Changes for U-Boot 1.1.3:
======================================================================
+* Patches by Richard Woodruff, 01 Oct 2004:
+ add support for the TI OMAP2420 processor and its H4 reference
+ board
+
+* Patch by Christian Pellegrin, 24 Sep 2004:
+ Added support for NE2000 compatible (DP8390, DP83902) NICs.
+
* Patch by Leif Lindholm, 23 Sep 2004:
add support for the AMD db1550 board
omap5912osk ARM926EJS
+Richard Woodruff <r-woodruff2@ti.com>
+
+ omap2420h4 ARM1136EJS
+
David Müller <d.mueller@elsoft.ch>
smdk2410 ARM920T
versatile \
"
+#########################################################################
+## ARM11 Systems
+#########################################################################
+LIST_ARM11="omap2420h4"
+
#########################################################################
## Xscale Systems
#########################################################################
LIST_ixp="ixdp425"
-LIST_arm="${LIST_SA} ${LIST_ARM7} ${LIST_ARM9} ${LIST_pxa} ${LIST_ixp}"
+LIST_arm=" \
+ ${LIST_SA} \
+ ${LIST_ARM7} ${LIST_ARM9} ${LIST_ARM11} \
+ ${LIST_pxa} ${LIST_ixp} \
+"
#########################################################################
## MIPS Systems
do
case "$arg" in
ppc|5xx|5xxx|8xx|8220|824x|8260|85xx|4xx|7xx|74xx| \
- arm|SA|ARM7|ARM9|pxa|ixp| \
+ arm|SA|ARM7|ARM9|ARM11|pxa|ixp| \
microblaze| \
mips| \
nios|nios2| \
xsengine_config : unconfig
@./mkconfig $(@:_config=) arm pxa xsengine
+#########################################################################
+## ARM1136 Systems
+#########################################################################
+omap2420h4_config : unconfig
+ @./mkconfig $(@:_config=) arm arm1136 omap2420h4
+
#========================================================================
# i386
#========================================================================
- s3c24x0 Files specific to Samsung S3C24X0 CPUs
- arm925t Files specific to ARM 925 CPUs
- arm926ejs Files specific to ARM 926 CPUs
+ - arm1136 Files specific to ARM 1136 CPUs
- at91rm9200 Files specific to Atmel AT91RM9200 CPUs
- i386 Files specific to i386 CPUs
- ixp Files specific to Intel XScale IXP CPUs
ARM based boards:
-----------------
- CONFIG_AT91RM9200DK, CONFIG_CERF250, CONFIG_DNP1110,
- CONFIG_EP7312, CONFIG_H2_OMAP1610, CONFIG_HHP_CRADLE,
- CONFIG_IMPA7, CONFIG_INNOVATOROMAP1510, CONFIG_INNOVATOROMAP1610,
- CONFIG_LART, CONFIG_LPD7A400 CONFIG_LUBBOCK,
- CONFIG_OSK_OMAP5912, CONFIG_SHANNON, CONFIG_P2_OMAP730,
- CONFIG_SMDK2400, CONFIG_SMDK2410, CONFIG_TRAB,
- CONFIG_VCMA9
+ CONFIG_AT91RM9200DK, CONFIG_CERF250, CONFIG_DNP1110,
+ CONFIG_EP7312, CONFIG_H2_OMAP1610, CONFIG_HHP_CRADLE,
+ CONFIG_IMPA7, CONFIG_INNOVATOROMAP1510, CONFIG_INNOVATOROMAP1610,
+ CONFIG_LART, CONFIG_LPD7A400 CONFIG_LUBBOCK,
+ CONFIG_OSK_OMAP5912, CONFIG_OMAP2420H4, CONFIG_SHANNON,
+ CONFIG_P2_OMAP730, CONFIG_SMDK2400, CONFIG_SMDK2410,
+ CONFIG_TRAB, CONFIG_VCMA9
MicroBlaze based boards:
------------------------
FADS850SAR_config omap1610h2_config TQM850L_config
FADS860T_config omap1610inn_config TQM855L_config
FPS850L_config omap5912osk_config TQM860L_config
- WALNUT405_config
+ omap2420h4_config WALNUT405_config
Yukon8220_config
ZPC1900_config
--- /dev/null
+#
+# (C) Copyright 2000, 2001, 2002
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = lib$(BOARD).a
+
+OBJS := omap2420h4.o flash.o mem.o sys_info.o
+SOBJS := platform.o
+
+$(LIB): $(OBJS) $(SOBJS)
+ $(AR) crv $@ $^
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+ $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+-include .depend
+
+#########################################################################
--- /dev/null
+#
+# (C) Copyright 2004
+# Texas Instruments, <www.ti.com>
+#
+# TI H4 board with OMAP2420 (ARM1136) cpu
+# see http://www.ti.com/ for more information on Texas Instruments
+#
+# H4 has 1 bank of 32MB or 64MB mDDR-SDRAM on CS0
+# H4 has 1 bank of 32MB or 00MB mDDR-SDRAM on CS1
+# Physical Address:
+# 8000'0000 (bank0)
+# A000/0000 (bank1) ES2 will be configurable
+# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000
+# (mem base + reserved)
+
+# For use with external or internal boots.
+# CONFIG_PARTIAL_SRAM must be defined to use this.
+TEXT_BASE = 0x80e80000
+
+# Used with full SRAM boot.
+# This is either with a GP system or a signed boot image.
+# easiest, and safest way to go if you can.
+# Comment out //CONFIG_PARTIAL_SRAM for this one.
+#
+#TEXT_BASE = 0x40280000
+
--- /dev/null
+/*
+ * (C) Copyright 2001
+ * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
+ *
+ * (C) Copyright 2001-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2003
+ * Texas Instruments, <www.ti.com>
+ * Kshitij Gupta <Kshitij@ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/sizes.h>
+#include <linux/byteorder/swab.h>
+
+#define PHYS_FLASH_SECT_SIZE SZ_128K
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+
+/* Board support for 1 or 2 flash devices */
+#undef FLASH_PORT_WIDTH32
+#define FLASH_PORT_WIDTH16
+
+#ifdef FLASH_PORT_WIDTH16
+# define FLASH_PORT_WIDTH ushort
+# define FLASH_PORT_WIDTHV vu_short
+# define SWAP(x) __swab16(x)
+#else
+# define FLASH_PORT_WIDTH ulong
+# define FLASH_PORT_WIDTHV vu_long
+# define SWAP(x) __swab32(x)
+#endif
+
+#define FPW FLASH_PORT_WIDTH
+#define FPWV FLASH_PORT_WIDTHV
+
+#define mb() __asm__ __volatile__ ("" : : : "memory")
+
+
+/* Flash Organization Structure */
+typedef struct OrgDef {
+ unsigned int sector_number;
+ unsigned int sector_size;
+} OrgDef;
+
+
+/* Flash Organizations */
+OrgDef OrgIntel_28F256L18T[] = {
+ {4, SZ_32K}, /* 4 * 32kBytes sectors */
+ {255, SZ_128K}, /* 255 * 128kBytes sectors */
+};
+
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+unsigned long flash_init (void);
+static ulong flash_get_size (FPW * addr, flash_info_t * info);
+static int write_data (flash_info_t * info, ulong dest, FPW data);
+static void flash_get_offsets (ulong base, flash_info_t * info);
+void inline spin_wheel (void);
+void flash_print_info (flash_info_t * info);
+void flash_unprotect_sectors (FPWV * addr);
+int flash_erase (flash_info_t * info, int s_first, int s_last);
+int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt);
+void flash_unlock(flash_info_t * info, int bank);
+int flash_probe(void);
+
+/*-----------------------------------------------------------------------
+ */
+
+/* see if flash is ok */
+int flash_probe(void)
+{
+ return(flash_get_size ((FPW *) PHYS_FLASH_1, &flash_info[0]));
+}
+
+unsigned long flash_init (void)
+{
+ int i;
+ ulong size = 0;
+ for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
+ switch (i) {
+ case 0:
+ flash_get_size ((FPW *) PHYS_FLASH_1, &flash_info[i]);
+ flash_get_offsets (PHYS_FLASH_1, &flash_info[i]);
+ /* to reset the lock bit */
+ flash_unlock(&flash_info[i],i);
+ break;
+ case 1:
+ flash_get_size ((FPW *) PHYS_FLASH_2, &flash_info[i]);
+ flash_get_offsets (PHYS_FLASH_2, &flash_info[i]);
+ /* to reset the lock bit */
+ flash_unlock(&flash_info[i],i);
+ break;
+
+ default:
+ panic ("configured too many flash banks!\n");
+ break;
+ }
+ size += flash_info[i].size;
+ }
+
+ /* Protect monitor and environment sectors
+ */
+ flash_protect (FLAG_PROTECT_SET,
+ CFG_FLASH_BASE,
+ CFG_FLASH_BASE + monitor_flash_len - 1, &flash_info[0]);
+
+ flash_protect (FLAG_PROTECT_SET,
+ CFG_ENV_ADDR,
+ CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[0]);
+
+ return size;
+}
+
+/*-----------------------------------------------------------------------
+ */
+void flash_unlock(flash_info_t * info, int bank)
+{
+ int j;
+ if (!bank)
+ j=2; /* leave 0,1 locked for boot bank */
+ else
+ j=0; /* get the whole bank for #2 */
+
+ for (;j<CFG_MAX_FLASH_SECT;j++) {
+ FPWV *addr = (FPWV *) (info->start[j]);
+ if (addr == NULL) {
+ printf("Warning Flash probe failed\n");
+ break;
+ }
+ flash_unprotect_sectors (addr);
+ *addr = (FPW) 0x00500050;/* clear status register */
+ *addr = (FPW) 0x00FF00FF;/* resest to read mode */
+ }
+}
+
+/*-----------------------------------------------------------------------
+ */
+static void flash_get_offsets (ulong base, flash_info_t * info)
+{
+ int i;
+ volatile int r; /* gcc 3.4.0-1 strangeness, need to follow up.*/
+
+ if (info->flash_id == FLASH_UNKNOWN) {
+ return;
+ }
+
+ if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) {
+ for (i = 0; i < info->sector_count; i++) {
+ if (i > 254) { /* 255,256,257,258 */
+ r=i;
+ info->start[i] = base + (((r-(int)255) * SZ_32K) + (255*PHYS_FLASH_SECT_SIZE));
+ info->protect[i] = 0;
+ } else {
+ info->start[i] = base + (i * PHYS_FLASH_SECT_SIZE);
+ info->protect[i] = 0;
+ }
+ }
+ }
+}
+
+/*-----------------------------------------------------------------------
+ */
+void flash_print_info (flash_info_t * info)
+{
+ int i;
+
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf ("missing or unknown FLASH type\n");
+ return;
+ }
+
+ switch (info->flash_id & FLASH_VENDMASK) {
+ case FLASH_MAN_INTEL:
+ printf ("INTEL ");
+ break;
+ default:
+ printf ("Unknown Vendor ");
+ break;
+ }
+
+ switch (info->flash_id & FLASH_TYPEMASK) {
+ case FLASH_28F256L18T:
+ printf ("FLASH 28F256L18T\n");
+ break;
+ default:
+ printf ("Unknown Chip Type\n");
+ break;
+ }
+
+ printf (" Size: %ld MB in %d Sectors\n",
+ info->size >> 20, info->sector_count);
+
+ printf (" Sector Start Addresses:");
+ for (i = 0; i < info->sector_count; ++i) {
+ if ((i % 5) == 0)
+ printf ("\n ");
+ printf (" %08lX%s",
+ info->start[i], info->protect[i] ? " (RO)" : " ");
+ }
+ printf ("\n");
+ return;
+}
+
+/*
+ * The following code cannot be run from FLASH!
+ */
+static ulong flash_get_size (FPW * addr, flash_info_t * info)
+{
+ volatile FPW value;
+ /* mb(); this one makes ARM11 err go away, but I want it :) as a guide to problems */
+
+ /* Write auto select command: read Manufacturer ID */
+ addr[0x5555] = (FPW) 0x00AA00AA;
+ addr[0x2AAA] = (FPW) 0x00550055;
+ addr[0x5555] = (FPW) 0x00900090;
+
+ mb ();
+ value = addr[0] & 0xFF; /* just looking for 89 (8989 is hw pat)*/
+
+ switch (value) {
+
+ case (FPW) INTEL_MANUFACT:
+ info->flash_id = FLASH_MAN_INTEL;
+ break;
+
+ default:
+ info->flash_id = FLASH_UNKNOWN;
+ info->sector_count = 0;
+ info->size = 0;
+ addr[0] = (FPW) 0x00FF00FF; /* restore read mode */
+ return(0); /* no or unknown flash */
+ }
+
+ mb ();
+ value = addr[1]; /* device ID */
+ switch (value) {
+
+ case (FPW) (INTEL_ID_28F256L18T): /* 880D */
+ info->flash_id += FLASH_28F256L18T;
+ info->sector_count = 259; /*0-258*/
+ info->size = SZ_32M;
+ break; /* => 32 MB */
+
+ default:
+ info->flash_id = FLASH_UNKNOWN;
+ break;
+ }
+
+ if (info->sector_count > CFG_MAX_FLASH_SECT) {
+ printf ("** ERROR: sector count %d > max (%d) **\n",
+ info->sector_count, CFG_MAX_FLASH_SECT);
+ info->sector_count = CFG_MAX_FLASH_SECT;
+ }
+
+ addr[0] = (FPW) 0x00FF00FF; /* restore read mode */
+
+ return(info->size);
+}
+
+
+/* unprotects a sector for write and erase
+ * on some intel parts, this unprotects the entire chip, but it
+ * wont hurt to call this additional times per sector...
+ */
+void flash_unprotect_sectors (FPWV * addr)
+{
+#define PD_FINTEL_WSMS_READY_MASK 0x0080
+
+ *addr = (FPW) 0x00500050; /* clear status register */
+
+ /* this sends the clear lock bit command */
+ *addr = (FPW) 0x00600060;
+ *addr = (FPW) 0x00D000D0;
+}
+
+
+/*-----------------------------------------------------------------------
+ */
+
+int flash_erase (flash_info_t * info, int s_first, int s_last)
+{
+ int prot, sect;
+ ulong type, start, last;
+ int rcode = 0;
+#ifdef CONFIG_USE_IRQ
+ int iflag;
+#endif
+
+ if ((s_first < 0) || (s_first > s_last)) {
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf ("- missing\n");
+ } else {
+ printf ("- no sectors to erase\n");
+ }
+ return 1;
+ }
+
+ type = (info->flash_id & FLASH_VENDMASK);
+ if ((type != FLASH_MAN_INTEL)) {
+ printf ("Can't erase unknown flash type %08lx - aborted\n",
+ info->flash_id);
+ return 1;
+ }
+
+ prot = 0;
+ for (sect = s_first; sect <= s_last; ++sect) {
+ if (info->protect[sect]) {
+ prot++;
+ }
+ }
+
+ if (prot) {
+ printf ("- Warning: %d protected sectors will not be erased!\n",
+ prot);
+ } else {
+ printf ("\n");
+ }
+
+
+ start = get_timer (0);
+ last = start;
+
+#ifdef CONFIG_USE_IRQ
+ /* Disable interrupts which might cause a timeout here */
+ iflag = disable_interrupts ();
+#endif
+
+ /* Start erase on unprotected sectors */
+ for (sect = s_first; sect <= s_last; sect++) {
+ if (info->protect[sect] == 0) { /* not protected */
+ FPWV *addr = (FPWV *) (info->start[sect]);
+ FPW status;
+
+ printf ("Erasing sector %2d ... ", sect);
+
+ flash_unprotect_sectors (addr);
+
+ /* arm simple, non interrupt dependent timer */
+ reset_timer_masked ();
+
+ *addr = (FPW) 0x00500050;/* clear status register */
+ *addr = (FPW) 0x00200020;/* erase setup */
+ *addr = (FPW) 0x00D000D0;/* erase confirm */
+
+ while (((status =
+ *addr) & (FPW) 0x00800080) !=
+ (FPW) 0x00800080) {
+ if (get_timer_masked () >
+ CFG_FLASH_ERASE_TOUT) {
+ printf ("Timeout\n");
+ /* suspend erase */
+ *addr = (FPW) 0x00B000B0;
+ /* reset to read mode */
+ *addr = (FPW) 0x00FF00FF;
+ rcode = 1;
+ break;
+ }
+ }
+
+ /* clear status register cmd. */
+ *addr = (FPW) 0x00500050;
+ *addr = (FPW) 0x00FF00FF;/* resest to read mode */
+ printf (" done\n");
+ }
+ }
+#ifdef CONFIG_USE_IRQ
+ if (iflag)
+ enable_interrupts();
+#endif
+
+ return rcode;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ * 4 - Flash not identified
+ */
+
+int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
+{
+ ulong cp, wp;
+ FPW data;
+ int count, i, l, rc, port_width;
+
+ if (info->flash_id == FLASH_UNKNOWN) {
+ return 4;
+ }
+/* get lower word aligned address */
+#ifdef FLASH_PORT_WIDTH16
+ wp = (addr & ~1);
+ port_width = 2;
+#else
+ wp = (addr & ~3);
+ port_width = 4;
+#endif
+
+ /*
+ * handle unaligned start bytes
+ */
+ if ((l = addr - wp) != 0) {
+ data = 0;
+ for (i = 0, cp = wp; i < l; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *) cp);
+ }
+ for (; i < port_width && cnt > 0; ++i) {
+ data = (data << 8) | *src++;
+ --cnt;
+ ++cp;
+ }
+ for (; cnt == 0 && i < port_width; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *) cp);
+ }
+
+ if ((rc = write_data (info, wp, SWAP (data))) != 0) {
+ return(rc);
+ }
+ wp += port_width;
+ }
+
+ /*
+ * handle word aligned part
+ */
+ count = 0;
+ while (cnt >= port_width) {
+ data = 0;
+ for (i = 0; i < port_width; ++i) {
+ data = (data << 8) | *src++;
+ }
+ if ((rc = write_data (info, wp, SWAP (data))) != 0) {
+ return(rc);
+ }
+ wp += port_width;
+ cnt -= port_width;
+ if (count++ > 0x800) {
+ spin_wheel ();
+ count = 0;
+ }
+ }
+
+ if (cnt == 0) {
+ return(0);
+ }
+
+ /*
+ * handle unaligned tail bytes
+ */
+ data = 0;
+ for (i = 0, cp = wp; i < port_width && cnt > 0; ++i, ++cp) {
+ data = (data << 8) | *src++;
+ --cnt;
+ }
+ for (; i < port_width; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *) cp);
+ }
+
+ return(write_data (info, wp, SWAP (data)));
+}
+
+/*-----------------------------------------------------------------------
+ * Write a word or halfword to Flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+static int write_data (flash_info_t * info, ulong dest, FPW data)
+{
+ FPWV *addr = (FPWV *) dest;
+ ulong status;
+#ifdef CONFIG_USE_IRQ
+ int iflag;
+#endif
+
+ /* Check if Flash is (sufficiently) erased */
+ if ((*addr & data) != data) {
+ printf ("not erased at %08lx (%x)\n", (ulong) addr, *addr);
+ return(2);
+ }
+ /* Disable interrupts which might cause a timeout here */
+#ifdef CONFIG_USE_IRQ
+ iflag = disable_interrupts ();
+#endif
+ *addr = (FPW) 0x00400040; /* write setup */
+ *addr = data;
+
+ /* arm simple, non interrupt dependent timer */
+ reset_timer_masked ();
+
+ /* wait while polling the status register */
+ while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) {
+ if (get_timer_masked () > CFG_FLASH_WRITE_TOUT) {
+ *addr = (FPW) 0x00FF00FF; /* restore read mode */
+ return(1);
+ }
+ }
+ *addr = (FPW) 0x00FF00FF; /* restore read mode */
+
+#ifdef CONFIG_USE_IRQ
+ if (iflag)
+ enable_interrupts();
+#endif
+
+ return(0);
+}
+
+void inline spin_wheel (void)
+{
+ static int p = 0;
+ static char w[] = "\\/-";
+
+ printf ("\010%c", w[p]);
+ (++p == 3) ? (p = 0) : 0;
+}
--- /dev/null
+/*
+ * (C) Copyright 2004
+ * Texas Instruments, <www.ti.com>
+ * Richard Woodruff <r-woodruff2@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/omap2420.h>
+#include <asm/io.h>
+#include <asm/arch/bits.h>
+#include <asm/arch/mux.h>
+#include <asm/arch/mem.h>
+#include <asm/arch/clocks.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/sys_info.h>
+
+/************************************************************
+ * sdelay() - simple spin loop. Will be constant time as
+ * its generally used in 12MHz bypass conditions only. This
+ * is necessary until timers are accessible.
+ *
+ * not inline to increase chances its in cache when called
+ *************************************************************/
+void sdelay (unsigned long loops)
+{
+ __asm__ volatile ("1:\n"
+ "subs %0, %1, #1\n"
+ "bne 1b":"=r" (loops):"0" (loops));
+}
+
+/*********************************************************************************
+ * prcm_init() - inits clocks for PRCM as defined in clocks.h (config II default).
+ * -- called from SRAM, or Flash (using temp SRAM stack).
+ *********************************************************************************/
+void prcm_init(void)
+{
+ u32 rev,div;
+#ifdef CONFIG_PARTIAL_SRAM
+ void (*f_lock_pll) (u32, u32, u32, u32);
+ extern void *_end_vect, *_start;
+
+ f_lock_pll = (void *)((u32)&_end_vect - (u32)&_start + SRAM_VECT_CODE);
+#endif
+
+ __raw_writel(0, CM_FCLKEN1_CORE); /* stop all clocks to reduce ringing */
+ __raw_writel(0, CM_FCLKEN2_CORE); /* may not be necessary */
+ __raw_writel(0, CM_ICLKEN1_CORE);
+ __raw_writel(0, CM_ICLKEN2_CORE);
+
+ __raw_writel(DPLL_OUT, CM_CLKSEL2_PLL); /* set DPLL out */
+ __raw_writel(MPU_DIV, CM_CLKSEL_MPU); /* set MPU divider */
+ __raw_writel(DSP_DIV, CM_CLKSEL_DSP); /* set dsp and iva dividers */
+ __raw_writel(GFX_DIV, CM_CLKSEL_GFX); /* set gfx dividers */
+
+ rev = get_cpu_rev();
+ if (rev == CPU_2420_ES1 || rev == CPU_2422_ES1)
+ div = BUS_DIV_ES1;
+ else
+ div = BUS_DIV;
+ __raw_writel(div, CM_CLKSEL1_CORE);/* set L3/L4/USB/Display/Vlnc/SSi dividers */
+ sdelay(1000);
+
+#ifndef CONFIG_PARTIAL_SRAM
+ /* If running fully from SRAM this is OK. The Flash bus drops out for just a little.
+ * but then comes back. If running from Flash this sequence kills you, thus you need
+ * to run it using CONFIG_PARTIAL_SRAM.
+ */
+ __raw_writel(MODE_BYPASS_FAST, CM_CLKEN_PLL); /* go to bypass, fast relock */
+ wait_on_value(BIT0|BIT1, BIT1, CM_IDLEST_CKGEN, LDELAY); /* wait till in bypass */
+
+ /* set clock selection and dpll dividers. */
+ __raw_writel(DPLL_VAL, CM_CLKSEL1_PLL); /* set pll for target rate */
+ __raw_writel(COMMIT_DIVIDERS, PRCM_CLKCFG_CTRL); /* commit dividers */
+ sdelay(10000);
+ __raw_writel(DPLL_LOCK, CM_CLKEN_PLL); /* enable dpll */
+ sdelay(10000);
+ wait_on_value(BIT0|BIT1, BIT2, CM_IDLEST_CKGEN, LDELAY); /*wait for dpll lock */
+#else
+/* if running from flash, need to jump to small relocated code area in SRAM.
+ * This is the only safe spot to do configurations from.
+ */
+ (*f_lock_pll)(PRCM_CLKCFG_CTRL, CM_CLKEN_PLL, DPLL_LOCK, CM_IDLEST_CKGEN);
+#endif
+
+ __raw_writel(DPLL_LOCK|APLL_LOCK, CM_CLKEN_PLL); /* enable apll */
+ wait_on_value(BIT8, BIT8, CM_IDLEST_CKGEN, LDELAY); /* wait for apll lock */
+ sdelay(1000);
+}
+
+/***********************************************
+ * memif_init() - init the gpmc and sdrc
+ * - early init routines, called from flash or
+ * SRAM.
+ ***********************************************/
+void memif_init(void)
+{
+ sdrc_init();
+#ifndef CONFIG_PARTIAL_SRAM /* don't init if calling from flash */
+ gpmc_init();
+#endif
+}
+
+/********************************************************
+ * mem_ok() - test used to see if timings are correct
+ * for a part. Helps in gussing which part
+ * we are currently using.
+ *******************************************************/
+u32 mem_ok(void)
+{ u32 val;
+ __raw_writel(0x0,OMAP2420_SDRC_CS0+0x400); /* clear pos A */
+ __raw_writel(0x12345678, OMAP2420_SDRC_CS0);/* pattern to pos B */
+ val = __raw_readl(OMAP2420_SDRC_CS0+0x400); /* get pos A value */
+ if (val != 0) /* see if pos A value changed*/
+ return(0);
+ else
+ return(1);
+}
+
+/********************************************************
+ * sdrc_init() - init the sdrc chip selects CS0 and CS1
+ * - early init routines, called from flash or
+ * SRAM.
+ *******************************************************/
+void sdrc_init(void)
+{
+ #define EARLY_INIT 1
+ do_sdrc_init(SDRC_CS0_OSET, EARLY_INIT); /* only init up first bank here */
+}
+
+/**********************************************************
+ * do_sdrc_init(): initialize the SDRAM for use.
+ * -called from low level code with stack only.
+ * -code sets up SDRAM timing and muxing for 2422 or 2420.
+ * -optimal settings can be placed here, or redone after i2c
+ * inspection of board info
+ *
+ * !!! When ES1 comes out need to conditionalize RFR value!!!
+ **********************************************************/
+void do_sdrc_init(u32 offset, u32 early)
+{
+ u32 cpu, bug=0, rev, shared=0, cs0=0, pmask=0,first=1;
+ sdrc_data_t *sdata; /* do not change type */
+
+ static const sdrc_data_t sdrc_2422 =
+ {
+ H4_2422_SDRC_SHARING, H4_2422_SDRC_MDCFG_0, H4_2422_SDRC_ACTIM_CTRLA_0,
+ H4_2422_SDRC_ACTIM_CTRLB_0, H4_2422_SDRC_RFR_CTRL_ES1, H4_2422_SDRC_MR_0,
+ H4_2422_SDRC_DLLA_CTRL, H4_2422_SDRC_DLLB_CTRL
+ };
+ static const sdrc_data_t sdrc_2420 =
+ {
+ H4_2420_SDRC_SHARING, H4_2420_SDRC_MDCFG_0, H4_2420_SDRC_ACTIM_CTRLA_0,
+ H4_2420_SDRC_ACTIM_CTRLB_0, H4_2420_SDRC_RFR_CTRL_ES1, H4_2420_SDRC_MR_0,
+ H4_2420_SDRC_DLLA_CTRL, H4_2420_SDRC_DLLB_CTRL
+ };
+
+ if (offset == SDRC_CS0_OSET)
+ cs0 = shared = 1; /* int regs shared between both chip select */
+
+ cpu = get_cpu_type();
+
+ /* warning generated, though code generation is correct. this may bite later, but is ok for now.
+ * there is only so much C code you can do on stack only operation.
+ */
+ if (cpu == CPU_2422)
+ sdata = &sdrc_2422;
+ else
+ sdata = &sdrc_2420;
+ __asm__ __volatile__("": : :"memory");
+#ifdef CONFIG_PARTIAL_SRAM
+ /* u-boot is compiled to run in DDR at 8xxxxxxx. If we use data here which is not pc relative
+ * we need to get the address correct. We need to find the current flash mapping to dress up
+ * the initial pointer load. As long as this is const data we should be ok.
