-Running U-Boot from coreboot on Chromebooks
-===========================================
+Chromium OS Support in U-Boot
+=============================
-U-Boot can be used as a secondary boot loader in a few situations such as from
-UEFI and coreboot (see README.x86). Recent Chromebooks use coreboot even on
-ARM platforms to start up the machine.
+Introduction
+------------
-This document aims to provide a guide to booting U-Boot on a Chromebook. It
-is only a starting point, and there are many guides on the interwebs. But
-placing this information in the U-Boot tree should make it easier to find for
-those who use U-Boot habitually.
+This describes how to use U-Boot with Chromium OS. Several options are
+available:
-Most of these platforms are supported by U-Boot natively, but it is risky to
-replace the ROM unless you have a servo board and cable to restore it with.
+ - Running U-Boot from the 'altfw' feature, which is available on selected
+ Chromebooks from 2019 onwards (initially Grunt). Press '1' from the
+ developer-mode screen to get into U-Boot. See here for details:
+ https://sites.google.com/a/chromium.org/dev/chromium-os/poking-around-your-chrome-os-device?pli=1
+ - Running U-Boot from the disk partition. This involves signing U-Boot and
+ placing it on the disk, for booting as a 'kernel'. See
+ README.chromium-chainload for information on this. This is the only
+ option on non-U-Boot Chromebooks from 2013 to 2018 and is somewhat
+ more involved.
-For all of these the standard U-Boot build instructions apply. For example on
-ARM:
+ - Running U-Boot with Chromium OS verified boot. This allows U-Boot to be
+ used instead of either or both of depthcharge (a bootloader which forked
+ from U-Boot in 2013) and coreboot. See below for more information on
+ this.
- sudo apt install gcc-arm-linux-gnueabi
- mkdir b
- make O=b/nyan_big CROSS_COMPILE=arm-linux-gnueabi- nyan-big_defconfig all
-You can obtain the vbutil_kernel utility here:
+U-Boot with Chromium OS verified boot
+-------------------------------------
- https://drive.google.com/open?id=0B7WYZbZ9zd-3dHlVVXo4VXE2T0U
+To obtain:
+ git clone https://github.com/sglass68/u-boot.git
+ cd u-boot
+ git checkout cros-master
-Snow (Samsung ARM Chromebook)
------------------------------
+To build for sandbox:
-See here:
+ UB=/tmp/b/chromeos_sandbox # U-Boot build directory
+ CROS=/home/sglass/cosarm # Chromium OS directory
+ make O=$UB/chromeos_sandbox_defconfig
+ make O=$UB -j20 -s VBOOT_SOURCE=$CROS/src/platform/vboot_reference \
+ MAKEFLAGS_VBOOT=DEBUG=1 QUIET=1
-https://www.chromium.org/chromium-os/firmware-porting-guide/using-nv-u-boot-on-the-samsung-arm-chromebook
+Replace sandbox with another supported target.
+This produces $UB/image.bin which contains the firmware binaries in a SPI
+flash image.
-Nyan-big
---------
-
-Compiled based on information here:
-https://lists.denx.de/pipermail/u-boot/2015-March/209530.html
-https://git.collabora.com/cgit/user/tomeu/u-boot.git/commit/?h=nyan-big
-https://lists.denx.de/pipermail/u-boot/2017-May/289491.html
-https://github.com/chromeos-nvidia-androidtv/gnu-linux-on-acer-chromebook-13#copy-data-to-the-sd-card
-
-1. Build U-Boot
-
- mkdir b
- make -j8 O=b/nyan-big CROSS_COMPILE=arm-linux-gnueabi- nyan-big_defconfig all
-
-
-2. Select a .its file
-
-Select something from doc/chromium which matches your board, or create your
-own.
-
-Note that the device tree node is required, even though it is not actually
-used by U-Boot. This is because the Chromebook expects to pass it to the
-kernel, and crashes if it is not present.
