_CTL_CLRCLE);
/* Fall through into ready check */
-
- /* This applies to read commands */
+
+ /* This applies to read commands */
default:
- /*
+ /*
* If we don't have access to the busy pin, we apply the given
* command delay
*/
if (!this->dev_ready) {
udelay (this->chip_delay);
return;
- }
+ }
}
-
+
/* Apply this short delay always to ensure that we do wait tWB in
* any case on any machine. */
ndelay (100);
* nand_get_device - [GENERIC] Get chip for selected access
* @this: the nand chip descriptor
* @mtd: MTD device structure
- * @new_state: the state which is requested
+ * @new_state: the state which is requested
*
* Get the device and lock it for exclusive access
*/
DECLARE_WAITQUEUE (wait, current);
- /*
- * Grab the lock and see if the device is available
+ /*
+ * Grab the lock and see if the device is available
*/
retry:
/* Hardware controller shared among independend devices */
this->controller->active = this;
spin_unlock (&this->controller->lock);
}
-
+
if (active == this) {
spin_lock (&this->chip_lock);
if (this->state == FL_READY) {
spin_unlock (&this->chip_lock);
return;
}
- }
+ }
set_current_state (TASK_UNINTERRUPTIBLE);
add_wait_queue (&active->wq, &wait);
spin_unlock (&active->chip_lock);
* @state: state to select the max. timeout value
*
* Wait for command done. This applies to erase and program only
- * Erase can take up to 400ms and program up to 20ms according to
+ * Erase can take up to 400ms and program up to 20ms according to
* general NAND and SmartMedia specs
*
*/
{
unsigned long timeo = jiffies;
int status;
-
+
if (state == FL_ERASING)
timeo += (HZ * 400) / 1000;
else
if ((state == FL_ERASING) && (this->options & NAND_IS_AND))
this->cmdfunc (mtd, NAND_CMD_STATUS_MULTI, -1, -1);
- else
+ else
this->cmdfunc (mtd, NAND_CMD_STATUS, -1, -1);
- while (time_before(jiffies, timeo)) {
+ while (time_before(jiffies, timeo)) {
/* Check, if we were interrupted */
if (this->state != state)
return 0;
if (this->dev_ready) {
if (this->dev_ready(mtd))
- break;
+ break;
} else {
if (this->read_byte(mtd) & NAND_STATUS_READY)
break;
*
* Cached programming is not supported yet.
*/
-static int nand_write_page (struct mtd_info *mtd, struct nand_chip *this, int page,
+static int nand_write_page (struct mtd_info *mtd, struct nand_chip *this, int page,
u_char *oob_buf, struct nand_oobinfo *oobsel, int cached)
{
int i, status;
int *oob_config = oobsel->eccpos;
int datidx = 0, eccidx = 0, eccsteps = this->eccsteps;
int eccbytes = 0;
-
+
/* FIXME: Enable cached programming */
cached = 0;
-
+
/* Send command to begin auto page programming */
this->cmdfunc (mtd, NAND_CMD_SEQIN, 0x00, page);
printk (KERN_WARNING "Writing data without ECC to NAND-FLASH is not recommended\n");
this->write_buf(mtd, this->data_poi, mtd->oobblock);
break;
-
+
/* Software ecc 3/256, write all */
case NAND_ECC_SOFT:
for (; eccsteps; eccsteps--) {
}
break;
}
-
+
/* Write out OOB data */
if (this->options & NAND_HWECC_SYNDROME)
this->write_buf(mtd, &oob_buf[oobsel->eccbytes], mtd->oobsize - oobsel->eccbytes);
- else
+ else
this->write_buf(mtd, oob_buf, mtd->oobsize);
/* Send command to actually program the data */
} else {
/* FIXME: Implement cached programming ! */
/* wait until cache is ready*/
- // status = this->waitfunc (mtd, this, FL_CACHEDRPG);
+ /* status = this->waitfunc (mtd, this, FL_CACHEDRPG); */
}
- return 0;
+ return 0;
}
#ifdef CONFIG_MTD_NAND_VERIFY_WRITE
* @oobmode: 1 = full buffer verify, 0 = ecc only
*
* The NAND device assumes that it is always writing to a cleanly erased page.
- * Hence, it performs its internal write verification only on bits that
+ * Hence, it performs its internal write verification only on bits that
* transitioned from 1 to 0. The device does NOT verify the whole page on a
- * byte by byte basis. It is possible that the page was not completely erased
- * or the page is becoming unusable due to wear. The read with ECC would catch
- * the error later when the ECC page check fails, but we would rather catch
+ * byte by byte basis. It is possible that the page was not completely erased
+ * or the page is becoming unusable due to wear. The read with ECC would catch
+ * the error later when the ECC page check fails, but we would rather catch
* it early in the page write stage. Better to write no data than invalid data.
*/
-static int nand_verify_pages (struct mtd_info *mtd, struct nand_chip *this, int page, int numpages,
+static int nand_verify_pages (struct mtd_info *mtd, struct nand_chip *this, int page, int numpages,
u_char *oob_buf, struct nand_oobinfo *oobsel, int chipnr, int oobmode)
{
int i, j, datidx = 0, oobofs = 0, res = -EIO;
int eccsteps = this->eccsteps;
- int hweccbytes;
+ int hweccbytes;
u_char oobdata[64];
hweccbytes = (this->options & NAND_HWECC_SYNDROME) ? (oobsel->eccbytes / eccsteps) : 0;
if (oobsel->useecc != MTD_NANDECC_OFF && !hweccbytes) {
int ecccnt = oobsel->eccbytes;
-
+
for (i = 0; i < ecccnt; i++) {
int idx = oobsel->eccpos[i];
if (oobdata[idx] != oob_buf[oobofs + idx] ) {
goto out;
}
}
- }
+ }
}
oobofs += mtd->oobsize - hweccbytes * eccsteps;
page++;
numpages--;
- /* Apply delay or wait for ready/busy pin
+ /* Apply delay or wait for ready/busy pin
* Do this before the AUTOINCR check, so no problems
* arise if a chip which does auto increment
* is marked as NOAUTOINCR by the board driver.
* Do this also before returning, so the chip is
* ready for the next command.
*/
- if (!this->dev_ready)
+ if (!this->dev_ready)
udelay (this->chip_delay);
else
- while (!this->dev_ready(mtd));
+ while (!this->dev_ready(mtd));
/* All done, return happy */
if (!numpages)
return 0;
-
-
- /* Check, if the chip supports auto page increment */
+
+
+ /* Check, if the chip supports auto page increment */
if (!NAND_CANAUTOINCR(this))
this->cmdfunc (mtd, NAND_CMD_READ0, 0x00, page);
}
- /*
+ /*
* Terminate the read command. We come here in case of an error
* So we must issue a reset command.
*/
-out:
+out:
this->cmdfunc (mtd, NAND_CMD_RESET, -1, -1);
return res;
}
static int nand_read (struct mtd_info *mtd, loff_t from, size_t len, size_t * retlen, u_char * buf)
{
return nand_read_ecc (mtd, from, len, retlen, buf, NULL, NULL);
-}
+}
/**
u_char *data_poi, *oob_data = oob_buf;
u_char ecc_calc[32];
u_char ecc_code[32];
- int eccmode, eccsteps;
+ int eccmode, eccsteps;
int *oob_config, datidx;
int blockcheck = (1 << (this->phys_erase_shift - this->page_shift)) - 1;
int eccbytes;
/* use userspace supplied oobinfo, if zero */
if (oobsel == NULL)
oobsel = &mtd->oobinfo;
-
+
/* Autoplace of oob data ? Use the default placement scheme */
if (oobsel->useecc == MTD_NANDECC_AUTOPLACE)
oobsel = this->autooob;
-
+
eccmode = oobsel->useecc ? this->eccmode : NAND_ECC_NONE;
oob_config = oobsel->eccpos;
end = mtd->oobblock;
ecc = this->eccsize;
eccbytes = this->eccbytes;
-
+
if ((eccmode == NAND_ECC_NONE) || (this->options & NAND_HWECC_SYNDROME))
compareecc = 0;
oobreadlen = mtd->oobsize;
- if (this->options & NAND_HWECC_SYNDROME)
+ if (this->options & NAND_HWECC_SYNDROME)
oobreadlen -= oobsel->eccbytes;
/* Loop until all data read */
while (read < len) {
-
+
int aligned = (!col && (len - read) >= end);
- /*
+ /*
* If the read is not page aligned, we have to read into data buffer
* due to ecc, else we read into return buffer direct
*/
if (aligned)
data_poi = &buf[read];
- else
+ else
data_poi = this->data_buf;
-
- /* Check, if we have this page in the buffer
+
+ /* Check, if we have this page in the buffer
*
* FIXME: Make it work when we must provide oob data too,
* check the usage of data_buf oob field
if (sndcmd) {
this->cmdfunc (mtd, NAND_CMD_READ0, 0x00, page);
sndcmd = 0;
- }
+ }
/* get oob area, if we have no oob buffer from fs-driver */
if (!oob_buf || oobsel->useecc == MTD_NANDECC_AUTOPLACE ||
oob_data = &this->data_buf[end];
eccsteps = this->eccsteps;
-
+
switch (eccmode) {
case NAND_ECC_NONE: { /* No ECC, Read in a page */
/* XXX U-BOOT XXX */
this->read_buf(mtd, data_poi, end);
break;
}
-
+
case NAND_ECC_SOFT: /* Software ECC 3/256: Read in a page + oob data */
this->read_buf(mtd, data_poi, end);
- for (i = 0, datidx = 0; eccsteps; eccsteps--, i+=3, datidx += ecc)
+ for (i = 0, datidx = 0; eccsteps; eccsteps--, i+=3, datidx += ecc)
this->calculate_ecc(mtd, &data_poi[datidx], &ecc_calc[i]);
- break;
+ break;
default:
for (i = 0, datidx = 0; eccsteps; eccsteps--, i+=eccbytes, datidx += ecc) {
* generator for an error, reads back the syndrome and
* does the error correction on the fly */
if (this->correct_data(mtd, &data_poi[datidx], &oob_data[i], &ecc_code[i]) == -1) {
- DEBUG (MTD_DEBUG_LEVEL0, "nand_read_ecc: "
+ DEBUG (MTD_DEBUG_LEVEL0, "nand_read_ecc: "
"Failed ECC read, page 0x%08x on chip %d\n", page, chipnr);
ecc_failed++;
}
} else {
this->calculate_ecc(mtd, &data_poi[datidx], &ecc_calc[i]);
- }
+ }
}
- break;
+ break;
}
/* read oobdata */
/* Skip ECC check, if not requested (ECC_NONE or HW_ECC with syndromes) */
if (!compareecc)
- goto readoob;
-
+ goto readoob;
+
/* Pick the ECC bytes out of the oob data */
for (j = 0; j < oobsel->eccbytes; j++)
ecc_code[j] = oob_data[oob_config[j]];
/* correct data, if neccecary */
for (i = 0, j = 0, datidx = 0; i < this->eccsteps; i++, datidx += ecc) {
ecc_status = this->correct_data(mtd, &data_poi[datidx], &ecc_code[j], &ecc_calc[j]);
-
+
/* Get next chunk of ecc bytes */
j += eccbytes;
-
- /* Check, if we have a fs supplied oob-buffer,
+
+ /* Check, if we have a fs supplied oob-buffer,
* This is the legacy mode. Used by YAFFS1
* Should go away some day
*/
- if (oob_buf && oobsel->useecc == MTD_NANDECC_PLACE) {
+ if (oob_buf && oobsel->useecc == MTD_NANDECC_PLACE) {
int *p = (int *)(&oob_data[mtd->oobsize]);
p[i] = ecc_status;
}
-
- if (ecc_status == -1) {
+
+ if (ecc_status == -1) {
DEBUG (MTD_DEBUG_LEVEL0, "nand_read_ecc: " "Failed ECC read, page 0x%08x\n", page);
ecc_failed++;
}
- }
+ }
readoob:
/* check, if we have a fs supplied oob-buffer */
}
readdata:
/* Partial page read, transfer data into fs buffer */
- if (!aligned) {
+ if (!aligned) {
for (j = col; j < end && read < len; j++)
buf[read++] = data_poi[j];
- this->pagebuf = realpage;
- } else
+ this->pagebuf = realpage;
+ } else
read += mtd->oobblock;
- /* Apply delay or wait for ready/busy pin
+ /* Apply delay or wait for ready/busy pin
* Do this before the AUTOINCR check, so no problems
* arise if a chip which does auto increment
* is marked as NOAUTOINCR by the board driver.
