]> git.dujemihanovic.xyz Git - u-boot.git/commitdiff
fsl/sleep: updated the deep sleep framework for QorIQ platforms
authorTang Yuantian <Yuantian.Tang@freescale.com>
Fri, 21 Nov 2014 03:17:15 +0000 (11:17 +0800)
committerYork Sun <yorksun@freescale.com>
Thu, 11 Dec 2014 17:41:18 +0000 (09:41 -0800)
With the introducing of generic board and ARM-based cores, current
deep sleep framework doesn't work anymore.
This patch will convert the current framework to adapt this change.
Basically it does:
1. Converts all the Freescale's DDR driver to support deep sleep.
2. Added basic framework support for ARM-based and PPC-based
cores separately.

Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
board/freescale/common/Makefile
board/freescale/common/arm_sleep.c [new file with mode: 0644]
board/freescale/common/mpc85xx_sleep.c [new file with mode: 0644]
board/freescale/common/sleep.h [new file with mode: 0644]
drivers/ddr/fsl/arm_ddr_gen3.c
drivers/ddr/fsl/fsl_ddr_gen4.c
drivers/ddr/fsl/mpc85xx_ddr_gen3.c
include/fsl_ddr_sdram.h

index 59ddeefcdc5556096e9a2971726a5aa8ac4d3393..9a91b9008a83a5e7b0007a3311ef11b292377bab 100644 (file)
@@ -37,6 +37,12 @@ endif
 
 obj-$(CONFIG_FSL_DIU_CH7301)   += diu_ch7301.o
 
+ifdef CONFIG_ARM
+obj-$(CONFIG_DEEP_SLEEP)               += arm_sleep.o
+else
+obj-$(CONFIG_DEEP_SLEEP)               += mpc85xx_sleep.o
+endif
+
 obj-$(CONFIG_FSL_DCU_SII9022A)    += dcu_sii9022a.o
 
