This only takes effect if the memory commands are activated
globally (CONFIG_CMD_MEMORY).
-- CONFIG_SKIP_LOWLEVEL_INIT
- [ARM, NDS32, MIPS, RISC-V only] If this variable is defined, then certain
- low level initializations (like setting up the memory
- controller) are omitted and/or U-Boot does not
- relocate itself into RAM.
-
- Normally this variable MUST NOT be defined. The only
- exception is when U-Boot is loaded (to RAM) by some
- other boot loader or by a debugger which performs
- these initializations itself.
-
-- CONFIG_SKIP_LOWLEVEL_INIT_ONLY
- [ARM926EJ-S only] This allows just the call to lowlevel_init()
- to be skipped. The normal CP15 init (such as enabling the
- instruction cache) is still performed.
-
- CONFIG_SPL_BUILD
Set when the currently-running compilation is for an artifact
that will end up in the SPL (as opposed to the TPL or U-Boot
Note that, its up to the individual architectures to implement
this functionality.
+config SKIP_LOWLEVEL_INIT
+ bool "Skip the calls to certain low level initialization functions"
+ depends on ARM || NDS32 || MIPS || RISCV
+ help
+ If enabled, then certain low level initializations (like setting up
+ the memory controller) are omitted and/or U-Boot does not relocate
+ itself into RAM.
+ Normally this variable MUST NOT be defined. The only exception is
+ when U-Boot is loaded (to RAM) by some other boot loader or by a
+ debugger which performs these initializations itself.
+
+config SPL_SKIP_LOWLEVEL_INIT
+ bool "Skip the calls to certain low level initialization functions"
+ depends on SPL && (ARM || NDS32 || MIPS || RISCV)
+ help
+ If enabled, then certain low level initializations (like setting up
+ the memory controller) are omitted and/or U-Boot does not relocate
+ itself into RAM.
+ Normally this variable MUST NOT be defined. The only exception is
+ when U-Boot is loaded (to RAM) by some other boot loader or by a
+ debugger which performs these initializations itself.
+
+config TPL_SKIP_LOWLEVEL_INIT
+ bool "Skip the calls to certain low level initialization functions"
+ depends on SPL && ARM
+ help
+ If enabled, then certain low level initializations (like setting up
+ the memory controller) are omitted and/or U-Boot does not relocate
+ itself into RAM.
+ Normally this variable MUST NOT be defined. The only exception is
+ when U-Boot is loaded (to RAM) by some other boot loader or by a
+ debugger which performs these initializations itself.
+
+config SKIP_LOWLEVEL_INIT_ONLY
+ bool "Skip the call to lowlevel_init during early boot ONLY"
+ depends on ARM
+ help
+ This allows just the call to lowlevel_init() to be skipped. The
+ normal CP15 init (such as enabling the instruction cache) is still
+ performed.
+
+config SPL_SKIP_LOWLEVEL_INIT_ONLY
+ bool "Skip the call to lowlevel_init during early boot ONLY"
+ depends on SPL && ARM
+ help
+ This allows just the call to lowlevel_init() to be skipped. The
+ normal CP15 init (such as enabling the instruction cache) is still
+ performed.
+
+config TPL_SKIP_LOWLEVEL_INIT_ONLY
+ bool "Skip the call to lowlevel_init during early boot ONLY"
+ depends on TPL && ARM
+ help
+ This allows just the call to lowlevel_init() to be skipped. The
+ normal CP15 init (such as enabling the instruction cache) is still
+ performed.
+
source "arch/arc/Kconfig"
source "arch/arm/Kconfig"
source "arch/m68k/Kconfig"
msr cpsr,r0
/* the mask ROM code should have PLL and others stable */
-#ifndef CONFIG_SKIP_LOWLEVEL_INIT
+#if !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT)
bl cpu_init_crit
#endif
*
*************************************************************************
*/
-#ifndef CONFIG_SKIP_LOWLEVEL_INIT
+#if !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT)
cpu_init_crit:
/*
* flush v4 I/D caches
orr r0, r0, #0x00001000 @ set bit 12 (I) I-Cache
mcr p15, 0, r0, c1, c0, 0
-#ifndef CONFIG_SKIP_LOWLEVEL_INIT_ONLY
+#if !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT_ONLY)
/*
* Jump to board specific initialization... The Mask ROM will have already initialized
* basic memory. Go here to bump up clock rate and handle wake up conditions.
mov lr, ip /* restore link */
#endif
mov pc, lr /* back to my caller */
-#endif /* CONFIG_SKIP_LOWLEVEL_INIT */
+#endif /* !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT) */
* we do sys-critical inits only at reboot,
* not when booting from ram!
*/
-#if !defined(CONFIG_SKIP_LOWLEVEL_INIT) && \
- !defined(CONFIG_SKIP_LOWLEVEL_INIT_ONLY)
+#if !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT) && \
+ !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT_ONLY)
bl cpu_init_crit
#endif
*************************************************************************
*/
-#if !defined(CONFIG_SKIP_LOWLEVEL_INIT) && \
- !defined(CONFIG_SKIP_LOWLEVEL_INIT_ONLY)
+#if !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT) && \
+ !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT_ONLY)
cpu_init_crit:
mov ip, lr
mov lr, ip
mov pc, lr
-#endif /* CONFIG_SKIP_LOWLEVEL_INIT */
+#endif /* CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT) */
* we do sys-critical inits only at reboot,
* not when booting from ram!
*/
-#ifndef CONFIG_SKIP_LOWLEVEL_INIT
+#if !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT)
bl cpu_init_crit
#endif
*/
-#ifndef CONFIG_SKIP_LOWLEVEL_INIT
+#if !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT)
cpu_init_crit:
/*
* flush v4 I/D caches
orr r0, r0, #0x00001000 @ set bit 12 (I) I-Cache
mcr p15, 0, r0, c1, c0, 0
-#ifndef CONFIG_SKIP_LOWLEVEL_INIT_ONLY
+#if !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT_ONLY)
/*
* before relocating, we have to setup RAM timing
* because memory timing is board-dependend, you will
mov lr, ip
#endif
mov pc, lr
-#endif /* CONFIG_SKIP_LOWLEVEL_INIT */
+#endif /* CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT) */
* we do sys-critical inits only at reboot,
* not when booting from ram!
*/
-#ifndef CONFIG_SKIP_LOWLEVEL_INIT
+#if !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT)
bl cpu_init_crit
#endif
*
*************************************************************************
*/
-#ifndef CONFIG_SKIP_LOWLEVEL_INIT
+#if !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT)
cpu_init_crit:
/*
* flush D cache before disabling it
#endif
mcr p15, 0, r0, c1, c0, 0
-#ifndef CONFIG_SKIP_LOWLEVEL_INIT_ONLY
+#if !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT_ONLY)
/*
* Go setup Memory and board specific bits prior to relocation.
*/
mov lr, r4 /* restore link */
#endif
mov pc, lr /* back to my caller */
-#endif /* CONFIG_SKIP_LOWLEVEL_INIT */
+#endif /* CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT) */
* we do sys-critical inits only at reboot,
* not when booting from ram!
*/
-#ifndef CONFIG_SKIP_LOWLEVEL_INIT
+#if !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT)
bl cpu_init_crit
#endif
*/
-#ifndef CONFIG_SKIP_LOWLEVEL_INIT
+#if !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT)
cpu_init_crit:
/*
* flush v4 I/D caches
orr r0, r0, #0x00001000 /* set bit 12 (I) I-Cache */
mcr p15, 0, r0, c1, c0, 0
-#ifndef CONFIG_SKIP_LOWLEVEL_INIT_ONLY
+#if !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT_ONLY)
/*
* Go setup Memory and board specific bits prior to relocation.
*/
obj-$(CONFIG_ARMV7_NONSEC) += exception_level.o
endif
-ifneq ($(CONFIG_SKIP_LOWLEVEL_INIT),y)
+ifneq ($(CONFIG_$(SPL_)SKIP_LOWLEVEL_INIT),y)
obj-y += lowlevel_init.o
endif
#endif
/* the mask ROM code should have PLL and others stable */
-#ifndef CONFIG_SKIP_LOWLEVEL_INIT
+#if !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT)
#ifdef CONFIG_CPU_V7A
bl cpu_init_cp15
#endif
-#ifndef CONFIG_SKIP_LOWLEVEL_INIT_ONLY
+#if !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT_ONLY)
bl cpu_init_crit
#endif
#endif
mov pc, r5 @ back to my caller
ENDPROC(cpu_init_cp15)
-#if !defined(CONFIG_SKIP_LOWLEVEL_INIT) && \
- !defined(CONFIG_SKIP_LOWLEVEL_INIT_ONLY)
+#if !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT) && \
+ !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT_ONLY)
/*************************************************************************
*
* CPU_init_critical registers
select FSL_LAYERSCAPE
select FSL_LSCH2
select GICV2
+ select SKIP_LOWLEVEL_INIT
select SYS_FSL_SRDS_1
select SYS_HAS_SERDES
select SYS_FSL_DDR_BE
select FSL_LSCH2
select GICV2
select HAS_FSL_XHCI_USB if USB_HOST
+ select SKIP_LOWLEVEL_INIT
select SYS_FSL_SRDS_1
select SYS_HAS_SERDES
select SYS_FSL_DDR
select FSL_LSCH2
select GICV2
select HAS_FSL_XHCI_USB if USB_HOST
+ select SKIP_LOWLEVEL_INIT
select SYS_FSL_SRDS_1
select SYS_HAS_SERDES
select SYS_FSL_DDR
select FSL_LAYERSCAPE
select FSL_LSCH3
select GICV3
+ select SKIP_LOWLEVEL_INIT
select SYS_FSL_SRDS_1
select SYS_HAS_SERDES
select SYS_FSL_DDR
select FSL_LAYERSCAPE
select FSL_LSCH3
select GICV3
+ select SKIP_LOWLEVEL_INIT
select SYS_FSL_SRDS_1
select SYS_HAS_SERDES
select SYS_FSL_DDR
config FSL_LSCH2
bool
+ select SKIP_LOWLEVEL_INIT
select SYS_FSL_HAS_CCI400
select SYS_FSL_HAS_SEC
select SYS_FSL_SEC_COMPAT_5
orr r0,r0,#0xd3
msr cpsr,r0
-#ifndef CONFIG_SKIP_LOWLEVEL_INIT
+#if !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT)
bl cpu_init_crit
#endif
*
*************************************************************************
*/
-#if !defined(CONFIG_SKIP_LOWLEVEL_INIT) || defined(CONFIG_CPU_PXA25X)
+#if !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT) || defined(CONFIG_CPU_PXA25X)
cpu_init_crit:
/*
* flush v4 I/D caches
mcr p15, 0, r0, c1, c0, 0
mov pc, lr /* back to my caller */
-#endif /* !CONFIG_SKIP_LOWLEVEL_INIT || CONFIG_CPU_PXA25X */
+#endif /* !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT) || CONFIG_CPU_PXA25X */
/*
* Enable MMU to use DCache as DRAM.
* we do sys-critical inits only at reboot,
* not when booting from ram!
