gd->bd->bi_baudrate is a copy of gd->baudrate.
Since baudrate is a common feature for all architectures,
keep gd->baudrate only.
It is true that bi_baudrate was passed to the kernel in that structure
but it was a long time ago.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Tom Rini <trini@ti.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Heiko Schocher <hs@denx.de>
Acked-by: Michal Simek <monstr@monstr.eu> (For microblaze)
#ifndef __ASSEMBLY__
typedef struct bd_info {
- unsigned int bi_baudrate; /* serial console baudrate */
ulong bi_arch_number; /* unique id for this board */
ulong bi_boot_params; /* where this board expects params */
unsigned long bi_arm_freq; /* arm frequency */
post_run(NULL, POST_ROM | post_bootmode_get(0));
#endif
- gd->bd->bi_baudrate = gd->baudrate;
/* Ram ist board specific, so move it to board code ... */
dram_init_banksize();
display_dram_config(); /* and display it */
#define __ASM_U_BOOT_H__ 1
typedef struct bd_info {
- unsigned int bi_baudrate;
unsigned char bi_phy_id[4];
unsigned long bi_board_number;
void *bi_boot_params;
*/
bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
bd->bi_dram[0].size = sdram_size;
- bd->bi_baudrate = gd->baudrate;
memcpy(new_gd, gd, sizeof(gd_t));
#define _U_BOOT_H_ 1
typedef struct bd_info {
- unsigned int bi_baudrate; /* serial console baudrate */
unsigned long bi_boot_params; /* where this board expects params */
unsigned long bi_memstart; /* start of DRAM memory */
phys_size_t bi_memsize; /* size of DRAM memory in bytes */
static int init_baudrate(void)
{
gd->baudrate = getenv_ulong("baudrate", 10, CONFIG_BAUDRATE);
- gd->bd->bi_baudrate = gd->baudrate;
return 0;
}
printf(" |-env_valid: %lx\n", gd->env_valid);
printf(" |-jt(%p): %p\n", gd->jt, *(gd->jt));
printf(" \\-bd: %p\n", gd->bd);
- printf(" |-bi_baudrate: %x\n", bd->bi_baudrate);
printf(" |-bi_boot_params: %lx\n", bd->bi_boot_params);
printf(" |-bi_memstart: %lx\n", bd->bi_memstart);
printf(" |-bi_memsize: %lx\n", bd->bi_memsize);
unsigned long bi_vcofreq; /* vco Freq in MHz */
unsigned long bi_flbfreq; /* Flexbus Freq in MHz */
#endif
- unsigned int bi_baudrate; /* Console Baudrate */
} bd_t;
#endif /* __ASSEMBLY__ */
bd->bi_vcofreq = gd->arch.vco_clk; /* vco Freq in Hz */
bd->bi_flbfreq = gd->arch.flb_clk; /* flexbus Freq in Hz */
#endif
- bd->bi_baudrate = gd->baudrate; /* Console Baudrate */
#ifdef CONFIG_SYS_EXTBDINFO
strncpy (bd->bi_s_version, "1.2", sizeof (bd->bi_s_version));
unsigned long bi_flashoffset; /* reserved area for startup monitor */
unsigned long bi_sramstart; /* start of SRAM memory */
unsigned long bi_sramsize; /* size of SRAM memory */
- unsigned int bi_baudrate; /* Console Baudrate */
ulong bi_boot_params; /* where this board expects params */
} bd_t;
memset((void *)bd, 0, GENERATED_BD_INFO_SIZE);
gd->bd = bd;
gd->baudrate = CONFIG_BAUDRATE;
- bd->bi_baudrate = CONFIG_BAUDRATE;
