MIP405 \
MIP405T \
ML2 \
- ml300 \
ml507 \
ml507_flash \
neo \
ML2_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx ml2
-ml300_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx ml300 xilinx
-
ml507_flash_config: unconfig
@mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
@mkdir -p $(obj)include $(obj)board/xilinx/ml507
+++ /dev/null
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-ifneq ($(OBJTREE),$(SRCTREE))
-$(shell mkdir -p $(obj)../common)
-$(shell mkdir -p $(obj)../xilinx_enet)
-$(shell mkdir -p $(obj)../xilinx_iic)
-endif
-
-INCS := -I../common -I../xilinx_enet -I../xilinx_iic
-CFLAGS += $(INCS)
-HOSTCFLAGS += $(INCS)
-
-LIB = $(obj)lib$(BOARD).a
-
-COBJS = $(BOARD).o \
- serial.o \
- ../xilinx_enet/emac_adapter.o ../xilinx_enet/xemac.o \
- ../xilinx_enet/xemac_options.o ../xilinx_enet/xemac_polled.o \
- ../xilinx_enet/xemac_intr.o ../xilinx_enet/xemac_g.o \
- ../xilinx_enet/xemac_intr_dma.o ../xilinx_iic/iic_adapter.o \
- ../xilinx_iic/xiic_l.o ../common/xipif_v1_23_b.o \
- ../common/xbasic_types.o ../common/xdma_channel.o \
- ../common/xdma_channel_sg.o ../common/xpacket_fifo_v1_00_b.o \
- ../common/xversion.o \
-
-SOBJS = init.o
-
-SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS))
-SOBJS := $(addprefix $(obj),$(SOBJS))
-
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $^
-
-clean:
- rm -f $(SOBJS) $(OBJS)
-
-distclean: clean
- rm -f $(LIB) core *.bak $(obj).depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
+++ /dev/null
-#
-# (C) Copyright 2000
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#
-# esd ADCIOP boards
-#
-
-#TEXT_BASE = 0xFFFE0000
-TEXT_BASE = 0x04000000
-
-# Use board specific linker script
-LDSCRIPT := $(SRCTREE)/board/xilinx/ml300/u-boot.lds
+++ /dev/null
-/*
- * init.S: Stubs for U-Boot initialization
- *
- * Author: Xilinx, Inc.
- *
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- *
- * XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
- * COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
- * ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD,
- * XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE
- * FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING
- * ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
- * XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
- * THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY
- * WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM
- * CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND
- * FITNESS FOR A PARTICULAR PURPOSE.
- *
- *
- * Xilinx hardware products are not intended for use in life support
- * appliances, devices, or systems. Use in such applications is
- * expressly prohibited.
- *
- *
- * (c) Copyright 2002-2004 Xilinx Inc.
- * All rights reserved.
- *
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- *
- */
-
- .globl ext_bus_cntlr_init
-ext_bus_cntlr_init:
- blr
+++ /dev/null
-/*
- * ml300.c: U-Boot platform support for Xilinx ML300 board
- *
- * Author: Xilinx, Inc.
- *
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- *
- * XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
- * COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
- * ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD,
- * XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE
- * FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING
- * ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
- * XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
- * THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY
- * WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM
- * CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND
- * FITNESS FOR A PARTICULAR PURPOSE.
- *
- *
- * Xilinx hardware products are not intended for use in life support
- * appliances, devices, or systems. Use in such applications is
- * expressly prohibited.
- *
- *
- * (c) Copyright 2002-2004 Xilinx Inc.
- * All rights reserved.
- *
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#include <config.h>
-#include <common.h>
-#include <asm/processor.h>
-
-#ifdef CONFIG_ENV_IS_IN_EEPROM
-extern void convert_env(void);
-#endif
-
-int
-board_pre_init(void)
-{
- return 0;
-}
-
-int
-checkboard(void)
-{
- char tmp[64]; /* long enough for environment variables */
- char *s, *e;
- int i = getenv_r("L", tmp, sizeof (tmp));
-
- if (i < 0) {
- printf("### No HW ID - assuming ML300");
- } else {
- for (e = tmp; *e; ++e) {
- if (*e == ' ')
- break;
- }
-
- printf("### Board Serial# is ");
-
- for (s = tmp; s < e; ++s) {
- putc(*s);
- }
-
- }
- putc('\n');
-
- return (0);
-}
-
-phys_size_t
-initdram(int board_type)
-{
- return 128 * 1024 * 1024;
-}
-
-int
-testdram(void)
-{
- printf("test: xxx MB - ok\n");
-
- return (0);
-}
-
-/* implement functions originally in cpu/ppc4xx/speed.c */
-void
-get_sys_info(sys_info_t * sysInfo)
-{
- sysInfo->freqProcessor = XPAR_CORE_CLOCK_FREQ_HZ;
-
- /* only correct if the PLB and OPB run at the same frequency */
- sysInfo->freqPLB = XPAR_UARTNS550_0_CLOCK_FREQ_HZ;
- sysInfo->freqPCI = XPAR_UARTNS550_0_CLOCK_FREQ_HZ / 3;
-}
-
-ulong
-get_PCI_freq(void)
-{
- ulong val;
- PPC4xx_SYS_INFO sys_info;
-
- get_sys_info(&sys_info);
- val = sys_info.freqPCI;
- return val;
-}
-
-#ifdef CONFIG_MISC_INIT_R
-
-int
-misc_init_r()
-{
- /* convert env name and value to u-boot standard */
- convert_env();
- return 0;
-}
-
-#endif
+++ /dev/null
-/*
- * Author: Xilinx, Inc.
- *
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- *
- * XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
- * COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
- * ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD,
- * XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE
- * FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING
- * ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
- * XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
- * THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY
- * WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM
- * CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND
- * FITNESS FOR A PARTICULAR PURPOSE.
- *
- *
- * Xilinx hardware products are not intended for use in life support
- * appliances, devices, or systems. Use in such applications is
- * expressly prohibited.
- *
- *
- * (c) Copyright 2002-2004 Xilinx Inc.
- * All rights reserved.