-
-
-3. Build and sign an image
-
- ./b/nyan-big/tools/mkimage -f doc/chromium/nyan-big.its u-boot-chromium.fit
- echo test >dummy.txt
- vbutil_kernel --arch arm --keyblock doc/chromium/devkeys/kernel.keyblock \
- --signprivate doc/chromium/devkeys/kernel_data_key.vbprivk \
- --version 1 --config dummy.txt --vmlinuz u-boot-chromium.fit \
- --bootloader dummy.txt --pack u-boot.kpart
-
-
-4. Prepare an SD card
-
- DISK=/dev/sdc # Replace with your actual SD card device
- sudo cgpt create $DISK
- sudo cgpt add -b 34 -s 32768 -P 1 -S 1 -t kernel $DISK
- sudo cgpt add -b 32802 -s 2000000 -t rootfs $DISK
- sudo gdisk $DISK # Enter command 'w' to write a protective MBR to the disk
-
-
-5. Write U-Boot to the SD card
+To run on sandbox:
- sudo dd if=u-boot.kpart of=/dev/sdc1; sync
+ $UB/tpl/u-boot-tpl -d $UB/u-boot.dtb.out \
+ -L6 -c "host bind 0 $CROS/src/build/images/cheza/latest/chromiumos_image.bin; vboot go auto" \
+ -l -w -s state.dtb -r
+To run on other boards:
+ Install image.bin in the SPI flash of your device
+ Boot your system
-6. Start it up
-Reboot the device in dev mode. Make sure that you have USB booting enabled. To
-do this, login as root (via Ctrl-Alt-forward_arrow) and type
-'enable_dev_usb_boot'. You only need to do this once.
+Sandbox
+-------
-Reboot the device with the SD card inserted. Press Clrl-U at the developer
-mode screen. It should show something like the following on the display:
+Most Chromium OS development with U-Boot is undertaken using sandbox. There is
+a sandbox target available (chromeos_sandbox) which allows running U-Boot on
+a Linux machine completion with emulations of the display, TPM, disk, etc.
- U-Boot 2017.07-00637-g242eb42-dirty (May 22 2017 - 06:14:21 -0600)
+Running sandbox starts TPL, which contains the first phase of vboot, providing
+a device tree and binding a Chromium OS disk image for use to find kernels
+(any Chromium OS image will do). It also saves driver state between U-Boot
+phases into state.dtb and will automatically ensure that memory is shared
+between all phases. TPL will jump to SPL and then on to U-Boot proper.
- Model: Acer Chromebook 13 CB5-311
- Board: Google/NVIDIA Nyan-big, ID: 1
+It is possible to run with debugging on, e.g.
- Net: No ethernet found.
- Hit any key to stop autoboot: 0
- Tegra124 (Nyan-big) #
+ gdb --args $UB/tpl/u-boot-tpl -d ....
+Breakpoints can be set in any U-Boot phase. Overall this is a good debugging
+environment for new verified-boot features.
-7. Known problems
-On the serial console the word MMC is chopped at the start of the line:
+Samus
+-----
-C: sdhci@700b0000: 2, sdhci@700b0400: 1, sdhci@700b0600: 0
+Basic support is available for samus, using the chromeos_samus target. If you
+have an em100, use:
-This is likely due to some problem with change-over of the serial driver
-during relocation (or perhaps updating the clock setup in board_init()).
+ sudo em100 -s -c W25Q128FW -d $UB/image.bin -t -r
+to write the image and then boot samus (Power-Refresh).
-9. Notes
-To check that you copied the u-boot.its file correctly, use these commands.
-You should see that the data at 0x100 in u-boot-chromium.fit is the first few
-bytes of U-Boot:
+Boot flow
+---------
- hd u-boot-chromium.fit |head -20
- ...
- 00000100 b8 00 00 ea 14 f0 9f e5 14 f0 9f e5 14 f0 9f e5 |................|
+Verified boot starts in TPL, which selects the A or B SPL, which in turn selects
+the A or B U-Boot. Then this jumps to the selected kernel. If anything goes
+wrong, the device reboots and the recovery SPL and U-Boot are used instead.
- hd b/nyan-big/u-boot.bin |head
- 00000000 b8 00 00 ea 14 f0 9f e5 14 f0 9f e5 14 f0 9f e5 |................|
+More details are available here:
+ https://www.chromium.org/chromium-os/chromiumos-design-docs/firmware-boot-and-recovery
-The 'data' property of the FIT is set up to start at offset 0x100 bytes into
-the file. The change to CONFIG_SYS_TEXT_BASE is also an offset of 0x100 bytes
-from the load address. If this changes, you either need to modify U-Boot to be
-fully relocatable, or expect it to hang.
+New uclasses
+------------
-chromebook_jerry
-----------------
+Several uclasses are provided in cros/:
-The instruction are similar to those for Nyan with changes as noted below:
+ UCLASS_CROS_AUX_FW Chrome OS auxiliary firmware
+ UCLASS_CROS_FWSTORE Chrome OS firmware storage
+ UCLASS_CROS_NVDATA Chrome OS non-volatile data device
+ UCLASS_CROS_VBOOT_EC Chrome OS vboot EC operations
+ UCLASS_CROS_VBOOT_FLAG Chrome OS verified boot flag
-1. Patch U-Boot
+The existing UCLASS_CROS_EC is also used.