+ */
+ if(early)
+ sdata = (sdrc_data_t *)(((u32)sdata & 0x0003FFFF) | get_gpmc0_base());
+#endif
+
+ men_combo:
+
+ if (!early && get_mem_type() == DDR_COMBO) { /* combo part has a shared CKE signal, can't use feature */
+ pmask = BIT2;
+ first = 0; /* trigger ddr_combo init */
+ }
+
+ if (shared) {
+ __raw_writel(__raw_readl(SMS_SYSCONFIG)|SMART_IDLE, SMS_SYSCONFIG);
+ __raw_writel(SMART_IDLE|SOFTRESET, SDRC_SYSCONFIG); /* reset sdrc */
+ wait_on_value(BIT0, BIT0, SDRC_STATUS, 12000000); /* wait till reset done set */
+ __raw_writel(SMART_IDLE, SDRC_SYSCONFIG); /* clear soft reset */
+ __raw_writel(sdata->sdrc_sharing, SDRC_SHARING);
+ __raw_writel((__raw_readl(SDRC_POWER)|SMART_IDLE) & ~pmask, SDRC_POWER);
+ }
+ if (first)
+ __raw_writel(sdata->sdrc_mdcfg_0, SDRC_MCFG_0+offset);
+ else {
+ __raw_writel((__raw_readl(SDRC_POWER)|SMART_IDLE) & ~pmask, SDRC_POWER);
+ __raw_writel(H4_2420_COMBO_MDCFG_0,SDRC_MCFG_0+offset);
+ }
+
+ if (cs0) {
+ __raw_writel(sdata->sdrc_actim_ctrla_0, SDRC_ACTIM_CTRLA_0);
+ __raw_writel(sdata->sdrc_actim_ctrlb_0, SDRC_ACTIM_CTRLB_0);
+ } else {
+ __raw_writel(sdata->sdrc_actim_ctrla_0, SDRC_ACTIM_CTRLA_1);
+ __raw_writel(sdata->sdrc_actim_ctrlb_0, SDRC_ACTIM_CTRLB_1);
+ }
+
+ __raw_writel(sdata->sdrc_rfr_ctrl, SDRC_RFR_CTRL+offset);
+
+ /* init sequence for _mDDR_ using manual commands (DDR is a bit different) */
+ __raw_writel(CMD_NOP, SDRC_MANUAL_0+offset);
+ sdelay(5000); /* susposed to be 100us per design spec for mddr*/
+ __raw_writel(CMD_PRECHARGE, SDRC_MANUAL_0+offset);
+ __raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_0+offset);
+ __raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_0+offset);
+
+ /*
+ * CSx SDRC Mode Register
+ * Burst length = 4 - DDR memory
+ * Serial mode
+ * CAS latency = x
+ */
+ __raw_writel(sdata->sdrc_mr_0, SDRC_MR_0+offset);
+
+ /* NOTE: ES1 242x _BUG_ DLL */
+ rev = get_cpu_rev();
+ if (rev == CPU_2420_ES1 || rev == CPU_2422_ES1)
+ bug = BIT0;
+ /* enable & load up DLL with good value for 75MHz, and set phase to 90% */
+ if (shared) {
+ __raw_writel(sdata->sdrc_dlla_ctrl, SDRC_DLLA_CTRL);
+ __raw_writel(sdata->sdrc_dlla_ctrl & ~(BIT2|bug), SDRC_DLLA_CTRL);
+ __raw_writel(sdata->sdrc_dllb_ctrl, SDRC_DLLB_CTRL);
+ __raw_writel(sdata->sdrc_dllb_ctrl & ~(BIT2|bug) , SDRC_DLLB_CTRL);
+ }
+ sdelay(9000);
+ if (!first || mem_ok()) /* passed test or 2nd bank init */
+ return;
+ else {
+ first = 0;
+ goto men_combo;
+ }
+}
+
+
+/*****************************************************
+ * gpmc_init(): init gpmc bus
+ * Init GPMC for x16, MuxMode (SDRAM in x32).
+ * This code can only be executed from SRAM or SDRAM.
+ *****************************************************/
+void gpmc_init(void)
+{
+ u32 mux=0, mtype, mwidth;
+
+ /* global settings */
+ __raw_writel(0x10, GPMC_SYSCONFIG); /* smart idle */
+ __raw_writel(0x0, GPMC_IRQENABLE); /* isr's sources masked */
+ __raw_writel(0x1, GPMC_TIMEOUT_CONTROL);/* timeout disable */
+ __raw_writel(0x111, GPMC_CONFIG); /* set nWP, disable limited addr */
+
+ /* discover bus connection from sysboot */
+ if (is_gpmc_muxed() == GPMC_MUXED)
+ mux = BIT9;
+ mtype = get_gpmc0_type();
+ mwidth = get_gpmc0_width();
+
+ /* setup cs0 */
+ __raw_writel(0x0, GPMC_CONFIG7_0); /* disable current map */
+ sdelay(1000);
+ __raw_writel(H4_24XX_GPMC_CONFIG1_0|mux|mtype|mwidth, GPMC_CONFIG1_0);
+ //__raw_writel(H4_24XX_GPMC_CONFIG2_0, GPMC_CONFIG2_0);
+ __raw_writel(H4_24XX_GPMC_CONFIG3_0, GPMC_CONFIG3_0);
+ __raw_writel(H4_24XX_GPMC_CONFIG4_0, GPMC_CONFIG4_0);
+ //__raw_writel(H4_24XX_GPMC_CONFIG5_0, GPMC_CONFIG5_0);
+ __raw_writel(H4_24XX_GPMC_CONFIG7_0, GPMC_CONFIG7_0);/* enable new mapping */
+ sdelay(2000);
+
+ /* setup cs1 */
+ __raw_writel(0, GPMC_CONFIG7_1); /* disable any mapping */
+ sdelay(1000);
+ __raw_writel(H4_24XX_GPMC_CONFIG1_1|mux, GPMC_CONFIG1_1);
+ __raw_writel(H4_24XX_GPMC_CONFIG2_1, GPMC_CONFIG2_1);
+ __raw_writel(H4_24XX_GPMC_CONFIG3_1, GPMC_CONFIG3_1);
+ __raw_writel(H4_24XX_GPMC_CONFIG4_1, GPMC_CONFIG4_1);
+ __raw_writel(H4_24XX_GPMC_CONFIG5_1, GPMC_CONFIG5_1);
+ __raw_writel(H4_24XX_GPMC_CONFIG6_1, GPMC_CONFIG6_1);
+ __raw_writel(H4_24XX_GPMC_CONFIG7_1, GPMC_CONFIG7_1); /* enable mapping */
+ sdelay(2000);
+}
+
--- /dev/null
+/*
+ * (C) Copyright 2004
+ * Texas Instruments, <www.ti.com>
+ * Richard Woodruff <r-woodruff2@ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+#include <asm/arch/omap2420.h>
+#include <asm/io.h>
+#include <asm/arch/bits.h>
+#include <asm/arch/mux.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/sys_info.h>
+#include <asm/arch/mem.h>
+#include <i2c.h>
+#include <asm/mach-types.h>
+
+static void wait_for_command_complete(unsigned int wd_base);
+
+/*******************************************************
+ * Routine: delay
+ * Description: spinning delay to use before udelay works
+ ******************************************************/
+static inline void delay (unsigned long loops)
+{
+ __asm__ volatile ("1:\n"
+ "subs %0, %1, #1\n"
+ "bne 1b":"=r" (loops):"0" (loops));
+}
+
+/*****************************************
+ * Routine: board_init
+ * Description: Early hardware init.
+ *****************************************/
+int board_init (void)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+#ifndef CONFIG_PARTIAL_SRAM
+ s_init(0x0); /* full sram build, never skip clock and sdrc, no point */
+#else
+ gpmc_init();
+#endif
+ gd->bd->bi_arch_number = MACH_TYPE_OMAP_H4; /* board id for linux */
+ gd->bd->bi_boot_params = (OMAP2420_SDRC_CS0+0x100); /* adress of boot parameters */
+
+ return 0;
+}
+
+/**********************************************************
+ * Routine: s_init
+ * Description: Does early system init of muxing and clocks.
+ * - Called at time when only stack is available.
+ **********************************************************/
+void s_init(int skip)
+{
+ watchdog_init();
+ set_muxconf_regs();
+ delay(100);
+
+ if (!skip)
+ prcm_init();
+
+ peripheral_enable();
+ icache_enable();
+#ifndef CONFIG_APTIX
+ if (!skip)
+ memif_init();
+#endif
+}
+
+/*******************************************************
+ * Routine: misc_init_r
+ * Description: Init ethernet (done here so udelay works)
+ ********************************************************/
+int misc_init_r (void)
+{
+ ether_init(); /* better done here so timers are init'ed */
+ return(0);
+}
+
+/****************************************
+ * Routine: watchdog_init
+ * Description: Shut down watch dogs
+ *****************************************/
+void watchdog_init(void)
+{
+ int mode;
+#define GP (BIT8|BIT9)
+
+ /* There are 4 watch dogs. 1 secure, and 3 general purpose.
+ * I would expect that the ROM takes care of the secure one,
+ * but we will try also. Of the 3 GP ones, 1 can reset us
+ * directly, the other 2 only generate MPU interrupts.
+ */
+ mode = (__raw_readl(CONTROL_STATUS) & (BIT8|BIT9));
+ if (mode == GP) {
+ __raw_writel(WD_UNLOCK1 ,WD1_BASE+WSPR);
+ wait_for_command_complete(WD1_BASE);
+ __raw_writel(WD_UNLOCK2 ,WD1_BASE+WSPR);
+ }
+ __raw_writel(WD_UNLOCK1 ,WD2_BASE+WSPR);
+ wait_for_command_complete(WD2_BASE);
+ __raw_writel(WD_UNLOCK2 ,WD2_BASE+WSPR);
+
+#if MPU_WD_CLOCKED /* value 0x10 stick on aptix, BIT4 polarity seems oppsite*/
+ __raw_writel(WD_UNLOCK1 ,WD3_BASE+WSPR);
+ wait_for_command_complete(WD3_BASE);
+ __raw_writel(WD_UNLOCK2 ,WD3_BASE+WSPR);
+
+ __raw_writel(WD_UNLOCK1 ,WD4_BASE+WSPR);
+ wait_for_command_complete(WD4_BASE);
+ __raw_writel(WD_UNLOCK2 ,WD4_BASE+WSPR);
+#endif
+}
+
+/******************************************************
+ * Routine: wait_for_command_complete
+ * Description: Wait for posting to finish on watchdog
+ ******************************************************/
+static void wait_for_command_complete(unsigned int wd_base)
+{
+ int pending = 1;
+ do {
+ pending = __raw_readl(wd_base+WWPS);
+ } while (pending);
+}
+
+/*******************************************************************
+ * Routine:ether_init
+ * Description: take the Ethernet controller out of reset and wait
+ * for the EEPROM load to complete.
+ ******************************************************************/
+void ether_init (void)
+{
+#ifdef CONFIG_DRIVER_LAN91C96
+ int cnt = 20;
+
+ __raw_writew(0x0, LAN_RESET_REGISTER);
+ do {
+ __raw_writew(0x1, LAN_RESET_REGISTER);
+ udelay (100);
+ if (cnt == 0)
+ goto h4reset_err_out;
+ --cnt;
+ } while (__raw_readw(LAN_RESET_REGISTER) != 0x1);
+
+ cnt = 20;
+
+ do {
+ __raw_writew(0x0, LAN_RESET_REGISTER);
+ udelay (100);
+ if (cnt == 0)
+ goto h4reset_err_out;
+ --cnt;
+ } while (__raw_readw(LAN_RESET_REGISTER) != 0x0000);
+ udelay (1000);
+
+ *((volatile unsigned char *) ETH_CONTROL_REG) &= ~0x01;
+ udelay (1000);
+
+ h4reset_err_out:
+ return;
+#endif
+}
+
+/**********************************************
+ * Routine: dram_init
+ * Description: sets uboots idea of sdram size
+ **********************************************/
+int dram_init (void)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+ unsigned int size0=0,size1=0;
+ u32 mtype, btype;
+#define NOT_EARLY 0
+
+ i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE); /* need this a bit early */
+
+ btype = get_board_type();
+ mtype = get_mem_type();
+
+ display_board_info(btype);
+ if (btype == BOARD_H4_MENELAUS)
+ update_mux(btype,mtype);
+
+ if ((mtype == DDR_COMBO) || (mtype == DDR_STACKED)) {
+ do_sdrc_init(SDRC_CS1_OSET, NOT_EARLY); /* init other chip select */
+ size0 = size1 = SZ_32M;
+ } else
+ size0 = SZ_64M;
+
+ gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+ gd->bd->bi_dram[0].size = size0;
+ gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
+ gd->bd->bi_dram[1].size = size1;
+
+ return 0;
+}
+
+/**********************************************************
+ * Routine: set_muxconf_regs
+ * Description: Setting up the configuration Mux registers
+ * specific to the hardware
+ *********************************************************/
+void set_muxconf_regs (void)
+{
+ muxSetupSDRC();
+ muxSetupGPMC();
+ muxSetupUsb0();
+ muxSetupUart3();
+ muxSetupI2C1();
+ muxSetupUART1();
+ muxSetupLCD();
+ muxSetupCamera();
+ muxSetupMMCSD();
+ muxSetupTouchScreen();
+ muxSetupHDQ();
+}
+
+/*****************************************************************
+ * Routine: peripheral_enable
+ * Description: Enable the clks & power for perifs (GPT2, UART1,...)
+ ******************************************************************/
+void peripheral_enable(void)
+{
+ unsigned int v, if_clks=0, func_clks=0;
+
+ /* Enable GP2 timer.*/
+ if_clks |= BIT4;
+ func_clks |= BIT4;
+ v = __raw_readl(CM_CLKSEL2_CORE) | 0x4; /* Sys_clk input OMAP2420_GPT2 */
+ __raw_writel(v, CM_CLKSEL2_CORE);
+ __raw_writel(0x1, CM_CLKSEL_WKUP);
+
+#ifdef CFG_NS16550
+ /* Enable UART1 clock */
+ func_clks |= BIT21;
+ if_clks |= BIT21;
+#endif
+ v = __raw_readl(CM_ICLKEN1_CORE) | if_clks; /* Interface clocks on */
+ __raw_writel(v,CM_ICLKEN1_CORE );
+ v = __raw_readl(CM_FCLKEN1_CORE) | func_clks; /* Functional Clocks on */
+ __raw_writel(v, CM_FCLKEN1_CORE);
+ delay(1000);
+
+#ifndef KERNEL_UPDATED
+ {
+#define V1 0xffffffff
+#define V2 0x00000007
+
+ __raw_writel(V1, CM_FCLKEN1_CORE);
+ __raw_writel(V2, CM_FCLKEN2_CORE);
+ __raw_writel(V1, CM_ICLKEN1_CORE);
+ __raw_writel(V1, CM_ICLKEN2_CORE);
+ }
+#endif
+}
+
+/****************************************
+ * Routine: muxSetupUsb0 (ostboot)
+ * Description: Setup usb muxing
+ *****************************************/
+void muxSetupUsb0(void)
+{
+ volatile uint8 *MuxConfigReg;
+ volatile uint32 *otgCtrlReg;
+
+ MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_USB0_PUEN;
+ *MuxConfigReg &= (uint8)(~0x1F);
+
+ MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_USB0_VP;
+ *MuxConfigReg &= (uint8)(~0x1F);
+
+ MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_USB0_VM;
+ *MuxConfigReg &= (uint8)(~0x1F);
+
+ MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_USB0_RCV;
+ *MuxConfigReg &= (uint8)(~0x1F);
+
+ MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_USB0_TXEN;
+ *MuxConfigReg &= (uint8)(~0x1F);
+
+ MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_USB0_SE0;
+ *MuxConfigReg &= (uint8)(~0x1F);
+
+ MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_USB0_DAT;
+ *MuxConfigReg &= (uint8)(~0x1F);
+
+ /* setup for USB VBus detection */
+ otgCtrlReg = (volatile uint32 *)USB_OTG_CTRL;
+ *otgCtrlReg |= 0x00040000; /* bit 18 */
+}
+
+/****************************************
+ * Routine: muxSetupUart3 (ostboot)
+ * Description: Setup uart3 muxing
+ *****************************************/
+void muxSetupUart3(void)
+{
+ volatile uint8 *MuxConfigReg;
+
+ MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_UART3_TX_IRTX;
+ *MuxConfigReg &= (uint8)(~0x1F);
+
+ MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_UART3_RX_IRRX;
+ *MuxConfigReg &= (uint8)(~0x1F);
+}
+
+/****************************************
+ * Routine: muxSetupI2C1 (ostboot)
+ * Description: Setup i2c muxing
+ *****************************************/
+void muxSetupI2C1(void)
+{
+ volatile unsigned char *MuxConfigReg;
+
+ /* I2C1 Clock pin configuration, PIN = M19 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_I2C1_SCL;
+ *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+ /* I2C1 Data pin configuration, PIN = L15 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_I2C1_SDA;
+ *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+ /* Pull-up required on data line */
+ /* external pull-up already present. */
+ /* *MuxConfigReg |= 0x18 ;*/ /* Mode = 0, PullTypeSel=PU, PullUDEnable=Enabled */
+}
+
+/****************************************
+ * Routine: muxSetupUART1 (ostboot)
+ * Description: Set up uart1 muxing
+ *****************************************/
+void muxSetupUART1(void)
+{
+ volatile unsigned char *MuxConfigReg;
+
+ /* UART1_CTS pin configuration, PIN = D21 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_UART1_CTS;
+ *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
+
+ /* UART1_RTS pin configuration, PIN = H21 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_UART1_RTS;
+ *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
+
+ /* UART1_TX pin configuration, PIN = L20 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_UART1_TX;
+ *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
+
+ /* UART1_RX pin configuration, PIN = T21 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_UART1_RX;
+ *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
+}
+
+/****************************************
+ * Routine: muxSetupLCD (ostboot)
+ * Description: Setup lcd muxing
+ *****************************************/
+void muxSetupLCD(void)
+{
+ volatile unsigned char *MuxConfigReg;
+
+ /* LCD_D0 pin configuration, PIN = Y7 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D0;
+ *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+ /* LCD_D1 pin configuration, PIN = P10 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D1;
+ *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+ /* LCD_D2 pin configuration, PIN = V8 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D2;
+ *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+ /* LCD_D3 pin configuration, PIN = Y8 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D3;
+ *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+ /* LCD_D4 pin configuration, PIN = W8 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D4;
+ *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+ /* LCD_D5 pin configuration, PIN = R10 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D5;
+ *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+ /* LCD_D6 pin configuration, PIN = Y9 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D6;
+ *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+ /* LCD_D7 pin configuration, PIN = V9 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D7;
+ *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+ /* LCD_D8 pin configuration, PIN = W9 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D8;
+ *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+ /* LCD_D9 pin configuration, PIN = P11 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D9;
+ *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+ /* LCD_D10 pin configuration, PIN = V10 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D10;
+ *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+ /* LCD_D11 pin configuration, PIN = Y10 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D11;
+ *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+ /* LCD_D12 pin configuration, PIN = W10 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D12;
+ *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+ /* LCD_D13 pin configuration, PIN = R11 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D13;
+ *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+ /* LCD_D14 pin configuration, PIN = V11 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D14;
+ *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+ /* LCD_D15 pin configuration, PIN = W11 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D15;
+ *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+ /* LCD_D16 pin configuration, PIN = P12 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D16;
+ *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+ /* LCD_D17 pin configuration, PIN = R12 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D17;
+ *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+ /* LCD_PCLK pin configuration, PIN = W6 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_PCLK;
+ *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+ /* LCD_VSYNC pin configuration, PIN = V7 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_VSYNC;
+ *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+ /* LCD_HSYNC pin configuration, PIN = Y6 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_HSYNC;
+ *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+ /* LCD_ACBIAS pin configuration, PIN = W7 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_ACBIAS;
+ *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+}
+
+/****************************************
+ * Routine: muxSetupCamera (ostboot)
+ * Description: Setup camera muxing
+ *****************************************/
+void muxSetupCamera(void)
+{
+ volatile unsigned char *MuxConfigReg;
+
+ /* CAMERA_RSTZ pin configuration, PIN = Y16 */
+ /* CAM_RST is connected through the I2C IO expander.*/
+ /* MuxConfigReg = (volatile unsigned char *), CONTROL_PADCONF_SYS_NRESWARM*/
+ /* *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled */
+
+ /* CAMERA_XCLK pin configuration, PIN = U3 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_XCLK;
+ *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+ /* CAMERA_LCLK pin configuration, PIN = V5 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_LCLK;
+ *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+ /* CAMERA_VSYNC pin configuration, PIN = U2 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_VS,
+ *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+ /* CAMERA_HSYNC pin configuration, PIN = T3 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_HS,
+ *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+ /* CAMERA_DAT0 pin configuration, PIN = T4 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_D0,
+ *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+ /* CAMERA_DAT1 pin configuration, PIN = V2 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_D1,
+ *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+ /* CAMERA_DAT2 pin configuration, PIN = V3 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_D2,
+ *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+ /* CAMERA_DAT3 pin configuration, PIN = U4 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_D3,
+ *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+ /* CAMERA_DAT4 pin configuration, PIN = W2 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_D4,
+ *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+ /* CAMERA_DAT5 pin configuration, PIN = V4 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_D5,
+ *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+ /* CAMERA_DAT6 pin configuration, PIN = W3 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_D6,
+ *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+ /* CAMERA_DAT7 pin configuration, PIN = Y2 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_D7,
+ *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+ /* CAMERA_DAT8 pin configuration, PIN = Y4 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_D8,
+ *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+ /* CAMERA_DAT9 pin configuration, PIN = V6 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_D9,
+ *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+}
+
+/****************************************
+ * Routine: muxSetupMMCSD (ostboot)
+ * Description: set up MMC muxing
+ *****************************************/
+void muxSetupMMCSD(void)
+{
+ volatile unsigned char *MuxConfigReg;
+
+ /* SDMMC_CLKI pin configuration, PIN = H15 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_CLKI,
+ *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+ /* SDMMC_CLKO pin configuration, PIN = G19 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_CLKO,
+ *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+ /* SDMMC_CMD pin configuration, PIN = H18 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_CMD,
+ *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+ // External pull-ups are present.
+ // *MuxConfigReg |= 0x18 ; // PullUDEnable=Enabled, PullTypeSel=PU
+
+ /* SDMMC_DAT0 pin configuration, PIN = F20 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_DAT0,
+ *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+ // External pull-ups are present.
+ // *MuxConfigReg |= 0x18 ; // PullUDEnable=Enabled, PullTypeSel=PU
+
+ /* SDMMC_DAT1 pin configuration, PIN = H14 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_DAT1,
+ *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+ // External pull-ups are present.
+ // *MuxConfigReg |= 0x18 ; // PullUDEnable=Enabled, PullTypeSel=PU
+
+ /* SDMMC_DAT2 pin configuration, PIN = E19 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_DAT2,
+ *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+ // External pull-ups are present.
+ // *MuxConfigReg |= 0x18 ; // PullUDEnable=Enabled, PullTypeSel=PU
+
+ /* SDMMC_DAT3 pin configuration, PIN = D19 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_DAT3,
+ *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+ // External pull-ups are present.
+ // *MuxConfigReg |= 0x18 ; // PullUDEnable=Enabled, PullTypeSel=PU
+
+ /* SDMMC_DDIR0 pin configuration, PIN = F19 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_DAT_DIR0,
+ *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+ /* SDMMC_DDIR1 pin configuration, PIN = E20 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_DAT_DIR1,
+ *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+ /* SDMMC_DDIR2 pin configuration, PIN = F18 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_DAT_DIR2,
+ *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+ /* SDMMC_DDIR3 pin configuration, PIN = E18 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_DAT_DIR3,
+ *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+ /* SDMMC_CDIR pin configuration, PIN = G18 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_CMD_DIR,
+ *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+ /* MMC_CD pin configuration, PIN = B3 ---2420IP ONLY---*/
+ /* MMC_CD for 2422IP=K1 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_SDRC_A14,
+ *MuxConfigReg = 0x03 ; // Mode = 3, PUPD=Disabled
+
+ /* MMC_WP pin configuration, PIN = B4 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_SDRC_A13,
+ *MuxConfigReg = 0x03 ; // Mode = 3, PUPD=Disabled
+}
+
+/******************************************
+ * Routine: muxSetupTouchScreen (ostboot)
+ * Description: Set up touch screen muxing
+ *******************************************/
+void muxSetupTouchScreen(void)
+{
+ volatile unsigned char *MuxConfigReg;
+
+ /* SPI1_CLK pin configuration, PIN = U18 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_SPI1_CLK,
+ *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+ /* SPI1_MOSI pin configuration, PIN = V20 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_SPI1_SIMO,
+ *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+ /* SPI1_MISO pin configuration, PIN = T18 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_SPI1_SOMI,
+ *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+ /* SPI1_nCS0 pin configuration, PIN = U19 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_SPI1_NCS0,
+ *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+ /* PEN_IRQ pin configuration, PIN = P20 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MCBSP1_FSR,
+ *MuxConfigReg = 0x03 ; // Mode = 3, PUPD=Disabled
+}
+
+/****************************************
+ * Routine: muxSetupHDQ (ostboot)
+ * Description: setup 1wire mux
+ *****************************************/
+void muxSetupHDQ(void)
+{
+ volatile unsigned char *MuxConfigReg;
+
+ /* HDQ_SIO pin configuration, PIN = N18 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_HDQ_SIO,
+ *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+}
+
+/***************************************************************
+ * Routine: muxSetupGPMC (ostboot)
+ * Description: Configures balls which cam up in protected mode
+ ***************************************************************/
+void muxSetupGPMC(void)
+{
+ volatile uint8 *MuxConfigReg;
+ volatile unsigned int *MCR = 0x4800008C;
+
+ /* gpmc_io_dir */
+ *MCR = 0x19000000;
+
+ /* NOR FLASH CS0 */
+ /* signal - Gpmc_clk; pin - J4; offset - 0x0088; mode - 0; Byte-3 Pull/up - N/A */
+ MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_GPMC_D2_BYTE3,
+ *MuxConfigReg = 0x00 ;
+
+ /* signal - Gpmc_iodir; pin - n2; offset - 0x008C; mode - 1; Byte-3 Pull/up - N/A */
+ MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_GPMC_NCS0_BYTE3,
+ *MuxConfigReg = 0x01 ;
+
+ /* MPDB(Multi Port Debug Port) CS1 */
+ /* signal - gpmc_ncs1; pin - N8; offset - 0x008C; mode - 0; Byte-1 Pull/up - N/A */
+ MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_GPMC_NCS0_BYTE1,
+ *MuxConfigReg = 0x00 ;
+
+ /* signal - Gpmc_ncs2; pin - E2; offset - 0x008C; mode - 0; Byte-2 Pull/up - N/A */
+ MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_GPMC_NCS0_BYTE2,
+ *MuxConfigReg = 0x00 ;
+
+
+}
+
+/****************************************************************
+ * Routine: muxSetupSDRC (ostboot)
+ * Description: Configures balls which come up in protected mode
+ ****************************************************************/
+void muxSetupSDRC(void)
+{
+ volatile uint8 *MuxConfigReg;
+
+ /* signal - sdrc_ncs1; pin - C12; offset - 0x00A0; mode - 0; Byte-1 Pull/up - N/A */
+ MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_SDRC_NCS0_BYTE1,
+ *MuxConfigReg = 0x00 ;
+
+ /* signal - sdrc_a12; pin - D11; offset - 0x0030; mode - 0; Byte-2 Pull/up - N/A */
+ MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_SDRC_A14_BYTE2,
+ *MuxConfigReg = 0x00 ;
+
+ /* signal - sdrc_cke1; pin - B13; offset - 0x00A0; mode - 0; Byte-3 Pull/up - N/A */
+ MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_SDRC_NCS0_BYTE3,
+ *MuxConfigReg = 0x00;
+
+ if (get_cpu_type() == CPU_2422) {
+ MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_SDRC_A14_BYTE0,
+ *MuxConfigReg = 0x1b;
+ }
+}
+
+/*****************************************************************************
+ * Routine: update_mux()
+ * Description: Update balls which are different beween boards. All should be
+ * updated to match functionaly. However, I'm only updating ones
+ * which I'll be using for now. When power comes into play they
+ * all need updating.
