xilinx: Enable FRU command for all ARM based platforms

Enable it by default for board detection.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

diff --git a/configs/xilinx_versal_virt_defconfig b/configs/xilinx_versal_virt_defconfig
index b6ca566ed8cdf6ae2f4ef5e9a383a998a204a473..34ff8ddde0c177c7015174d4da4a036d939c930d 100644 (file)
--- a/configs/xilinx_versal_virt_defconfig
+++ b/configs/xilinx_versal_virt_defconfig
@@ -4,6 +4,7 @@ CONFIG_ARCH_VERSAL=y
 CONFIG_SYS_TEXT_BASE=0x8000000
 CONFIG_SYS_MALLOC_F_LEN=0x100000
 CONFIG_DM_GPIO=y
+CONFIG_CMD_FRU=y
 CONFIG_DEFINE_TCM_OCM_MMAP=y
 CONFIG_COUNTER_FREQUENCY=100000000
 CONFIG_DISTRO_DEFAULTS=y

diff --git a/configs/xilinx_zynq_virt_defconfig b/configs/xilinx_zynq_virt_defconfig
index df3da763c5004aaab6dd1731e41bf7c02541ae47..439a4fe6e53982e6210e5a87561890fe5d014c54 100644 (file)
--- a/configs/xilinx_zynq_virt_defconfig
+++ b/configs/xilinx_zynq_virt_defconfig
@@ -6,6 +6,7 @@ CONFIG_SYS_SPI_U_BOOT_OFFS=0x100000
 CONFIG_DM_GPIO=y
 CONFIG_SPL_STACK_R_ADDR=0x200000
 CONFIG_SPL=y
+CONFIG_CMD_FRU=y
 CONFIG_DEFAULT_DEVICE_TREE="zynq-zc706"
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_SYS_CUSTOM_LDSCRIPT=y

diff --git a/configs/xilinx_zynqmp_virt_defconfig b/configs/xilinx_zynqmp_virt_defconfig
index 01b2f18a057a3b25d41b8fe4f4778279018c71a5..8937658a25d5e8b01a3a7184b6553c035cdee3fd 100644 (file)
--- a/configs/xilinx_zynqmp_virt_defconfig
+++ b/configs/xilinx_zynqmp_virt_defconfig
@@ -9,6 +9,7 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI_SUPPORT=y
 CONFIG_ZYNQ_MAC_IN_EEPROM=y
 CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET=0x20
+CONFIG_CMD_FRU=y
 CONFIG_ZYNQMP_USB=y
 CONFIG_DEFAULT_DEVICE_TREE="zynqmp-zcu100-revC"
 CONFIG_AHCI=y