bd->bi_memstart = CONFIG_SYS_SDRAM_BASE;
bd->bi_memsize = CONFIG_SYS_SDRAM_SIZE;
gd->flags |= GD_FLG_RELOC; /* tell others: relocation done */
#else /* !CONFIG_SYS_GENERIC_BOARD */
typedef struct bd_info {
- unsigned int bi_baudrate; /* serial console baudrate */
unsigned long bi_arch_number; /* unique id for this board */
unsigned long bi_boot_params; /* where this board expects params */
unsigned long bi_memstart; /* start of DRAM memory */
*/
bd->bi_memstart = CONFIG_SYS_SDRAM_BASE; /* start of DRAM */
bd->bi_memsize = gd->ram_size; /* size of DRAM in bytes */
- bd->bi_baudrate = gd->baudrate; /* Console Baudrate */
memcpy(id, (void *)gd, sizeof(gd_t));
#include <environment.h>
typedef struct bd_info {
- unsigned int bi_baudrate; /* serial console baudrate */
unsigned long bi_arch_number; /* unique id for this board */
unsigned long bi_boot_params; /* where this board expects params */
unsigned long bi_memstart; /* start of DRAM memory */
addr_sp &= ~0x07;
debug("New Stack Pointer is: %08lx\n", addr_sp);
- gd->bd->bi_baudrate = gd->baudrate;
/* Ram isn't board specific, so move it to board code ... */
dram_init_banksize();
display_dram_config(); /* and display it */
unsigned long bi_flashoffset; /* reserved area for startup monitor */
unsigned long bi_sramstart; /* start of SRAM memory */
unsigned long bi_sramsize; /* size of SRAM memory */
- unsigned int bi_baudrate; /* Console Baudrate */
} bd_t;
/* For image.h:image_check_target_arch() */
bd->bi_sramstart = CONFIG_SYS_SRAM_BASE;
bd->bi_sramsize = CONFIG_SYS_SRAM_SIZE;
#endif
- bd->bi_baudrate = CONFIG_BAUDRATE;
for (init_fnc_ptr = init_sequence; *init_fnc_ptr; ++init_fnc_ptr) {
WATCHDOG_RESET();
#define _U_BOOT_H_
typedef struct bd_info {
- unsigned int bi_baudrate; /* serial console baudrate */
unsigned long bi_arch_number; /* unique id for this board */
unsigned long bi_boot_params; /* where this board expects params */
unsigned long bi_memstart; /* start of DRAM memory */
bd->bi_sramstart = CONFIG_SYS_SRAM_BASE;
bd->bi_sramsize = CONFIG_SYS_SRAM_SIZE;
#endif
- bd->bi_baudrate = CONFIG_BAUDRATE;
for (i = 0; i < ARRAY_SIZE(init_sequence); i++) {
WATCHDOG_RESET();
#ifdef CONFIG_CPM2
do_fixup_by_compat_u32(blob, "fsl,cpm2-scc-uart",
- "current-speed", bd->bi_baudrate, 1);
+ "current-speed", gd->baudrate, 1);
do_fixup_by_compat_u32(blob, "fsl,cpm2-brg",
"clock-frequency", bd->bi_brgfreq, 1);
unsigned long bi_ipbfreq; /* IPB Bus Freq, in MHz */
unsigned long bi_pcifreq; /* PCI Bus Freq, in MHz */
#endif
- unsigned int bi_baudrate; /* Console Baudrate */
#if defined(CONFIG_405) || \
defined(CONFIG_405GP) || \
defined(CONFIG_405EP) || \
bd->bi_ipbfreq = gd->arch.ipb_clk;
bd->bi_pcifreq = gd->pci_clk;
#endif /* CONFIG_MPC5xxx */
- bd->bi_baudrate = gd->baudrate; /* Console Baudrate */
#ifdef CONFIG_SYS_EXTBDINFO
strncpy((char *) bd->bi_s_version, "1.2", sizeof(bd->bi_s_version));