 obj-$(CONFIG_MPC8541CDS)       += cds_pci_ft.o
diff --git a/board/freescale/common/arm_sleep.c b/board/freescale/common/arm_sleep.c
new file mode 100644 (file)
index 0000000..8edf878
--- /dev/null
@@ -0,0 +1,95 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#if !defined(CONFIG_ARMV7_NONSEC) || !defined(CONFIG_ARMV7_VIRT)
+#error " Deep sleep needs non-secure mode support. "
+#else
+#include <asm/secure.h>
+#endif
+#include <asm/armv7.h>
+#include <asm/cache.h>
+
+#if defined(CONFIG_LS102XA)
+#include <asm/arch/immap_ls102xa.h>
+#endif
+
+#include "sleep.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+void __weak board_mem_sleep_setup(void)
+{
+}
+
+void __weak board_sleep_prepare(void)
+{
+}
+
+bool is_warm_boot(void)
+{
+       struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR;
+
+       if (in_be32(&gur->crstsr) & DCFG_CCSR_CRSTSR_WDRFR)
+               return 1;
+
+       return 0;
+}
+
+void fsl_dp_disable_console(void)
+{
+       gd->flags |= GD_FLG_SILENT | GD_FLG_DISABLE_CONSOLE;
+}
+
+/*
+ * When wakeup from deep sleep, the first 128 bytes space
+ * will be used to do DDR training which corrupts the data
+ * in there. This function will restore them.
+ */
+static void dp_ddr_restore(void)
+{
+       u64 *src, *dst;
+       int i;
+       struct ccsr_scfg __iomem *scfg = (void *)CONFIG_SYS_FSL_SCFG_ADDR;
+
+       /* get the address of ddr date from SPARECR3 */
+       src = (u64 *)in_le32(&scfg->sparecr[2]);
+       dst = (u64 *)CONFIG_SYS_SDRAM_BASE;
+
+       for (i = 0; i < DDR_BUFF_LEN / 8; i++)
+               *dst++ = *src++;
+
+       flush_dcache_all();
+}
+
+static void dp_resume_prepare(void)
+{
+       dp_ddr_restore();
+       board_sleep_prepare();
+       armv7_init_nonsec();
+       cleanup_before_linux();
+}
+
+int fsl_dp_resume(void)
+{
+       u32 start_addr;
+       void (*kernel_resume)(void);
+       struct ccsr_scfg __iomem *scfg = (void *)CONFIG_SYS_FSL_SCFG_ADDR;
+
+       if (!is_warm_boot())
+               return 0;
+
+       dp_resume_prepare();
+
+       /* Get the entry address and jump to kernel */
+       start_addr = in_le32(&scfg->sparecr[1]);
+       debug("Entry address is 0x%08x\n", start_addr);
+       kernel_resume = (void (*)(void))start_addr;
+       secure_ram_addr(_do_nonsec_entry)(kernel_resume, 0, 0, 0);
+
+       return 0;
+}
diff --git a/board/freescale/common/mpc85xx_sleep.c b/board/freescale/common/mpc85xx_sleep.c
new file mode 100644 (file)
index 0000000..f924e7f
--- /dev/null
@@ -0,0 +1,88 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/immap_85xx.h>
+#include "sleep.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+void __weak board_mem_sleep_setup(void)
+{
+}
+
+void __weak board_sleep_prepare(void)
+{
+}
+
+bool is_warm_boot(void)
+{
+       struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
+
+       if (in_be32(&gur->scrtsr[0]) & DCFG_CCSR_CRSTSR_WDRFR)
+               return 1;
+
+       return 0;
+}
+
+void fsl_dp_disable_console(void)
+{
+       gd->flags |= GD_FLG_SILENT | GD_FLG_DISABLE_CONSOLE;
+}
+
+/*
+ * When wakeup from deep sleep, the first 128 bytes space
+ * will be used to do DDR training which corrupts the data
+ * in there. This function will restore them.
+ */
+static void dp_ddr_restore(void)
+{
+       volatile u64 *src, *dst;
+       int i;
+       struct ccsr_scfg __iomem *scfg = (void *)CONFIG_SYS_MPC85xx_SCFG;
+
+       /* get the address of ddr date from SPARECR3 */
+       src = (u64 *)in_be32(&scfg->sparecr[2]);
+       dst = (u64 *)CONFIG_SYS_SDRAM_BASE;
+
+       for (i = 0; i < DDR_BUFF_LEN / 8; i++)
+               *dst++ = *src++;
+
+       flush_dcache();
+}
+
+static void dp_resume_prepare(void)
+{
+       dp_ddr_restore();
