* 802.11a/b/g/n WiFi, Bluetooth
The HiKey schematic can be found here: -
-https://github.com/96boards/documentation/blob/master/hikey/96Boards-Hikey-Rev-A1.pdf
+https://github.com/96boards/documentation/blob/master/consumer/hikey/hikey620/hardware-docs/HiKey_schematics_LeMaker_version_Rev_A1.pdf
-A SoC datasheet can be found here: -
-https://github.com/96boards/documentation/blob/master/hikey/
-Hi6220V100_Multi-Mode_Application_Processor_Function_Description.pdf
+The SoC datasheet can be found here: -
+https://github.com/96boards/documentation/blob/master/consumer/hikey/hikey620/hardware-docs/Hi6220V100_Multi-Mode_Application_Processor_Function_Description.pdf
Currently the u-boot port supports: -
* USB
> mkdir -p ~/hikey/src ~/hikey/bin
> cd ~/hikey/src
- > git clone https://github.com/96boards/edk2.git
- > git clone https://github.com/96boards/arm-trusted-firmware.git
- > git clone https://github.com/96boards/l-loader.git
- > git clone https://github.com/96boards/burn-boot.git
+ > git clone https://github.com/96boards-hikey/edk2 -b testing/hikey960_v2.5
+ > git clone https://github.com/ARM-software/arm-trusted-firmware
+ > git clone https://github.com/96boards-hikey/l-loader -b testing/hikey960_v1.2
+ > git clone https://github.com/96boards-hikey/OpenPlatformPkg -b testing/hikey960_v1.3.4
+ > git clone https://github.com/96boards-hikey/atf-fastboot
+ > wget https://snapshots.linaro.org/96boards/reference-platform/components/uefi-staging/latest/hikey/release/hisi-idt.py
Get the BL30 mcuimage.bin binary. It is shipped as part of the UEFI source.
-The latest version can be obtained from the edk2 repo.
+The latest version can be obtained from the OpenPlatformPkg repo.
- > cp edk2/HisiPkg/HiKeyPkg/NonFree/mcuimage.bin ~/hikey/bin/
+ > cp OpenPlatformPkg/Platforms/Hisilicon/HiKey/Binary/mcuimage.bin ~/hikey/bin/
-Get nvme.img binary (check this link is still the latest)
- > wget -P ~/hikey/bin https://builds.96boards.org/releases/reference-platform/debian/hikey/16.03/bootloader/nvme.img
+Get nvme.img binary
+ > wget -P ~/hikey/bin https://snapshots.linaro.org/96boards/reference-platform/components/uefi-staging/latest/hikey/release/nvme.img
Compile U-Boot
==============
> cd ~/hikey/src/arm-trusted-firmware
> make CROSS_COMPILE=aarch64-linux-gnu- all fip \
- BL30=~/hikey/bin/mcuimage.bin \
+ SCP_BL2=~/hikey/bin/mcuimage.bin \
BL33=~/hikey/bin/u-boot.bin DEBUG=1 PLAT=hikey
-Copy resulting binaries
- > cp build/hikey/debug/bl1.bin ~/hikey/bin
+Copy the resulting FIP binary
> cp build/hikey/debug/fip.bin ~/hikey/bin
+Compile ATF Fastboot
+====================
+
+ > cd ~/hikey/src/atf-fastboot
+ > make CROSS_COMPILE=aarch64-linux-gnu- PLAT=hikey DEBUG=1
+
Compile l-loader
-===============
+================
> cd ~/hikey/src/l-loader
- > make BL1=~/hikey/bin/bl1.bin all
+ > ln -sf ~/hikey/src/arm-trusted-firmware/build/hikey/debug/bl1.bin
+ > ln -sf ~/hikey/src/arm-trusted-firmware/build/hikey/debug/bl2.bin
+ > ln -sf ~/hikey/src/atf-fastboot/build/hikey/debug/bl1.bin fastboot.bin
+ > make hikey PTABLE_LST=aosp-8g
+
+Copy the resulting binaries
> cp *.img ~/hikey/bin
> cp l-loader.bin ~/hikey/bin
+ > cp recovery.bin ~/hikey/bin
These instructions are adapted from
-https://github.com/96boards/documentation/wiki/HiKeyUEFI
+https://github.com/ARM-software/arm-trusted-firmware/blob/master/docs/plat/hikey.rst
FLASHING
========
1. Connect the second jumper on J15 BOOT SEL, to go into recovery mode and flash l-loader.bin with
-the hisi-idt.py utility.
