nand/fsl_ifc: Convert to self-init

Convert NAND IFC driver to support CONFIG_SYS_NAND_SELF_INIT.

Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>

diff --git a/drivers/mtd/nand/fsl_ifc_nand.c b/drivers/mtd/nand/fsl_ifc_nand.c
index b13d8a9303a9bea0410c0d9e039926366d5ab7c4..49cfb335690f3f76fd0904e8879439eaaef0d891 100644 (file)
--- a/drivers/mtd/nand/fsl_ifc_nand.c
+++ b/drivers/mtd/nand/fsl_ifc_nand.c
@@ -21,6 +21,7 @@
 
 #include <common.h>
 #include <malloc.h>
+#include <nand.h>
 
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
@@ -41,7 +42,6 @@ struct fsl_ifc_ctrl;
 
 /* mtd information per set */
 struct fsl_ifc_mtd {
-       struct mtd_info mtd;
        struct nand_chip chip;
        struct fsl_ifc_ctrl *ctrl;
 
@@ -794,11 +794,14 @@ static void fsl_ifc_sram_init(void)
        out_be32(&ifc_ctrl->regs->csor_cs[cs].csor_ext, csor_ext);
 }
 
-int board_nand_init(struct nand_chip *nand)
+static int fsl_ifc_chip_init(int devnum, u8 *addr)
 {
+       struct mtd_info *mtd = &nand_info[devnum];
+       struct nand_chip *nand;
        struct fsl_ifc_mtd *priv;
        struct nand_ecclayout *layout;
        uint32_t cspr = 0, csor = 0, ver = 0;
+       int ret;
 
        if (!ifc_ctrl) {
                fsl_ifc_ctrl_init();
@@ -811,18 +814,18 @@ int board_nand_init(struct nand_chip *nand)
                return -ENOMEM;
 
        priv->ctrl = ifc_ctrl;
-       priv->vbase = nand->IO_ADDR_R;
+       priv->vbase = addr;
 
        /* Find which chip select it is connected to.
         */
        for (priv->bank = 0; priv->bank < MAX_BANKS; priv->bank++) {
-               phys_addr_t base_addr = virt_to_phys(nand->IO_ADDR_R);
+               phys_addr_t phys_addr = virt_to_phys(addr);
 
                cspr = in_be32(&ifc_ctrl->regs->cspr_cs[priv->bank].cspr);
                csor = in_be32(&ifc_ctrl->regs->csor_cs[priv->bank].csor);
 
                if ((cspr & CSPR_V) && (cspr & CSPR_MSEL) == CSPR_MSEL_NAND &&
-                   (cspr & CSPR_BA) == CSPR_PHYS_ADDR(base_addr)) {
+                   (cspr & CSPR_BA) == CSPR_PHYS_ADDR(phys_addr)) {
                        ifc_ctrl->cs_nand = priv->bank << IFC_NAND_CSEL_SHIFT;
                        break;
                }
@@ -835,6 +838,9 @@ int board_nand_init(struct nand_chip *nand)
                return -ENODEV;
        }
 
+       nand = &priv->chip;
+       mtd->priv = nand;
+
        ifc_ctrl->chips[priv->bank] = priv;
 
        /* fill in nand_chip structure */
@@ -921,5 +927,31 @@ int board_nand_init(struct nand_chip *nand)
        if (ver == FSL_IFC_V1_1_0)
                fsl_ifc_sram_init();
 
+       ret = nand_scan_ident(mtd, 1, NULL);
+       if (ret)
+               return ret;
+
+       ret = nand_scan_tail(mtd);
+       if (ret)
+               return ret;
+
+       ret = nand_register(devnum);
+       if (ret)
+               return ret;
        return 0;
 }
+
+#ifndef CONFIG_SYS_NAND_BASE_LIST
+#define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE }
+#endif
+
+static unsigned long base_address[CONFIG_SYS_MAX_NAND_DEVICE] =
+       CONFIG_SYS_NAND_BASE_LIST;
+
+void board_nand_init(void)
+{
+       int i;
+
+       for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++)
+               fsl_ifc_chip_init(i, (u8 *)base_address[i]);
+}

diff --git a/include/nand.h b/include/nand.h
index f0f3bf94b555d4c6055d65cdc81d30c264cdd9a9..4f965235b6e035afc5fd1b53f4b1a93d3e454e02 100644 (file)
--- a/include/nand.h
+++ b/include/nand.h
@@ -31,7 +31,8 @@
  * at the same time, so do it here.  When all drivers are
  * converted, this will go away.
  */
-#if defined(CONFIG_NAND_FSL_ELBC) || defined(CONFIG_NAND_ATMEL)
+#if defined(CONFIG_NAND_FSL_ELBC) || defined(CONFIG_NAND_ATMEL)\
+       || defined(CONFIG_NAND_FSL_IFC)
 #define CONFIG_SYS_NAND_SELF_INIT
 #endif