$(obj)board/netstar/{eeprom,crcek,crcit,*.srec,*.bin} \
$(obj)board/trab/trab_fkt $(obj)board/voiceblue/eeprom \
$(obj)board/armltd/{integratorap,integratorcp}/u-boot.lds \
- $(obj)board/bf5{18f,26,27,33,38f,48,61}-ez{brd,kit}/u-boot.lds \
- $(obj)board/bf5{33,37}-stamp/u-boot.lds \
- $(obj)board/{bf537-{minotaur,pnav,srv1},blackstamp}/u-boot.lds \
- $(obj)board/{,t}cm-bf5{27,33,37e,48,61}/u-boot.lds \
- $(obj)board/ibf-dsp561/u-boot.lds \
+ $(obj)lib_blackfin/u-boot.lds \
$(obj)cpu/blackfin/bootrom-asm-offsets.[chs]
@rm -f $(obj)include/bmp_logo.h
@rm -f $(obj)nand_spl/{u-boot-spl,u-boot-spl.map,System.map}
endif
LDR_FLAGS += $(LDR_FLAGS-y)
+
+ifeq ($(wildcard $(TOPDIR)/board/$(BOARD)/u-boot.lds*),)
+LDSCRIPT = $(obj)lib_$(ARCH)/u-boot.lds
+endif
+++ /dev/null
-/u-boot.lds
OBJS := $(addprefix $(obj),$(COBJS-y))
SOBJS := $(addprefix $(obj),$(SOBJS-y))
-$(LIB): $(obj).depend $(OBJS) $(SOBJS) $(obj)u-boot.lds
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
-$(obj)u-boot.lds: u-boot.lds.S
- $(CPP) $(CPPFLAGS) -D__ASSEMBLY__ -P $^ > $@
-
clean:
rm -f $(SOBJS) $(OBJS)
# This is not actually used for Blackfin boards so do not change it
#TEXT_BASE = do-not-use-me
-LDSCRIPT = $(obj)board/$(BOARDDIR)/u-boot.lds
-
# Set some default LDR flags based on boot mode.
LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))
+++ /dev/null
-/*
- * U-boot - u-boot.lds.S
- *
- * Copyright (c) 2005-2008 Analog Device Inc.
- *
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <asm/blackfin.h>
-#undef ALIGN
-#undef ENTRY
-#undef bfin
-
-/* If we don't actually load anything into L1 data, this will avoid
- * a syntax error. If we do actually load something into L1 data,
- * we'll get a linker memory load error (which is what we'd want).
- * This is here in the first place so we can quickly test building
- * for different CPU's which may lack non-cache L1 data.
- */
-#ifndef L1_DATA_B_SRAM
-# define L1_DATA_B_SRAM CONFIG_SYS_MONITOR_BASE
-# define L1_DATA_B_SRAM_SIZE 0
-#endif
-
-OUTPUT_ARCH(bfin)
-
-MEMORY
-{
- ram : ORIGIN = CONFIG_SYS_MONITOR_BASE, LENGTH = CONFIG_SYS_MONITOR_LEN
- l1_code : ORIGIN = L1_INST_SRAM, LENGTH = L1_INST_SRAM_SIZE
- l1_data : ORIGIN = L1_DATA_B_SRAM, LENGTH = L1_DATA_B_SRAM_SIZE
-}
-
-ENTRY(_start)
-SECTIONS
-{
- .text :
- {
- cpu/blackfin/start.o (.text .text.*)
- __initcode_start = .;
- cpu/blackfin/initcode.o (.text .text.*)
- __initcode_end = .;
- *(.text .text.*)
- } >ram
-
- .rodata :
- {
- . = ALIGN(4);
- *(.rodata .rodata.*)
- *(.rodata1)
- *(.eh_frame)
- . = ALIGN(4);
- } >ram
-
- .data :
- {
- . = ALIGN(256);
- *(.data .data.*)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
- } >ram
-
- .u_boot_cmd :
- {
- ___u_boot_cmd_start = .;
- *(.u_boot_cmd)
- ___u_boot_cmd_end = .;
- } >ram
-
- .text_l1 :
- {
- . = ALIGN(4);
- __stext_l1 = .;
- *(.l1.text)
- . = ALIGN(4);
- __etext_l1 = .;
- } >l1_code AT>ram
- __stext_l1_lma = LOADADDR(.text_l1);
-
- .data_l1 :
- {
- . = ALIGN(4);
- __sdata_l1 = .;
- *(.l1.data)
- *(.l1.bss)
- . = ALIGN(4);
- __edata_l1 = .;
- } >l1_data AT>ram
- __sdata_l1_lma = LOADADDR(.data_l1);
-
- .bss :
- {
- . = ALIGN(4);
- __bss_start = .;
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss .bss.*)
- *(COMMON)
- __bss_end = .;
- } >ram
-}
+++ /dev/null
-/u-boot.lds
OBJS := $(addprefix $(obj),$(COBJS-y))
SOBJS := $(addprefix $(obj),$(SOBJS-y))
-$(LIB): $(obj).depend $(OBJS) $(SOBJS) $(obj)u-boot.lds
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
-$(obj)u-boot.lds: u-boot.lds.S
- $(CPP) $(CPPFLAGS) -D__ASSEMBLY__ -P $^ > $@
-
clean:
rm -f $(SOBJS) $(OBJS)
# This is not actually used for Blackfin boards so do not change it
#TEXT_BASE = do-not-use-me
-LDSCRIPT = $(obj)board/$(BOARDDIR)/u-boot.lds
-
# Set some default LDR flags based on boot mode.
LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))
+++ /dev/null
-/*
- * U-boot - u-boot.lds.S
- *
- * Copyright (c) 2005-2008 Analog Device Inc.
- *
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <asm/blackfin.h>
-#undef ALIGN
-#undef ENTRY
-#undef bfin
-
-/* If we don't actually load anything into L1 data, this will avoid
- * a syntax error. If we do actually load something into L1 data,
- * we'll get a linker memory load error (which is what we'd want).
- * This is here in the first place so we can quickly test building
- * for different CPU's which may lack non-cache L1 data.
- */
-#ifndef L1_DATA_B_SRAM
-# define L1_DATA_B_SRAM CONFIG_SYS_MONITOR_BASE
-# define L1_DATA_B_SRAM_SIZE 0
-#endif
-
-OUTPUT_ARCH(bfin)
-
-MEMORY
-{
- ram : ORIGIN = CONFIG_SYS_MONITOR_BASE, LENGTH = CONFIG_SYS_MONITOR_LEN
- l1_code : ORIGIN = L1_INST_SRAM, LENGTH = L1_INST_SRAM_SIZE
- l1_data : ORIGIN = L1_DATA_B_SRAM, LENGTH = L1_DATA_B_SRAM_SIZE
-}
-
-ENTRY(_start)
-SECTIONS
-{
- .text :
- {
- cpu/blackfin/start.o (.text .text.*)
- __initcode_start = .;
- cpu/blackfin/initcode.o (.text .text.*)
- __initcode_end = .;
- *(.text .text.*)
- } >ram
-
- .rodata :
- {
- . = ALIGN(4);
- *(.rodata .rodata.*)
- *(.rodata1)
- *(.eh_frame)
- . = ALIGN(4);
- } >ram
-
- .data :
- {
- . = ALIGN(256);
- *(.data .data.*)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
- } >ram
-
- .u_boot_cmd :
- {
- ___u_boot_cmd_start = .;
- *(.u_boot_cmd)
- ___u_boot_cmd_end = .;
- } >ram
-
- .text_l1 :
- {
- . = ALIGN(4);
- __stext_l1 = .;
- *(.l1.text)
- . = ALIGN(4);
- __etext_l1 = .;
- } >l1_code AT>ram
- __stext_l1_lma = LOADADDR(.text_l1);
-
- .data_l1 :
- {
- . = ALIGN(4);
- __sdata_l1 = .;
- *(.l1.data)
- *(.l1.bss)
- . = ALIGN(4);
- __edata_l1 = .;
- } >l1_data AT>ram
- __sdata_l1_lma = LOADADDR(.data_l1);
-
- .bss :
- {
- . = ALIGN(4);
- __bss_start = .;
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss .bss.*)
- *(COMMON)
- __bss_end = .;
- } >ram
-}
+++ /dev/null
-/u-boot.lds
OBJS := $(addprefix $(obj),$(COBJS-y))
SOBJS := $(addprefix $(obj),$(SOBJS-y))
-$(LIB): $(obj).depend $(OBJS) $(SOBJS) $(obj)u-boot.lds
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
-$(obj)u-boot.lds: u-boot.lds.S
- $(CPP) $(CPPFLAGS) -D__ASSEMBLY__ -P $^ > $@
-
clean:
rm -f $(SOBJS) $(OBJS)
# This is not actually used for Blackfin boards so do not change it
#TEXT_BASE = do-not-use-me
-LDSCRIPT = $(obj)board/$(BOARDDIR)/u-boot.lds
-
# Set some default LDR flags based on boot mode.
LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))
+++ /dev/null
-/u-boot.lds
OBJS := $(addprefix $(obj),$(COBJS-y))
SOBJS := $(addprefix $(obj),$(SOBJS-y))
-$(LIB): $(obj).depend $(OBJS) $(SOBJS) $(obj)u-boot.lds
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
-$(obj)u-boot.lds: u-boot.lds.S
- $(CPP) $(CPPFLAGS) -D__ASSEMBLY__ -P $^ > $@
-
clean:
rm -f $(SOBJS) $(OBJS)
# This is not actually used for Blackfin boards so do not change it
#TEXT_BASE = do-not-use-me
-LDSCRIPT = $(obj)board/$(BOARDDIR)/u-boot.lds
-
# Set some default LDR flags based on boot mode.
LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 8
LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))
+++ /dev/null
-/*
- * U-boot - u-boot.lds.S
- *
- * Copyright (c) 2005-2008 Analog Device Inc.
- *
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <asm/blackfin.h>
-#undef ALIGN
-#undef ENTRY
-#undef bfin
-
-/* If we don't actually load anything into L1 data, this will avoid
- * a syntax error. If we do actually load something into L1 data,
- * we'll get a linker memory load error (which is what we'd want).
- * This is here in the first place so we can quickly test building
- * for different CPU's which may lack non-cache L1 data.
- */
-#ifndef L1_DATA_B_SRAM
-# define L1_DATA_B_SRAM CONFIG_SYS_MONITOR_BASE
-# define L1_DATA_B_SRAM_SIZE 0
-#endif
-
-OUTPUT_ARCH(bfin)
-
-MEMORY
-{
- ram : ORIGIN = CONFIG_SYS_MONITOR_BASE, LENGTH = CONFIG_SYS_MONITOR_LEN
- l1_code : ORIGIN = L1_INST_SRAM, LENGTH = L1_INST_SRAM_SIZE
- l1_data : ORIGIN = L1_DATA_B_SRAM, LENGTH = L1_DATA_B_SRAM_SIZE
-}
-
-ENTRY(_start)
-SECTIONS
-{
- .text :
- {
- cpu/blackfin/start.o (.text .text.*)
-
-#ifdef ENV_IS_EMBEDDED
- /* WARNING - the following is hand-optimized to fit within
- * the sector before the environment sector. If it throws
- * an error during compilation remove an object here to get
- * it linked after the configuration sector.