+the hisi-idt.py utility. Then connect a USB A to B mini cable from your PC to the USB OTG port of HiKey and execute the below command.
The command below assumes HiKey enumerated as the first USB serial port
- > sudo ~/hikey/src/burn-boot/hisi-idt.py -d /dev/ttyUSB0 --img1=~/hikey/bin/l-loader.bin
-2. Once LED 0 comes on solid, HiKey board should be detected as a fastboot device by plugging a USB A to mini B
- cable from your PC to the USB OTG port of HiKey (on some boards I've found this to be unreliable).
+ > sudo python ~/hikey/src/hisi-idt.py -d /dev/ttyUSB0 --img1 ~/hikey/bin/recovery.bin
+
+2. Once LED 0 comes on solid, HiKey board should be detected as a fastboot device.
> sudo fastboot devices
3. Flash the images
- > sudo fastboot flash ptable ~/hikey/bin/ptable.img
+ > sudo fastboot flash ptable ~/hikey/bin/prm_ptable.img
+ > sudo fastboot flash loader ~/hikey/bin/l-loader.bin
> sudo fastboot flash fastboot ~/hikey/bin/fip.bin
> sudo fastboot flash nvme ~/hikey/bin/nvme.img
4. Disconnect second jumper on J15 BOOT SEL, and reset the board and you will now (hopefully)
- have ATF, booting u-boot from eMMC. On 'new' boards I've had to do the
- flashing twice in the past to avoid an ATF error.
+ have ATF, booting u-boot from eMMC.
Note: To get USB host working, also disconnect the USB OTG cable used for flashing. Otherwise you
will get 'dwc_otg_core_host_init: Timeout!' errors.
-See working boot trace below (by default trace is now output to UART3 not UART0 on latest
-ATF, U-Boot and Kernel sources): -
+See working boot trace below on UART3 available at Low Speed Expansion header: -
-debug EMMC boot: send RST_N .
-debug EMMC boot: start eMMC boot......
-load fastboot1!
-
-Switch to aarch64 mode. CPU0 executes at 0xf9801000!
-
-INFO: BL1: 0xf9810000 - 0xf9817000 [size = 28672]
-NOTICE: Booting Trusted Firmware
-NOTICE: BL1: v1.1(debug):e8b7174
-NOTICE: BL1: Built : 19:16:44, Sep 8 2015
-INFO: BL1: RAM 0xf9810000 - 0xf9817000
-NOTICE: syspll frequency:1190494208Hz
-NOTICE: succeed to init lpddr3 rank0 dram phy
-INFO: lpddr3_freq_init, set ddrc 533mhz
-INFO: init ddr3 rank0
+NOTICE: BL2: v1.5(debug):v1.5-694-g6d4f6aea
+NOTICE: BL2: Built : 09:21:42, Aug 29 2018
+INFO: BL2: Doing platform setup
+INFO: ddr3 rank1 init pass
+INFO: succeed to set ddrc 150mhz
+INFO: ddr3 rank1 init pass
+INFO: succeed to set ddrc 266mhz
INFO: ddr3 rank1 init pass
-INFO: lpddr3_freq_init, set ddrc 800mhz
-INFO: init ddr3 rank0
+INFO: succeed to set ddrc 400mhz
INFO: ddr3 rank1 init pass
-INFO: Elpida DDR
+INFO: succeed to set ddrc 533mhz
+INFO: ddr3 rank1 init pass
+INFO: succeed to set ddrc 800mhz
+INFO: Samsung DDR
INFO: ddr test value:0xa5a55a5a
-INFO: Hisilicon HiKey platform is initialized
-INFO: Using FIP
-INFO: Loading file 'bl2.bin' at address 0xf9818000
-INFO: File 'bl2.bin' loaded: 0xf9818000 - 0xf9821100
-NOTICE: BL1: Booting BL2
-INFO: BL1: BL2 address = 0xf9818000
-INFO: BL1: BL2 spsr = 0x3c5
+INFO: BL2: TrustZone: protecting 16777216 bytes of memory at 0x3f000000
+INFO: BL2: TrustZone: protecting 4194304 bytes of memory at 0x3e800000
INFO: [BDID] [fff91c18] midr: 0x410fd033
-INFO: [BDID] [fff91c1c] board type: 0
-INFO: [BDID] [fff91c20] board id: 0x2b
INFO: init_acpu_dvfs: pmic version 17
INFO: init_acpu_dvfs: ACPU_CHIP_MAX_FREQ=0x186a00.
