]> git.dujemihanovic.xyz Git - u-boot.git/commitdiff
mips: bmips: add NeufBox 4 (Sercomm) board
authorÁlvaro Fernández Rojas <noltari@gmail.com>
Sun, 7 May 2017 18:11:32 +0000 (20:11 +0200)
committerDaniel Schwierzeck <daniel.schwierzeck@gmail.com>
Wed, 10 May 2017 14:16:09 +0000 (16:16 +0200)
This serves as an example for bcm6358-leds.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
arch/mips/dts/sfr,nb4-ser.dts [new file with mode: 0644]
board/sfr/nb4_ser/Kconfig [new file with mode: 0644]
board/sfr/nb4_ser/MAINTAINERS [new file with mode: 0644]
board/sfr/nb4_ser/Makefile [new file with mode: 0644]
board/sfr/nb4_ser/nb4-ser.c [new file with mode: 0644]
configs/sfr_nb4-ser_ram_defconfig [new file with mode: 0644]
include/configs/sfr_nb4_ser.h [new file with mode: 0644]

diff --git a/arch/mips/dts/sfr,nb4-ser.dts b/arch/mips/dts/sfr,nb4-ser.dts
new file mode 100644 (file)
index 0000000..f2092e9
--- /dev/null
@@ -0,0 +1,93 @@
+/*
+ * Copyright (C) 2017 Álvaro Fernández Rojas <noltari@gmail.com>
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+
+/dts-v1/;
+
+#include "brcm,bcm6358.dtsi"
+
+/ {
+       model = "SFR NeufBox 4 (Sercomm) Board";
+       compatible = "sfr,nb4-ser", "brcm,bcm6358";
+
+       aliases {
+               serial0 = &uart0;
+       };
+
+       chosen {
+               stdout-path = "serial0:115200n8";
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+
+               traffic_white {
+                       label = "NB4-SER:white:traffic";
+                       gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+               };
+
+               service_blue {
+                       label = "NB4-SER:blue:service";
+                       gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
+               };
+
+               wifi_white {
+                       label = "NB4-SER:white:wifi";
+                       gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
+               };
+
+               service_red {
+                       label = "NB4-SER:red:service";
+                       gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
+               };
+
+               service_green {
+                       label = "NB4-SER:green:service";
+                       gpios = <&gpio0 30 GPIO_ACTIVE_LOW>;
+               };
+       };
+};
+
+&gpio0 {
+       status = "okay";
+};
+
+&leds {
+       status = "okay";
+       brcm,clk-div = <1>;
+
+       led@0 {
+               reg = <0>;
+               active-low;
+               label = "NB4-SER:white:alarm";
+       };
+
+       led@2 {
+               reg = <2>;
+               active-low;
+               label = "NB4-SER:white:tv";
+       };
+
+       led@3 {
+               reg = <3>;
+               active-low;
+               label = "NB4-SER:white:tel";
+       };
+
+       led@4 {
+               reg = <4>;
+               active-low;
+               label = "NB4-SER:white:adsl";
+       };
+};
+
+&pflash {
+       status = "okay";
+};
+
+&uart0 {
+       u-boot,dm-pre-reloc;
+       status = "okay";
+};
diff --git a/board/sfr/nb4_ser/Kconfig b/board/sfr/nb4_ser/Kconfig
new file mode 100644 (file)
index 0000000..78aefb5
--- /dev/null
@@ -0,0 +1,12 @@
+if BOARD_SFR_NB4_SER
+