- */
-
- cpu/blackfin/traps.o (.text .text.*)
- cpu/blackfin/interrupt.o (.text .text.*)
- cpu/blackfin/serial.o (.text .text.*)
- common/dlmalloc.o (.text .text.*)
- lib_generic/crc32.o (.text .text.*)
- lib_generic/zlib.o (.text .text.*)
- board/bf533-ezkit/bf533-ezkit.o (.text .text.*)
-
- . = DEFINED(env_offset) ? env_offset : .;
- common/env_embedded.o (.text .text.*)
-#endif
-
- __initcode_start = .;
- cpu/blackfin/initcode.o (.text .text.*)
- __initcode_end = .;
-
- *(.text .text.*)
- } >ram
-
- .rodata :
- {
- . = ALIGN(4);
- *(.rodata .rodata.*)
- *(.rodata1)
- *(.eh_frame)
- . = ALIGN(4);
- } >ram
-
- .data :
- {
- . = ALIGN(256);
- *(.data .data.*)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
- } >ram
-
- .u_boot_cmd :
- {
- ___u_boot_cmd_start = .;
- *(.u_boot_cmd)
- ___u_boot_cmd_end = .;
- } >ram
-
- .text_l1 :
- {
- . = ALIGN(4);
- __stext_l1 = .;
- *(.l1.text)
- . = ALIGN(4);
- __etext_l1 = .;
- } >l1_code AT>ram
- __stext_l1_lma = LOADADDR(.text_l1);
-
- .data_l1 :
- {
- . = ALIGN(4);
- __sdata_l1 = .;
- *(.l1.data)
- *(.l1.bss)
- . = ALIGN(4);
- __edata_l1 = .;
- } >l1_data AT>ram
- __sdata_l1_lma = LOADADDR(.data_l1);
-
- .bss :
- {
- . = ALIGN(4);
- __bss_start = .;
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss .bss.*)
- *(COMMON)
- __bss_end = .;
- } >ram
-}
+++ /dev/null
-/u-boot.lds
OBJS := $(addprefix $(obj),$(COBJS-y))
SOBJS := $(addprefix $(obj),$(SOBJS-y))
-$(LIB): $(obj).depend $(OBJS) $(SOBJS) $(obj)u-boot.lds
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
-$(obj)u-boot.lds: u-boot.lds.S
- $(CPP) $(CPPFLAGS) -D__ASSEMBLY__ -P $^ > $@
-
clean:
rm -f $(SOBJS) $(OBJS)
# This is not actually used for Blackfin boards so do not change it
#TEXT_BASE = do-not-use-me
-LDSCRIPT = $(obj)board/$(BOARDDIR)/u-boot.lds
-
# Set some default LDR flags based on boot mode.
LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 8
LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))
+++ /dev/null
-/*
- * U-boot - u-boot.lds.S
- *
- * Copyright (c) 2005-2008 Analog Device Inc.
- *
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <asm/blackfin.h>
-#undef ALIGN
-#undef ENTRY
-#undef bfin
-
-/* If we don't actually load anything into L1 data, this will avoid
- * a syntax error. If we do actually load something into L1 data,
- * we'll get a linker memory load error (which is what we'd want).
- * This is here in the first place so we can quickly test building
- * for different CPU's which may lack non-cache L1 data.
- */
-#ifndef L1_DATA_B_SRAM
-# define L1_DATA_B_SRAM CONFIG_SYS_MONITOR_BASE
-# define L1_DATA_B_SRAM_SIZE 0
-#endif
-
-OUTPUT_ARCH(bfin)
-
-MEMORY
-{
- ram : ORIGIN = CONFIG_SYS_MONITOR_BASE, LENGTH = CONFIG_SYS_MONITOR_LEN
- l1_code : ORIGIN = L1_INST_SRAM, LENGTH = L1_INST_SRAM_SIZE
- l1_data : ORIGIN = L1_DATA_B_SRAM, LENGTH = L1_DATA_B_SRAM_SIZE
-}
-
-ENTRY(_start)
-SECTIONS
-{
- .text :
- {
- cpu/blackfin/start.o (.text .text.*)
-
-#ifdef ENV_IS_EMBEDDED
- /* WARNING - the following is hand-optimized to fit within
- * the sector before the environment sector. If it throws
- * an error during compilation remove an object here to get
- * it linked after the configuration sector.
- */
-
- cpu/blackfin/traps.o (.text .text.*)
- cpu/blackfin/interrupt.o (.text .text.*)
- cpu/blackfin/serial.o (.text .text.*)
- common/dlmalloc.o (.text .text.*)
- lib_generic/crc32.o (.text .text.*)
-
- . = DEFINED(env_offset) ? env_offset : .;
- common/env_embedded.o (.text .text.*)
-#endif
-
- __initcode_start = .;
- cpu/blackfin/initcode.o (.text .text.*)
- __initcode_end = .;
-
- *(.text .text.*)
- } >ram
-
- .rodata :
- {
- . = ALIGN(4);
- *(.rodata .rodata.*)
- *(.rodata1)
- *(.eh_frame)
- . = ALIGN(4);
- } >ram
-
- .data :
- {
- . = ALIGN(256);
- *(.data .data.*)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
- } >ram
-
- .u_boot_cmd :
- {
- ___u_boot_cmd_start = .;
- *(.u_boot_cmd)
- ___u_boot_cmd_end = .;
- } >ram
-
- .text_l1 :
- {
- . = ALIGN(4);
- __stext_l1 = .;
- *(.l1.text)
- . = ALIGN(4);
- __etext_l1 = .;
- } >l1_code AT>ram
- __stext_l1_lma = LOADADDR(.text_l1);
-
- .data_l1 :
- {
- . = ALIGN(4);
- __sdata_l1 = .;
- *(.l1.data)
- *(.l1.bss)
- . = ALIGN(4);
- __edata_l1 = .;
- } >l1_data AT>ram
- __sdata_l1_lma = LOADADDR(.data_l1);
-
- .bss :
- {
- . = ALIGN(4);
- __bss_start = .;
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss .bss.*)
- *(COMMON)
- __bss_end = .;
- } >ram
-}
+++ /dev/null
-/u-boot.lds
OBJS := $(addprefix $(obj),$(COBJS-y))
SOBJS := $(addprefix $(obj),$(SOBJS-y))
-$(LIB): $(obj).depend $(OBJS) $(SOBJS) $(obj)u-boot.lds
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
-$(obj)u-boot.lds: u-boot.lds.S
- $(CPP) $(CPPFLAGS) -D__ASSEMBLY__ -P $^ > $@
-
clean:
rm -f $(SOBJS) $(OBJS)
# This is not actually used for Blackfin boards so do not change it
#TEXT_BASE = do-not-use-me
-LDSCRIPT = $(obj)board/$(BOARDDIR)/u-boot.lds
-
# Set some default LDR flags based on boot mode.
LDR_FLAGS-BFIN_BOOT_UART := --port g --gpio 6
LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))
+++ /dev/null
-/*
- * U-boot - u-boot.lds.S
- *
- * Copyright (c) 2005-2008 Analog Device Inc.
- *
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <asm/blackfin.h>
-#undef ALIGN
-#undef ENTRY
-#undef bfin
-
-/* If we don't actually load anything into L1 data, this will avoid
- * a syntax error. If we do actually load something into L1 data,
- * we'll get a linker memory load error (which is what we'd want).
- * This is here in the first place so we can quickly test building
- * for different CPU's which may lack non-cache L1 data.
- */
-#ifndef L1_DATA_B_SRAM
-# define L1_DATA_B_SRAM CONFIG_SYS_MONITOR_BASE
-# define L1_DATA_B_SRAM_SIZE 0
-#endif
-
-OUTPUT_ARCH(bfin)
-
-MEMORY
-{
- ram : ORIGIN = CONFIG_SYS_MONITOR_BASE, LENGTH = CONFIG_SYS_MONITOR_LEN
- l1_code : ORIGIN = L1_INST_SRAM, LENGTH = L1_INST_SRAM_SIZE
- l1_data : ORIGIN = L1_DATA_B_SRAM, LENGTH = L1_DATA_B_SRAM_SIZE
-}
-
-ENTRY(_start)
-SECTIONS
-{
- .text :
- {
- cpu/blackfin/start.o (.text .text.*)
-
-#ifdef ENV_IS_EMBEDDED
- /* WARNING - the following is hand-optimized to fit within
- * the sector before the environment sector. If it throws
- * an error during compilation remove an object here to get
- * it linked after the configuration sector.
- */
-
- cpu/blackfin/traps.o (.text .text.*)
- cpu/blackfin/interrupt.o (.text .text.*)
- cpu/blackfin/serial.o (.text .text.*)
- common/dlmalloc.o (.text .text.*)
- lib_generic/crc32.o (.text .text.*)
-
- . = DEFINED(env_offset) ? env_offset : .;
- common/env_embedded.o (.text .text.*)
-#endif
-
- __initcode_start = .;
- cpu/blackfin/initcode.o (.text .text.*)
- __initcode_end = .;
-
- *(.text .text.*)
- } >ram
-
- .rodata :
- {
- . = ALIGN(4);
- *(.rodata .rodata.*)
- *(.rodata1)
- *(.eh_frame)
- . = ALIGN(4);
- } >ram
-
- .data :
- {
- . = ALIGN(256);
- *(.data .data.*)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
- } >ram
-
- .u_boot_cmd :
- {
- ___u_boot_cmd_start = .;
- *(.u_boot_cmd)
- ___u_boot_cmd_end = .;
- } >ram
-
- .text_l1 :
- {
- . = ALIGN(4);
- __stext_l1 = .;
- *(.l1.text)
- . = ALIGN(4);
- __etext_l1 = .;
- } >l1_code AT>ram
- __stext_l1_lma = LOADADDR(.text_l1);
-
- .data_l1 :
- {
- . = ALIGN(4);
- __sdata_l1 = .;
- *(.l1.data)
- *(.l1.bss)
- . = ALIGN(4);
- __edata_l1 = .;
- } >l1_data AT>ram
- __sdata_l1_lma = LOADADDR(.data_l1);
-
- .bss :
- {
- . = ALIGN(4);
- __bss_start = .;
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss .bss.*)
- *(COMMON)
- __bss_end = .;
- } >ram
-}
+++ /dev/null
-/u-boot.lds
OBJS := $(addprefix $(obj),$(COBJS-y))
SOBJS := $(addprefix $(obj),$(SOBJS-y))
-$(LIB): $(obj).depend $(OBJS) $(SOBJS) $(obj)u-boot.lds
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
-$(obj)u-boot.lds: u-boot.lds.S
- $(CPP) $(CPPFLAGS) -D__ASSEMBLY__ -P $^ > $@
-
clean:
rm -f $(SOBJS) $(OBJS)
# This is not actually used for Blackfin boards so do not change it
#TEXT_BASE = do-not-use-me
-LDSCRIPT = $(obj)board/$(BOARDDIR)/u-boot.lds
-
# Set some default LDR flags based on boot mode.
LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))
+++ /dev/null
-/*
- * U-boot - u-boot.lds.S
- *
- * Copyright (c) 2005-2008 Analog Device Inc.
