}
@./mkconfig -a IceCube ppc mpc5xxx icecube
-inka4x0_config: unconfig
+inka4x0_config: unconfig
@./mkconfig inka4x0 ppc mpc5xxx inka4x0
+mcc200_config: unconfig
+ @./mkconfig mcc200 ppc mpc5xxx mcc200
+
o2dnt_config:
- @./mkconfig -a o2dnt ppc mpc5xxx o2dnt
+ @./mkconfig o2dnt ppc mpc5xxx o2dnt
pf5200_config: unconfig
- @./mkconfig -a pf5200 ppc mpc5xxx pf5200 esd
+ @./mkconfig pf5200 ppc mpc5xxx pf5200 esd
PM520_config \
PM520_DDR_config \
--- /dev/null
+#
+# (C) Copyright 2003-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = lib$(BOARD).a
+
+OBJS := $(BOARD).o flash.o
+
+$(LIB): $(OBJS) $(SOBJS)
+ $(AR) crv $@ $(OBJS)
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+ $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+-include .depend
+
+#########################################################################
--- /dev/null
+#
+# (C) Copyright 2003-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# MCC200 board
+#
+
+TEXT_BASE = 0xfff00000
+# TEXT_BASE = 0x00100000
+
+PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)/board
--- /dev/null
+/*
+ * (C) Copyright 2001
+ * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
+ *
+ * (C) Copyright 2001-2006
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <linux/byteorder/swab.h>
+#include <flash.h>
+
+//###CHD: gehört wieder raus ist vom PXA271 file!
+#define FLASH_28F256L18T 0x00B0 /* Intel 28F256L18T ( 32M = 128K x 255 + 32k x 4) */
+#define FLASH_28F256L18B 0x00B1 /* Intel 28F256L18B ( 32M = 32k x 4 + 128K x 255) */
+#define FLASH_28F256P30B 0x001C /* Intel 28F256P30B ( 32M = 32k x 4 + 128K x 255) */
+#define FLASH_28F256P30T 0x0019 /* Intel 28F256P30T ( 128K x 255 + 32M = 32k x 4 + */
+
+#define INTEL_ID_28F016S 0x66a066a0 /* 28F016S[VS] ID (16M = 512k x 16) */
+#define INTEL_ID_28F800B3T 0x88928892 /* 8M = 512K x 16 top boot sector */
+#define INTEL_ID_28F800B3B 0x88938893 /* 8M = 512K x 16 bottom boot sector */
+#define INTEL_ID_28F160B3T 0x88908890 /* 16M = 1M x 16 top boot sector */
+#define INTEL_ID_28F160B3B 0x88918891 /* 16M = 1M x 16 bottom boot sector */
+#define INTEL_ID_28F320B3T 0x88968896 /* 32M = 2M x 16 top boot sector */
+#define INTEL_ID_28F320B3B 0x88978897 /* 32M = 2M x 16 bottom boot sector */
+#define INTEL_ID_28F640B3T 0x88988898 /* 64M = 4M x 16 top boot sector */
+#define INTEL_ID_28F640B3B 0x88998899 /* 64M = 4M x 16 bottom boot sector */
+#define INTEL_ID_28F160F3B 0x88F488F4 /* 16M = 1M x 16 bottom boot sector */
+
+#define INTEL_ID_28F800C3T 0x88C088C0 /* 8M = 512K x 16 top boot sector */
+#define INTEL_ID_28F800C3B 0x88C188C1 /* 8M = 512K x 16 bottom boot sector */
+#define INTEL_ID_28F160C3T 0x88C288C2 /* 16M = 1M x 16 top boot sector */
+#define INTEL_ID_28F160C3B 0x88C388C3 /* 16M = 1M x 16 bottom boot sector */
+#define INTEL_ID_28F320C3T 0x88C488C4 /* 32M = 2M x 16 top boot sector */
+#define INTEL_ID_28F320C3B 0x88C588C5 /* 32M = 2M x 16 bottom boot sector */
+#define INTEL_ID_28F640C3T 0x88CC88CC /* 64M = 4M x 16 top boot sector */
+#define INTEL_ID_28F640C3B 0x88CD88CD /* 64M = 4M x 16 bottom boot sector */
+
+#define INTEL_ID_28F128J3 0x89188918 /* 16M = 8M x 16 x 128 */
+#define INTEL_ID_28F320J5 0x00140014 /* 32M = 128K x 32 */
+#define INTEL_ID_28F640J5 0x00150015 /* 64M = 128K x 64 */
+#define INTEL_ID_28F320J3A 0x00160016 /* 32M = 128K x 32 */
+#define INTEL_ID_28F640J3A 0x00170017 /* 64M = 128K x 64 */
+#define INTEL_ID_28F256L18 0x88108810 /* 32M = 128K x 255 */
+#define INTEL_ID_28F128J3A 0x00180018 /* 128M = 128K x 128 */
+#define INTEL_ID_28F256L18T 0x880D880D /* 256M = 128K x 255 + 32k x 4 */
+#define INTEL_ID_28F256L18B 0x88108810 /* 256M = 32k x 4 + 128K x 255 */
+#define INTEL_ID_28F256P30B 0x891C891C /* 256M = 32k x 4 + 128K x 255 */
+#define INTEL_ID_28F256P30T 0x89198919 /* 256M = 128K x 255 + 32k x 4 */
+#define INTEL_ID_28F64K3 0x88018801 /* 64M = 32K x 255 + 32k x 4 */
+#define INTEL_ID_28F128K3 0x88028802 /* 128M = 64K x 255 + 32k x 4 */
+#define INTEL_ID_28F256K3 0x88038803 /* 256M = 128K x 255 + 32k x 4 */
+
+#define INTEL_ID_28F160S3 0x00D000D0 /* 16M = 512K x 32 (64kB x 32) */
+#define INTEL_ID_28F320S3 0x00D400D4 /* 32M = 512K x 64 (64kB x 64) */
+
+
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+
+/* Board support for 1 or 2 flash devices */
+#define FLASH_PORT_WIDTH32
+#undef FLASH_PORT_WIDTH16
+
+#ifdef FLASH_PORT_WIDTH16
+#define FLASH_PORT_WIDTH ushort
+#define FLASH_PORT_WIDTHV vu_short
+#define SWAP(x) (x)
+#else
+#define FLASH_PORT_WIDTH ulong
+#define FLASH_PORT_WIDTHV vu_long
+#define SWAP(x) (x)
+#endif
+
+/* Intel-compatible flash ID */
+#define INTEL_COMPAT 0x00890089
+#define INTEL_ALT 0x00B000B0
+
+
+
+/* Intel-compatible flash commands */
+#define INTEL_PROGRAM 0x00100010
+#define INTEL_ERASE 0x00200020
+#define INTEL_CLEAR 0x00500050
+#define INTEL_LOCKBIT 0x00600060
+#define INTEL_PROTECT 0x00010001
+#define INTEL_STATUS 0x00700070
+#define INTEL_READID 0x00900090
+#define INTEL_CONFIRM 0x00D000D0
+#define INTEL_RESET 0xFFFFFFFF
+
+/* Intel-compatible flash status bits */
+#define INTEL_FINISHED 0x00800080
+#define INTEL_OK 0x00800080
+
+#define FPW FLASH_PORT_WIDTH
+#define FPWV FLASH_PORT_WIDTHV
+
+#define mb() __asm__ __volatile__ ("" : : : "memory")
+
+///###CHD: auch wieder raus! + switch anweisung für den P30iger!
