mx35pdk: Add support for OTG

Add support for the OTG port on the mx35pdk Personality board.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Tested-by: Stefano Babic <sbabic@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Marek Vasut <marex@denx.de>

diff --git a/board/freescale/mx35pdk/lowlevel_init.S b/board/freescale/mx35pdk/lowlevel_init.S
index 75bb95861968668fde102df20f6a9adfbd6c3716..da8b6f3a4e238b100d9a2418161e5ef18004d26e 100644 (file)
--- a/board/freescale/mx35pdk/lowlevel_init.S
+++ b/board/freescale/mx35pdk/lowlevel_init.S
@@ -94,6 +94,10 @@
        orr r1, r1, #0x00000C00
        orr r1, r1, #0x00000003
        str r1, [r0, #CLKCTL_CGR1]
+
+       ldr r1, [r0, #CLKCTL_CGR2]
+       orr r1, r1, #0x00C00000
+       str r1, [r0, #CLKCTL_CGR2]
 .endm
 
 .macro setup_sdram

diff --git a/board/freescale/mx35pdk/mx35pdk.c b/board/freescale/mx35pdk/mx35pdk.c
index a12531fb892cf5dc7b0fb5e234fec6361f60a3b5..4d8f2f5eea34c1f2c37cd3ab73e62dcabdcf78c2 100644 (file)
--- a/board/freescale/mx35pdk/mx35pdk.c
+++ b/board/freescale/mx35pdk/mx35pdk.c
@@ -98,6 +98,26 @@ static void setup_iomux_spi(void)
        mxc_request_iomux(MX35_PIN_CSPI1_SCLK, MUX_CONFIG_SION);
 }
 
+static void setup_iomux_usbotg(void)
+{
+       int in_pad, out_pad;
+
+       /* Set up pins for USBOTG. */
+       mxc_request_iomux(MX35_PIN_USBOTG_PWR,
+                         MUX_CONFIG_SION | MUX_CONFIG_FUNC);
+       mxc_request_iomux(MX35_PIN_USBOTG_OC,
+                         MUX_CONFIG_SION | MUX_CONFIG_FUNC);
+
+       in_pad = PAD_CTL_DRV_3_3V | PAD_CTL_HYS_SCHMITZ | PAD_CTL_PKE_ENABLE |
+               PAD_CTL_PUE_PUD | PAD_CTL_100K_PD | PAD_CTL_ODE_CMOS |
+               PAD_CTL_DRV_NORMAL | PAD_CTL_SRE_SLOW;
+       out_pad = PAD_CTL_DRV_3_3V | PAD_CTL_HYS_CMOS | PAD_CTL_PKE_NONE |
+               PAD_CTL_ODE_CMOS | PAD_CTL_DRV_NORMAL | PAD_CTL_SRE_SLOW;
+
+       mxc_iomux_set_pad(MX35_PIN_USBOTG_PWR, out_pad);
+       mxc_iomux_set_pad(MX35_PIN_USBOTG_OC, in_pad);
+}
+
 static void setup_iomux_fec(void)
 {
        int pad;
@@ -189,6 +209,7 @@ int board_early_init_f(void)
        __raw_writel(readl(&ccm->rcsr) | MXC_CCM_RCSR_NFC_FMS, &ccm->rcsr);
 
        setup_iomux_i2c();
+       setup_iomux_usbotg();
        setup_iomux_fec();
        setup_iomux_spi();
 

diff --git a/include/configs/mx35pdk.h b/include/configs/mx35pdk.h
index d89db7af1537741fd540c07dbb925e414570bccb..00171a7cec5ae33beab7ad9a67b12db1b4d896d2 100644 (file)
--- a/include/configs/mx35pdk.h
+++ b/include/configs/mx35pdk.h
@@ -112,6 +112,8 @@
 #define CONFIG_NET_RETRY_COUNT 100
 #define CONFIG_CMD_DATE
 
+#define CONFIG_CMD_USB
+#define CONFIG_USB_STORAGE
 #define CONFIG_CMD_MMC
 #define CONFIG_DOS_PARTITION
 #define CONFIG_EFI_PARTITION
@@ -244,6 +246,18 @@
 #define CONFIG_MXC_NAND_HWECC
 #define CONFIG_SYS_NAND_LARGEPAGE
 
+/* EHCI driver */
+#define CONFIG_USB_EHCI
+#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS     1
+#define CONFIG_EHCI_IS_TDI
+#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
+#define CONFIG_USB_EHCI_MXC
+#define CONFIG_MXC_USB_PORT    0
+#define CONFIG_MXC_USB_FLAGS   (MXC_EHCI_INTERFACE_DIFF_UNI | \
+                                MXC_EHCI_POWER_PINS_ENABLED | \
+                                MXC_EHCI_OC_PIN_ACTIVE_LOW)
+#define CONFIG_MXC_USB_PORTSC  (MXC_EHCI_UTMI_16BIT | MXC_EHCI_MODE_UTMI)
+
 /* mmc driver */
 #define CONFIG_MMC
 #define CONFIG_GENERIC_MMC