]> git.dujemihanovic.xyz Git - u-boot.git/commitdiff
ARM: davinci: remove support for cam_enc_4xx
authorMasahiro Yamada <yamada.masahiro@socionext.com>
Thu, 20 Aug 2015 01:20:55 +0000 (10:20 +0900)
committerTom Rini <trini@konsulko.com>
Thu, 20 Aug 2015 16:55:50 +0000 (12:55 -0400)
This has not been converted to Generic Board, so should be removed.
(See doc/README.generic-board for details.)

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Heiko Schocher <hs@denx.de>
Acked-by: Marek Vasut <marex@denx.de>
arch/arm/mach-davinci/Kconfig
board/ait/cam_enc_4xx/Kconfig [deleted file]
board/ait/cam_enc_4xx/MAINTAINERS [deleted file]
board/ait/cam_enc_4xx/Makefile [deleted file]
board/ait/cam_enc_4xx/cam_enc_4xx.c [deleted file]
board/ait/cam_enc_4xx/config.mk [deleted file]
board/ait/cam_enc_4xx/u-boot-spl.lds [deleted file]
board/ait/cam_enc_4xx/ublimage.cfg [deleted file]
configs/cam_enc_4xx_defconfig [deleted file]
doc/README.scrapyard
include/configs/cam_enc_4xx.h [deleted file]

index e6cb390d1722eab86cfcb3e45874749148b93b26..681270ddd2e3c176e89b9ceff72772bad8086255 100644 (file)
@@ -18,10 +18,6 @@ config TARGET_DA850EVM
        bool "DA850 EVM board"
        select SUPPORT_SPL
 
-config TARGET_CAM_ENC_4XX
-       bool "CAM ENC 4xx board"
-       select SUPPORT_SPL
-
 config TARGET_OMAPL138_LCDK
        bool "OMAPL138 LCDK"
        select SUPPORT_SPL
@@ -62,7 +58,6 @@ config SYS_SOC
        default "davinci"
 
 source "board/enbw/enbw_cmc/Kconfig"
-source "board/ait/cam_enc_4xx/Kconfig"
 source "board/Barix/ipam390/Kconfig"
 source "board/davinci/da8xxevm/Kconfig"
 source "board/davinci/dm355evm/Kconfig"
diff --git a/board/ait/cam_enc_4xx/Kconfig b/board/ait/cam_enc_4xx/Kconfig
deleted file mode 100644 (file)
index 64e18f4..0000000
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_CAM_ENC_4XX
-
-config SYS_BOARD
-       default "cam_enc_4xx"
-
-config SYS_VENDOR
-       default "ait"
-
-config SYS_CONFIG_NAME
-       default "cam_enc_4xx"
-
-endif
diff --git a/board/ait/cam_enc_4xx/MAINTAINERS b/board/ait/cam_enc_4xx/MAINTAINERS
deleted file mode 100644 (file)
index d6477c6..0000000
+++ /dev/null
@@ -1,6 +0,0 @@
-CAM_ENC_4XX BOARD
-M:     Heiko Schocher <hs@denx.de>
-S:     Maintained
-F:     board/ait/cam_enc_4xx/
-F:     include/configs/cam_enc_4xx.h
-F:     configs/cam_enc_4xx_defconfig
diff --git a/board/ait/cam_enc_4xx/Makefile b/board/ait/cam_enc_4xx/Makefile
deleted file mode 100644 (file)
index 0d03ce0..0000000
+++ /dev/null
@@ -1,10 +0,0 @@
-#
-# (C) Copyright 2000, 2001, 2002
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
-#
-# SPDX-License-Identifier:     GPL-2.0+
-#
-
-obj-y  := cam_enc_4xx.o
diff --git a/board/ait/cam_enc_4xx/cam_enc_4xx.c b/board/ait/cam_enc_4xx/cam_enc_4xx.c
deleted file mode 100644 (file)
index c5687ba..0000000
+++ /dev/null
@@ -1,1106 +0,0 @@
-/*
- * Copyright (C) 2009 Texas Instruments Incorporated
- *
- * Copyright (C) 2011
- * Heiko Schocher, DENX Software Engineering, hs@denx.de.
- *
- * SPDX-License-Identifier:    GPL-2.0+
- */
-
-#include <common.h>
-#include <cli.h>
-#include <errno.h>
-#include <linux/mtd/nand.h>
-#include <nand.h>
-#include <miiphy.h>
-#include <netdev.h>
-#include <asm/io.h>
-#include <asm/arch/hardware.h>
-#include <asm/ti-common/davinci_nand.h>
-#include <asm/arch/davinci_misc.h>
-#ifdef CONFIG_DAVINCI_MMC
-#include <mmc.h>
-#include <asm/arch/sdmmc_defs.h>
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#ifndef CONFIG_SPL_BUILD
-static struct davinci_timer *timer =
-       (struct davinci_timer *)DAVINCI_TIMER3_BASE;
-
-static unsigned long get_timer_val(void)
-{
-       unsigned long now = readl(&timer->tim34);
-
-       return now;
-}
-
-static int timer_running(void)
-{
-       return readl(&timer->tcr) &
-               (DV_TIMER_TCR_ENAMODE_MASK << DV_TIMER_TCR_ENAMODE34_SHIFT);
-}
-
-static void stop_timer(void)
-{
-       writel(0x0, &timer->tcr);
-       return;
-}
-
-int checkboard(void)
-{
-       printf("Board: AIT CAM ENC 4XX\n");
-       return 0;
-}
-
-int board_init(void)
-{
-       gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
-
-       return 0;
-}
-
-#ifdef CONFIG_DRIVER_TI_EMAC
-static int cam_enc_4xx_check_network(void)
-{
-       char *s;
-
-       s = getenv("ethaddr");
-       if (!s)
-               return -EINVAL;
-
-       if (!is_valid_ethaddr((const u8 *)s))
-               return -EINVAL;
-
-       s = getenv("ipaddr");
-       if (!s)
-               return -EINVAL;
-
-       s = getenv("netmask");
-       if (!s)
-               return -EINVAL;
-
-       s = getenv("serverip");
-       if (!s)
-               return -EINVAL;
-
-       s = getenv("gatewayip");
-       if (!s)
-               return -EINVAL;
-
-       return 0;
-}
-int board_eth_init(bd_t *bis)
-{
-       int ret;
-
-       ret = cam_enc_4xx_check_network();
-       if (ret)
-               return ret;
-
-       davinci_emac_initialize();
-
-       return 0;
-}
-#endif
-
-#ifdef CONFIG_NAND_DAVINCI
-static int
-davinci_std_read_page_syndrome(struct mtd_info *mtd, struct nand_chip *chip,
-                                  uint8_t *buf, int oob_required, int page)
-{
-       struct nand_chip *this = mtd->priv;
-       int i, eccsize = chip->ecc.size;
-       int eccbytes = chip->ecc.bytes;
-       int eccsteps = chip->ecc.steps;
-       uint8_t *p = buf;
-       uint8_t *oob = chip->oob_poi;
-
-       chip->cmdfunc(mtd, NAND_CMD_READOOB, 0x0, page & this->pagemask);
-
-       chip->read_buf(mtd, oob, mtd->oobsize);
-
-       chip->cmdfunc(mtd, NAND_CMD_READ0, 0x0, page & this->pagemask);
-
-
-       for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) {
-               int stat;
-
-               chip->ecc.hwctl(mtd, NAND_ECC_READ);
-               chip->read_buf(mtd, p, eccsize);
-               chip->ecc.hwctl(mtd, NAND_ECC_READSYN);
-
-               if (chip->ecc.prepad)
-                       oob += chip->ecc.prepad;
-
-               stat = chip->ecc.correct(mtd, p, oob, NULL);
-
-               if (stat == -1)
-                       mtd->ecc_stats.failed++;
-               else
-                       mtd->ecc_stats.corrected += stat;
-
-               oob += eccbytes;
-
-               if (chip->ecc.postpad)
-                       oob += chip->ecc.postpad;
-       }
-
-       /* Calculate remaining oob bytes */
-       i = mtd->oobsize - (oob - chip->oob_poi);
-       if (i)
-               chip->read_buf(mtd, oob, i);
-
-       return 0;
-}
-
-static int davinci_std_write_page_syndrome(struct mtd_info *mtd,
-                                   struct nand_chip *chip, const uint8_t *buf,
-                                   int oob_required)
-{
-       unsigned char davinci_ecc_buf[NAND_MAX_OOBSIZE];
-       struct nand_chip *this = mtd->priv;
-       int i, eccsize = chip->ecc.size;
-       int eccbytes = chip->ecc.bytes;
-       int eccsteps = chip->ecc.steps;
-       int chunk = chip->ecc.bytes + chip->ecc.prepad + chip->ecc.postpad;
-       int offset = 0;
-       const uint8_t *p = buf;
-       uint8_t *oob = chip->oob_poi;
-
-       for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) {
-               chip->ecc.hwctl(mtd, NAND_ECC_WRITE);
-               chip->write_buf(mtd, p, eccsize);
-
-               /* Calculate ECC without prepad */
-               chip->ecc.calculate(mtd, p, oob + chip->ecc.prepad);
-
-               if (chip->ecc.prepad) {
-                       offset = (chip->ecc.steps - eccsteps) * chunk;
-                       memcpy(&davinci_ecc_buf[offset], oob, chip->ecc.prepad);
-                       oob += chip->ecc.prepad;
-               }
-
-               offset = ((chip->ecc.steps - eccsteps) * chunk) +
-                               chip->ecc.prepad;