+
+       board_sleep_prepare();
+
+       l2cache_init();
+#if defined(CONFIG_RAMBOOT_PBL)
+       disable_cpc_sram();
+#endif
+       enable_cpc();
+}
+
+int fsl_dp_resume(void)
+{
+       u32 start_addr;
+       void (*kernel_resume)(void);
+       struct ccsr_scfg __iomem *scfg = (void *)CONFIG_SYS_MPC85xx_SCFG;
+
+       if (!is_warm_boot())
+               return 0;
+
+       dp_resume_prepare();
+
+       /* Get the entry address and jump to kernel */
+       start_addr = in_be32(&scfg->sparecr[1]);
+       debug("Entry address is 0x%08x\n", start_addr);
+       kernel_resume = (void (*)(void))start_addr;
+       kernel_resume();
+
+       return 0;
+}
diff --git a/board/freescale/common/sleep.h b/board/freescale/common/sleep.h
new file mode 100644 (file)
index 0000000..c26c542
--- /dev/null
@@ -0,0 +1,21 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __SLEEP_H
+#define __SLEEP_H
+
+#define DCFG_CCSR_CRSTSR_WDRFR (1 << 3)
+#define DDR_BUFF_LEN                   128
+
+/* determine if it is a wakeup from deep sleep */
+bool is_warm_boot(void);
+
+/* disable console output */
+void fsl_dp_disable_console(void);
+
+/* clean up everything and jump to kernel */
+int fsl_dp_resume(void);
+#endif
index 59f2fd661096964a79c4edcc302084c39a7adf80..c139da6da94de92e6df54b0dbf71c0730ea9432c 100644 (file)
@@ -92,7 +92,6 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
        ddr_out32(&ddr->timing_cfg_0, regs->timing_cfg_0);
        ddr_out32(&ddr->timing_cfg_1, regs->timing_cfg_1);
        ddr_out32(&ddr->timing_cfg_2, regs->timing_cfg_2);
-       ddr_out32(&ddr->sdram_cfg_2, regs->ddr_sdram_cfg_2);
        ddr_out32(&ddr->sdram_mode, regs->ddr_sdram_mode);
        ddr_out32(&ddr->sdram_mode_2, regs->ddr_sdram_mode_2);
        ddr_out32(&ddr->sdram_mode_3, regs->ddr_sdram_mode_3);
@@ -105,9 +104,6 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
        ddr_out32(&ddr->sdram_interval, regs->ddr_sdram_interval);
        ddr_out32(&ddr->sdram_data_init, regs->ddr_data_init);
        ddr_out32(&ddr->sdram_clk_cntl, regs->ddr_sdram_clk_cntl);
-       ddr_out32(&ddr->init_addr, regs->ddr_init_addr);
-       ddr_out32(&ddr->init_ext_addr, regs->ddr_init_ext_addr);
-
        ddr_out32(&ddr->timing_cfg_4, regs->timing_cfg_4);
        ddr_out32(&ddr->timing_cfg_5, regs->timing_cfg_5);
        ddr_out32(&ddr->ddr_zq_cntl, regs->ddr_zq_cntl);
@@ -128,7 +124,24 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
        ddr_out32(&ddr->ddr_sdram_rcw_1, regs->ddr_sdram_rcw_1);
        ddr_out32(&ddr->ddr_sdram_rcw_2, regs->ddr_sdram_rcw_2);
        ddr_out32(&ddr->ddr_cdr1, regs->ddr_cdr1);
-       ddr_out32(&ddr->ddr_cdr2, regs->ddr_cdr2);
+#ifdef CONFIG_DEEP_SLEEP
+       if (is_warm_boot()) {
+               ddr_out32(&ddr->sdram_cfg_2,
+                         regs->ddr_sdram_cfg_2 & ~SDRAM_CFG2_D_INIT);
+               ddr_out32(&ddr->init_addr, CONFIG_SYS_SDRAM_BASE);
+               ddr_out32(&ddr->init_ext_addr, DDR_INIT_ADDR_EXT_UIA);
+
+               /* DRAM VRef will not be trained */
+               ddr_out32(&ddr->ddr_cdr2,
+                         regs->ddr_cdr2 & ~DDR_CDR2_VREF_TRAIN_EN);
+       } else
+#endif
+       {
+               ddr_out32(&ddr->sdram_cfg_2, regs->ddr_sdram_cfg_2);
+               ddr_out32(&ddr->init_addr, regs->ddr_init_addr);
+               ddr_out32(&ddr->init_ext_addr, regs->ddr_init_ext_addr);
+               ddr_out32(&ddr->ddr_cdr2, regs->ddr_cdr2);
+       }
        ddr_out32(&ddr->err_disable, regs->err_disable);
        ddr_out32(&ddr->err_int_en, regs->err_int_en);
        for (i = 0; i < 32; i++) {
@@ -167,8 +180,20 @@ step2:
        udelay(500);
        asm volatile("dsb sy;isb");
 