-Open include/configs/rk3288_common.h
-Change:
-
-#define CONFIG_SYS_TEXT_BASE 0x00100000
-
-to:
-
-#define CONFIG_SYS_TEXT_BASE 0x02000100
-
-
-
-2. Build U-Boot
-
- mkdir b
- make -j8 O=b/chromebook_jerry CROSS_COMPILE=arm-linux-gnueabi- \
- chromebook_jerry_defconfig all
-
-
-3. See above
-
-4. Build and sign an image
-
- ./b/chromebook_jerry/tools/mkimage -f doc/chromium/chromebook_jerry.its \
- u-boot-chromium.fit
- echo test >dummy.txt
- vbutil_kernel --arch arm --keyblock doc/chromium/devkeys/kernel.keyblock \
- --signprivate doc/chromium/devkeys/kernel_data_key.vbprivk \
- --version 1 --config dummy.txt --vmlinuz u-boot-chromium.fit \
- --bootloader dummy.txt --pack u-boot.kpart
-
-
-5. See above
+Commands
+--------
-6. See above
+A new 'vboot' command is provided to run particular vboot stages. The most
+useful command is 'vboot go auto', which continues where the last stage left
+off.
-7. Start it up
+Note that TPL and SPL do not supports commands as yet, so the vboot code is
+called directly from the SPL boot devices (BOOT_DEVICE_CROS_VBOOT). See
+cros_load_image_tpl() and cros_load_image_spl() which both call
+vboot_run_auto().
-Reboot the device in dev mode. Make sure that you have USB booting enabled. To
-do this, login as root (via Ctrl-Alt-forward_arrow) and type
-'enable_dev_usb_boot'. You only need to do this once.
-Reboot the device with the SD card inserted. Press Clrl-U at the developer
-mode screen. It should show something like the following on the display:
+Config options
+--------------
- U-Boot 2017.05-00649-g72acdbf-dirty (May 29 2017 - 14:57:05 -0600)
+The main option is CONFIG_CHROMEOS, which enables a wide array of other options
+so that the required features are present.
- Model: Google Jerry
- Net: Net Initialization Skipped
- No ethernet found.
- Hit any key to stop autoboot: 0
+Device-tree config
+------------------
-8. Known problems
+Various options are available which control the operation of verified boot.
+See cros/dts/bindings/config.txt for details. Most config is handled at run-
+time, although build-time config (with Kconfig) could also be added fairly
+easily.
-None as yet.
+Porting to other hardware
+-------------------------
-9. Notes
+A basic port to samus (Chromebook Pixel 2015) is in a basic working state,
+using the chromeos_samus target. Patches will likely be forthcoming in early
+2019. Ports to an ARM board and coreboot (for x86 Chromebooks) are in the
+dreaming state.
-None as yet.
+Tests
+-----
-Other notes
-===========
+Chromium OS firmware has a very limited set of tests. The tests that originally
+existed in U-Boot were not brought over to coreboot or depthcharge.
-flashrom
---------
+The U-Boot tests ('make check') do operate, but at present there are no
+Chromium OS tests available. These will hopefully come together over time. Of
+course the above sandbox feature provides a sort of functional test and can
+detecte problems that affect the flow or particular vboot features.
- Used to make a backup of your firmware, or to replace it.
- See: https://www.chromium.org/chromium-os/packages/cros-flashrom
+TO DO
+-----
+- Support for booting from coreboot (patches expected March 2019)
+- Support for booting from an ARM board, e.g. bob
-coreboot
---------
-Coreboot itself is not designed to actually boot an OS. Instead, a program
-called Depthcharge is used. This originally came out of U-Boot and was then
-heavily hacked and modified such that is is almost unrecognisable. It does
-include a very small part of the U-Boot command-line interface but is not
-usable as a general-purpose boot loader.
-
-In addition, it has a very unusual design in that it does not do device init
-itself, but instead relies on coreboot. This is similar to (in U-Boot) having
-a SPI driver with an empty probe() method, relying on whatever was set up
-beforehand. It can be quite hard to figure out between these two code bases
-what settings are actually used. When chain-loading into U-Boot we must be
-careful to reinit anything that U-Boot expects. If not, some peripherals (or
-the whole machine) may not work. This makes the process of chainloading more
-complicated than it could be on some platforms.