-               memcpy(&davinci_ecc_buf[offset], oob, eccbytes);
-               oob += eccbytes;
-
-               if (chip->ecc.postpad) {
-                       offset = ((chip->ecc.steps - eccsteps) * chunk) +
-                                       chip->ecc.prepad + eccbytes;
-                       memcpy(&davinci_ecc_buf[offset], oob,
-                               chip->ecc.postpad);
-                       oob += chip->ecc.postpad;
-               }
-       }
-
-       /*
-        * Write the sparebytes into the page once
-        * all eccsteps have been covered
-        */
-       for (i = 0; i < mtd->oobsize; i++)
-               writeb(davinci_ecc_buf[i], this->IO_ADDR_W);
-
-       /* Calculate remaining oob bytes */
-       i = mtd->oobsize - (oob - chip->oob_poi);
-       if (i)
-               chip->write_buf(mtd, oob, i);
-       return 0;
-}
-
-static int davinci_std_write_oob_syndrome(struct mtd_info *mtd,
-                                  struct nand_chip *chip, int page)
-{
-       int pos, status = 0;
-       const uint8_t *bufpoi = chip->oob_poi;
-
-       pos = mtd->writesize;
-
-       chip->cmdfunc(mtd, NAND_CMD_SEQIN, pos, page);
-
-       chip->write_buf(mtd, bufpoi, mtd->oobsize);
-
-       chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1);
-       status = chip->waitfunc(mtd, chip);
-
-       return status & NAND_STATUS_FAIL ? -1 : 0;
-}
-
-static int davinci_std_read_oob_syndrome(struct mtd_info *mtd,
-       struct nand_chip *chip, int page)
-{
-       struct nand_chip *this = mtd->priv;
-       uint8_t *buf = chip->oob_poi;
-       uint8_t *bufpoi = buf;
-
-       chip->cmdfunc(mtd, NAND_CMD_READOOB, 0x0, page & this->pagemask);
-
-       chip->read_buf(mtd, bufpoi, mtd->oobsize);
-
-       return 0;
-}
-
-static void nand_dm365evm_select_chip(struct mtd_info *mtd, int chip)
-{
-       struct nand_chip        *this = mtd->priv;
-       unsigned long           wbase = (unsigned long) this->IO_ADDR_W;
-       unsigned long           rbase = (unsigned long) this->IO_ADDR_R;
-
-       if (chip == 1) {
-               __set_bit(14, &wbase);
-               __set_bit(14, &rbase);
-       } else {
-               __clear_bit(14, &wbase);
-               __clear_bit(14, &rbase);
-       }
-       this->IO_ADDR_W = (void *)wbase;
-       this->IO_ADDR_R = (void *)rbase;
-}
-
-int board_nand_init(struct nand_chip *nand)
-{
-       davinci_nand_init(nand);
-       nand->select_chip = nand_dm365evm_select_chip;
-
-       return 0;
-}
-
-struct nand_ecc_ctrl org_ecc;
-static int notsaved = 1;
-
-static int nand_switch_hw_func(int mode)
-{
-       struct nand_chip *nand;
-       struct mtd_info *mtd;
-
-       if (nand_curr_device < 0 ||
-           nand_curr_device >= CONFIG_SYS_MAX_NAND_DEVICE ||
-           !nand_info[nand_curr_device].name) {
-               printf("Error: Can't switch hw functions," \
-                       " no devices available\n");
-               return -1;
-       }
-
-       mtd = &nand_info[nand_curr_device];
-       nand = mtd->priv;
-
-       if (mode == 0) {
-               if (notsaved == 0) {
-                       printf("switching to uboot hw functions.\n");
-                       memcpy(&nand->ecc, &org_ecc,
-                               sizeof(struct nand_ecc_ctrl));
-               }
-       } else {
-               /* RBL */
-               printf("switching to RBL hw functions.\n");
-               if (notsaved == 1) {
-                       memcpy(&org_ecc, &nand->ecc,
-                               sizeof(struct nand_ecc_ctrl));
-                       notsaved = 0;
-               }
-               nand->ecc.mode = NAND_ECC_HW_SYNDROME;
-               nand->ecc.prepad = 6;
-               nand->ecc.read_page = davinci_std_read_page_syndrome;
-               nand->ecc.write_page = davinci_std_write_page_syndrome;
-               nand->ecc.read_oob = davinci_std_read_oob_syndrome;
-               nand->ecc.write_oob = davinci_std_write_oob_syndrome;
-       }
-       return mode;
-}
-
-static int hwmode;
-
-static int do_switch_ecc(cmd_tbl_t *cmdtp, int flag, int argc,
-               char *const argv[])
-{
-       if (argc != 2)
-               goto usage;
-       if (strncmp(argv[1], "rbl", 2) == 0)
-               hwmode = nand_switch_hw_func(1);
-       else if (strncmp(argv[1], "uboot", 2) == 0)
-               hwmode = nand_switch_hw_func(0);
-       else
-               goto usage;
-
-       return 0;
-
-usage:
-       printf("Usage: nandrbl %s\n", cmdtp->usage);
-       return 1;
-}
-
-U_BOOT_CMD(
-       nandrbl, 2, 1,  do_switch_ecc,
-       "switch between rbl/uboot NAND ECC calculation algorithm",
-       "[rbl/uboot] - Switch between rbl/uboot NAND ECC algorithm"
-);
-
-
-#endif /* #ifdef CONFIG_NAND_DAVINCI */
-
-#ifdef CONFIG_DAVINCI_MMC
-static struct davinci_mmc mmc_sd0 = {
-       .reg_base       = (struct davinci_mmc_regs *)DAVINCI_MMC_SD0_BASE,
-       .input_clk      = 121500000,
-       .host_caps      = MMC_MODE_4BIT,
-       .voltages       = MMC_VDD_32_33 | MMC_VDD_33_34,
-       .version        = MMC_CTLR_VERSION_2,
-};
-
-int board_mmc_init(bd_t *bis)
-{
-       int err;
-
-       /* Add slot-0 to mmc subsystem */
-       err = davinci_mmc_init(bis, &mmc_sd0);
-
-       return err;
-}
-#endif
-
-int board_late_init(void)
-{
-       struct davinci_gpio *gpio = davinci_gpio_bank45;
-
-       /* 24MHz InputClock / 15 prediv -> 1.6 MHz timer running */
-       while ((get_timer_val() < CONFIG_AIT_TIMER_TIMEOUT) &&
-               timer_running())
-               ;
-
-       /* 1 sec reached -> stop timer, clear all LED */
-       stop_timer();
-       clrbits_le32(&gpio->out_data, CONFIG_CAM_ENC_LED_MASK);
-       return 0;
-}
-
-void reset_phy(void)
-{
-       char *name = "GENERIC @ 0x00";
-
-       /* reset the phy */
-       miiphy_reset(name, 0x0);
-}
-
-#else /* #ifndef CONFIG_SPL_BUILD */
-static void cam_enc_4xx_set_all_led(void)
-{
-       struct davinci_gpio *gpio = davinci_gpio_bank45;
-
-       setbits_le32(&gpio->out_data, CONFIG_CAM_ENC_LED_MASK);
-}
-
-/*
- * TIMER 0 is used for tick
- */
-static struct davinci_timer *timer =
-       (struct davinci_timer *)DAVINCI_TIMER3_BASE;
-
-#define TIMER_LOAD_VAL 0xffffffff
-#define TIM_CLK_DIV    16
-
-static int cam_enc_4xx_timer_init(void)
-{
-       /* We are using timer34 in unchained 32-bit mode, full speed */
-       writel(0x0, &timer->tcr);
-       writel(0x0, &timer->tgcr);
-       writel(0x06 | ((TIM_CLK_DIV - 1) << 8), &timer->tgcr);
-       writel(0x0, &timer->tim34);
-       writel(TIMER_LOAD_VAL, &timer->prd34);
-       writel(2 << 22, &timer->tcr);
-       return 0;
-}
-
-void board_gpio_init(void)
-{
-       struct davinci_gpio *gpio;
-
-       cam_enc_4xx_set_all_led();
-       cam_enc_4xx_timer_init();
-       gpio = davinci_gpio_bank01;
-       clrbits_le32(&gpio->dir, ~0xfdfffffe);
-       /* clear LED D14 = GPIO25 */
-       clrbits_le32(&gpio->out_data, 0x02000000);
-       gpio = davinci_gpio_bank23;
-       clrbits_le32(&gpio->dir, ~0x5ff0afef);
-       /* set GPIO61 to 1 -> intern UART0 as Console */
-       setbits_le32(&gpio->out_data, 0x20000000);
-       /*
-        * PHY out of reset GIO 50 = 1
-        * NAND WP off GIO 51 = 1
-        */
-       setbits_le32(&gpio->out_data, 0x000c0004);
-       gpio = davinci_gpio_bank45;
-       clrbits_le32(&gpio->dir, ~(0xdb2fffff) | CONFIG_CAM_ENC_LED_MASK);
-       /*
-        * clear LED:
-        * D17 = GPIO86
-        * D11 = GPIO87
-        * GPIO88
-        * GPIO89
-        * D13 = GPIO90
-        * GPIO91
-        */
-       clrbits_le32(&gpio->out_data, CONFIG_CAM_ENC_LED_MASK);
-       gpio = davinci_gpio_bank67;
-       clrbits_le32(&gpio->dir, ~0x000007ff);
-}
-
-/*
- * functions for the post memory test.