- *
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <asm/blackfin.h>
-#undef ALIGN
-#undef ENTRY
-#undef bfin
-
-/* If we don't actually load anything into L1 data, this will avoid
- * a syntax error. If we do actually load something into L1 data,
- * we'll get a linker memory load error (which is what we'd want).
- * This is here in the first place so we can quickly test building
- * for different CPU's which may lack non-cache L1 data.
- */
-#ifndef L1_DATA_B_SRAM
-# define L1_DATA_B_SRAM CONFIG_SYS_MONITOR_BASE
-# define L1_DATA_B_SRAM_SIZE 0
-#endif
-
-OUTPUT_ARCH(bfin)
-
-MEMORY
-{
- ram : ORIGIN = CONFIG_SYS_MONITOR_BASE, LENGTH = CONFIG_SYS_MONITOR_LEN
- l1_code : ORIGIN = L1_INST_SRAM, LENGTH = L1_INST_SRAM_SIZE
- l1_data : ORIGIN = L1_DATA_B_SRAM, LENGTH = L1_DATA_B_SRAM_SIZE
-}
-
-ENTRY(_start)
-SECTIONS
-{
- .text :
- {
- cpu/blackfin/start.o (.text .text.*)
-
-#ifdef ENV_IS_EMBEDDED
- /* WARNING - the following is hand-optimized to fit within
- * the sector before the environment sector. If it throws
- * an error during compilation remove an object here to get
- * it linked after the configuration sector.
- */
-
- cpu/blackfin/traps.o (.text .text.*)
- cpu/blackfin/interrupt.o (.text .text.*)
- cpu/blackfin/serial.o (.text .text.*)
- common/dlmalloc.o (.text .text.*)
- lib_generic/crc32.o (.text .text.*)
-
- . = DEFINED(env_offset) ? env_offset : .;
- common/env_embedded.o (.text .text.*)
-#endif
-
- __initcode_start = .;
- cpu/blackfin/initcode.o (.text .text.*)
- __initcode_end = .;
-
- *(.text .text.*)
- } >ram
-
- .rodata :
- {
- . = ALIGN(4);
- *(.rodata .rodata.*)
- *(.rodata1)
- *(.eh_frame)
- . = ALIGN(4);
- } >ram
-
- .data :
- {
- . = ALIGN(256);
- *(.data .data.*)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
- } >ram
-
- .u_boot_cmd :
- {
- ___u_boot_cmd_start = .;
- *(.u_boot_cmd)
- ___u_boot_cmd_end = .;
- } >ram
-
- .text_l1 :
- {
- . = ALIGN(4);
- __stext_l1 = .;
- *(.l1.text)
- . = ALIGN(4);
- __etext_l1 = .;
- } >l1_code AT>ram
- __stext_l1_lma = LOADADDR(.text_l1);
-
- .data_l1 :
- {
- . = ALIGN(4);
- __sdata_l1 = .;
- *(.l1.data)
- *(.l1.bss)
- . = ALIGN(4);
- __edata_l1 = .;
- } >l1_data AT>ram
- __sdata_l1_lma = LOADADDR(.data_l1);
-
- .bss :
- {
- . = ALIGN(4);
- __bss_start = .;
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss .bss.*)
- *(COMMON)
- __bss_end = .;
- } >ram
-}
+++ /dev/null
-/u-boot.lds
OBJS := $(addprefix $(obj),$(COBJS-y))
SOBJS := $(addprefix $(obj),$(SOBJS-y))
-$(LIB): $(obj).depend $(OBJS) $(SOBJS) $(obj)u-boot.lds
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
-$(obj)u-boot.lds: u-boot.lds.S
- $(CPP) $(CPPFLAGS) -D__ASSEMBLY__ -P $^ > $@
-
clean:
rm -f $(SOBJS) $(OBJS)
# This is not actually used for Blackfin boards so do not change it
#TEXT_BASE = do-not-use-me
-LDSCRIPT = $(obj)board/$(BOARDDIR)/u-boot.lds
-
# Set some default LDR flags based on boot mode.
LDR_FLAGS-BFIN_BOOT_UART := --port g --gpio 6
LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))
+++ /dev/null
-/*
- * U-boot - u-boot.lds.S
- *
- * Copyright (c) 2005-2008 Analog Device Inc.
- *
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <asm/blackfin.h>
-#undef ALIGN
-#undef ENTRY
-#undef bfin
-
-/* If we don't actually load anything into L1 data, this will avoid
- * a syntax error. If we do actually load something into L1 data,
- * we'll get a linker memory load error (which is what we'd want).
- * This is here in the first place so we can quickly test building
- * for different CPU's which may lack non-cache L1 data.
- */
-#ifndef L1_DATA_B_SRAM
-# define L1_DATA_B_SRAM CONFIG_SYS_MONITOR_BASE
-# define L1_DATA_B_SRAM_SIZE 0
-#endif
-
-OUTPUT_ARCH(bfin)
-
-MEMORY
-{
- ram : ORIGIN = CONFIG_SYS_MONITOR_BASE, LENGTH = CONFIG_SYS_MONITOR_LEN
- l1_code : ORIGIN = L1_INST_SRAM, LENGTH = L1_INST_SRAM_SIZE
- l1_data : ORIGIN = L1_DATA_B_SRAM, LENGTH = L1_DATA_B_SRAM_SIZE
-}
-
-ENTRY(_start)
-SECTIONS
-{
- .text :
- {
- cpu/blackfin/start.o (.text .text.*)
-
-#ifdef ENV_IS_EMBEDDED
- /* WARNING - the following is hand-optimized to fit within
- * the sector before the environment sector. If it throws
- * an error during compilation remove an object here to get
- * it linked after the configuration sector.
- */
-
- cpu/blackfin/traps.o (.text .text.*)
- cpu/blackfin/interrupt.o (.text .text.*)
- cpu/blackfin/serial.o (.text .text.*)
- common/dlmalloc.o (.text .text.*)
- lib_generic/crc32.o (.text .text.*)
-
- . = DEFINED(env_offset) ? env_offset : .;
- common/env_embedded.o (.text .text.*)
-#endif
-
- __initcode_start = .;
- cpu/blackfin/initcode.o (.text .text.*)
- __initcode_end = .;
-
- *(.text .text.*)
- } >ram
-
- .rodata :
- {
- . = ALIGN(4);
- *(.rodata .rodata.*)
- *(.rodata1)
- *(.eh_frame)
- . = ALIGN(4);
- } >ram
-
- .data :
- {
- . = ALIGN(256);
- *(.data .data.*)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
- } >ram
-
- .u_boot_cmd :
- {
- ___u_boot_cmd_start = .;
- *(.u_boot_cmd)
- ___u_boot_cmd_end = .;
- } >ram
-
- .text_l1 :
- {
- . = ALIGN(4);
- __stext_l1 = .;
- *(.l1.text)
- . = ALIGN(4);
- __etext_l1 = .;
- } >l1_code AT>ram
- __stext_l1_lma = LOADADDR(.text_l1);
-
- .data_l1 :
- {
- . = ALIGN(4);
- __sdata_l1 = .;
- *(.l1.data)
- *(.l1.bss)
- . = ALIGN(4);
- __edata_l1 = .;
- } >l1_data AT>ram
- __sdata_l1_lma = LOADADDR(.data_l1);
-
- .bss :
- {
- . = ALIGN(4);
- __bss_start = .;
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss .bss.*)
- *(COMMON)
- __bss_end = .;
- } >ram
-}
+++ /dev/null
-/u-boot.lds
OBJS := $(addprefix $(obj),$(COBJS-y))
SOBJS := $(addprefix $(obj),$(SOBJS-y))
-$(LIB): $(obj).depend $(OBJS) $(SOBJS) $(obj)u-boot.lds
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
-$(obj)u-boot.lds: u-boot.lds.S
- $(CPP) $(CPPFLAGS) -D__ASSEMBLY__ -P $^ > $@
-
clean:
rm -f $(SOBJS) $(OBJS)
# This is not actually used for Blackfin boards so do not change it
#TEXT_BASE = do-not-use-me
-LDSCRIPT = $(obj)board/$(BOARDDIR)/u-boot.lds
-
# Set some default LDR flags based on boot mode.
LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 8
LDR_FLAGS-BFIN_BOOT_UART := --port g --gpio 6
+++ /dev/null
-/*
- * U-boot - u-boot.lds.S
- *
- * Copyright (c) 2005-2008 Analog Device Inc.
- *
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <asm/blackfin.h>
-#undef ALIGN
-#undef ENTRY
-#undef bfin
-
-/* If we don't actually load anything into L1 data, this will avoid
- * a syntax error. If we do actually load something into L1 data,
- * we'll get a linker memory load error (which is what we'd want).
- * This is here in the first place so we can quickly test building
- * for different CPU's which may lack non-cache L1 data.
- */
-#ifndef L1_DATA_B_SRAM
-# define L1_DATA_B_SRAM CONFIG_SYS_MONITOR_BASE
-# define L1_DATA_B_SRAM_SIZE 0
-#endif
-
-OUTPUT_ARCH(bfin)
-
-MEMORY
-{
- ram : ORIGIN = CONFIG_SYS_MONITOR_BASE, LENGTH = CONFIG_SYS_MONITOR_LEN
- l1_code : ORIGIN = L1_INST_SRAM, LENGTH = L1_INST_SRAM_SIZE
- l1_data : ORIGIN = L1_DATA_B_SRAM, LENGTH = L1_DATA_B_SRAM_SIZE
-}
-
-ENTRY(_start)
-SECTIONS
-{
- .text :
- {
- cpu/blackfin/start.o (.text .text.*)
-
-#ifdef ENV_IS_EMBEDDED
- /* WARNING - the following is hand-optimized to fit within
- * the sector before the environment sector. If it throws
- * an error during compilation remove an object here to get
- * it linked after the configuration sector.