INFO: acpu_dvfs_volt_init: success!
INFO: - 2: 0x50
INFO: - 3: 0x60
INFO: - 4: 0x78
-NOTICE: acpu_dvfs_set_freq: set acpu freq success!NOTICE: BL2: v1.1(debug):e8b7174
-NOTICE: BL2: Built : 19:16:46, Sep 8 2015
-INFO: BL2: Loading BL3-0
-INFO: Using FIP
-INFO: Loading file 'bl30.bin' at address 0x1000000
-INFO: Skip reserving memory: 0x1000000 - 0x1023270
-INFO: File 'bl30.bin' loaded: 0x1000000 - 0x1023270
-INFO: bl2_plat_handle_bl30: [1000000] 3a334d43 34313032 2f38302f 30203133
-INFO: bl2_plat_handle_bl30: [10000c8] 0 0 b 0
-INFO: bl2_plat_handle_bl30: [1000190] 17 0 0 0
-INFO: bl2_plat_handle_bl30: [1023260] 0 0 0 0
+NOTICE: acpu_dvfs_set_freq: set acpu freq success!INFO: BL2: Loading image id 2
+INFO: Loading image id=2 at address 0x1000000
+INFO: Image id=2 loaded: 0x1000000 - 0x1023d00
INFO: hisi_mcu_load_image: mcu sections 0:
INFO: hisi_mcu_load_image: src = 0x1000200
INFO: hisi_mcu_load_image: dst = 0xf6000000
-INFO: hisi_mcu_load_image: size = 512
-INFO: hisi_mcu_load_image: [SRC 0x1000200] 0x7600 0x201 0x1eae1 0x1ea71
-INFO: hisi_mcu_load_image: [DST 0xf6000000] 0x7600 0x201 0x1eae1 0x1ea71
+INFO: hisi_mcu_load_image: size = 31184
+INFO: hisi_mcu_load_image: [SRC 0x1000200] 0x8000 0x3701 0x7695 0x7689
+INFO: hisi_mcu_load_image: [DST 0xf6000000] 0x8000 0x3701 0x7695 0x7689
INFO: hisi_mcu_load_image: mcu sections 1:
-INFO: hisi_mcu_load_image: src = 0x1000400
-INFO: hisi_mcu_load_image: dst = 0xf6000200
-INFO: hisi_mcu_load_image: size = 27828
-INFO: hisi_mcu_load_image: [SRC 0x1000400] 0xbf00bf00 0x4815b672 0x48154780 0x60014915
-INFO: hisi_mcu_load_image: [DST 0xf6000200] 0xbf00bf00 0x4815b672 0x48154780 0x60014915
+INFO: hisi_mcu_load_image: src = 0x1007bd0
+INFO: hisi_mcu_load_image: dst = 0x5e00000
+INFO: hisi_mcu_load_image: size = 93828
+INFO: hisi_mcu_load_image: [SRC 0x1007bd0] 0xf000b510 0x2103fb3d 0xf0004604 0xf003fb57
+INFO: hisi_mcu_load_image: [DST 0x5e00000] 0xf000b510 0x2103fb3d 0xf0004604 0xf003fb57
INFO: hisi_mcu_load_image: mcu sections 2:
-INFO: hisi_mcu_load_image: src = 0x10070b4
-INFO: hisi_mcu_load_image: dst = 0xf6007200
-INFO: hisi_mcu_load_image: size = 1024
-INFO: hisi_mcu_load_image: [SRC 0x10070b4] 0x55 0x0 0x0 0x0
-INFO: hisi_mcu_load_image: [DST 0xf6007200] 0x55 0x0 0x0 0x0
+INFO: hisi_mcu_load_image: src = 0x101ea54
+INFO: hisi_mcu_load_image: dst = 0x5e16e84
+INFO: hisi_mcu_load_image: size = 15428
+INFO: hisi_mcu_load_image: [SRC 0x101ea54] 0x9 0x1020640 0x10001 0x8f0d180
+INFO: hisi_mcu_load_image: [DST 0x5e16e84] 0x9 0x1020640 0x10001 0x8f0d180
INFO: hisi_mcu_load_image: mcu sections 3:
-INFO: hisi_mcu_load_image: src = 0x10074b4