- *
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#include <common.h>
-#include <asm/u-boot.h>
-#include <asm/processor.h>
-#include <command.h>
-#include <config.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define USE_CHAN1 \
- ((defined XPAR_UARTNS550_0_BASEADDR) && (defined CONFIG_SYS_INIT_CHAN1))
-#define USE_CHAN2 \
- ((defined XPAR_UARTNS550_1_BASEADDR) && (defined CONFIG_SYS_INIT_CHAN2))
-
-#if USE_CHAN1
-#include <ns16550.h>
-#endif
-
-#if USE_CHAN1
-const NS16550_t COM_PORTS[] = { (NS16550_t) (XPAR_UARTNS550_0_BASEADDR + 3)
-#if USE_CHAN2
- , (NS16550_t) (XPAR_UARTNS550_1_BASEADDR + 3)
-#endif
-};
-#endif
-
-int
-serial_init(void)
-{
-#if USE_CHAN1
- int clock_divisor;
-
- clock_divisor = XPAR_UARTNS550_0_CLOCK_FREQ_HZ / 16 / gd->baudrate;
- (void) NS16550_init(COM_PORTS[0], clock_divisor);
-#if USE_CHAN2
- clock_divisor = XPAR_UARTNS550_1_CLOCK_FREQ_HZ / 16 / gd->baudrate;
- (void) NS16550_init(COM_PORTS[1], clock_divisor);
-#endif
-#endif
- return 0;
-
-}
-
-void
-serial_putc(const char c)
-{
- if (c == '\n')
- NS16550_putc(COM_PORTS[CONFIG_SYS_DUART_CHAN], '\r');
-
- NS16550_putc(COM_PORTS[CONFIG_SYS_DUART_CHAN], c);
-}
-
-int
-serial_getc(void)
-{
- return NS16550_getc(COM_PORTS[CONFIG_SYS_DUART_CHAN]);
-}
-
-int
-serial_tstc(void)
-{
- return NS16550_tstc(COM_PORTS[CONFIG_SYS_DUART_CHAN]);
-}
-
-void
-serial_setbrg(void)
-{
-#if USE_CHAN1
- int clock_divisor;
-
- clock_divisor = XPAR_UARTNS550_0_CLOCK_FREQ_HZ / 16 / gd->baudrate;
- NS16550_reinit(COM_PORTS[0], clock_divisor);
-#if USE_CHAN2
- clock_divisor = XPAR_UARTNS550_1_CLOCK_FREQ_HZ / 16 / gd->baudrate;
- NS16550_reinit(COM_PORTS[1], clock_divisor);
-#endif
-#endif
-}
-
-void
-serial_puts(const char *s)
-{
- while (*s) {
- serial_putc(*s++);
- }
-}
-
-#if defined(CONFIG_CMD_KGDB)
-void
-kgdb_serial_init(void)
-{
-}
-
-void
-putDebugChar(int c)
-{
- serial_putc(c);
-}
-
-void
-putDebugStr(const char *str)
-{
- serial_puts(str);
-}
-
-int
-getDebugChar(void)
-{
- return serial_getc();
-}
-
-void
-kgdb_interruptible(int yes)
-{
- return;
-}
-#endif
+++ /dev/null
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-ENTRY(_start)
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
-SECTIONS
-{
- /* Read-only sections, merged into text segment: */
- . = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
- .text :
- {
- /* WARNING - the following is hand-optimized to fit within */
- /* the sector layout of our flash chips! XXX FIXME XXX */
-/*
- cpu/ppc4xx/start.o (.text)
- board/xilinx/ml300/init.o (.text)
- cpu/ppc4xx/kgdb.o (.text)
- cpu/ppc4xx/traps.o (.text)
- cpu/ppc4xx/interrupts.o (.text)
- cpu/ppc4xx/4xx_uart.o (.text)
- cpu/ppc4xx/cpu_init.o (.text)
- cpu/ppc4xx/speed.o (.text)
- drivers/net/4xx_enet.o (.text)
- common/dlmalloc.o (.text)
- lib_generic/crc32.o (.text)
- lib_ppc/extable.o (.text)
- lib_generic/zlib.o (.text)
-*/
-/* . = env_offset;*/
-/* common/env_embedded.o(.text)*/
-
- *(.text)
- *(.got1)
- }
- _etext = .;
- PROVIDE (etext = .);
- .rodata :
- {
- *(.eh_frame)
- *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
- }
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
-
- /* Read-write section, merged into data segment: */
- . = (. + 0x00FF) & 0xFFFFFF00;
- _erotext = .;
- PROVIDE (erotext = .);
- .reloc :
- {
- *(.got)
- _GOT2_TABLE_ = .;
- *(.got2)
- _FIXUP_TABLE_ = .;
- *(.fixup)
- }
- __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
- __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
- .data :
- {
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
- }
- _edata = .;
- PROVIDE (edata = .);
-
- . = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
-
-
- . = .;
- __start___ex_table = .;
- __ex_table : { *(__ex_table) }
- __stop___ex_table = .;
-
- . = ALIGN(256);
- __init_begin = .;
- .text.init : { *(.text.init) }
- .data.init : { *(.data.init) }
- . = ALIGN(256);
- __init_end = .;
-
- __bss_start = .;
- .bss (NOLOAD) :
- {
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
- *(COMMON)
- . = ALIGN(4);
- }
- _end = . ;
- PROVIDE (end = .);
-}
+++ /dev/null
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
-SECTIONS
-{
- /* Read-only sections, merged into text segment: */
- . = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
- .text :
- {
- /* WARNING - the following is hand-optimized to fit within */
- /* the sector layout of our flash chips! XXX FIXME XXX */
-
- mpc8xx/start.o (.text)
- common/dlmalloc.o (.text)
- lib_generic/vsprintf.o (.text)
- lib_generic/crc32.o (.text)
- lib_ppc/extable.o (.text)
-
- common/env_embedded.o(.text)
-
- *(.text)
- *(.got1)
- }
- _etext = .;
- PROVIDE (etext = .);
- .rodata :
- {
- *(.rodata)
- *(.rodata1)
- *(.rodata.str1.4)
- *(.eh_frame)
- }
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
-
- /* Read-write section, merged into data segment: */
- . = (. + 0x0FFF) & 0xFFFFF000;
- _erotext = .;
- PROVIDE (erotext = .);
- .reloc :
- {
- *(.got)
- _GOT2_TABLE_ = .;
- *(.got2)
- _FIXUP_TABLE_ = .;
- *(.fixup)
- }
- __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
- __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
- .data :
- {
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
- }
- _edata = .;
- PROVIDE (edata = .);
-
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
-
-
- __start___ex_table = .;
- __ex_table : { *(__ex_table) }
- __stop___ex_table = .;
-
- . = ALIGN(4096);
- __init_begin = .;
- .text.init : { *(.text.init) }
- .data.init : { *(.data.init) }
- . = ALIGN(4096);
- __init_end = .;
-
- __bss_start = .;
- .bss :
- {
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
- *(COMMON)
- }
- _end = . ;
- PROVIDE (end = .);
-}
+++ /dev/null
-/*******************************************************************
-*
-* CAUTION: This file is automatically generated by libgen.