+/* Flash Organization Structure */
+typedef struct OrgDef {
+ unsigned int sector_number;
+ unsigned int sector_size;
+} OrgDef;
+
+/* Flash Organizations */
+OrgDef OrgIntel_28F256L18B[] = {
+ {4, 0x8000}, /* 4 * 32kBytes sectors */
+ {255, 0x20000}, /* 255 * 128kBytes sectors */
+};
+
+OrgDef OrgIntel_28F256L18T[] = {
+ {255, 0x20000}, /* 255 * 128kBytes sectors */
+ {4, 0x8000} /* 4 * 32kBytes sectors */
+};
+
+OrgDef OrgIntel_28F128J3A[] = {
+ {128, 0x20000}, /* 128 * 128kBytes sectors */
+};
+static unsigned int OrgSectTypeNum_28F256L18 = 2;
+static unsigned int OrgSectTypeNum_28F256J3 = 1;
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+static ulong flash_get_size (FPW *addr, flash_info_t *info);
+static int write_data (flash_info_t *info, ulong dest, FPW data);
+static void flash_get_offsets (ulong base, flash_info_t *info);
+void inline spin_wheel (void);
+static void flash_sync_real_protect (flash_info_t * info);
+static unsigned char intel_sector_protected (flash_info_t *info, ushort sector);
+
+/*-----------------------------------------------------------------------
+ */
+
+unsigned long flash_init (void)
+{
+ int i;
+ ulong size = 0;
+ extern void flash_preinit(void);
+ extern void flash_afterinit(ulong, ulong);
+ ulong flashbase = CFG_FLASH_BASE;
+
+ flash_preinit();
+
+ for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
+ switch (i) {
+ case 0:
+ memset(&flash_info[i], 0, sizeof(flash_info_t));
+ flash_get_size ((FPW *) flashbase, &flash_info[i]);
+ flash_get_offsets (flash_info[i].start[0], &flash_info[i]);
+ break;
+ default:
+ panic ("configured to many flash banks!\n");
+ break;
+ }
+ size += flash_info[i].size;
+
+ /* get the h/w and s/w protection status in sync */
+ flash_sync_real_protect(&flash_info[i]);
+ }
+
+ /* Protect monitor and environment sectors
+ */
+#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+#ifndef CONFIG_BOOT_ROM
+ flash_protect ( FLAG_PROTECT_SET,
+ CFG_MONITOR_BASE,
+ CFG_MONITOR_BASE + monitor_flash_len - 1,
+ &flash_info[0] );
+#endif
+#endif
+
+#ifdef CFG_ENV_IS_IN_FLASH
+ flash_protect ( FLAG_PROTECT_SET,
+ CFG_ENV_ADDR,
+ CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[0] );
+#endif
+
+ flash_afterinit(flash_info[0].start[0], flash_info[0].size);
+
+ return size;
+}
+
+/*-----------------------------------------------------------------------
+ */
+static void flash_get_offsets (ulong base, flash_info_t *info)
+{
+ int i;
+
+ if (info->flash_id == FLASH_UNKNOWN) {
+ return;
+ }
+
+ if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) {
+ for (i = 0; i < info->sector_count; i++) {
+ info->start[i] = base + (i * PHYS_FLASH_SECT_SIZE);
+ }
+ }
+}
+
+/*-----------------------------------------------------------------------
+ */
+void flash_print_info (flash_info_t *info)
+{
+ int i;
+
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf ("missing or unknown FLASH type\n");
+ return;
+ }
+
+ switch (info->flash_id & FLASH_VENDMASK) {
+ case FLASH_MAN_INTEL:
+ printf ("INTEL ");
+ break;
+ default:
+ printf ("Unknown Vendor ");
+ break;
+ }
+
+ switch (info->flash_id & FLASH_TYPEMASK) {
+ case FLASH_28F128J3A:
+ printf ("28F128J3A\n");
+ break;
+
+ case FLASH_28F640J3A:
+ printf ("28F640J3A\n");
+ break;
+
+ case FLASH_28F320J3A:
+ printf ("28F320J3A\n");
+ break;
+
+ case FLASH_28F256P30T:
+ printf ("FLASH_28F256P30T\n");
+ break;
+
+ default:
+ printf ("Unknown Chip Type\n");
+ break;
+ }
+
+ printf (" Size: %ld MB in %d Sectors\n",
+ info->size >> 20, info->sector_count);
+
+ printf (" Sector Start Addresses:");
+ for (i = 0; i < info->sector_count; ++i) {
+ if ((i % 5) == 0)
+ printf ("\n ");
+ printf (" %08lX%s",
+ info->start[i],
+ info->protect[i] ? " (RO)" : " ");
+ }
+ printf ("\n");
+ return;
+}
+
+/*
+ * The following code cannot be run from FLASH!
+ */
+static ulong flash_get_size (FPW *addr, flash_info_t *info)
+{
+ volatile FPW value;
+
+ /* Write auto select command: read Manufacturer ID */
+ addr[0x5555] = (FPW) 0x00AA00AA;
+ addr[0x2AAA] = (FPW) 0x00550055;
+ addr[0x5555] = (FPW) 0x00900090;
+
+ mb ();
+ udelay(100);
+
+ value = addr[0];
+
+ switch (value) {
+
+ case (FPW) INTEL_MANUFACT:
+ info->flash_id = FLASH_MAN_INTEL;
+ break;
+
+ default:
+ info->flash_id = FLASH_UNKNOWN;
+ info->sector_count = 0;
+ info->size = 0;
+ addr[0] = (FPW) 0x00FF00FF; /* restore read mode */
+ return (0); /* no or unknown flash */
+ }
+
+ mb ();
+ value = addr[1]; /* device ID */
+
+ switch (value) {
+
+ case (FPW) INTEL_ID_28F128J3A:
+ info->flash_id += FLASH_28F128J3A;
+ info->sector_count = 128;
+ info->size = 0x02000000;
+ info->start[0] = CFG_FLASH_BASE;
+ break; /* => 32 MB */
+
+ case (FPW) INTEL_ID_28F640J3A:
+ info->flash_id += FLASH_28F640J3A;
+ info->sector_count = 64;
+ info->size = 0x01000000;
+ info->start[0] = CFG_FLASH_BASE + 0x01000000;
+ break; /* => 16 MB */
+
+ case (FPW) (INTEL_ID_28F256P30T):
+ info->flash_id += FLASH_28F256L18B;
+ info->sector_count = 128;//falsch!!!
+ info->size = 0x02000000;
+ info->start[0] = CFG_FLASH_BASE;
+ debug ("Intel StrataFlash 28F256P30T device initialized\n");
+ break; /* => 32 MB */
+
+ case (FPW) INTEL_ID_28F320J3A:
+ info->flash_id += FLASH_28F320J3A;
+ info->sector_count = 32;
+ info->size = 0x800000;
+ info->start[0] = CFG_FLASH_BASE + 0x01800000;
+ break; /* => 8 MB */
+
+ default:
+ info->flash_id = FLASH_UNKNOWN;
+ break;
+ }
+
+ if (info->sector_count > CFG_MAX_FLASH_SECT) {
+ printf ("** ERROR: sector count %d > max (%d) **\n",
+ info->sector_count, CFG_MAX_FLASH_SECT);
+ info->sector_count = CFG_MAX_FLASH_SECT;
+ }
+
+ addr[0] = (FPW) 0x00FF00FF; /* restore read mode */
+
+ return (info->size);
+}
+
+
+/*
+ * This function gets the u-boot flash sector protection status
+ * (flash_info_t.protect[]) in sync with the sector protection
+ * status stored in hardware.
+ */
+static void flash_sync_real_protect (flash_info_t * info)
+{
+ int i;
+
+ switch (info->flash_id & FLASH_TYPEMASK) {
+
+ case FLASH_28F128J3A:
+ case FLASH_28F640J3A:
+ case FLASH_28F320J3A:
+ for (i = 0; i < info->sector_count; ++i) {
+ info->protect[i] = intel_sector_protected(info, i);
+ }
+ break;
+ default:
+ /* no h/w protect support */
+ break;
+ }
+}
+
+
+/*
+ * checks if "sector" in bank "info" is protected. Should work on intel
+ * strata flash chips 28FxxxJ3x in 8-bit mode.
+ * Returns 1 if sector is protected (or timed-out while trying to read
+ * protection status), 0 if it is not.
+ */
+static unsigned char intel_sector_protected (flash_info_t *info, ushort sector)
+{
+ FPWV *addr;
+ FPWV *lock_conf_addr;
+ ulong start;
+ unsigned char ret;
+
+ /*
+ * first, wait for the WSM to be finished. The rationale for
+ * waiting for the WSM to become idle for at most
+ * CFG_FLASH_ERASE_TOUT is as follows. The WSM can be busy
+ * because of: (1) erase, (2) program or (3) lock bit
+ * configuration. So we just wait for the longest timeout of
+ * the (1)-(3), i.e. the erase timeout.