*/
-#ifndef CONFIG_SKIP_LOWLEVEL_INIT
+#if !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT)
bl cpu_init_crit
#endif
ldr r1, cpuspeed
str r1, [r0, #PPCR]
-#ifndef CONFIG_SKIP_LOWLEVEL_INIT_ONLY
+#if !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT_ONLY)
/*
* before relocating, we have to setup RAM timing
* because memory timing is board-dependend, you will
#ifndef __ARCH_ARM_MACH_CHILISOM_SOM_H__
#define __ARCH_ARM_MACH_CHILISOM_SOM_H__
-#ifndef CONFIG_SKIP_LOWLEVEL_INIT
+#if !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT)
void chilisom_enable_pin_mux(void);
void chilisom_spl_board_init(void);
#endif
#include <config.h>
-#ifndef CONFIG_SKIP_LOWLEVEL_INIT
+#if !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT)
#include <asm/arch/hardware.h>
#include <asm/arch/at91_mc.h>
.word CONFIG_SYS_SDRAM_VAL
SMRDATA1E:
/* SMRDATA1 is 176 bytes long */
-#endif /* CONFIG_SKIP_LOWLEVEL_INIT */
+#endif /* CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT) */
};
#endif
-#ifndef CONFIG_SKIP_LOWLEVEL_INIT
+#if !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT)
/* enable all periherial can be accessed in nosec mode */
static void init_csu(void)
{
return usec;
}
-#ifndef CONFIG_SKIP_LOWLEVEL_INIT
+#if !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT)
int timer_init(void)
{
struct sctr_regs *sctr = (struct sctr_regs *)SCTR_BASE_ADDR;
#define CONFIG_SYS_L2_PL310
-#ifdef CONFIG_SPL_BUILD
-#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
-#endif
-
/*
* By default the generated mvebu kwbimage.cfg is used
* If for some board, different configuration file need to be used,
select SPECIFY_CONSOLE_INDEX
imply NAND_OMAP_ELM
imply NAND_OMAP_GPMC
+ imply SKIP_LOWLEVEL_INIT
imply SPL_NAND_AM33XX_BCH
imply SPL_NAND_SUPPORT
imply SYS_I2C_OMAP24XX
obj-$(CONFIG_TI816X) += clock_ti816x.o
obj-y += sys_info.o
obj-y += ddr.o
-ifeq ($(CONFIG_TI816X)$(CONFIG_SKIP_LOWLEVEL_INIT),)
+ifeq ($(CONFIG_TI816X)$(CONFIG_$(SPL_)SKIP_LOWLEVEL_INIT),)
obj-y += emif4.o
endif
obj-$(CONFIG_TI816X) += ti816x_emif4.o
int dram_init(void)
{
-#ifndef CONFIG_SKIP_LOWLEVEL_INIT
+#if !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT)
sdram_init();
#endif
#endif /* CONFIG_USB_MUSB_* && CONFIG_AM335X_USB* && !CONFIG_DM_USB */
-#ifndef CONFIG_SKIP_LOWLEVEL_INIT
+#if !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT)
#if defined(CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC) || \
(defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_RTC_DDR_SUPPORT))
int arch_cpu_init_dm(void)
{
hw_data_init();
-#ifndef CONFIG_SKIP_LOWLEVEL_INIT
+#if !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT)
early_system_init();
#endif
return 0;
#include <power/tps65217.h>
#include <spl.h>
-#ifndef CONFIG_SKIP_LOWLEVEL_INIT
+#if !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT)
static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
&ddr3_chilisom_emif_reg_data, 0);
}
-#endif /* CONFIG_SKIP_LOWLEVEL_INIT */
+#endif /* CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT) */
hw_data_init();
}
-#if !defined(CONFIG_SKIP_LOWLEVEL_INIT) && \
- !defined(CONFIG_SKIP_LOWLEVEL_INIT_ONLY)
+#if !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT) && \
+ !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT_ONLY)
/******************************************************************************
* Routine: secure_unlock
go_to_speed_end:
#endif
-#if !defined(CONFIG_SKIP_LOWLEVEL_INIT) && \
- !defined(CONFIG_SKIP_LOWLEVEL_INIT_ONLY)
+#if !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT) && \
+ !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT_ONLY)
ENTRY(lowlevel_init)
ldr sp, SRAM_STACK
str ip, [sp] /* stash ip register */
obj-y += dram.o
obj-y += timer.o
-ifndef CONFIG_SKIP_LOWLEVEL_INIT
+ifndef CONFIG_$(SPL_)SKIP_LOWLEVEL_INIT
obj-y += lowlevel_init.o
endif
bool "Support Rockchip RK3288"
select CPU_V7A
select OF_BOARD_SETUP
+ select SKIP_LOWLEVEL_INIT_ONLY
select SUPPORT_SPL
select SPL
select SUPPORT_TPL
select CPU_V7A
select SPL
select SPL_BOARD_INIT if SPL
+ select SPL_SKIP_LOWLEVEL_INIT_ONLY if SPL
select SUPPORT_SPL
select TEGRA_CLKRST
select TEGRA_COMMON
# endif
#endif
-#ifndef CONFIG_SKIP_LOWLEVEL_INIT
+#if !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT)
# ifdef CONFIG_SYS_MIPS_CACHE_INIT_RAM_LOAD
/* Initialize any external memory */
PTR_LA t9, lowlevel_init
nop
#endif
-#ifndef CONFIG_SKIP_LOWLEVEL_INIT
+#if !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT)
# ifndef CONFIG_SYS_MIPS_CACHE_INIT_RAM_LOAD
/* Initialize any external memory */
PTR_LA t9, lowlevel_init
.set noreorder
LEAF(mips_sram_init)
-#ifndef CONFIG_SKIP_LOWLEVEL_INIT
+#if !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT)
/* Setup CPU PLL */
li t0, DELAY_USEC(1000000)
li t1, KSEG1ADDR(SYSCTL_BASE + SYSCTL_ROM_STATUS_REG)
sub a1, CONFIG_SYS_DCACHE_LINE_SIZE
bnez a1, 3b
nop
-#endif /* CONFIG_SKIP_LOWLEVEL_INIT */
+#endif /* CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT) */
jr ra
nop
move $lp, $r11
ret
-#ifndef CONFIG_SKIP_LOWLEVEL_INIT
+#if !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT)
.globl lowlevel_init
lowlevel_init:
move $r10, $lp
ret
#endif
-#endif /* #ifndef CONFIG_SKIP_LOWLEVEL_INIT */
+#endif /* #if !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT) */
ret
-#ifndef CONFIG_SKIP_LOWLEVEL_INIT
+#if !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT)
.globl lowlevel_init
lowlevel_init:
li $r8, (CONFIG_DEBUG_LED)
swi $r7, [$r8]
ret
-#endif /* #ifndef CONFIG_SKIP_LOWLEVEL_INIT */
+#endif /* #if !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT) */
jal mem_init
-#ifndef CONFIG_SKIP_LOWLEVEL_INIT
+#if !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT)
jal lowlevel_init
/*
* gp = ~VMA for burn mode
# Copyright (C) 2018 Robert Bosch Power Tools GmbH
#
-ifeq ($(CONFIG_SKIP_LOWLEVEL_INIT),)
+ifeq ($(CONFIG_$(SPL_)SKIP_LOWLEVEL_INIT),)
obj-y := mux.o
endif
DECLARE_GLOBAL_DATA_PTR;
-#ifndef CONFIG_SKIP_LOWLEVEL_INIT
+#if !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT)
static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
static const struct ddr_data ddr3_data = {
# SPDX-License-Identifier: GPL-2.0+
#
-ifeq ($(CONFIG_SKIP_LOWLEVEL_INIT),)
+ifeq ($(CONFIG_$(SPL_)SKIP_LOWLEVEL_INIT),)
obj-y := mux.o
endif
}
}
-#ifndef CONFIG_SKIP_LOWLEVEL_INIT
+#if !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT)
static const struct ddr_data ddr2_data = {
.datardsratio0 = MT47H128M16RT25E_RD_DQS,
.datafwsratio0 = MT47H128M16RT25E_PHY_FIFO_WE,
config_ddr(266, &ioregs, &ddr2_data,
&ddr2_cmd_ctrl_data, &ddr2_emif_reg_data, 0);
}
-#endif /* CONFIG_SKIP_LOWLEVEL_INIT */
+#endif /* CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT) */
#ifdef CONFIG_DEBUG_UART
void board_debug_uart_init(void)
LS1021a rev1.0 Soc specific Options/Settings
--------------------------------------------
-If the LS1021a Soc is rev1.0, you need modify the configure file.
-Add the following define in include/configs/ls1021aqds.h:
-#define CONFIG_SKIP_LOWLEVEL_INIT
+If the LS1021a Soc is rev1.0, you need modify the configuration and enable
+CONFIG_SPL_SKIP_LOWLEVEL_INIT in menuconfig or similar.
LS1021a rev1.0 Soc specific Options/Settings
--------------------------------------------
-If the LS1021a Soc is rev1.0, you need modify the configure file.
-Add the following define in include/configs/ls1021atwr.h:
-#define CONFIG_SKIP_LOWLEVEL_INIT
+If the LS1021a Soc is rev1.0, you need modify the configuration and enable
+CONFIG_SPL_SKIP_LOWLEVEL_INIT in menuconfig or similar.
static __maybe_unused struct ctrl_dev *cdev =
(struct ctrl_dev *)CTRL_DEVICE_BASE;
-#ifndef CONFIG_SKIP_LOWLEVEL_INIT
+#if !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT)
static struct module_pin_mux uart0_pin_mux[] = {
{OFFSET(uart0_rxd), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* UART0_RXD */
{OFFSET(uart0_txd), (MODE(0) | PULLUDEN)}, /* UART0_TXD */
configure_module_pin_mux(rmii1_pin_mux);
configure_module_pin_mux(mmc0_pin_mux);
}
-#endif /* CONFIG_SKIP_LOWLEVEL_INIT */
-#ifndef CONFIG_SKIP_LOWLEVEL_INIT
void set_uart_mux_conf(void)
{
configure_module_pin_mux(uart0_pin_mux);
{
chilisom_spl_board_init();
}
-#endif
+#endif /* CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT) */
/*
* Basic board specific setup. Pinmux has been handled already.
void __iomem *rst_regs = map_physmem(AR71XX_RESET_BASE,
AR71XX_RESET_SIZE, MAP_NOCACHE);
-#ifndef CONFIG_SKIP_LOWLEVEL_INIT
+#if !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT)
/* CPU:775, DDR:650, AHB:258 */
qca956x_pll_init();
qca956x_ddr_init();
#
# Copyright (C) 2015 Toby Churchill Ltd - http://www.toby-churchill.com/
-ifeq ($(CONFIG_SKIP_LOWLEVEL_INIT),)
+ifeq ($(CONFIG_$(SPL_)SKIP_LOWLEVEL_INIT),)
obj-y := mux.o
endif
static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
-#ifndef CONFIG_SKIP_LOWLEVEL_INIT
+#if !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT)
static const struct ddr_data ddr3_sl50_data = {
.datardsratio0 = MT41K256M16HA125E_RD_DQS,
#
# Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
-ifeq ($(CONFIG_SKIP_LOWLEVEL_INIT),)
+ifeq ($(CONFIG_$(SPL_)SKIP_LOWLEVEL_INIT),)
obj-y := mux.o
endif
}
#endif
-#ifndef CONFIG_SKIP_LOWLEVEL_INIT
+#if !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT)
static const struct ddr_data ddr2_data = {
.datardsratio0 = MT47H128M16RT25E_RD_DQS,
.datafwsratio0 = MT47H128M16RT25E_PHY_FIFO_WE,
#
# Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
-ifeq ($(CONFIG_SKIP_LOWLEVEL_INIT),)
+ifeq ($(CONFIG_$(SPL_)SKIP_LOWLEVEL_INIT),)
obj-y := mux.o
endif
}
#endif
-#ifndef CONFIG_SKIP_LOWLEVEL_INIT
+#if !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT)
const struct dpll_params dpll_mpu[NUM_CRYSTAL_FREQ][NUM_OPPS] = {
{ /* 19.2 MHz */
wdr4300_pinmux_config();
#endif
-#ifndef CONFIG_SKIP_LOWLEVEL_INIT
+#if !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT)
ar934x_pll_init(560, 480, 240);
ar934x_ddr_init(560, 480, 240);
#endif
#
# Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
-ifeq ($(CONFIG_SKIP_LOWLEVEL_INIT),)
+ifeq ($(CONFIG_$(SPL_)SKIP_LOWLEVEL_INIT),)
obj-y := mux.o
endif
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_SYS_DCACHE_OFF=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_ARCH_KIRKWOOD=y
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_SYS_DCACHE_OFF=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_ARCH_KIRKWOOD=y
CONFIG_NDS32=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_SYS_TEXT_BASE=0x4A000000
CONFIG_NR_DRAM_BANKS=2
CONFIG_ENV_SIZE=0x2000
CONFIG_NDS32=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_SYS_TEXT_BASE=0x11000000
CONFIG_NR_DRAM_BANKS=2
CONFIG_ENV_SIZE=0x2000
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_ARCH_OMAP2PLUS=y
CONFIG_TI_COMMON_CMD_OPTIONS=y
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_ARCH_OMAP2PLUS=y
CONFIG_TI_COMMON_CMD_OPTIONS=y
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_ARCH_OMAP2PLUS=y
CONFIG_ISW_ENTRY_ADDR=0x40300350