+#ifdef CONFIG_DEEP_SLEEP
+       if (is_warm_boot()) {
+               /* enter self-refresh */
+               temp_sdram_cfg = ddr_in32(&ddr->sdram_cfg_2);
+               temp_sdram_cfg |= SDRAM_CFG2_FRC_SR;
+               ddr_out32(&ddr->sdram_cfg_2, temp_sdram_cfg);
+               /* do board specific memory setup */
+               board_mem_sleep_setup();
+
+               temp_sdram_cfg = (ddr_in32(&ddr->sdram_cfg) | SDRAM_CFG_BI);
+       } else
+#endif
+               temp_sdram_cfg = ddr_in32(&ddr->sdram_cfg) & ~SDRAM_CFG_BI;
        /* Let the controller go */
-       temp_sdram_cfg = ddr_in32(&ddr->sdram_cfg) & ~SDRAM_CFG_BI;
        ddr_out32(&ddr->sdram_cfg, temp_sdram_cfg | SDRAM_CFG_MEM_EN);
        asm volatile("dsb sy;isb");
 
@@ -211,4 +236,12 @@ step2:
 
        if (timeout <= 0)
                printf("Waiting for D_INIT timeout. Memory may not work.\n");
+#ifdef CONFIG_DEEP_SLEEP
+       if (is_warm_boot()) {
+               /* exit self-refresh */
+               temp_sdram_cfg = ddr_in32(&ddr->sdram_cfg_2);
+               temp_sdram_cfg &= ~SDRAM_CFG2_FRC_SR;
+               ddr_out32(&ddr->sdram_cfg_2, temp_sdram_cfg);
+       }
+#endif
 }
index e024db9ee2ab4ee0bf3cee26d221a1928c1090f2..a3c01e7f1e2ffa5e977a9d8c3b77c6d033467b44 100644 (file)
@@ -103,7 +103,6 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
        ddr_out32(&ddr->dq_map_1, regs->dq_map_1);
        ddr_out32(&ddr->dq_map_2, regs->dq_map_2);
        ddr_out32(&ddr->dq_map_3, regs->dq_map_3);
-       ddr_out32(&ddr->sdram_cfg_2, regs->ddr_sdram_cfg_2);
        ddr_out32(&ddr->sdram_cfg_3, regs->ddr_sdram_cfg_3);
        ddr_out32(&ddr->sdram_mode, regs->ddr_sdram_mode);
        ddr_out32(&ddr->sdram_mode_2, regs->ddr_sdram_mode_2);
@@ -124,8 +123,6 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
        ddr_out32(&ddr->sdram_md_cntl, regs->ddr_sdram_md_cntl);
        ddr_out32(&ddr->sdram_interval, regs->ddr_sdram_interval);
        ddr_out32(&ddr->sdram_data_init, regs->ddr_data_init);
-       ddr_out32(&ddr->init_addr, regs->ddr_init_addr);
-       ddr_out32(&ddr->init_ext_addr, regs->ddr_init_ext_addr);
        ddr_out32(&ddr->ddr_wrlvl_cntl, regs->ddr_wrlvl_cntl);
 #ifndef CONFIG_SYS_FSL_DDR_EMU
        /*
@@ -147,7 +144,24 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
        ddr_out32(&ddr->ddr_sdram_rcw_5, regs->ddr_sdram_rcw_5);
        ddr_out32(&ddr->ddr_sdram_rcw_6, regs->ddr_sdram_rcw_6);
        ddr_out32(&ddr->ddr_cdr1, regs->ddr_cdr1);
-       ddr_out32(&ddr->ddr_cdr2, regs->ddr_cdr2);
+#ifdef CONFIG_DEEP_SLEEP
+       if (is_warm_boot()) {
+               ddr_out32(&ddr->sdram_cfg_2,
+                         regs->ddr_sdram_cfg_2 & ~SDRAM_CFG2_D_INIT);
+               ddr_out32(&ddr->init_addr, CONFIG_SYS_SDRAM_BASE);
+               ddr_out32(&ddr->init_ext_addr, DDR_INIT_ADDR_EXT_UIA);
+
+               /* DRAM VRef will not be trained */
+               ddr_out32(&ddr->ddr_cdr2,
+                         regs->ddr_cdr2 & ~DDR_CDR2_VREF_TRAIN_EN);
+       } else
+#endif
+       {
+               ddr_out32(&ddr->sdram_cfg_2, regs->ddr_sdram_cfg_2);
+               ddr_out32(&ddr->init_addr, regs->ddr_init_addr);
+               ddr_out32(&ddr->init_ext_addr, regs->ddr_init_ext_addr);
+               ddr_out32(&ddr->ddr_cdr2, regs->ddr_cdr2);
+       }
        ddr_out32(&ddr->err_disable, regs->err_disable);
        ddr_out32(&ddr->err_int_en, regs->err_int_en);
        for (i = 0; i < 32; i++) {
@@ -187,8 +201,20 @@ step2:
        mb();
        isb();
 
+#ifdef CONFIG_DEEP_SLEEP
+       if (is_warm_boot()) {
+               /* enter self-refresh */
+               temp_sdram_cfg = ddr_in32(&ddr->sdram_cfg_2);
+               temp_sdram_cfg |= SDRAM_CFG2_FRC_SR;
+               ddr_out32(&ddr->sdram_cfg_2, temp_sdram_cfg);
+               /* do board specific memory setup */
+               board_mem_sleep_setup();
+
+               temp_sdram_cfg = (ddr_in32(&ddr->sdram_cfg) | SDRAM_CFG_BI);
+       } else
+#endif
+               temp_sdram_cfg = ddr_in32(&ddr->sdram_cfg) & ~SDRAM_CFG_BI;
        /* Let the controller go */
-       temp_sdram_cfg = ddr_in32(&ddr->sdram_cfg) & ~SDRAM_CFG_BI;
        ddr_out32(&ddr->sdram_cfg, temp_sdram_cfg | SDRAM_CFG_MEM_EN);
        mb();
        isb();
@@ -233,4 +259,12 @@ step2:
 
        if (timeout <= 0)
                printf("Waiting for D_INIT timeout. Memory may not work.\n");
+#ifdef CONFIG_DEEP_SLEEP
+       if (is_warm_boot()) {
+               /* exit self-refresh */
+               temp_sdram_cfg = ddr_in32(&ddr->sdram_cfg_2);
+               temp_sdram_cfg &= ~SDRAM_CFG2_FRC_SR;
+               ddr_out32(&ddr->sdram_cfg_2, temp_sdram_cfg);
+       }
+#endif
 }
index 4d5572ef21b65b0d68c3524bc8f48038b0a261cc..8f4d01ad856b22a269e0c6df363429e605cf7877 100644 (file)
@@ -15,8 +15,6 @@
 #error Invalid setting for CONFIG_CHIP_SELECTS_PER_CTRL
 #endif
 