- */
-int arch_memory_test_prepare(u32 *vstart, u32 *size, phys_addr_t *phys_offset)
-{
-       *vstart = CONFIG_SYS_SDRAM_BASE;
-       *size = PHYS_SDRAM_1_SIZE;
-       *phys_offset = 0;
-       return 0;
-}
-
-void arch_memory_failure_handle(void)
-{
-       cam_enc_4xx_set_all_led();
-       puts("mem failure\n");
-       while (1)
-               ;
-}
-#endif
-#if defined(CONFIG_MENU)
-#include "menu.h"
-
-#define MENU_EXIT              -1
-#define MENU_EXIT_BOOTCMD      -2
-#define MENU_STAY              0
-#define MENU_MAIN              1
-#define MENU_UPDATE            2
-#define MENU_NETWORK           3
-#define MENU_LOAD              4
-
-static int menu_start;
-
-#define FIT_SUBTYPE_UNKNOWN            0
-#define FIT_SUBTYPE_UBL_HEADER         1
-#define FIT_SUBTYPE_SPL_IMAGE          2
-#define FIT_SUBTYPE_UBOOT_IMAGE                3
-#define FIT_SUBTYPE_DF_ENV_IMAGE       4
-#define FIT_SUBTYPE_RAMDISK_IMAGE      5
-
-struct fit_images_info {
-       u_int8_t type;
-       int subtype;
-       char desc[200];
-       const void *data;
-       size_t size;
-};
-
-static struct fit_images_info imgs[10];
-
-struct menu_display {
-       char    title[50];
-       int     timeout; /* in sec */
-       int     id; /* MENU_* */
-       char    **menulist;
-       int (*menu_evaluate)(char *choice);
-};
-
-char *menu_main[] = {
-       "(1) Boot",
-       "(2) Update Software",
-       "(3) Reset to default setting and boot",
-       "(4) Enter U-Boot console",
-       NULL
-};
-
-char *menu_update[] = {
-       "(1) Network settings",
-       "(2) load image",
-       "(3) back to main",
-       NULL
-};
-
-char *menu_load[] = {
-       "(1) install image",
-       "(2) cancel",
-       NULL
-};
-
-char *menu_network[] = {
-       "(1) ipaddr   ",
-       "(2) netmask  ",
-       "(3) serverip ",
-       "(4) gatewayip",
-       "(5) tftp image name",
-       "(6) back to update software",
-       NULL
-};
-
-static void ait_menu_print(void *data)
-{
-       printf("%s\n", (char *)data);
-       return;
-}
-
-static char *menu_handle(struct menu_display *display)
-{
-       struct menu *m;
-       int i;
-       void *choice = NULL;
-       char key[2];
-       int ret;
-       char *s;
-       char temp[6][200];
-
-       m = menu_create(display->title, display->timeout, 1, ait_menu_print,
-                       NULL, NULL);
-
-       for (i = 0; display->menulist[i]; i++) {
-               sprintf(key, "%d", i + 1);
-               if (display->id == MENU_NETWORK) {
-                       switch (i) {
-                       case 0:
-                               s = getenv("ipaddr");
-                               break;
-                       case 1:
-                               s = getenv("netmask");
-                               break;
-                       case 2:
-                               s = getenv("serverip");
-                               break;
-                       case 3:
-                               s = getenv("gatewayip");
-                               break;
-                       case 4:
-                               s = getenv("img_file");
-                               break;
-                       default:
-                               s = NULL;
-                               break;
-                       }
-                       if (s) {
-                               sprintf(temp[i], "%s: %s",
-                                       display->menulist[i], s);
-                               ret = menu_item_add(m, key, temp[i]);
-                       } else {
-                               ret = menu_item_add(m, key,
-                                       display->menulist[i]);
-                       }
-               } else {
-                       ret = menu_item_add(m, key, display->menulist[i]);
-               }
-
-               if (ret != 1) {
-                       printf("failed to add item!");
-                       menu_destroy(m);
-                       return NULL;
-               }
-       }
-       sprintf(key, "%d", 1);
-       menu_default_set(m, key);
-
-       if (menu_get_choice(m, &choice) != 1)
-               debug("Problem picking a choice!\n");
-
-       menu_destroy(m);
-
-       return choice;
-}
-
-static int ait_menu_show(struct menu_display *display, int bootdelay)
-{
-       int end = MENU_STAY;
-       char *choice;
-
-       if ((menu_start == 0) && (display->id == MENU_MAIN))
-               display->timeout = bootdelay;
-       else
-               display->timeout = 0;
-
-       while (end == MENU_STAY) {
-               choice = menu_handle(display);
-               if (choice)
-                       end = display->menu_evaluate(choice);
-
-               if (end == display->id)
-                       end = MENU_STAY;
-               if (display->id == MENU_MAIN) {
-                       if (menu_start == 0)
-                               end = MENU_EXIT_BOOTCMD;
-                       else
-                               display->timeout = 0;
-               }
-       }
-       return end;
-}
-
-static int ait_writeublheader(void)
-{
-       char s[20];
-       unsigned long i;
-       int ret;
-
-       for (i = CONFIG_SYS_NAND_BLOCK_SIZE;
-               i < CONFIG_SYS_NAND_U_BOOT_OFFS;
-               i += CONFIG_SYS_NAND_BLOCK_SIZE) {
-               sprintf(s, "%lx", i);
-               ret = setenv("header_addr", s);
-               if (ret == 0)
-                       ret = run_command("run img_writeheader", 0);
-               if (ret != 0)
-                       break;
-       }
-       return ret;
-}
-
-static int ait_menu_install_images(void)
-{
-       int ret = 0;
-       int count = 0;
-       char s[100];
-       char *t;
-
-       /*
-        * possible image types:
-        * FIT_SUBTYPE_UNKNOWN
-        * FIT_SUBTYPE_UBL_HEADER
-        * FIT_SUBTYPE_SPL_IMAGE
-        * FIT_SUBTYPE_UBOOT_IMAGE
-        * FIT_SUBTYPE_DF_ENV_IMAGE
-        * FIT_SUBTYPE_RAMDISK_IMAGE
-        *
-        * use Envvariables:
-        * img_addr_r: image start addr
-        * header_addr: addr where to write to UBL header
-        * img_writeheader: write ubl header to nand
-        * img_writespl: write spl to nand
-        * img_writeuboot: write uboot to nand
-        * img_writedfenv: write default environment to ubi volume
-        * img_volume: which ubi volume should be updated with img_writeramdisk
-        * filesize: size of data for updating ubi volume
-        * img_writeramdisk: write ramdisk to ubi volume
-        */
-
-       while (imgs[count].type != IH_TYPE_INVALID) {
-               printf("Installing %s\n",
-                       genimg_get_type_name(imgs[count].type));
-               sprintf(s, "%p", imgs[count].data);
-               setenv("img_addr_r", s);
-               sprintf(s, "%lx", (unsigned long)imgs[count].size);
-               setenv("filesize", s);
-               switch (imgs[count].subtype) {
-               case FIT_SUBTYPE_DF_ENV_IMAGE:
-                       ret = run_command("run img_writedfenv", 0);
-                       break;
-               case FIT_SUBTYPE_RAMDISK_IMAGE:
-                       t = getenv("img_volume");
-                       if (!t) {
-                               ret = setenv("img_volume", "rootfs1");
-                       } else {
-                               /* switch to other volume */
-                               if (strncmp(t, "rootfs1", 7) == 0)
-                                       ret = setenv("img_volume", "rootfs2");
-                               else
-                                       ret = setenv("img_volume", "rootfs1");
-                       }
-                       if (ret != 0)
-                               break;
-
-                       ret = run_command("run img_writeramdisk", 0);
-                       break;
-               case FIT_SUBTYPE_SPL_IMAGE:
-                       ret = run_command("run img_writespl", 0);
-                       break;
-               case FIT_SUBTYPE_UBL_HEADER:
-                       ret = ait_writeublheader();
-                       break;
-               case FIT_SUBTYPE_UBOOT_IMAGE:
-                       ret = run_command("run img_writeuboot", 0);
