spi: kirkwood_spi: Add support for multiple chip-selects on MVEBU

Currently only chip-select 0 is supported by the kirkwood SPI driver.
The Armada XP / 38x SoCs also use this driver and support multiple chip
selects. This patch adds support for multiple CS on MVEBU.

The register definitions are restructured a bit with this patch. Grouping
them to the corresponding registers.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Luka Perkov <luka.perkov@sartura.hr>
Reviewed-by: Jagan Teki <jteki@openedev.com>

diff --git a/arch/arm/include/asm/arch-mvebu/spi.h b/arch/arm/include/asm/arch-mvebu/spi.h
index 526fea68e6a363f8272e0fb1bd37e40220d33961..78869a253d1f604427ae70101ea78261bba99f54 100644 (file)
--- a/arch/arm/include/asm/arch-mvebu/spi.h
+++ b/arch/arm/include/asm/arch-mvebu/spi.h
@@ -35,13 +35,15 @@ struct kwspi_registers {
 #define SCK_MPP10      (1 << 1)
 #define MISO_MPP11     (1 << 2)
 
+/* Control Register */
+#define KWSPI_CSN_ACT          (1 << 0) /* Activates serial memory interface */
+#define KWSPI_SMEMRDY          (1 << 1) /* SerMem Data xfer ready */
+#define KWSPI_CS_SHIFT         2       /* chip select shift */
+#define KWSPI_CS_MASK          0x7     /* chip select mask */
+
+/* Configuration Register */
 #define KWSPI_CLKPRESCL_MASK   0x1f
 #define KWSPI_CLKPRESCL_MIN    0x12
-#define KWSPI_CSN_ACT          1 /* Activates serial memory interface */
-#define KWSPI_SMEMRDY          (1 << 1) /* SerMem Data xfer ready */
-#define KWSPI_IRQUNMASK                1 /* unmask SPI interrupt */
-#define KWSPI_IRQMASK          0 /* mask SPI interrupt */
-#define KWSPI_SMEMRDIRQ                1 /* SerMem data xfer ready irq */
 #define KWSPI_XFERLEN_1BYTE    0
 #define KWSPI_XFERLEN_2BYTE    (1 << 5)
 #define KWSPI_XFERLEN_MASK     (1 << 5)
@@ -50,6 +52,11 @@ struct kwspi_registers {
 #define KWSPI_ADRLEN_3BYTE     (2 << 8)
 #define KWSPI_ADRLEN_4BYTE     (3 << 8)
 #define KWSPI_ADRLEN_MASK      (3 << 8)
+
+#define KWSPI_IRQUNMASK                1 /* unmask SPI interrupt */
+#define KWSPI_IRQMASK          0 /* mask SPI interrupt */
+#define KWSPI_SMEMRDIRQ                1 /* SerMem data xfer ready irq */
+
 #define KWSPI_TIMEOUT          10000
 
 #endif /* __KW_SPI_H__ */

diff --git a/drivers/spi/kirkwood_spi.c b/drivers/spi/kirkwood_spi.c
index 80cdbd08fc31437794f36b51b4567ccfeba58daf..6851ba942f51a14d72779f9c78eb5e0783ee7c32 100644 (file)
--- a/drivers/spi/kirkwood_spi.c
+++ b/drivers/spi/kirkwood_spi.c
@@ -283,6 +283,19 @@ static int mvebu_spi_xfer(struct udevice *dev, unsigned int bitlen,
        return _spi_xfer(plat->spireg, bitlen, dout, din, flags);
 }
 
+static int mvebu_spi_claim_bus(struct udevice *dev)
+{
+       struct udevice *bus = dev->parent;
+       struct mvebu_spi_platdata *plat = dev_get_platdata(bus);
+
+       /* Configure the chip-select in the CTRL register */
+       clrsetbits_le32(&plat->spireg->ctrl,
+                       KWSPI_CS_MASK << KWSPI_CS_SHIFT,
+                       spi_chip_select(dev) << KWSPI_CS_SHIFT);
+
+       return 0;
+}
+
 static int mvebu_spi_probe(struct udevice *bus)
 {
        struct mvebu_spi_platdata *plat = dev_get_platdata(bus);
@@ -305,6 +318,7 @@ static int mvebu_spi_ofdata_to_platdata(struct udevice *bus)
 }
 
 static const struct dm_spi_ops mvebu_spi_ops = {
+       .claim_bus      = mvebu_spi_claim_bus,
        .xfer           = mvebu_spi_xfer,
        .set_speed      = mvebu_spi_set_speed,
        .set_mode       = mvebu_spi_set_mode,