unsigned long bi_flashoffset; /* reserved area for startup monitor */
unsigned long bi_sramstart; /* start of SRAM memory */
unsigned long bi_sramsize; /* size of SRAM memory */
- unsigned int bi_baudrate; /* Console Baudrate */
unsigned long bi_boot_params; /* where this board expects params */
} bd_t;
bd->bi_sramstart = CONFIG_SYS_SRAM_BASE;
bd->bi_sramsize = CONFIG_SYS_SRAM_SIZE;
#endif
- bd->bi_baudrate = CONFIG_BAUDRATE;
for (init_fnc_ptr = init_sequence; *init_fnc_ptr; ++init_fnc_ptr) {
WATCHDOG_RESET();
unsigned short bi_ethspeed; /* Ethernet speed in Mbps */
unsigned long bi_intfreq; /* Internal Freq, in MHz */
unsigned long bi_busfreq; /* Bus Freq, in MHz */
- unsigned int bi_baudrate; /* Console Baudrate */
} bd_t;
#endif /* __ASSEMBLY__ */
bd->bi_sramstart = CONFIG_SYS_SRAM_BASE;
bd->bi_sramsize = CONFIG_SYS_SRAM_SIZE;
#endif
- bd->bi_baudrate = CONFIG_BAUDRATE;
bd->bi_bootflags = bootflag; /* boot / reboot flag (for LynxOS) */
gd->flags |= GD_FLG_RELOC; /* tell others: relocation done */
}
#if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT)
+DECLARE_GLOBAL_DATA_PTR;
+
/*
* update "memory" property in the blob
*/
/* baudrate */
nodeoffset = fdt_path_offset (blob, "/soc/cpm/serial");
if (nodeoffset >= 0) {
- speed = cpu_to_be32 (bd->bi_baudrate);
+ speed = cpu_to_be32 (gd->baudrate);
ret = fdt_setprop (blob, nodeoffset, "current-speed", &speed,
sizeof (unsigned long));
if (ret < 0)
u32 BoardType = get_BoardType ();
char *BoardName[2] = { "mvBlueBOX", "mvBlueLYNX" };
char *p;
- bd_t *bd = gd->bd;
hw_watchdog_reset ();
if ((p = getenv ("console_nr")) != NULL) {
unsigned long con_nr = simple_strtoul (p, NULL, 10) & 3;
- bd->bi_baudrate &= ~3;
- bd->bi_baudrate |= con_nr & 3;
+ gd->baudrate &= ~3;
+ gd->baudrate |= con_nr & 3;
}
return 0;
}
}
#endif
-static int setup_baud_rate(void)
-{
- /* Ick, can we get rid of this line? */
- gd->bd->bi_baudrate = gd->baudrate;
-
- return 0;
-}
-
static int setup_dram_config(void)
{
/* Ram is board specific, so move it to board code ... */
INIT_FUNC_WATCHDOG_RESET
setup_board_part2,
#endif
- setup_baud_rate,
display_new_sp,
#ifdef CONFIG_SYS_EXTBDINFO
setup_board_extra,
print_mhz("ethspeed", bd->bi_ethspeed);
#endif
printf("IP addr = %s\n", getenv("ipaddr"));
- printf("baudrate = %6u bps\n", bd->bi_baudrate);
+ printf("baudrate = %6u bps\n", gd->baudrate);
print_num("relocaddr", gd->relocaddr);
board_detail();
return 0;
printf("ip_addr = %s\n", getenv("ipaddr"));
#endif
- printf("baudrate = %u bps\n", bd->bi_baudrate);
+ printf("baudrate = %u bps\n", gd->baudrate);
return 0;
}
#if defined(CONFIG_CMD_NET)
print_eths();
#endif
- printf("baudrate = %u bps\n", bd->bi_baudrate);
+ printf("baudrate = %u bps\n", gd->baudrate);
return 0;
}
print_eth(0);
printf("ip_addr = %s\n", getenv("ipaddr"));
#endif
- printf("baudrate = %6u bps\n", bd->bi_baudrate);
+ printf("baudrate = %6u bps\n", gd->baudrate);