+ *****************************************************************************/
+void update_mux(u32 btype,u32 mtype)
+{
+ u32 cpu, base = OMAP2420_CTRL_BASE;
+ cpu = get_cpu_type();
+
+ if (btype == BOARD_H4_MENELAUS) {
+ if (cpu == CPU_2420) {
+ /* PIN = B3, GPIO.0->KBR5, mode 3, (pun?),-DO-*/
+ __raw_writeb(0x3, base+0x30);
+ /* PIN = B13, GPIO.38->KBC6, mode 3, (pun?)-DO-*/
+ __raw_writeb(0x3, base+0xa3);
+ /* PIN = F1, GPIO.25->HSUSBxx mode 3, (for external HS USB)*/
+ /* PIN = H1, GPIO.26->HSUSBxx mode 3, (for external HS USB)*/
+ /* PIN = K1, GPMC_ncs6 mode 0, (on board nand access)*/
+ /* PIN = L2, GPMC_ncs67 mode 0, (for external HS USB)*/
+ /* PIN = M1 (HSUSBOTG) */
+ /* PIN = P1, GPIO.35->MEN_POK mode 3, (menelaus powerok)-DO-*/
+ __raw_writeb(0x3, base+0x9d);
+ /* PIN = U32, (WLAN_CLKREQ) */
+ /* PIN = Y11, WLAN */
+ /* PIN = AA4, GPIO.15->KBC2, mode 3, -DO- */
+ __raw_writeb(0x3, base+0xe7);
+ /* PIN = AA8, mDOC */
+ /* PIN = AA10, BT */
+ /* PIN = AA13, WLAN */
+ /* PIN = M18 GPIO.96->MMC2_WP mode 3 -DO- */
+ __raw_writeb(0x3, base+0x10e);
+ /* PIN = N19 GPIO.98->WLAN_INT mode 3 -DO- */
+ __raw_writeb(0x3, base+0x110);
+ /* PIN = J15 HHUSB */
+ /* PIN = H19 HSUSB */
+ /* PIN = W13, P13, R13, W16 ... */
+ /* PIN = V12 GPIO.25->I2C_CAMEN mode 3 -DO- */
+ __raw_writeb(0x3, base+0xde);
+ /* PIN = W19 sys_nirq->MENELAUS_INT mode 0 -DO- */
+ __raw_writeb(0x0, base+0x12c);
+ /* PIN = AA17->sys_clkreq mode 0 -DO- */
+ __raw_writeb(0x0, base+0x136);
+ } else if (cpu == CPU_2422) {
+ /* PIN = B3, GPIO.0->nc, mode 3, set above (pun?)*/
+ /* PIN = B13, GPIO.cke1->nc, mode 0, set above, (pun?)*/
+ /* PIN = F1, GPIO.25->HSUSBxx mode 3, (for external HS USB)*/
+ /* PIN = H1, GPIO.26->HSUSBxx mode 3, (for external HS USB)*/
+ /* PIN = K1, GPMC_ncs6 mode 0, (on board nand access)*/
+ __raw_writeb(0x0, base+0x92);
+ /* PIN = L2, GPMC_ncs67 mode 0, (for external HS USB)*/
+ /* PIN = M1 (HSUSBOTG) */
+ /* PIN = P1, GPIO.35->MEN_POK mode 3, (menelaus powerok)-DO-*/
+ __raw_writeb(0x3, base+0x10c);
+ /* PIN = U32, (WLAN_CLKREQ) */
+ /* PIN = AA4, GPIO.15->KBC2, mode 3, -DO- */
+ __raw_writeb(0x3, base+0x30);
+ /* PIN = AA8, mDOC */
+ /* PIN = AA10, BT */
+ /* PIN = AA12, WLAN */
+ /* PIN = M18 GPIO.96->MMC2_WP mode 3 -DO- */
+ __raw_writeb(0x3, base+0x10e);
+ /* PIN = N19 GPIO.98->WLAN_INT mode 3 -DO- */
+ __raw_writeb(0x3, base+0x110);
+ /* PIN = J15 HHUSB */
+ /* PIN = H19 HSUSB */
+ /* PIN = W13, P13, R13, W16 ... */
+ /* PIN = V12 GPIO.25->I2C_CAMEN mode 3 -DO- */
+ __raw_writeb(0x3, base+0xde);
+ /* PIN = W19 sys_nirq->MENELAUS_INT mode 0 -DO- */
+ __raw_writeb(0x0, base+0x12c);
+ /* PIN = AA17->sys_clkreq mode 0 -DO- */
+ __raw_writeb(0x0, base+0x136);
+ }
+
+ } else if (btype == BOARD_H4_SDP) {
+ if (cpu == CPU_2420) {
+ /* PIN = B3, GPIO.0->nc mode 3, set above (pun?)*/
+ /* PIN = B13, GPIO.cke1->nc, mode 0, set above, (pun?)*/
+ /* Pin = Y11 VLNQ */
+ /* Pin = AA4 VLNQ */
+ /* Pin = AA6 VLNQ */
+ /* Pin = AA8 VLNQ */
+ /* Pin = AA10 VLNQ */
+ /* Pin = AA12 VLNQ */
+ /* PIN = M18 GPIO.96->KBR5 mode 3 -DO- */
+ __raw_writeb(0x3, base+0x10e);
+ /* PIN = N19 GPIO.98->KBC6 mode 3 -DO- */
+ __raw_writeb(0x3, base+0x110);
+ /* PIN = J15 MDOC_nDMAREQ */
+ /* PIN = H19 GPIO.100->KBC2 mode 3 -DO- */
+ __raw_writeb(0x3, base+0x114);
+ /* PIN = W13, V12, P13, R13, W19, W16 ... */
+ /* PIN = AA17 sys_clkreq->bt_clk_req mode 0 */
+ } else if (cpu == CPU_2422) {
+ /* PIN = B3, GPIO.0->MMC_CD, mode 3, set above */
+ /* PIN = B13, GPIO.38->wlan_int, mode 3, (pun?)*/
+ /* Pin = Y11 VLNQ */
+ /* Pin = AA4 VLNQ */
+ /* Pin = AA6 VLNQ */
+ /* Pin = AA8 VLNQ */
+ /* Pin = AA10 VLNQ */
+ /* Pin = AA12 VLNQ */
+ /* PIN = M18 GPIO.96->KBR5 mode 3 -DO- */
+ __raw_writeb(0x3, base+0x10e);
+ /* PIN = N19 GPIO.98->KBC6 mode 3 -DO- */
+ __raw_writeb(0x3, base+0x110);
+ /* PIN = J15 MDOC_nDMAREQ */
+ /* PIN = H19 GPIO.100->KBC2 mode 3 -DO- */
+ __raw_writeb(0x3, base+0x114);
+ /* PIN = W13, V12, P13, R13, W19, W16 ... */
+ /* PIN = AA17 sys_clkreq->bt_clk_req mode 0 */
+ }
+ }
+}
+
+
--- /dev/null
+/*
+ * Board specific setup info
+ *
+ * (C) Copyright 2004
+ * Texas Instruments, <www.ti.com>
+ * Richard Woodruff <r-woodruff2@ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <version.h>
+#include <asm/arch/omap2420.h>
+#include <asm/arch/mem.h>
+#include <asm/arch/clocks.h>
+
+_TEXT_BASE:
+ .word TEXT_BASE /* sdram load addr from config.mk */
+
+#ifdef CONFIG_PARTIAL_SRAM
+
+/**************************************************************************
+ * cpy_clk_code: relocates clock code into SRAM where its safer to execute
+ * R1 = SRAM destination address.
+ *************************************************************************/
+.global cpy_clk_code
+ cpy_clk_code:
+ /* Copy DPLL code into SRAM */
+ adr r0, go_to_speed /* get addr of clock setting code */
+ mov r2, #384 /* r2 size to copy (div by 32 bytes) */
+ mov r1, r1 /* r1 <- dest address (passed in) */
+ add r2, r2, r0 /* r2 <- source end address */
+next2:
+ ldmia r0!, {r3-r10} /* copy from source address [r0] */
+ stmia r1!, {r3-r10} /* copy to target address [r1] */
+ cmp r0, r2 /* until source end address [r2] */
+ bne next2
+ mov pc, lr /* back to caller */
+
+/* ****************************************************************************
+ * go_to_speed: -Moves to bypass, -Commits clock dividers, -puts dpll at speed
+ * -executed from SRAM.
+ * R0 = PRCM_CLKCFG_CTRL - addr of valid reg
+ * R1 = CM_CLKEN_PLL - addr dpll ctlr reg
+ * R2 = dpll value
+ * R3 = CM_IDLEST_CKGEN - addr dpll lock wait
+ ******************************************************************************/
+.global go_to_speed
+ go_to_speed:
+ sub sp, sp, #0x4 /* get some stack space */
+ str r4, [sp] /* save r4's value */
+
+ /* move into fast relock bypass */
+ ldr r8, pll_ctl_add
+ mov r4, #0x2
+ str r4, [r8]
+ ldr r4, pll_stat
+block:
+ ldr r8, [r4] /* wait for bypass to take effect */
+ and r8, r8, #0x3
+ cmp r8, #0x1
+ bne block
+
+ /* set new dpll dividers _after_ in bypass */
+ ldr r4, pll_div_add
+ ldr r8, pll_div_val
+ str r8, [r4]
+
+ /* now prepare GPMC (flash) for new dpll speed */
+ /* flash needs to be stable when we jump back to it */
+ ldr r4, cfg3_0_addr
+ ldr r8, cfg3_0_val
+ str r8, [r4]
+ ldr r4, cfg4_0_addr
+ ldr r8, cfg4_0_val
+ str r8, [r4]
+ ldr r4, cfg1_0_addr
+ ldr r8, [r4]
+ orr r8, r8, #0x3 /* up gpmc divider */
+ str r8, [r4]
+
+ /* setup to 2x loop though code. The first loop pre-loads the
+ * icache, the 2nd commits the prcm config, and locks the dpll
+ */
+ mov r4, #0x1000 /* spin spin spin */
+ mov r8, #0x4 /* first pass condition & set registers */
+ cmp r8, #0x4
+2:
+ ldrne r8, [r3] /* DPLL lock check */
+ and r8, r8, #0x7
+ cmp r8, #0x2
+ beq 4f
+3:
+ subeq r8, r8, #0x1
+ streq r8, [r0] /* commit dividers (2nd time) */
+ nop
+lloop1:
+ sub r4, r4, #0x1 /* Loop currently necessary else bad jumps */
+ nop
+ cmp r4, #0x0
+ bne lloop1
+ mov r4, #0x40000
+ cmp r8, #0x1
+ nop
+ streq r2, [r1] /* lock dpll (2nd time) */
+ nop
+lloop2:
+ sub r4, r4, #0x1 /* loop currently necessary else bad jumps */
+ nop
+ cmp r4, #0x0
+ bne lloop2
+ mov r4, #0x40000
+ cmp r8, #0x1
+ nop
+ ldreq r8, [r3] /* get lock condition for dpll */
+ cmp r8, #0x4 /* first time though? */
+ bne 2b
+ moveq r8, #0x2 /* set to dpll check condition. */
+ beq 3b /* if condition not true branch */
+4:
+ ldr r4, [sp]
+ add sp, sp, #0x4 /* return stack space */
+ mov pc, lr /* back to caller, locked */
+
+_go_to_speed: .word go_to_speed
+
+/* these constants need to be close for PIC code */
+cfg3_0_addr:
+ .word GPMC_CONFIG3_0
+cfg3_0_val:
+ .word H4_24XX_GPMC_CONFIG3_0
+cfg4_0_addr:
+ .word GPMC_CONFIG4_0
+cfg4_0_val:
+ .word H4_24XX_GPMC_CONFIG4_0
+cfg1_0_addr:
+ .word GPMC_CONFIG1_0
+pll_ctl_add:
+ .word CM_CLKEN_PLL
+pll_stat:
+ .word CM_IDLEST_CKGEN
+pll_div_add:
+ .word CM_CLKSEL1_PLL
+pll_div_val:
+ .word DPLL_VAL /* DPLL setting (300MHz default) */
+#endif
+
+.globl platformsetup
+platformsetup:
+ mov r3, r0 /* save skip information */
+#ifdef CONFIG_APTIX
+ ldr r0, REG_SDRC_MCFG_0
+ ldr r1, VAL_SDRC_MCFG_0
+ str r1, [r0]
+ ldr r0, REG_SDRC_MR_0
+ ldr r1, VAL_SDRC_MR_0
+ str r1, [r0]
+ /* a ddr needs emr1 set here */
+ ldr r0, REG_SDRC_SHARING
+ ldr r1, VAL_SDRC_SHARING
+ str r1, [r0]
+ ldr r0, REG_SDRC_RFR_CTRL_0
+ ldr r1, VAL_SDRC_RFR_CTRL_0
+ str r1, [r0]
+
+ /* little delay after init */
+ mov r2, #0x1800
+1:
+ subs r2, r2, #0x1
+ bne 1b
+#endif
+#ifdef CONFIG_PARTIAL_SRAM
+ ldr sp, SRAM_STACK
+ str ip, [sp] /* stash old link register */
+ mov ip, lr /* save link reg across call */
+ mov r0, r3 /* pass skip info to s_init */
+ bl s_init /* go setup pll,mux,memory */
+ ldr ip, [sp] /* restore save ip */
+ mov lr, ip /* restore link reg */
+#endif
+ /* map interrupt controller */
+ ldr r0, VAL_INTH_SETUP
+ mcr p15, 0, r0, c15, c2, 4
+
+ /* back to arch calling code */
+ mov pc, lr
+
+ /* the literal pools origin */
+ .ltorg
+
+REG_CONTROL_STATUS:
+ .word CONTROL_STATUS
+VAL_INTH_SETUP:
+ .word PERIFERAL_PORT_BASE
+SRAM_STACK:
+ .word LOW_LEVEL_SRAM_STACK
+
+#ifdef CONFIG_APTIX
+REG_SDRC_SHARING:
+ .word SDRC_SHARING
+REG_SDRC_MCFG_0:
+ .word SDRC_MCFG_0
+REG_SDRC_MR_0:
+ .word SDRC_MR_0
+REG_SDRC_RFR_CTRL_0:
+ .word SDRC_RFR_CTRL
+VAL_SDRC_SHARING:
+ .word VAL_H4_SDRC_SHARING
+VAL_SDRC_MCFG_0:
+ .word VAL_H4_SDRC_MCFG_0
+VAL_SDRC_MR_0:
+ .word VAL_H4_SDRC_MR_0
+VAL_SDRC_RFR_CTRL_0:
+ .word VAL_H4_SDRC_RFR_CTRL_0
+#endif
+
+
+
+
+
+
--- /dev/null
+/*
+ * (C) Copyright 2004
+ * Texas Instruments, <www.ti.com>
+ * Richard Woodruff <r-woodruff2@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/omap2420.h>
+#include <asm/io.h>
+#include <asm/arch/bits.h>
+#include <asm/arch/mem.h> /* get mem tables */
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/sys_info.h>
+#include <i2c.h>
+
+/**************************************************************************
+ * get_cpu_type() - low level get cpu type
+ * - no C globals yet.
+ * - just looking to say if this is a 2422 or 2420 or ...
+ * - to start with we will look at switch settings..
+ * - 2422 id's same as 2420 for ES1 will rely on H4 board characteristics
+ * (mux for 2420, non-mux for 2422).
+ ***************************************************************************/
+u32 get_cpu_type(void)
+{
+ u32 v;
+
+ v = __raw_readl(TAP_IDCODE_REG);
+ v &= CPU_24XX_ID_MASK;
+ if (v == CPU_2420_CHIPID) { /* currently 2420 and 2422 have same id */
+ if (is_gpmc_muxed() == GPMC_MUXED) /* if mux'ed */
+ return(CPU_2420);
+ else
+ return(CPU_2422);
+ } else
+ return(CPU_2420); /* don't know, say 2420 */
+}
+
+/******************************************
+ * get_cpu_rev(void) - extract version info
+ ******************************************/
+u32 get_cpu_rev(void)
+{
+ u32 v;
+ v = __raw_readl(TAP_IDCODE_REG);
+ v = v >> 28;
+ return(v+1); /* currently 2422 and 2420 match up */
+}
+
+/***********************************************************
+ * get_mem_type() - identify type of mDDR part used.
+ * 2422 uses stacked DDR, 2 parts CS0/CS1.
+ * 2420 may have 1 or 2, no good way to know...only init 1...
+ * when eeprom data is up we can select 1 more.
+ *************************************************************/
+u32 get_mem_type(void)
+{
+ if (get_cpu_type() == CPU_2422)
+ return(DDR_STACKED);
+
+ if (get_board_type() == BOARD_H4_MENELAUS)
+ return(DDR_COMBO);
+ else
+ return(DDR_DISCRETE);
+}
+
+/***********************************************************************
+ * get_board_type() - get board type based on current production stats.
+ * --- NOTE: 2 I2C EEPROMs will someday be populated with proper info.
+ * when they are available we can get info from there. This should
+ * be correct of all known boards up until today.
+ ************************************************************************/
+u32 get_board_type(void)
+{
+ if (i2c_probe(I2C_MENELAUS) == 0)
+ return(BOARD_H4_MENELAUS);
+ else
+ return(BOARD_H4_SDP);
+}
+
+/******************************************************************
+ * get_sysboot_value() - get init word settings (dip switch on h4)
+ ******************************************************************/
+u32 get_sysboot_value(void)
+{
+ return(0x00000FFF & __raw_readl(CONTROL_STATUS));
+}
+
+/***************************************************************************
+ * get_gpmc0_base() - Return current address hardware will be
+ * fetching from. The below effectively gives what is correct, its a bit
+ * mis-leading compared to the TRM. For the most general case the mask
+ * needs to be also taken into account this does work in practice.
+ * - for u-boot we currently map:
+ * -- 0 to nothing,
+ * -- 4 to flash
+ * -- 8 to enent
+ * -- c to wifi
+ ****************************************************************************/
+u32 get_gpmc0_base(void)
+{
+ u32 b;
+
+ b = __raw_readl(GPMC_CONFIG7_0);
+ b &= 0x1F; /* keep base [5:0] */
+ b = b << 24; /* ret 0x0b000000 */
+ return(b);
+}
+
+/*****************************************************************
+ * is_gpmc_muxed() - tells if address/data lines are multiplexed
+ *****************************************************************/
+u32 is_gpmc_muxed(void)
+{
+ u32 mux;
+ mux = get_sysboot_value();
+ if (mux & BIT1) /* if mux'ed */
+ return(GPMC_MUXED);
+ else
+ return(GPMC_NONMUXED);
+}
+
+/************************************************************************
+ * get_gpmc0_type() - read sysboot lines to see type of memory attached
+ ************************************************************************/
+u32 get_gpmc0_type(void)
+{
+ u32 type;
+ type = get_sysboot_value();
+ if ((type & (BIT3|BIT2)) == (BIT3|BIT2))
+ return(TYPE_NAND);
+ else
+ return(TYPE_NOR);
+}
+
+/*******************************************************************
+ * get_gpmc0_width() - See if bus is in x8 or x16 (mainly for nand)
+ *******************************************************************/
+u32 get_gpmc0_width(void)
+{
+ u32 width;
+ width = get_sysboot_value();
+ if ((width & 0xF) == (BIT3|BIT2))
+ return(WIDTH_8BIT);
+ else
+ return(WIDTH_16BIT);
+}
+
+/*********************************************************************
+ * wait_on_value() - common routine to allow waiting for changes in
+ * volatile regs.
+ *********************************************************************/
+u32 wait_on_value(u32 read_bit_mask, u32 match_value, u32 read_addr, u32 bound)
+{
+ u32 i = 0, val;
+ do {
+ ++i;
+ val = __raw_readl(read_addr) & read_bit_mask;
+ if (val == match_value)
+ return(1);
+ if (i==bound)
+ return(0);
+ } while (1);
+}
+
+/*********************************************************************
+ * display_board_info() - print banner with board info.
+ *********************************************************************/
+void display_board_info(u32 btype)
+{
+ char cpu_2420[] = "2420";
+ char cpu_2422[] = "2422";
+ char db_men[] = "Menelaus";
+ char db_ip[]= "IP";
+ char *cpu_s, *db_s;
+ u32 cpu = get_cpu_type();
+
+ if(cpu == CPU_2420)
+ cpu_s = cpu_2420;
+ else
+ cpu_s = cpu_2422;
+ if(btype == BOARD_H4_MENELAUS)
+ db_s = db_men;
+ else
+ db_s = db_ip;
+ printf("TI H4 SDP Base Board with OMAP%s %s Daughter Board\n",cpu_s, db_s);
+}
--- /dev/null
+/*
+ * January 2004 - Changed to support H4 device
+ * Copyright (c) 2004 Texas Instruments
+ *
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SECTIONS
+{
+ . = 0x00000000;
+
+ . = ALIGN(4);
+ .text :
+ {
+ cpu/arm1136/start.o (.text)
+ *(.text)
+ }
+
+ . = ALIGN(4);
+ .rodata : { *(.rodata) }
+
+ . = ALIGN(4);
+ .data : { *(.data) }
+
+ . = ALIGN(4);
+ .got : { *(.got) }
+
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ __bss_start = .;
+ .bss : { *(.bss) }
+ _end = .;
+}
int env_init(void)
{
DECLARE_GLOBAL_DATA_PTR;
-
- int crc1_ok =
- (crc32(0, flash_addr->data, ENV_SIZE) == flash_addr->crc);
- int crc2_ok =
- (crc32(0, flash_addr_new->data, ENV_SIZE) == flash_addr_new->crc);
+ int crc1_ok = 0, crc2_ok = 0;
uchar flag1 = flash_addr->flags;
uchar flag2 = flash_addr_new->flags;
ulong addr1 = (ulong)&(flash_addr->data);
ulong addr2 = (ulong)&(flash_addr_new->data);
+#ifdef CONFIG_OMAP2420H4
+ int flash_probe(void);
+
+ if(flash_probe() == 0)
+ goto bad_flash;
+#endif
+
+ crc1_ok = (crc32(0, flash_addr->data, ENV_SIZE) == flash_addr->crc);
+ crc2_ok = (crc32(0, flash_addr_new->data, ENV_SIZE) == flash_addr_new->crc);
+
if (crc1_ok && ! crc2_ok) {
gd->env_addr = addr1;
gd->env_valid = 1;
gd->env_valid = 2;
}
+#ifdef CONFIG_OMAP2420H4
+bad_flash:
+#endif
return (0);
}
int env_init(void)
{
DECLARE_GLOBAL_DATA_PTR;
+#ifdef CONFIG_OMAP2420H4
+ int flash_probe(void);
+ if(flash_probe() == 0)
+ goto bad_flash;
+#endif
if (crc32(0, env_ptr->data, ENV_SIZE) == env_ptr->crc) {
gd->env_addr = (ulong)&(env_ptr->data);
gd->env_valid = 1;
- } else {
- gd->env_addr = (ulong)&default_environment[0];
- gd->env_valid = 0;
+ return(0);
}
-
+#ifdef CONFIG_OMAP2420H4
+bad_flash:
+#endif
+ gd->env_addr = (ulong)&default_environment[0];
+ gd->env_valid = 0;
return (0);
}
--- /dev/null
+#
+# (C) Copyright 2000-2003
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = lib$(CPU).a
+
+START = start.o
+OBJS = interrupts.o cpu.o
+
+all: .depend $(START) $(LIB)
+
+$(LIB): $(OBJS)
+ $(AR) crv $@ $(OBJS)
+
+#########################################################################
+
+.depend: Makefile $(START:.o=.S) $(OBJS:.o=.c)
+ $(CC) -M $(CFLAGS) $(START:.o=.S) $(OBJS:.o=.c) > $@
+
+sinclude .depend
+
+#########################################################################
--- /dev/null
+#
+# (C) Copyright 2002
+# Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+PLATFORM_RELFLAGS += -fno-strict-aliasing -fno-common -ffixed-r8 \
+
+PLATFORM_CPPFLAGS += -mapcs-32 -march=armv6
--- /dev/null
+/*
+ * (C) Copyright 2004 Texas Insturments
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * CPU specific code
+ */
+
+#include <common.h>
+#include <command.h>
+#include <asm/arch/omap2420.h>
+
+/* read co-processor 15, register #1 (control register) */
+static unsigned long read_p15_c1 (void)
+{
+ unsigned long value;
+
+ __asm__ __volatile__(
+ "mrc p15, 0, %0, c1, c0, 0 @ read control reg\n"
+ : "=r" (value)
+ :
+ : "memory");
+ return value;
+}
+
+/* write to co-processor 15, register #1 (control register) */
+static void write_p15_c1 (unsigned long value)
+{
+ __asm__ __volatile__(
+ "mcr p15, 0, %0, c1, c0, 0 @ write it back\n"
+ :
+ : "r" (value)
+ : "memory");
+
+ read_p15_c1 ();
+}
+
+static void cp_delay (void)
+{
+ volatile int i;
+
+ /* Many OMAP regs need at least 2 nops */
+ for (i = 0; i < 100; i++);
+}
+
+/* See also ARM Ref. Man. */
+#define C1_MMU (1<<0) /* mmu off/on */
+#define C1_ALIGN (1<<1) /* alignment faults off/on */
+#define C1_DC (1<<2) /* dcache off/on */
+#define C1_WB (1<<3) /* merging write buffer on/off */
+#define C1_BIG_ENDIAN (1<<7) /* big endian off/on */
+#define C1_SYS_PROT (1<<8) /* system protection */
+#define C1_ROM_PROT (1<<9) /* ROM protection */
+#define C1_IC (1<<12) /* icache off/on */
+#define C1_HIGH_VECTORS (1<<13) /* location of vectors: low/high addresses */
+#define RESERVED_1 (0xf << 3) /* must be 111b for R/W */
+
+int cpu_init (void)
+{
+ /*
+ * setup up stacks if necessary
+ */
+#ifdef CONFIG_USE_IRQ
+ DECLARE_GLOBAL_DATA_PTR;
+
+ IRQ_STACK_START = _armboot_start - CFG_MALLOC_LEN - CFG_GBL_DATA_SIZE - 4;
+ FIQ_STACK_START = IRQ_STACK_START - CONFIG_STACKSIZE_IRQ;
+#endif
+ return 0;
+}
+
+int cleanup_before_linux (void)
+{
+ /*
+ * this function is called just before we call linux
+ * it prepares the processor for linux
+ *
+ * we turn off caches etc ...