-INFO: hisi_mcu_load_image: dst = 0xfff8e000
-INFO: hisi_mcu_load_image: size = 12704
-INFO: hisi_mcu_load_image: [SRC 0x10074b4] 0x55 0x0 0x0 0x0
-INFO: hisi_mcu_load_image: [DST 0xfff8e000] 0x55 0x0 0x0 0x0
-INFO: hisi_mcu_load_image: mcu sections 4:
-INFO: hisi_mcu_load_image: src = 0x100a654
-INFO: hisi_mcu_load_image: dst = 0x5e00000
-INFO: hisi_mcu_load_image: size = 82912
-INFO: hisi_mcu_load_image: [SRC 0x100a654] 0x4ff0e92d 0x2cc5f645 0x2600b0ab 0x2c7cf6c0
-INFO: hisi_mcu_load_image: [DST 0x5e00000] 0x4ff0e92d 0x2cc5f645 0x2600b0ab 0x2c7cf6c0
-INFO: hisi_mcu_load_image: mcu sections 5:
-INFO: hisi_mcu_load_image: src = 0x101ea34
-INFO: hisi_mcu_load_image: dst = 0x5e143e0
-INFO: hisi_mcu_load_image: size = 12816
-INFO: hisi_mcu_load_image: [SRC 0x101ea34] 0x33323130 0x37363534 0x42413938 0x46454443
-INFO: hisi_mcu_load_image: [DST 0x5e143e0] 0x33323130 0x37363534 0x42413938 0x46454443
-INFO: hisi_mcu_load_image: mcu sections 6:
-INFO: hisi_mcu_load_image: src = 0x1021c44
-INFO: hisi_mcu_load_image: dst = 0x5e1c1d0
+INFO: hisi_mcu_load_image: src = 0x1022698
+INFO: hisi_mcu_load_image: dst = 0x5e22a10
INFO: hisi_mcu_load_image: size = 3060
-INFO: hisi_mcu_load_image: [SRC 0x1021c44] 0x0 0x0 0x0 0x0
-INFO: hisi_mcu_load_image: [DST 0x5e1c1d0] 0x0 0x0 0x0 0x0
-INFO: hisi_mcu_load_image: mcu sections 7:
-INFO: hisi_mcu_load_image: src = 0x1022838
-INFO: hisi_mcu_load_image: dst = 0x5e1cdc4
+INFO: hisi_mcu_load_image: [SRC 0x1022698] 0x0 0x0 0x0 0x0
+INFO: hisi_mcu_load_image: [DST 0x5e22a10] 0x0 0x0 0x0 0x0
+INFO: hisi_mcu_load_image: mcu sections 4:
+INFO: hisi_mcu_load_image: src = 0x102328c
+INFO: hisi_mcu_load_image: dst = 0x5e23604
INFO: hisi_mcu_load_image: size = 2616
-INFO: hisi_mcu_load_image: [SRC 0x1022838] 0xf80000a0 0x0 0xf80000ac 0x0
-INFO: hisi_mcu_load_image: [DST 0x5e1cdc4] 0xf80000a0 0x0 0xf80000ac 0x0
+INFO: hisi_mcu_load_image: [SRC 0x102328c] 0xf80000a0 0x0 0xf80000ac 0x0
+INFO: hisi_mcu_load_image: [DST 0x5e23604] 0xf80000a0 0x0 0xf80000ac 0x0
INFO: hisi_mcu_start_run: AO_SC_SYS_CTRL2=0
-INFO: bl2_plat_handle_bl30: mcu pc is 42933301
-INFO: bl2_plat_handle_bl30: AO_SC_PERIPH_CLKSTAT4 is 39018f09
-INFO: BL2: TrustZone: protecting 16777216 bytes of memory at 0x3f000000
-INFO: BL2: Loading BL3-1
-INFO: Using FIP
-INFO: Loading file 'bl31.bin' at address 0xf9858000
-INFO: File 'bl31.bin' loaded: 0xf9858000 - 0xf9861010
-INFO: BL2: Loading BL3-2
-INFO: Using FIP
-WARNING: Failed to access image 'bl32.bin' (-1)
-WARNING: Failed to load BL3-2 (-1)
-INFO: BL2: Loading BL3-3
-INFO: Using FIP
-INFO: Loading file 'bl33.bin' at address 0x35000000