- */
-
- cpu/blackfin/traps.o (.text .text.*)
- cpu/blackfin/interrupt.o (.text .text.*)
- cpu/blackfin/serial.o (.text .text.*)
- common/dlmalloc.o (.text .text.*)
- lib_generic/crc32.o (.text .text.*)
-
- . = DEFINED(env_offset) ? env_offset : .;
- common/env_embedded.o (.text .text.*)
-#endif
-
- __initcode_start = .;
- cpu/blackfin/initcode.o (.text .text.*)
- __initcode_end = .;
-
- *(.text .text.*)
- } >ram
-
- .rodata :
- {
- . = ALIGN(4);
- *(.rodata .rodata.*)
- *(.rodata1)
- *(.eh_frame)
- . = ALIGN(4);
- } >ram
-
- .data :
- {
- . = ALIGN(256);
- *(.data .data.*)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
- } >ram
-
- .u_boot_cmd :
- {
- ___u_boot_cmd_start = .;
- *(.u_boot_cmd)
- ___u_boot_cmd_end = .;
- } >ram
-
- .text_l1 :
- {
- . = ALIGN(4);
- __stext_l1 = .;
- *(.l1.text)
- . = ALIGN(4);
- __etext_l1 = .;
- } >l1_code AT>ram
- __stext_l1_lma = LOADADDR(.text_l1);
-
- .data_l1 :
- {
- . = ALIGN(4);
- __sdata_l1 = .;
- *(.l1.data)
- *(.l1.bss)
- . = ALIGN(4);
- __edata_l1 = .;
- } >l1_data AT>ram
- __sdata_l1_lma = LOADADDR(.data_l1);
-
- .bss :
- {
- . = ALIGN(4);
- __bss_start = .;
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss .bss.*)
- *(COMMON)
- __bss_end = .;
- } >ram
-}
+++ /dev/null
-/u-boot.lds
OBJS := $(addprefix $(obj),$(COBJS-y))
SOBJS := $(addprefix $(obj),$(SOBJS-y))
-$(LIB): $(obj).depend $(OBJS) $(SOBJS) $(obj)u-boot.lds
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
-$(obj)u-boot.lds: u-boot.lds.S
- $(CPP) $(CPPFLAGS) -D__ASSEMBLY__ -P $^ > $@
-
clean:
rm -f $(SOBJS) $(OBJS)
# This is not actually used for Blackfin boards so do not change it
#TEXT_BASE = do-not-use-me
-LDSCRIPT = $(obj)board/$(BOARDDIR)/u-boot.lds
-
# Set some default LDR flags based on boot mode.
LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 8
LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))
+++ /dev/null
-/*
- * U-boot - u-boot.lds.S
- *
- * Copyright (c) 2005-2008 Analog Device Inc.
- *
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <asm/blackfin.h>
-#undef ALIGN
-#undef ENTRY
-#undef bfin
-
-/* If we don't actually load anything into L1 data, this will avoid
- * a syntax error. If we do actually load something into L1 data,
- * we'll get a linker memory load error (which is what we'd want).
- * This is here in the first place so we can quickly test building
- * for different CPU's which may lack non-cache L1 data.
- */
-#ifndef L1_DATA_B_SRAM
-# define L1_DATA_B_SRAM CONFIG_SYS_MONITOR_BASE
-# define L1_DATA_B_SRAM_SIZE 0
-#endif
-
-OUTPUT_ARCH(bfin)
-
-MEMORY
-{
- ram : ORIGIN = CONFIG_SYS_MONITOR_BASE, LENGTH = CONFIG_SYS_MONITOR_LEN
- l1_code : ORIGIN = L1_INST_SRAM, LENGTH = L1_INST_SRAM_SIZE
- l1_data : ORIGIN = L1_DATA_B_SRAM, LENGTH = L1_DATA_B_SRAM_SIZE
-}
-
-ENTRY(_start)
-SECTIONS
-{
- .text :
- {
- cpu/blackfin/start.o (.text .text.*)
-
-#ifdef ENV_IS_EMBEDDED
- /* WARNING - the following is hand-optimized to fit within
- * the sector before the environment sector. If it throws
- * an error during compilation remove an object here to get
- * it linked after the configuration sector.
- */
-
- cpu/blackfin/traps.o (.text .text.*)
- cpu/blackfin/interrupt.o (.text .text.*)
- cpu/blackfin/serial.o (.text .text.*)
- common/dlmalloc.o (.text .text.*)
- lib_generic/crc32.o (.text .text.*)
-
- . = DEFINED(env_offset) ? env_offset : .;
- common/env_embedded.o (.text .text.*)
-#endif
-
- __initcode_start = .;
- cpu/blackfin/initcode.o (.text .text.*)
- __initcode_end = .;
-
- *(.text .text.*)
- } >ram
-
- .rodata :
- {
- . = ALIGN(4);
- *(.rodata .rodata.*)
- *(.rodata1)
- *(.eh_frame)
- . = ALIGN(4);
- } >ram
-
- .data :
- {
- . = ALIGN(256);
- *(.data .data.*)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
- } >ram
-
- .u_boot_cmd :
- {
- ___u_boot_cmd_start = .;
- *(.u_boot_cmd)
- ___u_boot_cmd_end = .;
- } >ram
-
- .text_l1 :
- {
- . = ALIGN(4);
- __stext_l1 = .;
- *(.l1.text)
- . = ALIGN(4);
- __etext_l1 = .;
- } >l1_code AT>ram
- __stext_l1_lma = LOADADDR(.text_l1);
-
- .data_l1 :
- {
- . = ALIGN(4);
- __sdata_l1 = .;
- *(.l1.data)
- *(.l1.bss)
- . = ALIGN(4);
- __edata_l1 = .;
- } >l1_data AT>ram
- __sdata_l1_lma = LOADADDR(.data_l1);
-
- .bss :
- {
- . = ALIGN(4);
- __bss_start = .;
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss .bss.*)
- *(COMMON)
- __bss_end = .;
- } >ram
-}
+++ /dev/null
-/u-boot.lds
OBJS := $(addprefix $(obj),$(COBJS-y))
SOBJS := $(addprefix $(obj),$(SOBJS-y))
-$(LIB): $(obj).depend $(OBJS) $(SOBJS) $(obj)u-boot.lds
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
-$(obj)u-boot.lds: u-boot.lds.S
- $(CPP) $(CPPFLAGS) -D__ASSEMBLY__ -P $^ > $@
-
clean:
rm -f $(SOBJS) $(OBJS)
# This is not actually used for Blackfin boards so do not change it
#TEXT_BASE = do-not-use-me
-LDSCRIPT = $(obj)board/$(BOARDDIR)/u-boot.lds
-
# Set some default LDR flags based on boot mode.
LDR_FLAGS-BFIN_BOOT_PARA := --dma 6
LDR_FLAGS-BFIN_BOOT_FIFO := --dma 1
+++ /dev/null
-/*
- * U-boot - u-boot.lds.S
- *
- * Copyright (c) 2005-2008 Analog Device Inc.
- *
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <asm/blackfin.h>
-#undef ALIGN
-#undef ENTRY
-#undef bfin
-
-/* If we don't actually load anything into L1 data, this will avoid
- * a syntax error. If we do actually load something into L1 data,
- * we'll get a linker memory load error (which is what we'd want).
- * This is here in the first place so we can quickly test building
- * for different CPU's which may lack non-cache L1 data.
- */
-#ifndef L1_DATA_B_SRAM
-# define L1_DATA_B_SRAM CONFIG_SYS_MONITOR_BASE
-# define L1_DATA_B_SRAM_SIZE 0
-#endif
-
-OUTPUT_ARCH(bfin)
-
-MEMORY
-{
- ram : ORIGIN = CONFIG_SYS_MONITOR_BASE, LENGTH = CONFIG_SYS_MONITOR_LEN
- l1_code : ORIGIN = L1_INST_SRAM, LENGTH = L1_INST_SRAM_SIZE
- l1_data : ORIGIN = L1_DATA_B_SRAM, LENGTH = L1_DATA_B_SRAM_SIZE
-}
-
-ENTRY(_start)
-SECTIONS
-{
- .text :
- {
- cpu/blackfin/start.o (.text .text.*)
- __initcode_start = .;
- cpu/blackfin/initcode.o (.text .text.*)
- __initcode_end = .;
- *(.text .text.*)
- } >ram
-
- .rodata :
- {
- . = ALIGN(4);
- *(.rodata .rodata.*)
- *(.rodata1)
- *(.eh_frame)
- . = ALIGN(4);
- } >ram
-
- .data :
- {
- . = ALIGN(256);
- *(.data .data.*)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
- } >ram
-
- .u_boot_cmd :
- {
- ___u_boot_cmd_start = .;
- *(.u_boot_cmd)
- ___u_boot_cmd_end = .;
- } >ram
-
- .text_l1 :
- {
- . = ALIGN(4);
- __stext_l1 = .;
- *(.l1.text)
- . = ALIGN(4);
- __etext_l1 = .;
- } >l1_code AT>ram
- __stext_l1_lma = LOADADDR(.text_l1);
-
- .data_l1 :
- {
- . = ALIGN(4);
- __sdata_l1 = .;
- *(.l1.data)
- *(.l1.bss)
- . = ALIGN(4);
- __edata_l1 = .;
- } >l1_data AT>ram
- __sdata_l1_lma = LOADADDR(.data_l1);
-
- .bss :
- {
- . = ALIGN(4);
- __bss_start = .;
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss .bss.*)
- *(COMMON)
- __bss_end = .;
- } >ram
-}
+++ /dev/null
-/u-boot.lds
OBJS := $(addprefix $(obj),$(COBJS-y))
SOBJS := $(addprefix $(obj),$(SOBJS-y))
-$(LIB): $(obj).depend $(OBJS) $(SOBJS) $(obj)u-boot.lds
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
-$(obj)u-boot.lds: u-boot.lds.S
- $(CPP) $(CPPFLAGS) -D__ASSEMBLY__ -P $^ > $@
-
clean:
rm -f $(SOBJS) $(OBJS)
# This is not actually used for Blackfin boards so do not change it
#TEXT_BASE = do-not-use-me
-LDSCRIPT = $(obj)board/$(BOARDDIR)/u-boot.lds
-
# Set some default LDR flags based on boot mode.
LDR_FLAGS-BFIN_BOOT_PARA := --bits 16
LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))
+++ /dev/null
-/*
- * U-boot - u-boot.lds.S
- *
- * Copyright (c) 2005-2008 Analog Device Inc.
- *
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <asm/blackfin.h>
-#undef ALIGN
-#undef ENTRY
-#undef bfin
-
-/* If we don't actually load anything into L1 data, this will avoid
- * a syntax error. If we do actually load something into L1 data,
- * we'll get a linker memory load error (which is what we'd want).
- * This is here in the first place so we can quickly test building
- * for different CPU's which may lack non-cache L1 data.
