SELI8 is a QorIQ LS1021a based service unit card used
in XMC20 and FOX615 product families.
+config TARGET_PG_WCOM_EXPU1
+ bool "Support Hitachi-Powergrids EXPU1 service unit card"
+ select ARCH_LS1021A
+ select ARCH_SUPPORT_PSCI
+ select BOARD_EARLY_INIT_F
+ select BOARD_LATE_INIT
+ select CPU_V7A
+ select CPU_V7_HAS_NONSEC
+ select CPU_V7_HAS_VIRT
+ select SYS_FSL_DDR
+ select FSL_DDR_INTERACTIVE
+ select VENDOR_KM
+ imply SCSI
+ help
+ Support for Hitachi-Powergrids EXPU1 service unit card.
+ EXPU1 is a QorIQ LS1021a based service unit card used
+ in XMC20 and FOX615 product families.
+
config TARGET_LS1021ATSN
bool "Support ls1021atsn"
select ARCH_LS1021A
ls1021a-twr-duart.dtb ls1021a-twr-lpuart.dtb \
ls1021a-iot-duart.dtb ls1021a-tsn.dtb
dtb-$(CONFIG_TARGET_PG_WCOM_SELI8) += ls1021a-pg-wcom-seli8.dtb
+dtb-$(CONFIG_TARGET_PG_WCOM_EXPU1) += ls1021a-pg-wcom-expu1.dtb
dtb-$(CONFIG_FSL_LSCH3) += fsl-ls2080a-qds.dtb \
fsl-ls2080a-qds-42-x.dtb \
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Hitachi ABB Power Grids EXPU1 board device tree source
+ *
+ * Copyright 2020 Hitachi ABB Power Grids
+ *
+ * Copyright 2013-2015 Freescale Semiconductor, Inc.
+ */
+
+/dts-v1/;
+#include "ls1021a.dtsi"
+
+/ {
+ model = "EXPU1 Service Unit for XMC and FOX";
+
+ aliases {
+ enet2-rgmii-debug-phy = &debug_phy;
+ };
+
+ chosen {
+ stdout-path = &uart0;
+ };
+};
+
+&enet0 {
+ status = "okay";
+ tbi-handle = <&tbi0>;
+ phy-connection-type = "sgmii";
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+&enet1 {
+ status = "okay";
+ tbi-handle = <&tbi1>;
+ phy-connection-type = "sgmii";
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+&enet2 {
+ phy-handle = <&debug_phy>;
+ phy-connection-type = "rgmii-id";
+ max-speed = <100>;
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+};
+
+&dspi1 {
+ bus-num = <0>;
+ status = "okay";
+ zl30343@0 {
+ compatible = "gen,spidev", "zarlink,zl30343";
+ reg = <0>;
+ spi-max-frequency = <8000000>;
+ };
+};
+
+&ifc {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ /* NOR Flash on board */
+ ranges = <0x0 0x0 0x60000000 0x04000000>;
+ status = "okay";
+
+ nor@0,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "cfi-flash";
+ reg = <0x0 0x0 0x4000000>;
+ bank-width = <2>;
+ device-width = <1>;
+
+ partition@0 {
+ label = "rcw";
+ reg = <0x0 0x20000>;
+ read-only;
+ };
+ partition@20000 {
+ label = "qe";
+ reg = <0x20000 0x20000>;
+ };
+ /* ZL30343 init data to be added here */
+ partition@40000 {
+ label = "envred";
+ reg = <0x40000 0x20000>;
+ };
+ partition@60000 {
+ label = "env";
+ reg = <0x60000 0x20000>;
+ };
+ partition@100000 {
+ label = "u-boot";
+ reg = <0x100000 0x100000>;
+ };
+ partition@200000 {
+ label = "ubi0";
+ reg = <0x200000 0x3E00000>;
+ };
+ };
+};
+
+&mdio0 {
+ debug_phy: ethernet-phy@11 {
+ reg = <0x11>;
+ };
+
+ tbi0: tbi-phy@0xb {
+ reg = <0xb>;
+ device_type = "tbi-phy";
+ };
+};
+
+&mdio1 {
+ tbi1: tbi-phy@0xd {
+ reg = <0xd>;
+ device_type = "tbi-phy";
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
help
IFC Base Address for PAXx FPGA.
+config SYS_CLIPS_BASE
+ hex "CLIPS IFC Base Address"
+ default 0x78000000
+ depends on ARCH_LS1021A
+ help
+ IFC Base Address for CLIPS FPGA.
