Remove the obsolete terse version of do_mii()

We now have more useful version of do_mii() and everybody use it.
Gerald Van Baren says:

> When I originally wrote the mii command 6(!) years ago, I wrote a
> verbose version that printed human readable decomposition of the flags,
> etc., and a terse one that didn't print as much stuff and thus had a
> smaller memory footprint.
>
> It sounds like the terse version has withered and died, apparently
> people are only using the verbose version (which is very understandable,
> I do myself).

Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>

diff --git a/common/cmd_mii.c b/common/cmd_mii.c
index 079612a4e65644659a7e7899ad56265b05a1b32c..31ac43db588849ebbedbed7f06537ac674cfd32c 100644 (file)
--- a/common/cmd_mii.c
+++ b/common/cmd_mii.c
@@ -29,143 +29,6 @@
 #include <command.h>
 #include <miiphy.h>
 
-#ifdef CONFIG_TERSE_MII
-/*
- * Display values from last command.
- */
-uint last_op;
-uint last_addr;
-uint last_data;
-uint last_reg;
-
-/*
- * MII device/info/read/write
- *
- * Syntax:
- *  mii device {devname}
- *  mii info   {addr}
- *  mii read   {addr} {reg}
- *  mii write  {addr} {reg} {data}
- */
-int do_mii (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
-{
-       char            op;
-       unsigned char   addr, reg;
-       unsigned short  data;
-       int             rcode = 0;
-       char            *devname;
-
-       if (argc < 2) {
-               printf ("Usage:\n%s\n", cmdtp->usage);
-               return 1;
-       }
-
-#if defined(CONFIG_8xx) || defined(CONFIG_MCF52x2)
-       mii_init ();
-#endif
-
-       /*
-        * We use the last specified parameters, unless new ones are
-        * entered.
-        */
-       op   = last_op;
-       addr = last_addr;
-       data = last_data;
-       reg  = last_reg;
-
-       if ((flag & CMD_FLAG_REPEAT) == 0) {
-               op = argv[1][0];
-               if (argc >= 3)
-                       addr = simple_strtoul (argv[2], NULL, 16);
-               if (argc >= 4)
-                       reg  = simple_strtoul (argv[3], NULL, 16);
-               if (argc >= 5)
-                       data = simple_strtoul (argv[4], NULL, 16);
-       }
-
-       /* use current device */
-       devname = miiphy_get_current_dev();
-
-       /*
-        * check device/read/write/list.
-        */
-       if (op == 'i') {
-               unsigned char j, start, end;
-               unsigned int oui;
-               unsigned char model;
-               unsigned char rev;
-
-               /*
-                * Look for any and all PHYs.  Valid addresses are 0..31.
-                */
-               if (argc >= 3) {
-                       start = addr; end = addr + 1;
-               } else {
-                       start = 0; end = 31;
-               }
-
-               for (j = start; j < end; j++) {
-                       if (miiphy_info (devname, j, &oui, &model, &rev) == 0) {
-                               printf ("PHY 0x%02X: "
-                                       "OUI = 0x%04X, "
-                                       "Model = 0x%02X, "
-                                       "Rev = 0x%02X, "
-                                       "%3dbase%s, %s\n",
-                                       j, oui, model, rev,
-                                       miiphy_speed (devname, j),
-                                       miiphy_is_1000base_x (devname, j)
-                                               ? "X" : "T",
-                                       (miiphy_duplex (devname, j) == FULL)
-                                               ? "FDX" : "HDX");
-                       }
-               }
-       } else if (op == 'r') {
-               if (miiphy_read (devname, addr, reg, &data) != 0) {
-                       puts ("Error reading from the PHY\n");
-                       rcode = 1;
-               } else {
-                       printf ("%04X\n", data & 0x0000FFFF);
-               }
-       } else if (op == 'w') {
-               if (miiphy_write (devname, addr, reg, data) != 0) {
-                       puts ("Error writing to the PHY\n");
-                       rcode = 1;
-               }
-       } else if (op == 'd') {
-               if (argc == 2)
-                       miiphy_listdev ();
-               else
-                       miiphy_set_current_dev (argv[2]);
-       } else {
-               printf ("Usage:\n%s\n", cmdtp->usage);
-               return 1;
-       }
-
-       /*
-        * Save the parameters for repeats.
-        */
-       last_op = op;
-       last_addr = addr;
-       last_data = data;
-       last_reg = reg;
-
-       return rcode;
-}
-
-/***************************************************/
-
-U_BOOT_CMD(
-       mii,    5,      1,      do_mii,
-       "mii     - MII utility commands\n",
-       "device                     - list available devices\n"
-       "mii device <devname>           - set current device\n"
-       "mii info   <addr>              - display MII PHY info\n"
-       "mii read   <addr> <reg>        - read  MII PHY <addr> register <reg>\n"
-       "mii write  <addr> <reg> <data> - write MII PHY <addr> register <reg>\n"
-);
-
-#else /* ! CONFIG_TERSE_MII ================================================= */
-
 typedef struct _MII_reg_desc_t {
        ushort regno;
        char * name;
@@ -599,5 +462,3 @@ U_BOOT_CMD(
        "mii dump   <addr> <reg>        - pretty-print <addr> <reg> (0-5 only)\n"
        "Addr and/or reg may be ranges, e.g. 2-7.\n"
 );
-
-#endif /* CONFIG_TERSE_MII */