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_ARCH_OMAP2PLUS=y
CONFIG_TI_SECURE_DEVICE=y
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_K3=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_K3=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_K3=y
CONFIG_TI_SECURE_DEVICE=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
+CONFIG_SPL_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_ARCH_EXYNOS=y
CONFIG_SYS_TEXT_BASE=0x43E00000
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_TARGET_ASPENITE=y
CONFIG_SYS_TEXT_BASE=0x600000
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_ARCH_AT91=y
CONFIG_SYS_TEXT_BASE=0x21f00000
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_ARCH_AT91=y
CONFIG_SYS_TEXT_BASE=0x21f00000
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_ARCH_AT91=y
CONFIG_SYS_TEXT_BASE=0x21f00000
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_AT91=y
CONFIG_SYS_TEXT_BASE=0x21f00000
CONFIG_TARGET_AT91SAM9261EK=y
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_AT91=y
CONFIG_SYS_TEXT_BASE=0x21f00000
CONFIG_TARGET_AT91SAM9261EK=y
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_AT91=y
CONFIG_SYS_TEXT_BASE=0x21f00000
CONFIG_TARGET_AT91SAM9261EK=y
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_ARCH_AT91=y
CONFIG_SYS_TEXT_BASE=0x21F00000
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_ARCH_AT91=y
CONFIG_SYS_TEXT_BASE=0x21F00000
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_ARCH_AT91=y
CONFIG_SYS_TEXT_BASE=0x21F00000
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_ARCH_AT91=y
CONFIG_SYS_TEXT_BASE=0x21F00000
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_AT91=y
CONFIG_SYS_TEXT_BASE=0x21f00000
CONFIG_TARGET_AT91SAM9261EK=y
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_AT91=y
CONFIG_SYS_TEXT_BASE=0x21f00000
CONFIG_TARGET_AT91SAM9261EK=y
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_AT91=y
CONFIG_SYS_TEXT_BASE=0x21f00000
CONFIG_TARGET_AT91SAM9261EK=y
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_ARCH_AT91=y
CONFIG_SYS_TEXT_BASE=0x21f00000
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_ARCH_AT91=y
CONFIG_SYS_TEXT_BASE=0x21f00000
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_ARCH_AT91=y
CONFIG_SYS_TEXT_BASE=0x21f00000
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_ARCH_AT91=y
CONFIG_SYS_TEXT_BASE=0x21f00000
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_ARCH_AT91=y
CONFIG_SYS_TEXT_BASE=0x21f00000
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_AT91=y
CONFIG_SYS_TEXT_BASE=0x73f00000
CONFIG_TARGET_AT91SAM9M10G45EK=y
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_AT91=y
CONFIG_SYS_TEXT_BASE=0x73f00000
CONFIG_TARGET_AT91SAM9M10G45EK=y
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_AT91=y
CONFIG_SYS_TEXT_BASE=0x26f00000
CONFIG_TARGET_AT91SAM9N12EK=y
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_AT91=y
CONFIG_SYS_TEXT_BASE=0x26f00000
CONFIG_TARGET_AT91SAM9N12EK=y
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_AT91=y
CONFIG_SYS_TEXT_BASE=0x26f00000
CONFIG_TARGET_AT91SAM9N12EK=y
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_ARCH_AT91=y
CONFIG_SYS_TEXT_BASE=0x21F00000
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_ARCH_AT91=y
CONFIG_SYS_TEXT_BASE=0x21F00000
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_ARCH_AT91=y
CONFIG_SYS_TEXT_BASE=0x21F00000
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_AT91=y
CONFIG_SYS_TEXT_BASE=0x26f00000
CONFIG_TARGET_AT91SAM9X5EK=y
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_AT91=y
CONFIG_SYS_TEXT_BASE=0x26f00000
CONFIG_TARGET_AT91SAM9X5EK=y
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_AT91=y
CONFIG_SYS_TEXT_BASE=0x26f00000
CONFIG_TARGET_AT91SAM9X5EK=y
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_AT91=y
CONFIG_SYS_TEXT_BASE=0x26f00000
CONFIG_TARGET_AT91SAM9X5EK=y
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_ARCH_AT91=y
CONFIG_SYS_TEXT_BASE=0x21f00000
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_ARCH_AT91=y
CONFIG_SYS_TEXT_BASE=0x21f00000
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_ARCH_AT91=y
CONFIG_SYS_TEXT_BASE=0x21f00000
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT_ONLY=y
+CONFIG_SPL_SKIP_LOWLEVEL_INIT_ONLY=y
CONFIG_SPL_SYS_DCACHE_OFF=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_SYS_THUMB_BUILD=y
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_BCMSTB=y
CONFIG_SYS_TEXT_BASE=0x10100000
CONFIG_TARGET_BCM7260=y
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_BCMSTB=y
CONFIG_SYS_TEXT_BASE=0x80100000
CONFIG_TARGET_BCM7445=y
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
# CONFIG_ARM64_SUPPORT_AARCH32 is not set
CONFIG_ARCH_BCM63158=y
CONFIG_SYS_TEXT_BASE=0x10000000
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_BCM68360=y
CONFIG_SYS_TEXT_BASE=0x10000000
CONFIG_SYS_MALLOC_F_LEN=0x8000
CONFIG_MIPS=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_SYS_TEXT_BASE=0x80010000
CONFIG_NR_DRAM_BANKS=1
CONFIG_ENV_SIZE=0x2000
CONFIG_DEFAULT_DEVICE_TREE="brcm,bcm968380gerg"
CONFIG_ARCH_BMIPS=y
CONFIG_SOC_BMIPS_BCM6838=y
+CONFIG_MIPS_CACHE_SETUP=y
+CONFIG_MIPS_CACHE_DISABLE=y
# CONFIG_MIPS_BOOT_CMDLINE_LEGACY is not set
# CONFIG_MIPS_BOOT_ENV_LEGACY is not set
CONFIG_MIPS_BOOT_FDT=y
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_BCM6858=y
CONFIG_SYS_TEXT_BASE=0x10000000
CONFIG_SYS_MALLOC_F_LEN=0x8000
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_SYS_THUMB_BUILD=y
CONFIG_ARCH_VF610=y
CONFIG_SYS_TEXT_BASE=0x3f401000
CONFIG_ARM=y
+CONFIG_SPL_SKIP_LOWLEVEL_INIT=y
# CONFIG_SPL_USE_ARCH_MEMCPY is not set
CONFIG_ARCH_ROCKCHIP=y
CONFIG_SYS_TEXT_BASE=0x00100000
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_ROCKCHIP=y
CONFIG_SYS_TEXT_BASE=0x00200000
CONFIG_SPL_GPIO=y
CONFIG_ARM=y
+CONFIG_SPL_SKIP_LOWLEVEL_INIT=y
# CONFIG_SPL_USE_ARCH_MEMCPY is not set
CONFIG_ARCH_ROCKCHIP=y
CONFIG_SYS_TEXT_BASE=0x00100000
CONFIG_ARM=y
+CONFIG_SPL_SKIP_LOWLEVEL_INIT=y
# CONFIG_SPL_USE_ARCH_MEMCPY is not set
CONFIG_ARCH_ROCKCHIP=y
CONFIG_SYS_TEXT_BASE=0x00100000
CONFIG_ARM=y
+CONFIG_SPL_SKIP_LOWLEVEL_INIT=y
# CONFIG_SPL_USE_ARCH_MEMCPY is not set
CONFIG_ARCH_ROCKCHIP=y
CONFIG_SYS_TEXT_BASE=0x00100000
CONFIG_MIPS=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_SYS_TEXT_BASE=0x80010000
CONFIG_SPL_GPIO=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_ARM=y
+CONFIG_SPL_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_SYS_THUMB_BUILD=y
CONFIG_ARCH_MVEBU=y
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_ARCH_OMAP2PLUS=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_SYS_THUMB_BUILD=y
CONFIG_ARCH_VF610=y
CONFIG_SYS_TEXT_BASE=0x3f401000
CONFIG_MIPS=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_SYS_TEXT_BASE=0x80010000
CONFIG_NR_DRAM_BANKS=1
CONFIG_ENV_SIZE=0x2000
CONFIG_DEFAULT_DEVICE_TREE="comtrend,ar-5315u"
CONFIG_ARCH_BMIPS=y
CONFIG_SOC_BMIPS_BCM6318=y
+CONFIG_MIPS_CACHE_SETUP=y
+CONFIG_MIPS_CACHE_DISABLE=y
# CONFIG_MIPS_BOOT_CMDLINE_LEGACY is not set
# CONFIG_MIPS_BOOT_ENV_LEGACY is not set
CONFIG_MIPS_BOOT_FDT=y
CONFIG_MIPS=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_SYS_TEXT_BASE=0x80010000
CONFIG_NR_DRAM_BANKS=1
CONFIG_ENV_SIZE=0x2000
CONFIG_DEFAULT_DEVICE_TREE="comtrend,ar-5387un"
CONFIG_ARCH_BMIPS=y
CONFIG_SOC_BMIPS_BCM6328=y
+CONFIG_MIPS_CACHE_SETUP=y
+CONFIG_MIPS_CACHE_DISABLE=y
# CONFIG_MIPS_BOOT_CMDLINE_LEGACY is not set
# CONFIG_MIPS_BOOT_ENV_LEGACY is not set
CONFIG_MIPS_BOOT_FDT=y
CONFIG_MIPS=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_SYS_TEXT_BASE=0x80010000
CONFIG_NR_DRAM_BANKS=1
CONFIG_ENV_SIZE=0x2000
CONFIG_DEFAULT_DEVICE_TREE="comtrend,ct-5361"
CONFIG_ARCH_BMIPS=y
CONFIG_SOC_BMIPS_BCM6348=y
+CONFIG_MIPS_CACHE_SETUP=y
+CONFIG_MIPS_CACHE_DISABLE=y
# CONFIG_MIPS_BOOT_CMDLINE_LEGACY is not set
# CONFIG_MIPS_BOOT_ENV_LEGACY is not set
CONFIG_MIPS_BOOT_FDT=y
CONFIG_MIPS=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_SYS_TEXT_BASE=0x80010000
CONFIG_NR_DRAM_BANKS=1
CONFIG_ENV_SIZE=0x2000
CONFIG_DEFAULT_DEVICE_TREE="comtrend,vr-3032u"
CONFIG_ARCH_BMIPS=y
CONFIG_SOC_BMIPS_BCM63268=y
+CONFIG_MIPS_CACHE_SETUP=y
+CONFIG_MIPS_CACHE_DISABLE=y
# CONFIG_MIPS_BOOT_CMDLINE_LEGACY is not set
# CONFIG_MIPS_BOOT_ENV_LEGACY is not set
CONFIG_MIPS_BOOT_FDT=y
CONFIG_MIPS=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_SYS_TEXT_BASE=0x80010000
CONFIG_NR_DRAM_BANKS=1
CONFIG_ENV_SIZE=0x2000
CONFIG_DEFAULT_DEVICE_TREE="comtrend,wap-5813n"
CONFIG_ARCH_BMIPS=y
CONFIG_SOC_BMIPS_BCM6368=y
+CONFIG_MIPS_CACHE_SETUP=y
+CONFIG_MIPS_CACHE_DISABLE=y
# CONFIG_MIPS_BOOT_CMDLINE_LEGACY is not set
# CONFIG_MIPS_BOOT_ENV_LEGACY is not set
CONFIG_MIPS_BOOT_FDT=y
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
+CONFIG_SPL_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_ARCH_MVEBU=y
CONFIG_SYS_TEXT_BASE=0x00800000
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT_ONLY=y
+CONFIG_SPL_SKIP_LOWLEVEL_INIT_ONLY=y
CONFIG_SYS_THUMB_BUILD=y
# CONFIG_SPL_USE_ARCH_MEMCPY is not set
# CONFIG_SPL_USE_ARCH_MEMSET is not set
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_SYS_DCACHE_OFF=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_ARCH_KIRKWOOD=y
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT_ONLY=y
+CONFIG_SPL_SKIP_LOWLEVEL_INIT_ONLY=y
CONFIG_SYS_THUMB_BUILD=y
CONFIG_ARCH_DAVINCI=y
CONFIG_SYS_TEXT_BASE=0xc1080000
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT_ONLY=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_ARCH_DAVINCI=y
CONFIG_SYS_TEXT_BASE=0x60000000
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT_ONLY=y
+CONFIG_SPL_SKIP_LOWLEVEL_INIT_ONLY=y
CONFIG_SYS_THUMB_BUILD=y
CONFIG_ARCH_DAVINCI=y
CONFIG_SYS_TEXT_BASE=0xc1080000
CONFIG_ARM=y
+CONFIG_SPL_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_ARCH_MVEBU=y
CONFIG_SYS_TEXT_BASE=0x00800000
CONFIG_ARM=y
+CONFIG_SPL_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_ARCH_MVEBU=y
CONFIG_SYS_TEXT_BASE=0x00800000
CONFIG_ARM=y
+CONFIG_SPL_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_ARCH_MVEBU=y
CONFIG_SYS_TEXT_BASE=0x00800000
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_SYS_ICACHE_OFF=y
CONFIG_SYS_DCACHE_OFF=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_SYS_DCACHE_OFF=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_ARCH_KIRKWOOD=y
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_SYS_DCACHE_OFF=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_ARCH_KIRKWOOD=y
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_SYS_DCACHE_OFF=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_ARCH_KIRKWOOD=y
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_SYS_DCACHE_OFF=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_ARCH_KIRKWOOD=y
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_SYS_ICACHE_OFF=y
CONFIG_SYS_DCACHE_OFF=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_ROCKCHIP=y
CONFIG_SYS_TEXT_BASE=0x60000000
CONFIG_NR_DRAM_BANKS=1