-INFO: File 'bl33.bin' loaded: 0x35000000 - 0x3504c468
-NOTICE: BL1: Booting BL3-1
-INFO: BL1: BL3-1 address = 0xf9858000
-INFO: BL1: BL3-1 spsr = 0x3cd
-INFO: BL1: BL3-1 params address = 0xf9821920
-INFO: BL1: BL3-1 plat params address = 0x0
-NOTICE: BL3-1: v1.1(debug):e8b7174
-NOTICE: BL3-1: Built : 19:16:49, Sep 8 2015
-INFO: BL3-1: Initializing runtime services
-INFO: BL3-1: Preparing for EL3 exit to normal world
-INFO: BL3-1: Next image address = 0x35000000
-INFO: BL3-1: Next image spsr = 0x3c9
-
-U-Boot 2015.10-rc2 (Sep 08 2015 - 20:29:33 +0100)hikey
-
-DRAM: 1008 MiB
+INFO: plat_hikey_bl2_handle_scp_bl2: MCU PC is at 0x42933301
+INFO: plat_hikey_bl2_handle_scp_bl2: AO_SC_PERIPH_CLKSTAT4 is 0x3b018f09
+WARNING: BL2: Platform setup already done!!
+INFO: BL2: Loading image id 3
+INFO: Loading image id=3 at address 0xf9858000
+INFO: Image id=3 loaded: 0xf9858000 - 0xf9860058
+INFO: BL2: Loading image id 5
+INFO: Loading image id=5 at address 0x35000000
+INFO: Image id=5 loaded: 0x35000000 - 0x35061cd2
+NOTICE: BL2: Booting BL31
+INFO: Entry point address = 0xf9858000
+INFO: SPSR = 0x3cd
+NOTICE: BL31: v1.5(debug):v1.5-694-g6d4f6aea
+NOTICE: BL31: Built : 09:21:44, Aug 29 2018
+WARNING: Using deprecated integer interrupt array in gicv2_driver_data_t
+WARNING: Please migrate to using an interrupt_prop_t array
+INFO: ARM GICv2 driver initialized
+INFO: BL31: Initializing runtime services
+INFO: BL31: cortex_a53: CPU workaround for disable_non_temporal_hint was applied
+INFO: BL31: cortex_a53: CPU workaround for 843419 was applied
+INFO: BL31: cortex_a53: CPU workaround for 855873 was applied
+INFO: BL31: Preparing for EL3 exit to normal world
+INFO: Entry point address = 0x35000000
+INFO: SPSR = 0x3c9
+
+
+U-Boot 2018.09-rc1 (Aug 22 2018 - 14:55:49 +0530)hikey
+
+DRAM: 990 MiB
HI6553 PMIC init
-MMC: config_sd_carddetect: SD card not present
-HiKey DWMMC: 0, HiKey DWMMC: 1
-Card did not respond to voltage select!
-** Bad device mmc 1 **
-Using default environment
-
-In: serial
-Out: serial
-Err: serial
+MMC: config_sd_carddetect: SD card present
+Hisilicon DWMMC: 0, Hisilicon DWMMC: 1
+Loading Environment from FAT... Unable to use mmc 1:1... Failed (-5)
+In: uart@f7113000
+Out: uart@f7113000
+Err: uart@f7113000
Net: Net Initialization Skipped
No ethernet found.
Hit any key to stop autoboot: 0
starting USB...
-USB0: Core Release: 3.00a
-scanning bus 0 for devices... 2 USB Device(s) found
+USB0: scanning bus 0 for devices... 2 USB Device(s) found
scanning usb for storage devices... 0 Storage Device(s) found
scanning usb for ethernet devices... 0 Ethernet Device(s) found
projects / u-boot.git / commitdiff