+config SYS_BOARD
+       default "nb4_ser"
+
+config SYS_VENDOR
+       default "sfr"
+
+config SYS_CONFIG_NAME
+       default "sfr_nb4_ser"
+
+endif
diff --git a/board/sfr/nb4_ser/MAINTAINERS b/board/sfr/nb4_ser/MAINTAINERS
new file mode 100644 (file)
index 0000000..bf80267
--- /dev/null
@@ -0,0 +1,6 @@
+SFR NEUFBOX 4 SERCOMM BOARD
+M:     Álvaro Fernández Rojas <noltari@gmail.com>
+S:     Maintained
+F:     board/sfr/nb4_ser/
+F:     include/configs/sfr_nb4_ser.h
+F:     configs/sfr_nb4-ser_ram_defconfig
diff --git a/board/sfr/nb4_ser/Makefile b/board/sfr/nb4_ser/Makefile
new file mode 100644 (file)
index 0000000..f3b1404
--- /dev/null
@@ -0,0 +1,5 @@
+#
+# SPDX-License-Identifier:     GPL-2.0+
+#
+
+obj-y += nb4-ser.o
diff --git a/board/sfr/nb4_ser/nb4-ser.c b/board/sfr/nb4_ser/nb4-ser.c
new file mode 100644 (file)
index 0000000..d181ca6
--- /dev/null
@@ -0,0 +1,7 @@
+/*
+ * Copyright (C) 2017 Álvaro Fernández Rojas <noltari@gmail.com>
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+
+#include <common.h>
diff --git a/configs/sfr_nb4-ser_ram_defconfig b/configs/sfr_nb4-ser_ram_defconfig
new file mode 100644 (file)
index 0000000..8b885e3
--- /dev/null
@@ -0,0 +1,52 @@
+CONFIG_ARCH_BMIPS=y
+CONFIG_BAUDRATE=115200
+CONFIG_BCM6345_GPIO=y
+CONFIG_BCM6345_SERIAL=y
+CONFIG_BMIPS_BOOT_RAM=y
+CONFIG_BOARD_SFR_NB4_SER=y
+CONFIG_CFI_FLASH=y
+# CONFIG_CMD_BOOTD is not set
+CONFIG_CMD_BOOTM=y
+CONFIG_CMD_CPU=y
+# CONFIG_CMD_CRC32 is not set
+# CONFIG_CMD_EDITENV is not set
+# CONFIG_CMD_ELF is not set
+# CONFIG_CMD_ENV_EXISTS is not set
+# CONFIG_CMD_EXPORTENV is not set
+CONFIG_CMD_FLASH=y
+# CONFIG_CMD_FPGA is not set
+# CONFIG_CMD_GPIO is not set
+# CONFIG_CMD_IMLS is not set
+# CONFIG_CMD_IMPORTENV is not set
+CONFIG_CMD_LED=y
+CONFIG_CMD_LICENSE=y
+CONFIG_CMD_LOADB=y
+# CONFIG_CMD_LOADS is not set
+CONFIG_CMD_MEMINFO=y
+# CONFIG_CMD_MISC is not set
+# CONFIG_CMD_NET is not set
+# CONFIG_CMD_NFS is not set
+# CONFIG_CMD_SAVEENV is not set
+# CONFIG_CMD_XIMG is not set
+CONFIG_DEFAULT_DEVICE_TREE="sfr,nb4-ser"
+CONFIG_DISPLAY_CPUINFO=y
+# CONFIG_DM_DEVICE_REMOVE is not set
+CONFIG_DM_GPIO=y
+CONFIG_DM_SERIAL=y
+CONFIG_HUSH_PARSER=y
+CONFIG_LED=y
+CONFIG_LED_BCM6358=y
+CONFIG_LED_GPIO=y
+CONFIG_MIPS=y
+# CONFIG_MIPS_BOOT_CMDLINE_LEGACY is not set
+# CONFIG_MIPS_BOOT_ENV_LEGACY is not set
+CONFIG_MIPS_BOOT_FDT=y
+CONFIG_MTD=y
+CONFIG_MTD_DEVICE=y
+CONFIG_MTD_NOR_FLASH=y
+CONFIG_OF_STDOUT_VIA_ALIAS=y
+CONFIG_SOC_BMIPS_BCM6358=y
+# CONFIG_SPL_SERIAL_PRESENT is not set
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SYS_PROMPT="NB4-SER # "
+CONFIG_SYS_TEXT_BASE=0x80010000
diff --git a/include/configs/sfr_nb4_ser.h b/include/configs/sfr_nb4_ser.h
new file mode 100644 (file)
index 0000000..ab64518
--- /dev/null
@@ -0,0 +1,20 @@
+/*
+ * Copyright (C) 2017 Álvaro Fernández Rojas <noltari@gmail.com>
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+
+#include <configs/bmips_common.h>
+#include <configs/bmips_bcm6358.h>
+
+#define CONFIG_REMAKE_ELF
+
+#define CONFIG_ENV_IS_NOWHERE
+#define CONFIG_ENV_SIZE                        (8 * 1024)
+
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_SYS_LONGHELP
+
+#define CONFIG_SYS_FLASH_CFI           1
+#define CONFIG_FLASH_CFI_DRIVER                1