+ */
+
+ /* wait at least 35ns (W12) before issuing Read Status Register */
+ udelay(1);
+ addr = (FPWV *) info->start[sector];
+ *addr = (FPW) INTEL_STATUS;
+
+ start = get_timer (0);
+ while ((*addr & (FPW) INTEL_FINISHED) != (FPW) INTEL_FINISHED) {
+ if (get_timer (start) > CFG_FLASH_ERASE_TOUT) {
+ *addr = (FPW) INTEL_RESET; /* restore read mode */
+ printf("WSM busy too long, can't get prot status\n");
+ return 1;
+ }
+ }
+
+ /* issue the Read Identifier Codes command */
+ *addr = (FPW) INTEL_READID;
+
+ /* wait at least 35ns (W12) before reading */
+ udelay(1);
+
+ /* Intel example code uses offset of 2 for 16 bit flash */
+ lock_conf_addr = (FPWV *) info->start[sector] + 2;
+ ret = (*lock_conf_addr & (FPW) INTEL_PROTECT) ? 1 : 0;
+
+ /* put flash back in read mode */
+ *addr = (FPW) INTEL_RESET;
+
+ return ret;
+}
+
+/*-----------------------------------------------------------------------
+ */
+
+int flash_erase (flash_info_t *info, int s_first, int s_last)
+{
+ int flag, prot, sect;
+ ulong type, start, last;
+ int rcode = 0;
+
+ if ((s_first < 0) || (s_first > s_last)) {
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf ("- missing\n");
+ } else {
+ printf ("- no sectors to erase\n");
+ }
+ return 1;
+ }
+
+ type = (info->flash_id & FLASH_VENDMASK);
+ if ((type != FLASH_MAN_INTEL)) {
+ printf ("Can't erase unknown flash type %08lx - aborted\n",
+ info->flash_id);
+ return 1;
+ }
+
+ prot = 0;
+ for (sect = s_first; sect <= s_last; ++sect) {
+ if (info->protect[sect]) {
+ prot++;
+ }
+ }
+
+ if (prot) {
+ printf ("- Warning: %d protected sectors will not be erased!\n",
+ prot);
+ } else {
+ printf ("\n");
+ }
+
+ start = get_timer (0);
+ last = start;
+
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts ();
+
+ /* Start erase on unprotected sectors */
+ for (sect = s_first; sect <= s_last; sect++) {
+ if (info->protect[sect] == 0) { /* not protected */
+ FPWV *addr = (FPWV *) (info->start[sect]);
+ FPW status;
+
+ printf ("Erasing sector %2d ... ", sect);
+
+ /* arm simple, non interrupt dependent timer */
+ start = get_timer(0);
+
+ *addr = (FPW) 0x00500050; /* clear status register */
+ *addr = (FPW) 0x00200020; /* erase setup */
+ *addr = (FPW) 0x00D000D0; /* erase confirm */
+
+ while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) {
+ if (get_timer(start) > CFG_FLASH_ERASE_TOUT) {
+ printf ("Timeout\n");
+ *addr = (FPW) 0x00B000B0; /* suspend erase */
+ *addr = (FPW) 0x00FF00FF; /* reset to read mode */
+ rcode = 1;
+ break;
+ }
+ }
+
+ *addr = 0x00500050; /* clear status register cmd. */
+ *addr = 0x00FF00FF; /* resest to read mode */
+
+ printf (" done\n");
+ }
+ }
+ return rcode;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ * 4 - Flash not identified
+ */
+
+int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
+{
+ ulong cp, wp;
+ FPW data;
+ int count, i, l, rc, port_width;
+
+ if (info->flash_id == FLASH_UNKNOWN) {
+ return 4;
+ }
+/* get lower word aligned address */
+#ifdef FLASH_PORT_WIDTH16
+ wp = (addr & ~1);
+ port_width = 2;
+#else
+ wp = (addr & ~3);
+ port_width = 4;
+#endif
+
+ /*
+ * handle unaligned start bytes
+ */
+ if ((l = addr - wp) != 0) {
+ data = 0;
+ for (i = 0, cp = wp; i < l; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *) cp);
+ }
+ for (; i < port_width && cnt > 0; ++i) {
+ data = (data << 8) | *src++;
+ --cnt;
+ ++cp;
+ }
+ for (; cnt == 0 && i < port_width; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *) cp);
+ }
+
+ if ((rc = write_data (info, wp, SWAP (data))) != 0) {
+ return (rc);
+ }
+ wp += port_width;
+ }
+
+ /*
+ * handle word aligned part
+ */
+ count = 0;
+ while (cnt >= port_width) {
+ data = 0;
+ for (i = 0; i < port_width; ++i) {
+ data = (data << 8) | *src++;
+ }
+ if ((rc = write_data (info, wp, SWAP (data))) != 0) {
+ return (rc);
+ }
+ wp += port_width;
+ cnt -= port_width;
+ if (count++ > 0x800) {
+ spin_wheel ();
+ count = 0;
+ }
+ }
+
+ if (cnt == 0) {
+ return (0);
+ }
+
+ /*
+ * handle unaligned tail bytes
+ */
+ data = 0;
+ for (i = 0, cp = wp; i < port_width && cnt > 0; ++i, ++cp) {
+ data = (data << 8) | *src++;
+ --cnt;
+ }
+ for (; i < port_width; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *) cp);
+ }
+
+ return (write_data (info, wp, SWAP (data)));
+}
+
+/*-----------------------------------------------------------------------
+ * Write a word or halfword to Flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+static int write_data (flash_info_t *info, ulong dest, FPW data)
+{
+ FPWV *addr = (FPWV *) dest;
+ ulong status;
+ ulong start;
+ int flag;
+
+ /* Check if Flash is (sufficiently) erased */
+ if ((*addr & data) != data) {
+ printf ("not erased at %08lx (%lx)\n", (ulong) addr, *addr);
+ return (2);
+ }
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts ();
+
+ *addr = (FPW) 0x00400040; /* write setup */
+ *addr = data;
+
+ /* arm simple, non interrupt dependent timer */
+ start = get_timer(0);
+
+ /* wait while polling the status register */
+ while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) {
+ if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+ *addr = (FPW) 0x00FF00FF; /* restore read mode */
+ return (1);
+ }
+ }
+
+ *addr = (FPW) 0x00FF00FF; /* restore read mode */
+
+ return (0);
+}
+
+void inline spin_wheel (void)
+{
+ static int p = 0;
+ static char w[] = "\\/-";
+
+ printf ("\010%c", w[p]);
+ (++p == 3) ? (p = 0) : 0;
+}
+
+/*-----------------------------------------------------------------------
+ * Set/Clear sector's lock bit, returns:
+ * 0 - OK
+ * 1 - Error (timeout, voltage problems, etc.)
+ */
+int flash_real_protect (flash_info_t *info, long sector, int prot)
+{
+ ulong start;
+ int i;
+ int rc = 0;
+ vu_long *addr = (vu_long *)(info->start[sector]);
+ int flag = disable_interrupts();
+
+ *addr = INTEL_CLEAR; /* Clear status register */
+ if (prot) { /* Set sector lock bit */
+ *addr = INTEL_LOCKBIT; /* Sector lock bit */
+ *addr = INTEL_PROTECT; /* set */
+ }
+ else { /* Clear sector lock bit */
+ *addr = INTEL_LOCKBIT; /* All sectors lock bits */
+ *addr = INTEL_CONFIRM; /* clear */
+ }
+
+ start = get_timer(0);
+
+ while ((*addr & INTEL_FINISHED) != INTEL_FINISHED) {
+ if (get_timer(start) > CFG_FLASH_UNLOCK_TOUT) {
+ printf("Flash lock bit operation timed out\n");
+ rc = 1;
+ break;
+ }
+ }
+
+ if (*addr != INTEL_OK) {
+ printf("Flash lock bit operation failed at %08X, CSR=%08X\n",
+ (uint)addr, (uint)*addr);
+ rc = 1;
+ }
+
+ if (!rc)
+ info->protect[sector] = prot;
+
+ /*
+ * Clear lock bit command clears all sectors lock bits, so
+ * we have to restore lock bits of protected sectors.
+ * WARNING: code below re-locks sectors only for one bank (info).