-                       break;
-               default:
-                       /* not supported type */
-                       break;
-               }
-               count++;
-       }
-       /* now save dvn_* and img_volume env vars to new values */
-       if (ret == 0) {
-               t = getenv("x_dvn_boot_vers");
-               if (t)
-                       setenv("dvn_boot_vers", t);
-
-               t = getenv("x_dvn_app_vers");
-               if (t)
-                       setenv("dvn_boot_vers", t);
-
-               setenv("x_dvn_boot_vers", NULL);
-               setenv("x_dvn_app_vers", NULL);
-               ret = run_command("run savenewvers", 0);
-       }
-
-       return ret;
-}
-
-static int ait_menu_evaluate_load(char *choice)
-{
-       if (!choice)
-               return -1;
-
-       switch (choice[1]) {
-       case '1':
-               /* install image */
-               ait_menu_install_images();
-               break;
-       case '2':
-               /* cancel, back to main */
-               setenv("x_dvn_boot_vers", NULL);
-               setenv("x_dvn_app_vers", NULL);
-               break;
-       }
-
-       return MENU_MAIN;
-}
-
-struct menu_display ait_load = {
-       .title = "AIT load image",
-       .timeout = 0,
-       .id = MENU_LOAD,
-       .menulist = menu_load,
-       .menu_evaluate = ait_menu_evaluate_load,
-};
-
-static void ait_menu_read_env(char *name)
-{
-       char output[CONFIG_SYS_CBSIZE];
-       char cbuf[CONFIG_SYS_CBSIZE];
-       int readret;
-       int ret;
-
-       sprintf(output, "%s old: %s value: ", name, getenv(name));
-       memset(cbuf, 0, CONFIG_SYS_CBSIZE);
-       readret = cli_readline_into_buffer(output, cbuf, 0);
-
-       if (readret >= 0) {
-               ret = setenv(name, cbuf);
-               if (ret) {
-                       printf("Error setting %s\n", name);
-                       return;
-               }
-       }
-       return;
-}
-
-static int ait_menu_evaluate_network(char *choice)
-{
-       if (!choice)
-               return MENU_MAIN;
-
-       switch (choice[1]) {
-       case '1':
-               ait_menu_read_env("ipaddr");
-               break;
-       case '2':
-               ait_menu_read_env("netmask");
-               break;
-       case '3':
-               ait_menu_read_env("serverip");
-               break;
-       case '4':
-               ait_menu_read_env("gatewayip");
-               break;
-       case '5':
-               ait_menu_read_env("img_file");
-               break;
-       case '6':
-               return MENU_UPDATE;
-               break;
-       }
-
-       return MENU_STAY;
-}
-
-struct menu_display ait_network = {
-       .title = "AIT network settings",
-       .timeout = 0,
-       .id = MENU_NETWORK,
-       .menulist = menu_network,
-       .menu_evaluate = ait_menu_evaluate_network,
-};
-
-static int fit_get_subtype(const void *fit, int noffset, char **subtype)
-{
-       int len;
-
-       *subtype = (char *)fdt_getprop(fit, noffset, "subtype", &len);
-       if (*subtype == NULL)
-               return -1;
-
-       return 0;
-}
-
-static int ait_subtype_nr(char *subtype)
-{
-       int ret = FIT_SUBTYPE_UNKNOWN;
-
-       if (!strncmp("ublheader", subtype, strlen("ublheader")))
-               return FIT_SUBTYPE_UBL_HEADER;
-       if (!strncmp("splimage", subtype, strlen("splimage")))
-               return FIT_SUBTYPE_SPL_IMAGE;
-       if (!strncmp("ubootimage", subtype, strlen("ubootimage")))
-               return FIT_SUBTYPE_UBOOT_IMAGE;
-       if (!strncmp("dfenvimage", subtype, strlen("dfenvimage")))
-               return FIT_SUBTYPE_DF_ENV_IMAGE;
-
-       return ret;
-}
-
-static int ait_menu_check_image(void)
-{
-       char *s;
-       unsigned long fit_addr;
-       void *addr;
-       int format;
-       char *desc;
-       char *subtype;
-       int images_noffset;
-       int noffset;
-       int ndepth;
-       int count = 0;
-       int ret;
-       int i;
-       int found_uboot = -1;
-       int found_ramdisk = -1;
-
-       memset(imgs, 0, sizeof(imgs));
-       s = getenv("fit_addr_r");
-       fit_addr = s ? (unsigned long)simple_strtol(s, NULL, 16) : \
-                       CONFIG_BOARD_IMG_ADDR_R;
-
-       addr = (void *)fit_addr;
-       /* check if it is a FIT image */
-       format = genimg_get_format(addr);
-       if (format != IMAGE_FORMAT_FIT)
-               return -EINVAL;
-
-       if (!fit_check_format(addr))
-               return -EINVAL;
-
-       /* print the FIT description */
-       ret = fit_get_desc(addr, 0, &desc);
-       printf("FIT description: ");
-       if (ret)
-               printf("unavailable\n");
-       else
-               printf("%s\n", desc);
-
-       /* find images */
-       images_noffset = fdt_path_offset(addr, FIT_IMAGES_PATH);
-       if (images_noffset < 0) {
-               printf("Can't find images parent node '%s' (%s)\n",
-                       FIT_IMAGES_PATH, fdt_strerror(images_noffset));
-               return -EINVAL;
-       }
-
-       /* Process its subnodes, print out component images details */
-       for (ndepth = 0, count = 0,
-               noffset = fdt_next_node(addr, images_noffset, &ndepth);
-               (noffset >= 0) && (ndepth > 0);
-               noffset = fdt_next_node(addr, noffset, &ndepth)) {
-               if (ndepth == 1) {
-                       /*
-                        * Direct child node of the images parent node,
-                        * i.e. component image node.
-                        */
-                       printf("Image %u (%s)\n", count,
-                                       fit_get_name(addr, noffset, NULL));
-
-                       fit_image_print(addr, noffset, "");
-
-                       fit_image_get_type(addr, noffset,
-                               &imgs[count].type);
-                       /* Mandatory properties */
-                       ret = fit_get_desc(addr, noffset, &desc);
-                       printf("Description:  ");
-                       if (ret)
-                               printf("unavailable\n");
-                       else
-                               printf("%s\n", desc);
-
-                       ret = fit_get_subtype(addr, noffset, &subtype);
-                       printf("Subtype:  ");
-                       if (ret) {
-                               printf("unavailable\n");
-                       } else {
-                               imgs[count].subtype = ait_subtype_nr(subtype);
-                               printf("%s %d\n", subtype,
-                                       imgs[count].subtype);
-                       }
-
-                       sprintf(imgs[count].desc, "%s", desc);
-
-                       ret = fit_image_get_data(addr, noffset,
-                               &imgs[count].data,
-                               &imgs[count].size);
-
-                       printf("Data Size:    ");
-                       if (ret)
-                               printf("unavailable\n");
-                       else
-                               genimg_print_size(imgs[count].size);
-                       printf("Data @ %p\n", imgs[count].data);
-                       count++;
-               }
-       }
-
-       for (i = 0; i < count; i++) {
-               if (imgs[i].subtype == FIT_SUBTYPE_UBOOT_IMAGE)
-                       found_uboot = i;
-               if (imgs[i].type == IH_TYPE_RAMDISK) {
-                       found_ramdisk = i;
-                       imgs[i].subtype = FIT_SUBTYPE_RAMDISK_IMAGE;
-               }
-       }
-
-       /* dvn_* env var update, if the FIT descriptors are different */
-       if (found_uboot >= 0) {
-               s = getenv("dvn_boot_vers");
-               if (s) {
-                       ret = strcmp(s, imgs[found_uboot].desc);
-                       if (ret != 0) {
-                               setenv("x_dvn_boot_vers",
-                                       imgs[found_uboot].desc);
-                       } else {
-                               found_uboot = -1;
-                               printf("no new uboot version\n");
-                       }
-               } else {
