LIBS += drivers/rtc/librtc.o
LIBS += drivers/serial/libserial.o
LIBS += drivers/twserial/libtws.o
+LIBS += drivers/usb/eth/libusb_eth.a
LIBS += drivers/usb/gadget/libusb_gadget.o
LIBS += drivers/usb/host/libusb_host.o
LIBS += drivers/usb/musb/libusb_musb.o
#ifdef CONFIG_USB_STORAGE
static int usb_stor_curr_dev = -1; /* current device */
#endif
+#ifdef CONFIG_USB_HOST_ETHER
+static int usb_ether_curr_dev = -1; /* current ethernet device */
+#endif
/* some display routines (info command) */
char *usb_get_class_desc(unsigned char dclass)
usb_stop();
printf("(Re)start USB...\n");
i = usb_init();
+ if (i >= 0) {
#ifdef CONFIG_USB_STORAGE
- /* try to recognize storage devices immediately */
- if (i >= 0)
+ /* try to recognize storage devices immediately */
usb_stor_curr_dev = usb_stor_scan(1);
#endif
+#ifdef CONFIG_USB_HOST_ETHER
+ /* try to recognize ethernet devices immediately */
+ usb_ether_curr_dev = usb_host_eth_scan(1);
+#endif
+ }
return 0;
}
if (strncmp(argv[1], "stop", 4) == 0) {
/*
* disables the asynch behaviour of the control message. This is used for data
* transfers that uses the exclusiv access to the control and bulk messages.
+ * Returns the old value so it can be restored later.
*/
-void usb_disable_asynch(int disable)
+int usb_disable_asynch(int disable)
{
+ int old_value = asynch_allowed;
+
asynch_allowed = !disable;
+ return old_value;
}
The USB support is implemented on the base of the UHCI Host
controller.
-Currently supported are USB Hubs, USB Keyboards and USB Floppys.
+Currently supported are USB Hubs, USB Keyboards, USB Floppys, USB
+flash sticks and USB network adaptors.
Tested with a TEAC Floppy TEAC FD-05PUB and Chicony KU-8933 Keyboard.
How it works:
if using CONFIG_CMD_USB
CONFIG_USB_KEYBOARD enables the USB Keyboard
CONFIG_USB_STORAGE enables the USB storage devices
+CONFIG_USB_HOST_ETHER enables USB ethernet dongle support
--- /dev/null
+#
+# Copyright (c) 2011 The Chromium OS Authors.
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB := $(obj)libusb_eth.a
+
+# new USB host ethernet layer dependencies
+COBJS-$(CONFIG_USB_HOST_ETHER) += usb_ether.o
+
+COBJS := $(COBJS-y)
+SRCS := $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+
+all: $(LIB)
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
--- /dev/null
+/*
+ * Copyright (c) 2011 The Chromium OS Authors.
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <usb.h>
+
+#include "usb_ether.h"
+
+typedef void (*usb_eth_before_probe)(void);
+typedef int (*usb_eth_probe)(struct usb_device *dev, unsigned int ifnum,
+ struct ueth_data *ss);
+typedef int (*usb_eth_get_info)(struct usb_device *dev, struct ueth_data *ss,
+ struct eth_device *dev_desc);
+
+struct usb_eth_prob_dev {
+ usb_eth_before_probe before_probe; /* optional */
+ usb_eth_probe probe;
+ usb_eth_get_info get_info;
+};
+
+/* driver functions go here, each bracketed by #ifdef CONFIG_USB_ETHER_xxx */
+static const struct usb_eth_prob_dev prob_dev[] = {
+ { }, /* END */
+};
+
+static int usb_max_eth_dev; /* number of highest available usb eth device */
+static struct ueth_data usb_eth[USB_MAX_ETH_DEV];
+
+/*******************************************************************************
+ * tell if current ethernet device is a usb dongle
+ */
+int is_eth_dev_on_usb_host(void)
+{
+ int i;
+ struct eth_device *dev = eth_get_dev();
+
+ if (dev) {
+ for (i = 0; i < usb_max_eth_dev; i++)
+ if (&usb_eth[i].eth_dev == dev)
+ return 1;
+ }
+ return 0;
+}
+
+/*
+ * Given a USB device, ask each driver if it can support it, and attach it
+ * to the first driver that says 'yes'
+ */
+static void probe_valid_drivers(struct usb_device *dev)
+{
+ int j;
+
+ for (j = 0; prob_dev[j].probe && prob_dev[j].get_info; j++) {
+ if (!prob_dev[j].probe(dev, 0, &usb_eth[usb_max_eth_dev]))
+ continue;
+ /*
+ * ok, it is a supported eth device. Get info and fill it in
+ */
+ if (prob_dev[j].get_info(dev,
+ &usb_eth[usb_max_eth_dev],
+ &usb_eth[usb_max_eth_dev].eth_dev)) {
+ /* found proper driver */
+ /* register with networking stack */
+ usb_max_eth_dev++;
+
+ /*
+ * usb_max_eth_dev must be incremented prior to this
+ * call since eth_current_changed (internally called)
+ * relies on it
+ */
+ eth_register(&usb_eth[usb_max_eth_dev - 1].eth_dev);
+ break;
+ }
+ }
+ }
+
+/*******************************************************************************
+ * scan the usb and reports device info
+ * to the user if mode = 1
+ * returns current device or -1 if no
+ */
+int usb_host_eth_scan(int mode)
+{
+ int i, old_async;