+ * This causes problems on boards where several banks share
+ * the same chip, as sectors in othere banks will be unlocked
+ * but not re-locked. It works fine on pm520 though, as there
+ * is only one chip and one bank.
+ */
+ if (!prot)
+ {
+ for (i = 0; i < info->sector_count; i++)
+ {
+ if (info->protect[i])
+ {
+ start = get_timer(0);
+ addr = (vu_long *)(info->start[i]);
+ *addr = INTEL_LOCKBIT; /* Sector lock bit */
+ *addr = INTEL_PROTECT; /* set */
+ while ((*addr & INTEL_FINISHED) != INTEL_FINISHED)
+ {
+ if (get_timer(start) > CFG_FLASH_UNLOCK_TOUT)
+ {
+ printf("Flash lock bit operation timed out\n");
+ rc = 1;
+ break;
+ }
+ }
+ }
+ }
+ /*
+ * get the s/w sector protection status in sync with the h/w,
+ * in case something went wrong during the re-locking.
+ */
+ flash_sync_real_protect(info); /* resets flash to read mode */
+ }
+
+ if (flag)
+ enable_interrupts();
+
+ *addr = INTEL_RESET; /* Reset to read array mode */
+
+ return rc;
+}
--- /dev/null
+/*
+ * (C) Copyright 2000-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+8 * MA 02111-1307 USA
+ */
+
+#ifndef _FLASH_H_
+#define _FLASH_H_
+
+#ifndef CFG_NO_FLASH
+/*-----------------------------------------------------------------------
+ * FLASH Info: contains chip specific data, per FLASH bank
+ */
+
+typedef struct {
+ ulong size; /* total bank size in bytes */
+ ushort sector_count; /* number of erase units */
+ ulong flash_id; /* combined device & manufacturer code */
+ ulong start[CFG_MAX_FLASH_SECT]; /* physical sector start addresses */
+ uchar protect[CFG_MAX_FLASH_SECT]; /* sector protection status */
+#ifdef CFG_FLASH_CFI
+ uchar portwidth; /* the width of the port */
+ uchar chipwidth; /* the width of the chip */
+ ushort buffer_size; /* # of bytes in write buffer */
+ ulong erase_blk_tout; /* maximum block erase timeout */
+ ulong write_tout; /* maximum write timeout */
+ ulong buffer_write_tout; /* maximum buffer write timeout */
+ ushort vendor; /* the primary vendor id */
+ ushort cmd_reset; /* Vendor specific reset command */
+ ushort interface; /* used for x8/x16 adjustments */
+#endif
+} flash_info_t;
+
+/*
+ * Values for the width of the port
+ */
+#define FLASH_CFI_8BIT 0x01
+#define FLASH_CFI_16BIT 0x02
+#define FLASH_CFI_32BIT 0x04
+#define FLASH_CFI_64BIT 0x08
+/*
+ * Values for the width of the chip
+ */
+#define FLASH_CFI_BY8 0x01
+#define FLASH_CFI_BY16 0x02
+#define FLASH_CFI_BY32 0x04
+#define FLASH_CFI_BY64 0x08
+/* convert between bit value and numeric value */
+#define CFI_FLASH_SHIFT_WIDTH 3
+/*
+ * Values for the flash device interface
+ */
+#define FLASH_CFI_X8 0x00
+#define FLASH_CFI_X16 0x01
+#define FLASH_CFI_X8X16 0x02
+
+/* convert between bit value and numeric value */
+#define CFI_FLASH_SHIFT_WIDTH 3
+/* Prototypes */
+
+extern unsigned long flash_init (void);
+extern void flash_print_info (flash_info_t *);
+extern int flash_erase (flash_info_t *, int, int);
+extern int flash_sect_erase (ulong addr_first, ulong addr_last);
+extern int flash_sect_protect (int flag, ulong addr_first, ulong addr_last);
+
+/* common/flash.c */
+extern void flash_protect (int flag, ulong from, ulong to, flash_info_t *info);
+extern int flash_write (uchar *, ulong, ulong);
+extern flash_info_t *addr2info (ulong);
+extern int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt);
+
+/* board/?/flash.c */
+#if defined(CFG_FLASH_PROTECTION)
+extern int flash_real_protect(flash_info_t *info, long sector, int prot);
+extern void flash_read_user_serial(flash_info_t * info, void * buffer, int offset, int len);
+extern void flash_read_factory_serial(flash_info_t * info, void * buffer, int offset, int len);
+#endif /* CFG_FLASH_PROTECTION */
+
+/*-----------------------------------------------------------------------
+ * return codes from flash_write():
+ */
+#define ERR_OK 0
+#define ERR_TIMOUT 1
+#define ERR_NOT_ERASED 2
+#define ERR_PROTECTED 4
+#define ERR_INVAL 8
+#define ERR_ALIGN 16
+#define ERR_UNKNOWN_FLASH_VENDOR 32
+#define ERR_UNKNOWN_FLASH_TYPE 64
+#define ERR_PROG_ERROR 128
+
+/*-----------------------------------------------------------------------
+ * Protection Flags for flash_protect():
+ */
+#define FLAG_PROTECT_SET 0x01
+#define FLAG_PROTECT_CLEAR 0x02
+
+/*-----------------------------------------------------------------------
+ * Device IDs
+ */
+
+#define AMD_MANUFACT 0x00010001 /* AMD manuf. ID in D23..D16, D7..D0 */
+#define FUJ_MANUFACT 0x00040004 /* FUJITSU manuf. ID in D23..D16, D7..D0 */
+#define ATM_MANUFACT 0x001F001F /* ATMEL */
+#define STM_MANUFACT 0x00200020 /* STM (Thomson) manuf. ID in D23.. -"- */
+#define SST_MANUFACT 0x00BF00BF /* SST manuf. ID in D23..D16, D7..D0 */
+#define MT_MANUFACT 0x00890089 /* MT manuf. ID in D23..D16, D7..D0 */
+#define INTEL_MANUFACT 0x00890089 /* INTEL manuf. ID in D23..D16, D7..D0 */
+#define INTEL_ALT_MANU 0x00B000B0 /* alternate INTEL namufacturer ID */
+#define MX_MANUFACT 0x00C200C2 /* MXIC manuf. ID in D23..D16, D7..D0 */
+#define TOSH_MANUFACT 0x00980098 /* TOSHIBA manuf. ID in D23..D16, D7..D0 */
+#define MT2_MANUFACT 0x002C002C /* alternate MICRON manufacturer ID*/
+#define EXCEL_MANUFACT 0x004A004A /* Excel Semiconductor */
+
+ /* Micron Technologies (INTEL compat.) */
+#define MT_ID_28F400_T 0x44704470 /* 28F400B3 ID ( 4 M, top boot sector) */
+#define MT_ID_28F400_B 0x44714471 /* 28F400B3 ID ( 4 M, bottom boot sect) */
+
+#define AMD_ID_LV040B 0x4F /* 29LV040B ID */
