+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
/*
- * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017-2018 NXP.
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
*/
/dts-v1/;
model = "Freescale i.MX6SLL EVK Board";
compatible = "fsl,imx6sll-evk", "fsl,imx6sll";
- memory {
+ chosen {
+ stdout-path = &uart1;
+ };
+
+ memory@80000000 {
+ device_type = "memory";
reg = <0x80000000 0x80000000>;
};
- backlight {
+ backlight_display: backlight-display {
compatible = "pwm-backlight";
pwms = <&pwm1 0 5000000>;
brightness-levels = <0 4 8 16 32 64 128 255>;
status = "okay";
};
- battery: max8903@0 {
- compatible = "fsl,max8903-charger";
+ leds {
+ compatible = "gpio-leds";
pinctrl-names = "default";
- dok_input = <&gpio4 13 1>;
- uok_input = <&gpio4 13 1>;
- chg_input = <&gpio4 15 1>;
- flt_input = <&gpio4 14 1>;
- fsl,dcm_always_high;
- fsl,dc_valid;
- fsl,adc_disable;
- status = "okay";
+ pinctrl-0 = <&pinctrl_led>;
+
+ user {
+ label = "debug";
+ gpios = <&gpio2 4 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
};
- pxp_v4l2_out {
- compatible = "fsl,imx6sl-pxp-v4l2";
- status = "okay";
+ reg_usb_otg1_vbus: regulator-otg1-vbus {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb_otg1_vbus>;
+ regulator-name = "usb_otg1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio4 0 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
};
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
+ reg_usb_otg2_vbus: regulator-otg2-vbus {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb_otg2_vbus>;
+ regulator-name = "usb_otg2_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio4 2 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
- reg_usb_otg1_vbus: regulator@0 {
- compatible = "regulator-fixed";
- reg = <0>;
- regulator-name = "usb_otg1_vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&gpio4 0 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
+ reg_aud3v: regulator-aud3v {
+ compatible = "regulator-fixed";
+ regulator-name = "wm8962-supply-3v15";
+ regulator-min-microvolt = <3150000>;
+ regulator-max-microvolt = <3150000>;
+ regulator-boot-on;
+ };
- reg_usb_otg2_vbus: regulator@1 {
- compatible = "regulator-fixed";
- reg = <1>;
- regulator-name = "usb_otg2_vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&gpio4 2 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
+ reg_aud4v: regulator-aud4v {
+ compatible = "regulator-fixed";
+ regulator-name = "wm8962-supply-4v2";
+ regulator-min-microvolt = <4325000>;
+ regulator-max-microvolt = <4325000>;
+ regulator-boot-on;
+ };
- reg_aud3v: regulator@2 {
- compatible = "regulator-fixed";
- reg = <2>;
- regulator-name = "wm8962-supply-3v15";
- regulator-min-microvolt = <3150000>;
- regulator-max-microvolt = <3150000>;
- regulator-boot-on;
- };
+ reg_lcd_3v3: regulator-lcd-3v3 {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_lcd_3v3>;
+ regulator-name = "lcd-3v3";
+ gpio = <&gpio4 3 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
- reg_aud4v: regulator@3 {
- compatible = "regulator-fixed";
- reg = <3>;
- regulator-name = "wm8962-supply-4v2";
- regulator-min-microvolt = <4325000>;
- regulator-max-microvolt = <4325000>;
- regulator-boot-on;
- };
+ reg_lcd_5v: regulator-lcd-5v {
+ compatible = "regulator-fixed";
+ regulator-name = "lcd-5v0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
- reg_lcd: regulator@4 {
- compatible = "regulator-fixed";
- reg = <4>;
- regulator-name = "lcd-pwr";
- gpio = <&gpio4 8 0>;
- enable-active-high;
- };
+ reg_sd1_vmmc: regulator-sd1-vmmc {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_sd1_vmmc>;
+ regulator-name = "SD1_SPWR";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
- reg_sd1_vmmc: sd1_vmmc {
- compatible = "regulator-fixed";
- regulator-name = "SD1_SPWR";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
+ reg_sd3_vmmc: regulator-sd3-vmmc {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_sd3_vmmc>;
+ regulator-name = "SD3_WIFI";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ gpio = <&gpio4 4 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
- reg_sd2_vmmc: sd2_vmmc {
- compatible = "regulator-fixed";
- regulator-name = "eMMC-VCCQ";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-boot-on;
- };
+ panel {
+ compatible = "sii,43wvf1g";
+ backlight = <&backlight_display>;
+ dvdd-supply = <®_lcd_3v3>;
+ avdd-supply = <®_lcd_5v>;
- reg_sd3_vmmc: sd3_vmmc {
- compatible = "regulator-fixed";
- regulator-name = "SD3_WIFI";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- gpio = <&gpio4 4 GPIO_ACTIVE_HIGH>;
- enable-active-high;
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&display_out>;
+ };
};
-
};
sound {
compatible = "fsl,imx6sl-evk-wm8962", "fsl,imx-audio-wm8962";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hp>;
model = "wm8962-audio";
- cpu-dai = <&ssi2>;
- audio-codec = <&codec>;
+ audio-cpu = <&ssi2>;
+ audio-codec = <&wm8962>;
audio-routing =
"Headphone Jack", "HPOUTL",
"Headphone Jack", "HPOUTR",
"IN3R", "AMIC";
mux-int-port = <2>;
mux-ext-port = <3>;
- codec-master;
- hp-det-gpios = <&gpio4 24 1>;
+ hp-det-gpio = <&gpio4 24 GPIO_ACTIVE_LOW>;
};
};
status = "okay";
};
-&clks {
- assigned-clocks = <&clks IMX6SLL_CLK_PLL4_AUDIO_DIV>;
- assigned-clock-rates = <393216000>;
-};
-
&cpu0 {
arm-supply = <&sw1a_reg>;
soc-supply = <&sw1c_reg>;
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
- pmic: pfuze100@08 {
+ pfuze100: pmic@8 {
compatible = "fsl,pfuze100";
reg = <0x08>;
sw4_reg: sw4 {
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <3300000>;
+ regulator-always-on;
};
swbst_reg: swbst {
};
};
};
-
- max17135: max17135@48 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_max17135>;
- compatible = "maxim,max17135";
- reg = <0x48>;
- status = "okay";
-
- vneg_pwrup = <1>;
- gvee_pwrup = <2>;
- vpos_pwrup = <10>;
- gvdd_pwrup = <12>;
- gvdd_pwrdn = <1>;
- vpos_pwrdn = <2>;
- gvee_pwrdn = <8>;
- vneg_pwrdn = <10>;
- gpio_pmic_pwrgood = <&gpio2 13 0>;
- gpio_pmic_vcom_ctrl = <&gpio2 3 0>;
- gpio_pmic_wakeup = <&gpio2 14 0>;
- gpio_pmic_v3p3 = <&gpio2 7 0>;
- gpio_pmic_intr = <&gpio2 12 0>;
-
- regulators {
- DISPLAY_reg: DISPLAY {
- regulator-name = "DISPLAY";
- };
-
- GVDD_reg: GVDD {
- /* 20v */
- regulator-name = "GVDD";
- };
-
- GVEE_reg: GVEE {
- /* -22v */
- regulator-name = "GVEE";
- };
-
- HVINN_reg: HVINN {
- /* -22v */
- regulator-name = "HVINN";
- };
-
- HVINP_reg: HVINP {
- /* 20v */
- regulator-name = "HVINP";
- };
-
- VCOM_reg: VCOM {
- regulator-name = "VCOM";
- /* 2's-compliment, -4325000 */
- regulator-min-microvolt = <0xffbe0178>;
- /* 2's-compliment, -500000 */
- regulator-max-microvolt = <0xfff85ee0>;
- };
-
- VNEG_reg: VNEG {
- /* -15v */
- regulator-name = "VNEG";
- };
-
- VPOS_reg: VPOS {
- /* 15v */
- regulator-name = "VPOS";
- };
-
- V3P3_reg: V3P3 {
- regulator-name = "V3P3";
- };
- };
- };
};
&i2c3 {
pinctrl-0 = <&pinctrl_i2c3>;
status = "okay";
- codec: wm8962@1a {
+ wm8962: audio-codec@1a {
compatible = "wlf,wm8962";
reg = <0x1a>;
clocks = <&clks IMX6SLL_CLK_EXTERN_AUDIO>;
PLLVDD-supply = <&vgen3_reg>;
SPKVDD1-supply = <®_aud4v>;
SPKVDD2-supply = <®_aud4v>;
- amic-mono;
};
};
-&gpc {
- fsl,ldo-bypass = <1>;
-};
-
-&iomuxc {
+&lcdif {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_hog>;
-
- imx6sll-evk {
- pinctrl_hog: hoggrp {
- fsl,pins = <
- MX6SLL_PAD_KEY_ROW7__GPIO4_IO07 0x17059
- MX6SLL_PAD_GPIO4_IO22__GPIO4_IO22 0x17059
- MX6SLL_PAD_KEY_COL3__GPIO3_IO30 0x17059
- /*
- * Must set the LVE of pad SD2_RESET, otherwise current
- * leakage through eMMC chip will pull high the VCCQ to
- * 2.6v, which will impact SD1 and SD3 SD3.0 voltage switch.