-
-Finally, it supports only a subset of the U-Boot's FIT format. In particular
-it uses a fixed address to load the FIT and does not support load/exec
-addresses. This means that U-Boot must be able to boot from whatever
-address Depthcharge happens to use (it is the CONFIG_KERNEL_START setting
-in Depthcharge). In practice this means that the data in the kernel@1 FIT node
-(see above) must start at the same address as U-Boot's CONFIG_SYS_TEXT_BASE.
+Simon Glass
+sjg@chromium.org
+7 October 2018
--- /dev/null
+Running U-Boot from coreboot on Chromebooks
+===========================================
+
+U-Boot can be used as a secondary boot loader in a few situations such as from
+UEFI and coreboot (see README.x86). Recent Chromebooks use coreboot even on
+ARM platforms to start up the machine.
+
+This document aims to provide a guide to booting U-Boot on a Chromebook. It
+is only a starting point, and there are many guides on the interwebs. But
+placing this information in the U-Boot tree should make it easier to find for
+those who use U-Boot habitually.
+
+Most of these platforms are supported by U-Boot natively, but it is risky to
+replace the ROM unless you have a servo board and cable to restore it with.
+
+
+For all of these the standard U-Boot build instructions apply. For example on
+ARM:
+
+ sudo apt install gcc-arm-linux-gnueabi
+ mkdir b
+ make O=b/nyan_big CROSS_COMPILE=arm-linux-gnueabi- nyan-big_defconfig all
+
+You can obtain the vbutil_kernel utility here:
+
+ https://drive.google.com/open?id=0B7WYZbZ9zd-3dHlVVXo4VXE2T0U
+
+
+Snow (Samsung ARM Chromebook)
+-----------------------------
+
+See here:
+
+https://www.chromium.org/chromium-os/firmware-porting-guide/using-nv-u-boot-on-the-samsung-arm-chromebook
+
+
+Nyan-big
+--------
+
+Compiled based on information here:
+https://lists.denx.de/pipermail/u-boot/2015-March/209530.html
+https://git.collabora.com/cgit/user/tomeu/u-boot.git/commit/?h=nyan-big
+https://lists.denx.de/pipermail/u-boot/2017-May/289491.html
+https://github.com/chromeos-nvidia-androidtv/gnu-linux-on-acer-chromebook-13#copy-data-to-the-sd-card
+
+1. Build U-Boot
+
+ mkdir b
+ make -j8 O=b/nyan-big CROSS_COMPILE=arm-linux-gnueabi- nyan-big_defconfig all
+
+
+2. Select a .its file
+
+Select something from doc/chromium which matches your board, or create your
+own.
+
+Note that the device tree node is required, even though it is not actually
+used by U-Boot. This is because the Chromebook expects to pass it to the
+kernel, and crashes if it is not present.
+
+
+3. Build and sign an image
+
+ ./b/nyan-big/tools/mkimage -f doc/chromium/nyan-big.its u-boot-chromium.fit
+ echo test >dummy.txt
+ vbutil_kernel --arch arm --keyblock doc/chromium/devkeys/kernel.keyblock \
+ --signprivate doc/chromium/devkeys/kernel_data_key.vbprivk \
+ --version 1 --config dummy.txt --vmlinuz u-boot-chromium.fit \
+ --bootloader dummy.txt --pack u-boot.kpart
+
+
+4. Prepare an SD card
+
+ DISK=/dev/sdc # Replace with your actual SD card device
+ sudo cgpt create $DISK
+ sudo cgpt add -b 34 -s 32768 -P 1 -S 1 -t kernel $DISK
+ sudo cgpt add -b 32802 -s 2000000 -t rootfs $DISK
+ sudo gdisk $DISK # Enter command 'w' to write a protective MBR to the disk
+
+
+5. Write U-Boot to the SD card
+
+ sudo dd if=u-boot.kpart of=/dev/sdc1; sync
+
+
+6. Start it up
+
+Reboot the device in dev mode. Make sure that you have USB booting enabled. To
+do this, login as root (via Ctrl-Alt-forward_arrow) and type
+'enable_dev_usb_boot'. You only need to do this once.
+
+Reboot the device with the SD card inserted. Press Clrl-U at the developer
+mode screen. It should show something like the following on the display:
+
+ U-Boot 2017.07-00637-g242eb42-dirty (May 22 2017 - 06:14:21 -0600)
+
+ Model: Acer Chromebook 13 CB5-311
+ Board: Google/NVIDIA Nyan-big, ID: 1
+
+ Net: No ethernet found.
+ Hit any key to stop autoboot: 0
+ Tegra124 (Nyan-big) #
+
+
+7. Known problems
+
+On the serial console the word MMC is chopped at the start of the line:
+
+C: sdhci@700b0000: 2, sdhci@700b0400: 1, sdhci@700b0600: 0
+
+This is likely due to some problem with change-over of the serial driver
+during relocation (or perhaps updating the clock setup in board_init()).