+ /* 4 Mbit, 512K x 8, */
+ /* 8 64K x 8 uniform sectors */
+
+#define AMD_ID_F040B 0xA4 /* 29F040B ID */
+ /* 4 Mbit, 512K x 8, */
+ /* 8 64K x 8 uniform sectors */
+#define STM_ID_M29W040B 0xE3 /* M29W040B ID */
+ /* 4 Mbit, 512K x 8, */
+ /* 8 64K x 8 uniform sectors */
+#define AMD_ID_F080B 0xD5 /* 29F080 ID ( 1 M) */
+ /* 8 Mbit, 512K x 16, */
+ /* 8 64K x 16 uniform sectors */
+#define AMD_ID_F016D 0xAD /* 29F016 ID ( 2 M x 8) */
+#define AMD_ID_F032B 0x41 /* 29F032 ID ( 4 M x 8) */
+#define AMD_ID_LV116DT 0xC7 /* 29LV116DT ( 2 M x 8, top boot sect) */
+#define AMD_ID_LV116DB 0x4C /* 29LV116DB ( 2 M x 8, bottom boot sect) */
+#define AMD_ID_LV016B 0xc8 /* 29LV016 ID ( 2 M x 8) */
+
+#define AMD_ID_PL160CB 0x22452245 /* 29PL160CB ID (16 M, bottom boot sect */
+
+#define AMD_ID_LV400T 0x22B922B9 /* 29LV400T ID ( 4 M, top boot sector) */
+#define AMD_ID_LV400B 0x22BA22BA /* 29LV400B ID ( 4 M, bottom boot sect) */
+
+#define AMD_ID_LV033C 0xA3 /* 29LV033C ID ( 4 M x 8) */
+#define AMD_ID_LV065D 0x93 /* 29LV065D ID ( 8 M x 8) */
+
+#define AMD_ID_LV800T 0x22DA22DA /* 29LV800T ID ( 8 M, top boot sector) */
+#define AMD_ID_LV800B 0x225B225B /* 29LV800B ID ( 8 M, bottom boot sect) */
+
+#define AMD_ID_LV160T 0x22C422C4 /* 29LV160T ID (16 M, top boot sector) */
+#define AMD_ID_LV160B 0x22492249 /* 29LV160B ID (16 M, bottom boot sect) */
+
+#define AMD_ID_DL163T 0x22282228 /* 29DL163T ID (16 M, top boot sector) */
+#define AMD_ID_DL163B 0x222B222B /* 29DL163B ID (16 M, bottom boot sect) */
+
+#define AMD_ID_LV320T 0x22F622F6 /* 29LV320T ID (32 M, top boot sector) */
+#define MX_ID_LV320T 0x22A722A7 /* 29LV320T by Macronix, AMD compatible */
+#define AMD_ID_LV320B 0x22F922F9 /* 29LV320B ID (32 M, bottom boot sect) */
+#define MX_ID_LV320B 0x22A822A8 /* 29LV320B by Macronix, AMD compatible */
+
+#define AMD_ID_DL322T 0x22552255 /* 29DL322T ID (32 M, top boot sector) */
+#define AMD_ID_DL322B 0x22562256 /* 29DL322B ID (32 M, bottom boot sect) */
+#define AMD_ID_DL323T 0x22502250 /* 29DL323T ID (32 M, top boot sector) */
+#define AMD_ID_DL323B 0x22532253 /* 29DL323B ID (32 M, bottom boot sect) */
+#define AMD_ID_DL324T 0x225C225C /* 29DL324T ID (32 M, top boot sector) */
+#define AMD_ID_DL324B 0x225F225F /* 29DL324B ID (32 M, bottom boot sect) */
+
+#define AMD_ID_DL640 0x227E227E /* 29DL640D ID (64 M, dual boot sectors)*/
+#define AMD_ID_MIRROR 0x227E227E /* 1st ID word for MirrorBit family */
+#define AMD_ID_DL640G_2 0x22022202 /* 2nd ID word for AM29DL640G at 0x38 */
+#define AMD_ID_DL640G_3 0x22012201 /* 3rd ID word for AM29DL640G at 0x3c */
+#define AMD_ID_LV640U_2 0x220C220C /* 2nd ID word for AM29LV640M at 0x38 */
+#define AMD_ID_LV640U_3 0x22012201 /* 3rd ID word for AM29LV640M at 0x3c */
+#define AMD_ID_LV640MT_2 0x22102210 /* 2nd ID word for AM29LV640MT at 0x38 */
+#define AMD_ID_LV640MT_3 0x22012201 /* 3rd ID word for AM29LV640MT at 0x3c */
+#define AMD_ID_LV640MB_2 0x22102210 /* 2nd ID word for AM29LV640MB at 0x38 */
+#define AMD_ID_LV640MB_3 0x22002200 /* 3rd ID word for AM29LV640MB at 0x3c */
+#define AMD_ID_LV128U_2 0x22122212 /* 2nd ID word for AM29LV128M at 0x38 */
+#define AMD_ID_LV128U_3 0x22002200 /* 3rd ID word for AM29LV128M at 0x3c */
+#define AMD_ID_LV256U_2 0x22122212 /* 2nd ID word for AM29LV256M at 0x38 */
+#define AMD_ID_LV256U_3 0x22012201 /* 3rd ID word for AM29LV256M at 0x3c */
+#define AMD_ID_GL064M_2 0x22132213 /* 2nd ID word for S29GL064M-R6 */
+#define AMD_ID_GL064M_3 0x22012201 /* 3rd ID word for S29GL064M-R6 */
+
+#define AMD_ID_LV320B_2 0x221A221A /* 2d ID word for AM29LV320MB at 0x38 */
+#define AMD_ID_LV320B_3 0x22002200 /* 3d ID word for AM29LV320MB at 0x3c */
+
+#define AMD_ID_LV640U 0x22D722D7 /* 29LV640U ID (64 M, uniform sectors) */
+
+#define ATM_ID_BV1614 0x000000C0 /* 49BV1614 ID */
+#define ATM_ID_BV1614A 0x000000C8 /* 49BV1614A ID */
+#define ATM_ID_BV6416 0x000000D6 /* 49BV6416 ID */
+
+#define FUJI_ID_29F800BA 0x22582258 /* MBM29F800BA ID (8M) */
+#define FUJI_ID_29F800TA 0x22D622D6 /* MBM29F800TA ID (8M) */
+#define FUJI_ID_29LV650UE 0x22d722d7 /* MBM29LV650UE/651UE ID (8M = 128 x 32kWord) */
+
+#define SST_ID_xF200A 0x27892789 /* 39xF200A ID ( 2M = 128K x 16 ) */
+#define SST_ID_xF400A 0x27802780 /* 39xF400A ID ( 4M = 256K x 16 ) */
+#define SST_ID_xF800A 0x27812781 /* 39xF800A ID ( 8M = 512K x 16 ) */
+#define SST_ID_xF160A 0x27822782 /* 39xF800A ID (16M = 1M x 16 ) */
+#define SST_ID_xF1601 0x234B234B /* 39xF1601 ID (16M = 1M x 16 ) */
+#define SST_ID_xF1602 0x234A234A /* 39xF1602 ID (16M = 1M x 16 ) */
+#define SST_ID_xF3201 0x235B235B /* 39xF3201 ID (32M = 2M x 16 ) */
+#define SST_ID_xF3202 0x235A235A /* 39xF3202 ID (32M = 2M x 16 ) */
+#define SST_ID_xF6401 0x236B236B /* 39xF6401 ID (64M = 4M x 16 ) */
+#define SST_ID_xF6402 0x236A236A /* 39xF6402 ID (64M = 4M x 16 ) */
+#define SST_ID_xF040 0xBFD7BFD7 /* 39xF040 ID (512KB = 4Mbit x 8) */
+
+#define STM_ID_F040B 0xE2 /* M29F040B ID ( 4M = 512K x 8 ) */
+ /* 8 64K x 8 uniform sectors */
+
+#define STM_ID_x800AB 0x005B005B /* M29W800AB ID (8M = 512K x 16 ) */
+#define STM_ID_29W320DT 0x22CA22CA /* M29W320DT ID (32 M, top boot sector) */
+#define STM_ID_29W320DB 0x22CB22CB /* M29W320DB ID (32 M, bottom boot sect) */
+#define STM_ID_29W040B 0x00E300E3 /* M29W040B ID (4M = 512K x 8) */
+
+#define INTEL_ID_28F016S 0x66a066a0 /* 28F016S[VS] ID (16M = 512k x 16) */
+#define INTEL_ID_28F800B3T 0x88928892 /* 8M = 512K x 16 top boot sector */