-                       setenv("dvn_boot_vers", imgs[found_uboot].desc);
-               }
-       }
-       if (found_ramdisk >= 0) {
-               s = getenv("dvn_app_vers");
-               if (s) {
-                       ret = strcmp(s, imgs[found_ramdisk].desc);
-                       if (ret != 0) {
-                               setenv("x_dvn_app_vers",
-                                       imgs[found_ramdisk].desc);
-                       } else {
-                               found_ramdisk = -1;
-                               printf("no new ramdisk version\n");
-                       }
-               } else {
-                       setenv("dvn_app_vers", imgs[found_ramdisk].desc);
-               }
-       }
-       if ((found_uboot == -1) && (found_ramdisk == -1))
-               return -EINVAL;
-
-       return 0;
-}
-
-static int ait_menu_evaluate_update(char *choice)
-{
-       int ret;
-
-       if (!choice)
-               return MENU_MAIN;
-
-       switch (choice[1]) {
-       case '1':
-               return ait_menu_show(&ait_network, 0);
-               break;
-       case '2':
-               /* load image */
-               ret = run_command("run load_img", 0);
-               printf("ret: %d\n", ret);
-               if (ret)
-                       return MENU_UPDATE;
-
-               ret = ait_menu_check_image();
-               if (ret)
-                       return MENU_UPDATE;
-
-               return ait_menu_show(&ait_load, 0);
-               break;
-       case '3':
-               return MENU_MAIN;
-               break;
-
-       }
-
-       return MENU_MAIN;
-}
-
-struct menu_display ait_update = {
-       .title = "AIT Update Software",
-       .timeout = 0,
-       .id = MENU_UPDATE,
-       .menulist = menu_update,
-       .menu_evaluate = ait_menu_evaluate_update,
-};
-
-static int ait_menu_evaluate_main(char *choice)
-{
-       if (!choice)
-               return MENU_STAY;
-
-       menu_start = 1;
-       switch (choice[1]) {
-       case '1':
-               /* run bootcmd */
-               return MENU_EXIT_BOOTCMD;
-               break;
-       case '2':
-               return ait_menu_show(&ait_update, 0);
-               break;
-       case '3':
-               /* reset to default settings */
-               setenv("app_reset", "yes");
-               return MENU_EXIT_BOOTCMD;
-               break;
-       case '4':
-               /* u-boot shell */
-               return MENU_EXIT;
-               break;
-       }
-
-       return MENU_EXIT;
-}
-
-struct menu_display ait_main = {
-       .title = "AIT Main",
-       .timeout = CONFIG_BOOTDELAY,
-       .id = MENU_MAIN,
-       .menulist = menu_main,
-       .menu_evaluate = ait_menu_evaluate_main,
-};
-
-int menu_show(int bootdelay)
-{
-       int ret;
-
-       run_command("run saveparms", 0);
-       ret = ait_menu_show(&ait_main, bootdelay);
-       run_command("run restoreparms", 0);
-
-       if (ret == MENU_EXIT_BOOTCMD)
-               return 0;
-
-       return MENU_EXIT;
-}
-
-void menu_display_statusline(struct menu *m)
-{
-       char *s1, *s2;
-
-       s1 = getenv("x_dvn_boot_vers");
-       if (!s1)
-               s1 = getenv("dvn_boot_vers");
-
-       s2 = getenv("x_dvn_app_vers");
-       if (!s2)
-               s2 = getenv("dvn_app_vers");
-
-       printf("State: dvn_boot_vers: %s dvn_app_vers: %s\n", s1, s2);
-       return;
-}
-#endif
diff --git a/board/ait/cam_enc_4xx/config.mk b/board/ait/cam_enc_4xx/config.mk
deleted file mode 100644 (file)
index 2022151..0000000
+++ /dev/null
@@ -1,20 +0,0 @@
-#
-#      AIT cam_enc_4xx board
-#      cam_enc_4xx board has 1 bank of 256 MB DDR RAM
-#      Physical Address: 8000'0000 to 9000'0000
-#
-# Linux Kernel is expected to be at 8000'8000, entry 8000'8000
-# (mem base + reserved)
-#
-
-UBL_CONFIG = $(srctree)/board/$(BOARDDIR)/ublimage.cfg
-ifndef CONFIG_SPL_BUILD
-ALL-y += u-boot.ubl
-else
-# as SPL_TEXT_BASE is not page-aligned, we need for some
-# linkers the -n flag (Do not page align data), to prevent
-# the following error message:
-# arm-linux-ld: u-boot-spl: Not enough room for program headers, try linking
-# with -N
-LDFLAGS_u-boot-spl += -n
-endif
diff --git a/board/ait/cam_enc_4xx/u-boot-spl.lds b/board/ait/cam_enc_4xx/u-boot-spl.lds
deleted file mode 100644 (file)
index f5c19df..0000000
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * (C) Copyright 2002
- * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
- *
- * (C) Copyright 2008
- * Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de>
- *
- * SPDX-License-Identifier:    GPL-2.0+
- */
-
-MEMORY { .sram : ORIGIN = CONFIG_SPL_TEXT_BASE,\
-               LENGTH = CONFIG_SPL_MAX_FOOTPRINT }
-
-OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
-OUTPUT_ARCH(arm)
-ENTRY(_start)
-SECTIONS
-{
-       . = CONFIG_SPL_TEXT_BASE;
-
-       . = ALIGN(4);
-       .text      :
-       {
-       __start = .;
-         *(.vectors)
-         arch/arm/cpu/arm926ejs/start.o        (.text*)
-         *(.text*)
-       } >.sram
-
-       . = ALIGN(4);
-       .rodata : { *(SORT_BY_ALIGNMENT(.rodata*)) } >.sram
-
-       . = ALIGN(4);
-       .data : { *(SORT_BY_ALIGNMENT(.data*)) } >.sram
-       . = ALIGN(4);
-       .rel.dyn : {
-               __rel_dyn_start = .;
-               *(.rel*)
-               __rel_dyn_end = .;
-       } >.sram
-
-       .bss :
-       {
-               . = ALIGN(4);
-               __bss_start = .;
-               *(.bss*)
-               . = ALIGN(4);
-               __bss_end = .;
-       } >.sram
-
-       __image_copy_end = .;
-
-       .end :
-       {
-               *(.__end)
-       }
-}
diff --git a/board/ait/cam_enc_4xx/ublimage.cfg b/board/ait/cam_enc_4xx/ublimage.cfg
deleted file mode 100644 (file)
index d4fe705..0000000
+++ /dev/null
@@ -1,31 +0,0 @@
-#
-# (C Copyright 2011
-# Heiko Schocher DENX Software Engineering hs@denx.de.
-#
-# SPDX-License-Identifier:     GPL-2.0+
-#
-# Refer doc/README.ublimage for more details about how-to configure
-# and create ublimage boot image
-#
-# The syntax is taken as close as possible with the kwbimage
-
-# UBL special mode : one of
-# safe (the board has no nand neither onenand)
-MODE   safe
-
-# Entry point address for the user bootloader (absolute address)
-# nand spl TEXT_BASE = 0x20 !!
-ENTRY  0x00000020
-
-# Number of pages (size of user bootloader in number of pages)
-# @ nand spl 6 pages
-PAGES  6
-
-# Block number where user bootloader is present
-START_BLOCK    0
-
-# Page number where user bootloader is present
-# Page 0 is always UBL header
-START_PAGE     0
-
-LD_ADDR                0x20
diff --git a/configs/cam_enc_4xx_defconfig b/configs/cam_enc_4xx_defconfig
deleted file mode 100644 (file)
index a67bf0e..0000000
+++ /dev/null
@@ -1,10 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_DAVINCI=y
-CONFIG_TARGET_CAM_ENC_4XX=y
-CONFIG_SPL=y
-# CONFIG_CMD_IMLS is not set
-# CONFIG_CMD_FLASH is not set
-# CONFIG_CMD_FPGA is not set
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_SPI_FLASH=y
-CONFIG_SYS_PROMPT="cam_enc_4xx> "
index f029a0f75752446de5842166e9cb4f980d66241e..fb1ed42320f377e7bf68206eb9f8104c1a8a22c8 100644 (file)
@@ -12,6 +12,7 @@ The list should be sorted in reverse chronological order.
 
 Board            Arch        CPU            Commit      Removed     Last known maintainer/contact
 =================================================================================================
+cam_enc_4xx      arm         arm926ejs      -           -           Heiko Schocher <hs@denx.de>
 atstk1003        avr32       -              e5354b8a    2015-06-10  Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
 atstk1004        avr32       -              e5354b8a    2015-06-10  Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
 atstk1006        avr32       -              e5354b8a    2015-06-10  Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
diff --git a/include/configs/cam_enc_4xx.h b/include/configs/cam_enc_4xx.h
deleted file mode 100644 (file)
index 578c4ab..0000000
+++ /dev/null
@@ -1,504 +0,0 @@
-/*
- * Copyright (C) 2009 Texas Instruments Incorporated
- *
- * Copyright (C) 2011
- * Heiko Schocher, DENX Software Engineering, hs@denx.de.