+ */
+
+ unsigned long i;
+
+ disable_interrupts ();
+
+#ifdef CONFIG_LCD
+ {
+ extern void lcd_disable(void);
+ extern void lcd_panel_disable(void);
+
+ lcd_disable(); /* proper disable of lcd & panel */
+ lcd_panel_disable();
+ }
+#endif
+
+ /* turn off I/D-cache */
+ asm ("mrc p15, 0, %0, c1, c0, 0":"=r" (i));
+ i &= ~(C1_DC | C1_IC);
+ asm ("mcr p15, 0, %0, c1, c0, 0": :"r" (i));
+
+ /* flush I/D-cache */
+ i = 0;
+ asm ("mcr p15, 0, %0, c7, c7, 0": :"r" (i)); // invalidate both caches and flush btb
+ asm ("mcr p15, 0, %0, c7, c10, 4": :"r" (i)); // mem barrier to sync things
+ return(0);
+}
+
+int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ extern void reset_cpu (ulong addr);
+
+ disable_interrupts ();
+ reset_cpu (0);
+ /*NOTREACHED*/
+ return(0);
+}
+
+void icache_enable (void)
+{
+ ulong reg;
+
+ reg = read_p15_c1 (); /* get control reg. */
+ cp_delay ();
+ write_p15_c1 (reg | C1_IC);
+}
+
+void icache_disable (void)
+{
+ ulong reg;
+
+ reg = read_p15_c1 ();
+ cp_delay ();
+ write_p15_c1 (reg & ~C1_IC);
+}
+
+int icache_status (void)
+{
+ return(read_p15_c1 () & C1_IC) != 0;
+}
--- /dev/null
+/*
+ * (C) Copyright 2004\r
+ * Texas Instruments\r
+ * Richard Woodruff <r-woodruff2@ti.com>\r
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Alex Zuepke <azu@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/bits.h>
+#include <asm/arch/omap2420.h>
+#include <asm/proc-armv/ptrace.h>
+
+extern void reset_cpu(ulong addr);
+#define TIMER_LOAD_VAL 0
+
+/* macro to read the 32 bit timer */
+#define READ_TIMER (*(volatile ulong *)(CFG_TIMERBASE+TCRR))
+
+#ifdef CONFIG_USE_IRQ
+/* enable IRQ interrupts */
+void enable_interrupts (void)
+{
+ unsigned long temp;
+ __asm__ __volatile__("mrs %0, cpsr\n"
+ "bic %0, %0, #0x80\n"
+ "msr cpsr_c, %0"
+ : "=r" (temp)
+ :
+ : "memory");
+}
+
+/*
+ * disable IRQ/FIQ interrupts
+ * returns true if interrupts had been enabled before we disabled them
+ */
+int disable_interrupts (void)
+{
+ unsigned long old,temp;
+ __asm__ __volatile__("mrs %0, cpsr\n"
+ "orr %1, %0, #0xc0\n"
+ "msr cpsr_c, %1"
+ : "=r" (old), "=r" (temp)
+ :
+ : "memory");
+ return(old & 0x80) == 0;
+}
+#else
+void enable_interrupts (void)
+{
+ return;
+}
+int disable_interrupts (void)
+{
+ return 0;
+}
+#endif
+
+
+void bad_mode (void)
+{
+ panic ("Resetting CPU ...\n");
+ reset_cpu (0);
+}
+
+void show_regs (struct pt_regs *regs)
+{
+ unsigned long flags;
+ const char *processor_modes[] = {
+ "USER_26", "FIQ_26", "IRQ_26", "SVC_26",
+ "UK4_26", "UK5_26", "UK6_26", "UK7_26",
+ "UK8_26", "UK9_26", "UK10_26", "UK11_26",
+ "UK12_26", "UK13_26", "UK14_26", "UK15_26",
+ "USER_32", "FIQ_32", "IRQ_32", "SVC_32",
+ "UK4_32", "UK5_32", "UK6_32", "ABT_32",
+ "UK8_32", "UK9_32", "UK10_32", "UND_32",
+ "UK12_32", "UK13_32", "UK14_32", "SYS_32",
+ };
+
+ flags = condition_codes (regs);
+
+ printf ("pc : [<%08lx>] lr : [<%08lx>]\n"
+ "sp : %08lx ip : %08lx fp : %08lx\n",
+ instruction_pointer (regs),
+ regs->ARM_lr, regs->ARM_sp, regs->ARM_ip, regs->ARM_fp);
+ printf ("r10: %08lx r9 : %08lx r8 : %08lx\n",
+ regs->ARM_r10, regs->ARM_r9, regs->ARM_r8);
+ printf ("r7 : %08lx r6 : %08lx r5 : %08lx r4 : %08lx\n",
+ regs->ARM_r7, regs->ARM_r6, regs->ARM_r5, regs->ARM_r4);
+ printf ("r3 : %08lx r2 : %08lx r1 : %08lx r0 : %08lx\n",
+ regs->ARM_r3, regs->ARM_r2, regs->ARM_r1, regs->ARM_r0);
+ printf ("Flags: %c%c%c%c",
+ flags & CC_N_BIT ? 'N' : 'n',
+ flags & CC_Z_BIT ? 'Z' : 'z',
+ flags & CC_C_BIT ? 'C' : 'c', flags & CC_V_BIT ? 'V' : 'v');
+ printf (" IRQs %s FIQs %s Mode %s%s\n",
+ interrupts_enabled (regs) ? "on" : "off",
+ fast_interrupts_enabled (regs) ? "on" : "off",
+ processor_modes[processor_mode (regs)],
+ thumb_mode (regs) ? " (T)" : "");
+}
+
+void do_undefined_instruction (struct pt_regs *pt_regs)
+{
+ printf ("undefined instruction\n");
+ show_regs (pt_regs);
+ bad_mode ();
+}
+
+void do_software_interrupt (struct pt_regs *pt_regs)
+{
+ printf ("software interrupt\n");
+ show_regs (pt_regs);
+ bad_mode ();
+}
+
+void do_prefetch_abort (struct pt_regs *pt_regs)
+{
+ printf ("prefetch abort\n");
+ show_regs (pt_regs);
+ bad_mode ();
+}
+
+void do_data_abort (struct pt_regs *pt_regs)
+{
+ printf ("data abort\n");
+ show_regs (pt_regs);
+ bad_mode ();
+}
+
+void do_not_used (struct pt_regs *pt_regs)
+{
+ printf ("not used\n");
+ show_regs (pt_regs);
+ bad_mode ();
+}
+
+void do_fiq (struct pt_regs *pt_regs)
+{
+ printf ("fast interrupt request\n");
+ show_regs (pt_regs);
+ bad_mode ();
+}
+
+void do_irq (struct pt_regs *pt_regs)
+{
+ printf ("interrupt request\n");
+ show_regs (pt_regs);
+ bad_mode ();
+}
+
+static ulong timestamp;
+static ulong lastinc;
+
+/* nothing really to do with interrupts, just starts up a counter. */
+int interrupt_init (void)
+{
+ int32_t val;
+
+ /* Start the counter ticking up */
+ *((int32_t *) (CFG_TIMERBASE + TLDR)) = TIMER_LOAD_VAL; /* reload value on overflow*/
+ val = (CFG_PVT << 2) | BIT5 | BIT1 | BIT0; /* mask to enable timer*/
+ *((int32_t *) (CFG_TIMERBASE + TCLR)) = val; /* start timer */
+
+ reset_timer_masked(); /* init the timestamp and lastinc value */
+
+ return(0);
+}
+
+/*
+ * timer without interrupts
+ */
+void reset_timer (void)
+{
+ reset_timer_masked ();
+}
+
+ulong get_timer (ulong base)
+{
+ return get_timer_masked () - base;
+}
+
+void set_timer (ulong t)
+{
+ timestamp = t;
+}
+
+/* delay x useconds AND perserve advance timstamp value */
+void udelay (unsigned long usec)
+{
+ ulong tmo, tmp;
+
+ if (usec >= 1000) { /* if "big" number, spread normalization to seconds */
+ tmo = usec / 1000; /* start to normalize for usec to ticks per sec */
+ tmo *= CFG_HZ; /* find number of "ticks" to wait to achieve target */
+ tmo /= 1000; /* finish normalize. */
+ } else { /* else small number, don't kill it prior to HZ multiply */
+ tmo = usec * CFG_HZ;
+ tmo /= (1000*1000);
+ }
+
+ tmp = get_timer (0); /* get current timestamp */
+ if ( (tmo + tmp + 1) < tmp )/* if setting this forward will roll time stamp */
+ reset_timer_masked (); /* reset "advancing" timestamp to 0, set lastinc value */
+ else
+ tmo += tmp; /* else, set advancing stamp wake up time */
+ while (get_timer_masked () < tmo)/* loop till event */
+ /*NOP*/;
+}
+
+void reset_timer_masked (void)
+{
+ /* reset time */
+ lastinc = READ_TIMER; /* capture current incrementer value time */
+ timestamp = 0; /* start "advancing" time stamp from 0 */
+}
+
+ulong get_timer_masked (void)
+{
+ ulong now = READ_TIMER; /* current tick value */
+
+ if (now >= lastinc) /* normal mode (non roll) */
+ timestamp += (now - lastinc); /* move stamp fordward with absoulte diff ticks */
+ else /* we have rollover of incrementer */
+ timestamp += (0xFFFFFFFF - lastinc) + now;
+ lastinc = now;
+ return timestamp;
+}
+
+/* waits specified delay value and resets timestamp */
+void udelay_masked (unsigned long usec)
+{
+ ulong tmo;
+
+ if (usec >= 1000) { /* if "big" number, spread normalization to seconds */
+ tmo = usec / 1000; /* start to normalize for usec to ticks per sec */
+ tmo *= CFG_HZ; /* find number of "ticks" to wait to achieve target */
+ tmo /= 1000; /* finish normalize. */
+ } else { /* else small number, don't kill it prior to HZ multiply */
+ tmo = usec * CFG_HZ;
+ tmo /= (1000*1000);
+ }
+ reset_timer_masked (); /* set "advancing" timestamp to 0, set lastinc vaule */
+ while (get_timer_masked () < tmo) /* wait for time stamp to overtake tick number.*/
+ /* NOP */;
+}
+
+/*
+ * This function is derived from PowerPC code (read timebase as long long).
+ * On ARM it just returns the timer value.
+ */
+unsigned long long get_ticks(void)
+{
+ return get_timer(0);
+}
+
+/*
+ * This function is derived from PowerPC code (timebase clock frequency).
+ * On ARM it returns the number of timer ticks per second.
+ */
+ulong get_tbclk (void)
+{
+ ulong tbclk;
+ tbclk = CFG_HZ;
+ return tbclk;
+}
--- /dev/null
+/*
+ * armboot - Startup Code for OMP2420/ARM1136 CPU-core
+ *
+ * Copyright (c) 2004 Texas Instruments <r-woodruff2@ti.com>
+ *
+ * Copyright (c) 2001 Marius Gröger <mag@sysgo.de>
+ * Copyright (c) 2002 Alex Züpke <azu@sysgo.de>
+ * Copyright (c) 2002 Gary Jennejohn <gj@denx.de>
+ * Copyright (c) 2003 Richard Woodruff <r-woodruff2@ti.com>
+ * Copyright (c) 2003 Kshitij <kshitij@ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <version.h>
+#include <asm/arch/omap2420.h>
+
+.globl _start
+_start: b reset
+ ldr pc, _undefined_instruction
+ ldr pc, _software_interrupt
+ ldr pc, _prefetch_abort
+ ldr pc, _data_abort
+ ldr pc, _not_used
+ ldr pc, _irq
+ ldr pc, _fiq
+
+_undefined_instruction: .word undefined_instruction
+_software_interrupt: .word software_interrupt
+_prefetch_abort: .word prefetch_abort
+_data_abort: .word data_abort
+_not_used: .word not_used
+_irq: .word irq
+_fiq: .word fiq
+_pad: .word 0x12345678 /* now 16*4=64 */
+.global _end_vect
+_end_vect:
+
+ .balignl 16,0xdeadbeef
+/*
+ *************************************************************************
+ *
+ * Startup Code (reset vector)
+ *
+ * do important init only if we don't start from memory!
+ * setup Memory and board specific bits prior to relocation.
+ * relocate armboot to ram
+ * setup stack
+ *
+ *************************************************************************
+ */
+
+_TEXT_BASE:
+ .word TEXT_BASE
+
+.globl _armboot_start
+_armboot_start:
+ .word _start
+
+/*
+ * These are defined in the board-specific linker script.
+ */
+.globl _bss_start
+_bss_start:
+ .word __bss_start
+
+.globl _bss_end
+_bss_end:
+ .word _end
+
+#ifdef CONFIG_USE_IRQ
+/* IRQ stack memory (calculated at run-time) */
+.globl IRQ_STACK_START
+IRQ_STACK_START:
+ .word 0x0badc0de
+
+/* IRQ stack memory (calculated at run-time) */
+.globl FIQ_STACK_START
+FIQ_STACK_START:
+ .word 0x0badc0de
+#endif
+
+/*
+ * the actual reset code
+ */
+
+reset:
+ /*
+ * set the cpu to SVC32 mode
+ */
+ mrs r0,cpsr
+ bic r0,r0,#0x1f
+ orr r0,r0,#0xd3
+ msr cpsr,r0
+
+#ifdef CONFIG_OMAP2420H4
+ /* Copy vectors to mask ROM indirect addr */
+ adr r0, _start /* r0 <- current position of code */
+ mov r2, #64 /* r2 <- size to copy */
+ add r2, r0, r2 /* r2 <- source end address */
+ mov r1, #SRAM_OFFSET0 /* build vect addr */
+ mov r3, #SRAM_OFFSET1
+ add r1, r1, r3
+ mov r3, #SRAM_OFFSET2
+ add r1, r1, r3
+next:
+ ldmia r0!, {r3-r10} /* copy from source address [r0] */
+ stmia r1!, {r3-r10} /* copy to target address [r1] */
+ cmp r0, r2 /* until source end address [r2] */
+ bne next /* loop until equal */
+#ifdef CONFIG_PARTIAL_SRAM
+ bl cpy_clk_code /* put dpll adjust code behind vectors */
+#endif
+#endif
+ /* the mask ROM code should have PLL and others stable */
+ bl cpu_init_crit
+
+relocate: /* relocate U-Boot to RAM */
+ adr r0, _start /* r0 <- current position of code */
+ ldr r1, _TEXT_BASE /* test if we run from flash or RAM */
+ cmp r0, r1 /* don't reloc during debug */
+ beq stack_setup
+
+ ldr r2, _armboot_start
+ ldr r3, _bss_start
+ sub r2, r3, r2 /* r2 <- size of armboot */
+ add r2, r0, r2 /* r2 <- source end address */
+
+copy_loop:
+ ldmia r0!, {r3-r10} /* copy from source address [r0] */
+ stmia r1!, {r3-r10} /* copy to target address [r1] */
+ cmp r0, r2 /* until source end addreee [r2] */
+ ble copy_loop
+
+ /* Set up the stack */
+stack_setup:
+ ldr r0, _TEXT_BASE /* upper 128 KiB: relocated uboot */
+ sub r0, r0, #CFG_MALLOC_LEN /* malloc area */
+ sub r0, r0, #CFG_GBL_DATA_SIZE /* bdinfo */
+#ifdef CONFIG_USE_IRQ
+ sub r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ)
+#endif
+ sub sp, r0, #12 /* leave 3 words for abort-stack */
+
+clear_bss:
+ ldr r0, _bss_start /* find start of bss segment */
+ ldr r1, _bss_end /* stop here */
+ mov r2, #0x00000000 /* clear */
+
+clbss_l:str r2, [r0] /* clear loop... */
+ add r0, r0, #4
+ cmp r0, r1
+ bne clbss_l
+
+ ldr pc, _start_armboot
+
+_start_armboot: .word start_armboot
+
+
+/*
+ *************************************************************************
+ *
+ * CPU_init_critical registers
+ *
+ * setup important registers
+ * setup memory timing
+ *
+ *************************************************************************
+ */
+cpu_init_crit:
+ /*
+ * flush v4 I/D caches
+ */
+ mov r0, #0
+ mcr p15, 0, r0, c7, c7, 0 /* flush v3/v4 cache */
+ mcr p15, 0, r0, c8, c7, 0 /* flush v4 TLB */
+
+ /*
+ * disable MMU stuff and caches
+ */
+ mrc p15, 0, r0, c1, c0, 0
+ bic r0, r0, #0x00002300 @ clear bits 13, 9:8 (--V- --RS)
+ bic r0, r0, #0x00000087 @ clear bits 7, 2:0 (B--- -CAM)
+ orr r0, r0, #0x00000002 @ set bit 2 (A) Align
+#ifndef CONFIG_ICACHE_OFF
+ orr r0, r0, #0x00001000 @ set bit 12 (I) I-Cache
+#endif
+ mcr p15, 0, r0, c1, c0, 0
+
+ /*
+ * Jump to board specific initialization... The Mask ROM will have already initialized
+ * basic memory. Go here to bump up clock rate and handle wake up conditions.
+ */
+ adr r0, _start /* r0 <- current position of code */
+ ldr r1, _TEXT_BASE /* test if we run from flash or RAM */
+ cmp r0, r1 /* pass on info about skipping some init portions */
+ moveq r0,#0x1 /* flag to skip prcm and sdrc setup */
+ movne r0,#0x0
+ mov ip, lr /* persevere link reg across call */
+ bl platformsetup /* go setup pll,mux,memory */
+ mov lr, ip /* restore link */
+ mov pc, lr /* back to my caller */
+/*
+ *************************************************************************
+ *
+ * Interrupt handling
+ *
+ *************************************************************************
+ */
+@
+@ IRQ stack frame.
+@
+#define S_FRAME_SIZE 72
+
+#define S_OLD_R0 68
+#define S_PSR 64
+#define S_PC 60
+#define S_LR 56
+#define S_SP 52
+
+#define S_IP 48
+#define S_FP 44
+#define S_R10 40
+#define S_R9 36
+#define S_R8 32
+#define S_R7 28
+#define S_R6 24
+#define S_R5 20
+#define S_R4 16
+#define S_R3 12
+#define S_R2 8
+#define S_R1 4
+#define S_R0 0
+
+#define MODE_SVC 0x13
+#define I_BIT 0x80
+
+/*
+ * use bad_save_user_regs for abort/prefetch/undef/swi ...
+ * use irq_save_user_regs / irq_restore_user_regs for IRQ/FIQ handling
+ */
+
+ .macro bad_save_user_regs
+ sub sp, sp, #S_FRAME_SIZE @ carve out a frame on current user stack
+ stmia sp, {r0 - r12} @ Save user registers (now in svc mode) r0-r12
+
+ ldr r2, _armboot_start
+ sub r2, r2, #(CFG_MALLOC_LEN)
+ sub r2, r2, #(CFG_GBL_DATA_SIZE+8) @ set base 2 words into abort stack
+ ldmia r2, {r2 - r3} @ get values for "aborted" pc and cpsr (into parm regs)
+ add r0, sp, #S_FRAME_SIZE @ grab pointer to old stack
+
+ add r5, sp, #S_SP
+ mov r1, lr
+ stmia r5, {r0 - r3} @ save sp_SVC, lr_SVC, pc, cpsr
+ mov r0, sp @ save current stack into r0 (param register)
+ .endm
+
+ .macro irq_save_user_regs
+ sub sp, sp, #S_FRAME_SIZE
+ stmia sp, {r0 - r12} @ Calling r0-r12
+ add r8, sp, #S_PC @ !!!! R8 NEEDS to be saved !!!! a reserved stack spot would be good.
+ stmdb r8, {sp, lr}^ @ Calling SP, LR
+ str lr, [r8, #0] @ Save calling PC
+ mrs r6, spsr
+ str r6, [r8, #4] @ Save CPSR
+ str r0, [r8, #8] @ Save OLD_R0
+ mov r0, sp
+ .endm
+
+ .macro irq_restore_user_regs
+ ldmia sp, {r0 - lr}^ @ Calling r0 - lr
+ mov r0, r0
+ ldr lr, [sp, #S_PC] @ Get PC
+ add sp, sp, #S_FRAME_SIZE
+ subs pc, lr, #4 @ return & move spsr_svc into cpsr
+ .endm
+
+ .macro get_bad_stack
+ ldr r13, _armboot_start @ setup our mode stack (enter in banked mode)
+ sub r13, r13, #(CFG_MALLOC_LEN) @ move past malloc pool
+ sub r13, r13, #(CFG_GBL_DATA_SIZE+8) @ move to reserved a couple spots for abort stack
+
+ str lr, [r13] @ save caller lr in position 0 of saved stack
+ mrs lr, spsr @ get the spsr
+ str lr, [r13, #4] @ save spsr in position 1 of saved stack
+
+ mov r13, #MODE_SVC @ prepare SVC-Mode
+ @ msr spsr_c, r13
+ msr spsr, r13 @ switch modes, make sure moves will execute
+ mov lr, pc @ capture return pc
+ movs pc, lr @ jump to next instruction & switch modes.
+ .endm
+
+ .macro get_bad_stack_swi
+ sub r13, r13, #4 @ space on current stack for scratch reg.
+ str r0, [r13] @ save R0's value.
+ ldr r0, _armboot_start @ get data regions start
+ sub r0, r0, #(CFG_MALLOC_LEN) @ move past malloc pool
+ sub r0, r0, #(CFG_GBL_DATA_SIZE+8) @ move past gbl and a couple spots for abort stack
+ str lr, [r0] @ save caller lr in position 0 of saved stack
+ mrs r0, spsr @ get the spsr
+ str lr, [r0, #4] @ save spsr in position 1 of saved stack
+ ldr r0, [r13] @ restore r0
+ add r13, r13, #4 @ pop stack entry
+ .endm
+
+ .macro get_irq_stack @ setup IRQ stack
+ ldr sp, IRQ_STACK_START
+ .endm
+
+ .macro get_fiq_stack @ setup FIQ stack
+ ldr sp, FIQ_STACK_START
+ .endm
+
+/*
+ * exception handlers
+ */
+ .align 5
+undefined_instruction:
+ get_bad_stack
+ bad_save_user_regs
+ bl do_undefined_instruction
+
+ .align 5
+software_interrupt:
+ get_bad_stack_swi
+ bad_save_user_regs
+ bl do_software_interrupt
+
+ .align 5
+prefetch_abort:
+ get_bad_stack
+ bad_save_user_regs
+ bl do_prefetch_abort
+
+ .align 5
+data_abort:
+ get_bad_stack
+ bad_save_user_regs
+ bl do_data_abort
+
+ .align 5
+not_used:
+ get_bad_stack
+ bad_save_user_regs
+ bl do_not_used
+
+#ifdef CONFIG_USE_IRQ
+
+ .align 5
+irq:
+ get_irq_stack
+ irq_save_user_regs
+ bl do_irq
+ irq_restore_user_regs
+
+ .align 5
+fiq:
+ get_fiq_stack
+ /* someone ought to write a more effiction fiq_save_user_regs */
+ irq_save_user_regs
+ bl do_fiq
+ irq_restore_user_regs
+
+#else
+
+ .align 5
+irq:
+ get_bad_stack
+ bad_save_user_regs
+ bl do_irq
+
+ .align 5
+fiq:
+ get_bad_stack
+ bad_save_user_regs
+ bl do_fiq
+
+#endif
+ .align 5
+.global arm1136_cache_flush
+arm1136_cache_flush:
+ mcr p15, 0, r1, c7, c5, 0 @ invalidate I cache
+ mov pc, lr @ back to caller
+
+ .align 5
+.globl reset_cpu
+reset_cpu:
+ ldr r1, rstctl /* get addr for global reset reg */
+ mov r3, #0x3 /* full reset pll+mpu */
+ str r3, [r1] /* force reset */
+ mov r0, r0
+_loop_forever:
+ b _loop_forever
+rstctl:
+ .word PM_RSTCTRL_WKUP
--- /dev/null
+This driver supports NE2000 compatible cards (those based on DP8390,
+DP83902 and similar). It can be used with PCMCIA/CF cards provided
+that the CCR is correctly initialized.
+
+The code is based on sources from the Linux kernel (pcnet_cs.c,
+8390.h) and eCOS(if_dp83902a.c, if_dp83902a.h). Both of these 2
+wonderful world are GPL, so this is, of course, GPL.
+
+I developed and tested this driver on a custom PXA255 based system and
+with a billionton CF network card connected to the PCMCIA interface of
+the micro (have a look at README.PXA_CF for the support of this port).
+
+The options you have to specify in the config file are (with the
+value for my board as an example):
+
+#define CONFIG_DRIVER_NE2000
+
+- Enables the driver
+
+#define CONFIG_DRIVER_NE2000_BASE (0x20000000+0x300)
+
+- Address where the board is mapped
+
+#define CONFIG_DRIVER_NE2000_CCR (0x28000000+0x3f8)
+
+- Address of the CCR (card configuration register). It could be found
+by enabling DEBUG in cmd_pcmcia.c. If this is not defined nothing is
+done as far as PCMCIA support is concerned.
+
+#define CONFIG_DRIVER_NE2000_VAL (0x20)
+
+- The value to be written in the CCR. It selects among different I/O
+spaces that could be used by the card.
+
+
+Enjoy!
+
+Christian Pellegrin <chri@ascensit.com>
--- /dev/null
+/*
+
+Ported to U-Boot by Christian Pellegrin <chri@ascensit.com>
+
+Based on sources from the Linux kernel (pcnet_cs.c, 8390.h) and
+eCOS(if_dp83902a.c, if_dp83902a.h). Both of these 2 wonderful world
+are GPL, so this is, of course, GPL.
+
+*/
+
+/* Generic NS8390 register definitions. */
+/* This file is part of Donald Becker's 8390 drivers, and is distributed
+ under the same license. Auto-loading of 8390.o only in v2.2 - Paul G.
+ Some of these names and comments originated from the Crynwr
+ packet drivers, which are distributed under the GPL. */
+
+#ifndef _8390_h
+#define _8390_h
+
+/* Some generic ethernet register configurations. */
+#define E8390_TX_IRQ_MASK 0xa /* For register EN0_ISR */
+#define E8390_RX_IRQ_MASK 0x5
+#define E8390_RXCONFIG 0x4 /* EN0_RXCR: broadcasts, no multicast,errors */
+#define E8390_RXOFF 0x20 /* EN0_RXCR: Accept no packets */
+#define E8390_TXCONFIG 0x00 /* EN0_TXCR: Normal transmit mode */
+#define E8390_TXOFF 0x02 /* EN0_TXCR: Transmitter off */
+
+/* Register accessed at EN_CMD, the 8390 base addr. */
+#define E8390_STOP 0x01 /* Stop and reset the chip */
+#define E8390_START 0x02 /* Start the chip, clear reset */
+#define E8390_TRANS 0x04 /* Transmit a frame */
+#define E8390_RREAD 0x08 /* Remote read */
+#define E8390_RWRITE 0x10 /* Remote write */
+#define E8390_NODMA 0x20 /* Remote DMA */
+#define E8390_PAGE0 0x00 /* Select page chip registers */
+#define E8390_PAGE1 0x40 /* using the two high-order bits */
+#define E8390_PAGE2 0x80 /* Page 3 is invalid. */
+
+/*
+ * Only generate indirect loads given a machine that needs them.
+ * - removed AMIGA_PCMCIA from this list, handled as ISA io now
+ */
+
+#define n2k_inb(port) (*((volatile unsigned char *)(port+CONFIG_DRIVER_NE2000_BASE)))
+#define n2k_outb(val,port) (*((volatile unsigned char *)(port+CONFIG_DRIVER_NE2000_BASE)) = val)
+
+#define EI_SHIFT(x) (x)
+
+#define E8390_CMD EI_SHIFT(0x00) /* The command register (for all pages) */
+/* Page 0 register offsets. */
+#define EN0_CLDALO EI_SHIFT(0x01) /* Low byte of current local dma addr RD */
+#define EN0_STARTPG EI_SHIFT(0x01) /* Starting page of ring bfr WR */
+#define EN0_CLDAHI EI_SHIFT(0x02) /* High byte of current local dma addr RD */
+#define EN0_STOPPG EI_SHIFT(0x02) /* Ending page +1 of ring bfr WR */
+#define EN0_BOUNDARY EI_SHIFT(0x03) /* Boundary page of ring bfr RD WR */
+#define EN0_TSR EI_SHIFT(0x04) /* Transmit status reg RD */
+#define EN0_TPSR EI_SHIFT(0x04) /* Transmit starting page WR */
+#define EN0_NCR EI_SHIFT(0x05) /* Number of collision reg RD */
+#define EN0_TCNTLO EI_SHIFT(0x05) /* Low byte of tx byte count WR */
+#define EN0_FIFO EI_SHIFT(0x06) /* FIFO RD */
+#define EN0_TCNTHI EI_SHIFT(0x06) /* High byte of tx byte count WR */
+#define EN0_ISR EI_SHIFT(0x07) /* Interrupt status reg RD WR */
+#define EN0_CRDALO EI_SHIFT(0x08) /* low byte of current remote dma address RD */
+#define EN0_RSARLO EI_SHIFT(0x08) /* Remote start address reg 0 */
+#define EN0_CRDAHI EI_SHIFT(0x09) /* high byte, current remote dma address RD */
+#define EN0_RSARHI EI_SHIFT(0x09) /* Remote start address reg 1 */
+#define EN0_RCNTLO EI_SHIFT(0x0a) /* Remote byte count reg WR */
+#define EN0_RCNTHI EI_SHIFT(0x0b) /* Remote byte count reg WR */
+#define EN0_RSR EI_SHIFT(0x0c) /* rx status reg RD */
+#define EN0_RXCR EI_SHIFT(0x0c) /* RX configuration reg WR */
+#define EN0_TXCR EI_SHIFT(0x0d) /* TX configuration reg WR */
+#define EN0_COUNTER0 EI_SHIFT(0x0d) /* Rcv alignment error counter RD */
+#define EN0_DCFG EI_SHIFT(0x0e) /* Data configuration reg WR */
+#define EN0_COUNTER1 EI_SHIFT(0x0e) /* Rcv CRC error counter RD */
+#define EN0_IMR EI_SHIFT(0x0f) /* Interrupt mask reg WR */
+#define EN0_COUNTER2 EI_SHIFT(0x0f) /* Rcv missed frame error counter RD */
+
+/* Bits in EN0_ISR - Interrupt status register */
+#define ENISR_RX 0x01 /* Receiver, no error */
+#define ENISR_TX 0x02 /* Transmitter, no error */
+#define ENISR_RX_ERR 0x04 /* Receiver, with error */
+#define ENISR_TX_ERR 0x08 /* Transmitter, with error */
+#define ENISR_OVER 0x10 /* Receiver overwrote the ring */
+#define ENISR_COUNTERS 0x20 /* Counters need emptying */
+#define ENISR_RDC 0x40 /* remote dma complete */
+#define ENISR_RESET 0x80 /* Reset completed */
+#define ENISR_ALL 0x3f /* Interrupts we will enable */
+
+/* Bits in EN0_DCFG - Data config register */
+#define ENDCFG_WTS 0x01 /* word transfer mode selection */
+#define ENDCFG_BOS 0x02 /* byte order selection */
+#define ENDCFG_AUTO_INIT 0x10 /* Auto-init to remove packets from ring */
+#define ENDCFG_FIFO 0x40 /* 8 bytes */
+
+
+
+/* Page 1 register offsets. */
+#define EN1_PHYS EI_SHIFT(0x01) /* This board's physical enet addr RD WR */
+#define EN1_PHYS_SHIFT(i) EI_SHIFT(i+1) /* Get and set mac address */
+#define EN1_CURPAG EI_SHIFT(0x07) /* Current memory page RD WR */
+#define EN1_MULT EI_SHIFT(0x08) /* Multicast filter mask array (8 bytes) RD WR */
+#define EN1_MULT_SHIFT(i) EI_SHIFT(8+i) /* Get and set multicast filter */
+
+/* Bits in received packet status byte and EN0_RSR*/
+#define ENRSR_RXOK 0x01 /* Received a good packet */
+#define ENRSR_CRC 0x02 /* CRC error */
+#define ENRSR_FAE 0x04 /* frame alignment error */
+#define ENRSR_FO 0x08 /* FIFO overrun */
+#define ENRSR_MPA 0x10 /* missed pkt */
+#define ENRSR_PHY 0x20 /* physical/multicast address */
+#define ENRSR_DIS 0x40 /* receiver disable. set in monitor mode */
+#define ENRSR_DEF 0x80 /* deferring */
+
+/* Transmitted packet status, EN0_TSR. */
+#define ENTSR_PTX 0x01 /* Packet transmitted without error */
+#define ENTSR_ND 0x02 /* The transmit wasn't deferred. */
+#define ENTSR_COL 0x04 /* The transmit collided at least once. */
+#define ENTSR_ABT 0x08 /* The transmit collided 16 times, and was deferred. */
+#define ENTSR_CRS 0x10 /* The carrier sense was lost. */
+#define ENTSR_FU 0x20 /* A "FIFO underrun" occurred during transmit. */
+#define ENTSR_CDH 0x40 /* The collision detect "heartbeat" signal was lost. */
+#define ENTSR_OWC 0x80 /* There was an out-of-window collision. */
+
+#define NIC_RECEIVE_MONITOR_MODE 0x20
+
+#endif /* _8390_h */
cs8900.o ct69000.o dataflash.o dc2114x.o dm9000x.o \
e1000.o eepro100.o \
i8042.o i82365.o inca-ip_sw.o keyboard.o \
- lan91c96.o natsemi.o netarm_eth.o netconsole.o \
+ lan91c96.o \
+ natsemi.o ne2000.o netarm_eth.o netconsole.o \
ns16550.o ns8382x.o ns87308.o omap1510_i2c.o \
- pci.o pci_auto.o pci_indirect.o \
+ omap24xx_i2c.o pci.o pci_auto.o pci_indirect.o \
pcnet.o plb2800_eth.o \
ps2ser.o ps2mult.o pc_keyb.o \
rtl8019.o rtl8139.o rtl8169.o \
--- /dev/null
+/*
+Ported to U-Boot by Christian Pellegrin <chri@ascensit.com>
+
+Based on sources from the Linux kernel (pcnet_cs.c, 8390.h) and
+eCOS(if_dp83902a.c, if_dp83902a.h). Both of these 2 wonderful world
+are GPL, so this is, of course, GPL.