*/
- if (!this->dev_ready)
+ if (!this->dev_ready)
udelay (this->chip_delay);
else
- while (!this->dev_ready(mtd));
-
+ while (!this->dev_ready(mtd));
+
if (read == len)
- break;
+ break;
/* For subsequent reads align to page boundary. */
col = 0;
this->select_chip(mtd, -1);
this->select_chip(mtd, chipnr);
}
- /* Check, if the chip supports auto page increment
- * or if we have hit a block boundary.
- */
+ /* Check, if the chip supports auto page increment
+ * or if we have hit a block boundary.
+ */
if (!NAND_CANAUTOINCR(this) || !(page & blockcheck))
- sndcmd = 1;
+ sndcmd = 1;
}
/* Deselect and wake up anyone waiting on the device */
/* Shift to get page */
page = (int)(from >> this->page_shift);
chipnr = (int)(from >> this->chip_shift);
-
+
/* Mask to get column */
col = from & (mtd->oobsize - 1);
/* Send the read command */
this->cmdfunc (mtd, NAND_CMD_READOOB, col, page & this->pagemask);
- /*
+ /*
* Read the data, if we read more than one page
* oob data, let the device transfer the data !
*/
thislen = min_t(int, thislen, len);
this->read_buf(mtd, &buf[i], thislen);
i += thislen;
-
- /* Apply delay or wait for ready/busy pin
+
+ /* Apply delay or wait for ready/busy pin
* Do this before the AUTOINCR check, so no problems
* arise if a chip which does auto increment
* is marked as NOAUTOINCR by the board driver.
*/
- if (!this->dev_ready)
+ if (!this->dev_ready)
udelay (this->chip_delay);
else
- while (!this->dev_ready(mtd));
+ while (!this->dev_ready(mtd));
/* Read more ? */
if (i < len) {
this->select_chip(mtd, -1);
this->select_chip(mtd, chipnr);
}
-
- /* Check, if the chip supports auto page increment
- * or if we have hit a block boundary.
- */
+
+ /* Check, if the chip supports auto page increment
+ * or if we have hit a block boundary.
+ */
if (!NAND_CANAUTOINCR(this) || !(page & blockcheck)) {
/* For subsequent page reads set offset to 0 */
- this->cmdfunc (mtd, NAND_CMD_READOOB, 0x0, page & this->pagemask);
+ this->cmdfunc (mtd, NAND_CMD_READOOB, 0x0, page & this->pagemask);
}
}
}
nand_get_device (this, mtd , FL_READING);
this->select_chip (mtd, chip);
-
+
/* Add requested oob length */
len += ooblen;
-
+
while (len) {
if (sndcmd)
this->cmdfunc (mtd, NAND_CMD_READ0, 0, page & this->pagemask);
- sndcmd = 0;
+ sndcmd = 0;
this->read_buf (mtd, &buf[cnt], pagesize);
len -= pagesize;
cnt += pagesize;
page++;
-
- if (!this->dev_ready)
+
+ if (!this->dev_ready)
udelay (this->chip_delay);
else
- while (!this->dev_ready(mtd));
-
- /* Check, if the chip supports auto page increment */
+ while (!this->dev_ready(mtd));
+
+ /* Check, if the chip supports auto page increment */
if (!NAND_CANAUTOINCR(this) || !(page & blockcheck))
sndcmd = 1;
}
}
-/**
- * nand_prepare_oobbuf - [GENERIC] Prepare the out of band buffer
+/**
+ * nand_prepare_oobbuf - [GENERIC] Prepare the out of band buffer
* @mtd: MTD device structure
* @fsbuf: buffer given by fs driver
* @oobsel: out of band selection structre
int i, len, ofs;
/* Zero copy fs supplied buffer */
- if (fsbuf && !autoplace)
+ if (fsbuf && !autoplace)
return fsbuf;
/* Check, if the buffer must be filled with ff again */
- if (this->oobdirty) {
- memset (this->oob_buf, 0xff,
+ if (this->oobdirty) {
+ memset (this->oob_buf, 0xff,
mtd->oobsize << (this->phys_erase_shift - this->page_shift));
this->oobdirty = 0;
- }
-
+ }
+
/* If we have no autoplacement or no fs buffer use the internal one */
if (!autoplace || !fsbuf)
return this->oob_buf;
-
+
/* Walk through the pages and place the data */
this->oobdirty = 1;
ofs = 0;
{
return (nand_write_ecc (mtd, to, len, retlen, buf, NULL, NULL));
}
-
+
/**
* nand_write_ecc - [MTD Interface] NAND write with ECC
* @mtd: MTD device structure
return -EINVAL;
}
- /* reject writes, which are not page aligned */
+ /* reject writes, which are not page aligned */
if (NOTALIGNED (to) || NOTALIGNED(len)) {
printk (KERN_NOTICE "nand_write_ecc: Attempt to write not page aligned data\n");
return -EINVAL;
goto out;
/* if oobsel is NULL, use chip defaults */
- if (oobsel == NULL)
- oobsel = &mtd->oobinfo;
-
+ if (oobsel == NULL)
+ oobsel = &mtd->oobinfo;
+
/* Autoplace of oob data ? Use the default placement scheme */
if (oobsel->useecc == MTD_NANDECC_AUTOPLACE) {
oobsel = this->autooob;
autoplace = 1;
- }
+ }
if (oobsel->useecc == MTD_NANDECC_AUTOPL_USR)
autoplace = 1;
totalpages = len >> this->page_shift;
page = (int) (to >> this->page_shift);
/* Invalidate the page cache, if we write to the cached page */
- if (page <= this->pagebuf && this->pagebuf < (page + totalpages))
+ if (page <= this->pagebuf && this->pagebuf < (page + totalpages))
this->pagebuf = -1;
-
+
/* Set it relative to chip */
page &= this->pagemask;
startpage = page;
if (ret) {
DEBUG (MTD_DEBUG_LEVEL0, "nand_write_ecc: write_page failed %d\n", ret);
goto out;
- }
+ }
/* Next oob page */
oob += mtd->oobsize;
/* Update written bytes count */
written += mtd->oobblock;
- if (written == len)
+ if (written == len)
goto cmp;
-
+
/* Increment page address */
page++;
if (!(page & (ppblock - 1))){
int ofs;
this->data_poi = bufstart;
- ret = nand_verify_pages (mtd, this, startpage,
+ ret = nand_verify_pages (mtd, this, startpage,
page - startpage,
oobbuf, oobsel, chipnr, (eccbuf != NULL));
if (ret) {
DEBUG (MTD_DEBUG_LEVEL0, "nand_write_ecc: verify_pages failed %d\n", ret);
goto out;
- }
+ }
*retlen = written;
ofs = autoplace ? mtd->oobavail : mtd->oobsize;
numpages = min (totalpages, ppblock);
page &= this->pagemask;
startpage = page;
- oobbuf = nand_prepare_oobbuf (mtd, eccbuf, oobsel,
+ oobbuf = nand_prepare_oobbuf (mtd, eccbuf, oobsel,
autoplace, numpages);
/* Check, if we cross a chip boundary */
if (!page) {
oobbuf, oobsel, chipnr, (eccbuf != NULL));
if (!ret)
*retlen = written;
- else
+ else
DEBUG (MTD_DEBUG_LEVEL0, "nand_write_ecc: verify_pages failed %d\n", ret);
out:
/* Check, if it is write protected */
if (nand_check_wp(mtd))
goto out;
-
+
/* Invalidate the page cache, if we write to the cached page */
if (page == this->pagebuf)
this->pagebuf = -1;
*
* NAND write with kvec. This just calls the ecc function
*/
-static int nand_writev (struct mtd_info *mtd, const struct kvec *vecs, unsigned long count,
+static int nand_writev (struct mtd_info *mtd, const struct kvec *vecs, unsigned long count,
loff_t to, size_t * retlen)
{
- return (nand_writev_ecc (mtd, vecs, count, to, retlen, NULL, NULL));
+ return (nand_writev_ecc (mtd, vecs, count, to, retlen, NULL, NULL));
}
/**
*
* NAND write with iovec with ecc
*/
-static int nand_writev_ecc (struct mtd_info *mtd, const struct kvec *vecs, unsigned long count,
+static int nand_writev_ecc (struct mtd_info *mtd, const struct kvec *vecs, unsigned long count,
loff_t to, size_t * retlen, u_char *eccbuf, struct nand_oobinfo *oobsel)
{
int i, page, len, total_len, ret = -EIO, written = 0, chipnr;
return -EINVAL;
}
- /* reject writes, which are not page aligned */
+ /* reject writes, which are not page aligned */
if (NOTALIGNED (to) || NOTALIGNED(total_len)) {
printk (KERN_NOTICE "nand_write_ecc: Attempt to write not page aligned data\n");
return -EINVAL;
goto out;
/* if oobsel is NULL, use chip defaults */
- if (oobsel == NULL)
- oobsel = &mtd->oobinfo;
+ if (oobsel == NULL)
+ oobsel = &mtd->oobinfo;
/* Autoplace of oob data ? Use the default placement scheme */
if (oobsel->useecc == MTD_NANDECC_AUTOPLACE) {
oobsel = this->autooob;
autoplace = 1;
- }
+ }
if (oobsel->useecc == MTD_NANDECC_AUTOPL_USR)
autoplace = 1;
/* Setup start page */
page = (int) (to >> this->page_shift);
/* Invalidate the page cache, if we write to the cached page */
- if (page <= this->pagebuf && this->pagebuf < ((to + total_len) >> this->page_shift))
+ if (page <= this->pagebuf && this->pagebuf < ((to + total_len) >> this->page_shift))
this->pagebuf = -1;
startpage = page & this->pagemask;
oob = 0;
for (i = 1; i <= numpages; i++) {
/* Write one page. If this is the last page to write
- * then use the real pageprogram command, else select
+ * then use the real pageprogram command, else select
* cached programming if supported by the chip.