+
config KM_CONSOLE_TTY
string "KM Console"
default "ttyS0"
imply FS_CRAMFS
endif
+
+if TARGET_PG_WCOM_EXPU1
+
+config SYS_BOARD
+ default "pg-wcom-ls102xa"
+
+config SYS_VENDOR
+ default "keymile"
+
+config SYS_SOC
+ default "ls102xa"
+
+config SYS_CONFIG_NAME
+ default "pg-wcom-expu1"
+
+config BOARD_SPECIFIC_OPTIONS
+ def_bool y
+ imply FS_CRAMFS
+
+endif
F: board/keymile/pg-wcom-ls102xa/
F: include/configs/km/pg-wcom-ls102xa.h
F: include/configs/pg-wcom-seli8.h
+F: include/configs/pg-wcom-expu1.h
F: configs/pg_wcom_seli8_defconfig
+F: configs/pg_wcom_expu1_defconfig
F: arch/arm/dts/ls1021a-pg-wcom-seli8.dts
+F: arch/arm/dts/ls1021a-pg-wcom-expu1.dts
/* QRIO Configuration */
qrio_uprstreq(UPREQ_CORE_RST);
- if (IS_ENABLED(CONFIG_TARGET_PG_WCOM_SELI8)) {
- qrio_prstcfg(KM_LIU_RST, PRSTCFG_POWUP_UNIT_RST);
- qrio_wdmask(KM_LIU_RST, true);
+#if CONFIG_IS_ENABLED(TARGET_PG_WCOM_SELI8)
+ qrio_prstcfg(KM_LIU_RST, PRSTCFG_POWUP_UNIT_RST);
+ qrio_wdmask(KM_LIU_RST, true);
- qrio_prstcfg(KM_PAXK_RST, PRSTCFG_POWUP_UNIT_RST);
- qrio_wdmask(KM_PAXK_RST, true);
+ qrio_prstcfg(KM_PAXK_RST, PRSTCFG_POWUP_UNIT_RST);
+ qrio_wdmask(KM_PAXK_RST, true);
+#endif
- qrio_prstcfg(KM_DBG_ETH_RST, PRSTCFG_POWUP_UNIT_CORE_RST);
- qrio_prst(KM_DBG_ETH_RST, false, false);
- }
+#if CONFIG_IS_ENABLED(TARGET_PG_WCOM_EXPU1)
+ qrio_prstcfg(WCOM_TMG_RST, PRSTCFG_POWUP_UNIT_RST);
+ qrio_wdmask(WCOM_TMG_RST, true);
+
+ qrio_prstcfg(WCOM_PHY_RST, PRSTCFG_POWUP_UNIT_RST);
+ qrio_prst(WCOM_PHY_RST, false, false);
+
+ qrio_prstcfg(WCOM_QSFP_RST, PRSTCFG_POWUP_UNIT_RST);
+ qrio_wdmask(WCOM_QSFP_RST, true);
+
+ qrio_prstcfg(WCOM_CLIPS_RST, PRSTCFG_POWUP_UNIT_RST);
+ qrio_prst(WCOM_CLIPS_RST, false, false);
+#endif
+ qrio_prstcfg(KM_DBG_ETH_RST, PRSTCFG_POWUP_UNIT_CORE_RST);
+ qrio_prst(KM_DBG_ETH_RST, false, false);
i2c_deblock_gpio_cfg();
--- /dev/null
+CONFIG_ARM=y
+CONFIG_TARGET_PG_WCOM_EXPU1=y
+CONFIG_SYS_TEXT_BASE=0x60100000
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_KM_DEF_NETDEV="eth2"
+CONFIG_KM_COMMON_ETH_INIT=y
+CONFIG_PIGGY_MAC_ADDRESS_OFFSET=3
+CONFIG_SYS_MEMTEST_START=0x80000000
+CONFIG_SYS_MEMTEST_END=0x9fffffff
+CONFIG_ENV_SIZE=0x4000
+CONFIG_ENV_SECT_SIZE=0x20000
+CONFIG_BOOTCOUNT_BOOTLIMIT=3
+CONFIG_SYS_BOOTCOUNT_ADDR=0x70000020
+CONFIG_DEFAULT_DEVICE_TREE="ls1021a-pg-wcom-expu1"
+CONFIG_AHCI=y
+CONFIG_DISTRO_DEFAULTS=y
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_OF_STDOUT_VIA_ALIAS=y
+CONFIG_BOOTDELAY=3
+CONFIG_USE_BOOTARGS=y
+CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0"
+CONFIG_SILENT_CONSOLE=y
+CONFIG_MISC_INIT_R=y
+CONFIG_LAST_STAGE_INIT=y
+CONFIG_CMD_IMLS=y
+CONFIG_CMD_GREPENV=y