- */
-#ifndef L1_DATA_B_SRAM
-# define L1_DATA_B_SRAM CONFIG_SYS_MONITOR_BASE
-# define L1_DATA_B_SRAM_SIZE 0
-#endif
-
-/* The 0xC offset is so we don't clobber the tiny LDR jump block. */
-#ifdef CONFIG_BFIN_BOOTROM_USES_EVT1
-# define L1_CODE_ORIGIN L1_INST_SRAM
-#else
-# define L1_CODE_ORIGIN L1_INST_SRAM + 0xC
-#endif
-
-OUTPUT_ARCH(bfin)
-
-MEMORY
-{
- ram : ORIGIN = CONFIG_SYS_MONITOR_BASE, LENGTH = CONFIG_SYS_MONITOR_LEN
- l1_code : ORIGIN = L1_CODE_ORIGIN, LENGTH = L1_INST_SRAM_SIZE
- l1_data : ORIGIN = L1_DATA_B_SRAM, LENGTH = L1_DATA_B_SRAM_SIZE
-}
-
-ENTRY(_start)
-SECTIONS
-{
- .text :
- {
- cpu/blackfin/start.o (.text .text.*)
-
-#ifdef ENV_IS_EMBEDDED
- /* WARNING - the following is hand-optimized to fit within
- * the sector before the environment sector. If it throws
- * an error during compilation remove an object here to get
- * it linked after the configuration sector.
- */
-
- cpu/blackfin/traps.o (.text .text.*)
- cpu/blackfin/interrupt.o (.text .text.*)
- cpu/blackfin/serial.o (.text .text.*)
- common/dlmalloc.o (.text .text.*)
- lib_generic/crc32.o (.text .text.*)
- lib_generic/zlib.o (.text .text.*)
- board/bf561-ezkit/bf561-ezkit.o (.text .text.*)
-
- . = DEFINED(env_offset) ? env_offset : .;
- common/env_embedded.o (.text .text.*)
-#endif
-
- __initcode_start = .;
- cpu/blackfin/initcode.o (.text .text.*)
- __initcode_end = .;
-
- *(.text .text.*)
- } >ram
-
- .rodata :
- {
- . = ALIGN(4);
- *(.rodata .rodata.*)
- *(.rodata1)
- *(.eh_frame)
- . = ALIGN(4);
- } >ram
-
- .data :
- {
- . = ALIGN(256);
- *(.data .data.*)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
- } >ram
-
- .u_boot_cmd :
- {
- ___u_boot_cmd_start = .;
- *(.u_boot_cmd)
- ___u_boot_cmd_end = .;
- } >ram
-
- .text_l1 :
- {
- . = ALIGN(4);
- __stext_l1 = .;
- *(.l1.text)
- . = ALIGN(4);
- __etext_l1 = .;
- } >l1_code AT>ram
- __stext_l1_lma = LOADADDR(.text_l1);
-
- .data_l1 :
- {
- . = ALIGN(4);
- __sdata_l1 = .;
- *(.l1.data)
- *(.l1.bss)
- . = ALIGN(4);
- __edata_l1 = .;
- } >l1_data AT>ram
- __sdata_l1_lma = LOADADDR(.data_l1);
-
- .bss :
- {
- . = ALIGN(4);
- __bss_start = .;
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss .bss.*)
- *(COMMON)
- __bss_end = .;
- } >ram
-}
+++ /dev/null
-/u-boot.lds
OBJS := $(addprefix $(obj),$(COBJS-y))
SOBJS := $(addprefix $(obj),$(SOBJS-y))
-$(LIB): $(obj).depend $(OBJS) $(SOBJS) $(obj)u-boot.lds
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
-$(obj)u-boot.lds: u-boot.lds.S
- $(CPP) $(CPPFLAGS) -D__ASSEMBLY__ -P $^ > $@
-
clean:
rm -f $(SOBJS) $(OBJS)
# This is not actually used for Blackfin boards so do not change it
#TEXT_BASE = do-not-use-me
-LDSCRIPT = $(obj)board/$(BOARDDIR)/u-boot.lds
-
# Set some default LDR flags based on boot mode.
LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))
+++ /dev/null
-/*
- * U-boot - u-boot.lds.S
- *
- * Copyright (c) 2005-2008 Analog Device Inc.
- *
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <asm/blackfin.h>
-#undef ALIGN
-#undef ENTRY
-#undef bfin
-
-/* If we don't actually load anything into L1 data, this will avoid
- * a syntax error. If we do actually load something into L1 data,
- * we'll get a linker memory load error (which is what we'd want).
- * This is here in the first place so we can quickly test building
- * for different CPU's which may lack non-cache L1 data.
- */
-#ifndef L1_DATA_B_SRAM
-# define L1_DATA_B_SRAM CONFIG_SYS_MONITOR_BASE
-# define L1_DATA_B_SRAM_SIZE 0
-#endif
-
-OUTPUT_ARCH(bfin)
-
-MEMORY
-{
- ram : ORIGIN = CONFIG_SYS_MONITOR_BASE, LENGTH = CONFIG_SYS_MONITOR_LEN
- l1_code : ORIGIN = L1_INST_SRAM, LENGTH = L1_INST_SRAM_SIZE
- l1_data : ORIGIN = L1_DATA_B_SRAM, LENGTH = L1_DATA_B_SRAM_SIZE
-}
-
-ENTRY(_start)
-SECTIONS
-{
- .text :
- {
- cpu/blackfin/start.o (.text .text.*)
-
-#ifdef ENV_IS_EMBEDDED
- /* WARNING - the following is hand-optimized to fit within
- * the sector before the environment sector. If it throws
- * an error during compilation remove an object here to get
- * it linked after the configuration sector.
- */
-
- cpu/blackfin/traps.o (.text .text.*)
- cpu/blackfin/interrupt.o (.text .text.*)
- cpu/blackfin/serial.o (.text .text.*)
- common/dlmalloc.o (.text .text.*)
- lib_generic/crc32.o (.text .text.*)
-
- . = DEFINED(env_offset) ? env_offset : .;
- common/env_embedded.o (.text .text.*)
-#endif
-
- __initcode_start = .;
- cpu/blackfin/initcode.o (.text .text.*)
- __initcode_end = .;
-
- *(.text .text.*)
- } >ram
-
- .rodata :
- {
- . = ALIGN(4);
- *(.rodata .rodata.*)
- *(.rodata1)
- *(.eh_frame)
- . = ALIGN(4);
- } >ram
-
- .data :
- {
- . = ALIGN(256);
- *(.data .data.*)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
- } >ram
-
- .u_boot_cmd :
- {
- ___u_boot_cmd_start = .;
- *(.u_boot_cmd)
- ___u_boot_cmd_end = .;
- } >ram
-
- .text_l1 :
- {
- . = ALIGN(4);
- __stext_l1 = .;
- *(.l1.text)
- . = ALIGN(4);
- __etext_l1 = .;
- } >l1_code AT>ram
- __stext_l1_lma = LOADADDR(.text_l1);
-
- .data_l1 :
- {
- . = ALIGN(4);
- __sdata_l1 = .;
- *(.l1.data)
- *(.l1.bss)
- . = ALIGN(4);
- __edata_l1 = .;
- } >l1_data AT>ram
- __sdata_l1_lma = LOADADDR(.data_l1);
-
- .bss :
- {
- . = ALIGN(4);
- __bss_start = .;
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss .bss.*)
- *(COMMON)
- __bss_end = .;
- } >ram
-}
+++ /dev/null
-/u-boot.lds
OBJS := $(addprefix $(obj),$(COBJS-y))
SOBJS := $(addprefix $(obj),$(SOBJS-y))
-$(LIB): $(obj).depend $(OBJS) $(SOBJS) $(obj)u-boot.lds
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
-$(obj)u-boot.lds: u-boot.lds.S
- $(CPP) $(CPPFLAGS) -D__ASSEMBLY__ -P $^ > $@
-
clean:
rm -f $(SOBJS) $(OBJS)
# This is not actually used for Blackfin boards so do not change it
#TEXT_BASE = do-not-use-me
-LDSCRIPT = $(obj)board/$(BOARDDIR)/u-boot.lds
-
# Set some default LDR flags based on boot mode.
LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))
+++ /dev/null
-/*
- * U-boot - u-boot.lds.S
- *
- * Copyright (c) 2005-2008 Analog Device Inc.
- *
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <asm/blackfin.h>
-#undef ALIGN
-#undef ENTRY
-#undef bfin
-
-/* If we don't actually load anything into L1 data, this will avoid
- * a syntax error. If we do actually load something into L1 data,
- * we'll get a linker memory load error (which is what we'd want).
- * This is here in the first place so we can quickly test building
- * for different CPU's which may lack non-cache L1 data.
- */
-#ifndef L1_DATA_B_SRAM
-# define L1_DATA_B_SRAM CONFIG_SYS_MONITOR_BASE
-# define L1_DATA_B_SRAM_SIZE 0
-#endif
-
-OUTPUT_ARCH(bfin)
-
-MEMORY
-{
- ram : ORIGIN = CONFIG_SYS_MONITOR_BASE, LENGTH = CONFIG_SYS_MONITOR_LEN
- l1_code : ORIGIN = L1_INST_SRAM, LENGTH = L1_INST_SRAM_SIZE
- l1_data : ORIGIN = L1_DATA_B_SRAM, LENGTH = L1_DATA_B_SRAM_SIZE
-}
-
-ENTRY(_start)
-SECTIONS
-{
- .text :
- {
- cpu/blackfin/start.o (.text .text.*)
- __initcode_start = .;
- cpu/blackfin/initcode.o (.text .text.*)
- __initcode_end = .;
- *(.text .text.*)
- } >ram
-
- .rodata :
- {
- . = ALIGN(4);
- *(.rodata .rodata.*)
- *(.rodata1)
- *(.eh_frame)
- . = ALIGN(4);
- } >ram
-
- .data :
- {
- . = ALIGN(256);
- *(.data .data.*)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
- } >ram
-
- .u_boot_cmd :
- {
- ___u_boot_cmd_start = .;
- *(.u_boot_cmd)
- ___u_boot_cmd_end = .;
- } >ram
-
- .text_l1 :
- {
- . = ALIGN(4);
- __stext_l1 = .;
- *(.l1.text)
- . = ALIGN(4);
- __etext_l1 = .;
- } >l1_code AT>ram
- __stext_l1_lma = LOADADDR(.text_l1);
-
- .data_l1 :
- {
- . = ALIGN(4);
- __sdata_l1 = .;
- *(.l1.data)
- *(.l1.bss)
- . = ALIGN(4);
- __edata_l1 = .;
- } >l1_data AT>ram
- __sdata_l1_lma = LOADADDR(.data_l1);
-
- .bss :
- {
- . = ALIGN(4);
- __bss_start = .;
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss .bss.*)
- *(COMMON)
- __bss_end = .;
- } >ram
-}
+++ /dev/null
-/u-boot.lds
OBJS := $(addprefix $(obj),$(COBJS-y))
SOBJS := $(addprefix $(obj),$(SOBJS-y))
-$(LIB): $(obj).depend $(OBJS) $(SOBJS) $(obj)u-boot.lds
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
-$(obj)u-boot.lds: u-boot.lds.S
- $(CPP) $(CPPFLAGS) -D__ASSEMBLY__ -P $^ > $@
-
clean:
rm -f $(SOBJS) $(OBJS)
# This is not actually used for Blackfin boards so do not change it
#TEXT_BASE = do-not-use-me
-LDSCRIPT = $(obj)board/$(BOARDDIR)/u-boot.lds
-
# Set some default LDR flags based on boot mode.
LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 8
LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))
+++ /dev/null
-/*
- * U-boot - u-boot.lds.S
- *
- * Copyright (c) 2005-2008 Analog Device Inc.