*/
- ret = nand_write_page (mtd, this, page & this->pagemask,
+ ret = nand_write_page (mtd, this, page & this->pagemask,
&oobbuf[oob], oobsel, i != numpages);
if (ret)
goto out;
count--;
}
} else {
- /* We must use the internal buffer, read data out of each
+ /* We must use the internal buffer, read data out of each
* tuple until we have a full page to write
*/
int cnt = 0;
while (cnt < mtd->oobblock) {
- if (vecs->iov_base != NULL && vecs->iov_len)
+ if (vecs->iov_base != NULL && vecs->iov_len)
this->data_buf[cnt++] = ((u_char *) vecs->iov_base)[len++];
/* Check, if we have to switch to the next tuple */
if (len >= (int) vecs->iov_len) {
count--;
}
}
- this->pagebuf = page;
- this->data_poi = this->data_buf;
+ this->pagebuf = page;
+ this->data_poi = this->data_buf;
bufstart = this->data_poi;
- numpages = 1;
+ numpages = 1;
oobbuf = nand_prepare_oobbuf (mtd, NULL, oobsel, autoplace, numpages);
ret = nand_write_page (mtd, this, page & this->pagemask,
oobbuf, oobsel, 0);
ret = nand_verify_pages (mtd, this, startpage, numpages, oobbuf, oobsel, chipnr, 0);
if (ret)
goto out;
-
+
written += mtd->oobblock * numpages;
/* All done ? */
if (!count)
{
return nand_erase_nand (mtd, instr, 0);
}
-
+
/**
* nand_erase_intern - [NAND Interface] erase block(s)
* @mtd: MTD device structure
instr->state = MTD_ERASE_FAILED;
goto erase_exit;
}
-
- /* Invalidate the page cache, if we erase the block which contains
+
+ /* Invalidate the page cache, if we erase the block which contains
the current cached page */
if (page <= this->pagebuf && this->pagebuf < (page + pages_per_block))
this->pagebuf = -1;
this->erase_cmd (mtd, page & this->pagemask);
-
+
status = this->waitfunc (mtd, this, FL_ERASING);
/* See if block erase succeeded */
instr->fail_addr = (page << this->page_shift);
goto erase_exit;
}
-
+
/* Increment page address and decrement length */
len -= (1 << this->phys_erase_shift);
page += pages_per_block;
static int nand_block_isbad (struct mtd_info *mtd, loff_t ofs)
{
/* Check for invalid offset */
- if (ofs > mtd->size)
+ if (ofs > mtd->size)
return -EINVAL;
-
+
return nand_block_checkbad (mtd, ofs, 1, 0);
}
struct nand_chip *this = mtd->priv;
int ret;
- if ((ret = nand_block_isbad(mtd, ofs))) {
- /* If it was bad already, return success and do nothing. */
+ if ((ret = nand_block_isbad(mtd, ofs))) {
+ /* If it was bad already, return success and do nothing. */
if (ret > 0)
return 0;
- return ret;
- }
+ return ret;
+ }
return this->block_markbad(mtd, ofs);
}
/* Print and store flash device information */
for (i = 0; nand_flash_ids[i].name != NULL; i++) {
-
- if (nand_dev_id != nand_flash_ids[i].id)
+
+ if (nand_dev_id != nand_flash_ids[i].id)
continue;
if (!mtd->name) mtd->name = nand_flash_ids[i].name;
this->chipsize = nand_flash_ids[i].chipsize << 20;
-
+
/* New devices have all the information in additional id bytes */
if (!nand_flash_ids[i].pagesize) {
int extid;
extid >>= 2;
/* Get buswidth information */
busw = (extid & 0x01) ? NAND_BUSWIDTH_16 : 0;
-
+
} else {
/* Old devices have this data hardcoded in the
* device id table */
* this correct ! */
if (busw != (this->options & NAND_BUSWIDTH_16)) {
printk (KERN_INFO "NAND device: Manufacturer ID:"
- " 0x%02x, Chip ID: 0x%02x (%s %s)\n", nand_maf_id, nand_dev_id,
+ " 0x%02x, Chip ID: 0x%02x (%s %s)\n", nand_maf_id, nand_dev_id,
nand_manuf_ids[i].name , mtd->name);
- printk (KERN_WARNING
- "NAND bus width %d instead %d bit\n",
+ printk (KERN_WARNING
+ "NAND bus width %d instead %d bit\n",
(this->options & NAND_BUSWIDTH_16) ? 16 : 8,
busw ? 16 : 8);
this->select_chip(mtd, -1);
- return 1;
+ return 1;
}
-
- /* Calculate the address shift from the page size */
+
+ /* Calculate the address shift from the page size */
this->page_shift = ffs(mtd->oobblock) - 1;
this->bbt_erase_shift = this->phys_erase_shift = ffs(mtd->erasesize) - 1;
this->chip_shift = ffs(this->chipsize) - 1;
/* Set the bad block position */
- this->badblockpos = mtd->oobblock > 512 ?
+ this->badblockpos = mtd->oobblock > 512 ?
NAND_LARGE_BADBLOCK_POS : NAND_SMALL_BADBLOCK_POS;
/* Get chip options, preserve non chip based options */
this->options |= NAND_NO_AUTOINCR;
/* Check if this is a not a samsung device. Do not clear the options
* for chips which are not having an extended id.
- */
+ */
if (nand_maf_id != NAND_MFR_SAMSUNG && !nand_flash_ids[i].pagesize)
this->options &= ~NAND_SAMSUNG_LP_OPTIONS;
-
+
/* Check for AND chips with 4 page planes */
if (this->options & NAND_4PAGE_ARRAY)
this->erase_cmd = multi_erase_cmd;
/* Do not replace user supplied command function ! */
if (mtd->oobblock > 512 && this->cmdfunc == nand_command)
this->cmdfunc = nand_command_lp;
-
+
/* Try to identify manufacturer */
for (j = 0; nand_manuf_ids[j].id != 0x0; j++) {
if (nand_manuf_ids[j].id == nand_maf_id)
break;
}
printk (KERN_INFO "NAND device: Manufacturer ID:"
- " 0x%02x, Chip ID: 0x%02x (%s %s)\n", nand_maf_id, nand_dev_id,
+ " 0x%02x, Chip ID: 0x%02x (%s %s)\n", nand_maf_id, nand_dev_id,
nand_manuf_ids[j].name , nand_flash_ids[i].name);
break;
}
}
if (i > 1)
printk(KERN_INFO "%d NAND chips detected\n", i);
-
+
/* Allocate buffers, if neccecary */
if (!this->oob_buf) {
size_t len;
}
this->options |= NAND_OOBBUF_ALLOC;
}
-
+
if (!this->data_buf) {
size_t len;
len = mtd->oobblock + mtd->oobsize;
if (!this->autooob) {
/* Select the appropriate default oob placement scheme for
* placement agnostic filesystems */
- switch (mtd->oobsize) {
+ switch (mtd->oobsize) {
case 8:
this->autooob = &nand_oob_8;
break;
/* BUG(); */
}
}
-
+
/* The number of bytes available for the filesystem to place fs dependend
* oob data */
if (this->options & NAND_BUSWIDTH_16) {
} else
mtd->oobavail = mtd->oobsize - (this->autooob->eccbytes + 1);
- /*
+ /*
* check ECC mode, default to software
* if 3byte/512byte hardware ECC is selected and we have 256 byte pagesize
- * fallback to software ECC
+ * fallback to software ECC
*/
- this->eccsize = 256; /* set default eccsize */
+ this->eccsize = 256; /* set default eccsize */
this->eccbytes = 3;
switch (this->eccmode) {
this->eccsize = 2048;
break;
- case NAND_ECC_HW3_512:
- case NAND_ECC_HW6_512:
- case NAND_ECC_HW8_512:
+ case NAND_ECC_HW3_512:
+ case NAND_ECC_HW6_512:
+ case NAND_ECC_HW8_512:
if (mtd->oobblock == 256) {
printk (KERN_WARNING "512 byte HW ECC not possible on 256 Byte pagesize, fallback to SW ECC \n");
this->eccmode = NAND_ECC_SOFT;
this->calculate_ecc = nand_calculate_ecc;
this->correct_data = nand_correct_data;
- } else
+ } else
this->eccsize = 512; /* set eccsize to 512 */
break;
-
+
case NAND_ECC_HW3_256:
break;
-
- case NAND_ECC_NONE:
+
+ case NAND_ECC_NONE:
printk (KERN_WARNING "NAND_ECC_NONE selected by board driver. This is not recommended !!\n");
this->eccmode = NAND_ECC_NONE;
break;
- case NAND_ECC_SOFT:
+ case NAND_ECC_SOFT:
this->calculate_ecc = nand_calculate_ecc;
this->correct_data = nand_correct_data;
break;
default:
printk (KERN_WARNING "Invalid NAND_ECC_MODE %d\n", this->eccmode);
/* BUG(); */
- }
+ }
- /* Check hardware ecc function availability and adjust number of ecc bytes per
+ /* Check hardware ecc function availability and adjust number of ecc bytes per
* calculation step
*/
switch (this->eccmode) {
case NAND_ECC_HW12_2048:
this->eccbytes += 4;
- case NAND_ECC_HW8_512:
+ case NAND_ECC_HW8_512:
this->eccbytes += 2;
- case NAND_ECC_HW6_512:
+ case NAND_ECC_HW6_512:
this->eccbytes += 3;
- case NAND_ECC_HW3_512:
+ case NAND_ECC_HW3_512:
case NAND_ECC_HW3_256:
if (this->calculate_ecc && this->correct_data && this->enable_hwecc)
break;
printk (KERN_WARNING "No ECC functions supplied, Hardware ECC not possible\n");
/* BUG(); */
}
-
+
mtd->eccsize = this->eccsize;
-
+
/* Set the number of read / write steps for one page to ensure ECC generation */
switch (this->eccmode) {
case NAND_ECC_HW12_2048:
this->eccsteps = mtd->oobblock / 512;
break;
case NAND_ECC_HW3_256:
- case NAND_ECC_SOFT:
+ case NAND_ECC_SOFT:
this->eccsteps = mtd->oobblock / 256;
break;
-
- case NAND_ECC_NONE:
+
+ case NAND_ECC_NONE:
this->eccsteps = 1;
break;
}
/* XXX U-BOOT XXX */
-#if 0
+#if 0
/* Initialize state, waitqueue and spinlock */
this->state = FL_READY;
init_waitqueue_head (&this->wq);
}
/**
- * nand_release - [NAND Interface] Free resources held by the NAND device
+ * nand_release - [NAND Interface] Free resources held by the NAND device
* @mtd: MTD device structure
-*/
+ */
void nand_release (struct mtd_info *mtd)
{
struct nand_chip *this = mtd->priv;
*
* Overview:
* Bad block table support for the NAND driver
- *
+ *
* Copyright (C) 2004 Thomas Gleixner (tglx@linutronix.de)
*
* $Id: nand_bbt.c,v 1.28 2004/11/13 10:19:09 gleixner Exp $
*
* Description:
*
- * When nand_scan_bbt is called, then it tries to find the bad block table
- * depending on the options in the bbt descriptor(s). If a bbt is found
- * then the contents are read and the memory based bbt is created. If a
+ * When nand_scan_bbt is called, then it tries to find the bad block table
+ * depending on the options in the bbt descriptor(s). If a bbt is found
+ * then the contents are read and the memory based bbt is created. If a
* mirrored bbt is selected then the mirror is searched too and the
- * versions are compared. If the mirror has a greater version number
+ * versions are compared. If the mirror has a greater version number
* than the mirror bbt is used to build the memory based bbt.
* If the tables are not versioned, then we "or" the bad block information.
- * If one of the bbt's is out of date or does not exist it is (re)created.
- * If no bbt exists at all then the device is scanned for factory marked
- * good / bad blocks and the bad block tables are created.
+ * If one of the bbt's is out of date or does not exist it is (re)created.
+ * If no bbt exists at all then the device is scanned for factory marked
+ * good / bad blocks and the bad block tables are created.
*
- * For manufacturer created bbts like the one found on M-SYS DOC devices
+ * For manufacturer created bbts like the one found on M-SYS DOC devices
* the bbt is searched and read but never created
*
- * The autogenerated bad block table is located in the last good blocks
- * of the device. The table is mirrored, so it can be updated eventually.
- * The table is marked in the oob area with an ident pattern and a version
+ * The autogenerated bad block table is located in the last good blocks
+ * of the device. The table is mirrored, so it can be updated eventually.
+ * The table is marked in the oob area with an ident pattern and a version
* number which indicates which of both tables is more up to date.
*
* The table uses 2 bits per block
* 01b: block is marked bad due to wear
* 10b: block is reserved (to protect the bbt area)
* 11b: block is factory marked bad
- *
+ *
* Multichip devices like DOC store the bad block info per floor.
*
* Following assumptions are made:
* - bbts start at a page boundary, if autolocated on a block boundary
* - the space neccecary for a bbt in FLASH does not exceed a block boundary
- *
+ *
*/
#include <common.h>
#include <asm/errno.h>
-/**
+/**
* check_pattern - [GENERIC] check if a pattern is in the buffer
* @buf: the buffer to search
* @len: the length of buffer to search
if (p[i] != 0xff)
return -1;
}
- }
+ }
p += end;
-
+
/* Compare the pattern */
for (i = 0; i < td->len; i++) {
if (p[i] != td->pattern[i])
* Read the bad block table starting from page.