-* Version: Xilinx EDK 6.2 EDK_Gm.11
-* DO NOT EDIT.
-*
-* Copyright (c) 2003 Xilinx, Inc. All rights reserved.
-*
-* Description: Driver parameters
-*
-*******************************************************************/
-
-/******************************************************************/
-
-/* U-Boot Redefines */
-
-/******************************************************************/
-
-#define XPAR_UARTNS550_0_BASEADDR (XPAR_OPB_UART16550_0_BASEADDR+0x1000)
-#define XPAR_UARTNS550_0_HIGHADDR XPAR_OPB_UART16550_0_HIGHADDR
-#define XPAR_UARTNS550_0_CLOCK_FREQ_HZ XPAR_XUARTNS550_CLOCK_HZ
-#define XPAR_UARTNS550_0_DEVICE_ID XPAR_OPB_UART16550_0_DEVICE_ID
-#define XPAR_UARTNS550_1_BASEADDR (XPAR_OPB_UART16550_1_BASEADDR+0x1000)
-#define XPAR_UARTNS550_1_HIGHADDR XPAR_OPB_UART16550_1_HIGHADDR
-#define XPAR_UARTNS550_1_CLOCK_FREQ_HZ XPAR_XUARTNS550_CLOCK_HZ
-#define XPAR_UARTNS550_1_DEVICE_ID XPAR_OPB_UART16550_1_DEVICE_ID
-
-/******************************************************************/
-
-#define XPAR_IIC_0_BASEADDR XPAR_OPB_IIC_0_BASEADDR
-#define XPAR_IIC_0_HIGHADDR XPAR_OPB_IIC_0_HIGHADDR
-#define XPAR_IIC_0_TEN_BIT_ADR XPAR_OPB_IIC_0_TEN_BIT_ADR
-#define XPAR_IIC_0_DEVICE_ID XPAR_OPB_IIC_0_DEVICE_ID
-
-/******************************************************************/
-
-#define XPAR_EMAC_0_BASEADDR XPAR_OPB_ETHERNET_0_BASEADDR
-#define XPAR_EMAC_0_HIGHADDR XPAR_OPB_ETHERNET_0_HIGHADDR
-#define XPAR_EMAC_0_DMA_PRESENT XPAR_OPB_ETHERNET_0_DMA_PRESENT
-#define XPAR_EMAC_0_MII_EXIST XPAR_OPB_ETHERNET_0_MII_EXIST
-#define XPAR_EMAC_0_ERR_COUNT_EXIST XPAR_OPB_ETHERNET_0_ERR_COUNT_EXIST
-#define XPAR_EMAC_0_DEVICE_ID XPAR_OPB_ETHERNET_0_DEVICE_ID
-
-/******************************************************************/
-
-#define XPAR_CORE_CLOCK_FREQ_HZ XPAR_CPU_PPC405_CORE_CLOCK_FREQ_HZ
-
-/******************************************************************/
-
-#define XPAR_PERSISTENT_0_IIC_0_BASEADDR 0x00000400
-#define XPAR_PERSISTENT_0_IIC_0_HIGHADDR 0x000007FF
-#define XPAR_PERSISTENT_0_IIC_0_EEPROMADDR 0xA0
-
-/******************************************************************/
-
-#define XPAR_XPCI_NUM_INSTANCES 1
-#define XPAR_XPCI_CLOCK_HZ 33333333
-#define XPAR_OPB_PCI_REF_0_DEVICE_ID 0
-#define XPAR_OPB_PCI_REF_0_BASEADDR 0x20000000
-#define XPAR_OPB_PCI_REF_0_HIGHADDR 0x3FFFFFFF
-#define XPAR_OPB_PCI_REF_0_CONFIG_ADDR 0x3C000000
-#define XPAR_OPB_PCI_REF_0_CONFIG_DATA 0x3C000004
-#define XPAR_OPB_PCI_REF_0_LCONFIG_ADDR 0x3E000000
-#define XPAR_OPB_PCI_REF_0_MEM_BASEADDR 0x20000000
-#define XPAR_OPB_PCI_REF_0_MEM_HIGHADDR 0x37FFFFFF
-#define XPAR_OPB_PCI_REF_0_IO_BASEADDR 0x38000000
-#define XPAR_OPB_PCI_REF_0_IO_HIGHADDR 0x3BFFFFFF
-
-/******************************************************************/
-
-#define XPAR_XEMAC_NUM_INSTANCES 1
-#define XPAR_OPB_ETHERNET_0_BASEADDR 0x60000000
-#define XPAR_OPB_ETHERNET_0_HIGHADDR 0x60003FFF
-#define XPAR_OPB_ETHERNET_0_DEVICE_ID 0
-#define XPAR_OPB_ETHERNET_0_ERR_COUNT_EXIST 1
-#define XPAR_OPB_ETHERNET_0_DMA_PRESENT 1
-#define XPAR_OPB_ETHERNET_0_MII_EXIST 1
-
-/******************************************************************/
-
-#define XPAR_MY_OPB_GPIO_0_DEVICE_ID_0 0
-#define XPAR_MY_OPB_GPIO_0_BASEADDR_0 0x90000000
-#define XPAR_MY_OPB_GPIO_0_HIGHADDR_0 (0x90000000+0x7)
-#define XPAR_MY_OPB_GPIO_0_DEVICE_ID_1 1
-#define XPAR_MY_OPB_GPIO_0_BASEADDR_1 (0x90000000+0x8)
-#define XPAR_MY_OPB_GPIO_0_HIGHADDR_1 (0x90000000+0x1F)
-#define XPAR_XGPIO_NUM_INSTANCES 2
-
-/******************************************************************/
-
-#define XPAR_XIIC_NUM_INSTANCES 1
-#define XPAR_OPB_IIC_0_BASEADDR 0xA8000000
-#define XPAR_OPB_IIC_0_HIGHADDR 0xA80001FF
-#define XPAR_OPB_IIC_0_DEVICE_ID 0
-#define XPAR_OPB_IIC_0_TEN_BIT_ADR 0
-
-/******************************************************************/
-
-#define XPAR_XUARTNS550_NUM_INSTANCES 2
-#define XPAR_XUARTNS550_CLOCK_HZ 100000000
-#define XPAR_OPB_UART16550_0_BASEADDR 0xA0000000
-#define XPAR_OPB_UART16550_0_HIGHADDR 0xA0001FFF
-#define XPAR_OPB_UART16550_0_DEVICE_ID 0