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_ARCH_AT91=y
CONFIG_SYS_TEXT_BASE=0x27000000
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_ROCKCHIP=y
CONFIG_SYS_TEXT_BASE=0x00200000
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_ROCKCHIP=y
CONFIG_SYS_TEXT_BASE=0x00200000
CONFIG_NR_DRAM_BANKS=1
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
+CONFIG_SPL_SKIP_LOWLEVEL_INIT=y
# CONFIG_SPL_USE_ARCH_MEMCPY is not set
# CONFIG_SPL_USE_ARCH_MEMSET is not set
CONFIG_ARCH_ROCKCHIP=y
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_ROCKCHIP=y
CONFIG_SYS_TEXT_BASE=0x60000000
CONFIG_NR_DRAM_BANKS=2
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
+CONFIG_SPL_SKIP_LOWLEVEL_INIT=y
+CONFIG_TPL_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_ROCKCHIP=y
CONFIG_SYS_TEXT_BASE=0x61000000
CONFIG_NR_DRAM_BANKS=2
CONFIG_ARM=y
+CONFIG_SPL_SKIP_LOWLEVEL_INIT_ONLY=y
+CONFIG_TPL_SKIP_LOWLEVEL_INIT_ONLY=y
CONFIG_ARCH_ROCKCHIP=y
CONFIG_SYS_TEXT_BASE=0x01000000
CONFIG_NR_DRAM_BANKS=2
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_ROCKCHIP=y
CONFIG_SYS_TEXT_BASE=0x00600000
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_ROCKCHIP=y
CONFIG_SYS_TEXT_BASE=0x00200000
CONFIG_NR_DRAM_BANKS=1
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_ROCKCHIP=y
CONFIG_SYS_TEXT_BASE=0x00200000
CONFIG_NR_DRAM_BANKS=1
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_ROCKCHIP=y
CONFIG_SYS_TEXT_BASE=0x00a00000
CONFIG_NR_DRAM_BANKS=2
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_ROCKCHIP=y
CONFIG_SYS_TEXT_BASE=0x60000000
CONFIG_NR_DRAM_BANKS=1
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_ROCKCHIP=y
CONFIG_SYS_TEXT_BASE=0x00200000
CONFIG_ENV_OFFSET=0x3F8000
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_ROCKCHIP=y
CONFIG_SYS_TEXT_BASE=0x00200000
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_ARM=y
+CONFIG_SPL_SKIP_LOWLEVEL_INIT_ONLY=y
+CONFIG_TPL_SKIP_LOWLEVEL_INIT_ONLY=y
CONFIG_ARCH_ROCKCHIP=y
CONFIG_SYS_TEXT_BASE=0x01000000
CONFIG_NR_DRAM_BANKS=1
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_ROCKCHIP=y
CONFIG_SYS_TEXT_BASE=0x00200000
CONFIG_NR_DRAM_BANKS=1
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
+CONFIG_SPL_SKIP_LOWLEVEL_INIT_ONLY=y
CONFIG_SYS_THUMB_BUILD=y
CONFIG_ARCH_AT91=y
CONFIG_SYS_TEXT_BASE=0x22900000
CONFIG_MIPS=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_NR_DRAM_BANKS=1
CONFIG_ENV_OFFSET_REDUND=0xB0000
CONFIG_ARCH_MTMIPS=y
CONFIG_SOC_MT7628=y
+CONFIG_MIPS_CACHE_SETUP=y
+CONFIG_MIPS_CACHE_DISABLE=y
CONFIG_RESTORE_EXCEPTION_VECTOR_BASE=y
# CONFIG_MIPS_BOOT_ENV_LEGACY is not set
CONFIG_MIPS_BOOT_FDT=y
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_ROCKCHIP=y
CONFIG_SYS_TEXT_BASE=0x00200000
CONFIG_SYS_MALLOC_F_LEN=0x1000
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_SYS_DCACHE_OFF=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_ARCH_KIRKWOOD=y
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT_ONLY=y
CONFIG_ARCH_AT91=y
CONFIG_SYS_TEXT_BASE=0x73f00000
CONFIG_TARGET_GURNARD=y
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_SYS_DCACHE_OFF=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_ARCH_KIRKWOOD=y
CONFIG_ARM=y
+CONFIG_SPL_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_SYS_THUMB_BUILD=y
CONFIG_ARCH_MVEBU=y
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_SYS_DCACHE_OFF=y
CONFIG_SYS_THUMB_BUILD=y
CONFIG_ARCH_HIGHBANK=y
CONFIG_MIPS=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_SYS_TEXT_BASE=0x80010000
CONFIG_NR_DRAM_BANKS=1
CONFIG_ENV_SIZE=0x2000
CONFIG_DEFAULT_DEVICE_TREE="huawei,hg556a"
CONFIG_ARCH_BMIPS=y
CONFIG_SOC_BMIPS_BCM6358=y
+CONFIG_MIPS_CACHE_SETUP=y
+CONFIG_MIPS_CACHE_DISABLE=y
# CONFIG_MIPS_BOOT_CMDLINE_LEGACY is not set
# CONFIG_MIPS_BOOT_ENV_LEGACY is not set
CONFIG_MIPS_BOOT_FDT=y
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_SYS_DCACHE_OFF=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_ARCH_KIRKWOOD=y
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_SYS_DCACHE_OFF=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_ARCH_KIRKWOOD=y
CONFIG_MIPS=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_SYS_MALLOC_F_LEN=0x600
CONFIG_ENV_SIZE=0x4000
CONFIG_DEFAULT_DEVICE_TREE="nexys4ddr"
CONFIG_TARGET_XILFPGA=y
+CONFIG_MIPS_CACHE_SETUP=y
+CONFIG_MIPS_CACHE_DISABLE=y
# CONFIG_MIPS_BOOT_ENV_LEGACY is not set
CONFIG_MIPS_BOOT_FDT=y
CONFIG_SYS_LOAD_ADDR=0x80500000
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_SYS_DCACHE_OFF=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_ARCH_KIRKWOOD=y
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
+CONFIG_SPL_SKIP_LOWLEVEL_INIT=y
CONFIG_SYS_DCACHE_OFF=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_ARCH_KEYSTONE=y
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_SYS_DCACHE_OFF=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_ARCH_KEYSTONE=y
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
+CONFIG_SPL_SKIP_LOWLEVEL_INIT=y
CONFIG_SYS_DCACHE_OFF=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_ARCH_KEYSTONE=y
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_SYS_DCACHE_OFF=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_ARCH_KEYSTONE=y
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
+CONFIG_SPL_SKIP_LOWLEVEL_INIT=y
CONFIG_SYS_DCACHE_OFF=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_ARCH_KEYSTONE=y
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_SYS_DCACHE_OFF=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_ARCH_KEYSTONE=y
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
+CONFIG_SPL_SKIP_LOWLEVEL_INIT=y
CONFIG_SYS_DCACHE_OFF=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_ARCH_KEYSTONE=y
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_SYS_DCACHE_OFF=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_ARCH_KEYSTONE=y
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_ROCKCHIP=y
CONFIG_SYS_TEXT_BASE=0x00200000
CONFIG_NR_DRAM_BANKS=1
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_ROCKCHIP=y
CONFIG_SYS_TEXT_BASE=0x00200000
CONFIG_NR_DRAM_BANKS=1
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_ROCKCHIP=y
CONFIG_SYS_TEXT_BASE=0x00200000
CONFIG_NR_DRAM_BANKS=1
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_SYS_DCACHE_OFF=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_ARCH_KIRKWOOD=y
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_SYS_DCACHE_OFF=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_ARCH_KIRKWOOD=y
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_SYS_DCACHE_OFF=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_ARCH_KIRKWOOD=y
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_SYS_DCACHE_OFF=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_ARCH_KIRKWOOD=y
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_SYS_DCACHE_OFF=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_ARCH_KIRKWOOD=y
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_SYS_DCACHE_OFF=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_ARCH_KIRKWOOD=y
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
+CONFIG_SPL_SKIP_LOWLEVEL_INIT=y
# CONFIG_SPL_USE_ARCH_MEMCPY is not set
# CONFIG_SPL_USE_ARCH_MEMSET is not set
CONFIG_ARCH_ROCKCHIP=y
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_ROCKCHIP=y
CONFIG_SYS_TEXT_BASE=0x00200000
CONFIG_NR_DRAM_BANKS=1
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_DAVINCI=y
CONFIG_SYS_TEXT_BASE=0xc1080000
CONFIG_TARGET_LEGOEV3=y
CONFIG_MIPS=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_NR_DRAM_BANKS=1
CONFIG_ARCH_MTMIPS=y
CONFIG_SOC_MT7628=y
CONFIG_BOARD_LINKIT_SMART_7688=y
+CONFIG_MIPS_CACHE_SETUP=y
+CONFIG_MIPS_CACHE_DISABLE=y
CONFIG_RESTORE_EXCEPTION_VECTOR_BASE=y
# CONFIG_MIPS_BOOT_ENV_LEGACY is not set
CONFIG_MIPS_BOOT_FDT=y
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_ROCKCHIP=y
CONFIG_SYS_TEXT_BASE=0x00200000
CONFIG_NR_DRAM_BANKS=1
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_TARGET_LS1021AQDS=y
CONFIG_SYS_TEXT_BASE=0x60100000
CONFIG_NR_DRAM_BANKS=1
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_TARGET_LS1021AQDS=y
CONFIG_SYS_TEXT_BASE=0x60100000
CONFIG_NR_DRAM_BANKS=1
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
+CONFIG_SPL_SKIP_LOWLEVEL_INIT=y
CONFIG_TARGET_LS1021AQDS=y
CONFIG_SYS_TEXT_BASE=0x82000000
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_TARGET_LS1021AQDS=y
CONFIG_SYS_TEXT_BASE=0x60100000
CONFIG_NR_DRAM_BANKS=1
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_TARGET_LS1021AQDS=y
CONFIG_SYS_TEXT_BASE=0x60100000
CONFIG_NR_DRAM_BANKS=1
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_TARGET_LS1021AQDS=y
CONFIG_SYS_TEXT_BASE=0x60100000
CONFIG_NR_DRAM_BANKS=1
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_TARGET_LS1021AQDS=y
CONFIG_SYS_TEXT_BASE=0x40100000
CONFIG_NR_DRAM_BANKS=1
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
+CONFIG_SPL_SKIP_LOWLEVEL_INIT=y
CONFIG_TARGET_LS1021AQDS=y
CONFIG_SYS_TEXT_BASE=0x82000000
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
+CONFIG_SPL_SKIP_LOWLEVEL_INIT=y
CONFIG_TARGET_LS1021AQDS=y
CONFIG_SYS_TEXT_BASE=0x82000000
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_TARGET_LS1021ATWR=y
CONFIG_SYS_TEXT_BASE=0x60100000
CONFIG_NR_DRAM_BANKS=1
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_TARGET_LS1021ATWR=y
CONFIG_SYS_TEXT_BASE=0x60100000
CONFIG_NR_DRAM_BANKS=1
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_TARGET_LS1021ATWR=y
CONFIG_SYS_TEXT_BASE=0x60100000
CONFIG_NR_DRAM_BANKS=1
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_TARGET_LS1021ATWR=y
CONFIG_SYS_TEXT_BASE=0x40100000
CONFIG_NR_DRAM_BANKS=1
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
+CONFIG_SPL_SKIP_LOWLEVEL_INIT=y
CONFIG_TARGET_LS1021ATWR=y
CONFIG_SYS_TEXT_BASE=0x82000000
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
+CONFIG_SPL_SKIP_LOWLEVEL_INIT=y
CONFIG_TARGET_LS1021ATWR=y
CONFIG_SYS_TEXT_BASE=0x82000000
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
+CONFIG_SPL_SKIP_LOWLEVEL_INIT=y
CONFIG_TARGET_LS1021ATWR=y
CONFIG_SYS_TEXT_BASE=0x82000000
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_GIC_V3_ITS=y
CONFIG_TARGET_LS1028AQDS=y
CONFIG_TFABOOT=y
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_GIC_V3_ITS=y
CONFIG_TARGET_LS1028AQDS=y
CONFIG_TFABOOT=y
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_TARGET_LS1028AQDS=y
CONFIG_TFABOOT=y
CONFIG_SYS_MALLOC_F_LEN=0x6000
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_GIC_V3_ITS=y
CONFIG_TARGET_LS1028ARDB=y
CONFIG_TFABOOT=y
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_GIC_V3_ITS=y
CONFIG_TARGET_LS1028ARDB=y
CONFIG_TFABOOT=y
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_SYS_DCACHE_OFF=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_ARCH_KIRKWOOD=y
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_SYS_DCACHE_OFF=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_ARCH_KIRKWOOD=y
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_GIC_V3_ITS=y
CONFIG_TARGET_LX2160AQDS=y