*
*/
-static int read_bbt (struct mtd_info *mtd, uint8_t *buf, int page, int num,
+static int read_bbt (struct mtd_info *mtd, uint8_t *buf, int page, int num,
int bits, int offs, int reserved_block_code)
{
int res, i, j, act = 0;
totlen = (num * bits) >> 3;
from = ((loff_t)page) << this->page_shift;
-
+
while (totlen) {
len = min (totlen, (size_t) (1 << this->bbt_erase_shift));
res = mtd->read_ecc (mtd, from, len, &retlen, buf, NULL, this->autooob);
return res;
}
printk (KERN_WARNING "nand_bbt: ECC error while reading bad block table\n");
- }
+ }
/* Analyse data */
for (i = 0; i < len; i++) {
* message to MTD_DEBUG_LEVEL0 */
printk (KERN_DEBUG "nand_read_bbt: Bad block at 0x%08x\n",
((offs << 2) + (act >> 1)) << this->bbt_erase_shift);
- /* Factory marked bad or worn out ? */
+ /* Factory marked bad or worn out ? */
if (tmp == 0)
this->bbt[offs + (act >> 3)] |= 0x3 << (act & 0x06);
else
this->bbt[offs + (act >> 3)] |= 0x1 << (act & 0x06);
- }
+ }
}
totlen -= len;
from += len;
* read_abs_bbt - [GENERIC] Read the bad block table starting at a given page
* @mtd: MTD device structure
* @buf: temporary buffer
- * @td: descriptor for the bad block table
+ * @td: descriptor for the bad block table
* @chip: read the table for a specific chip, -1 read all chips.
* Applies only if NAND_BBT_PERCHIP option is set
*
* read_abs_bbts - [GENERIC] Read the bad block table(s) for all chips starting at a given page
* @mtd: MTD device structure
* @buf: temporary buffer
- * @td: descriptor for the bad block table
+ * @td: descriptor for the bad block table
* @md: descriptor for the bad block table mirror
*
* Read the bad block table(s) for all chips starting at a given page
{
struct nand_chip *this = mtd->priv;
- /* Read the primary version, if available */
+ /* Read the primary version, if available */
if (td->options & NAND_BBT_VERSION) {
- nand_read_raw (mtd, buf, td->pages[0] << this->page_shift, mtd->oobblock, mtd->oobsize);
+ nand_read_raw (mtd, buf, td->pages[0] << this->page_shift, mtd->oobblock, mtd->oobsize);
td->version[0] = buf[mtd->oobblock + td->veroffs];
printk (KERN_DEBUG "Bad block table at page %d, version 0x%02X\n", td->pages[0], td->version[0]);
}
- /* Read the mirror version, if available */
+ /* Read the mirror version, if available */
if (md && (md->options & NAND_BBT_VERSION)) {
- nand_read_raw (mtd, buf, md->pages[0] << this->page_shift, mtd->oobblock, mtd->oobsize);
+ nand_read_raw (mtd, buf, md->pages[0] << this->page_shift, mtd->oobblock, mtd->oobsize);
md->version[0] = buf[mtd->oobblock + md->veroffs];
printk (KERN_DEBUG "Bad block table at page %d, version 0x%02X\n", md->pages[0], md->version[0]);
}
else {
if (bd->options & NAND_BBT_SCAN2NDPAGE)
len = 2;
- else
+ else
len = 1;
}
scanlen = mtd->oobblock + mtd->oobsize;
if (chip >= this->numchips) {
printk (KERN_WARNING "create_bbt(): chipnr (%d) > available chips (%d)\n",
chip + 1, this->numchips);
- return;
+ return;
}
numblocks = this->chipsize >> (this->bbt_erase_shift - 1);
startblock = chip * numblocks;
numblocks += startblock;
from = startblock << (this->bbt_erase_shift - 1);
}
-
+
for (i = startblock; i < numblocks;) {
nand_read_raw (mtd, buf, from, readlen, ooblen);
for (j = 0; j < len; j++) {
if (check_pattern (&buf[j * scanlen], scanlen, mtd->oobblock, bd)) {
this->bbt[i >> 3] |= 0x03 << (i & 0x6);
- printk (KERN_WARNING "Bad eraseblock %d at 0x%08x\n",
+ printk (KERN_WARNING "Bad eraseblock %d at 0x%08x\n",
i >> 1, (unsigned int) from);
break;
}
* @td: descriptor for the bad block table
*
* Read the bad block table by searching for a given ident pattern.
- * Search is preformed either from the beginning up or from the end of
+ * Search is preformed either from the beginning up or from the end of
* the device downwards. The search starts always at the start of a
* block.
- * If the option NAND_BBT_PERCHIP is given, each chip is searched
+ * If the option NAND_BBT_PERCHIP is given, each chip is searched
* for a bbt, which contains the bad block information of this chip.
* This is neccecary to provide support for certain DOC devices.
*
- * The bbt ident pattern resides in the oob area of the first page
- * in a block.
+ * The bbt ident pattern resides in the oob area of the first page
+ * in a block.
*/
static int search_bbt (struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr *td)
{
startblock = (mtd->size >> this->bbt_erase_shift) -1;
dir = -1;
} else {
- startblock = 0;
+ startblock = 0;
dir = 1;
- }
-
+ }
+
/* Do we have a bbt per chip ? */
if (td->options & NAND_BBT_PERCHIP) {
chips = this->numchips;
chips = 1;
bbtblocks = mtd->size >> this->bbt_erase_shift;
}
-
+
/* Number of bits for each erase block in the bbt */
bits = td->options & NAND_BBT_NRBITS_MSK;
-
+
for (i = 0; i < chips; i++) {
/* Reset version information */
- td->version[i] = 0;
+ td->version[i] = 0;
td->pages[i] = -1;
/* Scan the maximum number of blocks */
for (block = 0; block < td->maxblocks; block++) {
int actblock = startblock + dir * block;
/* Read first page */
- nand_read_raw (mtd, buf, actblock << this->bbt_erase_shift, mtd->oobblock, mtd->oobsize);
+ nand_read_raw (mtd, buf, actblock << this->bbt_erase_shift, mtd->oobblock, mtd->oobsize);
if (!check_pattern(buf, scanlen, mtd->oobblock, td)) {
td->pages[i] = actblock << (this->bbt_erase_shift - this->page_shift);
if (td->options & NAND_BBT_VERSION) {
else
printk (KERN_DEBUG "Bad block table found at page %d, version 0x%02X\n", td->pages[i], td->version[i]);
}
- return 0;
+ return 0;
}
/**
* search_read_bbts - [GENERIC] scan the device for bad block table(s)
* @mtd: MTD device structure
* @buf: temporary buffer
- * @td: descriptor for the bad block table
+ * @td: descriptor for the bad block table
* @md: descriptor for the bad block table mirror
*
* Search and read the bad block table(s)
*/
-static int search_read_bbts (struct mtd_info *mtd, uint8_t *buf,
+static int search_read_bbts (struct mtd_info *mtd, uint8_t *buf,
struct nand_bbt_descr *td, struct nand_bbt_descr *md)
{
/* Search the primary table */
search_bbt (mtd, buf, td);
-
+
/* Search the mirror table */
if (md)
search_bbt (mtd, buf, md);
-
+
/* Force result check */
- return 1;
+ return 1;
}
-
-/**
+
+/**
* write_bbt - [GENERIC] (Re)write the bad block table
*
* @mtd: MTD device structure
* @buf: temporary buffer
- * @td: descriptor for the bad block table
+ * @td: descriptor for the bad block table
* @md: descriptor for the bad block table mirror
* @chipsel: selector for a specific chip, -1 for all
*
* (Re)write the bad block table
*
*/
-static int write_bbt (struct mtd_info *mtd, uint8_t *buf,
+static int write_bbt (struct mtd_info *mtd, uint8_t *buf,
struct nand_bbt_descr *td, struct nand_bbt_descr *md, int chipsel)
{
struct nand_chip *this = mtd->priv;
/* Write bad block table per chip rather than per device ? */
if (td->options & NAND_BBT_PERCHIP) {
numblocks = (int) (this->chipsize >> this->bbt_erase_shift);
- /* Full device write or specific chip ? */
+ /* Full device write or specific chip ? */
if (chipsel == -1) {
nrchips = this->numchips;
} else {
} else {
numblocks = (int) (mtd->size >> this->bbt_erase_shift);
nrchips = 1;
- }
-
+ }
+
/* Loop through the chips */
for (; chip < nrchips; chip++) {
-
- /* There was already a version of the table, reuse the page
- * This applies for absolute placement too, as we have the
+
+ /* There was already a version of the table, reuse the page
+ * This applies for absolute placement too, as we have the
* page nr. in td->pages.
*/
if (td->pages[chip] != -1) {
page = td->pages[chip];
goto write;
- }
+ }
/* Automatic placement of the bad block table */
/* Search direction top -> down ? */
} else {
startblock = chip * numblocks;
dir = 1;
- }
+ }
for (i = 0; i < td->maxblocks; i++) {
int block = startblock + dir * i;
}
printk (KERN_ERR "No space left to write bad block table\n");
return -ENOSPC;
-write:
+write:
/* Set up shift count and masks for the flash table */
bits = td->options & NAND_BBT_NRBITS_MSK;
case 8: sft = 0; sftmsk = 0x00; msk[0] = 0x00; msk[1] = 0x0F; msk[2] = ~rcode; msk[3] = 0xff; break;
default: return -EINVAL;
}
-
+
bbtoffs = chip * (numblocks >> 2);
-
+
to = ((loff_t) page) << this->page_shift;
memcpy (&oobinfo, this->autooob, sizeof(oobinfo));
oobinfo.useecc = MTD_NANDECC_PLACEONLY;
-
+
/* Must we save the block contents ? */
if (td->options & NAND_BBT_SAVECONTENT) {
/* Make it block aligned */
buf[len + td->veroffs] = td->version[chip];
}
}
-
+
/* walk through the memory table */
for (i = 0; i < numblocks; ) {
uint8_t dat;
dat >>= 2;
}
}
-
+
memset (&einfo, 0, sizeof (einfo));
einfo.mtd = mtd;
einfo.addr = (unsigned long) to;
printk (KERN_WARNING "nand_bbt: Error during block erase: %d\n", res);
return res;
}
-
+
res = mtd->write_ecc (mtd, to, len, &retlen, buf, &buf[len], &oobinfo);
if (res < 0) {
printk (KERN_WARNING "nand_bbt: Error while writing bad block table %d\n", res);
return res;
}
- printk (KERN_DEBUG "Bad block table written to 0x%08x, version 0x%02X\n",
+ printk (KERN_DEBUG "Bad block table written to 0x%08x, version 0x%02X\n",
(unsigned int) to, td->version[chip]);
-
+
/* Mark it as used */
td->pages[chip] = page;
- }
+ }
return 0;
}
* @mtd: MTD device structure
* @bd: descriptor for the good/bad block search pattern
*
- * The function creates a memory based bbt by scanning the device
+ * The function creates a memory based bbt by scanning the device
* for manufacturer / software marked good / bad blocks
*/
static int nand_memory_bbt (struct mtd_info *mtd, struct nand_bbt_descr *bd)
struct nand_bbt_descr *rd, *rd2;
/* Do we have a bbt per chip ? */
- if (td->options & NAND_BBT_PERCHIP)
+ if (td->options & NAND_BBT_PERCHIP)
chips = this->numchips;
- else
+ else
chips = 1;
-
+
for (i = 0; i < chips; i++) {
writeops = 0;
rd = NULL;
}
if (td->pages[i] == -1) {
- rd = md;
+ rd = md;
td->version[i] = md->version[i];
writeops = 1;
goto writecheck;
if (!(td->options & NAND_BBT_VERSION))
rd2 = md;
goto writecheck;
- }
+ }
if (((int8_t) (td->version[i] - md->version[i])) > 0) {
rd = td;
create:
/* Create the bad block table by scanning the device ? */
if (!(td->options & NAND_BBT_CREATE))
- continue;
-
+ continue;
+
/* Create the table in memory by scanning the chip(s) */
create_bbt (mtd, buf, bd, chipsel);
-
+
td->version[i] = 1;
if (md)
- md->version[i] = 1;
-writecheck:
+ md->version[i] = 1;
+writecheck:
/* read back first ? */
if (rd)
read_abs_bbt (mtd, buf, rd, chipsel);
if (res < 0)
return res;
}
-
+
/* Write the mirror bad block table to the device ? */
if ((writeops & 0x02) && md && (md->options & NAND_BBT_WRITE)) {
res = write_bbt (mtd, buf, md, td, chipsel);
return res;
}
}
- return 0;
+ return 0;
}
/**
- * mark_bbt_regions - [GENERIC] mark the bad block table regions
+ * mark_bbt_regions - [GENERIC] mark the bad block table regions
* @mtd: MTD device structure
* @td: bad block table descriptor
*
} else {
chips = 1;
nrblocks = (int)(mtd->size >> this->bbt_erase_shift);
- }
-
+ }
+
for (i = 0; i < chips; i++) {
if ((td->options & NAND_BBT_ABSPAGE) ||
!(td->options & NAND_BBT_WRITE)) {
if (td->pages[i] == -1) continue;
block = td->pages[i] >> (this->bbt_erase_shift - this->page_shift);
- block <<= 1;
+ block <<= 1;
oldval = this->bbt[(block >> 3)];
newval = oldval | (0x2 << (block & 0x06));
this->bbt[(block >> 3)] = newval;
update = 0;
if (td->options & NAND_BBT_LASTBLOCK)
block = ((i + 1) * nrblocks) - td->maxblocks;
- else
+ else
block = i * nrblocks;
- block <<= 1;
+ block <<= 1;
for (j = 0; j < td->maxblocks; j++) {
oldval = this->bbt[(block >> 3)];
newval = oldval | (0x2 << (block & 0x06));
this->bbt[(block >> 3)] = newval;
if (oldval != newval) update = 1;
block += 2;
- }
+ }
/* If we want reserved blocks to be recorded to flash, and some
new ones have been marked, then we need to update the stored
bbts. This should only happen once. */
* @mtd: MTD device structure
* @bd: descriptor for the good/bad block search pattern
*
- * The function checks, if a bad block table(s) is/are already
+ * The function checks, if a bad block table(s) is/are already
* available. If not it scans the device for manufacturer
* marked good / bad blocks and writes the bad block table(s) to
* the selected place.