- *
- * SPDX-License-Identifier:    GPL-2.0+
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#define CONFIG_SYS_NO_FLASH            /* that is, no *NOR* flash */
-#define CONFIG_SYS_CONSOLE_INFO_QUIET
-
-/* SoC Configuration */
-#define CONFIG_SYS_TIMERBASE           0x01c21400      /* use timer 0 */
-#define CONFIG_SYS_HZ_CLOCK            24000000        /* timer0 freq */
-#define CONFIG_SOC_DM365
-
-#define CONFIG_MACH_TYPE       MACH_TYPE_DAVINCI_DM365_EVM
-
-#define CONFIG_HOSTNAME                        cam_enc_4xx
-
-#define        CONFIG_BOARD_LATE_INIT
-#define CONFIG_CAM_ENC_LED_MASK                0x0fc00000
-
-/* Memory Info */
-#define CONFIG_NR_DRAM_BANKS           1
-#define PHYS_SDRAM_1                   0x80000000
-#define PHYS_SDRAM_1_SIZE              (256 << 20)     /* 256 MiB */
-#define DDR_4BANKS                             /* 4-bank DDR2 (256MB) */
-#define CONFIG_MAX_RAM_BANK_SIZE       (256 << 20)     /* 256 MB */
-#define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM_1
-
-/* Serial Driver info: UART0 for console  */
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE    -4
-#define CONFIG_SYS_NS16550_COM1                0x01c20000
-#define CONFIG_SYS_NS16550_CLK         CONFIG_SYS_HZ_CLOCK
-#define CONFIG_CONS_INDEX              1
-#define CONFIG_BAUDRATE                        115200
-
-/* Network Configuration */
-#define CONFIG_DRIVER_TI_EMAC
-#define CONFIG_EMAC_MDIO_PHY_NUM       0
-#define        CONFIG_SYS_EMAC_TI_CLKDIV       0xa9    /* 1MHz */
-#define CONFIG_MII
-#define CONFIG_BOOTP_DNS
-#define CONFIG_BOOTP_DNS2
-#define CONFIG_BOOTP_SEND_HOSTNAME
-#define CONFIG_NET_RETRY_COUNT 10
-#define CONFIG_CMD_MII
-#define CONFIG_SYS_DCACHE_OFF
-#define CONFIG_RESET_PHY_R
-
-/* I2C */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_DAVINCI
-#define CONFIG_SYS_DAVINCI_I2C_SPEED           400000
-#define CONFIG_SYS_DAVINCI_I2C_SLAVE           0x10    /* SMBus host address */
-
-/* NAND: socketed, two chipselects, normally 2 GBytes */
-#define CONFIG_NAND_DAVINCI
-#define CONFIG_SYS_NAND_CS             2
-#define CONFIG_SYS_NAND_USE_FLASH_BBT
-#define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST
-#define CONFIG_SYS_NAND_PAGE_2K
-
-#define CONFIG_SYS_NAND_LARGEPAGE
-#define CONFIG_SYS_NAND_BASE_LIST      { 0x02000000, }
-/* socket has two chipselects, nCE0 gated by address BIT(14) */
-#define CONFIG_SYS_MAX_NAND_DEVICE     1
-
-/* SPI support */
-#define CONFIG_SPI
-#define CONFIG_SPI_FLASH_STMICRO
-#define CONFIG_DAVINCI_SPI
-#define CONFIG_SYS_SPI_BASE            DAVINCI_SPI1_BASE
-#define CONFIG_SYS_SPI_CLK             davinci_clk_get(SPI_PLLDIV)
-#define CONFIG_SF_DEFAULT_SPEED                3000000
-#define CONFIG_ENV_SPI_MAX_HZ          CONFIG_SF_DEFAULT_SPEED
-#define CONFIG_CMD_SF
-
-/* SD/MMC */
-#define CONFIG_MMC
-#define CONFIG_GENERIC_MMC
-#define CONFIG_DAVINCI_MMC
-#define CONFIG_MMC_MBLOCK
-
-/* U-Boot command configuration */
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_SAVES
-
-#ifdef CONFIG_CMD_BDI
-#define CONFIG_CLOCKS
-#endif
-
-#ifdef CONFIG_MMC
-#define CONFIG_DOS_PARTITION
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_MMC
-#endif
-
-#ifdef CONFIG_NAND_DAVINCI
-#define CONFIG_CMD_MTDPARTS
-#define CONFIG_MTD_PARTITIONS
-#define CONFIG_MTD_DEVICE
-#define CONFIG_CMD_NAND
-#define CONFIG_CMD_UBI
-#define CONFIG_CMD_UBIFS
-#define CONFIG_RBTREE
-#define CONFIG_LZO
-#endif
-
-#define CONFIG_CRC32_VERIFY
-#define CONFIG_MX_CYCLIC
-
-/* U-Boot general configuration */
-#define CONFIG_BOOTFILE                "uImage"        /* Boot file name */
-#define CONFIG_SYS_CBSIZE      1024            /* Console I/O Buffer Size  */
-#define CONFIG_SYS_PBSIZE                      /* Print buffer size */ \
-               (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS     16              /* max number of command args */
-#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_LONGHELP
-
-#define CONFIG_MENU
-#define CONFIG_MENU_SHOW
-#define CONFIG_FIT
-#define CONFIG_BOARD_IMG_ADDR_R 0x80000000
-
-#ifdef CONFIG_NAND_DAVINCI
-#define CONFIG_ENV_SIZE                        (16 << 10)
-#define CONFIG_ENV_IS_IN_NAND
-#define CONFIG_ENV_OFFSET              0x180000
-#define CONFIG_ENV_RANGE               0x040000
-#define CONFIG_ENV_OFFSET_REDUND       0x1c0000
-#undef CONFIG_ENV_IS_IN_FLASH
-#endif
-
-#if defined(CONFIG_MMC) && !defined(CONFIG_ENV_IS_IN_NAND)
-#define CONFIG_CMD_ENV
-#define CONFIG_SYS_MMC_ENV_DEV 0
-#define CONFIG_ENV_SIZE                (16 << 10)      /* 16 KiB */
-#define CONFIG_ENV_OFFSET      (51 << 9)       /* Sector 51 */
-#define CONFIG_ENV_IS_IN_MMC
-#undef CONFIG_ENV_IS_IN_FLASH
-#endif
-
-#define CONFIG_BOOTDELAY       3
-/*
- * 24MHz InputClock / 15 prediv -> 1.6 MHz timer running
- * Timeout 1 second.
- */
-#define CONFIG_AIT_TIMER_TIMEOUT       0x186a00
-
-#define CONFIG_CMDLINE_EDITING
-#define CONFIG_VERSION_VARIABLE
-#define CONFIG_TIMESTAMP
-
-/* U-Boot memory configuration */
-#define CONFIG_SYS_MALLOC_LEN          (1 << 20)       /* 1 MiB */
-#define CONFIG_SYS_MEMTEST_START       0x80000000      /* physical address */
-#define CONFIG_SYS_MEMTEST_END         0x81000000      /* test 16MB RAM */
-
-/* Linux interfacing */
-#define CONFIG_CMDLINE_TAG
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_SYS_BARGSIZE    1024                    /* bootarg Size */
-#define CONFIG_SYS_LOAD_ADDR   0x80700000              /* kernel address */
-
-#define MTDIDS_DEFAULT         "nand0=davinci_nand.0"
-#define MTDPARTS_DEFAULT                       \
-       "mtdparts="                             \
-               "davinci_nand.0:"               \
-                       "128k(spl),"            \
-                       "384k(UBLheader),"      \
-                       "1m(u-boot),"           \
-                       "512k(env),"            \
-                       "-(ubi)"
-
-#define CONFIG_SYS_NAND_PAGE_SIZE      0x800
-#define CONFIG_SYS_NAND_BLOCK_SIZE     0x20000
-
-/* Defines for SPL */
-#define CONFIG_SPL_FRAMEWORK
-#define CONFIG_SPL_BOARD_INIT
-#define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_NAND_SUPPORT
-#define CONFIG_SPL_NAND_BASE
-#define CONFIG_SPL_NAND_DRIVERS
-#define CONFIG_SPL_NAND_ECC
-#define CONFIG_SPL_NAND_SIMPLE
-#define CONFIG_SYS_NAND_HW_ECC_OOBFIRST
-#define CONFIG_SPL_SERIAL_SUPPORT
-#define CONFIG_SPL_POST_MEM_SUPPORT
-#define CONFIG_SPL_LDSCRIPT            "$(BOARDDIR)/u-boot-spl.lds"
-#define CONFIG_SPL_STACK               (0x00010000 + 0x7f00)
-
-#define CONFIG_SPL_TEXT_BASE           0x00000020 /*CONFIG_SYS_SRAM_START*/
-/* Provide at least 16MB spacing between us and the Linux Kernel image */
-#define CONFIG_SPL_PAD_TO              12320
-#define CONFIG_SPL_MAX_FOOTPRINT       12288
-
-#ifndef CONFIG_SPL_BUILD
-#define CONFIG_SYS_TEXT_BASE           0x81080000
-#endif
-
-#define CONFIG_SYS_NAND_BASE           0x02000000