CONFIG_TFABOOT=y
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_GIC_V3_ITS=y
CONFIG_TARGET_LX2160AQDS=y
CONFIG_TFABOOT=y
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_GIC_V3_ITS=y
CONFIG_TARGET_LX2160ARDB=y
CONFIG_TFABOOT=y
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_GIC_V3_ITS=y
CONFIG_TARGET_LX2160ARDB=y
CONFIG_TFABOOT=y
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_GIC_V3_ITS=y
CONFIG_TARGET_LX2160ARDB=y
CONFIG_TFABOOT=y
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_GIC_V3_ITS=y
CONFIG_TARGET_LX2162AQDS=y
CONFIG_TFABOOT=y
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_GIC_V3_ITS=y
CONFIG_TARGET_LX2162AQDS=y
CONFIG_TFABOOT=y
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_GIC_V3_ITS=y
CONFIG_TARGET_LX2162AQDS=y
CONFIG_TFABOOT=y
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_ARCH_AT91=y
CONFIG_SYS_TEXT_BASE=0x21F00000
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_ARCH_AT91=y
CONFIG_SYS_TEXT_BASE=0x21F00000
CONFIG_ARM=y
+CONFIG_SPL_SKIP_LOWLEVEL_INIT_ONLY=y
CONFIG_ARCH_ROCKCHIP=y
CONFIG_SYS_TEXT_BASE=0x00000000
CONFIG_NR_DRAM_BANKS=1
CONFIG_MIPS=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_NR_DRAM_BANKS=1
CONFIG_DEBUG_UART_CLOCK=40000000
CONFIG_ARCH_MTMIPS=y
CONFIG_BOARD_MT7620_MT7530_RFB=y
+CONFIG_MIPS_CACHE_SETUP=y
+CONFIG_MIPS_CACHE_DISABLE=y
CONFIG_RESTORE_EXCEPTION_VECTOR_BASE=y
CONFIG_MIPS_BOOT_FDT=y
CONFIG_DEBUG_UART=y
CONFIG_MIPS=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_NR_DRAM_BANKS=1
CONFIG_DEBUG_UART_BASE=0xb0000c00
CONFIG_DEBUG_UART_CLOCK=40000000
CONFIG_ARCH_MTMIPS=y
+CONFIG_MIPS_CACHE_SETUP=y
+CONFIG_MIPS_CACHE_DISABLE=y
CONFIG_RESTORE_EXCEPTION_VECTOR_BASE=y
CONFIG_MIPS_BOOT_FDT=y
CONFIG_DEBUG_UART=y
CONFIG_MIPS=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_NR_DRAM_BANKS=1
CONFIG_ARCH_MTMIPS=y
CONFIG_SOC_MT7628=y
CONFIG_BOARD_MT7628_RFB=y
+CONFIG_MIPS_CACHE_SETUP=y
+CONFIG_MIPS_CACHE_DISABLE=y
CONFIG_RESTORE_EXCEPTION_VECTOR_BASE=y
CONFIG_MIPS_BOOT_FDT=y
CONFIG_SYS_LOAD_ADDR=0x80010000
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_ROCKCHIP=y
CONFIG_SYS_TEXT_BASE=0x00200000
CONFIG_NR_DRAM_BANKS=1
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_ROCKCHIP=y
CONFIG_SYS_TEXT_BASE=0x00200000
CONFIG_NR_DRAM_BANKS=1
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_ROCKCHIP=y
CONFIG_SYS_TEXT_BASE=0x00200000
CONFIG_NR_DRAM_BANKS=1
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_ROCKCHIP=y
CONFIG_SYS_TEXT_BASE=0x00200000
CONFIG_NR_DRAM_BANKS=1
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_ROCKCHIP=y
CONFIG_SYS_TEXT_BASE=0x00200000
CONFIG_NR_DRAM_BANKS=1
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_ROCKCHIP=y
CONFIG_SYS_TEXT_BASE=0x00200000
CONFIG_SPL_GPIO=y
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_ROCKCHIP=y
CONFIG_SYS_TEXT_BASE=0x00200000
CONFIG_NR_DRAM_BANKS=1
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_SYS_DCACHE_OFF=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_ARCH_KIRKWOOD=y
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_SYS_DCACHE_OFF=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_ARCH_KIRKWOOD=y
CONFIG_MIPS=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_SYS_TEXT_BASE=0x80010000
CONFIG_NR_DRAM_BANKS=1
CONFIG_ENV_SIZE=0x2000
CONFIG_DM_GPIO=y
CONFIG_DEFAULT_DEVICE_TREE="netgear,cg3100d"
CONFIG_ARCH_BMIPS=y
+CONFIG_MIPS_CACHE_SETUP=y
+CONFIG_MIPS_CACHE_DISABLE=y
# CONFIG_MIPS_BOOT_CMDLINE_LEGACY is not set
# CONFIG_MIPS_BOOT_ENV_LEGACY is not set
CONFIG_MIPS_BOOT_FDT=y
CONFIG_MIPS=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_SYS_TEXT_BASE=0x80010000
CONFIG_NR_DRAM_BANKS=1
CONFIG_ENV_SIZE=0x2000
CONFIG_DEFAULT_DEVICE_TREE="netgear,dgnd3700v2"
CONFIG_ARCH_BMIPS=y
CONFIG_SOC_BMIPS_BCM6362=y
+CONFIG_MIPS_CACHE_SETUP=y
+CONFIG_MIPS_CACHE_DISABLE=y
# CONFIG_MIPS_BOOT_CMDLINE_LEGACY is not set
# CONFIG_MIPS_BOOT_ENV_LEGACY is not set
CONFIG_MIPS_BOOT_FDT=y
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_SYS_DCACHE_OFF=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_ARCH_KIRKWOOD=y
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_SYS_DCACHE_OFF=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_ARCH_KIRKWOOD=y
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_SYS_DCACHE_OFF=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_ARCH_KIRKWOOD=y
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_SYS_DCACHE_OFF=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_ARCH_KIRKWOOD=y
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
# CONFIG_SYS_THUMB_BUILD is not set
CONFIG_ARCH_OMAP2PLUS=y
CONFIG_SYS_TEXT_BASE=0x80008000
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_SYS_DCACHE_OFF=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_ARCH_KIRKWOOD=y
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_ROCKCHIP=y
CONFIG_SYS_TEXT_BASE=0x00200000
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_ARCH_EXYNOS=y
CONFIG_SYS_TEXT_BASE=0x43E00000
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_ARCH_EXYNOS=y
CONFIG_SYS_TEXT_BASE=0x43e00000
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT_ONLY=y
+CONFIG_SPL_SKIP_LOWLEVEL_INIT_ONLY=y
CONFIG_SYS_THUMB_BUILD=y
CONFIG_ARCH_DAVINCI=y
CONFIG_SYS_TEXT_BASE=0xc1080000
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_SYS_DCACHE_OFF=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_SYS_THUMB_BUILD=y
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_SYS_DCACHE_OFF=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_SYS_THUMB_BUILD=y
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_SYS_DCACHE_OFF=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_SYS_THUMB_BUILD=y
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_ROCKCHIP=y
CONFIG_SYS_TEXT_BASE=0x00200000
CONFIG_NR_DRAM_BANKS=1
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
+CONFIG_SPL_SKIP_LOWLEVEL_INIT=y
CONFIG_SYS_DCACHE_OFF=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_ARCH_EXYNOS=y
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_SYS_THUMB_BUILD=y
CONFIG_ARCH_VF610=y
CONFIG_SYS_TEXT_BASE=0x3f401000
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
+CONFIG_SPL_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_ARCH_EXYNOS=y
CONFIG_SYS_TEXT_BASE=0x23E00000
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
+CONFIG_SPL_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_ARCH_EXYNOS=y
CONFIG_SYS_TEXT_BASE=0x23E00000
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_TARGET_PG_WCOM_EXPU1=y
CONFIG_SYS_TEXT_BASE=0x60100000
CONFIG_NR_DRAM_BANKS=1
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_TARGET_PG_WCOM_SELI8=y
CONFIG_SYS_TEXT_BASE=0x60100000
CONFIG_NR_DRAM_BANKS=1
CONFIG_ARM=y
+CONFIG_SPL_SKIP_LOWLEVEL_INIT_ONLY=y
CONFIG_ARCH_ROCKCHIP=y
CONFIG_SYS_TEXT_BASE=0x00000000
CONFIG_NR_DRAM_BANKS=1
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_ROCKCHIP=y
CONFIG_SYS_TEXT_BASE=0x00200000
CONFIG_NR_DRAM_BANKS=1
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_AT91=y
CONFIG_SYS_TEXT_BASE=0x73f00000
CONFIG_TARGET_PM9G45=y
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_SYS_DCACHE_OFF=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_ARCH_KIRKWOOD=y
CONFIG_ARM=y
+CONFIG_SPL_SKIP_LOWLEVEL_INIT_ONLY=y
CONFIG_ARCH_ROCKCHIP=y
CONFIG_SYS_TEXT_BASE=0x00000000
CONFIG_NR_DRAM_BANKS=1
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_ROCKCHIP=y
CONFIG_SYS_TEXT_BASE=0x00200000
CONFIG_SPL_GPIO=y
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_ROCKCHIP=y
CONFIG_SYS_TEXT_BASE=0x00200000
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_ROCKCHIP=y
CONFIG_SYS_TEXT_BASE=0x00200000
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_ROCKCHIP=y
CONFIG_SYS_TEXT_BASE=0x00600000
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_ROCKCHIP=y
CONFIG_SYS_TEXT_BASE=0x00200000
CONFIG_SPL_GPIO=y
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_ROCKCHIP=y
CONFIG_SYS_TEXT_BASE=0x00200000
CONFIG_SPL_GPIO=y
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_ROCKCHIP=y
CONFIG_SYS_TEXT_BASE=0x00200000
CONFIG_SPL_GPIO=y
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_ROCKCHIP=y
CONFIG_SYS_TEXT_BASE=0x00200000
CONFIG_NR_DRAM_BANKS=1
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_ROCKCHIP=y
CONFIG_SYS_TEXT_BASE=0x00200000
CONFIG_NR_DRAM_BANKS=1
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_ROCKCHIP=y
CONFIG_SYS_TEXT_BASE=0x00200000
CONFIG_SPL_GPIO=y
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_ROCKCHIP=y
CONFIG_SYS_TEXT_BASE=0x00200000
CONFIG_SPL_GPIO=y
CONFIG_ARM=y
+CONFIG_SPL_SKIP_LOWLEVEL_INIT_ONLY=y
+CONFIG_TPL_SKIP_LOWLEVEL_INIT_ONLY=y
# CONFIG_SPL_USE_ARCH_MEMCPY is not set
# CONFIG_SPL_USE_ARCH_MEMSET is not set
CONFIG_ARCH_ROCKCHIP=y
CONFIG_ARM=y
+CONFIG_SPL_SKIP_LOWLEVEL_INIT_ONLY=y
CONFIG_ARCH_ROCKCHIP=y
CONFIG_SYS_TEXT_BASE=0x00000000
CONFIG_NR_DRAM_BANKS=1
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_ROCKCHIP=y
CONFIG_SYS_TEXT_BASE=0x00200000
CONFIG_SPL_GPIO=y
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_ROCKCHIP=y
CONFIG_SYS_TEXT_BASE=0x00200000
CONFIG_ENV_OFFSET=0x3F8000
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT_ONLY=y
+CONFIG_SPL_SKIP_LOWLEVEL_INIT_ONLY=y
# CONFIG_SPL_USE_ARCH_MEMCPY is not set
# CONFIG_SPL_USE_ARCH_MEMSET is not set
CONFIG_ARCH_ROCKCHIP=y
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_ROCKCHIP=y
CONFIG_SYS_TEXT_BASE=0x00200000
CONFIG_NR_DRAM_BANKS=1
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_ARCH_BCM283X=y
CONFIG_SYS_TEXT_BASE=0x00008000
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_ARCH_BCM283X=y
CONFIG_SYS_TEXT_BASE=0x00008000
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_ARCH_EXYNOS=y
CONFIG_SYS_TEXT_BASE=0x44800000
CONFIG_MIPS=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_SYS_TEXT_BASE=0x80010000
CONFIG_NR_DRAM_BANKS=1
CONFIG_ENV_SIZE=0x2000
CONFIG_DEFAULT_DEVICE_TREE="sagem,f@st1704"
CONFIG_ARCH_BMIPS=y
CONFIG_SOC_BMIPS_BCM6338=y
+CONFIG_MIPS_CACHE_SETUP=y
+CONFIG_MIPS_CACHE_DISABLE=y
# CONFIG_MIPS_BOOT_CMDLINE_LEGACY is not set
# CONFIG_MIPS_BOOT_ENV_LEGACY is not set
CONFIG_MIPS_BOOT_FDT=y
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_AT91=y
CONFIG_SYS_TEXT_BASE=0x23f00000
CONFIG_TARGET_SAM9X60EK=y
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_AT91=y
CONFIG_SYS_TEXT_BASE=0x23f00000
CONFIG_TARGET_SAM9X60EK=y
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_AT91=y
CONFIG_SYS_TEXT_BASE=0x23f00000
CONFIG_TARGET_SAM9X60EK=y
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_ARCH_AT91=y
CONFIG_SYS_TEXT_BASE=0x23f00000
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_ARCH_AT91=y
CONFIG_SYS_TEXT_BASE=0x23f00000
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_ARCH_AT91=y
CONFIG_SYS_TEXT_BASE=0x23f00000
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_ARCH_AT91=y
CONFIG_SYS_TEXT_BASE=0x23f00000
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_AT91=y
CONFIG_SYS_TEXT_BASE=0x26f00000