- */
- MX6SLL_PAD_SD2_RESET__GPIO4_IO27 0x417059
- MX6SLL_PAD_KEY_COL4__GPIO4_IO00 0x17059
- MX6SLL_PAD_REF_CLK_32K__GPIO3_IO22 0x17059 /* SD3 CD */
- MX6SLL_PAD_KEY_COL6__GPIO4_IO04 0x17059 /*SD3 RESET */
- MX6SLL_PAD_KEY_COL5__GPIO4_IO02 0x17059
- MX6SLL_PAD_GPIO4_IO24__GPIO4_IO24 0x17059 /* HP DETECT */
- /* CHG_FLT, CHG_UOK/DOK, CHG_STATUS */
- MX6SLL_PAD_ECSPI2_MISO__GPIO4_IO14 0x17000
- MX6SLL_PAD_ECSPI2_MOSI__GPIO4_IO13 0x17000
- MX6SLL_PAD_ECSPI2_SS0__GPIO4_IO15 0x17000
- >;
- };
-
- pinctrl_audmux3: audmux3grp {
- fsl,pins = <
- MX6SLL_PAD_AUD_TXC__AUD3_TXC 0x4130b0
- MX6SLL_PAD_AUD_TXFS__AUD3_TXFS 0x4130b0
- MX6SLL_PAD_AUD_TXD__AUD3_TXD 0x4110b0
- MX6SLL_PAD_AUD_RXD__AUD3_RXD 0x4130b0
- MX6SLL_PAD_AUD_MCLK__AUDIO_CLK_OUT 0x4130b0
- >;
- };
-
- pinctrl_csi1: csi1grp {
- fsl,pins = <
- MX6SLL_PAD_EPDC_GDRL__CSI_MCLK 0x1b088
- MX6SLL_PAD_EPDC_GDCLK__CSI_PIXCLK 0x1b088
- MX6SLL_PAD_EPDC_GDSP__CSI_VSYNC 0x1b088
- MX6SLL_PAD_EPDC_GDOE__CSI_HSYNC 0x1b088
- MX6SLL_PAD_EPDC_DATA02__CSI_DATA02 0x1b088
- MX6SLL_PAD_EPDC_DATA03__CSI_DATA03 0x1b088
- MX6SLL_PAD_EPDC_DATA04__CSI_DATA04 0x1b088
- MX6SLL_PAD_EPDC_DATA05__CSI_DATA05 0x1b088
- MX6SLL_PAD_EPDC_DATA06__CSI_DATA06 0x1b088
- MX6SLL_PAD_EPDC_DATA07__CSI_DATA07 0x1b088
- MX6SLL_PAD_EPDC_SDCLK__CSI_DATA08 0x1b088
- MX6SLL_PAD_EPDC_SDLE__CSI_DATA09 0x1b088
- MX6SLL_PAD_EPDC_SDSHR__GPIO1_IO26 0x80000000
- MX6SLL_PAD_EPDC_SDOE__GPIO1_IO25 0x80000000
- >;
- };
-
- pinctrl_epdc0: epdcgrp0 {
- fsl,pins = <
- MX6SLL_PAD_EPDC_DATA00__EPDC_DATA00 0x100b1
- MX6SLL_PAD_EPDC_DATA01__EPDC_DATA01 0x100b1
- MX6SLL_PAD_EPDC_DATA02__EPDC_DATA02 0x100b1
- MX6SLL_PAD_EPDC_DATA03__EPDC_DATA03 0x100b1
- MX6SLL_PAD_EPDC_DATA04__EPDC_DATA04 0x100b1
- MX6SLL_PAD_EPDC_DATA05__EPDC_DATA05 0x100b1
- MX6SLL_PAD_EPDC_DATA06__EPDC_DATA06 0x100b1
- MX6SLL_PAD_EPDC_DATA07__EPDC_DATA07 0x100b1
- MX6SLL_PAD_EPDC_DATA08__EPDC_DATA08 0x100b1
- MX6SLL_PAD_EPDC_DATA09__EPDC_DATA09 0x100b1
- MX6SLL_PAD_EPDC_DATA10__EPDC_DATA10 0x100b1
- MX6SLL_PAD_EPDC_DATA11__EPDC_DATA11 0x100b1
- MX6SLL_PAD_EPDC_DATA12__EPDC_DATA12 0x100b1
- MX6SLL_PAD_EPDC_DATA13__EPDC_DATA13 0x100b1
- MX6SLL_PAD_EPDC_DATA14__EPDC_DATA14 0x100b1
- MX6SLL_PAD_EPDC_DATA15__EPDC_DATA15 0x100b1
- MX6SLL_PAD_EPDC_SDCLK__EPDC_SDCLK_P 0x100b1
- MX6SLL_PAD_EPDC_SDLE__EPDC_SDLE 0x100b1
- MX6SLL_PAD_EPDC_SDOE__EPDC_SDOE 0x100b1
- MX6SLL_PAD_EPDC_SDSHR__EPDC_SDSHR 0x100b1
- MX6SLL_PAD_EPDC_SDCE0__EPDC_SDCE0 0x100b1
- MX6SLL_PAD_EPDC_GDCLK__EPDC_GDCLK 0x100b1
- MX6SLL_PAD_EPDC_GDOE__EPDC_GDOE 0x100b1
- MX6SLL_PAD_EPDC_GDRL__EPDC_GDRL 0x100b1
- MX6SLL_PAD_EPDC_GDSP__EPDC_GDSP 0x100b1
- >;
- };
-
- pinctrl_lcdif_dat: lcdifdatgrp {
- fsl,pins = <
- MX6SLL_PAD_LCD_DATA00__LCD_DATA00 0x79
- MX6SLL_PAD_LCD_DATA01__LCD_DATA01 0x79
- MX6SLL_PAD_LCD_DATA02__LCD_DATA02 0x79
- MX6SLL_PAD_LCD_DATA03__LCD_DATA03 0x79
- MX6SLL_PAD_LCD_DATA04__LCD_DATA04 0x79
- MX6SLL_PAD_LCD_DATA05__LCD_DATA05 0x79
- MX6SLL_PAD_LCD_DATA06__LCD_DATA06 0x79
- MX6SLL_PAD_LCD_DATA07__LCD_DATA07 0x79
- MX6SLL_PAD_LCD_DATA08__LCD_DATA08 0x79
- MX6SLL_PAD_LCD_DATA09__LCD_DATA09 0x79
- MX6SLL_PAD_LCD_DATA10__LCD_DATA10 0x79
- MX6SLL_PAD_LCD_DATA11__LCD_DATA11 0x79
- MX6SLL_PAD_LCD_DATA12__LCD_DATA12 0x79
- MX6SLL_PAD_LCD_DATA13__LCD_DATA13 0x79
- MX6SLL_PAD_LCD_DATA14__LCD_DATA14 0x79
- MX6SLL_PAD_LCD_DATA15__LCD_DATA15 0x79
- MX6SLL_PAD_LCD_DATA16__LCD_DATA16 0x79
- MX6SLL_PAD_LCD_DATA17__LCD_DATA17 0x79
- MX6SLL_PAD_LCD_DATA18__LCD_DATA18 0x79
- MX6SLL_PAD_LCD_DATA19__LCD_DATA19 0x79
- MX6SLL_PAD_LCD_DATA20__LCD_DATA20 0x79
- MX6SLL_PAD_LCD_DATA21__LCD_DATA21 0x79
- MX6SLL_PAD_LCD_DATA22__LCD_DATA22 0x79
- MX6SLL_PAD_LCD_DATA23__LCD_DATA23 0x79
- >;
- };
-
- pinctrl_lcdif_ctrl: lcdifctrlgrp {
- fsl,pins = <
- MX6SLL_PAD_LCD_CLK__LCD_CLK 0x79
- MX6SLL_PAD_LCD_ENABLE__LCD_ENABLE 0x79
- MX6SLL_PAD_LCD_HSYNC__LCD_HSYNC 0x79
- MX6SLL_PAD_LCD_VSYNC__LCD_VSYNC 0x79
- MX6SLL_PAD_LCD_RESET__LCD_RESET 0x79
- MX6SLL_PAD_ECSPI1_SCLK__GPIO4_IO08 0x79
- >;
- };
-
- pinctrl_max17135: max17135grp-1 {
- fsl,pins = <
- MX6SLL_PAD_EPDC_PWR_STAT__GPIO2_IO13 0x80000000 /* pwrgood */
- MX6SLL_PAD_EPDC_VCOM0__GPIO2_IO03 0x80000000 /* vcom_ctrl */
- MX6SLL_PAD_EPDC_PWR_WAKE__GPIO2_IO14 0x80000000 /* wakeup */
- MX6SLL_PAD_EPDC_PWR_CTRL0__GPIO2_IO07 0x80000000 /* v3p3 */
- MX6SLL_PAD_EPDC_PWR_IRQ__GPIO2_IO12 0x80000000 /* pwr int */
- >;
- };
-
- pinctrl_spdif: spdifgrp {
- fsl,pins = <
- MX6SLL_PAD_SD2_DATA4__SPDIF_OUT 0x4130b0
- >;
- };
-
- pinctrl_uart1: uart1grp {
- fsl,pins = <
- MX6SLL_PAD_UART1_TXD__UART1_DCE_TX 0x1b0b1
- MX6SLL_PAD_UART1_RXD__UART1_DCE_RX 0x1b0b1
- >;
- };
-
- pinctrl_uart5: uart5grp {
- fsl,pins = <
- MX6SLL_PAD_KEY_ROW1__GPIO3_IO27 0x1b0b1 /* bt reg on */
- MX6SLL_PAD_ECSPI1_MOSI__UART5_DCE_TX 0x1b0b1
- MX6SLL_PAD_ECSPI1_SCLK__UART5_DCE_RX 0x1b0b1
- MX6SLL_PAD_ECSPI1_SS0__UART5_DCE_CTS 0x1b0b1
- MX6SLL_PAD_ECSPI1_MISO__UART5_DCE_RTS 0x1b0b1
- >;
- };
-
- pinctrl_uart5dte: uart5dtegrp {
- fsl,pins = <
- MX6SLL_PAD_ECSPI1_MOSI__UART5_DTE_RX 0x1b0b1
- MX6SLL_PAD_ECSPI1_SCLK__UART5_DTE_TX 0x1b0b1
- MX6SLL_PAD_ECSPI1_SS0__UART5_DTE_RTS 0x1b0b1
- MX6SLL_PAD_ECSPI1_MISO__UART5_DTE_CTS 0x1b0b1
- >;
- };
-
- pinctrl_usdhc1: usdhc1grp {
- fsl,pins = <
- MX6SLL_PAD_SD1_CMD__SD1_CMD 0x17059
- MX6SLL_PAD_SD1_CLK__SD1_CLK 0x13059
- MX6SLL_PAD_SD1_DATA0__SD1_DATA0 0x17059
- MX6SLL_PAD_SD1_DATA1__SD1_DATA1 0x17059
- MX6SLL_PAD_SD1_DATA2__SD1_DATA2 0x17059
- MX6SLL_PAD_SD1_DATA3__SD1_DATA3 0x17059
- >;
- };
-
- pinctrl_usdhc1_100mhz: usdhc1grp_100mhz {
- fsl,pins = <
- MX6SLL_PAD_SD1_CMD__SD1_CMD 0x170b9