-DECLARE_GLOBAL_DATA_PTR;
-
 /*
  * regs has the to-be-set values for DDR controller registers
  * ctrl_num is the DDR controller number
@@ -44,16 +42,6 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
        u32 save1, save2;
 #endif
 
-#ifdef CONFIG_DEEP_SLEEP
-       const ccsr_gur_t *gur = (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-       bool sleep_flag = 0;
-#endif
-
-#ifdef CONFIG_DEEP_SLEEP
-       if (in_be32(&gur->scrtsr[0]) & (1 << 3))
-               sleep_flag = 1;
-#endif
-
        switch (ctrl_num) {
        case 0:
                ddr = (void *)CONFIG_SYS_FSL_DDR_ADDR;
@@ -130,13 +118,6 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
        out_be32(&ddr->timing_cfg_0, regs->timing_cfg_0);
        out_be32(&ddr->timing_cfg_1, regs->timing_cfg_1);
        out_be32(&ddr->timing_cfg_2, regs->timing_cfg_2);
-#ifdef CONFIG_DEEP_SLEEP
-       if (sleep_flag)
-               out_be32(&ddr->sdram_cfg_2,
-                        regs->ddr_sdram_cfg_2 & ~SDRAM_CFG2_D_INIT);
-       else
-#endif
-               out_be32(&ddr->sdram_cfg_2, regs->ddr_sdram_cfg_2);
        out_be32(&ddr->sdram_mode, regs->ddr_sdram_mode);
        out_be32(&ddr->sdram_mode_2, regs->ddr_sdram_mode_2);
        out_be32(&ddr->sdram_mode_3, regs->ddr_sdram_mode_3);
@@ -149,17 +130,6 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
        out_be32(&ddr->sdram_interval, regs->ddr_sdram_interval);
        out_be32(&ddr->sdram_data_init, regs->ddr_data_init);
        out_be32(&ddr->sdram_clk_cntl, regs->ddr_sdram_clk_cntl);
-#ifdef CONFIG_DEEP_SLEEP
-       if (sleep_flag) {
-               out_be32(&ddr->init_addr, 0);
-               out_be32(&ddr->init_ext_addr, (1 << 31));
-       } else
-#endif
-       {
-               out_be32(&ddr->init_addr, regs->ddr_init_addr);
-               out_be32(&ddr->init_ext_addr, regs->ddr_init_ext_addr);
-       }
-
        out_be32(&ddr->timing_cfg_4, regs->timing_cfg_4);
        out_be32(&ddr->timing_cfg_5, regs->timing_cfg_5);
        out_be32(&ddr->ddr_zq_cntl, regs->ddr_zq_cntl);
@@ -180,7 +150,24 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
        out_be32(&ddr->ddr_sdram_rcw_1, regs->ddr_sdram_rcw_1);
        out_be32(&ddr->ddr_sdram_rcw_2, regs->ddr_sdram_rcw_2);
        out_be32(&ddr->ddr_cdr1, regs->ddr_cdr1);
-       out_be32(&ddr->ddr_cdr2, regs->ddr_cdr2);
+#ifdef CONFIG_DEEP_SLEEP
+       if (is_warm_boot()) {
+               out_be32(&ddr->sdram_cfg_2,
+                        regs->ddr_sdram_cfg_2 & ~SDRAM_CFG2_D_INIT);
+               out_be32(&ddr->init_addr, CONFIG_SYS_SDRAM_BASE);
+               out_be32(&ddr->init_ext_addr, DDR_INIT_ADDR_EXT_UIA);
+
+               /* DRAM VRef will not be trained */
+               out_be32(&ddr->ddr_cdr2,
+                        regs->ddr_cdr2 & ~DDR_CDR2_VREF_TRAIN_EN);
+       } else
+#endif
+       {
+               out_be32(&ddr->sdram_cfg_2, regs->ddr_sdram_cfg_2);
+               out_be32(&ddr->init_addr, regs->ddr_init_addr);
+               out_be32(&ddr->init_ext_addr, regs->ddr_init_ext_addr);
+               out_be32(&ddr->ddr_cdr2, regs->ddr_cdr2);
+       }
        out_be32(&ddr->err_disable, regs->err_disable);
        out_be32(&ddr->err_int_en, regs->err_int_en);
        for (i = 0; i < 32; i++) {
@@ -400,21 +387,17 @@ step2:
        asm volatile("sync;isync");
 
