gpio: mxc_gpio: add OF_PLATDATA support

Continuing with the OF_PLATADATA support for iMX6 to reduce SPL
footprint, add it to mxc_gpio. Thanks to this, it will be possible to
enable card detection on MMC driver.

Signed-off-by: Walter Lozano <walter.lozano@collabora.com>

diff --git a/drivers/gpio/mxc_gpio.c b/drivers/gpio/mxc_gpio.c
index 90d36fb87bb116451ee88a725756c288bc81e430..fc7d296a2c16da345633dfc36670719be38b8b87 100644 (file)
--- a/drivers/gpio/mxc_gpio.c
+++ b/drivers/gpio/mxc_gpio.c
@@ -13,6 +13,8 @@
 #include <asm/arch/imx-regs.h>
 #include <asm/gpio.h>
 #include <asm/io.h>
+#include <dt-structs.h>
+#include <mapmem.h>
 
 enum mxc_gpio_direction {
        MXC_GPIO_DIRECTION_IN,
@@ -22,6 +24,10 @@ enum mxc_gpio_direction {
 #define GPIO_PER_BANK                  32
 
 struct mxc_gpio_plat {
+#if CONFIG_IS_ENABLED(OF_PLATDATA)
+       /* Put this first since driver model will copy the data here */
+       struct dtd_gpio_mxc dtplat;
+#endif
        int bank_index;
        struct gpio_regs *regs;
 };
@@ -280,6 +286,12 @@ static int mxc_gpio_probe(struct udevice *dev)
        int banknum;
        char name[18], *str;
 
+#if CONFIG_IS_ENABLED(OF_PLATDATA)
+       struct dtd_gpio_mxc *dtplat = &plat->dtplat;
+
+       plat->regs = map_sysmem(dtplat->reg[0], dtplat->reg[1]);
+#endif
+
        banknum = plat->bank_index;
        if (IS_ENABLED(CONFIG_ARCH_IMX8))
                sprintf(name, "GPIO%d_", banknum);
@@ -297,14 +309,15 @@ static int mxc_gpio_probe(struct udevice *dev)
 
 static int mxc_gpio_ofdata_to_platdata(struct udevice *dev)
 {
-       fdt_addr_t addr;
        struct mxc_gpio_plat *plat = dev_get_platdata(dev);
+       if (!CONFIG_IS_ENABLED(OF_PLATDATA)) {
+               fdt_addr_t addr;
+               addr = devfdt_get_addr(dev);
+               if (addr == FDT_ADDR_T_NONE)
+                       return -EINVAL;
 
-       addr = devfdt_get_addr(dev);
-       if (addr == FDT_ADDR_T_NONE)
-               return -EINVAL;
-
-       plat->regs = (struct gpio_regs *)addr;
+               plat->regs = (struct gpio_regs *)addr;
+       }
        plat->bank_index = dev->req_seq;
 
        return 0;
@@ -332,6 +345,8 @@ U_BOOT_DRIVER(gpio_mxc) = {
        .bind   = mxc_gpio_bind,
 };
 
+U_BOOT_DRIVER_ALIAS(gpio_mxc, fsl_imx6q_gpio)
+
 #if !CONFIG_IS_ENABLED(OF_CONTROL)
 static const struct mxc_gpio_plat mxc_plat[] = {
        { 0, (struct gpio_regs *)GPIO1_BASE_ADDR },