-#define CONFIG_SYS_NAND_PAGE_COUNT     (CONFIG_SYS_NAND_BLOCK_SIZE / \
-                                       CONFIG_SYS_NAND_PAGE_SIZE)
-
-#define CONFIG_SYS_NAND_ECCPOS         {                               \
-                               24, 25, 26, 27, 28,                     \
-                               29, 30, 31, 32, 33, 34, 35, 36, 37, 38, \
-                               39, 40, 41, 42, 43, 44, 45, 46, 47, 48, \
-                               49, 50, 51, 52, 53, 54, 55, 56, 57, 58, \
-                               59, 60, 61, 62, 63 }
-#define CONFIG_SYS_NAND_BAD_BLOCK_POS  0
-#define CONFIG_SYS_NAND_ECCSIZE                0x200
-#define CONFIG_SYS_NAND_ECCBYTES       10
-#define CONFIG_SYS_NAND_MAX_OOBFREE    2
-#define CONFIG_SYS_NAND_MAX_ECCPOS     56
-#define CONFIG_SYS_NAND_OOBSIZE                64
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
-
-/*
- * RBL searches from Block n (n = 1..24)
- * so we can define, how many UBL Headers
- * we can write before the real spl code
- */
-#define CONFIG_SYS_NROF_PAGES_NAND_SPL 6
-
-#define CONFIG_SYS_NAND_U_BOOT_DST     0x81080000 /* u-boot TEXT_BASE */
-#define CONFIG_SYS_NAND_U_BOOT_START   CONFIG_SYS_NAND_U_BOOT_DST
-
-/*
- * Post tests for memory testing
- */
-#define CONFIG_POST    CONFIG_SYS_POST_MEMORY
-#define _POST_WORD_ADDR        0x0
-
-#define CONFIG_DISPLAY_BOARDINFO
-
-#define CONFIG_SYS_INIT_SP_ADDR                CONFIG_SPL_STACK
-
-#define CONFIG_SYS_NAND_U_BOOT_OFFS    0x80000
-#define CONFIG_SYS_NAND_U_BOOT_SIZE    0xa0000
-#define CONFIG_SYS_NAND_U_BOOT_ERA_SIZE        0x100000
-
-/* for UBL header */
-#define CONFIG_SYS_UBL_BLOCK           (CONFIG_SYS_NAND_PAGE_SIZE)
-
-#define CONFIG_SYS_DM36x_PLL1_PLLM     0x55
-#define CONFIG_SYS_DM36x_PLL1_PREDIV   0x8005
-#define CONFIG_SYS_DM36x_PLL2_PLLM     0x09
-#define CONFIG_SYS_DM36x_PLL2_PREDIV   0x8000
-#define CONFIG_SYS_DM36x_PERI_CLK_CTRL 0x243F04FC
-#define CONFIG_SYS_DM36x_PLL1_PLLDIV1  0x801b
-#define CONFIG_SYS_DM36x_PLL1_PLLDIV2  0x8001
-/* POST DIV 680/2 = 340Mhz  -> MJCP and HDVICP bus interface clock */
-#define CONFIG_SYS_DM36x_PLL1_PLLDIV3  0x8001
-/*
- * POST DIV 680/4 = 170Mhz  -> EDMA/Peripheral CFG0(1/2 MJCP/HDVICP bus
- * interface clk)
- */
-#define CONFIG_SYS_DM36x_PLL1_PLLDIV4  0x8003
-/* POST DIV 680/2 = 340Mhz  -> VPSS */
-#define CONFIG_SYS_DM36x_PLL1_PLLDIV5  0x8001
-/* POST DIV 680/9 = 75.6 Mhz -> VENC */
-#define CONFIG_SYS_DM36x_PLL1_PLLDIV6  0x8008
-/*
- * POST DIV 680/1 = 680Mhz -> DDRx2(with internal divider of 2, clock boils
- * down to 340 Mhz)
- */
-#define CONFIG_SYS_DM36x_PLL1_PLLDIV7  0x8000
-/* POST DIV 680/7= 97Mhz-> MMC0/SD0 */
-#define CONFIG_SYS_DM36x_PLL1_PLLDIV8  0x8006
-/* POST DIV 680/28 = 24.3Mhz-> CLKOUT */
-#define CONFIG_SYS_DM36x_PLL1_PLLDIV9  0x801b
-
-#define CONFIG_SYS_DM36x_PLL2_PLLDIV1  0x8011
-/* POST DIV 432/1=432 Mhz  -> ARM926/(HDVICP block) clk */
-#define CONFIG_SYS_DM36x_PLL2_PLLDIV2  0x8000
-#define CONFIG_SYS_DM36x_PLL2_PLLDIV3  0x8001
-/* POST DIV 432/21= 20.5714 Mhz->VOICE Codec clk */
-#define CONFIG_SYS_DM36x_PLL2_PLLDIV4  0x8014
-/* POST DIV 432/16=27 Mhz  -> VENC(For SD modes, requires) */
-#define CONFIG_SYS_DM36x_PLL2_PLLDIV5  0x800f
-
-/*
- * READ LATENCY 7 (CL + 2)
- * CONFIG_PWRDNEN = 1
- * CONFIG_EXT_STRBEN = 1
- */
-#define CONFIG_SYS_DM36x_DDR2_DDRPHYCR (0 \
-       | DV_DDR_PHY_EXT_STRBEN \
-       | DV_DDR_PHY_PWRDNEN \
-       | (7 << DV_DDR_PHY_RD_LATENCY_SHIFT))
-
-/*
- * T_RFC = (trfc/DDR_CLK) - 1 = (195 / 2.941) - 1
- * T_RP  = (trp/DDR_CLK) - 1  = (12.5 / 2.941) - 1
- * T_RCD = (trcd/DDR_CLK) - 1 = (12.5 / 2.941) - 1
- * T_WR  = (twr/DDR_CLK) - 1  = (15 / 2.941) - 1
- * T_RAS = (tras/DDR_CLK) - 1 = (45 / 2.941) - 1
- * T_RC  = (trc/DDR_CLK) - 1  = (57.5 / 2.941) - 1
- * T_RRD = (trrd/DDR_CLK) - 1 = (7.5 / 2.941) - 1
- * T_WTR = (twtr/DDR_CLK) - 1 = (7.5 / 2.941) - 1
- */
-#define CONFIG_SYS_DM36x_DDR2_SDTIMR   (0 \
-       | (66 << DV_DDR_SDTMR1_RFC_SHIFT) \
-       | (4  << DV_DDR_SDTMR1_RP_SHIFT) \
-       | (4  << DV_DDR_SDTMR1_RCD_SHIFT) \
-       | (5  << DV_DDR_SDTMR1_WR_SHIFT) \
-       | (14 << DV_DDR_SDTMR1_RAS_SHIFT) \
-       | (19 << DV_DDR_SDTMR1_RC_SHIFT) \
-       | (2  << DV_DDR_SDTMR1_RRD_SHIFT) \
-       | (2  << DV_DDR_SDTMR1_WTR_SHIFT))
-
-/*
- * T_RASMAX = (trasmax/refresh_rate) - 1 = (70K / 7812.6) - 1
- * T_XP  = tCKE - 1 = 3 - 2
- * T_XSNR= ((trfc + 10)/DDR_CLK) - 1 = (205 / 2.941) - 1
- * T_XSRD = txsrd - 1 = 200 - 1
- * T_RTP = (trtp/DDR_CLK) - 1 = (7.5 / 2.941) - 1
- * T_CKE = tcke - 1     = 3 - 1
- */
-#define CONFIG_SYS_DM36x_DDR2_SDTIMR2  (0 \
-       | (8  << DV_DDR_SDTMR2_RASMAX_SHIFT) \
-       | (2  << DV_DDR_SDTMR2_XP_SHIFT) \
-       | (69 << DV_DDR_SDTMR2_XSNR_SHIFT) \
-       | (199 <<  DV_DDR_SDTMR2_XSRD_SHIFT) \
-       | (2 <<  DV_DDR_SDTMR2_RTP_SHIFT) \
-       | (2 <<  DV_DDR_SDTMR2_CKE_SHIFT))
-
-/* PR_OLD_COUNT = 0xfe */
-#define CONFIG_SYS_DM36x_DDR2_PBBPR    0x000000FE
-/* refresh rate = 0x768 */
-#define CONFIG_SYS_DM36x_DDR2_SDRCR    0x00000768
-
-#define CONFIG_SYS_DM36x_DDR2_SDBCR    (0 \
-       | (2 << DV_DDR_SDCR_PAGESIZE_SHIFT) \
-       | (3 << DV_DDR_SDCR_IBANK_SHIFT) \
-       | (5 << DV_DDR_SDCR_CL_SHIFT) \
-       | (1 << DV_DDR_SDCR_BUS_WIDTH_SHIFT)    \
-       | (1 << DV_DDR_SDCR_TIMUNLOCK_SHIFT) \
-       | (1 << DV_DDR_SDCR_DDREN_SHIFT) \
-       | (0 << DV_DDR_SDCR_DDRDRIVE0_SHIFT)    \
-       | (1 << DV_DDR_SDCR_DDR2EN_SHIFT) \
-       | (1 << DV_DDR_SDCR_DDR_DDQS_SHIFT) \
-       | (1 << DV_DDR_SDCR_BOOTUNLOCK_SHIFT))
-
-#define CONFIG_SYS_DM36x_AWCCR 0xff
-#define CONFIG_SYS_DM36x_AB1CR 0x40400204
-#define CONFIG_SYS_DM36x_AB2CR 0x04ca2650
-
-/* All Video Inputs */
-#define CONFIG_SYS_DM36x_PINMUX0       0x00000000
-/*
- * All Video Outputs,
- * GPIO 86, 87 + 90 0x0000f030
- */
-#define CONFIG_SYS_DM36x_PINMUX1       0x00530002
-#define CONFIG_SYS_DM36x_PINMUX2       0x00001815
-/*
- * SPI1, UART1, I2C, SD0, SD1, McBSP0, CLKOUTs
- * GPIO 25 0x60000000
- */
-#define CONFIG_SYS_DM36x_PINMUX3       0x9b5affff
-/*
- * MMC/SD0 instead of MS, SPI0
- * GPIO 34 0x0000c000
- */
-#define CONFIG_SYS_DM36x_PINMUX4       0x00002655
-
-/*
- * Default environment settings
- */
-
-#define DVN4XX_UBOOT_ADDR_R_RAM                0x80000000
-/* (DVN4XX_UBOOT_ADDR_R_RAM + CONFIG_SYS_NAND_PAGE_SIZE) */
-#define DVN4XX_UBOOT_ADDR_R_NAND_SPL   0x80000800
-/*
- * (DVN4XX_UBOOT_ADDR_R_NAND_SPL + (CONFIG_SYS_NROF_PAGES_NAND_SPL * \
- * CONFIG_SYS_NAND_PAGE_SIZE))
- */
-#define DVN4XX_UBOOT_ADDR_R_UBOOT      0x80003800
-
-#define        CONFIG_EXTRA_ENV_SETTINGS                                       \
-       "u_boot_addr_r=" __stringify(DVN4XX_UBOOT_ADDR_R_RAM) "\0"      \
-       "u-boot=" __stringify(CONFIG_HOSTNAME) "/u-boot.ubl\0"          \
-       "load=tftp ${u_boot_addr_r} ${u-boot}\0"                        \
-       "pagesz=" __stringify(CONFIG_SYS_NAND_PAGE_SIZE) "\0"           \