- MX6SLL_PAD_SD1_CLK__SD1_CLK 0x130b9
- MX6SLL_PAD_SD1_DATA0__SD1_DATA0 0x170b9
- MX6SLL_PAD_SD1_DATA1__SD1_DATA1 0x170b9
- MX6SLL_PAD_SD1_DATA2__SD1_DATA2 0x170b9
- MX6SLL_PAD_SD1_DATA3__SD1_DATA3 0x170b9
- >;
- };
-
- pinctrl_usdhc1_200mhz: usdhc1grp_200mhz {
- fsl,pins = <
- MX6SLL_PAD_SD1_CMD__SD1_CMD 0x170f9
- MX6SLL_PAD_SD1_CLK__SD1_CLK 0x130f9
- MX6SLL_PAD_SD1_DATA0__SD1_DATA0 0x170f9
- MX6SLL_PAD_SD1_DATA1__SD1_DATA1 0x170f9
- MX6SLL_PAD_SD1_DATA2__SD1_DATA2 0x170f9
- MX6SLL_PAD_SD1_DATA3__SD1_DATA3 0x170f9
- >;
- };
-
- pinctrl_usdhc2: usdhc2grp {
- fsl,pins = <
- MX6SLL_PAD_SD2_CMD__SD2_CMD 0x17059
- MX6SLL_PAD_SD2_CLK__SD2_CLK 0x13059
- MX6SLL_PAD_SD2_DATA0__SD2_DATA0 0x17059
- MX6SLL_PAD_SD2_DATA1__SD2_DATA1 0x17059
- MX6SLL_PAD_SD2_DATA2__SD2_DATA2 0x17059
- MX6SLL_PAD_SD2_DATA3__SD2_DATA3 0x17059
- MX6SLL_PAD_SD2_DATA4__SD2_DATA4 0x17059
- MX6SLL_PAD_SD2_DATA5__SD2_DATA5 0x17059
- MX6SLL_PAD_SD2_DATA6__SD2_DATA6 0x17059
- MX6SLL_PAD_SD2_DATA7__SD2_DATA7 0x17059
- MX6SLL_PAD_GPIO4_IO21__SD2_STROBE 0x413059
- >;
- };
-
- pinctrl_usdhc2_100mhz: usdhc2grp_100mhz {
- fsl,pins = <
- MX6SLL_PAD_SD2_CMD__SD2_CMD 0x170b9
- MX6SLL_PAD_SD2_CLK__SD2_CLK 0x130b9
- MX6SLL_PAD_SD2_DATA0__SD2_DATA0 0x170b9
- MX6SLL_PAD_SD2_DATA1__SD2_DATA1 0x170b9
- MX6SLL_PAD_SD2_DATA2__SD2_DATA2 0x170b9
- MX6SLL_PAD_SD2_DATA3__SD2_DATA3 0x170b9
- MX6SLL_PAD_SD2_DATA4__SD2_DATA4 0x170b9
- MX6SLL_PAD_SD2_DATA5__SD2_DATA5 0x170b9
- MX6SLL_PAD_SD2_DATA6__SD2_DATA6 0x170b9
- MX6SLL_PAD_SD2_DATA7__SD2_DATA7 0x170b9
- MX6SLL_PAD_GPIO4_IO21__SD2_STROBE 0x4130b9
- >;
- };
-
- pinctrl_usdhc2_200mhz: usdhc2grp_200mhz {
- fsl,pins = <
- MX6SLL_PAD_SD2_CMD__SD2_CMD 0x170f9
- MX6SLL_PAD_SD2_CLK__SD2_CLK 0x130f9
- MX6SLL_PAD_SD2_DATA0__SD2_DATA0 0x170f9
- MX6SLL_PAD_SD2_DATA1__SD2_DATA1 0x170f9
- MX6SLL_PAD_SD2_DATA2__SD2_DATA2 0x170f9
- MX6SLL_PAD_SD2_DATA3__SD2_DATA3 0x170f9
- MX6SLL_PAD_SD2_DATA4__SD2_DATA4 0x170f9
- MX6SLL_PAD_SD2_DATA5__SD2_DATA5 0x170f9
- MX6SLL_PAD_SD2_DATA6__SD2_DATA6 0x170f9
- MX6SLL_PAD_SD2_DATA7__SD2_DATA7 0x170f9
- MX6SLL_PAD_GPIO4_IO21__SD2_STROBE 0x4130f9
- >;
- };
-
- pinctrl_usdhc3: usdhc3grp {
- fsl,pins = <
- MX6SLL_PAD_SD3_CMD__SD3_CMD 0x17059
- MX6SLL_PAD_SD3_CLK__SD3_CLK 0x13059
- MX6SLL_PAD_SD3_DATA0__SD3_DATA0 0x17059
- MX6SLL_PAD_SD3_DATA1__SD3_DATA1 0x17059
- MX6SLL_PAD_SD3_DATA2__SD3_DATA2 0x17059
- MX6SLL_PAD_SD3_DATA3__SD3_DATA3 0x17059
- >;
- };
-
- pinctrl_usdhc3_100mhz: usdhc3grp_100mhz {
- fsl,pins = <
- MX6SLL_PAD_SD3_CMD__SD3_CMD 0x170b9
- MX6SLL_PAD_SD3_CLK__SD3_CLK 0x130b9
- MX6SLL_PAD_SD3_DATA0__SD3_DATA0 0x170b9
- MX6SLL_PAD_SD3_DATA1__SD3_DATA1 0x170b9
- MX6SLL_PAD_SD3_DATA2__SD3_DATA2 0x170b9
- MX6SLL_PAD_SD3_DATA3__SD3_DATA3 0x170b9
- >;
- };
-
- pinctrl_usdhc3_200mhz: usdhc3grp_200mhz {
- fsl,pins = <
- MX6SLL_PAD_SD3_CMD__SD3_CMD 0x170f9
- MX6SLL_PAD_SD3_CLK__SD3_CLK 0x130f9
- MX6SLL_PAD_SD3_DATA0__SD3_DATA0 0x170f9
- MX6SLL_PAD_SD3_DATA1__SD3_DATA1 0x170f9
- MX6SLL_PAD_SD3_DATA2__SD3_DATA2 0x170f9
- MX6SLL_PAD_SD3_DATA3__SD3_DATA3 0x170f9
- >;
- };
-
- pinctrl_usbotg1: usbotg1grp {
- fsl,pins = <
- MX6SLL_PAD_EPDC_PWR_COM__USB_OTG1_ID 0x17059
- >;
- };
-
- pinctrl_i2c1: i2c1grp {
- fsl,pins = <
- MX6SLL_PAD_I2C1_SCL__I2C1_SCL 0x4001b8b1
- MX6SLL_PAD_I2C1_SDA__I2C1_SDA 0x4001b8b1
- >;
- };
-
- pinctrl_i2c3: i2c3grp {
- fsl,pins = <
- MX6SLL_PAD_AUD_RXFS__I2C3_SCL 0x4041b8b1
- MX6SLL_PAD_AUD_RXC__I2C3_SDA 0x4041b8b1
- >;
- };
+ pinctrl-0 = <&pinctrl_lcd>;
+ status = "okay";
- pinctrl_pwm1: pmw1grp {
- fsl,pins = <
- MX6SLL_PAD_PWM1__PWM1_OUT 0x110b0
- >;
+ port {
+ display_out: endpoint {
+ remote-endpoint = <&panel_in>;
};
};
};
-&lcdif {
+&pwm1 {
+ #pwm-cells = <2>;
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_lcdif_dat
- &pinctrl_lcdif_ctrl>;
- lcd-supply = <®_lcd>;
- display = <&display>;
+ pinctrl-0 = <&pinctrl_pwm1>;
status = "okay";
+};
- display: display {
- bits-per-pixel = <16>;
- bus-width = <24>;
-
- display-timings {
- native-mode = <&timing0>;
- timing0: timing0 {
- clock-frequency = <33500000>;
- hactive = <800>;
- vactive = <480>;
- hback-porch = <89>;
- hfront-porch = <164>;
- vback-porch = <23>;
- vfront-porch = <10>;
- hsync-len = <10>;
- vsync-len = <10>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <0>;
- };
- };
- };
+&snvs_poweroff {
+ status = "okay";
};
-&pxp {
+&snvs_pwrkey {
status = "okay";
};
-&pwm1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_pwm1>;
+&ssi2 {
status = "okay";
};
status = "okay";
};
-&uart5 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart5>;
- fsl,uart-has-rtscts;
- /* for DTE mode, add below change */
- /* fsl,dte-mode; */
- /* pinctrl-0 = <&pinctrl_uart5dte>; */
- status = "disabled";
-};
-
&usdhc1 {
pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc1>;
cd-gpios = <&gpio4 7 GPIO_ACTIVE_LOW>;
wp-gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>;
keep-power-in-suspend;
- enable-sdio-wakeup;
+ wakeup-source;
vmmc-supply = <®_sd1_vmmc>;
status = "okay";
};
-&usdhc2 {
- pinctrl-names = "default", "state_100mhz", "state_200mhz";
- pinctrl-0 = <&pinctrl_usdhc2>;
- pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
- pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
- vqmmc-supply = <®_sd2_vmmc>;
- bus-width = <8>;
- no-removable;
- status = "okay";
-};
-
-&usdhc3 {
- pinctrl-names = "default", "state_100mhz", "state_200mhz";
- pinctrl-0 = <&pinctrl_usdhc3>;
- pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
- pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
- cd-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>;
- keep-power-in-suspend;