+
+
+==========================================================================
+
+dev/if_dp83902a.c
+
+Ethernet device driver for NS DP83902a ethernet controller
+
+==========================================================================
+####ECOSGPLCOPYRIGHTBEGIN####
+-------------------------------------------
+This file is part of eCos, the Embedded Configurable Operating System.
+Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
+
+eCos is free software; you can redistribute it and/or modify it under
+the terms of the GNU General Public License as published by the Free
+Software Foundation; either version 2 or (at your option) any later version.
+
+eCos is distributed in the hope that it will be useful, but WITHOUT ANY
+WARRANTY; without even the implied warranty of MERCHANTABILITY or
+FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+for more details.
+
+You should have received a copy of the GNU General Public License along
+with eCos; if not, write to the Free Software Foundation, Inc.,
+59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+
+As a special exception, if other files instantiate templates or use macros
+or inline functions from this file, or you compile this file and link it
+with other works to produce a work based on this file, this file does not
+by itself cause the resulting work to be covered by the GNU General Public
+License. However the source code for this file must still be made available
+in accordance with section (3) of the GNU General Public License.
+
+This exception does not invalidate any other reasons why a work based on
+this file might be covered by the GNU General Public License.
+
+Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.
+at http://sources.redhat.com/ecos/ecos-license/
+-------------------------------------------
+####ECOSGPLCOPYRIGHTEND####
+####BSDCOPYRIGHTBEGIN####
+
+-------------------------------------------
+
+Portions of this software may have been derived from OpenBSD or other sources,
+and are covered by the appropriate copyright disclaimers included herein.
+
+-------------------------------------------
+
+####BSDCOPYRIGHTEND####
+==========================================================================
+#####DESCRIPTIONBEGIN####
+
+Author(s): gthomas
+Contributors: gthomas, jskov, rsandifo
+Date: 2001-06-13
+Purpose:
+Description:
+
+FIXME: Will fail if pinged with large packets (1520 bytes)
+Add promisc config
+Add SNMP
+
+####DESCRIPTIONEND####
+
+
+==========================================================================
+
+*/
+
+#include <common.h>
+#include <command.h>
+#include <net.h>
+#include <malloc.h>
+
+#ifdef CONFIG_DRIVER_NE2000
+
+/* wor around udelay resetting OCR */
+static void my_udelay(long us) {
+ long tmo;
+
+ tmo = get_timer (0) + us * CFG_HZ / 1000000; /* will this be much greater than 0 ? */
+ while (get_timer (0) < tmo);
+}
+
+#define mdelay(n) my_udelay((n)*1000)
+
+/* forward definition of function used for the uboot interface */
+void uboot_push_packet_len(int len);
+void uboot_push_tx_done(int key, int val);
+
+/* timeout for tx/rx in s */
+#define TOUT 5
+
+#define ETHER_ADDR_LEN 6
+
+/*
+ ------------------------------------------------------------------------
+ Debugging details
+
+ Set to perms of:
+ 0 disables all debug output
+ 1 for process debug output
+ 2 for added data IO output: get_reg, put_reg
+ 4 for packet allocation/free output
+ 8 for only startup status, so we can tell we're installed OK
+*/
+/*#define DEBUG 0xf*/
+#define DEBUG 0
+
+#if DEBUG & 1
+#define DEBUG_FUNCTION() do { printf("%s\n", __FUNCTION__); } while (0)
+#define DEBUG_LINE() do { printf("%d\n", __LINE__); } while (0)
+#else
+#define DEBUG_FUNCTION() do {} while(0)
+#define DEBUG_LINE() do {} while(0)
+#endif
+
+#include "ne2000.h"
+
+#if DEBUG & 1
+#define PRINTK(args...) printf(args)
+#else
+#define PRINTK(args...)
+#endif
+
+static dp83902a_priv_data_t nic; /* just one instance of the card supported */
+
+static bool
+dp83902a_init(void)
+{
+ dp83902a_priv_data_t *dp = &nic;
+ cyg_uint8* base;
+ int i;
+
+ DEBUG_FUNCTION();
+
+ base = dp->base;
+ if (!base) return false; /* No device found */
+
+ DEBUG_LINE();
+
+ /* Prepare ESA */
+ DP_OUT(base, DP_CR, DP_CR_NODMA | DP_CR_PAGE1); /* Select page 1 */
+ /* Use the address from the serial EEPROM */
+ for (i = 0; i < 6; i++)
+ DP_IN(base, DP_P1_PAR0+i, dp->esa[i]);
+ DP_OUT(base, DP_CR, DP_CR_NODMA | DP_CR_PAGE0); /* Select page 0 */
+
+ printf("NE2000 - %s ESA: %02x:%02x:%02x:%02x:%02x:%02x\n",
+ "eeprom",
+ dp->esa[0],
+ dp->esa[1],
+ dp->esa[2],
+ dp->esa[3],
+ dp->esa[4],
+ dp->esa[5] );
+
+ return true;
+}
+
+static void
+dp83902a_stop(void)
+{
+ dp83902a_priv_data_t *dp = &nic;
+ cyg_uint8 *base = dp->base;
+
+ DEBUG_FUNCTION();
+
+ DP_OUT(base, DP_CR, DP_CR_PAGE0 | DP_CR_NODMA | DP_CR_STOP); /* Brutal */
+ DP_OUT(base, DP_ISR, 0xFF); /* Clear any pending interrupts */
+ DP_OUT(base, DP_IMR, 0x00); /* Disable all interrupts */
+
+ dp->running = false;
+}
+
+/*
+ This function is called to "start up" the interface. It may be called
+ multiple times, even when the hardware is already running. It will be
+ called whenever something "hardware oriented" changes and should leave
+ the hardware ready to send/receive packets.
+*/
+static void
+dp83902a_start(unsigned char * enaddr)
+{
+ dp83902a_priv_data_t *dp = &nic;
+ cyg_uint8 *base = dp->base;
+ int i;
+
+ DEBUG_FUNCTION();
+
+ DP_OUT(base, DP_CR, DP_CR_PAGE0 | DP_CR_NODMA | DP_CR_STOP); /* Brutal */
+ DP_OUT(base, DP_DCR, DP_DCR_INIT);
+ DP_OUT(base, DP_RBCH, 0); /* Remote byte count */
+ DP_OUT(base, DP_RBCL, 0);
+ DP_OUT(base, DP_RCR, DP_RCR_MON); /* Accept no packets */
+ DP_OUT(base, DP_TCR, DP_TCR_LOCAL); /* Transmitter [virtually] off */
+ DP_OUT(base, DP_TPSR, dp->tx_buf1); /* Transmitter start page */
+ dp->tx1 = dp->tx2 = 0;
+ dp->tx_next = dp->tx_buf1;
+ dp->tx_started = false;
+ DP_OUT(base, DP_PSTART, dp->rx_buf_start); /* Receive ring start page */
+ DP_OUT(base, DP_BNDRY, dp->rx_buf_end-1); /* Receive ring boundary */
+ DP_OUT(base, DP_PSTOP, dp->rx_buf_end); /* Receive ring end page */
+ dp->rx_next = dp->rx_buf_start-1;
+ DP_OUT(base, DP_ISR, 0xFF); /* Clear any pending interrupts */
+ DP_OUT(base, DP_IMR, DP_IMR_All); /* Enable all interrupts */
+ DP_OUT(base, DP_CR, DP_CR_NODMA | DP_CR_PAGE1 | DP_CR_STOP); /* Select page 1 */
+ DP_OUT(base, DP_P1_CURP, dp->rx_buf_start); /* Current page - next free page for Rx */
+ for (i = 0; i < ETHER_ADDR_LEN; i++) {
+ DP_OUT(base, DP_P1_PAR0+i, enaddr[i]);
+ }
+ /* Enable and start device */
+ DP_OUT(base, DP_CR, DP_CR_PAGE0 | DP_CR_NODMA | DP_CR_START);
+ DP_OUT(base, DP_TCR, DP_TCR_NORMAL); /* Normal transmit operations */
+ DP_OUT(base, DP_RCR, DP_RCR_AB); /* Accept broadcast, no errors, no multicast */
+ dp->running = true;
+}
+
+/*
+ This routine is called to start the transmitter. It is split out from the
+ data handling routine so it may be called either when data becomes first
+ available or when an Tx interrupt occurs
+*/
+
+static void
+dp83902a_start_xmit(int start_page, int len)
+{
+ dp83902a_priv_data_t *dp = (dp83902a_priv_data_t *) &nic;
+ cyg_uint8 *base = dp->base;
+
+ DEBUG_FUNCTION();
+
+#if DEBUG & 1
+ printf("Tx pkt %d len %d\n", start_page, len);
+ if (dp->tx_started)
+ printf("TX already started?!?\n");
+#endif
+
+ DP_OUT(base, DP_ISR, (DP_ISR_TxP | DP_ISR_TxE));
+ DP_OUT(base, DP_CR, DP_CR_PAGE0 | DP_CR_NODMA | DP_CR_START);
+ DP_OUT(base, DP_TBCL, len & 0xFF);
+ DP_OUT(base, DP_TBCH, len >> 8);
+ DP_OUT(base, DP_TPSR, start_page);
+ DP_OUT(base, DP_CR, DP_CR_NODMA | DP_CR_TXPKT | DP_CR_START);
+
+ dp->tx_started = true;
+}
+
+/*
+ This routine is called to send data to the hardware. It is known a-priori
+ that there is free buffer space (dp->tx_next).
+*/
+static void
+dp83902a_send(unsigned char *data, int total_len, unsigned long key)
+{
+ struct dp83902a_priv_data *dp = (struct dp83902a_priv_data *) &nic;
+ cyg_uint8 *base = dp->base;
+ int len, start_page, pkt_len, i, isr;
+#if DEBUG & 4
+ int dx;
+#endif
+
+ DEBUG_FUNCTION();
+
+ len = pkt_len = total_len;
+ if (pkt_len < IEEE_8023_MIN_FRAME) pkt_len = IEEE_8023_MIN_FRAME;
+
+ start_page = dp->tx_next;
+ if (dp->tx_next == dp->tx_buf1) {
+ dp->tx1 = start_page;
+ dp->tx1_len = pkt_len;
+ dp->tx1_key = key;
+ dp->tx_next = dp->tx_buf2;
+ } else {
+ dp->tx2 = start_page;
+ dp->tx2_len = pkt_len;
+ dp->tx2_key = key;
+ dp->tx_next = dp->tx_buf1;
+ }
+
+#if DEBUG & 5
+ printf("TX prep page %d len %d\n", start_page, pkt_len);
+#endif
+
+ DP_OUT(base, DP_ISR, DP_ISR_RDC); /* Clear end of DMA */
+ {
+ /* Dummy read. The manual sez something slightly different, */
+ /* but the code is extended a bit to do what Hitachi's monitor */
+ /* does (i.e., also read data). */
+
+ cyg_uint16 tmp;
+ int len = 1;
+
+ DP_OUT(base, DP_RSAL, 0x100-len);
+ DP_OUT(base, DP_RSAH, (start_page-1) & 0xff);
+ DP_OUT(base, DP_RBCL, len);
+ DP_OUT(base, DP_RBCH, 0);
+ DP_OUT(base, DP_CR, DP_CR_PAGE0 | DP_CR_RDMA | DP_CR_START);
+ DP_IN_DATA(dp->data, tmp);
+ }
+
+#ifdef CYGHWR_NS_DP83902A_PLF_BROKEN_TX_DMA
+ /* Stall for a bit before continuing to work around random data */
+ /* corruption problems on some platforms. */
+ CYGACC_CALL_IF_DELAY_US(1);
+#endif
+
+ /* Send data to device buffer(s) */
+ DP_OUT(base, DP_RSAL, 0);
+ DP_OUT(base, DP_RSAH, start_page);
+ DP_OUT(base, DP_RBCL, pkt_len & 0xFF);
+ DP_OUT(base, DP_RBCH, pkt_len >> 8);
+ DP_OUT(base, DP_CR, DP_CR_WDMA | DP_CR_START);
+
+ /* Put data into buffer */
+#if DEBUG & 4
+ printf(" sg buf %08lx len %08x\n ", (unsigned long) data, len);
+ dx = 0;
+#endif
+ while (len > 0) {
+#if DEBUG & 4
+ printf(" %02x", *data);
+ if (0 == (++dx % 16)) printf("\n ");
+#endif
+ DP_OUT_DATA(dp->data, *data++);
+ len--;
+ }
+#if DEBUG & 4
+ printf("\n");
+#endif
+ if (total_len < pkt_len) {
+#if DEBUG & 4
+ printf(" + %d bytes of padding\n", pkt_len - total_len);
+#endif
+ /* Padding to 802.3 length was required */
+ for (i = total_len; i < pkt_len;) {
+ i++;
+ DP_OUT_DATA(dp->data, 0);
+ }
+ }
+
+#ifdef CYGHWR_NS_DP83902A_PLF_BROKEN_TX_DMA
+ /* After last data write, delay for a bit before accessing the */
+ /* device again, or we may get random data corruption in the last */
+ /* datum (on some platforms). */
+ CYGACC_CALL_IF_DELAY_US(1);
+#endif
+
+ /* Wait for DMA to complete */
+ do {
+ DP_IN(base, DP_ISR, isr);
+ } while ((isr & DP_ISR_RDC) == 0);
+ /* Then disable DMA */
+ DP_OUT(base, DP_CR, DP_CR_PAGE0 | DP_CR_NODMA | DP_CR_START);
+
+ /* Start transmit if not already going */
+ if (!dp->tx_started) {
+ if (start_page == dp->tx1) {
+ dp->tx_int = 1; /* Expecting interrupt from BUF1 */
+ } else {
+ dp->tx_int = 2; /* Expecting interrupt from BUF2 */
+ }
+ dp83902a_start_xmit(start_page, pkt_len);
+ }
+}
+
+/*
+ This function is called when a packet has been received. It's job is
+ to prepare to unload the packet from the hardware. Once the length of
+ the packet is known, the upper layer of the driver can be told. When
+ the upper layer is ready to unload the packet, the internal function
+ 'dp83902a_recv' will be called to actually fetch it from the hardware.
+*/
+static void
+dp83902a_RxEvent(void)
+{
+ struct dp83902a_priv_data *dp = (struct dp83902a_priv_data *) &nic;
+ cyg_uint8 *base = dp->base;
+ unsigned char rsr;
+ unsigned char rcv_hdr[4];
+ int i, len, pkt, cur;
+
+ DEBUG_FUNCTION();
+
+ DP_IN(base, DP_RSR, rsr);
+ while (true) {
+ /* Read incoming packet header */
+ DP_OUT(base, DP_CR, DP_CR_PAGE1 | DP_CR_NODMA | DP_CR_START);
+ DP_IN(base, DP_P1_CURP, cur);
+ DP_OUT(base, DP_P1_CR, DP_CR_PAGE0 | DP_CR_NODMA | DP_CR_START);
+ DP_IN(base, DP_BNDRY, pkt);
+
+ pkt += 1;
+ if (pkt == dp->rx_buf_end)
+ pkt = dp->rx_buf_start;
+
+ if (pkt == cur) {
+ break;
+ }
+ DP_OUT(base, DP_RBCL, sizeof(rcv_hdr));
+ DP_OUT(base, DP_RBCH, 0);
+ DP_OUT(base, DP_RSAL, 0);
+ DP_OUT(base, DP_RSAH, pkt);
+ if (dp->rx_next == pkt) {
+ if (cur == dp->rx_buf_start)
+ DP_OUT(base, DP_BNDRY, dp->rx_buf_end-1);
+ else
+ DP_OUT(base, DP_BNDRY, cur-1); /* Update pointer */
+ return;
+ }
+ dp->rx_next = pkt;
+ DP_OUT(base, DP_ISR, DP_ISR_RDC); /* Clear end of DMA */
+ DP_OUT(base, DP_CR, DP_CR_RDMA | DP_CR_START);
+#ifdef CYGHWR_NS_DP83902A_PLF_BROKEN_RX_DMA
+ CYGACC_CALL_IF_DELAY_US(10);
+#endif
+
+ for (i = 0; i < sizeof(rcv_hdr);) {
+ DP_IN_DATA(dp->data, rcv_hdr[i++]);
+ }
+
+#if DEBUG & 5
+ printf("rx hdr %02x %02x %02x %02x\n",
+ rcv_hdr[0], rcv_hdr[1], rcv_hdr[2], rcv_hdr[3]);
+#endif
+ len = ((rcv_hdr[3] << 8) | rcv_hdr[2]) - sizeof(rcv_hdr);
+ uboot_push_packet_len(len);
+ if (rcv_hdr[1] == dp->rx_buf_start)
+ DP_OUT(base, DP_BNDRY, dp->rx_buf_end-1);
+ else
+ DP_OUT(base, DP_BNDRY, rcv_hdr[1]-1); /* Update pointer */
+ }
+}
+
+/*
+ This function is called as a result of the "eth_drv_recv()" call above.
+ It's job is to actually fetch data for a packet from the hardware once
+ memory buffers have been allocated for the packet. Note that the buffers
+ may come in pieces, using a scatter-gather list. This allows for more
+ efficient processing in the upper layers of the stack.
+*/
+static void
+dp83902a_recv(unsigned char *data, int len)
+{
+ struct dp83902a_priv_data *dp = (struct dp83902a_priv_data *) &nic;
+ cyg_uint8 *base = dp->base;
+ int i, mlen;
+ cyg_uint8 saved_char = 0;
+ bool saved;
+#if DEBUG & 4
+ int dx;
+#endif
+
+ DEBUG_FUNCTION();
+
+#if DEBUG & 5
+ printf("Rx packet %d length %d\n", dp->rx_next, len);
+#endif
+
+ /* Read incoming packet data */
+ DP_OUT(base, DP_CR, DP_CR_PAGE0 | DP_CR_NODMA | DP_CR_START);
+ DP_OUT(base, DP_RBCL, len & 0xFF);
+ DP_OUT(base, DP_RBCH, len >> 8);
+ DP_OUT(base, DP_RSAL, 4); /* Past header */
+ DP_OUT(base, DP_RSAH, dp->rx_next);
+ DP_OUT(base, DP_ISR, DP_ISR_RDC); /* Clear end of DMA */
+ DP_OUT(base, DP_CR, DP_CR_RDMA | DP_CR_START);
+#ifdef CYGHWR_NS_DP83902A_PLF_BROKEN_RX_DMA
+ CYGACC_CALL_IF_DELAY_US(10);
+#endif
+
+ saved = false;
+ for (i = 0; i < 1; i++) {
+ if (data) {
+ mlen = len;
+#if DEBUG & 4
+ printf(" sg buf %08lx len %08x \n", (unsigned long) data, mlen);
+ dx = 0;
+#endif
+ while (0 < mlen) {
+ /* Saved byte from previous loop? */
+ if (saved) {
+ *data++ = saved_char;
+ mlen--;
+ saved = false;
+ continue;
+ }
+
+ {
+ cyg_uint8 tmp;
+ DP_IN_DATA(dp->data, tmp);
+#if DEBUG & 4
+ printf(" %02x", tmp);
+ if (0 == (++dx % 16)) printf("\n ");
+#endif
+ *data++ = tmp;;
+ mlen--;
+ }
+ }
+#if DEBUG & 4
+ printf("\n");
+#endif
+ }
+ }
+}
+
+static void
+dp83902a_TxEvent(void)
+{
+ struct dp83902a_priv_data *dp = (struct dp83902a_priv_data *) &nic;
+ cyg_uint8 *base = dp->base;
+ unsigned char tsr;
+ unsigned long key;
+
+ DEBUG_FUNCTION();
+
+ DP_IN(base, DP_TSR, tsr);
+ if (dp->tx_int == 1) {
+ key = dp->tx1_key;
+ dp->tx1 = 0;
+ } else {
+ key = dp->tx2_key;
+ dp->tx2 = 0;
+ }
+ /* Start next packet if one is ready */
+ dp->tx_started = false;
+ if (dp->tx1) {
+ dp83902a_start_xmit(dp->tx1, dp->tx1_len);
+ dp->tx_int = 1;
+ } else if (dp->tx2) {
+ dp83902a_start_xmit(dp->tx2, dp->tx2_len);
+ dp->tx_int = 2;
+ } else {
+ dp->tx_int = 0;
+ }
+ /* Tell higher level we sent this packet */
+ uboot_push_tx_done(key, 0);
+}
+
+/* Read the tally counters to clear them. Called in response to a CNT */
+/* interrupt. */
+static void
+dp83902a_ClearCounters(void)
+{
+ struct dp83902a_priv_data *dp = (struct dp83902a_priv_data *) &nic;
+ cyg_uint8 *base = dp->base;
+ cyg_uint8 cnt1, cnt2, cnt3;
+
+ DP_IN(base, DP_FER, cnt1);
+ DP_IN(base, DP_CER, cnt2);
+ DP_IN(base, DP_MISSED, cnt3);
+ DP_OUT(base, DP_ISR, DP_ISR_CNT);
+}
+
+/* Deal with an overflow condition. This code follows the procedure set */
+/* out in section 7.0 of the datasheet. */
+static void
+dp83902a_Overflow(void)
+{
+ struct dp83902a_priv_data *dp = (struct dp83902a_priv_data *)&nic;
+ cyg_uint8 *base = dp->base;
+ cyg_uint8 isr;
+
+ /* Issue a stop command and wait 1.6ms for it to complete. */
+ DP_OUT(base, DP_CR, DP_CR_STOP | DP_CR_NODMA);
+ CYGACC_CALL_IF_DELAY_US(1600);
+
+ /* Clear the remote byte counter registers. */
+ DP_OUT(base, DP_RBCL, 0);
+ DP_OUT(base, DP_RBCH, 0);
+
+ /* Enter loopback mode while we clear the buffer. */
+ DP_OUT(base, DP_TCR, DP_TCR_LOCAL);
+ DP_OUT(base, DP_CR, DP_CR_START | DP_CR_NODMA);
+
+ /* Read in as many packets as we can and acknowledge any and receive */
+ /* interrupts. Since the buffer has overflowed, a receive event of */
+ /* some kind will have occured. */
+ dp83902a_RxEvent();
+ DP_OUT(base, DP_ISR, DP_ISR_RxP|DP_ISR_RxE);
+
+ /* Clear the overflow condition and leave loopback mode. */
+ DP_OUT(base, DP_ISR, DP_ISR_OFLW);
+ DP_OUT(base, DP_TCR, DP_TCR_NORMAL);
+
+ /* If a transmit command was issued, but no transmit event has occured, */
+ /* restart it here. */
+ DP_IN(base, DP_ISR, isr);
+ if (dp->tx_started && !(isr & (DP_ISR_TxP|DP_ISR_TxE))) {
+ DP_OUT(base, DP_CR, DP_CR_NODMA | DP_CR_TXPKT | DP_CR_START);
+ }
+}
+
+static void
+dp83902a_poll(void)
+{
+ struct dp83902a_priv_data *dp = (struct dp83902a_priv_data *) &nic;
+ cyg_uint8 *base = dp->base;
+ unsigned char isr;
+
+ DP_OUT(base, DP_CR, DP_CR_NODMA | DP_CR_PAGE0 | DP_CR_START);
+ DP_IN(base, DP_ISR, isr);
+ while (0 != isr) {
+ /* The CNT interrupt triggers when the MSB of one of the error */
+ /* counters is set. We don't much care about these counters, but */
+ /* we should read their values to reset them. */
+ if (isr & DP_ISR_CNT) {
+ dp83902a_ClearCounters();
+ }
+ /* Check for overflow. It's a special case, since there's a */
+ /* particular procedure that must be followed to get back into */
+ /* a running state.a */
+ if (isr & DP_ISR_OFLW) {
+ dp83902a_Overflow();
+ } else {
+ /* Other kinds of interrupts can be acknowledged simply by */
+ /* clearing the relevant bits of the ISR. Do that now, then */
+ /* handle the interrupts we care about. */
+ DP_OUT(base, DP_ISR, isr); /* Clear set bits */
+ if (!dp->running) break; /* Is this necessary? */
+ /* Check for tx_started on TX event since these may happen */
+ /* spuriously it seems. */
+ if (isr & (DP_ISR_TxP|DP_ISR_TxE) && dp->tx_started) {
+ dp83902a_TxEvent();
+ }
+ if (isr & (DP_ISR_RxP|DP_ISR_RxE)) {
+ dp83902a_RxEvent();
+ }
+ }
+ DP_IN(base, DP_ISR, isr);
+ }
+}
+
+/* find prom (taken from pc_net_cs.c from Linux) */
+
+#include "8390.h"
+
+typedef struct hw_info_t {
+ u_int offset;
+ u_char a0, a1, a2;
+ u_int flags;
+} hw_info_t;
+
+#define DELAY_OUTPUT 0x01
+#define HAS_MISC_REG 0x02
+#define USE_BIG_BUF 0x04
+#define HAS_IBM_MISC 0x08
+#define IS_DL10019 0x10
+#define IS_DL10022 0x20
+#define HAS_MII 0x40
+#define USE_SHMEM 0x80 /* autodetected */
+
+#define AM79C9XX_HOME_PHY 0x00006B90 /* HomePNA PHY */
+#define AM79C9XX_ETH_PHY 0x00006B70 /* 10baseT PHY */
+#define MII_PHYID_REV_MASK 0xfffffff0
+#define MII_PHYID_REG1 0x02
+#define MII_PHYID_REG2 0x03
+
+static hw_info_t hw_info[] = {
+ { /* Accton EN2212 */ 0x0ff0, 0x00, 0x00, 0xe8, DELAY_OUTPUT },
+ { /* Allied Telesis LA-PCM */ 0x0ff0, 0x00, 0x00, 0xf4, 0 },
+ { /* APEX MultiCard */ 0x03f4, 0x00, 0x20, 0xe5, 0 },
+ { /* ASANTE FriendlyNet */ 0x4910, 0x00, 0x00, 0x94,
+ DELAY_OUTPUT | HAS_IBM_MISC },
+ { /* Danpex EN-6200P2 */ 0x0110, 0x00, 0x40, 0xc7, 0 },
+ { /* DataTrek NetCard */ 0x0ff0, 0x00, 0x20, 0xe8, 0 },
+ { /* Dayna CommuniCard E */ 0x0110, 0x00, 0x80, 0x19, 0 },
+ { /* D-Link DE-650 */ 0x0040, 0x00, 0x80, 0xc8, 0 },
+ { /* EP-210 Ethernet */ 0x0110, 0x00, 0x40, 0x33, 0 },
+ { /* EP4000 Ethernet */ 0x01c0, 0x00, 0x00, 0xb4, 0 },
+ { /* Epson EEN10B */ 0x0ff0, 0x00, 0x00, 0x48,
+ HAS_MISC_REG | HAS_IBM_MISC },
+ { /* ELECOM Laneed LD-CDWA */ 0xb8, 0x08, 0x00, 0x42, 0 },
+ { /* Hypertec Ethernet */ 0x01c0, 0x00, 0x40, 0x4c, 0 },
+ { /* IBM CCAE */ 0x0ff0, 0x08, 0x00, 0x5a,
+ HAS_MISC_REG | HAS_IBM_MISC },
+ { /* IBM CCAE */ 0x0ff0, 0x00, 0x04, 0xac,
+ HAS_MISC_REG | HAS_IBM_MISC },
+ { /* IBM CCAE */ 0x0ff0, 0x00, 0x06, 0x29,
+ HAS_MISC_REG | HAS_IBM_MISC },
+ { /* IBM FME */ 0x0374, 0x08, 0x00, 0x5a,
+ HAS_MISC_REG | HAS_IBM_MISC },