-#define XPAR_OPB_UART16550_1_BASEADDR 0xA0010000
-#define XPAR_OPB_UART16550_1_HIGHADDR 0xA0011FFF
-#define XPAR_OPB_UART16550_1_DEVICE_ID 1
-
-/******************************************************************/
-
-#define XPAR_XSPI_NUM_INSTANCES 1
-#define XPAR_OPB_SPI_0_BASEADDR 0xA4000000
-#define XPAR_OPB_SPI_0_HIGHADDR 0xA400007F
-#define XPAR_OPB_SPI_0_DEVICE_ID 0
-#define XPAR_OPB_SPI_0_FIFO_EXIST 1
-#define XPAR_OPB_SPI_0_SPI_SLAVE_ONLY 0
-#define XPAR_OPB_SPI_0_NUM_SS_BITS 1
-
-/******************************************************************/
-
-#define XPAR_XPS2_NUM_INSTANCES 2
-#define XPAR_OPB_PS2_DUAL_REF_0_DEVICE_ID_0 0
-#define XPAR_OPB_PS2_DUAL_REF_0_BASEADDR_0 0xA9000000
-#define XPAR_OPB_PS2_DUAL_REF_0_HIGHADDR_0 (0xA9000000+0x3F)
-#define XPAR_OPB_PS2_DUAL_REF_0_DEVICE_ID_1 1
-#define XPAR_OPB_PS2_DUAL_REF_0_BASEADDR_1 (0xA9000000+0x1000)
-#define XPAR_OPB_PS2_DUAL_REF_0_HIGHADDR_1 (0xA9000000+0x103F)
-
-/******************************************************************/
-
-#define XPAR_XTOUCHSCREEN_NUM_INSTANCES 1
-#define XPAR_OPB_TSD_REF_0_BASEADDR 0xAA000000
-#define XPAR_OPB_TSD_REF_0_HIGHADDR 0xAA000007
-#define XPAR_OPB_TSD_REF_0_DEVICE_ID 0
-
-/******************************************************************/
-
-#define XPAR_OPB_AC97_CONTROLLER_REF_0_BASEADDR 0xA6000000
-#define XPAR_OPB_AC97_CONTROLLER_REF_0_HIGHADDR 0xA60000FF
-#define XPAR_OPB_PAR_PORT_REF_0_BASEADDR 0x90010000
-#define XPAR_OPB_PAR_PORT_REF_0_HIGHADDR 0x900100FF
-#define XPAR_PLB_DDR_0_BASEADDR 0x00000000
-#define XPAR_PLB_DDR_0_HIGHADDR 0x0FFFFFFF
-
-/******************************************************************/
-
-#define XPAR_XINTC_HAS_IPR 1
-#define XPAR_INTC_MAX_NUM_INTR_INPUTS 18
-#define XPAR_XINTC_USE_DCR 0
-#define XPAR_XINTC_NUM_INSTANCES 1
-#define XPAR_DCR_INTC_0_BASEADDR 0xD0000FC0
-#define XPAR_DCR_INTC_0_HIGHADDR 0xD0000FDF
-#define XPAR_DCR_INTC_0_DEVICE_ID 0
-#define XPAR_DCR_INTC_0_KIND_OF_INTR 0x00038000
-
-/******************************************************************/
-
-#define XPAR_DCR_INTC_0_MISC_LOGIC_0_PHY_MII_INT_INTR 0
-#define XPAR_DCR_INTC_0_OPB_ETHERNET_0_IP2INTC_IRPT_INTR 1
-#define XPAR_DCR_INTC_0_MISC_LOGIC_0_IIC_TEMP_CRIT_INTR 2
-#define XPAR_DCR_INTC_0_MISC_LOGIC_0_IIC_IRQ_INTR 3
-#define XPAR_DCR_INTC_0_OPB_IIC_0_IP2INTC_IRPT_INTR 4
-#define XPAR_DCR_INTC_0_OPB_SYSACE_0_SYSACE_IRQ_INTR 5
-#define XPAR_DCR_INTC_0_OPB_UART16550_0_IP2INTC_IRPT_INTR 6
-#define XPAR_DCR_INTC_0_OPB_UART16550_1_IP2INTC_IRPT_INTR 7
-#define XPAR_DCR_INTC_0_OPB_PS2_DUAL_REF_0_SYS_INTR1_INTR 8
-#define XPAR_DCR_INTC_0_OPB_PS2_DUAL_REF_0_SYS_INTR2_INTR 9
-#define XPAR_DCR_INTC_0_OPB_SPI_0_IP2INTC_IRPT_INTR 10
-#define XPAR_DCR_INTC_0_OPB_TSD_REF_0_INTR_INTR 11
-#define XPAR_DCR_INTC_0_OPB_AC97_CONTROLLER_REF_0_PLAYBACK_INTERRUPT_INTR 12
-#define XPAR_DCR_INTC_0_OPB_AC97_CONTROLLER_REF_0_RECORD_INTERRUPT_INTR 13
-#define XPAR_DCR_INTC_0_OPB_PCI_REF_0_INTR_OUT_INTR 14
-#define XPAR_DCR_INTC_0_PLB2OPB_BRIDGE_0_BUS_ERROR_DET_INTR 15
-#define XPAR_DCR_INTC_0_PLB_V34_0_BUS_ERROR_DET_INTR 16
-#define XPAR_DCR_INTC_0_OPB2PLB_BRIDGE_0_BUS_ERROR_DET_INTR 17
-
-/******************************************************************/
-
-#define XPAR_XTFT_NUM_INSTANCES 1
-#define XPAR_PLB_TFT_CNTLR_REF_0_DCR_BASEADDR 0xD0000200
-#define XPAR_PLB_TFT_CNTLR_REF_0_DCR_HIGHADDR 0xD0000207
-#define XPAR_PLB_TFT_CNTLR_REF_0_DEVICE_ID 0
-
-/******************************************************************/
-
-#define XPAR_XSYSACE_MEM_WIDTH 8
-#define XPAR_XSYSACE_NUM_INSTANCES 1
-#define XPAR_OPB_SYSACE_0_BASEADDR 0xCF000000
-#define XPAR_OPB_SYSACE_0_HIGHADDR 0xCF0001FF
-#define XPAR_OPB_SYSACE_0_DEVICE_ID 0
-#define XPAR_OPB_SYSACE_0_MEM_WIDTH 8
-
-/******************************************************************/
-
-#define XPAR_CPU_PPC405_CORE_CLOCK_FREQ_HZ 300000000
-
-/******************************************************************/
+++ /dev/null
-/******************************************************************************
-*
-* Author: Xilinx, Inc.