+ struct usb_device *dev;
+
+
+ if (mode == 1)
+ printf(" scanning bus for ethernet devices... ");
+
+ old_async = usb_disable_asynch(1); /* asynch transfer not allowed */
+
+ for (i = 0; i < USB_MAX_ETH_DEV; i++)
+ memset(&usb_eth[i], 0, sizeof(usb_eth[i]));
+
+ for (i = 0; prob_dev[i].probe; i++) {
+ if (prob_dev[i].before_probe)
+ prob_dev[i].before_probe();
+ }
+
+ usb_max_eth_dev = 0;
+ for (i = 0; i < USB_MAX_DEVICE; i++) {
+ dev = usb_get_dev_index(i); /* get device */
+ debug("i=%d\n", i);
+ if (dev == NULL)
+ break; /* no more devices avaiable */
+
+ /* find valid usb_ether driver for this device, if any */
+ probe_valid_drivers(dev);
+
+ /* check limit */
+ if (usb_max_eth_dev == USB_MAX_ETH_DEV) {
+ printf("max USB Ethernet Device reached: %d stopping\n",
+ usb_max_eth_dev);
+ break;
+ }
+ } /* for */
+
+ usb_disable_asynch(old_async); /* restore asynch value */
+ printf("%d Ethernet Device(s) found\n", usb_max_eth_dev);
+ if (usb_max_eth_dev > 0)
+ return 0;
+ return -1;
+}
+
#endif
+#ifdef CONFIG_USB_HOST_ETHER
+
+#define USB_MAX_ETH_DEV 5
+int usb_host_eth_scan(int mode);
+
+#endif
+
#ifdef CONFIG_USB_KEYBOARD
int drv_usb_kbd_init(void);
void *data, int len, int *actual_length, int timeout);
int usb_submit_int_msg(struct usb_device *dev, unsigned long pipe,
void *buffer, int transfer_len, int interval);
-void usb_disable_asynch(int disable);
+int usb_disable_asynch(int disable);
int usb_maxpacket(struct usb_device *dev, unsigned long pipe);
inline void wait_ms(unsigned long ms);
int usb_get_configuration_no(struct usb_device *dev, unsigned char *buffer,
--- /dev/null
+/*
+ * Copyright (c) 2011 The Chromium OS Authors.
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __USB_ETHER_H__
+#define __USB_ETHER_H__
+
+#include <net.h>
+
+/*
+ * IEEE 802.3 Ethernet magic constants. The frame sizes omit the preamble
+ * and FCS/CRC (frame check sequence).
+ */
+#define ETH_ALEN 6 /* Octets in one ethernet addr */
+#define ETH_HLEN 14 /* Total octets in header. */
+#define ETH_ZLEN 60 /* Min. octets in frame sans FCS */
+#define ETH_DATA_LEN 1500 /* Max. octets in payload */
+#define ETH_FRAME_LEN PKTSIZE_ALIGN /* Max. octets in frame sans FCS */
+#define ETH_FCS_LEN 4 /* Octets in the FCS */
+
+struct ueth_data {
+ /* eth info */
+ struct eth_device eth_dev; /* used with eth_register */
+ int phy_id; /* mii phy id */
+
+ /* usb info */
+ struct usb_device *pusb_dev; /* this usb_device */
+ unsigned char ifnum; /* interface number */
+ unsigned char ep_in; /* in endpoint */
+ unsigned char ep_out; /* out ....... */
+ unsigned char ep_int; /* interrupt . */
+ unsigned char subclass; /* as in overview */
+ unsigned char protocol; /* .............. */
+ unsigned char irqinterval; /* Intervall for IRQ Pipe */
+
+ /* private fields for each driver can go here if needed */
+};
+
+/*
+ * Function definitions for each USB ethernet driver go here, bracketed by
+ * #ifdef CONFIG_USB_ETHER_xxx...#endif
+ */
+
+#endif /* __USB_ETHER_H__ */
return (0);
}
-int eth_register(struct eth_device* dev)
+static void eth_current_changed(void)
{
- struct eth_device *d;
-
- if (!eth_devices) {
- eth_current = eth_devices = dev;
#ifdef CONFIG_NET_MULTI
+ {
+ char *act = getenv("ethact");
/* update current ethernet name */
+ if (eth_current)
{
- char *act = getenv("ethact");
if (act == NULL || strcmp(act, eth_current->name) != 0)
setenv("ethact", eth_current->name);
}
+ /*
+ * remove the variable completely if there is no active
+ * interface
+ */
+ else if (act != NULL)
+ setenv("ethact", NULL);
+ }
#endif
+}
+
+int eth_register(struct eth_device *dev)
+{
+ struct eth_device *d;
+ if (!eth_devices) {
+ eth_current = eth_devices = dev;
+ eth_current_changed();
} else {
for (d=eth_devices; d->next!=eth_devices; d=d->next)
;
dev = dev->next;
} while(dev != eth_devices);
- /* update current ethernet name */
- if (eth_current) {
- char *act = getenv("ethact");
- if (act == NULL || strcmp(act, eth_current->name) != 0)
- setenv("ethact", eth_current->name);
- } else
- setenv("ethact", NULL);
-
+ eth_current_changed();
putc ('\n');
}
eth_current = eth_current->next;
- /* update current ethernet name */
- act = getenv("ethact");
- if (act == NULL || strcmp(act, eth_current->name) != 0)
- setenv("ethact", eth_current->name);
+ eth_current_changed();
if (first_failed == eth_current) {
NetRestartWrap = 1;
} while (old_current != eth_current);
}
- setenv("ethact", eth_current->name);
+ eth_current_changed();
}
char *eth_get_name (void)
projects / u-boot.git / commitdiff