+ { /* IBM FME */ 0x0374, 0x00, 0x04, 0xac,
+ HAS_MISC_REG | HAS_IBM_MISC },
+ { /* Kansai KLA-PCM/T */ 0x0ff0, 0x00, 0x60, 0x87,
+ HAS_MISC_REG | HAS_IBM_MISC },
+ { /* NSC DP83903 */ 0x0374, 0x08, 0x00, 0x17,
+ HAS_MISC_REG | HAS_IBM_MISC },
+ { /* NSC DP83903 */ 0x0374, 0x00, 0xc0, 0xa8,
+ HAS_MISC_REG | HAS_IBM_MISC },
+ { /* NSC DP83903 */ 0x0374, 0x00, 0xa0, 0xb0,
+ HAS_MISC_REG | HAS_IBM_MISC },
+ { /* NSC DP83903 */ 0x0198, 0x00, 0x20, 0xe0,
+ HAS_MISC_REG | HAS_IBM_MISC },
+ { /* I-O DATA PCLA/T */ 0x0ff0, 0x00, 0xa0, 0xb0, 0 },
+ { /* Katron PE-520 */ 0x0110, 0x00, 0x40, 0xf6, 0 },
+ { /* Kingston KNE-PCM/x */ 0x0ff0, 0x00, 0xc0, 0xf0,
+ HAS_MISC_REG | HAS_IBM_MISC },
+ { /* Kingston KNE-PCM/x */ 0x0ff0, 0xe2, 0x0c, 0x0f,
+ HAS_MISC_REG | HAS_IBM_MISC },
+ { /* Kingston KNE-PC2 */ 0x0180, 0x00, 0xc0, 0xf0, 0 },
+ { /* Maxtech PCN2000 */ 0x5000, 0x00, 0x00, 0xe8, 0 },
+ { /* NDC Instant-Link */ 0x003a, 0x00, 0x80, 0xc6, 0 },
+ { /* NE2000 Compatible */ 0x0ff0, 0x00, 0xa0, 0x0c, 0 },
+ { /* Network General Sniffer */ 0x0ff0, 0x00, 0x00, 0x65,
+ HAS_MISC_REG | HAS_IBM_MISC },
+ { /* Panasonic VEL211 */ 0x0ff0, 0x00, 0x80, 0x45,
+ HAS_MISC_REG | HAS_IBM_MISC },
+ { /* PreMax PE-200 */ 0x07f0, 0x00, 0x20, 0xe0, 0 },
+ { /* RPTI EP400 */ 0x0110, 0x00, 0x40, 0x95, 0 },
+ { /* SCM Ethernet */ 0x0ff0, 0x00, 0x20, 0xcb, 0 },
+ { /* Socket EA */ 0x4000, 0x00, 0xc0, 0x1b,
+ DELAY_OUTPUT | HAS_MISC_REG | USE_BIG_BUF },
+ { /* Socket LP-E CF+ */ 0x01c0, 0x00, 0xc0, 0x1b, 0 },
+ { /* SuperSocket RE450T */ 0x0110, 0x00, 0xe0, 0x98, 0 },
+ { /* Volktek NPL-402CT */ 0x0060, 0x00, 0x40, 0x05, 0 },
+ { /* NEC PC-9801N-J12 */ 0x0ff0, 0x00, 0x00, 0x4c, 0 },
+ { /* PCMCIA Technology OEM */ 0x01c8, 0x00, 0xa0, 0x0c, 0 }
+};
+
+#define NR_INFO (sizeof(hw_info)/sizeof(hw_info_t))
+
+static hw_info_t default_info = { 0, 0, 0, 0, 0 };
+
+unsigned char dev_addr[6];
+
+#define PCNET_CMD 0x00
+#define PCNET_DATAPORT 0x10 /* NatSemi-defined port window offset. */
+#define PCNET_RESET 0x1f /* Issue a read to reset, a write to clear. */
+#define PCNET_MISC 0x18 /* For IBM CCAE and Socket EA cards */
+
+unsigned long nic_base;
+
+static void pcnet_reset_8390(void)
+{
+ int i, r;
+
+ PRINTK("nic base is %lx\n", nic_base);
+
+#if 1
+ n2k_outb(E8390_NODMA+E8390_PAGE0+E8390_STOP, E8390_CMD);
+ PRINTK("cmd (at %lx) is %x\n", nic_base+ E8390_CMD, n2k_inb(E8390_CMD));
+ n2k_outb(E8390_NODMA+E8390_PAGE1+E8390_STOP, E8390_CMD);
+ PRINTK("cmd (at %lx) is %x\n", nic_base+ E8390_CMD, n2k_inb(E8390_CMD));
+ n2k_outb(E8390_NODMA+E8390_PAGE0+E8390_STOP, E8390_CMD);
+ PRINTK("cmd (at %lx) is %x\n", nic_base+ E8390_CMD, n2k_inb(E8390_CMD));
+#endif
+ n2k_outb(E8390_NODMA+E8390_PAGE0+E8390_STOP, E8390_CMD);
+
+ n2k_outb(n2k_inb(nic_base + PCNET_RESET), PCNET_RESET);
+
+ for (i = 0; i < 100; i++) {
+ if ((r = (n2k_inb(EN0_ISR) & ENISR_RESET)) != 0)
+ break;
+ PRINTK("got %x in reset\n", r);
+ my_udelay(100);
+ }
+ n2k_outb(ENISR_RESET, EN0_ISR); /* Ack intr. */
+
+ if (i == 100)
+ printf("pcnet_reset_8390() did not complete.\n");
+} /* pcnet_reset_8390 */
+
+static hw_info_t * get_prom(void ) {
+ unsigned char prom[32];
+ int i, j;
+ struct {
+ u_char value, offset;
+ } program_seq[] = {
+ {E8390_NODMA+E8390_PAGE0+E8390_STOP, E8390_CMD}, /* Select page 0*/
+ {0x48, EN0_DCFG}, /* Set byte-wide (0x48) access. */
+ {0x00, EN0_RCNTLO}, /* Clear the count regs. */
+ {0x00, EN0_RCNTHI},
+ {0x00, EN0_IMR}, /* Mask completion irq. */
+ {0xFF, EN0_ISR},
+ {E8390_RXOFF, EN0_RXCR}, /* 0x20 Set to monitor */
+ {E8390_TXOFF, EN0_TXCR}, /* 0x02 and loopback mode. */
+ {32, EN0_RCNTLO},
+ {0x00, EN0_RCNTHI},
+ {0x00, EN0_RSARLO}, /* DMA starting at 0x0000. */
+ {0x00, EN0_RSARHI},
+ {E8390_RREAD+E8390_START, E8390_CMD},
+ };
+
+ PRINTK("trying to get MAC via prom reading\n");
+
+ pcnet_reset_8390();
+
+ mdelay(10);
+
+ for (i = 0; i < sizeof(program_seq)/sizeof(program_seq[0]); i++)
+ n2k_outb(program_seq[i].value, program_seq[i].offset);
+
+ PRINTK("PROM:");
+ for (i = 0; i < 32; i++) {
+ prom[i] = n2k_inb(PCNET_DATAPORT);
+ PRINTK(" %02x", prom[i]);
+ }
+ PRINTK("\n");
+ for (i = 0; i < NR_INFO; i++) {
+ if ((prom[0] == hw_info[i].a0) &&
+ (prom[2] == hw_info[i].a1) &&
+ (prom[4] == hw_info[i].a2)) {
+ PRINTK("matched board %d\n", i);
+ break;
+ }
+ }
+ if ((i < NR_INFO) || ((prom[28] == 0x57) && (prom[30] == 0x57))) {
+ for (j = 0; j < 6; j++)
+ dev_addr[j] = prom[j<<1];
+ PRINTK("on exit i is %d/%ld\n", i, NR_INFO);
+ PRINTK("MAC address is %02x:%02x:%02x:%02x:%02x:%02x\n",
+ dev_addr[0],dev_addr[1],dev_addr[2],dev_addr[3],dev_addr[4],dev_addr[5]);
+ return (i < NR_INFO) ? hw_info+i : &default_info;
+ }
+ return NULL;
+}
+
+/* U-boot specific routines */
+
+#define NB 5
+
+static unsigned char *pbuf = NULL;
+static int plen[NB];
+static int nrx = 0;
+
+static int pkey = -1;
+
+void uboot_push_packet_len(int len) {
+ PRINTK("pushed len = %d, nrx = %d\n", len, nrx);
+ if (len>=2000) {
+ printf("NE2000: packet too big\n");
+ return;
+ }
+ if (nrx >= NB) {
+ printf("losing packets in rx\n");
+ return;
+ }
+ plen[nrx] = len;
+ dp83902a_recv(&pbuf[nrx*2000], len);
+ nrx++;
+}
+
+void uboot_push_tx_done(int key, int val) {
+ PRINTK("pushed key = %d\n", key);
+ pkey = key;
+}
+
+int eth_init(bd_t *bd) {
+ static hw_info_t * r;
+ char ethaddr[20];
+
+ PRINTK("### eth_init\n");
+
+ if (!pbuf) {
+ pbuf = malloc(NB*2000);
+ if (!pbuf) {
+ printf("Cannot allocate rx buffers\n");
+ return -1;
+ }
+ }
+
+#ifdef CONFIG_DRIVER_NE2000_CCR
+ {
+ volatile unsigned char *p = (volatile unsigned char *) CONFIG_DRIVER_NE2000_CCR;
+
+ PRINTK("CCR before is %x\n", *p);
+ *p = CONFIG_DRIVER_NE2000_VAL;
+ PRINTK("CCR after is %x\n", *p);
+ }
+#endif
+
+ nic_base = CONFIG_DRIVER_NE2000_BASE;
+ nic.base = (cyg_uint8 *) CONFIG_DRIVER_NE2000_BASE;
+
+ r = get_prom();
+ if (!r)
+ return -1;
+
+ sprintf (ethaddr, "%02X:%02X:%02X:%02X:%02X:%02X",
+ dev_addr[0], dev_addr[1],
+ dev_addr[2], dev_addr[3],
+ dev_addr[4], dev_addr[5]) ;
+ PRINTK("Set environment from HW MAC addr = \"%s\"\n", ethaddr);
+ setenv ("ethaddr", ethaddr);
+
+
+#define DP_DATA 0x10
+ nic.data = nic.base + DP_DATA;
+ nic.tx_buf1 = 0x40;
+ nic.tx_buf2 = 0x48;
+ nic.rx_buf_start = 0x50;
+ nic.rx_buf_end = 0x80;
+
+ if (dp83902a_init() == false)
+ return -1;
+ dp83902a_start(dev_addr);
+ return 0;
+}
+
+void eth_halt() {
+
+ PRINTK("### eth_halt\n");
+
+ dp83902a_stop();
+}
+
+int eth_rx() {
+ int j, tmo;
+
+ PRINTK("### eth_rx\n");
+
+ tmo = get_timer (0) + TOUT * CFG_HZ;
+ while(1) {
+ dp83902a_poll();
+ if (nrx > 0) {
+ for(j=0; j<nrx; j++) {
+ NetReceive(&pbuf[j*2000], plen[j]);
+ }
+ nrx = 0;
+ return 1;
+ }
+ if (get_timer (0) >= tmo) {
+ printf("timeout during rx\n");
+ return 0;
+ }
+ }
+ return 0;
+}
+
+int eth_send(volatile void *packet, int length) {
+ int tmo;
+
+ PRINTK("### eth_send\n");
+
+ pkey = -1;
+
+ dp83902a_send((unsigned char *) packet, length, 666);
+ tmo = get_timer (0) + TOUT * CFG_HZ;
+ while(1) {
+ dp83902a_poll();
+ if (pkey != -1) {
+ PRINTK("Packet sucesfully sent\n");
+ return 0;
+ }
+ if (get_timer (0) >= tmo) {
+ printf("transmission error (timoeut)\n");
+ return 0;
+ }
+
+ }
+ return 0;
+}
+
+#endif
--- /dev/null
+/*
+Ported to U-Boot by Christian Pellegrin <chri@ascensit.com>
+
+Based on sources from the Linux kernel (pcnet_cs.c, 8390.h) and
+eCOS(if_dp83902a.c, if_dp83902a.h). Both of these 2 wonderful world
+are GPL, so this is, of course, GPL.
+
+
+==========================================================================
+
+ dev/dp83902a.h
+
+ National Semiconductor DP83902a ethernet chip
+
+==========================================================================
+####ECOSGPLCOPYRIGHTBEGIN####
+ -------------------------------------------
+ This file is part of eCos, the Embedded Configurable Operating System.
+ Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
+
+ eCos is free software; you can redistribute it and/or modify it under
+ the terms of the GNU General Public License as published by the Free
+ Software Foundation; either version 2 or (at your option) any later version.
+
+ eCos is distributed in the hope that it will be useful, but WITHOUT ANY
+ WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ for more details.
+
+ You should have received a copy of the GNU General Public License along
+ with eCos; if not, write to the Free Software Foundation, Inc.,
+ 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+
+ As a special exception, if other files instantiate templates or use macros
+ or inline functions from this file, or you compile this file and link it
+ with other works to produce a work based on this file, this file does not
+ by itself cause the resulting work to be covered by the GNU General Public
+ License. However the source code for this file must still be made available
+ in accordance with section (3) of the GNU General Public License.
+
+ This exception does not invalidate any other reasons why a work based on
+ this file might be covered by the GNU General Public License.
+
+ Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.
+ at http://sources.redhat.com/ecos/ecos-license/ */
+ -------------------------------------------
+####ECOSGPLCOPYRIGHTEND####
+####BSDCOPYRIGHTBEGIN####
+
+ -------------------------------------------
+
+ Portions of this software may have been derived from OpenBSD or other sources,
+ and are covered by the appropriate copyright disclaimers included herein.
+
+ -------------------------------------------
+
+####BSDCOPYRIGHTEND####
+==========================================================================
+#####DESCRIPTIONBEGIN####
+
+ Author(s): gthomas
+ Contributors: gthomas, jskov
+ Date: 2001-06-13
+ Purpose:
+ Description:
+
+####DESCRIPTIONEND####
+
+==========================================================================
+
+*/
+
+/*
+ ------------------------------------------------------------------------
+ Macros for accessing DP registers
+ These can be overridden by the platform header
+*/
+
+#define DP_IN(_b_, _o_, _d_) (_d_) = *( (volatile unsigned char *) ((_b_)+(_o_)))
+#define DP_OUT(_b_, _o_, _d_) *( (volatile unsigned char *) ((_b_)+(_o_))) = (_d_)
+
+#define DP_IN_DATA(_b_, _d_) (_d_) = *( (volatile unsigned char *) ((_b_)))
+#define DP_OUT_DATA(_b_, _d_) *( (volatile unsigned char *) ((_b_))) = (_d_)
+
+
+/* here is all the data */
+
+#define cyg_uint8 unsigned char
+#define cyg_uint16 unsigned short
+#define bool int
+
+#define false 0
+#define true 1
+
+#define CYGHWR_NS_DP83902A_PLF_BROKEN_TX_DMA 1
+#define CYGACC_CALL_IF_DELAY_US(X) my_udelay(X)
+
+typedef struct dp83902a_priv_data {
+ cyg_uint8* base;
+ cyg_uint8* data;
+ cyg_uint8* reset;
+ int tx_next; /* First free Tx page */
+ int tx_int; /* Expecting interrupt from this buffer */
+ int rx_next; /* First free Rx page */
+ int tx1, tx2; /* Page numbers for Tx buffers */
+ unsigned long tx1_key, tx2_key; /* Used to ack when packet sent */
+ int tx1_len, tx2_len;
+ bool tx_started, running, hardwired_esa;
+ cyg_uint8 esa[6];
+ void* plf_priv;
+
+ /* Buffer allocation */
+ int tx_buf1, tx_buf2;
+ int rx_buf_start, rx_buf_end;
+} dp83902a_priv_data_t;
+
+/*
+ ------------------------------------------------------------------------
+ Some forward declarations
+*/
+static void dp83902a_poll(void);
+
+/* ------------------------------------------------------------------------ */
+/* Register offsets */
+
+#define DP_CR 0x00
+#define DP_CLDA0 0x01
+#define DP_PSTART 0x01 /* write */
+#define DP_CLDA1 0x02
+#define DP_PSTOP 0x02 /* write */
+#define DP_BNDRY 0x03
+#define DP_TSR 0x04
+#define DP_TPSR 0x04 /* write */
+#define DP_NCR 0x05
+#define DP_TBCL 0x05 /* write */
+#define DP_FIFO 0x06
+#define DP_TBCH 0x06 /* write */
+#define DP_ISR 0x07
+#define DP_CRDA0 0x08
+#define DP_RSAL 0x08 /* write */
+#define DP_CRDA1 0x09
+#define DP_RSAH 0x09 /* write */
+#define DP_RBCL 0x0a /* write */
+#define DP_RBCH 0x0b /* write */
+#define DP_RSR 0x0c
+#define DP_RCR 0x0c /* write */
+#define DP_FER 0x0d
+#define DP_TCR 0x0d /* write */
+#define DP_CER 0x0e
+#define DP_DCR 0x0e /* write */
+#define DP_MISSED 0x0f
+#define DP_IMR 0x0f /* write */
+#define DP_DATAPORT 0x10 /* "eprom" data port */
+
+#define DP_P1_CR 0x00
+#define DP_P1_PAR0 0x01
+#define DP_P1_PAR1 0x02
+#define DP_P1_PAR2 0x03
+#define DP_P1_PAR3 0x04
+#define DP_P1_PAR4 0x05
+#define DP_P1_PAR5 0x06
+#define DP_P1_CURP 0x07
+#define DP_P1_MAR0 0x08
+#define DP_P1_MAR1 0x09
+#define DP_P1_MAR2 0x0a
+#define DP_P1_MAR3 0x0b
+#define DP_P1_MAR4 0x0c
+#define DP_P1_MAR5 0x0d
+#define DP_P1_MAR6 0x0e
+#define DP_P1_MAR7 0x0f
+
+#define DP_P2_CR 0x00
+#define DP_P2_PSTART 0x01
+#define DP_P2_CLDA0 0x01 /* write */
+#define DP_P2_PSTOP 0x02
+#define DP_P2_CLDA1 0x02 /* write */
+#define DP_P2_RNPP 0x03
+#define DP_P2_TPSR 0x04
+#define DP_P2_LNPP 0x05
+#define DP_P2_ACH 0x06
+#define DP_P2_ACL 0x07
+#define DP_P2_RCR 0x0c
+#define DP_P2_TCR 0x0d
+#define DP_P2_DCR 0x0e
+#define DP_P2_IMR 0x0f
+
+/* Command register - common to all pages */
+
+#define DP_CR_STOP 0x01 /* Stop: software reset */
+#define DP_CR_START 0x02 /* Start: initialize device */
+#define DP_CR_TXPKT 0x04 /* Transmit packet */
+#define DP_CR_RDMA 0x08 /* Read DMA (recv data from device) */
+#define DP_CR_WDMA 0x10 /* Write DMA (send data to device) */
+#define DP_CR_SEND 0x18 /* Send packet */
+#define DP_CR_NODMA 0x20 /* Remote (or no) DMA */
+#define DP_CR_PAGE0 0x00 /* Page select */
+#define DP_CR_PAGE1 0x40
+#define DP_CR_PAGE2 0x80
+#define DP_CR_PAGEMSK 0x3F /* Used to mask out page bits */
+
+/* Data configuration register */
+
+#define DP_DCR_WTS 0x01 /* 1=16 bit word transfers */
+#define DP_DCR_BOS 0x02 /* 1=Little Endian */
+#define DP_DCR_LAS 0x04 /* 1=Single 32 bit DMA mode */
+#define DP_DCR_LS 0x08 /* 1=normal mode, 0=loopback */
+#define DP_DCR_ARM 0x10 /* 0=no send command (program I/O) */
+#define DP_DCR_FIFO_1 0x00 /* FIFO threshold */
+#define DP_DCR_FIFO_2 0x20
+#define DP_DCR_FIFO_4 0x40
+#define DP_DCR_FIFO_6 0x60
+
+#define DP_DCR_INIT (DP_DCR_LS|DP_DCR_FIFO_4)
+
+/* Interrupt status register */
+
+#define DP_ISR_RxP 0x01 /* Packet received */
+#define DP_ISR_TxP 0x02 /* Packet transmitted */
+#define DP_ISR_RxE 0x04 /* Receive error */
+#define DP_ISR_TxE 0x08 /* Transmit error */
+#define DP_ISR_OFLW 0x10 /* Receive overflow */
+#define DP_ISR_CNT 0x20 /* Tally counters need emptying */
+#define DP_ISR_RDC 0x40 /* Remote DMA complete */
+#define DP_ISR_RESET 0x80 /* Device has reset (shutdown, error) */
+
+/* Interrupt mask register */
+
+#define DP_IMR_RxP 0x01 /* Packet received */
+#define DP_IMR_TxP 0x02 /* Packet transmitted */
+#define DP_IMR_RxE 0x04 /* Receive error */
+#define DP_IMR_TxE 0x08 /* Transmit error */
+#define DP_IMR_OFLW 0x10 /* Receive overflow */
+#define DP_IMR_CNT 0x20 /* Tall counters need emptying */
+#define DP_IMR_RDC 0x40 /* Remote DMA complete */
+
+#define DP_IMR_All 0x3F /* Everything but remote DMA */
+
+/* Receiver control register */
+
+#define DP_RCR_SEP 0x01 /* Save bad(error) packets */
+#define DP_RCR_AR 0x02 /* Accept runt packets */
+#define DP_RCR_AB 0x04 /* Accept broadcast packets */
+#define DP_RCR_AM 0x08 /* Accept multicast packets */
+#define DP_RCR_PROM 0x10 /* Promiscuous mode */
+#define DP_RCR_MON 0x20 /* Monitor mode - 1=accept no packets */
+
+/* Receiver status register */
+
+#define DP_RSR_RxP 0x01 /* Packet received */
+#define DP_RSR_CRC 0x02 /* CRC error */
+#define DP_RSR_FRAME 0x04 /* Framing error */
+#define DP_RSR_FO 0x08 /* FIFO overrun */
+#define DP_RSR_MISS 0x10 /* Missed packet */
+#define DP_RSR_PHY 0x20 /* 0=pad match, 1=mad match */
+#define DP_RSR_DIS 0x40 /* Receiver disabled */
+#define DP_RSR_DFR 0x80 /* Receiver processing deferred */
+
+/* Transmitter control register */
+
+#define DP_TCR_NOCRC 0x01 /* 1=inhibit CRC */
+#define DP_TCR_NORMAL 0x00 /* Normal transmitter operation */
+#define DP_TCR_LOCAL 0x02 /* Internal NIC loopback */
+#define DP_TCR_INLOOP 0x04 /* Full internal loopback */
+#define DP_TCR_OUTLOOP 0x08 /* External loopback */
+#define DP_TCR_ATD 0x10 /* Auto transmit disable */
+#define DP_TCR_OFFSET 0x20 /* Collision offset adjust */
+
+/* Transmit status register */
+
+#define DP_TSR_TxP 0x01 /* Packet transmitted */
+#define DP_TSR_COL 0x04 /* Collision (at least one) */
+#define DP_TSR_ABT 0x08 /* Aborted because of too many collisions */
+#define DP_TSR_CRS 0x10 /* Lost carrier */
+#define DP_TSR_FU 0x20 /* FIFO underrun */
+#define DP_TSR_CDH 0x40 /* Collision Detect Heartbeat */
+#define DP_TSR_OWC 0x80 /* Collision outside normal window */
+
+#define IEEE_8023_MAX_FRAME 1518 /* Largest possible ethernet frame */
+#define IEEE_8023_MIN_FRAME 64 /* Smallest possible ethernet frame */
void NS16550_init (NS16550_t com_port, int baud_divisor)
{
com_port->ier = 0x00;
-#ifdef CONFIG_OMAP1510
+#ifdef CONFIG_OMAP
com_port->mdr1 = 0x7; /* mode select reset TL16C750*/
#endif
com_port->lcr = LCR_BKSE | LCRVAL;
com_port->lcr = LCRVAL;
com_port->mcr = MCRVAL;
com_port->fcr = FCRVAL;
-#if defined(CONFIG_OMAP1510) || defined(CONFIG_OMAP1610) || defined(CONFIG_OMAP730)
- com_port->mdr1 = 0; /* select uart mode */
+#if defined(CONFIG_OMAP)
+#if defined(CONFIG_APTIX)
+ com_port->mdr1 = 3; /* /13 mode so Aptix 6MHz can hit 115200 */
+#else
+ com_port->mdr1 = 0; /* /16 is proper to hit 115200 with 48MHz */
+#endif
#endif
}
--- /dev/null
+/*
+ * Basic I2C functions
+ *
+ * Copyright (c) 2004 Texas Instruments
+ *
+ * This package is free software; you can redistribute it and/or
+ * modify it under the terms of the license found in the file
+ * named COPYING that should have accompanied this file.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ *
+ * Author: Jian Zhang jzhang@ti.com, Texas Instruments
+ *
+ * Copyright (c) 2003 Wolfgang Denk, wd@denx.de
+ * Rewritten to fit into the current U-Boot framework
+ *
+ * Adapted for OMAP2420 I2C, r-woodruff2@ti.com
+ *
+ */
+
+#include <common.h>
+#include <asm/arch/i2c.h>
+#include <asm/io.h>
+
+#define inw(a) __raw_readw(a)
+#define outw(a,v) __raw_writew(a,v)
+
+#ifdef CONFIG_DRIVER_OMAP24XX_I2C
+
+static void wait_for_bb (void);
+static u16 wait_for_pin (void);
+void flush_fifo(void);
+
+void i2c_init (int speed, int slaveadd)
+{
+ u16 scl;
+
+ if (inw (I2C_CON) & I2C_CON_EN) {
+ outw (0, I2C_CON);
+ udelay (50000);
+ }
+
+ /* 12Mhz I2C module clock */
+ outw (0, I2C_PSC);
+ speed = speed/1000; /* 100 or 400 */
+ scl = ((12000/(speed*2)) - 7); /* use 7 when PSC = 0 */
+ outw (scl, I2C_SCLL);
+ outw (scl, I2C_SCLH);
+ /* own address */
+ outw (slaveadd, I2C_OA);
+ outw (I2C_CON_EN, I2C_CON);
+ outw (0, I2C_CNT);
+ /* have to enable intrrupts or OMAP i2c module doesn't work */
+ outw (I2C_IE_XRDY_IE | I2C_IE_RRDY_IE | I2C_IE_ARDY_IE |
+ I2C_IE_NACK_IE | I2C_IE_AL_IE, I2C_IE);
+ udelay (1000);
+}
+
+static int i2c_read_byte (u8 devaddr, u8 regoffset, u8 * value)
+{
+ int i2c_error = 0;
+ u16 status;
+
+ /* wait until bus not busy */
+ wait_for_bb ();
+
+ /* one byte only */
+ outw (1, I2C_CNT);
+ /* set slave address */
+ outw (devaddr, I2C_SA);
+ /* no stop bit needed here */
+ outw (I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_TRX, I2C_CON);
+
+ status = wait_for_pin ();
+
+ if (status & I2C_STAT_XRDY) {
+ /* Important: have to use byte access */
+ *(volatile u8 *) (I2C_DATA) = regoffset;
+ udelay (20000);
+ if (inw (I2C_STAT) & I2C_STAT_NACK) {
+ i2c_error = 1;
+ }
+ } else {
+ i2c_error = 1;
+ }
+
+ if (!i2c_error) {
+ /* free bus, otherwise we can't use a combined transction */
+ outw (0, I2C_CON);
+ while (inw (I2C_STAT) || (inw (I2C_CON) & I2C_CON_MST)) {
+ udelay (10000);
+ /* Have to clear pending interrupt to clear I2C_STAT */
+ outw (0xFFFF, I2C_STAT);
+ }
+
+ wait_for_bb ();
+ /* set slave address */
+ outw (devaddr, I2C_SA);
+ /* read one byte from slave */
+ outw (1, I2C_CNT);
+ /* need stop bit here */
+ outw (I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_STP,