+#define INTEL_ID_28F800B3B 0x88938893 /* 8M = 512K x 16 bottom boot sector */
+#define INTEL_ID_28F160B3T 0x88908890 /* 16M = 1M x 16 top boot sector */
+#define INTEL_ID_28F160B3B 0x88918891 /* 16M = 1M x 16 bottom boot sector */
+#define INTEL_ID_28F320B3T 0x88968896 /* 32M = 2M x 16 top boot sector */
+#define INTEL_ID_28F320B3B 0x88978897 /* 32M = 2M x 16 bottom boot sector */
+#define INTEL_ID_28F640B3T 0x88988898 /* 64M = 4M x 16 top boot sector */
+#define INTEL_ID_28F640B3B 0x88998899 /* 64M = 4M x 16 bottom boot sector */
+#define INTEL_ID_28F160F3B 0x88F488F4 /* 16M = 1M x 16 bottom boot sector */
+
+#define INTEL_ID_28F800C3T 0x88C088C0 /* 8M = 512K x 16 top boot sector */
+#define INTEL_ID_28F800C3B 0x88C188C1 /* 8M = 512K x 16 bottom boot sector */
+#define INTEL_ID_28F160C3T 0x88C288C2 /* 16M = 1M x 16 top boot sector */
+#define INTEL_ID_28F160C3B 0x88C388C3 /* 16M = 1M x 16 bottom boot sector */
+#define INTEL_ID_28F320C3T 0x88C488C4 /* 32M = 2M x 16 top boot sector */
+#define INTEL_ID_28F320C3B 0x88C588C5 /* 32M = 2M x 16 bottom boot sector */
+#define INTEL_ID_28F640C3T 0x88CC88CC /* 64M = 4M x 16 top boot sector */
+#define INTEL_ID_28F640C3B 0x88CD88CD /* 64M = 4M x 16 bottom boot sector */
+
+#define INTEL_ID_28F128J3 0x89188918 /* 16M = 8M x 16 x 128 */
+#define INTEL_ID_28F320J5 0x00140014 /* 32M = 128K x 32 */
+#define INTEL_ID_28F640J5 0x00150015 /* 64M = 128K x 64 */
+#define INTEL_ID_28F320J3A 0x00160016 /* 32M = 128K x 32 */
+#define INTEL_ID_28F640J3A 0x00170017 /* 64M = 128K x 64 */
+#define INTEL_ID_28F256L18 0x88108810 /* 32M = 128K x 255 */
+#define INTEL_ID_28F128J3A 0x00180018 /* 128M = 128K x 128 */
+#define INTEL_ID_28F256L18T 0x880D880D /* 256M = 128K x 255 + 32k x 4 */
+#define INTEL_ID_28F256L18B 0x88108810 /* 256M = 32k x 4 + 128K x 255 */
+#define INTEL_ID_28F256P30B 0x891C891C /* 256M = 32k x 4 + 128K x 255 */
+#define INTEL_ID_28F256P30T 0x89198919 /* 256M = 128K x 255 + 32k x 4 */
+#define INTEL_ID_28F64K3 0x88018801 /* 64M = 32K x 255 + 32k x 4 */
+#define INTEL_ID_28F128K3 0x88028802 /* 128M = 64K x 255 + 32k x 4 */
+#define INTEL_ID_28F256K3 0x88038803 /* 256M = 128K x 255 + 32k x 4 */
+
+#define INTEL_ID_28F160S3 0x00D000D0 /* 16M = 512K x 32 (64kB x 32) */
+#define INTEL_ID_28F320S3 0x00D400D4 /* 32M = 512K x 64 (64kB x 64) */
+
+/* Note that the Sharp 28F016SC is compatible with the Intel E28F016SC */
+#define SHARP_ID_28F016SCL 0xAAAAAAAA /* LH28F016SCT-L95 2Mx8, 32 64k blocks */
+#define SHARP_ID_28F016SCZ 0xA0A0A0A0 /* LH28F016SCT-Z4 2Mx8, 32 64k blocks */
+#define SHARP_ID_28F008SC 0xA6A6A6A6 /* LH28F008SCT-L12 1Mx8, 16 64k blocks */
+ /* LH28F008SCR-L85 1Mx8, 16 64k blocks */
+
+#define TOSH_ID_FVT160 0xC2 /* TC58FVT160 ID (16 M, top ) */
+#define TOSH_ID_FVB160 0x43 /* TC58FVT160 ID (16 M, bottom ) */
+
+/*-----------------------------------------------------------------------
+ * Internal FLASH identification codes
+ *
+ * Be careful when adding new type! Odd numbers are "bottom boot sector" types!
+ */
+
+#define FLASH_AM040 0x0001 /* AMD Am29F040B, Am29LV040B */
+ /* Bright Micro BM29F040 */
+ /* Fujitsu MBM29F040A */
+ /* STM M29W040B */
+ /* SGS Thomson M29F040B */
+ /* 8 64K x 8 uniform sectors */
+#define FLASH_AM400T 0x0002 /* AMD AM29LV400 */
+#define FLASH_AM400B 0x0003
+#define FLASH_AM800T 0x0004 /* AMD AM29LV800 */
+#define FLASH_AM800B 0x0005
+#define FLASH_AM116DT 0x0026 /* AMD AM29LV116DT (2Mx8bit) */
+#define FLASH_AM116DB 0x0027 /* AMD AM29LV116DB (2Mx8bit) */
+#define FLASH_AM160T 0x0006 /* AMD AM29LV160 */
+#define FLASH_AM160LV 0x0046 /* AMD29LV160DB (2M = 2Mx8bit ) */
+#define FLASH_AM160B 0x0007
+#define FLASH_AM320T 0x0008 /* AMD AM29LV320 */
+#define FLASH_AM320B 0x0009
+
+#define FLASH_AM080 0x000A /* AMD Am29F080B */
+ /* 16 64K x 8 uniform sectors */
+
+#define FLASH_AMDL322T 0x0010 /* AMD AM29DL322 */
+#define FLASH_AMDL322B 0x0011
+#define FLASH_AMDL323T 0x0012 /* AMD AM29DL323 */
+#define FLASH_AMDL323B 0x0013
+#define FLASH_AMDL324T 0x0014 /* AMD AM29DL324 */
+#define FLASH_AMDL324B 0x0015
+
+#define FLASH_AMDLV033C 0x0018
+#define FLASH_AMDLV065D 0x001A
+
+#define FLASH_AMDL640 0x0016 /* AMD AM29DL640D */
+#define FLASH_AMD016 0x0018 /* AMD AM29F016D */
+#define FLASH_AMDL640MB 0x0019 /* AMD AM29LV640MB (64M, bottom boot sect)*/
+#define FLASH_AMDL640MT 0x001A /* AMD AM29LV640MT (64M, top boot sect) */
+
+#define FLASH_SST200A 0x0040 /* SST 39xF200A ID ( 2M = 128K x 16 ) */
+#define FLASH_SST400A 0x0042 /* SST 39xF400A ID ( 4M = 256K x 16 ) */
+#define FLASH_SST800A 0x0044 /* SST 39xF800A ID ( 8M = 512K x 16 ) */
+#define FLASH_SST160A 0x0046 /* SST 39xF160A ID ( 16M = 1M x 16 ) */
+#define FLASH_SST320 0x0048 /* SST 39xF160A ID ( 16M = 1M x 16 ) */
+#define FLASH_SST640 0x004A /* SST 39xF160A ID ( 16M = 1M x 16 ) */
+#define FLASH_SST040 0x000E /* SST 39xF040 ID (512KB = 4Mbit x 8 ) */
+
+#define FLASH_STM800AB 0x0051 /* STM M29WF800AB ( 8M = 512K x 16 ) */
+#define FLASH_STMW320DT 0x0052 /* STM M29W320DT (32 M, top boot sector) */
+#define FLASH_STMW320DB 0x0053 /* STM M29W320DB (32 M, bottom boot sect)*/
+#define FLASH_STM320DB 0x00CB /* STM M29W320DB (4M = 64K x 64, bottom)*/
+#define FLASH_STM800DT 0x00D7 /* STM M29W800DT (1M = 64K x 16, top) */
+#define FLASH_STM800DB 0x005B /* STM M29W800DB (1M = 64K x 16, bottom)*/
+
+#define FLASH_28F400_T 0x0062 /* MT 28F400B3 ID ( 4M = 256K x 16 ) */
+#define FLASH_28F400_B 0x0063 /* MT 28F400B3 ID ( 4M = 256K x 16 ) */