this->bbt = NULL;
return -ENOMEM;
}
-
+
/* Is the bbt at a given page ? */
if (td->options & NAND_BBT_ABSPAGE) {
res = read_abs_bbts (mtd, buf, td, md);
- } else {
+ } else {
/* Search the bad block table using a pattern in oob */
res = search_read_bbts (mtd, buf, td, md);
- }
+ }
- if (res)
+ if (res)
res = check_create (mtd, buf, bd);
-
+
/* Prevent the bbt regions from erasing / writing */
mark_bbt_region (mtd, td);
if (md)
mark_bbt_region (mtd, md);
-
+
kfree (buf);
return res;
}
/**
- * nand_update_bbt - [NAND Interface] update bad block table(s)
+ * nand_update_bbt - [NAND Interface] update bad block table(s)
* @mtd: MTD device structure
* @offs: the offset of the newly marked block
*
printk (KERN_ERR "nand_update_bbt: Out of memory\n");
return -ENOMEM;
}
-
+
writeops = md != NULL ? 0x03 : 0x01;
/* Do we have a bbt per chip ? */
td->version[chip]++;
if (md)
- md->version[chip]++;
+ md->version[chip]++;
/* Write the bad block table to the device ? */
if ((writeops & 0x01) && (td->options & NAND_BBT_WRITE)) {
res = write_bbt (mtd, buf, md, td, chipsel);
}
-out:
+out:
kfree (buf);
return res;
}
-/* Define some generic bad / good block scan pattern which are used
+/* Define some generic bad / good block scan pattern which are used
* while scanning a device for factory marked good / bad blocks
- *
- * The memory based patterns just
+ *
+ * The memory based patterns just
*/
static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
static uint8_t mirror_pattern[] = {'1', 't', 'b', 'B' };
static struct nand_bbt_descr bbt_main_descr = {
- .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE
+ .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE
| NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP,
.offs = 8,
.len = 4,
};
static struct nand_bbt_descr bbt_mirror_descr = {
- .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE
+ .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE
| NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP,
.offs = 8,
.len = 4,
};
/**
- * nand_default_bbt - [NAND Interface] Select a default bad block table for the device
+ * nand_default_bbt - [NAND Interface] Select a default bad block table for the device
* @mtd: MTD device structure
*
* This function selects the default bad block table
int nand_default_bbt (struct mtd_info *mtd)
{
struct nand_chip *this = mtd->priv;
-
- /* Default for AG-AND. We must use a flash based
+
+ /* Default for AG-AND. We must use a flash based
* bad block table as the devices have factory marked
* _good_ blocks. Erasing those blocks leads to loss
* of the good / bad information, so we _must_ store
- * this information in a good / bad table during
+ * this information in a good / bad table during
* startup
*/
if (this->options & NAND_IS_AND) {
/* Use the default pattern descriptors */
- if (!this->bbt_td) {
+ if (!this->bbt_td) {
this->bbt_td = &bbt_main_descr;
this->bbt_md = &bbt_mirror_descr;
- }
+ }
this->options |= NAND_USE_FLASH_BBT;
return nand_scan_bbt (mtd, &agand_flashbased);
}
-
-
+
+
/* Is a flash based bad block table requested ? */
if (this->options & NAND_USE_FLASH_BBT) {
- /* Use the default pattern descriptors */
- if (!this->bbt_td) {
+ /* Use the default pattern descriptors */
+ if (!this->bbt_td) {
this->bbt_td = &bbt_main_descr;
this->bbt_md = &bbt_mirror_descr;
}
}
/**
- * nand_isbad_bbt - [NAND Interface] Check if a block is bad
+ * nand_isbad_bbt - [NAND Interface] Check if a block is bad
* @mtd: MTD device structure
* @offs: offset in the device
* @allowbbt: allow access to bad block table region
*
-*/
+ */
int nand_isbad_bbt (struct mtd_info *mtd, loff_t offs, int allowbbt)
{
struct nand_chip *this = mtd->priv;
int block;
uint8_t res;
-
+
/* Get block number * 2 */
block = (int) (offs >> (this->bbt_erase_shift - 1));
res = (this->bbt[block >> 3] >> (block & 0x06)) & 0x03;
- DEBUG (MTD_DEBUG_LEVEL2, "nand_isbad_bbt(): bbt info for offs 0x%08x: (block %d) 0x%02x\n",
+ DEBUG (MTD_DEBUG_LEVEL2, "nand_isbad_bbt(): bbt info for offs 0x%08x: (block %d) 0x%02x\n",
(unsigned int)offs, res, block >> 1);
switch ((int)res) {
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 or (at your option) any
* later version.
- *
+ *
* This file is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
- *
+ *
* You should have received a copy of the GNU General Public License along
* with this file; if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
- *
+ *
* As a special exception, if other files instantiate templates or use
* macros or inline functions from these files, or you compile these
* files and link them with other works to produce a work based on these
* covered by the GNU General Public License. However the source code for
* these files must still be made available in accordance with section (3)
* of the GNU General Public License.
- *
+ *
* This exception does not invalidate any other reasons why a work based on
* this file might be covered by the GNU General Public License.
*/
* nand_trans_result - [GENERIC] create non-inverted ECC
* @reg2: line parity reg 2
* @reg3: line parity reg 3
- * @ecc_code: ecc
+ * @ecc_code: ecc
*
* Creates non-inverted ECC code from line parity
*/
u_char *ecc_code)
{
u_char a, b, i, tmp1, tmp2;
-
+
/* Initialize variables */
a = b = 0x80;
tmp1 = tmp2 = 0;
-
+
/* Calculate first ECC byte */
for (i = 0; i < 4; i++) {
if (reg3 & a) /* LP15,13,11,9 --> ecc_code[0] */
b >>= 1;
a >>= 1;
}
-
+
/* Calculate second ECC byte */
b = 0x80;
for (i = 0; i < 4; i++) {
b >>= 1;
a >>= 1;
}
-
+
/* Store two of the ECC bytes */
ecc_code[0] = tmp1;
ecc_code[1] = tmp2;
{
u_char idx, reg1, reg2, reg3;
int j;
-
+
/* Initialize variables */
reg1 = reg2 = reg3 = 0;
ecc_code[0] = ecc_code[1] = ecc_code[2] = 0;
-
- /* Build up column parity */
+
+ /* Build up column parity */
for(j = 0; j < 256; j++) {
-
+
/* Get CP0 - CP5 from table */
idx = nand_ecc_precalc_table[dat[j]];
reg1 ^= (idx & 0x3f);
-
+
/* All bit XOR = 1 ? */
if (idx & 0x40) {
reg3 ^= (u_char) j;
reg2 ^= ~((u_char) j);
}
}
-
+
/* Create non-inverted ECC code from line parity */
nand_trans_result(reg2, reg3, ecc_code);
-
+
/* Calculate final ECC code */
ecc_code[0] = ~ecc_code[0];
ecc_code[1] = ~ecc_code[1];
int nand_correct_data(struct mtd_info *mtd, u_char *dat, u_char *read_ecc, u_char *calc_ecc)
{
u_char a, b, c, d1, d2, d3, add, bit, i;
-
- /* Do error detection */
+
+ /* Do error detection */
d1 = calc_ecc[0] ^ read_ecc[0];
d2 = calc_ecc[1] ^ read_ecc[1];
d3 = calc_ecc[2] ^ read_ecc[2];
-
+
if ((d1 | d2 | d3) == 0) {
/* No errors */
return 0;
a = (d1 ^ (d1 >> 1)) & 0x55;
b = (d2 ^ (d2 >> 1)) & 0x55;
c = (d3 ^ (d3 >> 1)) & 0x54;
-
+
/* Found and will correct single bit error in the data */
if ((a == 0x55) && (b == 0x55) && (c == 0x54)) {
c = 0x80;
a ^= (b << bit);
dat[add] = a;
return 1;
- }
- else {
+ } else {
i = 0;
while (d1) {
if (d1 & 0x01)
}
}
}
-
+
/* Should never happen */
return -1;
}
/*
* Chip ID list
-*
+*
* Name. ID code, pagesize, chipsize in MegaByte, eraseblock size,
* options
-*
+*
* Pagesize; 0, 256, 512
* 0 get this information from the extended chip ID
+ 256 256 Byte page size
-* 512 512 Byte page size
+* 512 512 Byte page size
*/
struct nand_flash_dev nand_flash_ids[] = {
{"NAND 1MiB 5V 8-bit", 0x6e, 256, 1, 0x1000, 0},
{"NAND 4MiB 3,3V 8-bit", 0xe3, 512, 4, 0x2000, 0},
{"NAND 4MiB 3,3V 8-bit", 0xe5, 512, 4, 0x2000, 0},
{"NAND 8MiB 3,3V 8-bit", 0xd6, 512, 8, 0x2000, 0},
-
+
{"NAND 8MiB 1,8V 8-bit", 0x39, 512, 8, 0x2000, 0},
{"NAND 8MiB 3,3V 8-bit", 0xe6, 512, 8, 0x2000, 0},
{"NAND 8MiB 1,8V 16-bit", 0x49, 512, 8, 0x2000, NAND_BUSWIDTH_16},
{"NAND 8MiB 3,3V 16-bit", 0x59, 512, 8, 0x2000, NAND_BUSWIDTH_16},
-
+
{"NAND 16MiB 1,8V 8-bit", 0x33, 512, 16, 0x4000, 0},
{"NAND 16MiB 3,3V 8-bit", 0x73, 512, 16, 0x4000, 0},
{"NAND 16MiB 1,8V 16-bit", 0x43, 512, 16, 0x4000, NAND_BUSWIDTH_16},
{"NAND 16MiB 3,3V 16-bit", 0x53, 512, 16, 0x4000, NAND_BUSWIDTH_16},
-
+
{"NAND 32MiB 1,8V 8-bit", 0x35, 512, 32, 0x4000, 0},
{"NAND 32MiB 3,3V 8-bit", 0x75, 512, 32, 0x4000, 0},
{"NAND 32MiB 1,8V 16-bit", 0x45, 512, 32, 0x4000, NAND_BUSWIDTH_16},
{"NAND 32MiB 3,3V 16-bit", 0x55, 512, 32, 0x4000, NAND_BUSWIDTH_16},
-
+
{"NAND 64MiB 1,8V 8-bit", 0x36, 512, 64, 0x4000, 0},
{"NAND 64MiB 3,3V 8-bit", 0x76, 512, 64, 0x4000, 0},
{"NAND 64MiB 1,8V 16-bit", 0x46, 512, 64, 0x4000, NAND_BUSWIDTH_16},
{"NAND 64MiB 3,3V 16-bit", 0x56, 512, 64, 0x4000, NAND_BUSWIDTH_16},
-
+
{"NAND 128MiB 1,8V 8-bit", 0x78, 512, 128, 0x4000, 0},
{"NAND 128MiB 3,3V 8-bit", 0x79, 512, 128, 0x4000, 0},
{"NAND 128MiB 1,8V 16-bit", 0x72, 512, 128, 0x4000, NAND_BUSWIDTH_16},
{"NAND 128MiB 3,3V 16-bit", 0x74, 512, 128, 0x4000, NAND_BUSWIDTH_16},
-
+
{"NAND 256MiB 3,3V 8-bit", 0x71, 512, 256, 0x4000, 0},
{"NAND 512MiB 3,3V 8-bit", 0xDC, 512, 512, 0x4000, 0},
-
+
/* These are the new chips with large page size. The pagesize
* and the erasesize is determined from the extended id bytes
*/
{"NAND 256MiB 3,3V 8-bit", 0xDA, 0, 256, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR},
{"NAND 256MiB 1,8V 16-bit", 0xBA, 0, 256, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR},
{"NAND 256MiB 3,3V 16-bit", 0xCA, 0, 256, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR},
-
+
/* 4 Gigabit */
{"NAND 512MiB 1,8V 8-bit", 0xAC, 0, 512, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR},
{"NAND 512MiB 3,3V 8-bit", 0xDC, 0, 512, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR},
{"NAND 512MiB 1,8V 16-bit", 0xBC, 0, 512, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR},
{"NAND 512MiB 3,3V 16-bit", 0xCC, 0, 512, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR},
-
+
/* 8 Gigabit */
{"NAND 1GiB 1,8V 8-bit", 0xA3, 0, 1024, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR},
{"NAND 1GiB 3,3V 8-bit", 0xD3, 0, 1024, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR},
{"NAND 2GiB 1,8V 16-bit", 0xB5, 0, 2048, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR},
{"NAND 2GiB 3,3V 16-bit", 0xC5, 0, 2048, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR},
- /* Renesas AND 1 Gigabit. Those chips do not support extended id and have a strange page/block layout !