CONFIG_TARGET_SAMA5D27_WLSOM1_EK=y
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_AT91=y
CONFIG_SYS_TEXT_BASE=0x26f00000
CONFIG_TARGET_SAMA5D27_WLSOM1_EK=y
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_ARCH_AT91=y
CONFIG_SYS_TEXT_BASE=0x26f00000
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_ARCH_AT91=y
CONFIG_SYS_TEXT_BASE=0x26f00000
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_ARCH_AT91=y
CONFIG_SYS_TEXT_BASE=0x26f00000
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_ARCH_AT91=y
CONFIG_SYS_TEXT_BASE=0x26f00000
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_ARCH_AT91=y
CONFIG_SYS_TEXT_BASE=0x26f00000
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_ARCH_AT91=y
CONFIG_SYS_TEXT_BASE=0x26f00000
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_ARCH_AT91=y
CONFIG_SYS_TEXT_BASE=0x26f00000
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_ARCH_AT91=y
CONFIG_SYS_TEXT_BASE=0x26f00000
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_ARCH_AT91=y
CONFIG_SYS_TEXT_BASE=0x26f00000
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_ARCH_AT91=y
CONFIG_SYS_TEXT_BASE=0x26f00000
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_ARCH_AT91=y
CONFIG_SYS_TEXT_BASE=0x26f00000
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_ARCH_AT91=y
CONFIG_SYS_TEXT_BASE=0x26f00000
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_ARCH_AT91=y
CONFIG_SYS_TEXT_BASE=0x26f00000
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_ARCH_AT91=y
CONFIG_SYS_TEXT_BASE=0x26f00000
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_ARCH_AT91=y
CONFIG_SYS_TEXT_BASE=0x26f00000
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_ARCH_AT91=y
CONFIG_SYS_TEXT_BASE=0x26f00000
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_ARCH_AT91=y
CONFIG_SYS_TEXT_BASE=0x26f00000
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_ARCH_AT91=y
CONFIG_SYS_TEXT_BASE=0x26f00000
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_ARCH_AT91=y
CONFIG_SYS_TEXT_BASE=0x26f00000
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_ARCH_AT91=y
CONFIG_SYS_TEXT_BASE=0x26f00000
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_ARCH_AT91=y
CONFIG_SYS_TEXT_BASE=0x26f00000
CONFIG_MIPS=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_SYS_TEXT_BASE=0x80010000
CONFIG_NR_DRAM_BANKS=1
CONFIG_ENV_SIZE=0x2000
CONFIG_ARCH_BMIPS=y
CONFIG_SOC_BMIPS_BCM6358=y
CONFIG_BOARD_SFR_NB4_SER=y
+CONFIG_MIPS_CACHE_SETUP=y
+CONFIG_MIPS_CACHE_DISABLE=y
# CONFIG_MIPS_BOOT_CMDLINE_LEGACY is not set
# CONFIG_MIPS_BOOT_ENV_LEGACY is not set
CONFIG_MIPS_BOOT_FDT=y
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_ROCKCHIP=y
CONFIG_SYS_TEXT_BASE=0x00200000
CONFIG_NR_DRAM_BANKS=1
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_SYS_DCACHE_OFF=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_SYS_THUMB_BUILD=y
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT_ONLY=y
+CONFIG_SPL_SKIP_LOWLEVEL_INIT_ONLY=y
CONFIG_SPL_SYS_ICACHE_OFF=y
CONFIG_SPL_SYS_DCACHE_OFF=y
CONFIG_SPL_SYS_THUMB_BUILD=y
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
+CONFIG_SPL_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_CPU_INIT=y
# CONFIG_SPL_USE_ARCH_MEMCPY is not set
# CONFIG_SPL_USE_ARCH_MEMSET is not set
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
+CONFIG_SPL_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_ARCH_EXYNOS=y
CONFIG_SYS_TEXT_BASE=0x23E00000
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
+CONFIG_SPL_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_ARCH_EXYNOS=y
CONFIG_SYS_TEXT_BASE=0x43E00000
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_ARCH_AT91=y
CONFIG_SYS_TEXT_BASE=0x21f00000
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_ARCH_AT91=y
CONFIG_SYS_TEXT_BASE=0x21f00000
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
+CONFIG_SPL_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_CPU_INIT=y
# CONFIG_SPL_USE_ARCH_MEMCPY is not set
# CONFIG_SPL_USE_ARCH_MEMSET is not set
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
+CONFIG_SPL_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_CPU_INIT=y
# CONFIG_SPL_USE_ARCH_MEMCPY is not set
# CONFIG_SPL_USE_ARCH_MEMSET is not set
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_U8500=y
CONFIG_SYS_TEXT_BASE=0x100000
CONFIG_NR_DRAM_BANKS=2
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_STI=y
CONFIG_SYS_TEXT_BASE=0x7D600000
CONFIG_NR_DRAM_BANKS=1
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT_ONLY=y
+CONFIG_SPL_SKIP_LOWLEVEL_INIT_ONLY=y
CONFIG_SPL_SYS_ICACHE_OFF=y
CONFIG_SPL_SYS_DCACHE_OFF=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_OMAP2PLUS=y
CONFIG_SPL_GPIO=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_ARM=y
+CONFIG_SPL_SKIP_LOWLEVEL_INIT_ONLY=y
+CONFIG_TPL_SKIP_LOWLEVEL_INIT_ONLY=y
CONFIG_ARCH_ROCKCHIP=y
CONFIG_SYS_TEXT_BASE=0x01000000
CONFIG_SPL_GPIO=y
CONFIG_ARM=y
+CONFIG_SPL_SKIP_LOWLEVEL_INIT_ONLY=y
+CONFIG_TPL_SKIP_LOWLEVEL_INIT_ONLY=y
CONFIG_ARCH_ROCKCHIP=y
CONFIG_SYS_TEXT_BASE=0x01000000
CONFIG_SPL_GPIO=y
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_ARCH_EXYNOS=y
CONFIG_SYS_TEXT_BASE=0x43e00000
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_ARCH_EXYNOS=y
CONFIG_SYS_TEXT_BASE=0x63300000
CONFIG_ARM=y
+CONFIG_SPL_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_SPL_SYS_THUMB_BUILD=y
CONFIG_ARCH_MVEBU=y
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_ARCH_AT91=y
CONFIG_SYS_TEXT_BASE=0x23f00000
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_SYS_THUMB_BUILD=y
CONFIG_ARCH_VF610=y
CONFIG_SYS_TEXT_BASE=0x3f401000
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_SYS_THUMB_BUILD=y
CONFIG_ARCH_VF610=y
CONFIG_SYS_TEXT_BASE=0x3f401000
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_ARCH_AT91=y
CONFIG_SYS_TEXT_BASE=0x20f00000
CONFIG_MIPS=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_NR_DRAM_BANKS=1
CONFIG_ARCH_MTMIPS=y
CONFIG_SOC_MT7628=y
CONFIG_BOARD_VOCORE2=y
+CONFIG_MIPS_CACHE_SETUP=y
+CONFIG_MIPS_CACHE_DISABLE=y
CONFIG_RESTORE_EXCEPTION_VECTOR_BASE=y
CONFIG_MIPS_BOOT_FDT=y
CONFIG_ENV_VARS_UBOOT_CONFIG=y
CONFIG_ARM=y
+CONFIG_SPL_SKIP_LOWLEVEL_INIT_ONLY=y
+CONFIG_TPL_SKIP_LOWLEVEL_INIT_ONLY=y
# CONFIG_SPL_USE_ARCH_MEMCPY is not set
# CONFIG_SPL_USE_ARCH_MEMSET is not set
CONFIG_ARCH_ROCKCHIP=y
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_SYS_ICACHE_OFF=y
CONFIG_SYS_DCACHE_OFF=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_ARM=y
+CONFIG_SPL_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_ARCH_MVEBU=y
CONFIG_SYS_TEXT_BASE=0x00800000
CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_ZYNQMP_R5=y
CONFIG_SYS_TEXT_BASE=0x10000000
CONFIG_SYS_MALLOC_F_LEN=0x1000
CONFIG_ARM=y
CONFIG_SYS_CONFIG_NAME="zynq_cse"
+CONFIG_SKIP_LOWLEVEL_INIT=y
+CONFIG_SPL_SKIP_LOWLEVEL_INIT=y
CONFIG_SYS_ICACHE_OFF=y
CONFIG_SYS_DCACHE_OFF=y
CONFIG_ARCH_ZYNQ=y
CONFIG_ARM=y
CONFIG_SYS_CONFIG_NAME="zynq_cse"
+CONFIG_SKIP_LOWLEVEL_INIT=y
+CONFIG_SPL_SKIP_LOWLEVEL_INIT=y
CONFIG_SYS_ICACHE_OFF=y
CONFIG_SYS_DCACHE_OFF=y
CONFIG_ARCH_ZYNQ=y
CONFIG_ARM=y
CONFIG_SYS_CONFIG_NAME="zynq_cse"
+CONFIG_SKIP_LOWLEVEL_INIT=y
+CONFIG_SPL_SKIP_LOWLEVEL_INIT=y
CONFIG_SYS_ICACHE_OFF=y
CONFIG_SYS_DCACHE_OFF=y
CONFIG_ARCH_ZYNQ=y
CONFIG_SKIP_LOWLEVEL_INIT:
If you want to boot this system from SPI ROM and bypass e-bios (the
- other boot loader on ROM). You should undefine CONFIG_SKIP_LOWLEVEL_INIT
- in "include/configs/adp-ag101p.h".
+ other boot loader on ROM). You should enable CONFIG_SKIP_LOWLEVEL_INIT
+ when running menuconfig or similar.
Build and boot steps
--------------------
*/
#define CONFIG_FEROCEON_88FR131 1 /* CPU Core subversion */
#define CONFIG_KW88F6281 1 /* SOC Name */
-#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage.cfg
/* additions for new ARM relocation support */
*/
#define CONFIG_FEROCEON_88FR131 1 /* CPU Core subversion */
#define CONFIG_KW88F6281 1 /* SOC Name */
-#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage.cfg
/* additions for new ARM relocation support */
*/
#define CONFIG_USE_INTERRUPT
-#define CONFIG_SKIP_LOWLEVEL_INIT
-
#define CONFIG_SKIP_TRUNOFF_WATCHDOG
#define CONFIG_ARCH_MAP_SYSMEM
*/
#define CONFIG_USE_INTERRUPT
-#define CONFIG_SKIP_LOWLEVEL_INIT
-
#define CONFIG_ARCH_MAP_SYSMEM
#define CONFIG_BOOTP_SERVERIP
#define CONFIG_SYS_L2_PL310
#define CONFIG_SYS_PL310_BASE 0x48242000
-/*
- * Since SPL did pll and ddr initialization for us,
- * we don't need to do it twice.
- */
-#if !defined(CONFIG_SPL_BUILD) && !defined(CONFIG_QSPI_BOOT)
-#define CONFIG_SKIP_LOWLEVEL_INIT
-#endif
-
/*
* When building U-Boot such that there is no previous loader
* we need to call board_early_init_f. This is taken care of in
#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "tispl.bin"
#endif
-#ifndef CONFIG_CPU_V7R
-#define CONFIG_SKIP_LOWLEVEL_INIT
-#endif
-
#define CONFIG_SPL_MAX_SIZE CONFIG_SYS_K3_MAX_DOWNLODABLE_IMAGE_SIZE
#if defined(CONFIG_TARGET_AM642_A53_EVM)
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SPL_TEXT_BASE + \
#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "tispl.bin"
#endif
-#ifndef CONFIG_CPU_V7R
-#define CONFIG_SKIP_LOWLEVEL_INIT
-#endif
-
#define CONFIG_SPL_MAX_SIZE CONFIG_SYS_K3_MAX_DOWNLODABLE_IMAGE_SIZE
#define CONFIG_SYS_BOOTM_LEN SZ_64M
*/
#define CONFIG_SHEEVA_88SV331xV5 1 /* CPU Core subversion */
#define CONFIG_ARMADA100 1 /* SOC Family Name */
-#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
/*
* There is no internal RAM in ARMADA100, using DRAM
#define CONFIG_SYS_AT91_SLOW_CLOCK 32768
#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */
-#ifndef CONFIG_SPL_BUILD
-#define CONFIG_SKIP_LOWLEVEL_INIT
-#endif
-
/*
* BOOTP options
*/
#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_INITRD_TAG
-#define CONFIG_SKIP_LOWLEVEL_INIT
/* general purpose I/O */
#define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_INITRD_TAG
-#define CONFIG_SKIP_LOWLEVEL_INIT
-
#define CONFIG_ATMEL_LEGACY
/*
#define CONFIG_INITRD_TAG 1
#ifndef CONFIG_SYS_USE_BOOT_NORFLASH
-#define CONFIG_SKIP_LOWLEVEL_INIT
#else
#define CONFIG_SYS_USE_NORFLASH
#endif
#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_INITRD_TAG
-#define CONFIG_SKIP_LOWLEVEL_INIT
/* general purpose I/O */
#define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */
#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_INITRD_TAG
-#define CONFIG_SKIP_LOWLEVEL_INIT
/* LCD */
#define LCD_BPP LCD_COLOR16
#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */
#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* main clock xtal */
-#define CONFIG_SKIP_LOWLEVEL_INIT
-
#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
#define CONFIG_SETUP_MEMORY_TAGS 1
#define CONFIG_INITRD_TAG 1
#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_INITRD_TAG
-#define CONFIG_SKIP_LOWLEVEL_INIT
/* general purpose I/O */
#define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */
/*
* CPU configuration.
*/
-#define CONFIG_SKIP_LOWLEVEL_INIT
/*
* Memory configuration.