+
+#define FLASH_INTEL800T 0x0074 /* INTEL 28F800B3T ( 8M = 512K x 16 ) */
+#define FLASH_INTEL800B 0x0075 /* INTEL 28F800B3B ( 8M = 512K x 16 ) */
+#define FLASH_INTEL160T 0x0076 /* INTEL 28F160B3T ( 16M = 1 M x 16 ) */
+#define FLASH_INTEL160B 0x0077 /* INTEL 28F160B3B ( 16M = 1 M x 16 ) */
+#define FLASH_INTEL320T 0x0078 /* INTEL 28F320B3T ( 32M = 2 M x 16 ) */
+#define FLASH_INTEL320B 0x0079 /* INTEL 28F320B3B ( 32M = 2 M x 16 ) */
+#define FLASH_INTEL640T 0x007A /* INTEL 28F320B3T ( 64M = 4 M x 16 ) */
+#define FLASH_INTEL640B 0x007B /* INTEL 28F320B3B ( 64M = 4 M x 16 ) */
+
+#define FLASH_28F008S5 0x0080 /* Intel 28F008S5 ( 1M = 64K x 16 ) */
+#define FLASH_28F016SV 0x0081 /* Intel 28F016SV ( 16M = 512k x 32 ) */
+#define FLASH_28F800_B 0x0083 /* Intel E28F800B ( 1M = ? ) */
+#define FLASH_AM29F800B 0x0084 /* AMD Am29F800BB ( 1M = ? ) */
+#define FLASH_28F320J5 0x0085 /* Intel 28F320J5 ( 4M = 128K x 32 ) */
+#define FLASH_28F160S3 0x0086 /* Intel 28F160S3 ( 16M = 512K x 32 ) */
+#define FLASH_28F320S3 0x0088 /* Intel 28F320S3 ( 32M = 512K x 64 ) */
+#define FLASH_AM640U 0x0090 /* AMD Am29LV640U ( 64M = 4M x 16 ) */
+#define FLASH_AM033C 0x0091 /* AMD AM29LV033 ( 32M = 4M x 8 ) */
+#define FLASH_LH28F016SCT 0x0092 /* Sharp 28F016SCT ( 8 Meg Flash SIMM ) */
+#define FLASH_28F160F3B 0x0093 /* Intel 28F160F3B ( 16M = 1M x 16 ) */
+
+#define FLASH_28F640J5 0x0099 /* INTEL 28F640J5 ( 64M = 128K x 64) */
+
+#define FLASH_28F800C3T 0x009A /* Intel 28F800C3T ( 8M = 512K x 16 ) */
+#define FLASH_28F800C3B 0x009B /* Intel 28F800C3B ( 8M = 512K x 16 ) */
+#define FLASH_28F160C3T 0x009C /* Intel 28F160C3T ( 16M = 1M x 16 ) */
+#define FLASH_28F160C3B 0x009D /* Intel 28F160C3B ( 16M = 1M x 16 ) */
+#define FLASH_28F320C3T 0x009E /* Intel 28F320C3T ( 32M = 2M x 16 ) */
+#define FLASH_28F320C3B 0x009F /* Intel 28F320C3B ( 32M = 2M x 16 ) */
+#define FLASH_28F640C3T 0x00A0 /* Intel 28F640C3T ( 64M = 4M x 16 ) */
+#define FLASH_28F640C3B 0x00A1 /* Intel 28F640C3B ( 64M = 4M x 16 ) */
+#define FLASH_AMLV320U 0x00A2 /* AMD 29LV320M ( 32M = 2M x 16 ) */
+#define FLASH_AMLV640U 0x00A4 /* AMD 29LV640M ( 64M = 4M x 16 ) */
+#define FLASH_AMLV128U 0x00A6 /* AMD 29LV128M ( 128M = 8M x 16 ) */
+#define FLASH_AMLV320B 0x00A7 /* AMD 29LV320MB ( 32M = 2M x 16 ) */
+#define FLASH_AMLV320T 0x00A8 /* AMD 29LV320MT ( 32M = 2M x 16 ) */
+#define FLASH_AMLV256U 0x00AA /* AMD 29LV256M ( 256M = 16M x 16 ) */
+#define FLASH_MXLV320B 0x00AB /* MX 29LV320MB ( 32M = 2M x 16 ) */
+#define FLASH_MXLV320T 0x00AC /* MX 29LV320MT ( 32M = 2M x 16 ) */
+#define FLASH_28F256L18T 0x00B0 /* Intel 28F256L18T ( 32M = 128K x 255 + 32k x 4) */
+#define FLASH_28F256L18B 0x00B1 /* Intel 28F256L18B ( 32M = 32k x 4 + 128K x 255) */
+#define FLASH_28F256P30B 0x001C /* Intel 28F256P30B ( 32M = 32k x 4 + 128K x 255) */
+#define FLASH_28F256P30T 0x0019 /* Intel 28F256P30T ( 128K x 255 + 32M = 32k x 4 + */
+#define FLASH_AMDL163T 0x00B2 /* AMD AM29DL163T (2M x 16 ) */
+#define FLASH_AMDL163B 0x00B3
+#define FLASH_28F64K3 0x00B4 /* Intel 28F64K3 ( 64M) */
+#define FLASH_28F128K3 0x00B6 /* Intel 28F128K3 ( 128M = 8M x 16 ) */
+#define FLASH_28F256K3 0x00B8 /* Intel 28F256K3 ( 256M = 16M x 16 ) */
+
+#define FLASH_28F320J3A 0x00C0 /* INTEL 28F320J3A ( 32M = 128K x 32) */
+#define FLASH_28F640J3A 0x00C2 /* INTEL 28F640J3A ( 64M = 128K x 64) */
+#define FLASH_28F128J3A 0x00C4 /* INTEL 28F128J3A (128M = 128K x 128) */
+
+#define FLASH_FUJLV650 0x00D0 /* Fujitsu MBM 29LV650UE/651UE */
+#define FLASH_MT28S4M16LC 0x00E1 /* Micron MT28S4M16LC */
+#define FLASH_S29GL064M 0x00F0 /* Spansion S29GL064M-R6 */
+
+#define FLASH_UNKNOWN 0xFFFF /* unknown flash type */
+
+
+/* manufacturer offsets
+ */
+#define FLASH_MAN_AMD 0x00000000 /* AMD */
+#define FLASH_MAN_FUJ 0x00010000 /* Fujitsu */
+#define FLASH_MAN_BM 0x00020000 /* Bright Microelectronics */
+#define FLASH_MAN_MX 0x00030000 /* MXIC */
+#define FLASH_MAN_STM 0x00040000
+#define FLASH_MAN_TOSH 0x00050000 /* Toshiba */
+#define FLASH_MAN_EXCEL 0x00060000 /* Excel Semiconductor */
+#define FLASH_MAN_SST 0x00100000
+#define FLASH_MAN_INTEL 0x00300000
+#define FLASH_MAN_MT 0x00400000
+#define FLASH_MAN_SHARP 0x00500000
+
+
+#define FLASH_TYPEMASK 0x0000FFFF /* extract FLASH type information */
+#define FLASH_VENDMASK 0xFFFF0000 /* extract FLASH vendor information */
+
+#define FLASH_AMD_COMP 0x000FFFFF /* Up to this ID, FLASH is compatible */
+ /* with AMD, Fujitsu and SST */
+ /* (JEDEC standard commands ?) */
+
+#define FLASH_BTYPE 0x0001 /* mask for bottom boot sector type */
+
+/*-----------------------------------------------------------------------
+ * Timeout constants:
+ *
+ * We can't find any specifications for maximum chip erase times,
+ * so these values are guestimates.
+ */
+#define FLASH_ERASE_TIMEOUT 120000 /* timeout for erasing in ms */
+#define FLASH_WRITE_TIMEOUT 500 /* timeout for writes in ms */
+
+#endif /* !CFG_NO_FLASH */
+
+#endif /* _FLASH_H_ */
--- /dev/null
+/*
+ * (C) Copyright 2003-2006
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2004
+ * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <mpc5xxx.h>
+#include <pci.h>
+
+//###CHD: es gibt eigentlich kein DDR bei uns -> weg damit!; dto. PCI!
+#if defined(CONFIG_MPC5200_DDR)
+#include "mt46v16m16-75.h"
+#else
+//#include "mt48lc16m16a2-75.h"
+#include "mt48lc8m32b2-6-7.h"
+#endif
+
+//###CHD: wenn RAMBOOT gehen wuerde, ....