- enable-sdio-wakeup;
- vmmc-supply = <®_sd3_vmmc>;
- status = "okay";
-};
-
&usbotg1 {
vbus-supply = <®_usb_otg1_vbus>;
pinctrl-names = "default";
status = "okay";
};
-&epdc {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_epdc0>;
- V3P3-supply = <&V3P3_reg>;
- VCOM-supply = <&VCOM_reg>;
- DISPLAY-supply = <&DISPLAY_reg>;
+&usdhc3 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+ cd-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>;
+ keep-power-in-suspend;
+ wakeup-source;
+ vmmc-supply = <®_sd3_vmmc>;
status = "okay";
};
-&ssi2 {
- status = "okay";
+&wdog1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wdog1>;
+ fsl,ext-reset-output;
+};
+
+&iomuxc {
+ pinctrl_audmux3: audmux3grp {
+ fsl,pins = <
+ MX6SLL_PAD_AUD_TXC__AUD3_TXC 0x4130b0
+ MX6SLL_PAD_AUD_TXFS__AUD3_TXFS 0x4130b0
+ MX6SLL_PAD_AUD_TXD__AUD3_TXD 0x4110b0
+ MX6SLL_PAD_AUD_RXD__AUD3_RXD 0x4130b0
+ MX6SLL_PAD_AUD_MCLK__AUDIO_CLK_OUT 0x4130b0
+ >;
+ };
+
+ pinctrl_hp: hpgrp {
+ fsl,pins = <
+ MX6SLL_PAD_GPIO4_IO24__GPIO4_IO24 0x17059 /* HP DETECT */
+ >;
+ };
+
+ pinctrl_reg_sd3_vmmc: sd3vmmcgrp {
+ fsl,pins = <
+ MX6SLL_PAD_KEY_COL6__GPIO4_IO04 0x17059
+ >;
+ };
+
+ pinctrl_usb_otg1_vbus: vbus1grp {
+ fsl,pins = <
+ MX6SLL_PAD_KEY_COL4__GPIO4_IO00 0x17059
+ >;
+ };
+
+ pinctrl_usb_otg2_vbus: vbus2grp {
+ fsl,pins = <
+ MX6SLL_PAD_KEY_COL5__GPIO4_IO02 0x17059
+ >;
+ };
+
+ pinctrl_reg_lcd_3v3: reglcd3v3grp {
+ fsl,pins = <
+ MX6SLL_PAD_KEY_ROW5__GPIO4_IO03 0x17059
+ >;
+ };
+
+ pinctrl_reg_sd1_vmmc: sd1vmmcgrp {
+ fsl,pins = <
+ MX6SLL_PAD_KEY_COL3__GPIO3_IO30 0x17059
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX6SLL_PAD_UART1_TXD__UART1_DCE_TX 0x1b0b1
+ MX6SLL_PAD_UART1_RXD__UART1_DCE_RX 0x1b0b1
+ >;
+ };
+
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ MX6SLL_PAD_SD1_CMD__SD1_CMD 0x17059
+ MX6SLL_PAD_SD1_CLK__SD1_CLK 0x13059
+ MX6SLL_PAD_SD1_DATA0__SD1_DATA0 0x17059
+ MX6SLL_PAD_SD1_DATA1__SD1_DATA1 0x17059
+ MX6SLL_PAD_SD1_DATA2__SD1_DATA2 0x17059
+ MX6SLL_PAD_SD1_DATA3__SD1_DATA3 0x17059
+ >;
+ };
+
+ pinctrl_usdhc1_100mhz: usdhc1grp_100mhz {
+ fsl,pins = <
+ MX6SLL_PAD_SD1_CMD__SD1_CMD 0x170b9
+ MX6SLL_PAD_SD1_CLK__SD1_CLK 0x130b9
+ MX6SLL_PAD_SD1_DATA0__SD1_DATA0 0x170b9
+ MX6SLL_PAD_SD1_DATA1__SD1_DATA1 0x170b9
+ MX6SLL_PAD_SD1_DATA2__SD1_DATA2 0x170b9
+ MX6SLL_PAD_SD1_DATA3__SD1_DATA3 0x170b9
+ >;
+ };
+
+ pinctrl_usdhc1_200mhz: usdhc1grp_200mhz {
+ fsl,pins = <
+ MX6SLL_PAD_SD1_CMD__SD1_CMD 0x170f9
+ MX6SLL_PAD_SD1_CLK__SD1_CLK 0x130f9
+ MX6SLL_PAD_SD1_DATA0__SD1_DATA0 0x170f9
+ MX6SLL_PAD_SD1_DATA1__SD1_DATA1 0x170f9
+ MX6SLL_PAD_SD1_DATA2__SD1_DATA2 0x170f9
+ MX6SLL_PAD_SD1_DATA3__SD1_DATA3 0x170f9
+ >;
+ };
+
+ pinctrl_usbotg1: usbotg1grp {
+ fsl,pins = <
+ MX6SLL_PAD_EPDC_PWR_COM__USB_OTG1_ID 0x17059
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX6SLL_PAD_SD3_CMD__SD3_CMD 0x17061
+ MX6SLL_PAD_SD3_CLK__SD3_CLK 0x13061
+ MX6SLL_PAD_SD3_DATA0__SD3_DATA0 0x17061
+ MX6SLL_PAD_SD3_DATA1__SD3_DATA1 0x17061
+ MX6SLL_PAD_SD3_DATA2__SD3_DATA2 0x17061
+ MX6SLL_PAD_SD3_DATA3__SD3_DATA3 0x17061
+ MX6SLL_PAD_REF_CLK_32K__GPIO3_IO22 0x17059
+ >;
+ };
+
+ pinctrl_usdhc3_100mhz: usdhc3grp_100mhz {
+ fsl,pins = <
+ MX6SLL_PAD_SD3_CMD__SD3_CMD 0x170a1
+ MX6SLL_PAD_SD3_CLK__SD3_CLK 0x130a1
+ MX6SLL_PAD_SD3_DATA0__SD3_DATA0 0x170a1
+ MX6SLL_PAD_SD3_DATA1__SD3_DATA1 0x170a1
+ MX6SLL_PAD_SD3_DATA2__SD3_DATA2 0x170a1
+ MX6SLL_PAD_SD3_DATA3__SD3_DATA3 0x170a1
+ MX6SLL_PAD_REF_CLK_32K__GPIO3_IO22 0x17059
+ >;
+ };
+
+ pinctrl_usdhc3_200mhz: usdhc3grp_200mhz {
+ fsl,pins = <
+ MX6SLL_PAD_SD3_CMD__SD3_CMD 0x170e9
+ MX6SLL_PAD_SD3_CLK__SD3_CLK 0x130f9
+ MX6SLL_PAD_SD3_DATA0__SD3_DATA0 0x170e9
+ MX6SLL_PAD_SD3_DATA1__SD3_DATA1 0x170e9
+ MX6SLL_PAD_SD3_DATA2__SD3_DATA2 0x170e9
+ MX6SLL_PAD_SD3_DATA3__SD3_DATA3 0x170e9
+ MX6SLL_PAD_REF_CLK_32K__GPIO3_IO22 0x17059
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX6SLL_PAD_I2C1_SCL__I2C1_SCL 0x4001b8b1
+ MX6SLL_PAD_I2C1_SDA__I2C1_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX6SLL_PAD_AUD_RXFS__I2C3_SCL 0x4041b8b1
+ MX6SLL_PAD_AUD_RXC__I2C3_SDA 0x4041b8b1
+ >;
+ };
+
+ pinctrl_lcd: lcdgrp {
+ fsl,pins = <
+ MX6SLL_PAD_LCD_DATA00__LCD_DATA00 0x79
+ MX6SLL_PAD_LCD_DATA01__LCD_DATA01 0x79
+ MX6SLL_PAD_LCD_DATA02__LCD_DATA02 0x79
+ MX6SLL_PAD_LCD_DATA03__LCD_DATA03 0x79
+ MX6SLL_PAD_LCD_DATA04__LCD_DATA04 0x79
+ MX6SLL_PAD_LCD_DATA05__LCD_DATA05 0x79
+ MX6SLL_PAD_LCD_DATA06__LCD_DATA06 0x79
+ MX6SLL_PAD_LCD_DATA07__LCD_DATA07 0x79
+ MX6SLL_PAD_LCD_DATA08__LCD_DATA08 0x79
+ MX6SLL_PAD_LCD_DATA09__LCD_DATA09 0x79
+ MX6SLL_PAD_LCD_DATA10__LCD_DATA10 0x79
+ MX6SLL_PAD_LCD_DATA11__LCD_DATA11 0x79
+ MX6SLL_PAD_LCD_DATA12__LCD_DATA12 0x79
+ MX6SLL_PAD_LCD_DATA13__LCD_DATA13 0x79
+ MX6SLL_PAD_LCD_DATA14__LCD_DATA14 0x79
+ MX6SLL_PAD_LCD_DATA15__LCD_DATA15 0x79
+ MX6SLL_PAD_LCD_DATA16__LCD_DATA16 0x79
+ MX6SLL_PAD_LCD_DATA17__LCD_DATA17 0x79
+ MX6SLL_PAD_LCD_DATA18__LCD_DATA18 0x79
+ MX6SLL_PAD_LCD_DATA19__LCD_DATA19 0x79
+ MX6SLL_PAD_LCD_DATA20__LCD_DATA20 0x79
+ MX6SLL_PAD_LCD_DATA21__LCD_DATA21 0x79
+ MX6SLL_PAD_LCD_DATA22__LCD_DATA22 0x79
+ MX6SLL_PAD_LCD_DATA23__LCD_DATA23 0x79
+ MX6SLL_PAD_LCD_CLK__LCD_CLK 0x79
+ MX6SLL_PAD_LCD_ENABLE__LCD_ENABLE 0x79
+ MX6SLL_PAD_LCD_HSYNC__LCD_HSYNC 0x79
+ MX6SLL_PAD_LCD_VSYNC__LCD_VSYNC 0x79
+ MX6SLL_PAD_LCD_RESET__LCD_RESET 0x79
+ >;
+ };
+
+ pinctrl_led: ledgrp {
+ fsl,pins = <
+ MX6SLL_PAD_EPDC_VCOM1__GPIO2_IO04 0x17059
+ >;
+ };
+
+ pinctrl_pwm1: pmw1grp {
+ fsl,pins = <
+ MX6SLL_PAD_PWM1__PWM1_OUT 0x110b0
+ >;
+ };
+
+ pinctrl_wdog1: wdog1grp {
+ fsl,pins = <