#include <asm/arch/imx-regs.h>
#include <linux/sizes.h>
-#define CONFIG_SKIP_LOWLEVEL_INIT
-
/* Enable passing of ATAGs */
#define CONFIG_CMDLINE_TAG
/* U-Boot */
#if defined(CONFIG_BMIPS_BOOT_RAM)
-#define CONFIG_SKIP_LOWLEVEL_INIT
#define CONFIG_SYS_INIT_SP_OFFSET SZ_8K
#endif
/* U-Boot */
#if defined(CONFIG_BMIPS_BOOT_RAM)
-#define CONFIG_SKIP_LOWLEVEL_INIT
#define CONFIG_SYS_INIT_SP_OFFSET SZ_8K
#endif
/* U-Boot */
#if defined(CONFIG_BMIPS_BOOT_RAM)
-#define CONFIG_SKIP_LOWLEVEL_INIT
#define CONFIG_SYS_INIT_SP_OFFSET SZ_8K
#endif
/* U-Boot */
#if defined(CONFIG_BMIPS_BOOT_RAM)
-#define CONFIG_SKIP_LOWLEVEL_INIT
#define CONFIG_SYS_INIT_SP_OFFSET SZ_8K
#endif
/* U-Boot */
#if defined(CONFIG_BMIPS_BOOT_RAM)
-#define CONFIG_SKIP_LOWLEVEL_INIT
#define CONFIG_SYS_INIT_SP_OFFSET SZ_8K
#endif
/* U-Boot */
#if defined(CONFIG_BMIPS_BOOT_RAM)
-#define CONFIG_SKIP_LOWLEVEL_INIT
#define CONFIG_SYS_INIT_SP_OFFSET SZ_8K
#endif
/* U-Boot */
#if defined(CONFIG_BMIPS_BOOT_RAM)
-#define CONFIG_SKIP_LOWLEVEL_INIT
#define CONFIG_SYS_INIT_SP_OFFSET SZ_8K
#endif
/* U-Boot */
#if defined(CONFIG_BMIPS_BOOT_RAM)
-#define CONFIG_SKIP_LOWLEVEL_INIT
#define CONFIG_SYS_INIT_SP_OFFSET SZ_8K
#endif
/* U-Boot */
#if defined(CONFIG_BMIPS_BOOT_RAM)
-#define CONFIG_SKIP_LOWLEVEL_INIT
#define CONFIG_SYS_INIT_SP_OFFSET SZ_8K
#endif
/* U-Boot */
#if defined(CONFIG_BMIPS_BOOT_RAM)
-#define CONFIG_SKIP_LOWLEVEL_INIT
#define CONFIG_SYS_INIT_SP_OFFSET SZ_8K
#endif
/* U-Boot */
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE + SZ_16M)
-#define CONFIG_SKIP_LOWLEVEL_INIT
-
#ifdef CONFIG_MTD_RAW_NAND
#define CONFIG_SYS_MAX_NAND_DEVICE 1
#define CONFIG_SYS_NAND_SELF_INIT
/* U-Boot */
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE + SZ_16M)
-#define CONFIG_SKIP_LOWLEVEL_INIT
-
#ifdef CONFIG_MTD_RAW_NAND
#define CONFIG_SYS_MAX_NAND_DEVICE 1
#define CONFIG_SYS_NAND_SELF_INIT
/* U-Boot */
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE + SZ_16M)
-#define CONFIG_SKIP_LOWLEVEL_INIT
-
#ifdef CONFIG_MTD_RAW_NAND
#define CONFIG_SYS_MAX_NAND_DEVICE 1
#define CONFIG_SYS_NAND_SELF_INIT
* Since SPL did pll and ddr initialization for us,
* we don't need to do it twice.
*/
-#if !defined(CONFIG_SPL_BUILD) && !defined(CONFIG_NOR_BOOT)
-#define CONFIG_SKIP_LOWLEVEL_INIT
-#endif /* !CONFIG_SPL_BUILD, ... */
/*
* ----------------------------------------------------------------------------
* DDR information. We say (for simplicity) that we have 1 bank,
#ifndef __CONFIG_CI20_H__
#define __CONFIG_CI20_H__
-#define CONFIG_SKIP_LOWLEVEL_INIT
-
/* Ingenic JZ4780 clock configuration. */
#define CONFIG_SYS_HZ 1000
#define CONFIG_SYS_MHZ 1200
* Since SPL did pll and ddr initialization for us,
* we don't need to do it twice.
*/
-#if !defined(CONFIG_SPL_BUILD)
-#define CONFIG_SKIP_LOWLEVEL_INIT
-#endif
#define CONFIG_HSMMC2_8BIT
#define CONFIG_SYS_FSL_CLK
-#define CONFIG_SKIP_LOWLEVEL_INIT
-
#ifdef CONFIG_VIDEO_FSL_DCU_FB
#define CONFIG_VIDEO_LOGO
#define CONFIG_VIDEO_BMP_LOGO
*/
#define CONFIG_CUSTOMER_BOARD_SUPPORT
-#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
-
/*
* TEXT_BASE needs to be below 16MiB, since this area is scrubbed
* for DDR ECC byte filling in the SPL before loading the main
#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_INITRD_TAG
-#define CONFIG_SKIP_LOWLEVEL_INIT_ONLY
/* general purpose I/O */
#define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */
#define CONFIG_SYS_OSCIN_FREQ 24000000
#define CONFIG_SYS_TIMERBASE DAVINCI_TIMER0_BASE
#define CONFIG_SYS_HZ_CLOCK clk_get(DAVINCI_AUXCLK_CLKID)
-#define CONFIG_SKIP_LOWLEVEL_INIT_ONLY
#ifdef CONFIG_MTD_NOR_FLASH
#define CONFIG_SYS_DV_NOR_BOOT_CFG (0x11)
#define CONFIG_MACH_TYPE MACH_TYPE_DEVKIT3250
-#if !defined(CONFIG_SPL_BUILD)
-#define CONFIG_SKIP_LOWLEVEL_INIT
-#endif
-
/*
* Memory configurations
*/
*/
#define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */
#define CONFIG_KW88F6281 /* SOC Name */
-#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
#include "mv-common.h"
*/
#define CONFIG_FEROCEON_88FR131 1 /* CPU Core subversion */
#define CONFIG_KW88F6281 1 /* SOC Name */
-#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
/*
* mv-common.h should be defined after CMD configs since it used them
* SoC and board defines
*/
#define CONFIG_MACH_TYPE MACH_TYPE_LPC3XXX
-#define CONFIG_SKIP_LOWLEVEL_INIT
#define CONFIG_BOARD_SIZE_LIMIT 0x000fffff /* maximum allowable size for full U-Boot binary */
/*
/* The first stage boot loader expects u-boot running at this address. */
/* The first stage boot loader takes care of low level initialization. */
-#define CONFIG_SKIP_LOWLEVEL_INIT
/* Set our official architecture number. */
#define CONFIG_MACH_TYPE MACH_TYPE_ETHERNUT5
#include <linux/sizes.h>
#include <linux/stringify.h>
-#define CONFIG_SKIP_LOWLEVEL_INIT
-
/* Keep L2 Cache Disabled */
/* input clock of PLL: 24MHz input clock */
#define CONFIG_SYS_AT91_SLOW_CLOCK 32768
#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* 12 MHz crystal */
-#ifndef CONFIG_SPL_BUILD
-#define CONFIG_SKIP_LOWLEVEL_INIT
-#endif
-#define CONFIG_SKIP_LOWLEVEL_INIT_ONLY
-
/* general purpose I/O */
#define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */
#define CONFIG_SYS_INIT_SP_OFFSET 0x400000
/* SPL */
-#if defined(CONFIG_SPL) && !defined(CONFIG_SPL_BUILD)
-#define CONFIG_SKIP_LOWLEVEL_INIT
-#endif
#define CONFIG_SYS_UBOOT_START CONFIG_SYS_TEXT_BASE
#define CONFIG_SPL_BSS_START_ADDR 0x80010000
*/
#define CONFIG_FEROCEON_88FR131 1 /* CPU Core subversion */
#define CONFIG_KW88F6281 1 /* SOC Name */
-#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
/*
* Default GPIO configuration and LED status
#define CONFIG_SYS_SDRAM_BASE 0x00000000
#define CONFIG_SYS_INIT_SP_ADDR 0x01000000
-#define CONFIG_SKIP_LOWLEVEL_INIT
#define CONFIG_EXTRA_ENV_SETTINGS \
"fdt_high=0x20000000\0" \
*/
#define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */
#define CONFIG_KW88F6281 /* SOC Name */
-#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
#include "mv-common.h"
*/
#define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */
#define CONFIG_KW88F6281 /* SOC Name */
-#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
/*
* Machine type
#define __XILFPGA_CONFIG_H
/* BootROM + MIG is pretty smart. DDR and Cache initialized */
-#define CONFIG_SKIP_LOWLEVEL_INIT
/*--------------------------------------------
* CPU configuration
* image to run at reset/power up
* e.g. whether the ARM Boot Monitor runs before U-Boot
*/
-/* #define CONFIG_SKIP_LOWLEVEL_INIT */
/*
* The ARM boot monitor does not relocate U-Boot.
"appended one; fi\0" \
""
-#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
-
/*
* For booting Linux, the board info and command line data
* have to be in the first 8 MB of memory, since this is
#define CONFIG_SYS_FSL_CLK
-#define CONFIG_SKIP_LOWLEVEL_INIT
-
/* include common defines/options for all Keymile boards */
#include "keymile-common.h"
#else
#define CONFIG_KW88F6281
#endif
-#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
/*
* SDRAM configuration
#define CONFIG_SYS_OSCIN_FREQ 24000000
#define CONFIG_SYS_TIMERBASE DAVINCI_TIMER0_BASE
#define CONFIG_SYS_HZ_CLOCK clk_get(DAVINCI_AUXCLK_CLKID)
-#define CONFIG_SKIP_LOWLEVEL_INIT
/*
* Memory Info
#define CONFIG_SYS_INIT_SP_OFFSET 0x400000
/* SPL */
-#if defined(CONFIG_SPL) && !defined(CONFIG_SPL_BUILD)
-#define CONFIG_SKIP_LOWLEVEL_INIT
-#endif
#define CONFIG_SYS_UBOOT_START CONFIG_SYS_TEXT_BASE
#define CONFIG_SPL_BSS_START_ADDR 0x80010000
#define CONFIG_SYS_CLK_FREQ 125000000
-#define CONFIG_SKIP_LOWLEVEL_INIT
-
#ifdef CONFIG_TFABOOT
#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_TEXT_BASE
#else
#define CONFIG_SYS_FSL_CLK
-#define CONFIG_SKIP_LOWLEVEL_INIT
-
#define CONFIG_DEEP_SLEEP
/*
#define CONFIG_SYS_FSL_CLK
-#define CONFIG_SKIP_LOWLEVEL_INIT
#define CONFIG_DEEP_SLEEP
/*
/* Link Definitions */
#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_TEXT_BASE
-#define CONFIG_SKIP_LOWLEVEL_INIT
-
#define CONFIG_VERY_BIG_RAM
#define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000UL
#define CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY 0
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_FSL_OCRAM_BASE + 0xfff0)
#endif
-#define CONFIG_SKIP_LOWLEVEL_INIT
-
#define CONFIG_VERY_BIG_RAM
#define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000
#define CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY 0
#define CONFIG_SYS_CLK_FREQ get_board_sys_clk()
-#define CONFIG_SKIP_LOWLEVEL_INIT
-
#define CONFIG_LAYERSCAPE_NS_ACCESS
#define CONFIG_DIMM_SLOTS_PER_CTLR 1
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_FSL_OCRAM_BASE + 0xfff0)
#endif
-#define CONFIG_SKIP_LOWLEVEL_INIT
-
#define CONFIG_VERY_BIG_RAM
#define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000
#define CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY 0
#define CONFIG_SYS_CLK_FREQ get_board_sys_clk()
-#define CONFIG_SKIP_LOWLEVEL_INIT
-
#define CONFIG_LAYERSCAPE_NS_ACCESS
#define CONFIG_DIMM_SLOTS_PER_CTLR 1
/* Link Definitions */
#define CONFIG_SYS_FSL_QSPI_BASE 0x20000000
-#define CONFIG_SKIP_LOWLEVEL_INIT
-
#define CONFIG_VERY_BIG_RAM
#define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000UL
#define CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY 0
/* Link Definitions */
-#define CONFIG_SKIP_LOWLEVEL_INIT
-
#ifndef CONFIG_SYS_FSL_DDR4
#define CONFIG_SYS_DDR_RAW_TIMING
#endif
#define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */
#define CONFIG_KW88F6281 /* SOC Name */
-#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
-
#define CONFIG_KIRKWOOD_GPIO
#include "mv-common.h"
#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_FLASH_BASE 0x20000000
-#define CONFIG_SKIP_LOWLEVEL_INIT
-
/* DDR */
#define CONFIG_FSL_DDR_INTERACTIVE /* Interactive debugging */
#define CONFIG_SYS_FSL_DDR_INTLV_256B /* force 256 byte interleaving */
