ARMV7: OMAP: Enable input driver on Overo's MMC1_CLK and MMC3_CLK pinmux setup

This patch modifies the pinmux setup for MMC1_CLK and MMC3_CLK to enable
the input driver.  MMC2_CLK was already properly configured.

Signed-off-by: Steve Sakoman <steve@sakoman.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

diff --git a/board/overo/overo.h b/board/overo/overo.h
index 18735232a1513f85450ec6143976125e02f19688..fff43dac9c28a029af1b5a01e88760387a3bb36a 100644 (file)
--- a/board/overo/overo.h
+++ b/board/overo/overo.h
@@ -200,7 +200,7 @@ const omap3_sysinfo sysinfo = {
        MUX_VAL(CP(MCBSP2_DR),          (IEN  | PTD | DIS | M0)) /*McBSP2_DR*/\
        MUX_VAL(CP(MCBSP2_DX),          (IDIS | PTD | DIS | M0)) /*McBSP2_DX*/\
  /*Expansion card */\
-       MUX_VAL(CP(MMC1_CLK),           (IDIS | PTU | EN  | M0)) /*MMC1_CLK*/\
+       MUX_VAL(CP(MMC1_CLK),           (IEN  | PTU | EN  | M0)) /*MMC1_CLK*/\
        MUX_VAL(CP(MMC1_CMD),           (IEN  | PTU | EN  | M0)) /*MMC1_CMD*/\
        MUX_VAL(CP(MMC1_DAT0),          (IEN  | PTU | EN  | M0)) /*MMC1_DAT0*/\
        MUX_VAL(CP(MMC1_DAT1),          (IEN  | PTU | EN  | M0)) /*MMC1_DAT1*/\
@@ -301,7 +301,7 @@ const omap3_sysinfo sysinfo = {
        MUX_VAL(CP(SYS_OFF_MODE),       (IEN  | PTD | DIS | M0)) /*SYS_OFF_MODE*/\
        MUX_VAL(CP(SYS_CLKOUT1),        (IEN  | PTD | DIS | M0)) /*SYS_CLKOUT1*/\
        MUX_VAL(CP(SYS_CLKOUT2),        (IEN  | PTU | EN  | M4)) /*GPIO_186*/\
-       MUX_VAL(CP(ETK_CLK_ES2),        (IDIS | PTU | EN  | M2)) /*MMC3_CLK*/\
+       MUX_VAL(CP(ETK_CLK_ES2),        (IEN  | PTU | EN  | M2)) /*MMC3_CLK*/\
        MUX_VAL(CP(ETK_CTL_ES2),        (IEN  | PTU | EN  | M2)) /*MMC3_CMD*/\
        MUX_VAL(CP(ETK_D0_ES2),         (IEN  | PTU | EN  | M4)) /*GPIO_14*/\
        MUX_VAL(CP(ETK_D1_ES2),         (IEN  | PTD | EN  | M4)) /*GPIO_15 - X_GATE*/\