+ I2C_CON);
+
+ status = wait_for_pin ();
+ if (status & I2C_STAT_RRDY) {
+ *value = inw (I2C_DATA);
+ udelay (20000);
+ } else {
+ i2c_error = 1;
+ }
+
+ if (!i2c_error) {
+ outw (I2C_CON_EN, I2C_CON);
+ while (inw (I2C_STAT)
+ || (inw (I2C_CON) & I2C_CON_MST)) {
+ udelay (10000);
+ outw (0xFFFF, I2C_STAT);
+ }
+ }
+ }
+ flush_fifo();
+ outw (0xFFFF, I2C_STAT);
+ outw (0, I2C_CNT);
+ return i2c_error;
+}
+
+static int i2c_write_byte (u8 devaddr, u8 regoffset, u8 value)
+{
+ int i2c_error = 0;
+ u16 status, stat;
+
+ /* wait until bus not busy */
+ wait_for_bb ();
+
+ /* two bytes */
+ outw (2, I2C_CNT);
+ /* set slave address */
+ outw (devaddr, I2C_SA);
+ /* stop bit needed here */
+ outw (I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_TRX |
+ I2C_CON_STP, I2C_CON);
+
+ /* wait until state change */
+ status = wait_for_pin ();
+
+ if (status & I2C_STAT_XRDY) {
+ /* send out two bytes */
+ outw ((value << 8) + regoffset, I2C_DATA);
+ /* must have enough delay to allow BB bit to go low */
+ udelay (50000);
+ if (inw (I2C_STAT) & I2C_STAT_NACK) {
+ i2c_error = 1;
+ }
+ } else {
+ i2c_error = 1;
+ }
+
+ if (!i2c_error) {
+ outw (I2C_CON_EN, I2C_CON);
+ while ((stat = inw (I2C_STAT)) || (inw (I2C_CON) & I2C_CON_MST)) {
+ udelay (1000);
+ /* have to read to clear intrrupt */
+ outw (0xFFFF, I2C_STAT);
+ }
+ }
+ flush_fifo();
+ outw (0xFFFF, I2C_STAT);
+ outw (0, I2C_CNT);
+ return i2c_error;
+}
+
+void flush_fifo(void)
+{ u16 stat;
+
+ /* note: if you try and read data when its not there or ready
+ * you get a bus error
+ */
+ while(1){
+ stat = inw(I2C_STAT);
+ if(stat == I2C_STAT_RRDY){
+ inw(I2C_DATA);
+ outw(I2C_STAT_RRDY,I2C_STAT);
+ udelay(1000);
+ }else
+ break;
+ }
+}
+
+int i2c_probe (uchar chip)
+{
+ int res = 1; /* default = fail */
+
+ if (chip == inw (I2C_OA)) {
+ return res;
+ }
+
+ /* wait until bus not busy */
+ wait_for_bb ();
+
+ /* try to read one byte */
+ outw (1, I2C_CNT);
+ /* set slave address */
+ outw (chip, I2C_SA);
+ /* stop bit needed here */
+ outw (I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_STP, I2C_CON);
+ /* enough delay for the NACK bit set */
+ udelay (50000);
+
+ if (!(inw (I2C_STAT) & I2C_STAT_NACK)) {
+ res = 0; /* success case */
+ flush_fifo();
+ outw(0xFFFF, I2C_STAT);
+ } else {
+ outw(0xFFFF, I2C_STAT); /* failue, clear sources*/
+ outw (inw (I2C_CON) | I2C_CON_STP, I2C_CON); /* finish up xfer */
+ udelay(20000);
+ wait_for_bb ();
+ }
+ flush_fifo();
+ outw (0, I2C_CNT); /* don't allow any more data in...we don't want it.*/
+ outw(0xFFFF, I2C_STAT);
+ return res;
+}
+
+int i2c_read (uchar chip, uint addr, int alen, uchar * buffer, int len)
+{
+ int i;
+
+ if (alen > 1) {
+ printf ("I2C read: addr len %d not supported\n", alen);
+ return 1;
+ }
+
+ if (addr + len > 256) {
+ printf ("I2C read: address out of range\n");
+ return 1;
+ }
+
+ for (i = 0; i < len; i++) {
+ if (i2c_read_byte (chip, addr + i, &buffer[i])) {
+ printf ("I2C read: I/O error\n");
+ i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE);
+ return 1;
+ }
+ }
+
+ return 0;
+}
+
+int i2c_write (uchar chip, uint addr, int alen, uchar * buffer, int len)
+{
+ int i;
+
+ if (alen > 1) {
+ printf ("I2C read: addr len %d not supported\n", alen);
+ return 1;
+ }
+
+ if (addr + len > 256) {
+ printf ("I2C read: address out of range\n");
+ return 1;
+ }
+
+ for (i = 0; i < len; i++) {
+ if (i2c_write_byte (chip, addr + i, buffer[i])) {
+ printf ("I2C read: I/O error\n");
+ i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE);
+ return 1;
+ }
+ }
+
+ return 0;
+}
+
+static void wait_for_bb (void)
+{
+ int timeout = 10;
+ u16 stat;
+
+ outw(0xFFFF, I2C_STAT); /* clear current interruts...*/
+ while ((stat = inw (I2C_STAT) & I2C_STAT_BB) && timeout--) {
+ outw (stat, I2C_STAT);
+ udelay (50000);
+ }
+
+ if (timeout <= 0) {
+ printf ("timed out in wait_for_bb: I2C_STAT=%x\n",
+ inw (I2C_STAT));
+ }
+ outw(0xFFFF, I2C_STAT); /* clear delayed stuff*/
+}
+
+static u16 wait_for_pin (void)
+{
+ u16 status;
+ int timeout = 10;
+
+ do {
+ udelay (1000);
+ status = inw (I2C_STAT);
+ } while ( !(status &
+ (I2C_STAT_ROVR | I2C_STAT_XUDF | I2C_STAT_XRDY |
+ I2C_STAT_RRDY | I2C_STAT_ARDY | I2C_STAT_NACK |
+ I2C_STAT_AL)) && timeout--);
+
+ if (timeout <= 0) {
+ printf ("timed out in wait_for_pin: I2C_STAT=%x\n",
+ inw (I2C_STAT));
+ outw(0xFFFF, I2C_STAT);
+}
+ return status;
+}
+
+#endif /* CONFIG_DRIVER_OMAP24XX_I2C */
return (26); /* return 26 for base divisor */
}
#endif
- return (CFG_NS16550_CLK / 16 / gd->baudrate);
+
+#ifdef CONFIG_APTIX
+#define MODE_X_DIV 13
+#else
+#define MODE_X_DIV 16
+#endif
+ return (CFG_NS16550_CLK / MODE_X_DIV / gd->baudrate);
+
}
int serial_init (void)
--- /dev/null
+/* bits.h
+ * Copyright (c) 2004 Texas Instruments
+ *
+ * This package is free software; you can redistribute it and/or
+ * modify it under the terms of the license found in the file
+ * named COPYING that should have accompanied this file.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+#ifndef __bits_h
+#define __bits_h 1
+
+#define BIT0 (1<<0)
+#define BIT1 (1<<1)
+#define BIT2 (1<<2)
+#define BIT3 (1<<3)
+#define BIT4 (1<<4)
+#define BIT5 (1<<5)
+#define BIT6 (1<<6)
+#define BIT7 (1<<7)
+#define BIT8 (1<<8)
+#define BIT9 (1<<9)
+#define BIT10 (1<<10)
+#define BIT11 (1<<11)
+#define BIT12 (1<<12)
+#define BIT13 (1<<13)
+#define BIT14 (1<<14)
+#define BIT15 (1<<15)
+#define BIT16 (1<<16)
+#define BIT17 (1<<17)
+#define BIT18 (1<<18)
+#define BIT19 (1<<19)
+#define BIT20 (1<<20)
+#define BIT21 (1<<21)
+#define BIT22 (1<<22)
+#define BIT23 (1<<23)
+#define BIT24 (1<<24)
+#define BIT25 (1<<25)
+#define BIT26 (1<<26)
+#define BIT27 (1<<27)
+#define BIT28 (1<<28)
+#define BIT29 (1<<29)
+#define BIT30 (1<<30)
+#define BIT31 (1<<31)
+
+#endif
+
--- /dev/null
+/*
+ * (C) Copyright 2004
+ * Texas Instruments, <www.ti.com>
+ * Richard Woodruff <r-woodruff2@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef _OMAP24XX_CLOCKS_H_
+#define _OMAP24XX_CLOCKS_H_
+
+#define COMMIT_DIVIDERS 0x1
+
+#define MODE_BYPASS_FAST 0x2
+#define APLL_LOCK 0xc
+#ifdef CONFIG_APTIX
+#define DPLL_LOCK 0x1 /* stay in bypass mode */
+#else
+#define DPLL_LOCK 0x3 /* DPLL lock */
+#endif
+
+/****************************************************************************;
+; PRCM Scheme II
+;
+; Enable clocks and DPLL for:
+; DPLL=300, DPLLout=600 M=1,N=50 CM_CLKSEL1_PLL[21:8] 12/2*50
+; Core=600 (core domain) DPLLx2 CM_CLKSEL2_PLL[1:0]
+; MPUF=300 (mpu domain) 2 CM_CLKSEL_MPU[4:0]
+; DSPF=200 (dsp domain) 3 CM_CLKSEL_DSP[4:0]
+; DSPI=100 6 CM_CLKSEL_DSP[6:5]
+; DSP_S bypass CM_CLKSEL_DSP[7]
+; IVAF=200 (dsp domain) 3 CM_CLKSEL_DSP[12:8]
+; IVAF=100 auto
+; IVAI auto
+; IVA_MPU auto
+; IVA_S bypass CM_CLKSEL_DSP[13]
+; GFXF=50 (gfx domain) 12 CM_CLKSEL_FGX[2:0]
+; SSI_SSRF=200 3 CM_CLKSEL1_CORE[24:20]
+; SSI_SSTF=100 auto
+; L3=100Mhz (sdram) 6 CM_CLKSEL1_CORE[4:0]
+; L4=100Mhz 6
+; C_L4_USB=50 12 CM_CLKSEL1_CORE[6:5]
+***************************************************************************/
+#define II_DPLL_OUT_X2 0x2 /* x2 core out */
+#define II_MPU_DIV 0x2 /* mpu = core/2 */
+#define II_DSP_DIV 0x343 /* dsp & iva divider */
+#define II_GFX_DIV 0x2
+#define II_BUS_DIV 0x04600C26
+#define II_BUS_DIV_ES1 0x04601026
+#define II_DPLL_300 0x01832100
+
+/* set defaults for boot up */
+#ifdef PRCM_CONFIG_II
+#define DPLL_OUT II_DPLL_OUT_X2
+#define MPU_DIV II_MPU_DIV
+#define DSP_DIV II_DSP_DIV
+#define GFX_DIV II_GFX_DIV
+#define BUS_DIV II_BUS_DIV
+#define BUS_DIV_ES1 II_BUS_DIV_ES1
+#define DPLL_VAL II_DPLL_300
+#endif
+
+/* lock delay time out */
+#define LDELAY 12000000
+
+#endif
+
--- /dev/null
+/*
+ * (C) Copyright 2004
+ * Texas Instruments, <www.ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef _OMAP24XX_I2C_H_
+#define _OMAP24XX_I2C_H_
+
+#define I2C_BASE 0x48070000
+#define I2C_BASE2 0x48072000 /* nothing hooked up on h4 */
+
+#define I2C_REV (I2C_BASE + 0x00)
+#define I2C_IE (I2C_BASE + 0x04)
+#define I2C_STAT (I2C_BASE + 0x08)
+#define I2C_IV (I2C_BASE + 0x0c)
+#define I2C_BUF (I2C_BASE + 0x14)
+#define I2C_CNT (I2C_BASE + 0x18)
+#define I2C_DATA (I2C_BASE + 0x1c)
+#define I2C_CON (I2C_BASE + 0x24)
+#define I2C_OA (I2C_BASE + 0x28)
+#define I2C_SA (I2C_BASE + 0x2c)
+#define I2C_PSC (I2C_BASE + 0x30)
+#define I2C_SCLL (I2C_BASE + 0x34)
+#define I2C_SCLH (I2C_BASE + 0x38)
+#define I2C_SYSTEST (I2C_BASE + 0x3c)
+
+/* I2C masks */
+
+/* I2C Interrupt Enable Register (I2C_IE): */
+#define I2C_IE_GC_IE (1 << 5)
+#define I2C_IE_XRDY_IE (1 << 4) /* Transmit data ready interrupt enable */
+#define I2C_IE_RRDY_IE (1 << 3) /* Receive data ready interrupt enable */
+#define I2C_IE_ARDY_IE (1 << 2) /* Register access ready interrupt enable */
+#define I2C_IE_NACK_IE (1 << 1) /* No acknowledgment interrupt enable */
+#define I2C_IE_AL_IE (1 << 0) /* Arbitration lost interrupt enable */
+
+/* I2C Status Register (I2C_STAT): */
+
+#define I2C_STAT_SBD (1 << 15) /* Single byte data */
+#define I2C_STAT_BB (1 << 12) /* Bus busy */
+#define I2C_STAT_ROVR (1 << 11) /* Receive overrun */
+#define I2C_STAT_XUDF (1 << 10) /* Transmit underflow */
+#define I2C_STAT_AAS (1 << 9) /* Address as slave */
+#define I2C_STAT_GC (1 << 5)
+#define I2C_STAT_XRDY (1 << 4) /* Transmit data ready */
+#define I2C_STAT_RRDY (1 << 3) /* Receive data ready */
+#define I2C_STAT_ARDY (1 << 2) /* Register access ready */
+#define I2C_STAT_NACK (1 << 1) /* No acknowledgment interrupt enable */
+#define I2C_STAT_AL (1 << 0) /* Arbitration lost interrupt enable */
+
+
+/* I2C Interrupt Code Register (I2C_INTCODE): */
+
+#define I2C_INTCODE_MASK 7
+#define I2C_INTCODE_NONE 0
+#define I2C_INTCODE_AL 1 /* Arbitration lost */
+#define I2C_INTCODE_NAK 2 /* No acknowledgement/general call */
+#define I2C_INTCODE_ARDY 3 /* Register access ready */
+#define I2C_INTCODE_RRDY 4 /* Rcv data ready */
+#define I2C_INTCODE_XRDY 5 /* Xmit data ready */
+
+/* I2C Buffer Configuration Register (I2C_BUF): */
+
+#define I2C_BUF_RDMA_EN (1 << 15) /* Receive DMA channel enable */
+#define I2C_BUF_XDMA_EN (1 << 7) /* Transmit DMA channel enable */
+
+/* I2C Configuration Register (I2C_CON): */
+
+#define I2C_CON_EN (1 << 15) /* I2C module enable */
+#define I2C_CON_BE (1 << 14) /* Big endian mode */
+#define I2C_CON_STB (1 << 11) /* Start byte mode (master mode only) */
+#define I2C_CON_MST (1 << 10) /* Master/slave mode */
+#define I2C_CON_TRX (1 << 9) /* Transmitter/receiver mode (master mode only) */
+#define I2C_CON_XA (1 << 8) /* Expand address */
+#define I2C_CON_STP (1 << 1) /* Stop condition (master mode only) */
+#define I2C_CON_STT (1 << 0) /* Start condition (master mode only) */
+
+/* I2C System Test Register (I2C_SYSTEST): */
+
+#define I2C_SYSTEST_ST_EN (1 << 15) /* System test enable */
+#define I2C_SYSTEST_FREE (1 << 14) /* Free running mode (on breakpoint) */
+#define I2C_SYSTEST_TMODE_MASK (3 << 12) /* Test mode select */
+#define I2C_SYSTEST_TMODE_SHIFT (12) /* Test mode select */
+#define I2C_SYSTEST_SCL_I (1 << 3) /* SCL line sense input value */
+#define I2C_SYSTEST_SCL_O (1 << 2) /* SCL line drive output value */
+#define I2C_SYSTEST_SDA_I (1 << 1) /* SDA line sense input value */
+#define I2C_SYSTEST_SDA_O (1 << 0) /* SDA line drive output value */
+
+#endif
--- /dev/null
+/*
+ * (C) Copyright 2004
+ * Texas Instruments, <www.ti.com>
+ * Richard Woodruff <r-woodruff2@ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _OMAP24XX_MEM_H_
+#define _OMAP24XX_MEM_H_
+
+#define SDRC_CS0_OSET 0x0
+#define SDRC_CS1_OSET 0x30 /* mirror CS1 regs appear offset 0x30 from CS0 */
+
+#ifndef __ASSEMBLY__
+/* struct's for holding data tables for current boards, they are getting used
+ early in init when NO global access are there */
+struct sdrc_data_s {
+ u32 sdrc_sharing;
+ u32 sdrc_mdcfg_0;
+ u32 sdrc_actim_ctrla_0;
+ u32 sdrc_actim_ctrlb_0;
+ u32 sdrc_rfr_ctrl;
+ u32 sdrc_mr_0;
+ u32 sdrc_dlla_ctrl;
+ u32 sdrc_dllb_ctrl;
+} /*__attribute__ ((packed))*/;
+typedef struct sdrc_data_s sdrc_data_t;
+#endif
+
+/* Slower full frequency range default timings for x32 operation*/
+#define H4_2420_SDRC_SHARING 0x00000100
+#define H4_2420_SDRC_MDCFG_0 0x01702011
+#define H4_2420_SDRC_ACTIM_CTRLA_0 0x9bead909
+#define H4_2420_SDRC_ACTIM_CTRLB_0 0x00000014
+#define H4_2420_SDRC_RFR_CTRL_ES1 0x00002401
+#define H4_2420_SDRC_RFR_CTRL 0x0002da01
+#define H4_2420_SDRC_MR_0 0x00000032
+#define H4_2420_SDRC_DLLA_CTRL 0x00007307
+#define H4_2420_SDRC_DLLB_CTRL 0x00007307
+
+#define H4_2422_SDRC_SHARING 0x00004b00
+#define H4_2422_SDRC_MDCFG_0 0x00801011
+#define H4_2422_SDRC_ACTIM_CTRLA_0 0x9BEAD909
+#define H4_2422_SDRC_ACTIM_CTRLB_0 0x00000020
+#define H4_2422_SDRC_RFR_CTRL_ES1 0x00002401
+#define H4_2422_SDRC_RFR_CTRL 0x0002da03
+#define H4_2422_SDRC_MR_0 0x00000032
+#define H4_2422_SDRC_DLLA_CTRL 0x00007307
+#define H4_2422_SDRC_DLLB_CTRL 0x00007307
+
+#define H4_2420_COMBO_MDCFG_0 0x00801011
+
+/* optimized timings */
+#define H4_2420_SDRC_ACTIM_CTRLA_0_100MHz 0x5A59B485
+#define H4_2420_SDRC_ACTIM_CTRLB_0_100MHz 0x0000000e
+
+
+#ifdef PRCM_CONFIG_II /* L3 at 100MHz */
+#define H4_24XX_GPMC_CONFIG1_0 0x3
+#define H4_24XX_GPMC_CONFIG2_0 0x001f1f01
+#define H4_24XX_GPMC_CONFIG3_0 0x00030301
+#define H4_24XX_GPMC_CONFIG4_0 0x0C030C03
+#define H4_24XX_GPMC_CONFIG5_0 0x01131F1F
+#define H4_24XX_GPMC_CONFIG7_0 (0x00000C40|(H4_CS0_BASE >> 24))
+
+#define H4_24XX_GPMC_CONFIG1_1 0x00011000
+#define H4_24XX_GPMC_CONFIG2_1 0x001F1F00
+#define H4_24XX_GPMC_CONFIG3_1 0x00080802
+#define H4_24XX_GPMC_CONFIG4_1 0x1C091C09
+#define H4_24XX_GPMC_CONFIG5_1 0x031A1F1F
+#define H4_24XX_GPMC_CONFIG6_1 0x000003C2
+#define H4_24XX_GPMC_CONFIG7_1 (0x00000F40|(H4_CS1_BASE >> 24))
+#endif
+
+#ifdef PRCM_CONFIG_III /* L3 at 133MHz */
+#define H4_24XX_GPMC_CONFIG1_0 0x3
+#define H4_24XX_GPMC_CONFIG2_0 0x001f1f01
+#define H4_24XX_GPMC_CONFIG3_0 0x001F1F00
+#define H4_24XX_GPMC_CONFIG4_0 0x16061606
+#define H4_24XX_GPMC_CONFIG5_0 0x01131F1F
+#define H4_24XX_GPMC_CONFIG7_0 (0x00000C40|(H4_CS0_BASE >> 24))
+
+#define H4_24XX_GPMC_CONFIG1_1 0x00011000
+#define H4_24XX_GPMC_CONFIG2_1 0x001f1f01
+#define H4_24XX_GPMC_CONFIG3_1 0x001F1F00
+#define H4_24XX_GPMC_CONFIG4_1 0x1A061A06
+#define H4_24XX_GPMC_CONFIG5_1 0x041F1F1F
+#define H4_24XX_GPMC_CONFIG6_1 0x000004C4
+#define H4_24XX_GPMC_CONFIG7_1 (0x00000F40|(H4_CS1_BASE >> 24))
+#endif
+
+#ifdef CONFIG_APTIX /* SDRC-SDR for Aptix x16 */
+#define VAL_H4_SDRC_SHARING_16 0x00002400 /* No-Tristate, 16bit on D31-D16, CS1=dont care */
+#define VAL_H4_SDRC_SHARING 0x00000100
+#define VAL_H4_SDRC_MCFG_0_16 0x00901000 /* SDR-SDRAM,External,x16 bit */
+#define VAL_H4_SDRC_MCFG_0 0x01702011
+#define VAL_H4_SDRC_MR_0 0x00000029 /* Burst=2, Serial Mode, CAS 3*/
+#define VAL_H4_SDRC_RFR_CTRL_0 0x00001703 /* refresh time */
+#define VAL_H4_SDRC_DCDL2_CTRL 0x5A59B485
+#endif
+
+#endif
--- /dev/null
+/*
+ * (C) Copyright 2004
+ * Texas Instruments, <www.ti.com>
+ * Richard Woodruff <r-woodruff2@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef _OMAP2420_MUX_H_
+#define _OMAP2420_MUX_H_
+
+#ifndef __ASSEMBLY__
+typedef unsigned char uint8;
+typedef unsigned int uint32;
+
+void muxSetupSDRC(void);
+void muxSetupGPMC(void);
+void muxSetupUsb0(void);
+void muxSetupUart3(void);
+void muxSetupI2C1(void);
+void muxSetupUART1(void);
+void muxSetupLCD(void);
+void muxSetupCamera(void);
+void muxSetupMMCSD(void) ;
+void muxSetupTouchScreen(void) ;
+void muxSetupHDQ(void);
+#endif
+
+#define USB_OTG_CTRL ((volatile uint32 *)0x4805E30C)
+
+/* Pin Muxing registers used for HDQ (Smart battery) */
+#define CONTROL_PADCONF_HDQ_SIO ((volatile unsigned char *)0x48000115)
+
+/* Pin Muxing registers used for GPMC */
+#define CONTROL_PADCONF_GPMC_D2_BYTE0 ((volatile unsigned char *)0x48000088)
+#define CONTROL_PADCONF_GPMC_D2_BYTE1 ((volatile unsigned char *)0x48000089)
+#define CONTROL_PADCONF_GPMC_D2_BYTE2 ((volatile unsigned char *)0x4800008A)
+#define CONTROL_PADCONF_GPMC_D2_BYTE3 ((volatile unsigned char *)0x4800008B)
+
+#define CONTROL_PADCONF_GPMC_NCS0_BYTE0 ((volatile unsigned char *)0x4800008C)
+#define CONTROL_PADCONF_GPMC_NCS0_BYTE1 ((volatile unsigned char *)0x4800008D)
+#define CONTROL_PADCONF_GPMC_NCS0_BYTE2 ((volatile unsigned char *)0x4800008E)
+#define CONTROL_PADCONF_GPMC_NCS0_BYTE3 ((volatile unsigned char *)0x4800008F)
+
+/* Pin Muxing registers used for SDRC */
+#define CONTROL_PADCONF_SDRC_NCS0_BYTE0 ((volatile unsigned char *)0x480000A0)
+#define CONTROL_PADCONF_SDRC_NCS0_BYTE1 ((volatile unsigned char *)0x480000A1)
+#define CONTROL_PADCONF_SDRC_NCS0_BYTE2 ((volatile unsigned char *)0x480000A2)
+#define CONTROL_PADCONF_SDRC_NCS0_BYTE3 ((volatile unsigned char *)0x480000A3)
+
+#define CONTROL_PADCONF_SDRC_A14_BYTE0 ((volatile unsigned char *)0x48000030)
+#define CONTROL_PADCONF_SDRC_A14_BYTE1 ((volatile unsigned char *)0x48000031)
+#define CONTROL_PADCONF_SDRC_A14_BYTE2 ((volatile unsigned char *)0x48000032)
+#define CONTROL_PADCONF_SDRC_A14_BYTE3 ((volatile unsigned char *)0x48000033)
+
+/* Pin Muxing registers used for Touch Screen (SPI) */
+#define CONTROL_PADCONF_SPI1_CLK ((volatile unsigned char *)0x480000FF)
+#define CONTROL_PADCONF_SPI1_SIMO ((volatile unsigned char *)0x48000100)
+#define CONTROL_PADCONF_SPI1_SOMI ((volatile unsigned char *)0x48000101)
+#define CONTROL_PADCONF_SPI1_NCS0 ((volatile unsigned char *)0x48000102)
+
+#define CONTROL_PADCONF_MCBSP1_FSR ((volatile unsigned char *)0x4800010B)
+
+/* Pin Muxing registers used for MMCSD */
+#define CONTROL_PADCONF_MMC_CLKI ((volatile unsigned char *)0x480000FE)
+#define CONTROL_PADCONF_MMC_CLKO ((volatile unsigned char *)0x480000F3)
+#define CONTROL_PADCONF_MMC_CMD ((volatile unsigned char *)0x480000F4)
+#define CONTROL_PADCONF_MMC_DAT0 ((volatile unsigned char *)0x480000F5)
+#define CONTROL_PADCONF_MMC_DAT1 ((volatile unsigned char *)0x480000F6)
+#define CONTROL_PADCONF_MMC_DAT2 ((volatile unsigned char *)0x480000F7)
+#define CONTROL_PADCONF_MMC_DAT3 ((volatile unsigned char *)0x480000F8)
+#define CONTROL_PADCONF_MMC_DAT_DIR0 ((volatile unsigned char *)0x480000F9)
+#define CONTROL_PADCONF_MMC_DAT_DIR1 ((volatile unsigned char *)0x480000FA)
+#define CONTROL_PADCONF_MMC_DAT_DIR2 ((volatile unsigned char *)0x480000FB)
+#define CONTROL_PADCONF_MMC_DAT_DIR3 ((volatile unsigned char *)0x480000FC)
+#define CONTROL_PADCONF_MMC_CMD_DIR ((volatile unsigned char *)0x480000FD)
+
+#define CONTROL_PADCONF_SDRC_A14 ((volatile unsigned char *)0x48000030)
+#define CONTROL_PADCONF_SDRC_A13 ((volatile unsigned char *)0x48000031)
+
+/* Pin Muxing registers used for CAMERA */
+#define CONTROL_PADCONF_SYS_NRESWARM ((volatile unsigned char *)0x4800012B)
+
+#define CONTROL_PADCONF_CAM_XCLK ((volatile unsigned char *)0x480000DC)
+#define CONTROL_PADCONF_CAM_LCLK ((volatile unsigned char *)0x480000DB)
+#define CONTROL_PADCONF_CAM_VS ((volatile unsigned char *)0x480000DA)
+#define CONTROL_PADCONF_CAM_HS ((volatile unsigned char *)0x480000D9)
+#define CONTROL_PADCONF_CAM_D0 ((volatile unsigned char *)0x480000D8)
+#define CONTROL_PADCONF_CAM_D1 ((volatile unsigned char *)0x480000D7)
+#define CONTROL_PADCONF_CAM_D2 ((volatile unsigned char *)0x480000D6)
+#define CONTROL_PADCONF_CAM_D3 ((volatile unsigned char *)0x480000D5)
+#define CONTROL_PADCONF_CAM_D4 ((volatile unsigned char *)0x480000D4)
+#define CONTROL_PADCONF_CAM_D5 ((volatile unsigned char *)0x480000D3)
+#define CONTROL_PADCONF_CAM_D6 ((volatile unsigned char *)0x480000D2)
+#define CONTROL_PADCONF_CAM_D7 ((volatile unsigned char *)0x480000D1)
+#define CONTROL_PADCONF_CAM_D8 ((volatile unsigned char *)0x480000D0)
+#define CONTROL_PADCONF_CAM_D9 ((volatile unsigned char *)0x480000CF)
+
+/* Pin Muxing registers used for LCD */
+#define CONTROL_PADCONF_DSS_D0 ((volatile unsigned char *)0x480000B3)
+#define CONTROL_PADCONF_DSS_D1 ((volatile unsigned char *)0x480000B4)
+#define CONTROL_PADCONF_DSS_D2 ((volatile unsigned char *)0x480000B5)
+#define CONTROL_PADCONF_DSS_D3 ((volatile unsigned char *)0x480000B6)