-*
-*
-* This program is free software; you can redistribute it and/or modify it
-* under the terms of the GNU General Public License as published by the
-* Free Software Foundation; either version 2 of the License, or (at your
-* option) any later version.
-*
-*
-* XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
-* COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
-* ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD,
-* XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE
-* FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING
-* ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
-* XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
-* THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY
-* WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM
-* CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND
-* FITNESS FOR A PARTICULAR PURPOSE.
-*
-*
-* Xilinx hardware products are not intended for use in life support
-* appliances, devices, or systems. Use in such applications is
-* expressly prohibited.
-*
-*
-* (c) Copyright 2002-2004 Xilinx Inc.
-* All rights reserved.
-*
-*
-* You should have received a copy of the GNU General Public License along
-* with this program; if not, write to the Free Software Foundation, Inc.,
-* 675 Mass Ave, Cambridge, MA 02139, USA.
-*
-******************************************************************************/
-
-#include <config.h>
-#include <common.h>
-#include <environment.h>
-#include <net.h>
-
-#ifdef CONFIG_ENV_IS_IN_EEPROM
-#include <i2c.h>
-#include "xiic_l.h"
-
-#define IIC_DELAY 5000
-
-static u8 envStep = 0; /* 0 means crc has not been read */
-const u8 hex[] = "0123456789ABCDEF"; /* lookup table for ML300 CRC */
-
-/************************************************************************
- * Use Xilinx provided driver to send data to EEPROM using iic bus.
- */
-static void
-send(u32 adr, u8 * data, u32 len)
-{
- u8 sendBuf[34]; /* first 2-bit is address and others are data */
- u32 pos, wlen;
- u32 ret;
-
- wlen = 32;
- for (pos = 0; pos < len; pos += 32) {
- if ((len - pos) < 32)
- wlen = len - pos;
-
- /* Put address and data bits together */
- sendBuf[0] = (u8) ((adr + pos) >> 8);
- sendBuf[1] = (u8) (adr + pos);
- memcpy(&sendBuf[2], &data[pos], wlen);
-
- /* Send to EEPROM through iic bus */
- ret = XIic_Send(XPAR_IIC_0_BASEADDR, CONFIG_SYS_I2C_EEPROM_ADDR >> 1,
- sendBuf, wlen + 2);
-
- udelay(IIC_DELAY);
- }
-}
-
-/************************************************************************
- * Use Xilinx provided driver to read data from EEPROM using the iic bus.
- */
-static void
-receive(u32 adr, u8 * data, u32 len)
-{
- u8 address[2];
- u32 ret;
-
- address[0] = (u8) (adr >> 8);
- address[1] = (u8) adr;
-
- /* Provide EEPROM address */
- ret =
- XIic_Send(XPAR_IIC_0_BASEADDR, CONFIG_SYS_I2C_EEPROM_ADDR >> 1, address,
- 2);
- /* Receive data from EEPROM */
- ret =
- XIic_Recv(XPAR_IIC_0_BASEADDR, CONFIG_SYS_I2C_EEPROM_ADDR >> 1, data, len);
-}
-
-/************************************************************************
- * Convert a hexadecimal string to its equivalent integer value.
- */
-static u8
-axtoi(u8 * hexStg)
-{
- u8 n; /* position in string */
- u8 m; /* position in digit[] to shift */
- u8 count; /* loop index */
- u8 intValue; /* integer value of hex string */
- u8 digit[2]; /* hold values to convert */
-
- for (n = 0; n < 2; n++) {
- if (hexStg[n] == '\0')
- break;
- if (hexStg[n] > 0x29 && hexStg[n] < 0x40)
- digit[n] = hexStg[n] & 0x0f;
- else if (hexStg[n] >= 'a' && hexStg[n] <= 'f')
- digit[n] = (hexStg[n] & 0x0f) + 9;
- else if (hexStg[n] >= 'A' && hexStg[n] <= 'F')
- digit[n] = (hexStg[n] & 0x0f) + 9;
- else
- break;
- }
-
- intValue = 0;
- count = n;
- m = n - 1;
- n = 0;
- while (n < count) {
- intValue = intValue | (digit[n] << (m << 2));
- m--; /* adjust the position to set */
- n++; /* next digit to process */
- }
-
- return (intValue);
-}
-
-/************************************************************************
- * Convert an integer string to its equivalent value.
- */
-static u8
-atoi(uchar * string)
-{
- u8 res = 0;
- while (*string >= '0' && *string <= '9') {
- res *= 10;
- res += *string - '0';
- string++;
- }
-
- return res;
-}
-
-/************************************************************************
- * Key-value pairs are separated by "=" sign.
- */
-static void
-findKey(uchar * buffer, int *loc, u8 len)
-{
- u32 i;
-
- for (i = 0; i < len; i++)
- if (buffer[i] == '=') {
- *loc = i;
- return;
- }
-
- /* return -1 is no "=" sign found */
- *loc = -1;
-}
-
-/************************************************************************
- * Compute a new ML300 CRC when user calls the saveenv command.
- * Also update EEPROM with new CRC value.