return 0;
}
printf("ip_addr = %s\n", getenv("ipaddr"));
#endif
- printf("baudrate = %u bps\n", bd->bi_baudrate);
+ printf("baudrate = %u bps\n", gd->baudrate);
return 0;
}
print_eth(0);
printf("ip_addr = %s\n", getenv("ipaddr"));
- printf("baudrate = %u bps\n", bd->bi_baudrate);
+ printf("baudrate = %u bps\n", gd->baudrate);
return 0;
}
print_eth(0);
printf("ip_addr = %s\n", getenv("ipaddr"));
- printf("baudrate = %u bps\n", bd->bi_baudrate);
+ printf("baudrate = %u bps\n", gd->baudrate);
return 0;
}
print_eth(0);
printf("ip_addr = %s\n", getenv("ipaddr"));
- printf("baudrate = %u bps\n", bd->bi_baudrate);
+ printf("baudrate = %u bps\n", gd->baudrate);
return 0;
}
#if defined(CONFIG_CMD_NET)
print_eths();
#endif
- printf("baudrate = %u bps\n", bd->bi_baudrate);
+ printf("baudrate = %u bps\n", gd->baudrate);
#if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
print_num("TLB addr", gd->arch.tlb_addr);
#endif
print_eth(0);
printf("ip_addr = %s\n", getenv("ipaddr"));
#endif
- printf("baudrate = %u bps\n", bd->bi_baudrate);
+ printf("baudrate = %u bps\n", gd->baudrate);
return 0;
}
printf("ip_addr = %s\n", getenv("ipaddr"));
print_mhz("ethspeed", bd->bi_ethspeed);
#endif
- printf("baudrate = %u bps\n", bd->bi_baudrate);
+ printf("baudrate = %u bps\n", gd->baudrate);
return 0;
}
print_eth(0);
printf("ip_addr = %s\n", getenv("ipaddr"));
#endif
- printf("baudrate = %u bps\n", bd->bi_baudrate);
+ printf("baudrate = %u bps\n", gd->baudrate);
return 0;
}
printf("ip_addr = %s\n", getenv("ipaddr"));
#endif
- printf("baudrate = %u bps\n", bd->bi_baudrate);
+ printf("baudrate = %u bps\n", gd->baudrate);
return 0;
}
print_eth(0);
printf("ip_addr = %s\n", getenv("ipaddr"));
#endif
- printf("baudrate = %d bps\n", bd->bi_baudrate);
+ printf("baudrate = %d bps\n", gd->baudrate);
return 0;
}
}
gd->baudrate = baudrate;
-#if defined(CONFIG_PPC) || defined(CONFIG_MCF52x2)
- gd->bd->bi_baudrate = baudrate;
-#endif
serial_setbrg();
unsigned char c;
int ret, saved_baud, b;
struct serial_device *saved_dev, *s;
- bd_t *bd = gd->bd;
/* Save current serial state */
ret = 0;
saved_dev = serial_current;
- saved_baud = bd->bi_baudrate;
+ saved_baud = gd->baudrate;
for (s = serial_devices; s; s = s->next) {
/* If this driver doesn't support loop back, skip it */
/* Test every available baud rate */
for (b = 0; b < ARRAY_SIZE(bauds); ++b) {
- bd->bi_baudrate = bauds[b];
+ gd->baudrate = bauds[b];
serial_setbrg();
/*
done:
/* Restore previous serial state */
serial_current = saved_dev;
- bd->bi_baudrate = saved_baud;
+ gd->baudrate = saved_baud;
serial_reinit_all();
serial_setbrg();
unsigned long bi_ipbfreq; /* IPB Bus Freq, in MHz */
unsigned long bi_pcifreq; /* PCI Bus Freq, in MHz */
#endif
- unsigned int bi_baudrate; /* Console Baudrate */
#if defined(CONFIG_405) || \
defined(CONFIG_405GP) || \
defined(CONFIG_405EP) || \
projects / u-boot.git / commitdiff