+CONFIG_CMD_MEMINFO=y
+CONFIG_CMD_MEMTEST=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_NAND=y
+CONFIG_CMD_NAND_TRIMFFS=y
+CONFIG_CMD_CRAMFS=y
+CONFIG_CMD_MTDPARTS=y
+CONFIG_MTDIDS_DEFAULT="nor0=60000000.nor,nand0=68000000.flash"
+CONFIG_MTDPARTS_DEFAULT="mtdparts=60000000.nor:128k(rcw),128k(qe),128k(envred),128k(env),512k(res),1m(u-boot),-(ubi0);68000000.flash:-(ubi1)"
+CONFIG_CMD_UBI=y
+CONFIG_OF_CONTROL=y
+CONFIG_ENV_IS_IN_FLASH=y
+CONFIG_ENV_OVERWRITE=y
+CONFIG_ENV_ADDR=0x60060000
+CONFIG_ENV_ADDR_REDUND=0x60040000
+CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
+CONFIG_DM=y
+CONFIG_BOOTCOUNT_LIMIT=y
+CONFIG_SYS_FSL_DDR3=y
+# CONFIG_MMC is not set
+CONFIG_SYS_I2C_MXC=y
+CONFIG_SYS_I2C_MXC_I2C1=y
+CONFIG_SYS_I2C_MXC_I2C2=y
+CONFIG_SYS_I2C_MXC_I2C3=y
+CONFIG_MTD=y
+CONFIG_MTD_NOR_FLASH=y
+CONFIG_FLASH_CFI_DRIVER=y
+CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
+CONFIG_FLASH_CFI_MTD=y
+CONFIG_SYS_FLASH_CFI=y
+CONFIG_MTD_RAW_NAND=y
+CONFIG_PHY_MARVELL=y
+CONFIG_PHY_FIXED=y
+CONFIG_DM_ETH=y
+CONFIG_DM_MDIO=y
+CONFIG_PHY_GIGE=y
+CONFIG_MII=y
+CONFIG_TSEC_ENET=y
+CONFIG_SPECIFY_CONSOLE_INDEX=y
+CONFIG_DM_SERIAL=y
+CONFIG_SYS_NS16550=y
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2020 Hitachi ABB Power Grids
+ */
+
+#ifndef __CONFIG_PG_WCOM_EXPU1_H
+#define __CONFIG_PG_WCOM_EXPU1_H
+
+#define WCOM_EXPU1
+#define CONFIG_HOSTNAME "EXPU1"
+
+#define CONFIG_KM_UBI_PARTITION_NAME_BOOT "ubi0"
+#define CONFIG_KM_UBI_PARTITION_NAME_APP "ubi1"
+
+/* CLIPS FPGA Definitions */
+#define CONFIG_SYS_CSPR3_EXT (0x00)
+#define CONFIG_SYS_CSPR3 (CSPR_PHYS_ADDR(CONFIG_SYS_CLIPS_BASE) | \
+ CSPR_PORT_SIZE_8 | \
+ CSPR_MSEL_GPCM | \
+ CSPR_V)
+#define CONFIG_SYS_AMASK3 IFC_AMASK(64 * 1024)
+#define CONFIG_SYS_CSOR3 (CSOR_GPCM_ADM_SHIFT(0x4) | \
+ CSOR_GPCM_TRHZ_40)
+#define CONFIG_SYS_CS3_FTIM0 (FTIM0_GPCM_TACSE(0x6) | \
+ FTIM0_GPCM_TEADC(0x7) | \
+ FTIM0_GPCM_TEAHC(0x2))
+#define CONFIG_SYS_CS3_FTIM1 (FTIM1_GPCM_TACO(0x2) | \
+ FTIM1_GPCM_TRAD(0x12))
+#define CONFIG_SYS_CS3_FTIM2 (FTIM2_GPCM_TCS(0x3) | \
+ FTIM2_GPCM_TCH(0x1) | \
+ FTIM2_GPCM_TWP(0x12))
+#define CONFIG_SYS_CS3_FTIM3 0x04000000
+
+/* PRST */
+#define WCOM_CLIPS_RST 0
+#define WCOM_QSFP_RST 1
+#define WCOM_PHY_RST 2
+#define WCOM_TMG_RST 3
+#define KM_DBG_ETH_RST 15
+
+/* QRIO GPIOs used for deblocking */
+#define KM_I2C_DEBLOCK_PORT QRIO_GPIO_A
+#define KM_I2C_DEBLOCK_SCL 20
+#define KM_I2C_DEBLOCK_SDA 21
+
+/* ZL30343 on SPI */
+#define WCOM_ZL30343_CFG_ADDR 0xe8070000
+#define WCOM_ZL30343_SPI_BUS 0
+#define WCOM_ZL30343_CS 0
+
+#include "km/pg-wcom-ls102xa.h"
+
+#endif /* __CONFIG_PG_WCOM_EXPU1_H */
projects / u-boot.git / commitdiff