- */
-static u8
-update_crc(u32 len, uchar * data)
-{
- uchar temp[6] = { 'C', '=', 0x00, 0x00, 0x00, 0x00 };
- u32 crc; /* new crc value */
- u32 i;
-
- crc = 0;
-
- /* calculate new CRC */
- for (i = 0; i < len; i++)
- crc += data[i];
-
- /* CRC includes key for check sum */
- crc += 'C' + '=';
-
- /* compose new CRC to be updated */
- temp[2] = hex[(crc >> 4) & 0xf];
- temp[3] = hex[crc & 0xf];
-
- /* check to see if env size exceeded */
- if (len + 6 > ENV_SIZE) {
- printf("ERROR: not enough space to store CRC on EEPROM");
- return 1;
- }
-
- memcpy(data + len, temp, 6);
- return 0;
-}
-
-/************************************************************************
- * Read out ML300 CRC and compare it with a runtime calculated ML300 CRC.
- * If equal, then pass back a u-boot CRC value, otherwise pass back
- * junk to indicate CRC error.
-*/
-static void
-read_crc(uchar * buffer, int len)
-{
- u32 addr, n;
- u32 crc; /* runtime crc */
- u8 old[2] = { 0xff, 0xff }; /* current CRC in EEPROM */
- u8 stop; /* indication of end of env data */
- u8 pre; /* previous EEPROM data bit */
- int i, loc;
-
- addr = CONFIG_ENV_OFFSET; /* start from first env address */
- n = 0;
- pre = 1;
- stop = 1;
- crc = 0;
-
- /* calculate runtime CRC according to ML300 and read back
- old CRC stored in the EEPROM */
- while (n < CONFIG_ENV_SIZE) {
- receive(addr, buffer, len);
-
- /* found two null chars, end of env */
- if ((pre || buffer[0]) == 0)
- break;
-
- findKey(buffer, &loc, len);
-
- /* found old check sum, read and store old CRC */
- if ((loc == 0 && pre == 'C')
- || (loc > 0 && buffer[loc - 1] == 'C'))
- receive(addr + loc + 1, old, 2);
-
- pre = buffer[len - 1];
-
- /* calculate runtime ML300 CRC */
- crc += buffer[0];
- i = 1;
- do {
- crc += buffer[i];
- stop = buffer[i] || buffer[i - 1];
- i++;
- } while (stop && (i < len));
-
- if (stop == 0)
- break;
-
- n += len;
- addr += len;
- }
-
- /* exclude old CRC from runtime calculation */
- crc -= (old[0] + old[1]);
-
- /* match CRC values, send back u-boot CRC */
- if ((old[0] == hex[(crc >> 4) & 0xf])
- && (old[1] == hex[crc & 0xf])) {
- crc = 0;
- n = 0;
- addr =
- CONFIG_ENV_OFFSET - offsetof(env_t, crc) + offsetof(env_t,
- data);
- /* calculate u-boot crc */
- while (n < ENV_SIZE) {
- receive(addr, buffer, len);
- crc = crc32(crc, buffer, len);
- n += len;
- addr += len;
- }
-
- memcpy(buffer, &crc, 4);
- }
-}
-
-/************************************************************************
- * Convert IP address to hexadecimals.
- */
-static void
-ip_ml300(uchar * s, uchar * res)
-{
- char temp[2];
- u8 i;
-
- res[0] = 0x00;
-
- for (i = 0; i < 4; i++) {
- sprintf(temp, "%02x", atoi(s));
- s = (uchar *)strchr((char *)s, '.') + 1;
- strcat((char *)res, temp);
- }
-}
-
-/************************************************************************
- * Change 0xff (255), a dummy null char to 0x00.
- */
-static void
-change_null(uchar * s)
-{
- if (s != NULL) {
- change_null((uchar *)strchr((char *)s + 1, 255));
- *(strchr((char *)s, 255)) = '\0';
- }
-}
-
-/************************************************************************
- * Update environment variable name and values to u-boot standard.
- */
-void
-convert_env(void)
-{
- char *s; /* pointer to env value */
- char temp[20]; /* temp storage for addresses */
-
- /* E -> ethaddr */
- s = getenv("E");
- if (s != NULL) {
- sprintf(temp, "%c%c.%c%c.%c%c.%c%c.%c%c.%c%c",
- s[0], s[1], s[ 2], s[ 3],
- s[4], s[5], s[ 6], s[ 7],
- s[8], s[9], s[10], s[11] );
- setenv("ethaddr", temp);
- setenv("E", NULL);
- }
-
- /* L -> serial# */
- s = getenv("L");
- if (s != NULL) {
- setenv("serial#", s);
- setenv("L", NULL);
- }
-
- /* I -> ipaddr */
- s = getenv("I");
- if (s != NULL) {
- sprintf(temp, "%d.%d.%d.%d", axtoi((u8 *)s), axtoi((u8 *)(s + 2)),
- axtoi((u8 *)(s + 4)), axtoi((u8 *)(s + 6)));
- setenv("ipaddr", temp);
- setenv("I", NULL);
- }
-
- /* S -> serverip */
- s = getenv("S");
- if (s != NULL) {
- sprintf(temp, "%d.%d.%d.%d", axtoi((u8 *)s), axtoi((u8 *)(s + 2)),
- axtoi((u8 *)(s + 4)), axtoi((u8 *)(s + 6)));
- setenv("serverip", temp);
- setenv("S", NULL);
- }
-
- /* A -> bootargs */
- s = getenv("A");
- if (s != NULL) {
- setenv("bootargs", s);
- setenv("A", NULL);
- }
-
- /* F -> bootfile */
- s = getenv("F");
- if (s != NULL) {
- setenv("bootfile", s);
- setenv("F", NULL);
- }
-
- /* M -> bootcmd */
- s = getenv("M");
- if (s != NULL) {
- setenv("bootcmd", s);
- setenv("M", NULL);
- }
-
- /* Don't include C (CRC) */
- setenv("C", NULL);
-}
-
-/************************************************************************
- * Save user modified environment values back to EEPROM.