+ MX6SLL_PAD_WDOG_B__WDOG1_B 0x170b0
+ >;
+ };
};
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
/*
* Copyright 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017-2018 NXP.
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
*/
#include <dt-bindings/clock/imx6sll-clock.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include "imx6sll-pinfunc.h"
-#include "skeleton.dtsi"
/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
aliases {
gpio0 = &gpio1;
gpio1 = &gpio2;
spi1 = &ecspi2;
spi3 = &ecspi3;
spi4 = &ecspi4;
+ usb0 = &usbotg1;
+ usb1 = &usbotg2;
usbphy0 = &usbphy1;
usbphy1 = &usbphy2;
};
device_type = "cpu";
reg = <0>;
next-level-cache = <&L2>;
- operating-points = <
+ operating-points =
/* kHz uV */
- 996000 1225000
- 792000 1175000
- 396000 1075000
- 198000 975000
- >;
- fsl,soc-operating-points = <
+ <996000 1275000>,
+ <792000 1175000>,
+ <396000 1075000>,
+ <198000 975000>;
+ fsl,soc-operating-points =
/* ARM kHz SOC-PU uV */
- 996000 1225000
- 792000 1175000
- 396000 1175000
- 198000 1175000
- >;
+ <996000 1175000>,
+ <792000 1175000>,
+ <396000 1175000>,
+ <198000 1175000>;
clock-latency = <61036>; /* two CLK32 periods */
- fsl,low-power-run;
+ #cooling-cells = <2>;
clocks = <&clks IMX6SLL_CLK_ARM>,
<&clks IMX6SLL_CLK_PLL2_PFD2>,
<&clks IMX6SLL_CLK_STEP>,
<&clks IMX6SLL_CLK_PLL1_SW>,
- <&clks IMX6SLL_CLK_PLL1_SYS>,
- <&clks IMX6SLL_CLK_PLL1>,
- <&clks IMX6SLL_PLL1_BYPASS>,
- <&clks IMX6SLL_PLL1_BYPASS_SRC>;
+ <&clks IMX6SLL_CLK_PLL1_SYS>;
clock-names = "arm", "pll2_pfd2_396m", "step",
- "pll1_sw", "pll1_sys", "pll1", "pll1_bypass",
- "pll1_bypass_src";
+ "pll1_sw", "pll1_sys";
+ nvmem-cells = <&cpu_speed_grade>;
+ nvmem-cell-names = "speed_grade";
};
};
- intc: interrupt-controller@00a01000 {
- compatible = "arm,cortex-a9-gic";
- #interrupt-cells = <3>;
- interrupt-controller;
- reg = <0x00a01000 0x1000>,
- <0x00a00100 0x100>;
- interrupt-parent = <&intc>;
+ ckil: clock-ckil {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ clock-output-names = "ckil";
};
- clocks {
- #address-cells = <1>;
- #size-cells = <0>;
-
- ckil: clock@0 {
- compatible = "fixed-clock";
- reg = <0>;
- #clock-cells = <0>;
- clock-frequency = <32768>;
- clock-output-names = "ckil";
- };
-
- osc: clock@1 {
- compatible = "fixed-clock";
- reg = <1>;
- #clock-cells = <0>;
- clock-frequency = <24000000>;
- clock-output-names = "osc";
- };
+ osc: clock-osc-24m {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24000000>;
+ clock-output-names = "osc";
+ };
- ipp_di0: clock@2 {
- compatible = "fixed-clock";
- reg = <2>;
- #clock-cells = <0>;
- clock-frequency = <0>;
- clock-output-names = "ipp_di0";
- };
+ ipp_di0: clock-ipp-di0 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ clock-output-names = "ipp_di0";
+ };
- ipp_di1: clock@3 {
- compatible = "fixed-clock";
- reg = <3>;
- #clock-cells = <0>;
- clock-frequency = <0>;
- clock-output-names = "ipp_di1";
- };
+ ipp_di1: clock-ipp-di1 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ clock-output-names = "ipp_di1";
};
soc {
interrupt-parent = <&gpc>;
ranges;
- busfreq {
- compatible = "fsl,imx_busfreq";
- clocks = <&clks IMX6SLL_CLK_PLL2_PFD2>, <&clks IMX6SLL_CLK_PLL2_198M>,
- <&clks IMX6SLL_CLK_PLL2_BUS>, <&clks IMX6SLL_CLK_ARM>,
- <&clks IMX6SLL_CLK_PLL3_USB_OTG>, <&clks IMX6SLL_CLK_PERIPH>,
- <&clks IMX6SLL_CLK_PERIPH_PRE>, <&clks IMX6SLL_CLK_PERIPH_CLK2>,
- <&clks IMX6SLL_CLK_PERIPH_CLK2_SEL>, <&clks IMX6SLL_CLK_OSC>,
- <&clks IMX6SLL_CLK_AHB>, <&clks IMX6SLL_CLK_AXI_PODF>,
- <&clks IMX6SLL_CLK_PERIPH2>, <&clks IMX6SLL_CLK_PERIPH2_PRE>,
- <&clks IMX6SLL_CLK_PERIPH2_CLK2>, <&clks IMX6SLL_CLK_PERIPH2_CLK2_SEL>,
- <&clks IMX6SLL_CLK_STEP>, <&clks IMX6SLL_CLK_MMDC_P0_FAST>, <&clks IMX6SLL_PLL1_BYPASS_SRC>,
- <&clks IMX6SLL_PLL1_BYPASS>, <&clks IMX6SLL_CLK_PLL1_SYS>, <&clks IMX6SLL_CLK_PLL1_SW>,
- <&clks IMX6SLL_CLK_PLL1>;
- clock-names = "pll2_pfd2_396m", "pll2_198m", "pll2_bus", "arm", "pll3_usb_otg",
- "periph", "periph_pre", "periph_clk2", "periph_clk2_sel", "osc",
- "ahb", "ocram", "periph2", "periph2_pre", "periph2_clk2", "periph2_clk2_sel",
- "step", "mmdc", "pll1_bypass_src", "pll1_bypass", "pll1_sys", "pll1_sw", "pll1";
- fsl,max_ddr_freq = <400000000>;
- };
-
- ocrams: sram@00900000 {
- compatible = "fsl,lpm-sram";
- reg = <0x00900000 0x4000>;
+ ocram: sram@900000 {
+ compatible = "mmio-sram";
+ reg = <0x00900000 0x20000>;
};
- ocrams_ddr: sram@00904000 {
- compatible = "fsl,ddr-lpm-sram";
- reg = <0x00904000 0x1000>;
+ intc: interrupt-controller@a01000 {
+ compatible = "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0x00a01000 0x1000>,
+ <0x00a00100 0x100>;
+ interrupt-parent = <&intc>;
};
- ocram: sram@00905000 {
- compatible = "mmio-sram";
- reg = <0x00905000 0x1B000>;
- };
-
- L2: l2-cache@00a02000 {
+ L2: cache-controller@a02000 {
compatible = "arm,pl310-cache";
reg = <0x00a02000 0x1000>;
interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
arm,data-latency = <4 2 3>;
};
- aips1: bus@02000000 {
+ aips1: bus@2000000 {
compatible = "fsl,aips-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x02000000 0x100000>;
ranges;
- spba: spba-bus@02000000 {
+ spba: spba-bus@2000000 {
compatible = "fsl,spba-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x02000000 0x40000>;
ranges;
- spdif: spdif@02004000 {
+ spdif: spdif@2004000 {
compatible = "fsl,imx6sl-spdif", "fsl,imx35-spdif";
reg = <0x02004000 0x4000>;
interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
- ecspi1: ecspi@02008000 {
+ ecspi1: spi@2008000 {
compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
