ARM: imx8m: phycore_imx8mm: Drop bogus spl_board_init()

The current implementation of spl_board_init() is not correct,
the MX8MM BootROM v1 does not support SDP load when re-entered
from U-Boot SPL, it is up to U-Boot to perform the next stage
load using its own internal CI gadget driver and SDP protocol
implementation. Drop the spl_board_init() to let SPL continue
with normal load in case the SDP support is enabled.

Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Peng Fan <peng.fan@nxp.com>

diff --git a/board/phytec/phycore_imx8mm/spl.c b/board/phytec/phycore_imx8mm/spl.c
index d87ab6d4497f8487056169b2eef40825b7676592..1bae9b1170ddbc6db8086e95788ae98a4379e377 100644 (file)
--- a/board/phytec/phycore_imx8mm/spl.c
+++ b/board/phytec/phycore_imx8mm/spl.c
@@ -42,16 +42,6 @@ static void spl_dram_init(void)
        ddr_init(&dram_timing);
 }
 
-void spl_board_init(void)
-{
-       /* Serial download mode */
-       if (is_usb_boot()) {
-               puts("Back to ROM, SDP\n");
-               restore_boot_params();
-       }
-       puts("Normal Boot\n");
-}
-
 int board_fit_config_name_match(const char *name)
 {
        return 0;

diff --git a/configs/phycore-imx8mm_defconfig b/configs/phycore-imx8mm_defconfig
index 9b8c09a73abe696ac4e41f4858bf505eb59a1a8e..e8d7905bb4acf94c3105fc54389beeec5b4bb2a8 100644 (file)
--- a/configs/phycore-imx8mm_defconfig
+++ b/configs/phycore-imx8mm_defconfig
@@ -30,7 +30,6 @@ CONFIG_BOARD_LATE_INIT=y
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x910000
 CONFIG_SPL_BSS_MAX_SIZE=0x2000
-CONFIG_SPL_BOARD_INIT=y
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
 CONFIG_SPL_STACK=0x920000
 CONFIG_SYS_SPL_MALLOC=y