Merge with ssh://fifi/home/wd/git/u-boot/master

diff --cc CHANGELOG
index b5ee677edd034cefefae422ce9112af051c4c9be,fa48cabbdec0e7c1ece1901d0fd6ed810a82b77a..27a654139fb149ab33c658cc1b6d18febe5cca20
--- 1/CHANGELOG
--- 2/CHANGELOG
+++ b/CHANGELOG
@@@ -2,12 -2,76 +2,82 @@@
  Changes since U-Boot 1.1.4:
  ======================================================================
  
+ * Add support for gth2 board
+   Patch by Thomas Lange, Aug 11 2005
+ 
+ * Add support for CONFIG_SERIAL_MULTI on MPC5xxx
+   Patch by Martin Krause, 8 Jun 2006
+ 
+   This patch supports two serial consoles on boards with
+   a MPC5xxx CPU. The console can be switched at runtime
+   by setting stdin, stdout and stderr to the desired serial
+   interface (serial0 or serial1). The PSCs to be used as
+   console port are definded by CONFIG_PSC_CONSOLE
+   and CONFIG_PSC_CONSOLE2.
+   See README.serial_multi for details.
+ 
+ * Bugfix in I2C initialisation on S3C2400.
+   If the bus is blocked because of a previously interrupted
+   transfer, up to eleven clocks are generated on the I2CSCL
+   line to complete the transfer and to free the bus.
+   With this fix pin I2CSCL (PG6) is really configured as GPIO
+   so the clock pulses are really generated.
+   Patch by Martin Krause, 04 Apr 2006
+   
+ * Fix DDR6 errata on TQM834x boards
+   Patch by Thomas Waehner, 07 Mar 2006
+ 
+ * Remove obsolete flash driver board/tqm5200/flash.c
+   Patch by Martin Krause, 11 Jan 2006
+ 
+ * Update configuration for CMC-PU2 board
+   Patch by Martin Krause, 17 Nov 2005
+ 
+ * Add support for PS/2 keyboard on TQM85xx board
+   Patch by Martin Krause, 07 Nov 2005
+ 
+   Tested on a STK85XX baseboard. Make sure the PS/2 controller
+   has been programmed. Jumper Settings: X66 1-2, 9-10; X61 2-3
+ 
+ * Fix TRAB channel switching delay for trab_fkt.bin standalone applikation
+   In tsc2000_read_channel() the delay after setting the multiplexer 
+   to a temperature channel is increased from 1,5 ms to 10 ms. This
+   is to allow the multiplexer inputs to stabilize after huge steps
+   of the input signal level.
+   Patch by Martin Krause, 08 Nov 2005
+ 
+ * Adjust TQM5200 make targets
+   Make the automatic CS configuration the default.
+   The dedicated configurations CONFIG_TQM5200_AA, CONFIG_TQM5200_AB
+   and CONFIG_TQM5200_AC are removed.
+   "TQM5200_config" is now the default for STK52XX.200 base boards.
+   On a STK52XX.100 base board "TQM5200_STK100_config" must be used.
+   Patch by Martin Krause, 07 Nov 2005
+ 
+ * Fix setting of environment variable "ver" on trab board
+   The environment variable "ver" is now set before
+   do_auto_update() is called, so that "ver" can be used
+   in USB update scripts.
+   Patch by Martin Krause, 27 Oct 2005
+ 
+ * Fix wrong usage of udelay() in led_blink() on trab board
+   Patch by Martin Krause, 27 Oct 2005
+ 
+ * Fix udelay bug in vfd.c for trab board
+   Patch by Martin Krause, 27 Oct 2005
+ 
+ * Disable JFFS2 support for trab board
+   Patch by Martin Krause, 27 Oct 2005
+ 
+ * Change mtdparts definition on trab board to match current flash map
+   Patch by Martin Krause, 27 Oct 2005
+ 
 +* Fix IxEthDB.h to compile again
 +  Patch by Stefan Roese, 14 Jun 2006
 +
 +* Minor cleanup for PCS440EP board
 +  Patch by Stefan Roese, 13 Jun 2006
 +
  * Add MCF5282 support (without preloader)
    relocate ichache_State to ram
    u-boot can run from internal flash