- *
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <asm/blackfin.h>
-#undef ALIGN
-#undef ENTRY
-#undef bfin
-
-/* If we don't actually load anything into L1 data, this will avoid
- * a syntax error. If we do actually load something into L1 data,
- * we'll get a linker memory load error (which is what we'd want).
- * This is here in the first place so we can quickly test building
- * for different CPU's which may lack non-cache L1 data.
- */
-#ifndef L1_DATA_B_SRAM
-# define L1_DATA_B_SRAM CONFIG_SYS_MONITOR_BASE
-# define L1_DATA_B_SRAM_SIZE 0
-#endif
-
-OUTPUT_ARCH(bfin)
-
-MEMORY
-{
- ram : ORIGIN = CONFIG_SYS_MONITOR_BASE, LENGTH = CONFIG_SYS_MONITOR_LEN
- l1_code : ORIGIN = L1_INST_SRAM, LENGTH = L1_INST_SRAM_SIZE
- l1_data : ORIGIN = L1_DATA_B_SRAM, LENGTH = L1_DATA_B_SRAM_SIZE
-}
-
-ENTRY(_start)
-SECTIONS
-{
- .text :
- {
- cpu/blackfin/start.o (.text .text.*)
-
-#ifdef ENV_IS_EMBEDDED
- /* WARNING - the following is hand-optimized to fit within
- * the sector before the environment sector. If it throws
- * an error during compilation remove an object here to get
- * it linked after the configuration sector.
- */
-
- cpu/blackfin/traps.o (.text .text.*)
- cpu/blackfin/interrupt.o (.text .text.*)
- cpu/blackfin/serial.o (.text .text.*)
- common/dlmalloc.o (.text .text.*)
- lib_generic/crc32.o (.text .text.*)
-
- . = DEFINED(env_offset) ? env_offset : .;
- common/env_embedded.o (.text .text.*)
-#endif
-
- __initcode_start = .;
- cpu/blackfin/initcode.o (.text .text.*)
- __initcode_end = .;
-
- *(.text .text.*)
- } >ram
-
- .rodata :
- {
- . = ALIGN(4);
- *(.rodata .rodata.*)
- *(.rodata1)
- *(.eh_frame)
- . = ALIGN(4);
- } >ram
-
- .data :
- {
- . = ALIGN(256);
- *(.data .data.*)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
- } >ram
-
- .u_boot_cmd :
- {
- ___u_boot_cmd_start = .;
- *(.u_boot_cmd)
- ___u_boot_cmd_end = .;
- } >ram
-
- .text_l1 :
- {
- . = ALIGN(4);
- __stext_l1 = .;
- *(.l1.text)
- . = ALIGN(4);
- __etext_l1 = .;
- } >l1_code AT>ram
- __stext_l1_lma = LOADADDR(.text_l1);
-
- .data_l1 :
- {
- . = ALIGN(4);
- __sdata_l1 = .;
- *(.l1.data)
- *(.l1.bss)
- . = ALIGN(4);
- __edata_l1 = .;
- } >l1_data AT>ram
- __sdata_l1_lma = LOADADDR(.data_l1);
-
- .bss :
- {
- . = ALIGN(4);
- __bss_start = .;
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss .bss.*)
- *(COMMON)
- __bss_end = .;
- } >ram
-}
+++ /dev/null
-/u-boot.lds
OBJS := $(addprefix $(obj),$(COBJS-y))
SOBJS := $(addprefix $(obj),$(SOBJS-y))
-$(LIB): $(obj).depend $(OBJS) $(SOBJS) $(obj)u-boot.lds
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
-$(obj)u-boot.lds: u-boot.lds.S
- $(CPP) $(CPPFLAGS) -D__ASSEMBLY__ -P $^ > $@
-
clean:
rm -f $(SOBJS) $(OBJS)
# This is not actually used for Blackfin boards so do not change it
#TEXT_BASE = do-not-use-me
-LDSCRIPT = $(obj)board/$(BOARDDIR)/u-boot.lds
-
# Set some default LDR flags based on boot mode.
LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 8
LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))
+++ /dev/null
-/*
- * U-boot - u-boot.lds.S
- *
- * Copyright (c) 2005-2008 Analog Device Inc.
- *
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <asm/blackfin.h>
-#undef ALIGN
-#undef ENTRY
-#undef bfin
-
-/* If we don't actually load anything into L1 data, this will avoid
- * a syntax error. If we do actually load something into L1 data,
- * we'll get a linker memory load error (which is what we'd want).
- * This is here in the first place so we can quickly test building
- * for different CPU's which may lack non-cache L1 data.
- */
-#ifndef L1_DATA_B_SRAM
-# define L1_DATA_B_SRAM CONFIG_SYS_MONITOR_BASE
-# define L1_DATA_B_SRAM_SIZE 0
-#endif
-
-OUTPUT_ARCH(bfin)
-
-MEMORY
-{
- ram : ORIGIN = CONFIG_SYS_MONITOR_BASE, LENGTH = CONFIG_SYS_MONITOR_LEN
- l1_code : ORIGIN = L1_INST_SRAM, LENGTH = L1_INST_SRAM_SIZE
- l1_data : ORIGIN = L1_DATA_B_SRAM, LENGTH = L1_DATA_B_SRAM_SIZE
-}
-
-ENTRY(_start)
-SECTIONS
-{
- .text :
- {
- cpu/blackfin/start.o (.text .text.*)
-
-#ifdef ENV_IS_EMBEDDED
- /* WARNING - the following is hand-optimized to fit within
- * the sector before the environment sector. If it throws
- * an error during compilation remove an object here to get
- * it linked after the configuration sector.
- */
-
- cpu/blackfin/traps.o (.text .text.*)
- cpu/blackfin/interrupt.o (.text .text.*)
- cpu/blackfin/serial.o (.text .text.*)
- common/dlmalloc.o (.text .text.*)
- lib_generic/crc32.o (.text .text.*)
-
- . = DEFINED(env_offset) ? env_offset : .;
- common/env_embedded.o (.text .text.*)
-#endif
-
- __initcode_start = .;
- cpu/blackfin/initcode.o (.text .text.*)
- __initcode_end = .;
-
- *(.text .text.*)
- } >ram
-
- .rodata :
- {
- . = ALIGN(4);
- *(.rodata .rodata.*)
- *(.rodata1)
- *(.eh_frame)
- . = ALIGN(4);
- } >ram
-
- .data :
- {
- . = ALIGN(256);
- *(.data .data.*)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
- } >ram
-
- .u_boot_cmd :
- {
- ___u_boot_cmd_start = .;
- *(.u_boot_cmd)
- ___u_boot_cmd_end = .;
- } >ram
-
- .text_l1 :
- {
- . = ALIGN(4);
- __stext_l1 = .;
- *(.l1.text)
- . = ALIGN(4);
- __etext_l1 = .;
- } >l1_code AT>ram
- __stext_l1_lma = LOADADDR(.text_l1);
-
- .data_l1 :
- {
- . = ALIGN(4);
- __sdata_l1 = .;
- *(.l1.data)
- *(.l1.bss)
- . = ALIGN(4);
- __edata_l1 = .;
- } >l1_data AT>ram
- __sdata_l1_lma = LOADADDR(.data_l1);
-
- .bss :
- {
- . = ALIGN(4);
- __bss_start = .;
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss .bss.*)
- *(COMMON)
- __bss_end = .;
- } >ram
-}
+++ /dev/null
-/u-boot.lds
OBJS := $(addprefix $(obj),$(COBJS-y))
SOBJS := $(addprefix $(obj),$(SOBJS-y))
-$(LIB): $(obj).depend $(OBJS) $(SOBJS) $(obj)u-boot.lds
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
-$(obj)u-boot.lds: u-boot.lds.S
- $(CPP) $(CPPFLAGS) -D__ASSEMBLY__ -P $^ > $@
-
clean:
rm -f $(SOBJS) $(OBJS)
# This is not actually used for Blackfin boards so do not change it
#TEXT_BASE = do-not-use-me
-LDSCRIPT = $(obj)board/$(BOARDDIR)/u-boot.lds
-
# Set some default LDR flags based on boot mode.
LDR_FLAGS-BFIN_BOOT_PARA := --dma 6
LDR_FLAGS-BFIN_BOOT_FIFO := --dma 1
+++ /dev/null
-/*
- * U-boot - u-boot.lds.S
- *
- * Copyright (c) 2005-2008 Analog Device Inc.
- *
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <asm/blackfin.h>
-#undef ALIGN
-#undef ENTRY
-#undef bfin
-
-/* If we don't actually load anything into L1 data, this will avoid
- * a syntax error. If we do actually load something into L1 data,
- * we'll get a linker memory load error (which is what we'd want).
- * This is here in the first place so we can quickly test building
- * for different CPU's which may lack non-cache L1 data.