reg = <0x02008000 0x4000>;
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
- ecspi2: ecspi@0200c000 {
+ ecspi2: spi@200c000 {
compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
reg = <0x0200c000 0x4000>;
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
- ecspi3: ecspi@02010000 {
+ ecspi3: spi@2010000 {
compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
reg = <0x02010000 0x4000>;
interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
- ecspi4: ecspi@02014000 {
+ ecspi4: spi@2014000 {
compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
reg = <0x02014000 0x4000>;
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
- uart4: serial@02018000 {
- compatible = "fsl,imx6sll-uart", "fsl,imx6q-uart", "fsl,imx21-uart";
+ uart4: serial@2018000 {
+ compatible = "fsl,imx6sl-uart", "fsl,imx6q-uart",
+ "fsl,imx21-uart";
reg = <0x02018000 0x4000>;
- interrupts =<GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&sdma 31 4 0>, <&sdma 32 4 0>;
dma-names = "rx", "tx";
clocks = <&clks IMX6SLL_CLK_UART4_IPG>,
status = "disabled";
};
- uart1: serial@02020000 {
- compatible = "fsl,imx6sll-uart", "fsl,imx6q-uart", "fsl,imx21-uart";
+ uart1: serial@2020000 {
+ compatible = "fsl,imx6sl-uart", "fsl,imx6q-uart",
+ "fsl,imx21-uart";
reg = <0x02020000 0x4000>;
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&sdma 25 4 0>, <&sdma 26 4 0>;
status = "disabled";
};
- uart2: serial@02024000 {
- compatible = "fsl,imx6sll-uart", "fsl,imx6q-uart", "fsl,imx21-uart";
+ uart2: serial@2024000 {
+ compatible = "fsl,imx6sl-uart", "fsl,imx6q-uart",
+ "fsl,imx21-uart";
reg = <0x02024000 0x4000>;
interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&sdma 27 4 0>, <&sdma 28 4 0>;
status = "disabled";
};
- ssi1: ssi@02028000 {
- compatible = "fsl,imx6sll-ssi", "fsl,imx51-ssi";
+ ssi1: ssi@2028000 {
+ compatible = "fsl,imx6sl-ssi", "fsl,imx51-ssi";
reg = <0x02028000 0x4000>;
interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&sdma 37 22 0>, <&sdma 38 22 0>;
status = "disabled";
};
- ssi2: ssi2@0202c000 {
- compatible = "fsl,imx6sll-ssi", "fsl,imx51-ssi";
+ ssi2: ssi@202c000 {
+ compatible = "fsl,imx6sl-ssi", "fsl,imx51-ssi";
reg = <0x0202c000 0x4000>;
interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&sdma 41 22 0>, <&sdma 42 22 0>;
status = "disabled";
};
- ssi3: ssi@02030000 {
- compatible = "fsl,imx6sll-ssi", "fsl,imx51-ssi";
+ ssi3: ssi@2030000 {
+ compatible = "fsl,imx6sl-ssi", "fsl,imx51-ssi";
reg = <0x02030000 0x4000>;
interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&sdma 45 22 0>, <&sdma 46 22 0>;
status = "disabled";
};
- uart3: serial@02034000 {
- compatible = "fsl,imx6sll-uart", "fsl,imx6q-uart", "fsl,imx21-uart";
+ uart3: serial@2034000 {
+ compatible = "fsl,imx6sl-uart", "fsl,imx6q-uart",
+ "fsl,imx21-uart";
reg = <0x02034000 0x4000>;
interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&sdma 29 4 0>, <&sdma 30 4 0>;
};
};
- pwm1: pwm@02080000 {
+ pwm1: pwm@2080000 {
compatible = "fsl,imx6sll-pwm", "fsl,imx27-pwm";
reg = <0x02080000 0x4000>;
interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SLL_CLK_PWM1>,
<&clks IMX6SLL_CLK_PWM1>;
clock-names = "ipg", "per";
- #pwm-cells = <2>;
+ #pwm-cells = <3>;
};
- pwm2: pwm@02084000 {
+ pwm2: pwm@2084000 {
compatible = "fsl,imx6sll-pwm", "fsl,imx27-pwm";
reg = <0x02084000 0x4000>;
interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SLL_CLK_PWM2>,
<&clks IMX6SLL_CLK_PWM2>;
clock-names = "ipg", "per";
- #pwm-cells = <2>;
+ #pwm-cells = <3>;
};
- pwm3: pwm@02088000 {
+ pwm3: pwm@2088000 {
compatible = "fsl,imx6sll-pwm", "fsl,imx27-pwm";
reg = <0x02088000 0x4000>;
interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SLL_CLK_PWM3>,
<&clks IMX6SLL_CLK_PWM3>;
clock-names = "ipg", "per";
- #pwm-cells = <2>;
+ #pwm-cells = <3>;
};
- pwm4: pwm@0208c000 {
+ pwm4: pwm@208c000 {
compatible = "fsl,imx6sll-pwm", "fsl,imx27-pwm";
reg = <0x0208c000 0x4000>;
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SLL_CLK_PWM4>,
<&clks IMX6SLL_CLK_PWM4>;
clock-names = "ipg", "per";
- #pwm-cells = <2>;
+ #pwm-cells = <3>;
};
- gpt1: gpt@02098000 {
- compatible = "fsl,imx6sll-gpt";
+ gpt1: timer@2098000 {
+ compatible = "fsl,imx6sl-gpt";
reg = <0x02098000 0x4000>;
interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SLL_CLK_GPT_BUS>,
clock-names = "ipg", "per";
};
- gpio1: gpio@0209c000 {
+ gpio1: gpio@209c000 {
compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio";
reg = <0x0209c000 0x4000>;
interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SLL_CLK_GPIO1>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
+ gpio-ranges = <&iomuxc 0 94 7>, <&iomuxc 7 25 25>;
};
- gpio2: gpio@020a0000 {
+ gpio2: gpio@20a0000 {
compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio";
reg = <0x020a0000 0x4000>;
interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SLL_CLK_GPIO2>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
+ gpio-ranges = <&iomuxc 0 50 32>;
};
- gpio3: gpio@020a4000 {
+ gpio3: gpio@20a4000 {
compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio";
reg = <0x020a4000 0x4000>;
interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SLL_CLK_GPIO3>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
+ gpio-ranges = <&iomuxc 0 82 12>, <&iomuxc 12 103 4>,
+ <&iomuxc 16 101 2>, <&iomuxc 18 5 1>,
+ <&iomuxc 21 6 11>;
};
- gpio4: gpio@020a8000 {
+ gpio4: gpio@20a8000 {
compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio";
reg = <0x020a8000 0x4000>;
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SLL_CLK_GPIO4>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