+ /* Renesas AND 1 Gigabit. Those chips do not support extended id and have a strange page/block layout !
* The chosen minimum erasesize is 4 * 2 * 2048 = 16384 Byte, as those chips have an array of 4 page planes
* 1 block = 2 pages, but due to plane arrangement the blocks 0-3 consists of page 0 + 4,1 + 5, 2 + 6, 3 + 7
* Anyway JFFS2 would increase the eraseblock size so we chose a combined one which can be erased in one go
- * There are more speed improvements for reads and writes possible, but not implemented now
+ * There are more speed improvements for reads and writes possible, but not implemented now
*/
{"AND 128MiB 3,3V 8-bit", 0x01, 2048, 128, 0x4000, NAND_IS_AND | NAND_NO_AUTOINCR | NAND_4PAGE_ARRAY},
/* keeps pointer to currentlu processed partition */
static struct part_info *current_part;
-#if defined(CONFIG_JFFS2_NAND) && (CONFIG_COMMANDS & CFG_CMD_NAND)
+#if defined(CONFIG_JFFS2_NAND) && (CONFIG_COMMANDS & CFG_CMD_NAND) && !defined(CONFIG_NEW_NAND_CODE)
/*
* Support for jffs2 on top of NAND-flash
*
return get_fl_mem_nor(off);
#endif
-#if defined(CONFIG_JFFS2_NAND) && (CONFIG_COMMANDS & CFG_CMD_NAND)
+#if defined(CONFIG_JFFS2_NAND) && (CONFIG_COMMANDS & CFG_CMD_NAND) && !defined(CONFIG_NEW_NAND_CODE)
if (id->type == MTD_DEV_TYPE_NAND)
return get_fl_mem_nand(off, size, ext_buf);
#endif
return get_node_mem_nor(off);
#endif
-#if defined(CONFIG_JFFS2_NAND) && (CONFIG_COMMANDS & CFG_CMD_NAND)
+#if defined(CONFIG_JFFS2_NAND) && (CONFIG_COMMANDS & CFG_CMD_NAND) && !defined(CONFIG_NEW_NAND_CODE)
if (id->type == MTD_DEV_TYPE_NAND)
return get_node_mem_nand(off);
#endif
static inline void put_fl_mem(void *buf)
{
-#if defined(CONFIG_JFFS2_NAND) && (CONFIG_COMMANDS & CFG_CMD_NAND)
+#if defined(CONFIG_JFFS2_NAND) && (CONFIG_COMMANDS & CFG_CMD_NAND) && !defined(CONFIG_NEW_NAND_CODE)
struct mtdids *id = current_part->dev->id;
if (id->type == MTD_DEV_TYPE_NAND)
#include <common.h>
-#if (CONFIG_COMMANDS & CFG_CMD_JFFS2)
+#if defined(CONFIG_NEW_NAND_CODE) && (CONFIG_COMMANDS & CFG_CMD_JFFS2)
#include <malloc.h>
#include <linux/stat.h>
#include "jffs2_nand_private.h"
-#define NODE_CHUNK 1024 /* size of memory allocation chunk in b_nodes */
+#define NODE_CHUNK 1024 /* size of memory allocation chunk in b_nodes */
/* Debugging switches */
#undef DEBUG_DIRENTS /* print directory entry list after scan */
#undef DEBUG_FRAGMENTS /* print fragment list after scan */
-#undef DEBUG /* enable debugging messages */
+#undef DEBUG /* enable debugging messages */
#ifdef DEBUG
# define DEBUGF(fmt,args...) printf(fmt ,##args)
# define DEBUGF(fmt,args...)
#endif
-static int nanddev = -1; /* nand device of current partition */
static nand_info_t *nand;
/* Compression names */
continue;
if (jDir->version == version && inode != 0) {
- /* I'm pretty sure this isn't legal */
+ /* I'm pretty sure this isn't legal */
putstr(" ** ERROR ** ");
-// putnstr(jDir->name, jDir->nsize);
-// putLabeledWord(" has dup version =", version);
+/* putnstr(jDir->name, jDir->nsize); */
+/* putLabeledWord(" has dup version =", version); */
}
inode = jDir->ino;
version = jDir->version;
/* we need to search all and return the inode with the highest version */
for (jDir = (struct b_dirent *)pL->dir.listHead; jDir; jDir = jDir->next) {
if (ino == jDir->ino) {
- if (jDir->version < version)
+ if (jDir->version < version)
continue;
if (jDir->version == version && jDirFoundType) {
- /* I'm pretty sure this isn't legal */
+ /* I'm pretty sure this isn't legal */
putstr(" ** ERROR ** ");
-// putnstr(jDir->name, jDir->nsize);
-// putLabeledWord(" has dup version (resolve) = ",
-// version);
+/* putnstr(jDir->name, jDir->nsize); */
+/* putLabeledWord(" has dup version (resolve) = ", */
+/* version); */
}
jDirFoundType = jDir->type;
return 1;
}
-#if defined(CONFIG_JFFS2_NAND) && (CONFIG_COMMANDS & CFG_CMD_NAND)
- if (nanddev != (int)part->usr_priv - 1) {
- DEBUGF ("rescan: nand device changed\n");
- return -1;
- }
-#endif /* defined(CONFIG_JFFS2_NAND) && (CONFIG_COMMANDS & CFG_CMD_NAND) */
/* FIXME */
#if 0
/* but suppose someone reflashed a partition at the same offset... */
u32 counterF = 0;
u32 counterN = 0;
-#if defined(CONFIG_JFFS2_NAND) && (CONFIG_COMMANDS & CFG_CMD_NAND)
- nanddev = (int)part->usr_priv - 1;
- nand = &nand_info[nanddev];
-#endif /* defined(CONFIG_JFFS2_NAND) && (CONFIG_COMMANDS & CFG_CMD_NAND) */
+ struct mtdids *id = part->dev->id;
+ nand = nand_info + id->num;
/* if we are building a list we need to refresh the cache. */
jffs_init_1pass_list(part);
long ret = 0;
u32 inode;
- if (! (pl = jffs2_get_list(part, "load")))
+ if (! (pl = jffs2_get_list(part, "load")))
return 0;
if (! (inode = jffs2_1pass_search_inode(pl, fname, 1))) {
struct b_lists *pl;
int i;
- if (! (pl = jffs2_get_list(part, "info")))
+ if (! (pl = jffs2_get_list(part, "info")))
return 0;
jffs2_1pass_fill_info(pl, &info);
#define __raw_readw(a) __arch_getw(a)
#define __raw_readl(a) __arch_getl(a)
+#define writeb(v,a) __arch_putb(v,a)
+#define writew(v,a) __arch_putw(v,a)
+#define writel(v,a) __arch_putl(v,a)
+
+#define readb(a) __arch_getb(a)
+#define readw(a) __arch_getw(a)
+#define readl(a) __arch_getl(a)
+
/*
* The compiler seems to be incapable of optimising constants
* properly. Spell it out to the compiler in some cases.