- */
-static void
-save_env(void)
-{
- char eprom[ENV_SIZE]; /* buffer to be written back to EEPROM */
- char *s, temp[20];
- char ff[] = { 0xff, 0x00 }; /* dummy null value */
- u32 len; /* length of env to be written to EEPROM */
-
- eprom[0] = 0x00;
-
- /* ethaddr -> E */
- s = getenv("ethaddr");
- if (s != NULL) {
- strcat(eprom, "E=");
- sprintf(temp, "%c%c%c%c%c%c%c%c%c%c%c%c",
- *s, *(s + 1), *(s + 3), *(s + 4), *(s + 6), *(s + 7),
- *(s + 9), *(s + 10), *(s + 12), *(s + 13), *(s + 15),
- *(s + 16));
- strcat(eprom, temp);
- strcat(eprom, ff);
- }
-
- /* serial# -> L */
- s = getenv("serial#");
- if (s != NULL) {
- strcat(eprom, "L=");
- strcat(eprom, s);
- strcat(eprom, ff);
- }
-
- /* ipaddr -> I */
- s = getenv("ipaddr");
- if (s != NULL) {
- strcat(eprom, "I=");
- ip_ml300((uchar *)s, (uchar *)temp);
- strcat(eprom, temp);
- strcat(eprom, ff);
- }
-
- /* serverip -> S */
- s = getenv("serverip");
- if (s != NULL) {
- strcat(eprom, "S=");
- ip_ml300((uchar *)s, (uchar *)temp);
- strcat(eprom, temp);
- strcat(eprom, ff);
- }
-
- /* bootargs -> A */
- s = getenv("bootargs");
- if (s != NULL) {
- strcat(eprom, "A=");
- strcat(eprom, s);
- strcat(eprom, ff);
- }
-
- /* bootfile -> F */
- s = getenv("bootfile");
- if (s != NULL) {
- strcat(eprom, "F=");
- strcat(eprom, s);
- strcat(eprom, ff);
- }
-
- /* bootcmd -> M */
- s = getenv("bootcmd");
- if (s != NULL) {
- strcat(eprom, "M=");
- strcat(eprom, s);
- strcat(eprom, ff);
- }
-
- len = strlen(eprom); /* find env length without crc */
- change_null((uchar *)eprom); /* change 0xff to 0x00 */
-
- /* update EEPROM env values if there is enough space */
- if (update_crc(len, (uchar *)eprom) == 0)
- send(CONFIG_ENV_OFFSET, (uchar *)eprom, len + 6);
-}
-
-/************************************************************************
- * U-boot call for EEPROM read associated activities.
- */
-int
-i2c_read(uchar chip, uint addr, int alen, uchar * buffer, int len)
-{
-
- if (envStep == 0) {
- /* first read call is for crc */
- read_crc(buffer, len);
- ++envStep;
- return 0;
- } else if (envStep == 1) {
- /* then read out EEPROM content for runtime u-boot CRC calculation */
- receive(addr, buffer, len);
-
- if (addr + len - CONFIG_ENV_OFFSET == CONFIG_ENV_SIZE)
- /* end of runtime crc read */
- ++envStep;
- return 0;
- }
-
- if (len < 2) {
- /* when call getenv_r */
- receive(addr, buffer, len);
- } else if (addr + len < CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) {
- /* calling env_relocate(), but don't read out
- crc value from EEPROM */
- receive(addr, buffer + 4, len);
- } else {
- receive(addr, buffer + 4, len - 4);
- }
-
- return 0;
-
-}
-
-/************************************************************************
- * U-boot call for EEPROM write acativities.
- */
-int
-i2c_write(uchar chip, uint addr, int alen, uchar * buffer, int len)
-{
- /* save env on last page write called by u-boot */
- if (addr + len >= CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
- save_env();
-
- return 0;
-}
-
-/************************************************************************
- * Dummy function.
- */
-int
-i2c_probe(uchar chip)
-{
- return 1;
-}
-
-#endif
+++ /dev/null
-Xilinx ML300 platform
-=====================
-
-0. Introduction
----------------
-
-The Xilinx ML300 board is based on the Virtex-II Pro FPGA with
-integrated AMCC PowerPC 405 core. The board is normally booted from
-System ACE CF. U-Boot is then run out of main memory.
-
-An FPGA is a configurable and thus very flexible device. To
-accommodate for this flexibility this port of U-Boot includes the
-required means to regenerate the drivers and configuration files if
-you decide to change the hardware design. The required steps are
-described below.
-
-
-1. Requirements
----------------
-
-To compile and run U-Boot on the Xilinx ML300 platform you need the
-following items.
-
-- A Xilinx ML300 platform (see http://www.xilinx.com/ml300)
-- EDK and ISE development tools (shipping with ML300)
-- Parallel4 cable (shipping with ML300)
-- The EDK reference design for ML300. You can get this as design #6 from
- http://www.xilinx.com/ise/embedded/edk_examples.htm
-- A BOOTP/TFTP server
-
-
-2. Quick Start
---------------
-
-To compile and run U-Boot on ML300 follow the steps below. Make sure
-to consult the documentation for U-Boot, EDK, and the EDK reference
-design for ML300 if you have any questions.
-
-1. Implement the EDK reference design for ML300. You can use any of
- the project files, for example from a xygwin shell:
- $ xps -nw system_linux.xmp
- XPS% run init_bram
-2. Configure and compile U-Boot. Change into the root directory of
- U-Boot and run:
- $ export CROSS_COMPILE=powerpc-eabi-
- $ make ml300_config
- $ make
-3. Set up the ML300, connect the Parallel4 and the serial cable. Start
- a terminal on your host computer and set the communication
- parameters to 9600,8N1,no handshake.
-4. Set up the BOOTP/TFTP server on your host machine. U-Boot is
- preconfigured to use a fixed HW MAC address of 00:0A:35:00:22:01.
-5. Download the bitstream to the ML300.
-6. Use XMD to download and run U-Boot on the ML300:
- $ xmd
- XMD% ppcconnect
- XMD% dow u-boot
- XMD% run
-
-You can now make an ACE file out of bitstream and U-Boot:
- $ xmd genace.tcl -jprog -board ml300 -hw \
- implementation/download.bit -elf u-boot -ace top.ace
-
-Put the ACE file onto the MicroDrive, for example into xilinx/myace,
-and reboot ML300.
-
-
-3. Generating a Custom BSP for U-Boot
--------------------------------------
-
-If you decide to change the EDK reference design for ML300 or if you
-build a new design from scratch either with the Base System Builder in
-XPS or all by hand you most likely will change the base addresses for
-the Uart and the Ethernet peripheral. If you do so you will have two
-options:
-
-1. Edit boards/xilinx/ml300/xparameters.h to reflect the changes you
- made to your hardware.
