OMAP[34]: fix broken timer

As implemented now the timer used to implement __udelay counts
to 0xffffffff and then gets stuck there because the the programmed
reload value is 0xffffffff.  This value is not only wrong but
illegal according to the reference manual.

One can reproduce the bug by leaving a board at the u-boot prompt
for sometime then issuing a sleep command.  The sleep will hang
forever.

The timer is a count up timer that reloads as it rolls over
from 0xffffffff so the correct load value is 0.

Change TIMER_LOAD_VAL from 0xffffffff to 0 and introduce
a new constant called TIMER_OVERFLOW_VAL set to 0xffffffff.

Signed-off-by: John Rigby <john.rigby@linaro.org>
Tested-by: Igor Grinberg <grinberg@compulab.co.il>

diff --git a/arch/arm/cpu/armv7/omap-common/timer.c b/arch/arm/cpu/armv7/omap-common/timer.c
index 9beebb1e7451d21fbd1c6ed3a142fd07667105ae..59bbca84a682579319e5d3245411e94c75586ca9 100644 (file)
--- a/arch/arm/cpu/armv7/omap-common/timer.c
+++ b/arch/arm/cpu/armv7/omap-common/timer.c
@@ -43,8 +43,9 @@ static struct gptimer *timer_base = (struct gptimer *)CONFIG_SYS_TIMERBASE;
  * Nothing really to do with interrupts, just starts up a counter.
  */
 
-#define TIMER_CLOCK    (V_SCLK / (2 << CONFIG_SYS_PTV))
-#define TIMER_LOAD_VAL 0xffffffff
+#define TIMER_CLOCK            (V_SCLK / (2 << CONFIG_SYS_PTV))
+#define TIMER_OVERFLOW_VAL     0xffffffff
+#define TIMER_LOAD_VAL         0
 
 int timer_init(void)
 {
@@ -86,7 +87,7 @@ void __udelay(unsigned long usec)
        while (tmo > 0) {
                now = readl(&timer_base->tcrr);
                if (last > now) /* count up timer overflow */
-                       tmo -= TIMER_LOAD_VAL - last + now;
+                       tmo -= TIMER_OVERFLOW_VAL - last + now + 1;
                else
                        tmo -= now - last;
                last = now;