#define CONFIG_SYS_AT91_MAIN_CLOCK 16000000/* 16.0 MHz crystal */
/* Misc CPU related */
-#define CONFIG_SKIP_LOWLEVEL_INIT
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_INITRD_TAG
#define CONFIG_SERIAL_TAG
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
/* SPL */
-#if defined(CONFIG_SPL) && !defined(CONFIG_SPL_BUILD)
-#define CONFIG_SKIP_LOWLEVEL_INIT
-#endif
#define CONFIG_SYS_UBOOT_START CONFIG_SYS_TEXT_BASE
#define CONFIG_SPL_BSS_START_ADDR 0x80010000
230400, 460800, 921600 }
/* SPL */
-#if defined(CONFIG_SPL) && !defined(CONFIG_SPL_BUILD)
-#define CONFIG_SKIP_LOWLEVEL_INIT
-#endif
#define CONFIG_SYS_UBOOT_START CONFIG_SYS_TEXT_BASE
#define CONFIG_SPL_BSS_START_ADDR 0x80010000
* High Level Configuration Options (easy to change)
*/
#define CONFIG_KW88F6281 1 /* SOC Name */
-#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
/*
* mv-common.h should be defined after CMD configs since it used them
* launched by OPTEE, because of that we shall skip all the low level
* initialization since it was already done by ATF or OPTEE
*/
-#if (CONFIG_OPTEE_TZDRAM_SIZE != 0)
-#ifndef CONFIG_OPTEE
-#define CONFIG_SKIP_LOWLEVEL_INIT
-#endif
-#endif
#endif
*/
#define CONFIG_FEROCEON_88FR131 /* #define CPU Core subversion */
#define CONFIG_KW88F6192 /* SOC Name */
-#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
/* power-on led, regulator, sata0, sata1 */
#define NAS220_GE_OE_VAL_LOW ((1 << 12)|(1 << 14)|(1 << 24)|(1 << 28))
#define V_OSCK 26000000 /* Clock output from T2 */
#define V_SCLK (V_OSCK >> 1)
-#define CONFIG_SKIP_LOWLEVEL_INIT /* X-Loader set everything up */
-
#define CONFIG_CMDLINE_TAG /* enable passing kernel command line string */
#define CONFIG_INITRD_TAG /* enable passing initrd */
#define CONFIG_REVISION_TAG /* enable passing revision tag*/
#define CONFIG_FEROCEON_88FR131 1 /* CPU Core subversion */
#define CONFIG_KW88F6192 1 /* SOC Name */
#define CONFIG_KW88F6702 1 /* SOC Name */
-#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
#include "mv-common.h"
#define CONFIG_SYS_TIMERBASE DAVINCI_TIMER0_BASE
#define CONFIG_SYS_HZ_CLOCK clk_get(DAVINCI_AUXCLK_CLKID)
#define CONFIG_SYS_HZ 1000
-#define CONFIG_SKIP_LOWLEVEL_INIT_ONLY
/*
* Memory Info
*/
#define CONFIG_SHEEVA_88SV131 1 /* CPU Core subversion */
#define CONFIG_KW88F6281 1 /* SOC Name */
-#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
#include "mv-common.h"
#include <linux/sizes.h>
#include <linux/stringify.h>
-#define CONFIG_SKIP_LOWLEVEL_INIT
-
/* Enable passing of ATAGs */
#define CONFIG_CMDLINE_TAG
#define CONFIG_SETUP_MEMORY_TAGS 1
#define CONFIG_INITRD_TAG 1
-#undef CONFIG_SKIP_LOWLEVEL_INIT
-
/*
* Hardware drivers
*/
#define CONFIG_SETUP_MEMORY_TAGS 1
#define CONFIG_INITRD_TAG 1
-#undef CONFIG_SKIP_LOWLEVEL_INIT
#define CONFIG_USER_LOWLEVEL_INIT 1
/*
#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_INITRD_TAG
-#define CONFIG_SKIP_LOWLEVEL_INIT
/* general purpose I/O */
#define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */
*/
#define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */
#define CONFIG_KW88F6281 /* SOC Name */
-#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
#include "mv-common.h"
#include "rockchip-common.h"
#define CONFIG_SYS_CBSIZE 1024
-#define CONFIG_SKIP_LOWLEVEL_INIT
#define CONFIG_SYS_NS16550_MEM32
#include "rockchip-common.h"
#define CONFIG_SYS_CBSIZE 1024
-#define CONFIG_SKIP_LOWLEVEL_INIT
#define CONFIG_ROCKCHIP_STIMER_BASE 0x200440a0
#define COUNTER_FREQUENCY 24000000
#define CONFIG_SYS_MAXARGS 16
#define CONFIG_SYS_CBSIZE 1024
-#define CONFIG_SKIP_LOWLEVEL_INIT
#define CONFIG_ROCKCHIP_STIMER_BASE 0x200440a0
#define COUNTER_FREQUENCY 24000000
#include <asm/arch-rockchip/hardware.h>
#include "rockchip-common.h"
-#define CONFIG_SKIP_LOWLEVEL_INIT_ONLY
#define CONFIG_SYS_CBSIZE 1024
#ifdef CONFIG_SPL_ROCKCHIP_BACK_TO_BROM
#include <asm/arch-rockchip/hardware.h>
#include "rockchip-common.h"
-#define CONFIG_SKIP_LOWLEVEL_INIT
#define CONFIG_SYS_CBSIZE 1024
#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* 64M */
#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* 64MB */
-#define CONFIG_SKIP_LOWLEVEL_INIT_ONLY
#define CONFIG_SYS_CBSIZE 1024
#define CONFIG_ROCKCHIP_STIMER_BASE 0xff810020
#include "rockchip-common.h"
#define CONFIG_SYS_CBSIZE 1024
-#define CONFIG_SKIP_LOWLEVEL_INIT
#define CONFIG_SYS_MAX_NAND_DEVICE 1
#define CONFIG_SYS_NAND_ONFI_DETECTION
#define CONFIG_SYS_NAND_PAGE_SIZE 2048
#define COUNTER_FREQUENCY 24000000
#define CONFIG_SYS_CBSIZE 1024
-#define CONFIG_SKIP_LOWLEVEL_INIT
#define CONFIG_SYS_INIT_SP_ADDR 0x00300000
#define CONFIG_SPL_STACK 0x00400000
#define CONFIG_SYS_SDRAM_BASE 0
#define SDRAM_MAX_SIZE 0xff000000
#define CONFIG_SYS_CBSIZE 1024
-#define CONFIG_SKIP_LOWLEVEL_INIT
#define CONFIG_ROCKCHIP_STIMER_BASE 0xff830020
#define COUNTER_FREQUENCY 24000000
#include "rockchip-common.h"
#define CONFIG_SYS_CBSIZE 1024
-#define CONFIG_SKIP_LOWLEVEL_INIT
#define COUNTER_FREQUENCY 24000000
#define CONFIG_ROCKCHIP_STIMER_BASE 0xff8680a0
#include "rockchip-common.h"
#define CONFIG_SYS_CBSIZE 1024
-#define CONFIG_SKIP_LOWLEVEL_INIT
#define COUNTER_FREQUENCY 24000000
#define CONFIG_ROCKCHIP_STIMER_BASE 0xfdd1c020
#include <asm/arch/base.h>
#endif
-#if defined(CONFIG_TARGET_RPI_2) || defined(CONFIG_TARGET_RPI_3_32B)
-#define CONFIG_SKIP_LOWLEVEL_INIT
-#endif
-
/* Architecture, CPU, etc.*/
/* Use SoC timer for AArch32, but architected timer for AArch64 */
#define CONFIG_IRAM_BASE 0x10080000
#define CONFIG_SYS_CBSIZE 1024
-#define CONFIG_SKIP_LOWLEVEL_INIT
#define CONFIG_SYS_TIMER_RATE (24 * 1000 * 1000)
/* TIMER1,initialized by ddr initialize code */
#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_INITRD_TAG
-#define CONFIG_SKIP_LOWLEVEL_INIT
#define CONFIG_USART_BASE ATMEL_BASE_DBGU
#define CONFIG_USART_ID 0 /* ignored in arm */
* Since SPL did pll and ddr initialization for us,
* we don't need to do it twice.
*/
-#ifndef CONFIG_SPL_BUILD
-#define CONFIG_SKIP_LOWLEVEL_INIT
-#endif
#ifndef CONFIG_SPL_BUILD
/*
#define CONFIG_CMDLINE_TAG /* pass commandline to Kernel */
#define CONFIG_SETUP_MEMORY_TAGS /* pass memory defs to kernel */
#define CONFIG_INITRD_TAG /* pass initrd param to kernel */
-#define CONFIG_SKIP_LOWLEVEL_INIT_ONLY /* U-Boot is loaded by a bootloader */
/* We set the max number of command args high to avoid HUSH bugs. */
#define CONFIG_SYS_MAXARGS 32
#define S5P_CHECK_LPA 0xABAD0000
/* MMC SPL */
-#define CONFIG_SKIP_LOWLEVEL_INIT
#define COPY_BL2_FNPTR_ADDR 0x00002488
#define CONFIG_BOOTCOMMAND "fatload mmc 0 40007000 uImage; bootm 40007000"
#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_INITRD_TAG
-#define CONFIG_SKIP_LOWLEVEL_INIT
/* SDRAM */
#define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_CS1
#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_INITRD_TAG
-#define CONFIG_SKIP_LOWLEVEL_INIT_ONLY
/* SDRAM */
#define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_CS6
* low-level initialization and rely on configuration provided by the Samsung
* bootloader. New images are loaded at the same address for compatibility.
*/
-#define CONFIG_SKIP_LOWLEVEL_INIT
#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_MALLOC_LEN SZ_2M
#define CONFIG_SYS_MAX_FLASH_BANKS 1
-#define CONFIG_SKIP_LOWLEVEL_INIT
-
/* USB Configs */
#define CONFIG_USB_OHCI_NEW
#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_INITRD_TAG
-#define CONFIG_SKIP_LOWLEVEL_INIT_ONLY
-
/* general purpose I/O */
#define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */
#define CONFIG_AT91_GPIO_PULLUP 1 /* keep pullups on peripheral pins */
/* overrides for SPL build here */
#ifdef CONFIG_SPL_BUILD
-#define CONFIG_SKIP_LOWLEVEL_INIT_ONLY
-
/* remove USB */
#ifdef CONFIG_USB_EHCI_TEGRA
#undef CONFIG_USB_EHCI_TEGRA
* Since SPL did pll and ddr initialization for us,
* we don't need to do it twice.
*/
-#ifndef CONFIG_SPL_BUILD
-#define CONFIG_SKIP_LOWLEVEL_INIT
-#endif
/* Ethernet */
#define CONFIG_NET_RETRY_COUNT 10
/* Since SPL did pll and ddr initialization for us,
* we don't need to do it twice.
*/
-#ifndef CONFIG_SPL_BUILD
-#define CONFIG_SKIP_LOWLEVEL_INIT
-#endif
/*
* Disable MMC DM for SPL build and can be re-enabled after adding
* Since SPL did pll and ddr initialization for us,
* we don't need to do it twice.
*/
-#if !defined(CONFIG_SPL_BUILD) && !defined(CONFIG_NOR_BOOT)
-#define CONFIG_SKIP_LOWLEVEL_INIT
-#endif
/*
* When building U-Boot such that there is no previous loader
#define CONFIG_SOC_KEYSTONE
/* U-Boot Build Configuration */
-#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is a 2nd stage loader */
/* SoC Configuration */
#define CONFIG_SPL_TARGET "u-boot-spi.gph"
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_INITRD_TAG
-#define CONFIG_SKIP_LOWLEVEL_INIT
-
/*
* Hardware drivers
*/
#define CONFIG_MACH_TYPE 4146
-#define CONFIG_SKIP_LOWLEVEL_INIT
-
/* Enable passing of ATAGs */
#define CONFIG_CMDLINE_TAG
#define CONFIG_SYS_INIT_SP_OFFSET 0x400000
/* SPL */
-#if defined(CONFIG_SPL) && !defined(CONFIG_SPL_BUILD)
-#define CONFIG_SKIP_LOWLEVEL_INIT
-#endif
#define CONFIG_SYS_UBOOT_START CONFIG_SYS_TEXT_BASE
#define CONFIG_SPL_BSS_START_ADDR 0x80010000
*/
#define CONFIG_MACH_TYPE 736
-#if !defined(CONFIG_SPL_BUILD)
-#define CONFIG_SKIP_LOWLEVEL_INIT
-#endif
-
/*
* Memory configurations
*/
/* Extend size of kernel image for uncompression */
#define CONFIG_SYS_BOOTM_LEN (60 * 1024 * 1024)
-#define CONFIG_SKIP_LOWLEVEL_INIT
-
#endif /* __CONFIG_ZYNQ_ZYNQMP_R5_H */
#ifndef __CONFIG_ZYNQ_CSE_H
#define __CONFIG_ZYNQ_CSE_H
-#define CONFIG_SKIP_LOWLEVEL_INIT
-
#include <configs/zynq-common.h>
/* Undef unneeded configs */
CONFIG_SH_SDRAM_OFFSET
CONFIG_SIEMENS_MACH_TYPE
CONFIG_SKIP_LOCAL_MAC_RANDOMIZATION
-CONFIG_SKIP_LOWLEVEL_INIT
-CONFIG_SKIP_LOWLEVEL_INIT_ONLY
CONFIG_SKIP_TRUNOFF_WATCHDOG
CONFIG_SLIC
CONFIG_SLTTMR
projects / u-boot.git / commitdiff