-       "writeheader=nandrbl rbl;nand erase 20000 ${pagesz};"           \
-               "nand write ${u_boot_addr_r} 20000 ${pagesz};"          \
-               "nandrbl uboot\0"                                       \
-       "writenand_spl=nandrbl rbl;nand erase 0 3000;"                  \
-               "nand write " __stringify(DVN4XX_UBOOT_ADDR_R_NAND_SPL) \
-               " 0 3000;nandrbl uboot\0"                               \
-       "writeuboot=nandrbl uboot;"                                     \
-               "nand erase " __stringify(CONFIG_SYS_NAND_U_BOOT_OFFS) " "\
-                __stringify(CONFIG_SYS_NAND_U_BOOT_ERA_SIZE)           \
-               ";nand write " __stringify(DVN4XX_UBOOT_ADDR_R_UBOOT)   \
-               " " __stringify(CONFIG_SYS_NAND_U_BOOT_OFFS) " "        \
-               __stringify(CONFIG_SYS_NAND_U_BOOT_SIZE) "\0"           \
-       "update=run load writenand_spl writeuboot\0"                    \
-       "bootcmd=run net_nfs\0"                                         \
-       "rootpath=/opt/eldk-arm/arm\0"                                  \
-       "mtdids=" MTDIDS_DEFAULT "\0"                                   \
-       "mtdparts=" MTDPARTS_DEFAULT "\0"                               \
-       "netdev=eth0\0"                                                 \
-       "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0"              \
-       "addmisc=setenv bootargs ${bootargs} app_reset=${app_reset}\0"  \
-       "addcon=setenv bootargs ${bootargs} console=ttyS0,"             \
-               "${baudrate}n8\0"                                       \
-       "addip=setenv bootargs ${bootargs} "                            \
-               "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"      \
-               ":${hostname}:${netdev}:off eth=${ethaddr} panic=1\0"   \
-       "rootpath=/opt/eldk-arm/arm\0"                                  \
-       "nfsargs=setenv bootargs root=/dev/nfs rw "                     \
-               "nfsroot=${serverip}:${rootpath}\0"                     \
-       "bootfile=" __stringify(CONFIG_HOSTNAME) "/uImage \0"           \
-       "kernel_addr_r=80600000\0"                                      \
-       "load_kernel=tftp ${kernel_addr_r} ${bootfile}\0"               \
-       "ubi_load_kernel=ubi part ubi 2048;ubifsmount ubi:${img_volume};" \
-               "ubifsload ${kernel_addr_r} boot/uImage\0"              \
-       "fit_addr_r=" __stringify(CONFIG_BOARD_IMG_ADDR_R) "\0"         \
-       "img_addr_r=" __stringify(CONFIG_BOARD_IMG_ADDR_R) "\0"         \
-       "img_file=" __stringify(CONFIG_HOSTNAME) "/ait.itb\0"           \
-       "header_addr=20000\0"                                           \
-       "img_writeheader=nandrbl rbl;"                                  \
-               "nand erase ${header_addr} ${pagesz};"                  \
-               "nand write ${img_addr_r} ${header_addr} ${pagesz};"    \
-               "nandrbl uboot\0"                                       \
-       "img_writespl=nandrbl rbl;nand erase 0 3000;"                   \
-               "nand write ${img_addr_r} 0 3000;nandrbl uboot\0"       \
-       "img_writeuboot=nandrbl uboot;"                                 \
-               "nand erase " __stringify(CONFIG_SYS_NAND_U_BOOT_OFFS) " "\
-                __stringify(CONFIG_SYS_NAND_U_BOOT_ERA_SIZE)           \
-               ";nand write ${img_addr_r} "                            \
-               __stringify(CONFIG_SYS_NAND_U_BOOT_OFFS) " "            \
-               __stringify(CONFIG_SYS_NAND_U_BOOT_SIZE) "\0"           \
-       "img_writedfenv=ubi part ubi 2048;"                             \
-               "ubi write ${img_addr_r} default ${filesize}\0"         \
-       "img_volume=rootfs1\0"                                          \
-       "img_writeramdisk=ubi part ubi 2048;"                           \
-               "ubi write ${img_addr_r} ${img_volume} ${filesize}\0"   \
-       "load_img=tftp ${fit_addr_r} ${img_file}\0"                     \
-       "net_nfs=run load_kernel; "                                     \
-               "run nfsargs addip addcon addmtd addmisc;"              \
-               "bootm ${kernel_addr_r}\0"                              \
-       "ubi_ubi=run ubi_load_kernel; "                                 \
-               "run ubiargs addip addcon addmtd addmisc;"              \
-               "bootm ${kernel_addr_r}\0"                              \
-       "ubiargs=setenv bootargs ubi.mtd=4,2048"                        \
-               " root=ubi0:${img_volume} rw rootfstype=ubifs\0"        \
-       "app_reset=no\0"                                                \
-       "dvn_app_vers=void\0"                                           \
-       "dvn_boot_vers=void\0"                                          \
-       "savenewvers=run savetmpparms restoreparms; saveenv;"           \
-               "run restoretmpparms\0"                                 \
-       "savetmpparms=setenv y_ipaddr ${ipaddr};"                       \
-               "setenv y_netmask ${netmask};"                          \
-               "setenv y_serverip ${serverip};"                        \
-               "setenv y_gatewayip ${gatewayip}\0"                     \
-       "saveparms=setenv x_ipaddr ${ipaddr};"                          \
-               "setenv x_netmask ${netmask};"                          \
-               "setenv x_serverip ${serverip};"                        \
-               "setenv x_gatewayip ${gatewayip}\0"                     \
-       "restoreparms=setenv ipaddr ${x_ipaddr};"                       \
-               "setenv netmask ${x_netmask};"                          \
-               "setenv serverip ${x_serverip};"                        \
-               "setenv gatewayip ${x_gatewayip}\0"                     \
-       "restoretmpparms=setenv ipaddr ${y_ipaddr};"                    \
-               "setenv netmask ${y_netmask};"                          \
-               "setenv serverip ${y_serverip};"                        \
-               "setenv gatewayip ${y_gatewayip}\0"                     \
-       "\0"
-
-/* USB Configuration */
-#define CONFIG_USB_DAVINCI
-#define CONFIG_USB_MUSB_HCD
-#define CONFIG_DV_USBPHY_CTL (USBPHY_SESNDEN | USBPHY_VBDTCTEN | \
-                               USBPHY_PHY24MHZ)
-
-#define CONFIG_CMD_USB         /* include support for usb cmd */
-#define CONFIG_USB_STORAGE     /* MSC class support */
-#define CONFIG_CMD_STORAGE     /* inclue support for usb-storage cmd */
-#define CONFIG_CMD_FAT         /* inclue support for FAT/storage */
-#define CONFIG_DOS_PARTITION   /* inclue support for FAT/storage */
-
-#undef DAVINCI_DM365EVM
-#define PINMUX4_USBDRVBUS_BITCLEAR       0x3000
-#define PINMUX4_USBDRVBUS_BITSET         0x2000
-
-#endif /* __CONFIG_H */