-2. Use the MLD technology provided by Xilinx Platform Studio to make
- the changes automatically. To do so go to the root directory of the
- EDK reference design for ML300. Copy the Linux project file and the
- Linux software configuration file:
- $ cp system_linux.xmp system_uboot.xmp
- $ cp system_linux.mss system_uboot.mss
-
- Edit system_uboot.xmp and and have it point to system_uboot.mss for
- the software configuration.
-
- Then, copy the sw_services directory in
- boards/xilinx/ml300/sw_services to the root directory of the EDK
- reference design for ML300.
- $ cp -R <uboot dir>/boards/xilinx/ml300/sw_services <edk dir>
-
- Modify system_uboot.mss. Look for the Linux library definition
- and change it to generate a BSP for U-Boot. An example, might look
- like this:
-
- BEGIN LIBRARY
- PARAMETER LIBRARY_NAME = uboot
- PARAMETER LIBRARY_VER = 1.00.a
- PARAMETER CONNECTED_PERIPHS = (opb_uart16550_0,opb_ethernet_0)
- PARAMETER TARGET_DIR = <uboot dir>
- END
-
- Now, you are ready to generate the Xilinx ML300 BSP for U-Boot:
- $ xps -nw system_uboot.xmp
- XPS% run libs
-
- If all goes well the new configuration has been copied into the
- right places within the U-Boot source tree. Recompile U-Boot and
- run it on the ML300.
-
-
-4. ToDo
--------
-
-- Add support for all other peripherals on ML300.
-- Read the MAC address out of the IIC EEPROM.
-- Store the bootargs in the IIC EEPROM.
-
-
-5. References
--------------
-
-ML300: http://www.xilinx.com/ml300
-EDK: http://www.xilinx.com/edk
-ISE: http://www.xilinx.com/ise
-Reference Design: http://www.xilinx.com/ise/embedded/edk_examples.htm
+++ /dev/null
-/*
- * ML300.h: ML300 specific config options
- *
- * http://www.xilinx.com/ml300
- *
- * Derived from : ML2.h
- *
- * Author: Xilinx, Inc.
- *
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- *
- * XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
- * COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
- * ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD,
- * XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE
- * FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR
- * OBTAINING ANY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
- * XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
- * THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY
- * WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM
- * CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND
- * FITNESS FOR A PARTICULAR PURPOSE.
- *
- *
- * Xilinx products are not intended for use in life support appliances,
- * devices, or systems. Use in such applications is expressly prohibited.
- *
- *
- * (c) Copyright 2002 Xilinx Inc.
- * All rights reserved.
- *
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/* #define DEBUG */
-/* #define ET_DEBUG 1 */
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-#define CONFIG_405 1 /* This is a PPC405 CPU */
-#define CONFIG_4xx 1 /* ...member of PPC4xx family */
-#define CONFIG_XILINX_405 1
-#define CONFIG_XILINX_ML300 1 /* ...on a Xilinx ML300 board */
-
-#define CONFIG_SYSTEMACE 1
-#define CONFIG_DOS_PARTITION 1
-#define CONFIG_SYS_SYSTEMACE_BASE XPAR_OPB_SYSACE_0_BASEADDR
-#define CONFIG_SYS_SYSTEMACE_WIDTH XPAR_XSYSACE_MEM_WIDTH
-
-#define CONFIG_ENV_IS_IN_EEPROM 1 /* environment is in EEPROM */
-
-/* following are used only if env is in EEPROM */
-#ifdef CONFIG_ENV_IS_IN_EEPROM
-#define CONFIG_SYS_I2C_EEPROM_ADDR XPAR_PERSISTENT_0_IIC_0_EEPROMADDR
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
-#define CONFIG_ENV_OFFSET XPAR_PERSISTENT_0_IIC_0_BASEADDR
-#define CONFIG_MISC_INIT_R 1 /* used to call out convert_env() */
-#define CONFIG_ENV_OVERWRITE 1 /* allow users to update ethaddr and serial# */
-#endif
-
-#include "../board/xilinx/ml300/xparameters.h"
-
-#define CONFIG_SYS_NO_FLASH 1 /* no flash */
-#define CONFIG_ENV_SIZE XPAR_PERSISTENT_0_IIC_0_HIGHADDR - XPAR_PERSISTENT_0_IIC_0_BASEADDR + 1
-#define CONFIG_BAUDRATE 9600
-#define CONFIG_BOOTDELAY 3 /* autoboot after 3 seconds */
-
-#define CONFIG_BOOTCOMMAND "bootp" /* autoboot command */
-
-#define CONFIG_BOOTARGS "console=ttyS0,9600 ip=off " \
- "root=/dev/xsysace/disc0/part3 rw"
-
-#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
-#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_NET
-
-#undef CONFIG_CMD_FLASH
-#undef CONFIG_CMD_LOADS
-#undef CONFIG_CMD_FAT
-#undef CONFIG_CMD_IMLS
-
-
-/* #define CONFIG_SYS_CLK_FREQ XPAR_CORE_CLOCK_FREQ_HZ */
-/* 300000000 */
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
-
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
-
-#define CONFIG_SYS_DUART_CHAN 0
-#define CONFIG_SYS_NS16550_REG_SIZE -4
-#define CONFIG_SYS_NS16550 1
-#define CONFIG_SYS_INIT_CHAN1 1
-
-/* The following table includes the supported baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE \
- {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
-
-#define CONFIG_SYS_LOAD_ADDR 0x400000 /* default load address */
-#define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */
-
-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define CONFIG_SYS_SDRAM_BASE 0x00000000
-#define CONFIG_SYS_MONITOR_BASE 0x04000000
-#define CONFIG_SYS_MONITOR_LEN (192 * 1024) /* Reserve 196 kB for Monitor */
-#define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc() */
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area (in DPRAM)
- */
-
-#define CONFIG_SYS_INIT_RAM_ADDR 0x800000 /* inside of SDRAM */
-#define CONFIG_SYS_INIT_RAM_END 0x2000 /* End of used area in RAM */
-#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM 0x02 /* Software reboot */
-
-#endif /* __CONFIG_H */
projects / u-boot.git / commitdiff