ARM: zynq: DT: Use the right names for nodes

Based on SPEC you right names with addresses.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

diff --git a/arch/arm/dts/zynq-7000.dtsi b/arch/arm/dts/zynq-7000.dtsi
index 920715989e9502d73ed3dbe4635ecce3b932580a..6faac4044627ec064a3bd0c0739e2725b624a920 100644 (file)
--- a/arch/arm/dts/zynq-7000.dtsi
+++ b/arch/arm/dts/zynq-7000.dtsi
@@ -51,7 +51,7 @@
                interrupt-parent = <&intc>;
                ranges;
 
-               i2c0: zynq-i2c@e0004000 {
+               i2c0: i2c@e0004000 {
                        compatible = "cdns,i2c-r1p10";
                        status = "disabled";
                        clocks = <&clkc 38>;
@@ -62,7 +62,7 @@
                        #size-cells = <0>;
                };
 
-               i2c1: zynq-i2c@e0005000 {
+               i2c1: i2c@e0005000 {
                        compatible = "cdns,i2c-r1p10";
                        status = "disabled";
                        clocks = <&clkc 39>;
@@ -82,7 +82,7 @@
                              <0xF8F00100 0x100>;
                };
 
-               L2: cache-controller {
+               L2: cache-controller@f8f02000 {
                        compatible = "arm,pl310-cache";
                        reg = <0xF8F02000 0x1000>;
                        arm,data-latency = <3 2 2>;
@@ -91,7 +91,7 @@
                        cache-level = <2>;
                };
 
-               uart0: uart@e0000000 {
+               uart0: serial@e0000000 {
                        compatible = "xlnx,xuartps";
                        status = "disabled";
                        clocks = <&clkc 23>, <&clkc 40>;
@@ -100,7 +100,7 @@
                        interrupts = <0 27 4>;
                };
 
-               uart1: uart@e0001000 {
+               uart1: serial@e0001000 {
                        compatible = "xlnx,xuartps";
                        status = "disabled";
                        clocks = <&clkc 24>, <&clkc 41>;
@@ -153,7 +153,7 @@
                        clock-names = "pclk", "hclk", "tx_clk";
                };
 
-               sdhci0: ps7-sdhci@e0100000 {
+               sdhci0: sdhci@e0100000 {
                        compatible = "arasan,sdhci-8.9a";
                        status = "disabled";
                        clock-names = "clk_xin", "clk_ahb";
@@ -163,7 +163,7 @@
                        reg = <0xe0100000 0x1000>;
                } ;
 
-               sdhci1: ps7-sdhci@e0101000 {
+               sdhci1: sdhci@e0101000 {
                        compatible = "arasan,sdhci-8.9a";
                        status = "disabled";
                        clock-names = "clk_xin", "clk_ahb";
@@ -207,7 +207,7 @@
                        clocks = <&clkc 4>;
                };
 
-               ttc0: ttc0@f8001000 {
+               ttc0: timer@f8001000 {
                        interrupt-parent = <&intc>;
                        interrupts = < 0 10 4 0 11 4 0 12 4 >;
                        compatible = "cdns,ttc";
@@ -215,14 +215,14 @@
                        reg = <0xF8001000 0x1000>;
                };
 
-               ttc1: ttc1@f8002000 {
+               ttc1: timer@f8002000 {
                        interrupt-parent = <&intc>;
                        interrupts = < 0 37 4 0 38 4 0 39 4 >;
                        compatible = "cdns,ttc";
                        clocks = <&clkc 6>;
                        reg = <0xF8002000 0x1000>;
                };
-               scutimer: scutimer@f8f00600 {
+               scutimer: timer@f8f00600 {
                        interrupt-parent = <&intc>;
                        interrupts = < 1 13 0x301 >;
                        compatible = "arm,cortex-a9-twd-timer";