- */
-#ifndef L1_DATA_B_SRAM
-# define L1_DATA_B_SRAM CONFIG_SYS_MONITOR_BASE
-# define L1_DATA_B_SRAM_SIZE 0
-#endif
-
-OUTPUT_ARCH(bfin)
-
-MEMORY
-{
- ram : ORIGIN = CONFIG_SYS_MONITOR_BASE, LENGTH = CONFIG_SYS_MONITOR_LEN
- l1_code : ORIGIN = L1_INST_SRAM, LENGTH = L1_INST_SRAM_SIZE
- l1_data : ORIGIN = L1_DATA_B_SRAM, LENGTH = L1_DATA_B_SRAM_SIZE
-}
-
-ENTRY(_start)
-SECTIONS
-{
- .text :
- {
- cpu/blackfin/start.o (.text .text.*)
- __initcode_start = .;
- cpu/blackfin/initcode.o (.text .text.*)
- __initcode_end = .;
- *(.text .text.*)
- } >ram
-
- .rodata :
- {
- . = ALIGN(4);
- *(.rodata .rodata.*)
- *(.rodata1)
- *(.eh_frame)
- . = ALIGN(4);
- } >ram
-
- .data :
- {
- . = ALIGN(256);
- *(.data .data.*)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
- } >ram
-
- .u_boot_cmd :
- {
- ___u_boot_cmd_start = .;
- *(.u_boot_cmd)
- ___u_boot_cmd_end = .;
- } >ram
-
- .text_l1 :
- {
- . = ALIGN(4);
- __stext_l1 = .;
- *(.l1.text)
- . = ALIGN(4);
- __etext_l1 = .;
- } >l1_code AT>ram
- __stext_l1_lma = LOADADDR(.text_l1);
-
- .data_l1 :
- {
- . = ALIGN(4);
- __sdata_l1 = .;
- *(.l1.data)
- *(.l1.bss)
- . = ALIGN(4);
- __edata_l1 = .;
- } >l1_data AT>ram
- __sdata_l1_lma = LOADADDR(.data_l1);
-
- .bss :
- {
- . = ALIGN(4);
- __bss_start = .;
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss .bss.*)
- *(COMMON)
- __bss_end = .;
- } >ram
-}
+++ /dev/null
-/u-boot.lds
OBJS := $(addprefix $(obj),$(COBJS-y))
SOBJS := $(addprefix $(obj),$(SOBJS-y))
-$(LIB): $(obj).depend $(OBJS) $(SOBJS) $(obj)u-boot.lds
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
-$(obj)u-boot.lds: u-boot.lds.S
- $(CPP) $(CPPFLAGS) -D__ASSEMBLY__ -P $^ > $@
-
clean:
rm -f $(SOBJS) $(OBJS)
# This is not actually used for Blackfin boards so do not change it
#TEXT_BASE = do-not-use-me
-LDSCRIPT = $(obj)board/$(BOARDDIR)/u-boot.lds
-
# Set some default LDR flags based on boot mode.
LDR_FLAGS-BFIN_BOOT_PARA := --bits 16
LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))
+++ /dev/null
-/*
- * U-boot - u-boot.lds.S
- *
- * Copyright (c) 2005-2008 Analog Device Inc.
- *
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <asm/blackfin.h>
-#undef ALIGN
-#undef ENTRY
-#undef bfin
-
-/* If we don't actually load anything into L1 data, this will avoid
- * a syntax error. If we do actually load something into L1 data,
- * we'll get a linker memory load error (which is what we'd want).
- * This is here in the first place so we can quickly test building
- * for different CPU's which may lack non-cache L1 data.
- */
-#ifndef L1_DATA_B_SRAM
-# define L1_DATA_B_SRAM CONFIG_SYS_MONITOR_BASE
-# define L1_DATA_B_SRAM_SIZE 0
-#endif
-
-/* The 0xC offset is so we don't clobber the tiny LDR jump block. */
-#ifdef CONFIG_BFIN_BOOTROM_USES_EVT1
-# define L1_CODE_ORIGIN L1_INST_SRAM
-#else
-# define L1_CODE_ORIGIN L1_INST_SRAM + 0xC
-#endif
-
-OUTPUT_ARCH(bfin)
-
-MEMORY
-{
- ram : ORIGIN = CONFIG_SYS_MONITOR_BASE, LENGTH = CONFIG_SYS_MONITOR_LEN
- l1_code : ORIGIN = L1_CODE_ORIGIN, LENGTH = L1_INST_SRAM_SIZE
- l1_data : ORIGIN = L1_DATA_B_SRAM, LENGTH = L1_DATA_B_SRAM_SIZE
-}
-
-ENTRY(_start)
-SECTIONS
-{
- .text :
- {
- cpu/blackfin/start.o (.text .text.*)
-
-#ifdef ENV_IS_EMBEDDED
- /* WARNING - the following is hand-optimized to fit within
- * the sector before the environment sector. If it throws
- * an error during compilation remove an object here to get
- * it linked after the configuration sector.
- */
-
- cpu/blackfin/traps.o (.text .text.*)
- cpu/blackfin/interrupt.o (.text .text.*)
- cpu/blackfin/serial.o (.text .text.*)
- common/dlmalloc.o (.text .text.*)
- lib_generic/crc32.o (.text .text.*)
-
- . = DEFINED(env_offset) ? env_offset : .;
- common/env_embedded.o (.text .text.*)
-#endif
-
- __initcode_start = .;
- cpu/blackfin/initcode.o (.text .text.*)
- __initcode_end = .;
-
- *(.text .text.*)
- } >ram
-
- .rodata :
- {
- . = ALIGN(4);
- *(.rodata .rodata.*)
- *(.rodata1)
- *(.eh_frame)
- . = ALIGN(4);
- } >ram
-
- .data :
- {
- . = ALIGN(256);
- *(.data .data.*)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
- } >ram
-
- .u_boot_cmd :
- {
- ___u_boot_cmd_start = .;
- *(.u_boot_cmd)
- ___u_boot_cmd_end = .;
- } >ram
-
- .text_l1 :
- {
- . = ALIGN(4);
- __stext_l1 = .;
- *(.l1.text)
- . = ALIGN(4);
- __etext_l1 = .;
- } >l1_code AT>ram
- __stext_l1_lma = LOADADDR(.text_l1);
-
- .data_l1 :
- {
- . = ALIGN(4);
- __sdata_l1 = .;
- *(.l1.data)
- *(.l1.bss)
- . = ALIGN(4);
- __edata_l1 = .;
- } >l1_data AT>ram
- __sdata_l1_lma = LOADADDR(.data_l1);
-
- .bss :
- {
- . = ALIGN(4);
- __bss_start = .;
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss .bss.*)
- *(COMMON)
- __bss_end = .;
- } >ram
-}
+++ /dev/null
-/u-boot.lds
OBJS := $(addprefix $(obj),$(COBJS-y))
SOBJS := $(addprefix $(obj),$(SOBJS-y))
-$(LIB): $(obj).depend $(OBJS) $(SOBJS) $(obj)u-boot.lds
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
-$(obj)u-boot.lds: u-boot.lds.S
- $(CPP) $(CPPFLAGS) -D__ASSEMBLY__ -P $^ > $@
-
clean:
rm -f $(SOBJS) $(OBJS)
# This is not actually used for Blackfin boards so do not change it
#TEXT_BASE = do-not-use-me
-LDSCRIPT = $(obj)board/$(BOARDDIR)/u-boot.lds
-
# Set some default LDR flags based on boot mode.
LDR_FLAGS-BFIN_BOOT_PARA := --bits 16
LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))
+++ /dev/null
-/*
- * U-boot - u-boot.lds.S
- *
- * Copyright (c) 2005-2008 Analog Device Inc.
- *
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <asm/blackfin.h>
-#undef ALIGN
-#undef ENTRY
-#undef bfin
-
-/* If we don't actually load anything into L1 data, this will avoid
- * a syntax error. If we do actually load something into L1 data,
- * we'll get a linker memory load error (which is what we'd want).
- * This is here in the first place so we can quickly test building
- * for different CPU's which may lack non-cache L1 data.
- */
-#ifndef L1_DATA_B_SRAM
-# define L1_DATA_B_SRAM CONFIG_SYS_MONITOR_BASE
-# define L1_DATA_B_SRAM_SIZE 0
-#endif
-
-/* The 0xC offset is so we don't clobber the tiny LDR jump block. */
-#ifdef CONFIG_BFIN_BOOTROM_USES_EVT1
-# define L1_CODE_ORIGIN L1_INST_SRAM
-#else
-# define L1_CODE_ORIGIN L1_INST_SRAM + 0xC
-#endif
-
-OUTPUT_ARCH(bfin)
-
-MEMORY
-{
- ram : ORIGIN = CONFIG_SYS_MONITOR_BASE, LENGTH = CONFIG_SYS_MONITOR_LEN
- l1_code : ORIGIN = L1_CODE_ORIGIN, LENGTH = L1_INST_SRAM_SIZE
- l1_data : ORIGIN = L1_DATA_B_SRAM, LENGTH = L1_DATA_B_SRAM_SIZE
-}
-
-ENTRY(_start)
-SECTIONS
-{
- .text :
- {
- cpu/blackfin/start.o (.text .text.*)
-
-#ifdef ENV_IS_EMBEDDED
- /* WARNING - the following is hand-optimized to fit within
- * the sector before the environment sector. If it throws
- * an error during compilation remove an object here to get
- * it linked after the configuration sector.
- */
-
- cpu/blackfin/traps.o (.text .text.*)
- cpu/blackfin/interrupt.o (.text .text.*)
- cpu/blackfin/serial.o (.text .text.*)
- common/dlmalloc.o (.text .text.*)
- lib_generic/crc32.o (.text .text.*)
- lib_generic/zlib.o (.text .text.*)
- board/ibf-dsp561/ibf-dsp561.o (.text .text.*)
-
- . = DEFINED(env_offset) ? env_offset : .;
- common/env_embedded.o (.text .text.*)
-#endif
-
- __initcode_start = .;
- cpu/blackfin/initcode.o (.text .text.*)
- __initcode_end = .;
-
- *(.text .text.*)
- } >ram
-
- .rodata :
- {
- . = ALIGN(4);
- *(.rodata .rodata.*)
- *(.rodata1)
- *(.eh_frame)
- . = ALIGN(4);
- } >ram
-
- .data :
- {
- . = ALIGN(256);
- *(.data .data.*)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
- } >ram
-
- .u_boot_cmd :
- {
- ___u_boot_cmd_start = .;
- *(.u_boot_cmd)
- ___u_boot_cmd_end = .;
- } >ram
-
- .text_l1 :
- {
- . = ALIGN(4);
- __stext_l1 = .;
- *(.l1.text)
- . = ALIGN(4);
- __etext_l1 = .;
- } >l1_code AT>ram
- __stext_l1_lma = LOADADDR(.text_l1);
-
- .data_l1 :
- {
- . = ALIGN(4);
- __sdata_l1 = .;
- *(.l1.data)
- *(.l1.bss)
- . = ALIGN(4);
- __edata_l1 = .;
- } >l1_data AT>ram
- __sdata_l1_lma = LOADADDR(.data_l1);
-
- .bss :
- {
- . = ALIGN(4);
- __bss_start = .;
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss .bss.*)
- *(COMMON)
- __bss_end = .;
- } >ram
-}
+++ /dev/null
-/u-boot.lds
OBJS := $(addprefix $(obj),$(COBJS-y))
SOBJS := $(addprefix $(obj),$(SOBJS-y))
-$(LIB): $(obj).depend $(OBJS) $(SOBJS) $(obj)u-boot.lds
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
-$(obj)u-boot.lds: u-boot.lds.S
- $(CPP) $(CPPFLAGS) -D__ASSEMBLY__ -P $^ > $@
-
clean:
rm -f $(SOBJS) $(OBJS)
# This is not actually used for Blackfin boards so do not change it
#TEXT_BASE = do-not-use-me
-LDSCRIPT = $(obj)board/$(BOARDDIR)/u-boot.lds
-
# Set some default LDR flags based on boot mode.
LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 8
LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))
+++ /dev/null
-/*
- * U-boot - u-boot.lds.S
- *
- * Copyright (c) 2005-2008 Analog Device Inc.
- *
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <asm/blackfin.h>
-#undef ALIGN
-#undef ENTRY
-#undef bfin
-
-/* If we don't actually load anything into L1 data, this will avoid
- * a syntax error. If we do actually load something into L1 data,
- * we'll get a linker memory load error (which is what we'd want).