- };
-
- gpio5: gpio@020ac000 {
+ gpio-ranges = <&iomuxc 0 17 8>, <&iomuxc 8 107 8>,
+ <&iomuxc 16 151 1>, <&iomuxc 17 149 1>,
+ <&iomuxc 18 146 1>, <&iomuxc 19 144 1>,
+ <&iomuxc 20 142 1>, <&iomuxc 21 143 1>,
+ <&iomuxc 22 150 1>, <&iomuxc 23 148 1>,
+ <&iomuxc 24 147 1>, <&iomuxc 25 145 1>,
+ <&iomuxc 26 152 1>, <&iomuxc 27 125 1>,
+ <&iomuxc 28 131 1>, <&iomuxc 29 134 1>,
+ <&iomuxc 30 129 1>, <&iomuxc 31 133 1>;
+ };
+
+ gpio5: gpio@20ac000 {
compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio";
reg = <0x020ac000 0x4000>;
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SLL_CLK_GPIO5>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
- };
-
- gpio6: gpio@020b0000 {
+ gpio-ranges = <&iomuxc 0 135 1>, <&iomuxc 1 128 1>,
+ <&iomuxc 2 132 1>, <&iomuxc 3 130 1>,
+ <&iomuxc 4 127 1>, <&iomuxc 5 126 1>,
+ <&iomuxc 6 120 1>, <&iomuxc 7 123 1>,
+ <&iomuxc 8 118 1>, <&iomuxc 9 122 1>,
+ <&iomuxc 10 124 1>, <&iomuxc 11 117 1>,
+ <&iomuxc 12 121 1>, <&iomuxc 13 119 1>,
+ <&iomuxc 14 116 1>, <&iomuxc 15 115 1>,
+ <&iomuxc 16 140 2>, <&iomuxc 18 136 1>,
+ <&iomuxc 19 138 1>, <&iomuxc 20 139 1>,
+ <&iomuxc 21 137 1>;
+ };
+
+ gpio6: gpio@20b0000 {
compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio";
reg = <0x020b0000 0x4000>;
interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SLL_CLK_GPIO6>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
- kpp: kpp@020b8000 {
+ kpp: keypad@20b8000 {
compatible = "fsl,imx6sll-kpp", "fsl,imx21-kpp";
reg = <0x020b8000 0x4000>;
interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
- wdog1: wdog@020bc000 {
+ wdog1: watchdog@20bc000 {
compatible = "fsl,imx6sll-wdt", "fsl,imx21-wdt";
reg = <0x020bc000 0x4000>;
interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SLL_CLK_WDOG1>;
};
- wdog2: wdog@020c0000 {
+ wdog2: watchdog@20c0000 {
compatible = "fsl,imx6sll-wdt", "fsl,imx21-wdt";
reg = <0x020c0000 0x4000>;
interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
- clks: ccm@020c4000 {
+ clks: clock-controller@20c4000 {
compatible = "fsl,imx6sll-ccm";
reg = <0x020c4000 0x4000>;
interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
#clock-cells = <1>;
clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>;
clock-names = "ckil", "osc", "ipp_di0", "ipp_di1";
+
+ assigned-clocks = <&clks IMX6SLL_CLK_PERCLK_SEL>;
+ assigned-clock-parents = <&clks IMX6SLL_CLK_OSC>;
};
- anatop: anatop@020c8000 {
+ anatop: anatop@20c8000 {
compatible = "fsl,imx6sll-anatop",
"fsl,imx6q-anatop",
- "syscon", "simple-bus";
+ "syscon", "simple-mfd";
reg = <0x020c8000 0x4000>;
interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
- reg_3p0: regulator-3p0@120 {
+ reg_3p0: regulator-3p0@20c8120 {
compatible = "fsl,anatop-regulator";
+ reg = <0x20c8120>;
regulator-name = "vdd3p0";
regulator-min-microvolt = <2625000>;
regulator-max-microvolt = <3400000>;
anatop-max-voltage = <3400000>;
anatop-enable-bit = <0>;
};
- };
- tempmon: tempmon {
- compatible = "fsl,imx6sll-tempmon", "fsl,imx6sx-tempmon";
- interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
- fsl,tempmon = <&anatop>;
- fsl,tempmon-data = <&ocotp>;
- clocks = <&clks IMX6SLL_CLK_PLL3_USB_OTG>;
- status = "disabled";
+ tempmon: temperature-sensor {
+ compatible = "fsl,imx6sll-tempmon", "fsl,imx6sx-tempmon";
+ interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&gpc>;
+ fsl,tempmon = <&anatop>;
+ nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>;
+ nvmem-cell-names = "calib", "temp_grade";
+ clocks = <&clks IMX6SLL_CLK_PLL3_USB_OTG>;
+ };
};
- usbphy1: usbphy@020c9000 {
+ usbphy1: usb-phy@20c9000 {
compatible = "fsl,imx6sll-usbphy", "fsl,imx6ul-usbphy",
"fsl,imx23-usbphy";
reg = <0x020c9000 0x1000>;
fsl,anatop = <&anatop>;
};
- usbphy2: usbphy@020ca000 {
+ usbphy2: usb-phy@20ca000 {
compatible = "fsl,imx6sll-usbphy", "fsl,imx6ul-usbphy",
"fsl,imx23-usbphy";
reg = <0x020ca000 0x1000>;
fsl,anatop = <&anatop>;
};
- snvs: snvs@020cc000 {
+ snvs: snvs@20cc000 {
compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
reg = <0x020cc000 0x4000>;
compatible = "fsl,sec-v4.0-mon-rtc-lp";
regmap = <&snvs>;
offset = <0x34>;
- interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
};
snvs_poweroff: snvs-poweroff {
regmap = <&snvs>;
offset = <0x38>;
mask = <0x61>;
+ status = "disabled";
};
snvs_pwrkey: snvs-powerkey {
regmap = <&snvs>;
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
linux,keycode = <KEY_POWER>;
- wakeup;
+ wakeup-source;
+ status = "disabled";
};
};
- epit1: epit@020d0000 {
- reg = <0x020d0000 0x4000>;
- interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- epit2: epit@020d4000 {
- reg = <0x020d4000 0x4000>;
- interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- src: src@020d8000 {
+ src: reset-controller@20d8000 {
compatible = "fsl,imx6sll-src", "fsl,imx51-src";
reg = <0x020d8000 0x4000>;
interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
#reset-cells = <1>;
};
- gpc: gpc@020dc000 {
+ gpc: interrupt-controller@20dc000 {
compatible = "fsl,imx6sll-gpc", "fsl,imx6q-gpc";
reg = <0x020dc000 0x4000>;
interrupt-controller;
#interrupt-cells = <3>;
interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
interrupt-parent = <&intc>;
- fsl,mf-mix-wakeup-irq = <0x7c00000 0x7d00 0x0 0x1400640>;
};
- iomuxc: iomuxc@020e0000 {
+ iomuxc: pinctrl@20e0000 {
compatible = "fsl,imx6sll-iomuxc";
reg = <0x020e0000 0x4000>;
};
- gpr: iomuxc-gpr@020e4000 {
+ gpr: iomuxc-gpr@20e4000 {
compatible = "fsl,imx6sll-iomuxc-gpr",
"fsl,imx6q-iomuxc-gpr", "syscon";