 #ifdef CONFIG_DEEP_SLEEP
-       if (sleep_flag) {
+       if (is_warm_boot()) {
                /* enter self-refresh */
-               setbits_be32(&ddr->sdram_cfg_2, (1 << 31));
+               setbits_be32(&ddr->sdram_cfg_2, SDRAM_CFG2_FRC_SR);
                /* do board specific memory setup */
                board_mem_sleep_setup();
-       }
-#endif
-
-       /* Let the controller go */
-#ifdef CONFIG_DEEP_SLEEP
-       if (sleep_flag)
                temp_sdram_cfg = (in_be32(&ddr->sdram_cfg) | SDRAM_CFG_BI);
-       else
+       else
 #endif
                temp_sdram_cfg = (in_be32(&ddr->sdram_cfg) & ~SDRAM_CFG_BI);
+
+       /* Let the controller go */
        out_be32(&ddr->sdram_cfg, temp_sdram_cfg | SDRAM_CFG_MEM_EN);
        asm volatile("sync;isync");
 
@@ -566,8 +549,8 @@ step2:
        }
 #endif /* CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134 */
 #ifdef CONFIG_DEEP_SLEEP
-       if (sleep_flag)
+       if (is_warm_boot())
                /* exit self-refresh */
-               clrbits_be32(&ddr->sdram_cfg_2, (1 << 31));
+               clrbits_be32(&ddr->sdram_cfg_2, SDRAM_CFG2_FRC_SR);
 #endif
 }
index 5b03c14c55db3f29741a4d7831c6093aa156b1c5..095b33e29ee75086217c443c9f40fef18191dc8e 100644 (file)
@@ -114,6 +114,7 @@ typedef struct ddr4_spd_eeprom_s generic_spd_eeprom_t;
 #define SDRAM_CFG_2T_EN                        0x00008000
 #define SDRAM_CFG_BI                   0x00000001
 
+#define SDRAM_CFG2_FRC_SR              0x80000000
 #define SDRAM_CFG2_D_INIT              0x00000010
 #define SDRAM_CFG2_ODT_CFG_MASK                0x00600000
 #define SDRAM_CFG2_ODT_NEVER           0
@@ -163,6 +164,7 @@ typedef struct ddr4_spd_eeprom_s generic_spd_eeprom_t;
 #define DDR_CDR1_ODT(x) ((x & DDR_CDR1_ODT_MASK) << DDR_CDR1_ODT_SHIFT)
 #define DDR_CDR2_ODT(x) (x & DDR_CDR2_ODT_MASK)
 #define DDR_CDR2_VREF_OVRD(x)  (0x00008080 | ((((x) - 37) & 0x3F) << 8))
+#define DDR_CDR2_VREF_TRAIN_EN 0x00000080
 
 #if (defined(CONFIG_SYS_FSL_DDR_VER) && \
        (CONFIG_SYS_FSL_DDR_VER >= FSL_DDR_VER_4_7))
@@ -202,6 +204,8 @@ typedef struct ddr4_spd_eeprom_s generic_spd_eeprom_t;
 #define DDR_CDR_ODT_120ohm     0x6
 #endif
 
+#define DDR_INIT_ADDR_EXT_UIA  (1 << 31)
+
 /* Record of register values computed */
 typedef struct fsl_ddr_cfg_regs_s {
        struct {
@@ -414,9 +418,11 @@ static int __board_need_mem_reset(void)
 int board_need_mem_reset(void)
        __attribute__((weak, alias("__board_need_mem_reset")));
 
-void __weak board_mem_sleep_setup(void)
-{
-}
+#if defined(CONFIG_DEEP_SLEEP)
+void board_mem_sleep_setup(void);
+bool is_warm_boot(void);
+int fsl_dp_resume(void);
+#endif
 
 /*
  * The 85xx boards have a common prototype for fixed_sdram so put the