--- /dev/null
+/*
+ * (C) Copyright 2005 2N TELEKOMUNIKACE, Ladislav Michl
+ *
+ * Configuation settings for the TI OMAP NetStar board.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include <configs/omap1510.h>
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+#define CONFIG_ARM925T 1 /* This is an arm925t CPU */
+#define CONFIG_OMAP 1 /* in a TI OMAP core */
+#define CONFIG_OMAP1510 1 /* which is in a 5910 */
+
+/* Input clock of PLL */
+#define CONFIG_SYS_CLK_FREQ 150000000 /* 150MHz input clock */
+#define CONFIG_XTAL_FREQ 12000000
+
+#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
+
+#define CONFIG_MISC_INIT_R /* There is nothing to really init */
+#define BOARD_LATE_INIT /* but we flash the LEDs here */
+
+#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
+#define CONFIG_SETUP_MEMORY_TAGS 1
+#define CONFIG_INITRD_TAG 1
+
+#define CFG_DEVICE_NULLDEV 1 /* enable null device */
+#define CONFIG_SILENT_CONSOLE 1 /* enable silent startup */
+
+/*
+ * Physical Memory Map
+ */
+#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
+#define PHYS_SDRAM_1 0x10000000 /* SDRAM Bank #1 */
+#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */
+
+/*
+ * FLASH organization
+ */
+#define CFG_FLASH_BASE PHYS_FLASH_1
+#define CFG_MAX_FLASH_BANKS 1
+#if (PHYS_SDRAM_1_SIZE == SZ_32M)
+/*#if 1*/
+#define CFG_FLASH_CFI /* Flash is CFI conformant */
+#define CFG_FLASH_CFI_DRIVER /* Use the common driver */
+#define CFG_FLASH_EMPTY_INFO
+#define CFG_MAX_FLASH_SECT 128
+#else
+#define PHYS_FLASH_1_SIZE SZ_1M
+#define CFG_MAX_FLASH_SECT 19
+#define CFG_FLASH_ERASE_TOUT (5*CFG_HZ) /* in ticks */
+#define CFG_FLASH_WRITE_TOUT (5*CFG_HZ)
+#endif
+
+#define CFG_MONITOR_BASE PHYS_FLASH_1
+#define CFG_MONITOR_LEN SZ_256K
+
+/*
+ * Environment settings
+ */
+#define CFG_ENV_IS_IN_FLASH
+#define ENV_IS_SOLITARY
+#define CFG_ENV_ADDR 0x4000
+#define CFG_ENV_SIZE SZ_8K
+#define CFG_ENV_SECT_SIZE SZ_8K
+#define CFG_ENV_ADDR_REDUND 0x6000
+#define CFG_ENV_SIZE_REDUND CFG_ENV_SIZE
+#define CONFIG_ENV_OVERWRITE
+
+/*
+ * Size of malloc() pool
+ */
+#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
+/* XXX #define CFG_MALLOC_LEN (SZ_64K - CFG_GBL_DATA_SIZE)*/
+#define CFG_MALLOC_LEN SZ_4M
+
+/*
+ * The stack size is set up in start.S using the settings below
+ */
+/* XXX #define CONFIG_STACKSIZE SZ_8K /XXX* regular stack */
+#define CONFIG_STACKSIZE SZ_1M /* regular stack */
+
+/*
+ * Hardware drivers
+ */
+#define CONFIG_DRIVER_SMC91111
+#define CONFIG_SMC91111_BASE 0x04000300
+
+/*
+ * NS16550 Configuration
+ */
+#define CFG_NS16550
+#define CFG_NS16550_SERIAL
+#define CFG_NS16550_REG_SIZE (-4)
+#define CFG_NS16550_CLK (CONFIG_XTAL_FREQ) /* can be 12M/32Khz or 48Mhz */
+#define CFG_NS16550_COM1 OMAP1510_UART1_BASE /* uart1 */
+
+#define CONFIG_CONS_INDEX 1
+#define CONFIG_BAUDRATE 115200
+#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+
+/*#define CONFIG_SKIP_RELOCATE_UBOOT*/
+/*#define CONFIG_SKIP_LOWLEVEL_INIT */
+
+/*
+ * NAND flash
+ */
+#define CFG_MAX_NAND_DEVICE 1
+#define CFG_NAND_BASE 0x04000000 + (2 << 23)
+#define CONFIG_NEW_NAND_CODE
+
+/*
+ * JFFS2 partitions (mtdparts command line support)
+ */
+#define CONFIG_JFFS2_CMDLINE
+#define MTDIDS_DEFAULT "nor0=omapflash.0,nand0=omapnand.0"
+#define MTDPARTS_DEFAULT "mtdparts=omapflash.0:8k@16k(env),8k(r_env),448k@576k(u-boot);omapnand.0:48M(rootfs0),48M(rootfs1),-(data)"
+
+#if 0
+#define CONFIG_COMMANDS (CFG_CMD_BDI | \
+ CFG_CMD_BOOTD | \
+ CFG_CMD_DHCP | \
+ CFG_CMD_ENV | \
+ CFG_CMD_FLASH | \
+ CFG_CMD_IMI | \
+ CFG_CMD_LOADB | \
+ CFG_CMD_NET | \
+ CFG_CMD_MEMORY | \
+ CFG_CMD_PING | \
+ CFG_CMD_RUN)
+
+#else
+#define CONFIG_COMMANDS (CFG_CMD_BDI | \
+ CFG_CMD_BOOTD | \
+ CFG_CMD_DHCP | \
+ CFG_CMD_ENV | \
+ CFG_CMD_FLASH | \
+ CFG_CMD_NAND | \
+ CFG_CMD_IMI | \
+ CFG_CMD_JFFS2 | \
+ CFG_CMD_LOADB | \
+ CFG_CMD_NET | \
+ CFG_CMD_MEMORY | \
+ CFG_CMD_PING | \
+ CFG_CMD_RUN)
+
+#define CONFIG_JFFS2_NAND 1 /* jffs2 on nand support */
+#endif
+
+#define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT
+#define CONFIG_LOOPW
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+#define CONFIG_BOOTDELAY 3
+#define CONFIG_ZERO_BOOTDELAY_CHECK /* allow to break in always */
+#undef CONFIG_BOOTARGS /* the boot command will set bootargs*/
+#define CFG_AUTOLOAD "n" /* No autoload */
+#define CONFIG_BOOTCOMMAND "run nboot"
+#define CONFIG_PREBOOT "run setup"
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "setup=setenv bootargs console=ttyS0,$baudrate " \
+ "$mtdparts\0" \
+ "ospart=0\0" \
+ "setpart=" \
+ "if test -n $swapos; then " \
+ "if test $ospart -eq 0; then chpart nand0,1; else chpart nand0,0; fi; "\
+ "setenv swapos; saveenv; " \
+ "else " \
+ "chpart nand0,$ospart; " \
+ "fi\0" \
+ "nfsargs=setenv bootargs $bootargs " \
+ "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname::off " \
+ "nfsroot=$rootpath root=/dev/nfs\0" \
+ "flashargs=run setpart;setenv bootargs $bootargs " \
+ "root=/dev/mtdblock$partition ro " \
+ "rootfstype=jffs2\0" \
+ "initrdargs=setenv bootargs $bootargs " \
+ "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname::off\0" \
+ "iboot=bootp;run initrdargs;tftp;bootm\0" \
+ "fboot=run flashargs;fsload /boot/uImage;bootm\0" \
+ "nboot=bootp;run nfsargs;tftp;bootm\0"
+
+#if 0 /* feel free to disable for development */
+#define CONFIG_AUTOBOOT_KEYED /* Enable password protection */
+#define CONFIG_AUTOBOOT_PROMPT "\nNetStar PBX - boot in %d sec...\n"
+#define CONFIG_AUTOBOOT_DELAY_STR "R" /* 1st "password" */
+#define CONFIG_BOOT_RETRY_TIME 30
+#endif
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "# " /* Monitor Command Prompt */
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+
+#define CFG_HUSH_PARSER
+#define CFG_PROMPT_HUSH_PS2 "> "
+#define CONFIG_AUTO_COMPLETE
+
+#define CFG_MEMTEST_START PHYS_SDRAM_1
+#define CFG_MEMTEST_END PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE
+
+#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */
+
+#define CFG_LOAD_ADDR PHYS_SDRAM_1 + 0x400000 /* default load address */
+
+/* The 1510 has 3 timers, they can be driven by the RefClk (12Mhz) or by DPLL1.
+ * This time is further subdivided by a local divisor.
+ */
+#define CFG_TIMERBASE OMAP1510_TIMER1_BASE
+#define CFG_PVT 7 /* 2^(pvt+1), divide by 256 */
+#define CFG_HZ ((CONFIG_SYS_CLK_FREQ)/(2 << CFG_PVT))
+
+#define OMAP5910_DPLL_DIV 1
+#define OMAP5910_DPLL_MUL ((CONFIG_SYS_CLK_FREQ * \
+ (1 << OMAP5910_DPLL_DIV)) / CONFIG_XTAL_FREQ)
+
+#define OMAP5910_ARM_PER_DIV 2 /* CKL/4 */
+#define OMAP5910_LCD_DIV 2 /* CKL/4 */
+#define OMAP5910_ARM_DIV 0 /* CKL/1 */
+#define OMAP5910_DSP_DIV 0 /* CKL/1 */
+#define OMAP5910_TC_DIV 1 /* CKL/2 */
+#define OMAP5910_DSP_MMU_DIV 1 /* CKL/2 */
+#define OMAP5910_ARM_TIM_SEL 1 /* CKL used for MPU timers */
+
+#define OMAP5910_ARM_EN_CLK 0x03d6 /* 0000 0011 1101 0110b Clock Enable */
+#define OMAP5910_ARM_CKCTL ((OMAP5910_ARM_PER_DIV) | \
+ (OMAP5910_LCD_DIV << 2) | \
+ (OMAP5910_ARM_DIV << 4) | \
+ (OMAP5910_DSP_DIV << 6) | \
+ (OMAP5910_TC_DIV << 8) | \
+ (OMAP5910_DSP_MMU_DIV << 10) | \
+ (OMAP5910_ARM_TIM_SEL << 12))
+
+#endif /* __CONFIG_H */
/*
* $Id: mtd-abi.h,v 1.7 2004/11/23 15:37:32 gleixner Exp $
*
- * Portions of MTD ABI definition which are shared by kernel and user space
+ * Portions of MTD ABI definition which are shared by kernel and user space
*/
#ifndef __MTD_ABI_H__
#define MTD_OTHER 14
#define MTD_UNKNOWN 15
-#define MTD_CLEAR_BITS 1 // Bits can be cleared (flash)
-#define MTD_SET_BITS 2 // Bits can be set
-#define MTD_ERASEABLE 4 // Has an erase function
-#define MTD_WRITEB_WRITEABLE 8 // Direct IO is possible
-#define MTD_VOLATILE 16 // Set for RAMs
-#define MTD_XIP 32 // eXecute-In-Place possible
-#define MTD_OOB 64 // Out-of-band data (NAND flash)
-#define MTD_ECC 128 // Device capable of automatic ECC
-#define MTD_NO_VIRTBLOCKS 256 // Virtual blocks not allowed
+#define MTD_CLEAR_BITS 1 /* Bits can be cleared (flash) */
+#define MTD_SET_BITS 2 /* Bits can be set */
+#define MTD_ERASEABLE 4 /* Has an erase function */
+#define MTD_WRITEB_WRITEABLE 8 /* Direct IO is possible */
+#define MTD_VOLATILE 16 /* Set for RAMs */
+#define MTD_XIP 32 /* eXecute-In-Place possible */
+#define MTD_OOB 64 /* Out-of-band data (NAND flash) */
+#define MTD_ECC 128 /* Device capable of automatic ECC */
+#define MTD_NO_VIRTBLOCKS 256 /* Virtual blocks not allowed */
-// Some common devices / combinations of capabilities
+/* Some common devices / combinations of capabilities */
#define MTD_CAP_ROM 0
#define MTD_CAP_RAM (MTD_CLEAR_BITS|MTD_SET_BITS|MTD_WRITEB_WRITEABLE)
#define MTD_CAP_NORFLASH (MTD_CLEAR_BITS|MTD_ERASEABLE)
#define MTD_WRITEABLE (MTD_CLEAR_BITS|MTD_SET_BITS)
-// Types of automatic ECC/Checksum available
-#define MTD_ECC_NONE 0 // No automatic ECC available
-#define MTD_ECC_RS_DiskOnChip 1 // Automatic ECC on DiskOnChip
-#define MTD_ECC_SW 2 // SW ECC for Toshiba & Samsung devices
+/* Types of automatic ECC/Checksum available */
+#define MTD_ECC_NONE 0 /* No automatic ECC available */
+#define MTD_ECC_RS_DiskOnChip 1 /* Automatic ECC on DiskOnChip */
+#define MTD_ECC_SW 2 /* SW ECC for Toshiba & Samsung devices */
/* ECC byte placement */
-#define MTD_NANDECC_OFF 0 // Switch off ECC (Not recommended)
-#define MTD_NANDECC_PLACE 1 // Use the given placement in the structure (YAFFS1 legacy mode)
-#define MTD_NANDECC_AUTOPLACE 2 // Use the default placement scheme
-#define MTD_NANDECC_PLACEONLY 3 // Use the given placement in the structure (Do not store ecc result on read)
-#define MTD_NANDECC_AUTOPL_USR 4 // Use the given autoplacement scheme rather than using the default
+#define MTD_NANDECC_OFF 0 /* Switch off ECC (Not recommended) */
+#define MTD_NANDECC_PLACE 1 /* Use the given placement in the structure (YAFFS1 legacy mode) */
+#define MTD_NANDECC_AUTOPLACE 2 /* Use the default placement scheme */
+#define MTD_NANDECC_PLACEONLY 3 /* Use the given placement in the structure (Do not store ecc result on read) */
+#define MTD_NANDECC_AUTOPL_USR 4 /* Use the given autoplacement scheme rather than using the default */
struct mtd_info_user {
uint8_t type;
uint32_t flags;
- uint32_t size; // Total size of the MTD
+ uint32_t size; /* Total size of the MTD */
uint32_t erasesize;
- uint32_t oobblock; // Size of OOB blocks (e.g. 512)
- uint32_t oobsize; // Amount of OOB data per block (e.g. 16)
+ uint32_t oobblock; /* Size of OOB blocks (e.g. 512) */
+ uint32_t oobsize; /* Amount of OOB data per block (e.g. 16) */
uint32_t ecctype;
uint32_t eccsize;
};
struct region_info_user {
- uint32_t offset; /* At which this region starts,
+ uint32_t offset; /* At which this region starts,
* from the beginning of the MTD */
uint32_t erasesize; /* For this region */
uint32_t numblocks; /* Number of blocks in this region */
-/*
+/*
* $Id: mtd.h,v 1.56 2004/08/09 18:46:04 dmarlin Exp $
*
* Copyright (C) 1999-2003 David Woodhouse <dwmw2@infradead.org> et al.
struct mtd_info {
u_char type;
u_int32_t flags;
- u_int32_t size; // Total size of the MTD
+ u_int32_t size; /* Total size of the MTD */
/* "Major" erase size for the device. Naïve users may take this
* to be the only erase size available, or may use the more detailed
*/
u_int32_t erasesize;
- u_int32_t oobblock; // Size of OOB blocks (e.g. 512)
- u_int32_t oobsize; // Amount of OOB data per block (e.g. 16)
- u_int32_t oobavail; // Number of bytes in OOB area available for fs
+ u_int32_t oobblock; /* Size of OOB blocks (e.g. 512) */
+ u_int32_t oobsize; /* Amount of OOB data per block (e.g. 16) */
+ u_int32_t oobavail; /* Number of bytes in OOB area available for fs */
u_int32_t ecctype;
u_int32_t eccsize;
-
- // Kernel-only stuff starts here.