- * This is here in the first place so we can quickly test building
- * for different CPU's which may lack non-cache L1 data.
- */
-#ifndef L1_DATA_B_SRAM
-# define L1_DATA_B_SRAM CONFIG_SYS_MONITOR_BASE
-# define L1_DATA_B_SRAM_SIZE 0
-#endif
-
-OUTPUT_ARCH(bfin)
-
-MEMORY
-{
- ram : ORIGIN = CONFIG_SYS_MONITOR_BASE, LENGTH = CONFIG_SYS_MONITOR_LEN
- l1_code : ORIGIN = L1_INST_SRAM, LENGTH = L1_INST_SRAM_SIZE
- l1_data : ORIGIN = L1_DATA_B_SRAM, LENGTH = L1_DATA_B_SRAM_SIZE
-}
-
-ENTRY(_start)
-SECTIONS
-{
- .text :
- {
- cpu/blackfin/start.o (.text .text.*)
-
-#ifdef ENV_IS_EMBEDDED
- /* WARNING - the following is hand-optimized to fit within
- * the sector before the environment sector. If it throws
- * an error during compilation remove an object here to get
- * it linked after the configuration sector.
- */
-
- cpu/blackfin/traps.o (.text .text.*)
- cpu/blackfin/interrupt.o (.text .text.*)
- cpu/blackfin/serial.o (.text .text.*)
- common/dlmalloc.o (.text .text.*)
- lib_generic/crc32.o (.text .text.*)
-
- . = DEFINED(env_offset) ? env_offset : .;
- common/env_embedded.o (.text .text.*)
-#endif
-
- __initcode_start = .;
- cpu/blackfin/initcode.o (.text .text.*)
- __initcode_end = .;
-
- *(.text .text.*)
- } >ram
-
- .rodata :
- {
- . = ALIGN(4);
- *(.rodata .rodata.*)
- *(.rodata1)
- *(.eh_frame)
- . = ALIGN(4);
- } >ram
-
- .data :
- {
- . = ALIGN(256);
- *(.data .data.*)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
- } >ram
-
- .u_boot_cmd :
- {
- ___u_boot_cmd_start = .;
- *(.u_boot_cmd)
- ___u_boot_cmd_end = .;
- } >ram
-
- .text_l1 :
- {
- . = ALIGN(4);
- __stext_l1 = .;
- *(.l1.text)
- . = ALIGN(4);
- __etext_l1 = .;
- } >l1_code AT>ram
- __stext_l1_lma = LOADADDR(.text_l1);
-
- .data_l1 :
- {
- . = ALIGN(4);
- __sdata_l1 = .;
- *(.l1.data)
- *(.l1.bss)
- . = ALIGN(4);
- __edata_l1 = .;
- } >l1_data AT>ram
- __sdata_l1_lma = LOADADDR(.data_l1);
-
- .bss :
- {
- . = ALIGN(4);
- __bss_start = .;
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss .bss.*)
- *(COMMON)
- __bss_end = .;
- } >ram
-}
#else
#define ENV_IS_EMBEDDED_CUSTOM
#endif
+#ifdef ENV_IS_EMBEDDED
+/* WARNING - the following is hand-optimized to fit within
+ * the sector before the environment sector. If it throws
+ * an error during compilation remove an object here to get
+ * it linked after the configuration sector.
+ */
+# define LDS_BOARD_TEXT \
+ cpu/blackfin/traps.o (.text .text.*); \
+ cpu/blackfin/interrupt.o (.text .text.*); \
+ cpu/blackfin/serial.o (.text .text.*); \
+ common/dlmalloc.o (.text .text.*); \
+ lib_generic/crc32.o (.text .text.*); \
+ . = DEFINED(env_offset) ? env_offset : .; \
+ common/env_embedded.o (.text .text.*);
+#endif
/*
#endif
#define CONFIG_ENV_SIZE 0x1000
#define CONFIG_ENV_SECT_SIZE 0x2000
+#ifdef ENV_IS_EMBEDDED
+/* WARNING - the following is hand-optimized to fit within
+ * the sector before the environment sector. If it throws
+ * an error during compilation remove an object here to get
+ * it linked after the configuration sector.
+ */
+# define LDS_BOARD_TEXT \
+ cpu/blackfin/traps.o (.text .text.*); \
+ cpu/blackfin/interrupt.o (.text .text.*); \
+ cpu/blackfin/serial.o (.text .text.*); \
+ common/dlmalloc.o (.text .text.*); \
+ lib_generic/crc32.o (.text .text.*); \
+ . = DEFINED(env_offset) ? env_offset : .; \
+ common/env_embedded.o (.text .text.*);
+#endif
/*
#else
#define ENV_IS_EMBEDDED_CUSTOM
#endif
+#ifdef ENV_IS_EMBEDDED
+/* WARNING - the following is hand-optimized to fit within
+ * the sector before the environment sector. If it throws
+ * an error during compilation remove an object here to get
+ * it linked after the configuration sector.
+ */
+# define LDS_BOARD_TEXT \
+ cpu/blackfin/traps.o (.text .text.*); \
+ cpu/blackfin/interrupt.o (.text .text.*); \
+ cpu/blackfin/serial.o (.text .text.*); \
+ common/dlmalloc.o (.text .text.*); \
+ lib_generic/crc32.o (.text .text.*); \
+ . = DEFINED(env_offset) ? env_offset : .; \
+ common/env_embedded.o (.text .text.*);
+#endif
/*
#else
#define ENV_IS_EMBEDDED_CUSTOM
#endif
+#ifdef ENV_IS_EMBEDDED
+/* WARNING - the following is hand-optimized to fit within
+ * the sector before the environment sector. If it throws
+ * an error during compilation remove an object here to get
+ * it linked after the configuration sector.
+ */
+# define LDS_BOARD_TEXT \
+ cpu/blackfin/traps.o (.text .text.*); \
+ cpu/blackfin/interrupt.o (.text .text.*); \
+ cpu/blackfin/serial.o (.text .text.*); \
+ common/dlmalloc.o (.text .text.*); \
+ lib_generic/crc32.o (.text .text.*); \
+ . = DEFINED(env_offset) ? env_offset : .; \
+ common/env_embedded.o (.text .text.*);
+#endif
/*
#else
#define ENV_IS_EMBEDDED_CUSTOM
#endif
+#ifdef ENV_IS_EMBEDDED
+/* WARNING - the following is hand-optimized to fit within
+ * the sector before the environment sector. If it throws
+ * an error during compilation remove an object here to get
+ * it linked after the configuration sector.
+ */
+# define LDS_BOARD_TEXT \
+ cpu/blackfin/traps.o (.text .text.*); \
+ cpu/blackfin/interrupt.o (.text .text.*); \
+ cpu/blackfin/serial.o (.text .text.*); \
+ common/dlmalloc.o (.text .text.*); \
+ lib_generic/crc32.o (.text .text.*); \
+ lib_generic/zlib.o (.text .text.*); \
+ board/bf561-ezkit/bf561-ezkit.o (.text .text.*); \
+ . = DEFINED(env_offset) ? env_offset : .; \
+ common/env_embedded.o (.text .text.*);
+#endif
/*
#else
#define ENV_IS_EMBEDDED_CUSTOM
#endif
+#ifdef ENV_IS_EMBEDDED
+/* WARNING - the following is hand-optimized to fit within
+ * the sector before the environment sector. If it throws
+ * an error during compilation remove an object here to get
+ * it linked after the configuration sector.
+ */
+# define LDS_BOARD_TEXT \
+ cpu/blackfin/traps.o (.text .text.*); \
+ cpu/blackfin/interrupt.o (.text .text.*); \
+ cpu/blackfin/serial.o (.text .text.*); \
+ common/dlmalloc.o (.text .text.*); \
+ lib_generic/crc32.o (.text .text.*); \
+ . = DEFINED(env_offset) ? env_offset : .; \
+ common/env_embedded.o (.text .text.*);
+#endif
/*
#else
#define ENV_IS_EMBEDDED_CUSTOM
#endif
+#ifdef ENV_IS_EMBEDDED
+/* WARNING - the following is hand-optimized to fit within
+ * the sector before the environment sector. If it throws
+ * an error during compilation remove an object here to get
+ * it linked after the configuration sector.
+ */
+# define LDS_BOARD_TEXT \
+ cpu/blackfin/traps.o (.text .text.*); \
+ cpu/blackfin/interrupt.o (.text .text.*); \
+ cpu/blackfin/serial.o (.text .text.*); \
+ common/dlmalloc.o (.text .text.*); \
+ lib_generic/crc32.o (.text .text.*); \
+ lib_generic/zlib.o (.text .text.*); \
+ board/ibf-dsp561/ibf-dsp561.o (.text .text.*); \
+ . = DEFINED(env_offset) ? env_offset : .; \
+ common/env_embedded.o (.text .text.*);
+#endif
/*
#else
#define ENV_IS_EMBEDDED_CUSTOM
#endif
+#ifdef ENV_IS_EMBEDDED
+/* WARNING - the following is hand-optimized to fit within
+ * the sector before the environment sector. If it throws
+ * an error during compilation remove an object here to get
+ * it linked after the configuration sector.
+ */
+# define LDS_BOARD_TEXT \
+ cpu/blackfin/traps.o (.text .text.*); \
+ cpu/blackfin/interrupt.o (.text .text.*); \
+ cpu/blackfin/serial.o (.text .text.*); \
+ common/dlmalloc.o (.text .text.*); \
+ lib_generic/crc32.o (.text .text.*); \
+ . = DEFINED(env_offset) ? env_offset : .; \
+ common/env_embedded.o (.text .text.*);
+#endif
/*
--- /dev/null
+u-boot.lds
SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
OBJS := $(addprefix $(obj),$(SOBJS-y) $(COBJS-y))
-$(LIB): $(obj).depend $(OBJS)
+$(LIB): $(obj).depend $(OBJS) $(obj)u-boot.lds
$(AR) $(ARFLAGS) $@ $(OBJS)
+$(obj)u-boot.lds: u-boot.lds.S
+ $(CPP) $(CPPFLAGS) -D__ASSEMBLY__ -P $^ > $@
+
#########################################################################
# defines $(obj).depend target
#undef ENTRY
#undef bfin
+#ifndef LDS_BOARD_TEXT
+# define LDS_BOARD_TEXT
+#endif
+
/* If we don't actually load anything into L1 data, this will avoid
* a syntax error. If we do actually load something into L1 data,
* we'll get a linker memory load error (which is what we'd want).
.text :
{
cpu/blackfin/start.o (.text .text.*)
+
+ LDS_BOARD_TEXT
+
__initcode_start = .;
cpu/blackfin/initcode.o (.text .text.*)
__initcode_end = .;
+
*(.text .text.*)
} >ram
projects / u-boot.git / commitdiff