+#define CONTROL_PADCONF_DSS_D4 ((volatile unsigned char *)0x480000B7)
+#define CONTROL_PADCONF_DSS_D5 ((volatile unsigned char *)0x480000B8)
+#define CONTROL_PADCONF_DSS_D6 ((volatile unsigned char *)0x480000B9)
+#define CONTROL_PADCONF_DSS_D7 ((volatile unsigned char *)0x480000BA)
+#define CONTROL_PADCONF_DSS_D8 ((volatile unsigned char *)0x480000BB)
+#define CONTROL_PADCONF_DSS_D9 ((volatile unsigned char *)0x480000BC)
+#define CONTROL_PADCONF_DSS_D10 ((volatile unsigned char *)0x480000BD)
+#define CONTROL_PADCONF_DSS_D11 ((volatile unsigned char *)0x480000BE)
+#define CONTROL_PADCONF_DSS_D12 ((volatile unsigned char *)0x480000BF)
+#define CONTROL_PADCONF_DSS_D13 ((volatile unsigned char *)0x480000C0)
+#define CONTROL_PADCONF_DSS_D14 ((volatile unsigned char *)0x480000C1)
+#define CONTROL_PADCONF_DSS_D15 ((volatile unsigned char *)0x480000C2)
+#define CONTROL_PADCONF_DSS_D16 ((volatile unsigned char *)0x480000C3)
+#define CONTROL_PADCONF_DSS_D17 ((volatile unsigned char *)0x480000C4)
+#define CONTROL_PADCONF_DSS_PCLK ((volatile unsigned char *)0x480000CB)
+#define CONTROL_PADCONF_DSS_VSYNC ((volatile unsigned char *)0x480000CC)
+#define CONTROL_PADCONF_DSS_HSYNC ((volatile unsigned char *)0x480000CD)
+#define CONTROL_PADCONF_DSS_ACBIAS ((volatile unsigned char *)0x480000CE)
+
+/* Pin Muxing registers used for UART1 */
+#define CONTROL_PADCONF_UART1_CTS ((volatile unsigned char *)0x480000C5)
+#define CONTROL_PADCONF_UART1_RTS ((volatile unsigned char *)0x480000C6)
+#define CONTROL_PADCONF_UART1_TX ((volatile unsigned char *)0x480000C7)
+#define CONTROL_PADCONF_UART1_RX ((volatile unsigned char *)0x480000C8)
+
+/* Pin Muxing registers used for I2C1 */
+#define CONTROL_PADCONF_I2C1_SCL ((volatile unsigned char *)0x48000111)
+#define CONTROL_PADCONF_I2C1_SDA ((volatile unsigned char *)0x48000112)
+
+/* Pin Muxing registres used for USB0. */
+#define CONTROL_PADCONF_USB0_PUEN ((volatile uint8 *)0x4800011D)
+#define CONTROL_PADCONF_USB0_VP ((volatile uint8 *)0x4800011E)
+#define CONTROL_PADCONF_USB0_VM ((volatile uint8 *)0x4800011F)
+#define CONTROL_PADCONF_USB0_RCV ((volatile uint8 *)0x48000120)
+#define CONTROL_PADCONF_USB0_TXEN ((volatile uint8 *)0x48000121)
+#define CONTROL_PADCONF_USB0_SE0 ((volatile uint8 *)0x48000122)
+#define CONTROL_PADCONF_USB0_DAT ((volatile uint8 *)0x48000123)
+
+/* Pin Muxing registers used for UART3/IRDA */
+#define CONTROL_PADCONF_UART3_TX_IRTX ((volatile uint8 *)0x48000118)
+#define CONTROL_PADCONF_UART3_RX_IRRX ((volatile uint8 *)0x48000119)
+
+#endif
--- /dev/null
+/*
+ * (C) Copyright 2004
+ * Texas Instruments, <www.ti.com>
+ * Richard Woodruff <r-woodruff2@ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _OMAP2420_SYS_H_
+#define _OMAP2420_SYS_H_
+
+#include <asm/arch/sizes.h>
+
+/*
+ * 2420 specific Section
+ */
+
+/* CONTROL */
+#define OMAP2420_CTRL_BASE (0x48000000)
+#define CONTROL_STATUS (OMAP2420_CTRL_BASE + 0x2F8)
+
+/* TAP information */
+#define OMAP2420_TAP_BASE (0x48014000)
+#define TAP_IDCODE_REG (OMAP2420_TAP_BASE+0x204)
+
+/* GPMC */
+#define OMAP2420_GPMC_BASE (0x6800A000)
+#define GPMC_SYSCONFIG (OMAP2420_GPMC_BASE+0x10)
+#define GPMC_IRQENABLE (OMAP2420_GPMC_BASE+0x1C)
+#define GPMC_TIMEOUT_CONTROL (OMAP2420_GPMC_BASE+0x40)
+#define GPMC_CONFIG (OMAP2420_GPMC_BASE+0x50)
+#define GPMC_CONFIG1_0 (OMAP2420_GPMC_BASE+0x60)
+#define GPMC_CONFIG2_0 (OMAP2420_GPMC_BASE+0x64)
+#define GPMC_CONFIG3_0 (OMAP2420_GPMC_BASE+0x68)
+#define GPMC_CONFIG4_0 (OMAP2420_GPMC_BASE+0x6C)
+#define GPMC_CONFIG5_0 (OMAP2420_GPMC_BASE+0x70)
+#define GPMC_CONFIG7_0 (OMAP2420_GPMC_BASE+0x78)
+#define GPMC_CONFIG1_1 (OMAP2420_GPMC_BASE+0x90)
+#define GPMC_CONFIG2_1 (OMAP2420_GPMC_BASE+0x94)
+#define GPMC_CONFIG3_1 (OMAP2420_GPMC_BASE+0x98)
+#define GPMC_CONFIG4_1 (OMAP2420_GPMC_BASE+0x9C)
+#define GPMC_CONFIG5_1 (OMAP2420_GPMC_BASE+0xA0)
+#define GPMC_CONFIG6_1 (OMAP2420_GPMC_BASE+0xA4)
+#define GPMC_CONFIG7_1 (OMAP2420_GPMC_BASE+0xA8)
+
+/* SMS */
+#define OMAP2420_SMS_BASE 0x68008000
+#define SMS_SYSCONFIG (OMAP2420_SMS_BASE+0x10)
+
+/* SDRC */
+#define OMAP2420_SDRC_BASE 0x68009000
+#define SDRC_SYSCONFIG (OMAP2420_SDRC_BASE+0x10)
+#define SDRC_STATUS (OMAP2420_SDRC_BASE+0x14)
+#define SDRC_SHARING (OMAP2420_SDRC_BASE+0x44)
+#define SDRC_DLLA_CTRL (OMAP2420_SDRC_BASE+0x60)
+#define SDRC_DLLB_CTRL (OMAP2420_SDRC_BASE+0x68)
+#define SDRC_POWER (OMAP2420_SDRC_BASE+0x70)
+#define SDRC_MCFG_0 (OMAP2420_SDRC_BASE+0x80)
+#define SDRC_MR_0 (OMAP2420_SDRC_BASE+0x84)
+#define SDRC_ACTIM_CTRLA_0 (OMAP2420_SDRC_BASE+0x9C)
+#define SDRC_ACTIM_CTRLB_0 (OMAP2420_SDRC_BASE+0xA0)
+#define SDRC_ACTIM_CTRLA_1 (OMAP2420_SDRC_BASE+0xC4)
+#define SDRC_ACTIM_CTRLB_1 (OMAP2420_SDRC_BASE+0xC8)
+#define SDRC_RFR_CTRL (OMAP2420_SDRC_BASE+0xA4)
+#define SDRC_MANUAL_0 (OMAP2420_SDRC_BASE+0xA8)
+#define OMAP2420_SDRC_CS0 0x80000000
+#define OMAP2420_SDRC_CS1 0xA0000000
+#define CMD_NOP 0x0
+#define CMD_PRECHARGE 0x1
+#define CMD_AUTOREFRESH 0x2
+#define CMD_ENTR_PWRDOWN 0x3
+#define CMD_EXIT_PWRDOWN 0x4
+#define CMD_ENTR_SRFRSH 0x5
+#define CMD_CKE_HIGH 0x6
+#define CMD_CKE_LOW 0x7
+#define SOFTRESET BIT1
+#define SMART_IDLE (0x2 << 3)
+#define REF_ON_IDLE (0x1 << 6)
+
+
+/* UART */
+#define OMAP2420_UART1 0x4806A000
+#define OMAP2420_UART2 0x4806C000
+#define OMAP2420_UART3 0x4806E000
+
+/* General Purpose Timers */
+#define OMAP2420_GPT1 0x48028000
+#define OMAP2420_GPT2 0x4802A000
+#define OMAP2420_GPT3 0x48078000
+#define OMAP2420_GPT4 0x4807A000
+#define OMAP2420_GPT5 0x4807C000
+#define OMAP2420_GPT6 0x4807E000
+#define OMAP2420_GPT7 0x48080000
+#define OMAP2420_GPT8 0x48082000
+#define OMAP2420_GPT9 0x48084000
+#define OMAP2420_GPT10 0x48086000
+#define OMAP2420_GPT11 0x48088000
+#define OMAP2420_GPT12 0x4808A000
+
+/* timer regs offsets (32 bit regs) */
+#define TIDR 0x0 /* r */
+#define TIOCP_CFG 0x10 /* rw */
+#define TISTAT 0x14 /* r */
+#define TISR 0x18 /* rw */
+#define TIER 0x1C /* rw */
+#define TWER 0x20 /* rw */
+#define TCLR 0x24 /* rw */
+#define TCRR 0x28 /* rw */
+#define TLDR 0x2C /* rw */
+#define TTGR 0x30 /* rw */
+#define TWPS 0x34 /* r */
+#define TMAR 0x38 /* rw */
+#define TCAR1 0x3c /* r */
+#define TSICR 0x40 /* rw */
+#define TCAR2 0x44 /* r */
+
+/* WatchDog Timers (1 secure, 3 GP) */
+#define WD1_BASE 0x48020000
+#define WD2_BASE 0x48022000
+#define WD3_BASE 0x48024000
+#define WD4_BASE 0x48026000
+#define WWPS 0x34 /* r */
+#define WSPR 0x48 /* rw */
+#define WD_UNLOCK1 0xAAAA
+#define WD_UNLOCK2 0x5555
+
+/* PRCM */
+#define OMAP2420_CM_BASE 0x48008000
+#define PRCM_CLKCFG_CTRL (OMAP2420_CM_BASE+0x080)
+#define CM_CLKSEL_MPU (OMAP2420_CM_BASE+0x140)
+#define CM_FCLKEN1_CORE (OMAP2420_CM_BASE+0x200)
+#define CM_FCLKEN2_CORE (OMAP2420_CM_BASE+0x204)
+#define CM_ICLKEN1_CORE (OMAP2420_CM_BASE+0x210)
+#define CM_ICLKEN2_CORE (OMAP2420_CM_BASE+0x214)
+#define CM_CLKSEL1_CORE (OMAP2420_CM_BASE+0x240)
+#define CM_CLKSEL_WKUP (OMAP2420_CM_BASE+0x440)
+#define CM_CLKSEL2_CORE (OMAP2420_CM_BASE+0x244)
+#define CM_CLKSEL_GFX (OMAP2420_CM_BASE+0x340)
+#define PM_RSTCTRL_WKUP (OMAP2420_CM_BASE+0x450)
+#define CM_CLKEN_PLL (OMAP2420_CM_BASE+0x500)
+#define CM_IDLEST_CKGEN (OMAP2420_CM_BASE+0x520)
+#define CM_CLKSEL1_PLL (OMAP2420_CM_BASE+0x540)
+#define CM_CLKSEL2_PLL (OMAP2420_CM_BASE+0x544)
+#define CM_CLKSEL_DSP (OMAP2420_CM_BASE+0x840)
+
+/*
+ * H4 specific Section
+ */
+
+/*
+ * The 2420's chip selects are programmable. The mask ROM
+ * does configure CS0 to 0x08000000 before dispatch. So, if
+ * you want your code to live below that address, you have to
+ * be prepared to jump though hoops, to reset the base address.
+ */
+#if defined(CONFIG_OMAP2420H4)
+/* GPMC */
+#ifdef CONFIG_VIRTIO_A /* Pre version B */
+# define H4_CS0_BASE 0x08000000 /* flash (64 Meg aligned) */
+# define H4_CS1_BASE 0x04000000 /* debug board */
+# define H4_CS2_BASE 0x0A000000 /* wifi board */
+#else
+# define H4_CS0_BASE 0x04000000 /* flash (64 Meg aligned) */
+# define H4_CS1_BASE 0x08000000 /* debug board */
+# define H4_CS2_BASE 0x0A000000 /* wifi board */
+#endif
+
+/* base address for indirect vectors (internal boot mode) */
+#define SRAM_OFFSET0 0x40000000
+#define SRAM_OFFSET1 0x00200000
+#define SRAM_OFFSET2 0x0000F800
+#define SRAM_VECT_CODE (SRAM_OFFSET0|SRAM_OFFSET1|SRAM_OFFSET2)
+
+#define LOW_LEVEL_SRAM_STACK 0x4020FFFC
+
+#define PERIFERAL_PORT_BASE 0x480FE003
+
+/* FPGA on Debug board.*/
+#define ETH_CONTROL_REG (H4_CS1_BASE+0x30b)
+#define LAN_RESET_REGISTER (H4_CS1_BASE+0x1c)
+#endif /* endif CONFIG_2420H4 */
+
+#endif
+
--- /dev/null
+/*
+ * (C) Copyright 2004
+ * Texas Instruments, <www.ti.com>
+ * Richard Woodruff <r-woodruff2@ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _OMAP24XX_REV_H_
+#define _OMAP24XX_REV_H_
+
+typedef struct h4_system_data {
+ /* base board info */
+ u32 base_b_rev; /* rev from base board i2c */
+ /* cpu board info */
+ u32 cpu_b_rev; /* rev from cpu board i2c */
+ u32 cpu_b_mux; /* mux type on daughter board */
+ u32 cpu_b_ddr_type; /* mem type */
+ u32 cpu_b_ddr_speed; /* ddr speed rating */
+ u32 cpu_b_switches; /* boot ctrl switch settings */
+ /* cpu info */
+ u32 cpu_type; /* type of cpu; 2420, 2422, 2430,...*/
+ u32 cpu_rev; /* rev of given cpu; ES1, ES2,...*/
+} h4_sys_data;
+
+#define CDB_DDR_COMBO /* combo part on cpu daughter card */
+#define CDB_DDR_IPDB /* 2x16 parts on daughter card */
+
+#define DDR_100 100 /* type found on most mem d-boards */
+#define DDR_111 111 /* some combo parts */
+#define DDR_133 133 /* most combo, some mem d-boards */
+#define DDR_165 165 /* future parts */
+
+#define CPU_2420 0x2420
+#define CPU_2422 0x2422
+
+#define CPU_2422_ES1 1
+#define CPU_2422_ES2 2
+#define CPU_2420_ES1 1
+#define CPU_2420_ES2 2
+
+#endif
+
--- /dev/null
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+/* Size defintions
+ * Copyright (C) ARM Limited 1998. All rights reserved.
+ */
+
+#ifndef __sizes_h
+#define __sizes_h 1
+
+/* handy sizes */
+#define SZ_1K 0x00000400
+#define SZ_4K 0x00001000
+#define SZ_8K 0x00002000
+#define SZ_16K 0x00004000
+#define SZ_32K 0x00008000
+#define SZ_64K 0x00010000
+#define SZ_128K 0x00020000
+#define SZ_256K 0x00040000
+#define SZ_512K 0x00080000
+
+#define SZ_1M 0x00100000
+#define SZ_2M 0x00200000
+#define SZ_4M 0x00400000
+#define SZ_8M 0x00800000
+#define SZ_16M 0x01000000
+#define SZ_31M 0x01F00000
+#define SZ_32M 0x02000000
+#define SZ_64M 0x04000000
+#define SZ_128M 0x08000000
+#define SZ_256M 0x10000000
+#define SZ_512M 0x20000000
+
+#define SZ_1G 0x40000000
+#define SZ_2G 0x80000000
+
+#endif /* __sizes_h */
+
--- /dev/null
+/*
+ * (C) Copyright 2004
+ * Texas Instruments, <www.ti.com>
+ * Richard Woodruff <r-woodruff2@ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _OMAP24XX_SYS_INFO_H_
+#define _OMAP24XX_SYS_INFO_H_
+
+typedef struct h4_system_data {
+ /* base board info */
+ u32 base_b_rev; /* rev from base board i2c */
+ /* cpu board info */
+ u32 cpu_b_rev; /* rev from cpu board i2c */
+ u32 cpu_b_mux; /* mux type on daughter board */
+ u32 cpu_b_ddr_type; /* mem type */
+ u32 cpu_b_ddr_speed; /* ddr speed rating */
+ u32 cpu_b_switches; /* boot ctrl switch settings */
+ /* cpu info */
+ u32 cpu_type; /* type of cpu; 2420, 2422, 2430,...*/
+ u32 cpu_rev; /* rev of given cpu; ES1, ES2,...*/
+} h4_sys_data;
+
+#define DDR_STACKED 3 /* stacked part on 2422 */
+#define DDR_COMBO 2 /* combo part on cpu daughter card (menalaeus) */
+#define DDR_DISCRETE 1 /* 2x16 parts on daughter card */
+
+#define DDR_100 100 /* type found on most mem d-boards */
+#define DDR_111 111 /* some combo parts */
+#define DDR_133 133 /* most combo, some mem d-boards */
+#define DDR_165 165 /* future parts */
+
+#define CPU_2420 0x2420
+#define CPU_2422 0x2422
+
+#define CPU_2422_ES1 1
+#define CPU_2422_ES2 2
+#define CPU_2420_ES1 1
+#define CPU_2420_ES2 2
+
+#define CPU_2420_CHIPID 0x0B5D9000
+#define CPU_24XX_ID_MASK 0x0FFFF000
+#define CPU_242X_REV_MASK 0xF0000000
+
+#define BOARD_H4_MENELAUS 1
+#define BOARD_H4_SDP 2
+
+#define GPMC_MUXED 1
+#define GPMC_NONMUXED 0
+
+#define TYPE_NAND 0x800 /* bit pos for nand in gpmc reg */
+#define TYPE_NOR 0x000
+
+#define WIDTH_8BIT 0x0000
+#define WIDTH_16BIT 0x1000 /* bit pos for 16 bit in gpmc */
+
+#define I2C_MENELAUS 0x72 /* i2c id for companion chip */
+
+#endif
+
--- /dev/null
+/*
+ * (C) Copyright 2004
+ * Texas Instruments, <www.ti.com>
+ * Richard Woodruff <r-woodruff2@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef _OMAP24XX_SYS_PROTO_H_
+#define _OMAP24XX_SYS_PROTO_H_
+
+void prcm_init(void);
+void memif_init(void);
+void sdrc_init(void);
+void do_sdrc_init(u32,u32);
+void gpmc_init(void);
+
+void ether_init(void);
+void watchdog_init(void);
+void set_muxconf_regs(void);
+void peripheral_enable(void);
+
+u32 get_cpu_type(void);
+u32 get_cpu_rev(void);
+u32 get_mem_type(void);
+u32 get_sysboot_value(void);
+u32 get_gpmc0_base(void);
+u32 is_gpmc_muxed(void);
+u32 get_gpmc0_type(void);
+u32 get_gpmc0_width(void);
+u32 wait_on_value(u32 read_bit_mask, u32 match_value, u32 read_addr, u32 bound);
+u32 get_board_type(void);
+void display_board_info(u32);
+void update_mux(u32,u32);
+#endif
+
* to the architecture specific code.
*/
#define __arch_getb(a) (*(volatile unsigned char *)(a))
-#define __arch_getl(a) (*(volatile unsigned int *)(a))
+#define __arch_getw(a) (*(volatile unsigned short *)(a))
+#define __arch_getl(a) (*(volatile unsigned int *)(a))
#define __arch_putb(v,a) (*(volatile unsigned char *)(a) = (v))
-#define __arch_putl(v,a) (*(volatile unsigned int *)(a) = (v))
+#define __arch_putw(v,a) (*(volatile unsigned short *)(a) = (v))
+#define __arch_putl(v,a) (*(volatile unsigned int *)(a) = (v))
extern void __raw_writesb(unsigned int addr, const void *data, int bytelen);
extern void __raw_writesw(unsigned int addr, const void *data, int wordlen);
--- /dev/null
+/*
+ * (C) Copyright 2004
+ * Texas Instruments.
+ * Richard Woodruff <r-woodruff2@ti.com>
+ * Kshitij Gupta <kshitij@ti.com>
+ *
+ * Configuration settings for the 242x TI H4 board.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ */
+#define CONFIG_ARM1136 1 /* This is an arm1136 CPU core */
+#define CONFIG_OMAP 1 /* in a TI OMAP core */
+#define CONFIG_OMAP2420 1 /* which is in a 2420 */
+#define CONFIG_OMAP2420H4 1 /* and on a H4 board */
+//#define CONFIG_APTIX 1 /* define if on APTIX test chip */
+//#define CONFIG_VIRTIO 1 /* Using Virtio simulator */
+
+#define PRCM_CONFIG_II 1
+#define CONFIG_PARTIAL_SRAM 1
+
+#include <asm/arch/omap2420.h> /* get chip and board defs */
+
+#ifdef CONFIG_APTIX
+#define V_SCLK 1500000
+#else
+#define V_SCLK 12000000
+#endif
+
+/* input clock of PLL */
+/* the OMAP2420 H4 has 12MHz, 13MHz, or 19.2Mhz crystal input */
+#define CONFIG_SYS_CLK_FREQ V_SCLK
+
+#undef CONFIG_USE_IRQ /* no support for IRQs */
+#define CONFIG_MISC_INIT_R
+
+#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
+#define CONFIG_SETUP_MEMORY_TAGS 1
+#define CONFIG_INITRD_TAG 1
+
+/*
+ * Size of malloc() pool
+ */
+#define CFG_ENV_SIZE SZ_128K /* Total Size of Environment Sector */
+#define CFG_MALLOC_LEN (CFG_ENV_SIZE + SZ_128K)
+#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
+
+/*
+ * Hardware drivers
+ */
+
+/*
+ * SMC91c96 Etherent
+ */
+#define CONFIG_DRIVER_LAN91C96
+#define CONFIG_LAN91C96_BASE (H4_CS1_BASE+0x300)
+#define CONFIG_LAN91C96_EXT_PHY
+
+/*
+ * NS16550 Configuration
+ */
+#ifdef CONFIG_APTIX
+#define V_NS16550_CLK (6000000) /* 6MHz in current MaxSet */
+#else
+#define V_NS16550_CLK (48000000) /* 48MHz (APLL96/2) */
+#endif
+
+#define CFG_NS16550
+#define CFG_NS16550_SERIAL
+#define CFG_NS16550_REG_SIZE (-4)
+#define CFG_NS16550_CLK V_NS16550_CLK /* 3MHz (1.5MHz*2) */
+#define CFG_NS16550_COM1 OMAP2420_UART1
+
+/*
+ * select serial console configuration
+ */
+#define CONFIG_SERIAL1 1 /* UART1 on H4 */
+
+ /*
+ * I2C configuration
+ */
+#define CONFIG_HARD_I2C
+#define CFG_I2C_SPEED 100000
+#define CFG_I2C_SLAVE 1
+#define CONFIG_DRIVER_OMAP24XX_I2C
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_CONS_INDEX 1
+#define CONFIG_BAUDRATE 115200
+#define CFG_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200}
+
+#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_DHCP | CFG_CMD_I2C)
+
+// I'd like to get to these. Snap kernel loads if we make MMC go //
+ // #define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_NAND | CFG_CMD_JFFS2 | CFG_CMD_DHCP | CFG_CMD_MMC | CFG_CMD_FAT | CFG_CMD_I2C)
+
+#define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+#define CONFIG_BOOTDELAY 3
+
+#ifdef NFS_BOOT_DEFAULTS
+#define CONFIG_BOOTARGS "mem=32M console=ttyS0,115200n8 noinitrd root=/dev/nfs rw nfsroot=128.247.77.158:/home/a0384864/wtbu/rootfs ip=dhcp"
+#else
+#define CONFIG_BOOTARGS "root=/dev/ram0 rw mem=32M console=ttyS0,115200n8 initrd=0x80600000,8M ramdisk_size=8192"
+#endif
+
+#define CONFIG_NETMASK 255.255.254.0
+#define CONFIG_IPADDR 128.247.77.90
+#define CONFIG_SERVERIP 128.247.77.158
+#define CONFIG_BOOTFILE "uImage"
+
+/*
+ * Miscellaneous configurable options
+ */
+#ifdef CONFIG_APTIX
+#define V_PROMPT "OMAP2420 Aptix # "
+#else
+#define V_PROMPT "OMAP242x H4 # "
+#endif
+
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT V_PROMPT
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+/* Print Buffer Size */
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+
+#define CFG_MEMTEST_START (OMAP2420_SDRC_CS0) /* memtest works on */
+#define CFG_MEMTEST_END (OMAP2420_SDRC_CS0+SZ_31M)
+
+#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */
+
+#define CFG_LOAD_ADDR (OMAP2420_SDRC_CS0) /* default load address */
+
+/* The 2420 has 12 GP timers, they can be driven by the SysClk (12/13/19.2) or by
+ * 32KHz clk, or from external sig. This rate is divided by a local divisor.
+ */
+#ifdef CONFIG_APTIX
+#define V_PVT 3
+#else
+#define V_PVT 7 /* use with 12MHz/128 */
+#endif
+
+#define CFG_TIMERBASE OMAP2420_GPT2
+#define CFG_PVT V_PVT /* 2^(pvt+1) */
+#define CFG_HZ ((CONFIG_SYS_CLK_FREQ)/(2 << CFG_PVT))
+
+/*-----------------------------------------------------------------------
+ * Stack sizes
+ *
+ * The stack sizes are set up in start.S using the settings below
+ */
+#define CONFIG_STACKSIZE SZ_128K /* regular stack */
+#ifdef CONFIG_USE_IRQ
+#define CONFIG_STACKSIZE_IRQ SZ_4K /* IRQ stack */
+#define CONFIG_STACKSIZE_FIQ SZ_4K /* FIQ stack */
+#endif
+
+/*-----------------------------------------------------------------------
+ * Physical Memory Map
+ */
+#define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */
+#define PHYS_SDRAM_1 OMAP2420_SDRC_CS0
+#define PHYS_SDRAM_1_SIZE SZ_32M /* at least 32 meg */
+#define PHYS_SDRAM_2 OMAP2420_SDRC_CS1
+
+#define PHYS_FLASH_1 H4_CS0_BASE /* Flash Bank #1 */
+#define PHYS_FLASH_SIZE_1 SZ_32M
+#define PHYS_FLASH_2 (H4_CS0_BASE+SZ_32M) /* same cs, 2 chips in series */
+#define PHYS_FLASH_SIZE_2 SZ_32M
+#define CFG_FLASH_BASE PHYS_FLASH_1
+
+/*-----------------------------------------------------------------------
+ * FLASH and environment organization
+ */
+#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */
+#define CFG_MAX_FLASH_SECT (259) /* max number of sectors on one chip */
+
+#define CFG_ENV_ADDR (CFG_FLASH_BASE + SZ_128K)
+#define CFG_ENV_IS_IN_FLASH 1
+
+/* timeout values are in ticks */
+#define CFG_FLASH_ERASE_TOUT (10*75*CFG_HZ) /* Timeout for Flash Erase */
+#define CFG_FLASH_WRITE_TOUT (10*75*CFG_HZ) /* Timeout for Flash Write */
+
+#endif /* __CONFIG_H */
int pad7:24;
unsigned char scr; /* 7 */
int pad8:24;
-#if defined(CONFIG_OMAP1510) || defined(CONFIG_OMAP1610)
+#if defined(CONFIG_OMAP)
unsigned char mdr1; /* mode select reset TL16C750*/
#endif
#ifdef CONFIG_OMAP1510
/* for now: just dummy functions to satisfy the linker */
+#include <common.h>
+
void flush_cache (unsigned long dummy1, unsigned long dummy2)
{
+#ifdef CONFIG_OMAP2420
+ void arm1136_cache_flush(void);
+
+ arm1136_cache_flush();
+#endif
return;
}
projects / u-boot.git / commitdiff