+
+
+9. Notes
+
+To check that you copied the u-boot.its file correctly, use these commands.
+You should see that the data at 0x100 in u-boot-chromium.fit is the first few
+bytes of U-Boot:
+
+ hd u-boot-chromium.fit |head -20
+ ...
+ 00000100 b8 00 00 ea 14 f0 9f e5 14 f0 9f e5 14 f0 9f e5 |................|
+
+ hd b/nyan-big/u-boot.bin |head
+ 00000000 b8 00 00 ea 14 f0 9f e5 14 f0 9f e5 14 f0 9f e5 |................|
+
+
+The 'data' property of the FIT is set up to start at offset 0x100 bytes into
+the file. The change to CONFIG_SYS_TEXT_BASE is also an offset of 0x100 bytes
+from the load address. If this changes, you either need to modify U-Boot to be
+fully relocatable, or expect it to hang.
+
+
+chromebook_jerry
+----------------
+
+The instruction are similar to those for Nyan with changes as noted below:
+
+1. Patch U-Boot
+
+Open include/configs/rk3288_common.h
+
+Change:
+
+#define CONFIG_SYS_TEXT_BASE 0x00100000
+
+to:
+
+#define CONFIG_SYS_TEXT_BASE 0x02000100
+
+
+
+2. Build U-Boot
+
+ mkdir b
+ make -j8 O=b/chromebook_jerry CROSS_COMPILE=arm-linux-gnueabi- \
+ chromebook_jerry_defconfig all
+
+
+3. See above
+
+4. Build and sign an image
+
+ ./b/chromebook_jerry/tools/mkimage -f doc/chromium/chromebook_jerry.its \
+ u-boot-chromium.fit
+ echo test >dummy.txt
+ vbutil_kernel --arch arm --keyblock doc/chromium/devkeys/kernel.keyblock \
+ --signprivate doc/chromium/devkeys/kernel_data_key.vbprivk \
+ --version 1 --config dummy.txt --vmlinuz u-boot-chromium.fit \
+ --bootloader dummy.txt --pack u-boot.kpart
+
+
+5. See above
+
+6. See above
+
+7. Start it up
+
+Reboot the device in dev mode. Make sure that you have USB booting enabled. To
+do this, login as root (via Ctrl-Alt-forward_arrow) and type
+'enable_dev_usb_boot'. You only need to do this once.
+
+Reboot the device with the SD card inserted. Press Clrl-U at the developer
+mode screen. It should show something like the following on the display:
+
+ U-Boot 2017.05-00649-g72acdbf-dirty (May 29 2017 - 14:57:05 -0600)
+
+ Model: Google Jerry
+ Net: Net Initialization Skipped
+ No ethernet found.
+ Hit any key to stop autoboot: 0
+
+
+8. Known problems
+
+None as yet.
+
+
+9. Notes
+
+None as yet.
+
+
+Other notes
+===========
+
+flashrom
+--------
+
+ Used to make a backup of your firmware, or to replace it.
+
+ See: https://www.chromium.org/chromium-os/packages/cros-flashrom
+
+
+coreboot
+--------
+
+Coreboot itself is not designed to actually boot an OS. Instead, a program
+called Depthcharge is used. This originally came out of U-Boot and was then
+heavily hacked and modified such that is is almost unrecognisable. It does
+include a very small part of the U-Boot command-line interface but is not
+usable as a general-purpose boot loader.
+
+In addition, it has a very unusual design in that it does not do device init
+itself, but instead relies on coreboot. This is similar to (in U-Boot) having
+a SPI driver with an empty probe() method, relying on whatever was set up
+beforehand. It can be quite hard to figure out between these two code bases
+what settings are actually used. When chain-loading into U-Boot we must be
+careful to reinit anything that U-Boot expects. If not, some peripherals (or
+the whole machine) may not work. This makes the process of chainloading more
+complicated than it could be on some platforms.
+
+Finally, it supports only a subset of the U-Boot's FIT format. In particular
+it uses a fixed address to load the FIT and does not support load/exec
+addresses. This means that U-Boot must be able to boot from whatever
+address Depthcharge happens to use (it is the CONFIG_KERNEL_START setting
+in Depthcharge). In practice this means that the data in the kernel@1 FIT node
+(see above) must start at the same address as U-Boot's CONFIG_SYS_TEXT_BASE.
projects / u-boot.git / commitdiff