+
+ /* Kernel-only stuff starts here. */
char *name;
int index;
- // oobinfo is a nand_oobinfo structure, which can be set by iotcl (MEMSETOOBINFO)
+ /* oobinfo is a nand_oobinfo structure, which can be set by iotcl (MEMSETOOBINFO) */
struct nand_oobinfo oobinfo;
/* Data for variable erase regions. If numeraseregions is zero,
- * it means that the whole device has erasesize as given above.
+ * it means that the whole device has erasesize as given above.
*/
int numeraseregions;
- struct mtd_erase_region_info *eraseregions;
+ struct mtd_erase_region_info *eraseregions;
/* This really shouldn't be here. It can go away in 2.5 */
u_int32_t bank_size;
int (*read_oob) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf);
int (*write_oob) (struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf);
- /*
- * Methods to access the protection register area, present in some
+ /*
+ * Methods to access the protection register area, present in some
* flash devices. The user data is one time programmable but the
- * factory data is read only.
+ * factory data is read only.
*/
int (*read_user_prot_reg) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf);
#if 0
/* kvec-based read/write methods. We need these especially for NAND flash,
with its limited number of write cycles per erase.
- NB: The 'count' parameter is the number of _vectors_, each of
+ NB: The 'count' parameter is the number of _vectors_, each of
which contains an (ofs, len) tuple.
*/
int (*readv) (struct mtd_info *mtd, struct kvec *vecs, unsigned long count, loff_t from, size_t *retlen);
- int (*readv_ecc) (struct mtd_info *mtd, struct kvec *vecs, unsigned long count, loff_t from,
+ int (*readv_ecc) (struct mtd_info *mtd, struct kvec *vecs, unsigned long count, loff_t from,
size_t *retlen, u_char *eccbuf, struct nand_oobinfo *oobsel);
int (*writev) (struct mtd_info *mtd, const struct kvec *vecs, unsigned long count, loff_t to, size_t *retlen);
- int (*writev_ecc) (struct mtd_info *mtd, const struct kvec *vecs, unsigned long count, loff_t to,
+ int (*writev_ecc) (struct mtd_info *mtd, const struct kvec *vecs, unsigned long count, loff_t to,
size_t *retlen, u_char *eccbuf, struct nand_oobinfo *oobsel);
#endif
/* Sync */
#define MTD_WRITEECC(mtd, args...) (*(mtd->write_ecc))(mtd, args)
#define MTD_READOOB(mtd, args...) (*(mtd->read_oob))(mtd, args)
#define MTD_WRITEOOB(mtd, args...) (*(mtd->write_oob))(mtd, args)
-#define MTD_SYNC(mtd) do { if (mtd->sync) (*(mtd->sync))(mtd); } while (0)
+#define MTD_SYNC(mtd) do { if (mtd->sync) (*(mtd->sync))(mtd); } while (0)
#ifdef CONFIG_MTD_PARTITIONS
* bat later if I did something naughty.
* 10-11-2000 SJH Added private NAND flash structure for driver
* 10-24-2000 SJH Added prototype for 'nand_scan' function
- * 10-29-2001 TG changed nand_chip structure to support
+ * 10-29-2001 TG changed nand_chip structure to support
* hardwarespecific function for accessing control lines
* 02-21-2002 TG added support for different read/write adress and
* ready/busy line access function
* CONFIG_MTD_NAND_ECC_JFFS2 is not set
* 08-10-2002 TG extensions to nand_chip structure to support HW-ECC
*
- * 08-29-2002 tglx nand_chip structure: data_poi for selecting
+ * 08-29-2002 tglx nand_chip structure: data_poi for selecting
* internal / fs-driver buffer
* support for 6byte/512byte hardware ECC
* read_ecc, write_ecc extended for different oob-layout
* oob layout selections: NAND_NONE_OOB, NAND_JFFS2_OOB,
* NAND_YAFFS_OOB
* 11-25-2002 tglx Added Manufacturer code FUJITSU, NATIONAL
- * Split manufacturer and device ID structures
+ * Split manufacturer and device ID structures
*
* 02-08-2004 tglx added option field to nand structure for chip anomalities
* 05-25-2004 tglx added bad block table support, ST-MICRO manufacturer id
#define NAND_STATUS_READY 0x40
#define NAND_STATUS_WP 0x80
-/*
+/*
* Constants for ECC_MODES
*/
#define NAND_CACHEPRG 0x00000008
/* Chip has copy back function */
#define NAND_COPYBACK 0x00000010
-/* AND Chip which has 4 banks and a confusing page / block
+/* AND Chip which has 4 banks and a confusing page / block
* assignment. See Renesas datasheet for further information */
#define NAND_IS_AND 0x00000020
/* Chip has a array of 4 pages which can be read without
* additional ready /busy waits */
-#define NAND_4PAGE_ARRAY 0x00000040
+#define NAND_4PAGE_ARRAY 0x00000040
/* Options valid for Samsung large page devices */
#define NAND_SAMSUNG_LP_OPTIONS \
/* Use a flash based bad block table. This option is passed to the
* default bad block table function. */
#define NAND_USE_FLASH_BBT 0x00010000
-/* The hw ecc generator provides a syndrome instead a ecc value on read
- * This can only work if we have the ecc bytes directly behind the
+/* The hw ecc generator provides a syndrome instead a ecc value on read
+ * This can only work if we have the ecc bytes directly behind the
* data bytes. Applies for DOC and AG-AND Renesas HW Reed Solomon generators */
#define NAND_HWECC_SYNDROME 0x00020000
#if 0
/**
* struct nand_hw_control - Control structure for hardware controller (e.g ECC generator) shared among independend devices
- * @lock: protection lock
+ * @lock: protection lock
* @active: the mtd device which holds the controller currently
*/
struct nand_hw_control {
/**
* struct nand_chip - NAND Private Flash Chip Data
- * @IO_ADDR_R: [BOARDSPECIFIC] address to read the 8 I/O lines of the flash device
- * @IO_ADDR_W: [BOARDSPECIFIC] address to write the 8 I/O lines of the flash device
+ * @IO_ADDR_R: [BOARDSPECIFIC] address to read the 8 I/O lines of the flash device
+ * @IO_ADDR_W: [BOARDSPECIFIC] address to write the 8 I/O lines of the flash device
* @read_byte: [REPLACEABLE] read one byte from the chip
* @write_byte: [REPLACEABLE] write one byte to the chip
* @read_word: [REPLACEABLE] read one word from the chip
* be provided if a hardware ECC is available
* @erase_cmd: [INTERN] erase command write function, selectable due to AND support
* @scan_bbt: [REPLACEABLE] function to scan bad block table
- * @eccmode: [BOARDSPECIFIC] mode of ecc, see defines
+ * @eccmode: [BOARDSPECIFIC] mode of ecc, see defines
* @eccsize: [INTERN] databytes used per ecc-calculation
* @eccbytes: [INTERN] number of ecc bytes per ecc-calculation step
* @eccsteps: [INTERN] number of ecc calculation steps per page
* @phys_erase_shift: [INTERN] number of address bits in a physical eraseblock
* @bbt_erase_shift: [INTERN] number of address bits in a bbt entry
* @chip_shift: [INTERN] number of address bits in one chip
- * @data_buf: [INTERN] internal buffer for one page + oob
+ * @data_buf: [INTERN] internal buffer for one page + oob
* @oob_buf: [INTERN] oob buffer for one eraseblock
* @oobdirty: [INTERN] indicates that oob_buf must be reinitialized
* @data_poi: [INTERN] pointer to a data buffer
* @bbt: [INTERN] bad block table pointer
* @bbt_td: [REPLACEABLE] bad block table descriptor for flash lookup
* @bbt_md: [REPLACEABLE] bad block table mirror descriptor
- * @badblock_pattern: [REPLACEABLE] bad block scan pattern used for initial bad block scan
+ * @badblock_pattern: [REPLACEABLE] bad block scan pattern used for initial bad block scan
* @controller: [OPTIONAL] a pointer to a hardware controller structure which is shared among multiple independend devices
* @priv: [OPTIONAL] pointer to private chip date
*/
-
+
struct nand_chip {
void __iomem *IO_ADDR_R;
void __iomem *IO_ADDR_W;
-
+
u_char (*read_byte)(struct mtd_info *mtd);
void (*write_byte)(struct mtd_info *mtd, u_char byte);
u16 (*read_word)(struct mtd_info *mtd);
void (*write_word)(struct mtd_info *mtd, u16 word);
-
+
void (*write_buf)(struct mtd_info *mtd, const u_char *buf, int len);
void (*read_buf)(struct mtd_info *mtd, u_char *buf, int len);
int (*verify_buf)(struct mtd_info *mtd, const u_char *buf, int len);
* @name: Identify the device type
* @id: device ID code
* @pagesize: Pagesize in bytes. Either 256 or 512 or 0
- * If the pagesize is 0, then the real pagesize
+ * If the pagesize is 0, then the real pagesize
* and the eraseize are determined from the
* extended id bytes in the chip
* @erasesize: Size of an erase block in the flash device.
extern struct nand_flash_dev nand_flash_ids[];
extern struct nand_manufacturers nand_manuf_ids[];
-/**
+/**
* struct nand_bbt_descr - bad block table descriptor
* @options: options for this descriptor
* @pages: the page(s) where we find the bbt, used with option BBT_ABSPAGE
* @version: version read from the bbt page during scan
* @len: length of the pattern, if 0 no pattern check is performed
* @maxblocks: maximum number of blocks to search for a bbt. This number of
- * blocks is reserved at the end of the device where the tables are
+ * blocks is reserved at the end of the device where the tables are
* written.
* @reserved_block_code: if non-0, this pattern denotes a reserved (rather than
* bad) block in the stored bbt
- * @pattern: pattern to identify bad block table or factory marked good /
+ * @pattern: pattern to identify bad block table or factory marked good /
* bad blocks, can be NULL, if len = 0
*
- * Descriptor for the bad block table marker and the descriptor for the
+ * Descriptor for the bad block table marker and the descriptor for the
* pattern which identifies good and bad blocks. The assumption is made
* that the pattern and the version count are always located in the oob area
* of the first block.
#ifndef _NAND_H_
#define _NAND_H_
-#include <linux_compat.h>
+#include <linux/mtd/compat.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
projects / u-boot.git / commitdiff