reg = <0x020e4000 0x4000>;
};
- csi: csi@020e8000 {
+ csi: csi@20e8000 {
compatible = "fsl,imx6sll-csi", "fsl,imx6s-csi";
reg = <0x020e8000 0x4000>;
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
- sdma: sdma@020ec000 {
- compatible = "fsl,imx6sll-sdma", "fsl,imx35-sdma";
+ sdma: dma-controller@20ec000 {
+ compatible = "fsl,imx6sll-sdma", "fsl,imx6ul-sdma";
reg = <0x020ec000 0x4000>;
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6SLL_CLK_SDMA>,
+ clocks = <&clks IMX6SLL_CLK_IPG>,
<&clks IMX6SLL_CLK_SDMA>;
clock-names = "ipg", "ahb";
#dma-cells = <3>;
fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin";
};
- pxp: pxp@020f0000 {
- compatible = "fsl,imx6ull-pxp-dma", "fsl,imx7d-pxp-dma";
- reg = <0x020f0000 0x4000>;
+ pxp: pxp@20f0000 {
+ compatible = "fsl,imx6sll-pxp", "fsl,imx6ull-pxp";
+ reg = <0x20f0000 0x4000>;
interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6SLL_CLK_DUMMY>,
- <&clks IMX6SLL_CLK_PXP>;
- clock-names = "pxp_ipg", "pxp_axi";
- status = "disabled";
- };
-
- epdc: epdc@020f4000 {
- compatible = "fsl,imx6sll-epdc", "fsl,imx7d-epdc";
- reg = <0x020f4000 0x4000>;
- interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6SLL_CLK_EPDC_AXI>, <&clks IMX6SLL_CLK_EPDC_PIX>;
- clock-names = "epdc_axi", "epdc_pix";
- status = "disabled";
+ clocks = <&clks IMX6SLL_CLK_PXP>;
+ clock-names = "axi";
};
- lcdif: lcdif@020f8000 {
+ lcdif: lcd-controller@20f8000 {
compatible = "fsl,imx6sll-lcdif", "fsl,imx28-lcdif";
reg = <0x020f8000 0x4000>;
interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
- dcp: dcp@020fc000 {
- compatible = "fsl,imx6sl-dcp";
+ dcp: crypto@20fc000 {
+ compatible = "fsl,imx28-dcp";
reg = <0x020fc000 0x4000>;
interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
};
};
- aips2: bus@02100000 {
+ aips2: bus@2100000 {
compatible = "fsl,aips-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x02100000 0x100000>;
ranges;
- usbotg1: usb@02184000 {
+ usbotg1: usb@2184000 {
compatible = "fsl,imx6sll-usb", "fsl,imx6ul-usb",
"fsl,imx27-usb";
reg = <0x02184000 0x200>;
status = "disabled";
};
- usbotg2: usb@02184200 {
+ usbotg2: usb@2184200 {
compatible = "fsl,imx6sll-usb", "fsl,imx6ul-usb",
"fsl,imx27-usb";
reg = <0x02184200 0x200>;
status = "disabled";
};
- usbmisc: usbmisc@02184800 {
+ usbmisc: usbmisc@2184800 {
#index-cells = <1>;
compatible = "fsl,imx6sll-usbmisc", "fsl,imx6ul-usbmisc",
"fsl,imx6q-usbmisc";
reg = <0x02184800 0x200>;
};
- usdhc1: usdhc@02190000 {
+ usdhc1: mmc@2190000 {
compatible = "fsl,imx6sll-usdhc", "fsl,imx6sx-usdhc";
reg = <0x02190000 0x4000>;
interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
- usdhc2: usdhc@02194000 {
+ usdhc2: mmc@2194000 {
compatible = "fsl,imx6sll-usdhc", "fsl,imx6sx-usdhc";
reg = <0x02194000 0x4000>;
interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
- usdhc3: usdhc@02198000 {
+ usdhc3: mmc@2198000 {
compatible = "fsl,imx6sll-usdhc", "fsl,imx6sx-usdhc";
reg = <0x02198000 0x4000>;
interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
- i2c1: i2c@021a0000 {
+ i2c1: i2c@21a0000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "fs,imx6sll-i2c", "fsl,imx21-i2c";
+ compatible = "fsl,imx6sll-i2c", "fsl,imx21-i2c";
reg = <0x021a0000 0x4000>;
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SLL_CLK_I2C1>;
status = "disabled";
};
- i2c2: i2c@021a4000 {
+ i2c2: i2c@21a4000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6sll-i2c", "fsl,imx21-i2c";
status = "disabled";
};
- i2c3: i2c@021a8000 {
+ i2c3: i2c@21a8000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6sll-i2c", "fsl,imx21-i2c";
status = "disabled";
};
- romcp@021ac000 {
- compatible = "fsl,imx6sll-romcp", "syscon";
- reg = <0x021ac000 0x4000>;
- };
-
- mmdc: mmdc@021b0000 {
+ mmdc: memory-controller@21b0000 {
compatible = "fsl,imx6sll-mmdc", "fsl,imx6q-mmdc";
reg = <0x021b0000 0x4000>;
+ clocks = <&clks IMX6SLL_CLK_MMDC_P0_IPG>;
};
- rngb: rngb@021b4000 {
- compatible = "fsl,imx6sl-rng", "fsl,imx-rng", "imx-rng";
+ rngb: rng@21b4000 {
+ compatible = "fsl,imx6sll-rngb", "fsl,imx25-rngb";
reg = <0x021b4000 0x4000>;
interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6SLL_CLK_DUMMY>;
+ clocks = <&clks IMX6SLL_CLK_DUMMY>;
};
- ocotp: ocotp-ctrl@021bc000 {
+ ocotp: efuse@21bc000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
compatible = "fsl,imx6sll-ocotp", "syscon";
reg = <0x021bc000 0x4000>;
clocks = <&clks IMX6SLL_CLK_OCOTP>;
- };
- csu: csu@021c0000 {
- compatible = "fsl,imx6sll-csu";
- reg = <0x021c0000 0x4000>;
- interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
- status = "disabled";
- };
+ cpu_speed_grade: speed-grade@10 {
+ reg = <0x10 4>;
+ };
- snvs_gpr: snvs-gpr@0x021c4000 {
- compatible = "fsl, imx6sll-snvs-gpr";
- reg = <0x021c4000 0x10000>;
- };
+ tempmon_calib: calib@38 {
+ reg = <0x38 4>;
+ };
- iomuxc_snvs: iomuxc-snvs@021c8000 {
- compatible = "fsl,imx6sll-iomuxc-snvs";
- reg = <0x021c80000 0x10000>;
+ tempmon_temp_grade: temp-grade@20 {
+ reg = <0x20 4>;
+ };
};
- audmux: audmux@021d8000 {
+ audmux: audmux@21d8000 {
compatible = "fsl,imx6sll-audmux", "fsl,imx31-audmux";
reg = <0x021d8000 0x4000>;
status = "disabled";
};
- uart5: serial@021f4000 {
- compatible = "fsl,imx6sll-uart", "fsl,imx6q-uart", "fsl,imx21-uart";
+ uart5: serial@21f4000 {
+ compatible = "fsl,imx6sll-uart", "fsl,imx6q-uart",
+ "fsl,imx21-uart";
reg = <0x021f4000 0x4000>;
- interrupts =<GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&sdma 33 4 0>, <&sdma 34 4 0>;
dma-names = "rx", "tx";
clocks = <&clks IMX6SLL_CLK_UART5_IPG>,
projects / u-boot.git / commitdiff