+#ifndef CFG_RAMBOOT
+static void sdram_start (int hi_addr)
+{
+ long hi_addr_bit = hi_addr ? 0x01000000 : 0;
+
+ /* unlock mode register */
+ *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000000 | hi_addr_bit;
+ __asm__ volatile ("sync");
+
+ /* precharge all banks */
+ *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000002 | hi_addr_bit;
+ __asm__ volatile ("sync");
+
+#if SDRAM_DDR
+ /* set mode register: extended mode */
+ *(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_EMODE;
+ __asm__ volatile ("sync");
+
+ /* set mode register: reset DLL */
+ *(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_MODE | 0x04000000;
+ __asm__ volatile ("sync");
+#endif
+
+ /* precharge all banks */
+ *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000002 | hi_addr_bit;
+ __asm__ volatile ("sync");
+
+ /* auto refresh */
+ *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000004 | hi_addr_bit;
+ __asm__ volatile ("sync");
+
+ /* set mode register */
+ *(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_MODE;
+ __asm__ volatile ("sync");
+
+ /* normal operation */
+ *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | hi_addr_bit;
+ __asm__ volatile ("sync");
+}
+#endif
+
+/*
+ * ATTENTION: Although partially referenced initdram does NOT make real use
+ * use of CFG_SDRAM_BASE. The code does not work if CFG_SDRAM_BASE
+ * is something else than 0x00000000.
+ */
+
+#if defined(CONFIG_MPC5200)
+long int initdram (int board_type)
+{
+ ulong dramsize = 0;
+ ulong dramsize2 = 0;
+#ifndef CFG_RAMBOOT
+ ulong test1, test2;
+
+ /* setup SDRAM chip selects */
+ *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x0000001e;/* 2G at 0x0 */
+ *(vu_long *)MPC5XXX_SDRAM_CS1CFG = 0x80000000;/* disabled */
+ __asm__ volatile ("sync");
+
+ /* setup config registers */
+ *(vu_long *)MPC5XXX_SDRAM_CONFIG1 = SDRAM_CONFIG1;
+ *(vu_long *)MPC5XXX_SDRAM_CONFIG2 = SDRAM_CONFIG2;
+ __asm__ volatile ("sync");
+
+#if SDRAM_DDR
+ /* set tap delay */
+ *(vu_long *)MPC5XXX_CDM_PORCFG = SDRAM_TAPDELAY;
+ __asm__ volatile ("sync");
+#endif
+
+ /* find RAM size using SDRAM CS0 only */
+ sdram_start(0);
+ test1 = get_ram_size((long *)CFG_SDRAM_BASE, 0x80000000);
+ sdram_start(1);
+ test2 = get_ram_size((long *)CFG_SDRAM_BASE, 0x80000000);
+ if (test1 > test2) {
+ sdram_start(0);
+ dramsize = test1;
+ } else {
+ dramsize = test2;
+ }
+
+ /* memory smaller than 1MB is impossible */
+ if (dramsize < (1 << 20)) {
+ dramsize = 0;
+ }
+
+ /* set SDRAM CS0 size according to the amount of RAM found */
+ if (dramsize > 0) {
+ *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x13 + __builtin_ffs(dramsize >> 20) - 1;
+ } else {
+ *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0; /* disabled */
+ }
+
+ /* let SDRAM CS1 start right after CS0 */
+ *(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize + 0x0000001e;/* 2G */
+
+ /* find RAM size using SDRAM CS1 only */
+ if (!dramsize)
+ sdram_start(0);
+ test2 = test1 = get_ram_size((long *)(CFG_SDRAM_BASE + dramsize), 0x80000000);
+ if (!dramsize) {
+ sdram_start(1);
+ test2 = get_ram_size((long *)(CFG_SDRAM_BASE + dramsize), 0x80000000);
+ }
+ if (test1 > test2) {
+ sdram_start(0);
+ dramsize2 = test1;
+ } else {
+ dramsize2 = test2;
+ }
+
+ /* memory smaller than 1MB is impossible */
+ if (dramsize2 < (1 << 20)) {
+ dramsize2 = 0;
+ }
+
+ /* set SDRAM CS1 size according to the amount of RAM found */
+ if (dramsize2 > 0) {
+ *(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize
+ | (0x13 + __builtin_ffs(dramsize2 >> 20) - 1);
+ } else {
+ *(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize; /* disabled */
+ }
+
+#else /* CFG_RAMBOOT */
+
+ /* retrieve size of memory connected to SDRAM CS0 */
+ dramsize = *(vu_long *)MPC5XXX_SDRAM_CS0CFG & 0xFF;
+ if (dramsize >= 0x13) {
+ dramsize = (1 << (dramsize - 0x13)) << 20;
+ } else {
+ dramsize = 0;
+ }
+
+ /* retrieve size of memory connected to SDRAM CS1 */
+ dramsize2 = *(vu_long *)MPC5XXX_SDRAM_CS1CFG & 0xFF;
+ if (dramsize2 >= 0x13) {
+ dramsize2 = (1 << (dramsize2 - 0x13)) << 20;
+ } else {
+ dramsize2 = 0;
+ }
+
+#endif /* CFG_RAMBOOT */
+
+ return dramsize + dramsize2;
+}
+
+//###CHD: sowas gibt es bei usn nicht!
+#elif defined(CONFIG_MGT5100)
+
+long int initdram (int board_type)
+{
+ ulong dramsize = 0;
+#ifndef CFG_RAMBOOT
+ ulong test1, test2;
+
+ /* setup and enable SDRAM chip selects */
+ *(vu_long *)MPC5XXX_SDRAM_START = 0x00000000;
+ *(vu_long *)MPC5XXX_SDRAM_STOP = 0x0000ffff;/* 2G */
+ *(vu_long *)MPC5XXX_ADDECR |= (1 << 22); /* Enable SDRAM */
+ __asm__ volatile ("sync");
+
+ /* setup config registers */
+ *(vu_long *)MPC5XXX_SDRAM_CONFIG1 = SDRAM_CONFIG1;
+ *(vu_long *)MPC5XXX_SDRAM_CONFIG2 = SDRAM_CONFIG2;
+
+ /* address select register */
+ *(vu_long *)MPC5XXX_SDRAM_XLBSEL = SDRAM_ADDRSEL;
+ __asm__ volatile ("sync");
+
+ /* find RAM size */
+ sdram_start(0);
+ test1 = get_ram_size((ulong *)CFG_SDRAM_BASE, 0x80000000);
+ sdram_start(1);
+ test2 = get_ram_size((ulong *)CFG_SDRAM_BASE, 0x80000000);
+ if (test1 > test2) {
+ sdram_start(0);
+ dramsize = test1;
+ } else {
+ dramsize = test2;
+ }
+
+ /* set SDRAM end address according to size */
+ *(vu_long *)MPC5XXX_SDRAM_STOP = ((dramsize - 1) >> 15);
+
+#else /* CFG_RAMBOOT */
+
+ /* Retrieve amount of SDRAM available */
+ dramsize = ((*(vu_long *)MPC5XXX_SDRAM_STOP + 1) << 15);
+
+#endif /* CFG_RAMBOOT */
+
+ return dramsize;
+}
+
+#else
+#error Neither CONFIG_MPC5200 or CONFIG_MGT5100 defined
+#endif
+
+int checkboard (void)
+{
+ puts("Board: Bluetechnix DevMPC5200Leica \n");
+/*
+#if defined(CONFIG_MPC5200)
+ puts ("Board: MicroSys PM520 \n");
+#elif defined(CONFIG_MGT5100)
+ puts ("Board: MicroSys PM510 \n");
+#endif*/
+ return 0;
+}
+
+void flash_preinit(void)
+{
+ /*
+ * Now, when we are in RAM, enable flash write
+ * access for detection process.
+ * Note that CS_BOOT cannot be cleared when
+ * executing in flash.
+ */
+#if defined(CONFIG_MGT5100)
+ *(vu_long *)MPC5XXX_ADDECR &= ~(1 << 25); /* disable CS_BOOT */
+ *(vu_long *)MPC5XXX_ADDECR |= (1 << 16); /* enable CS0 */
+#endif
+ *(vu_long *)MPC5XXX_BOOTCS_CFG &= ~0x1; /* clear RO */
+}
+
+void flash_afterinit(ulong start, ulong size)
+{
+#if defined(CONFIG_BOOT_ROM)
+ /* adjust mapping */
+ *(vu_long *)MPC5XXX_CS1_START =
+ START_REG(start);
+ *(vu_long *)MPC5XXX_CS1_STOP =
+ STOP_REG(start, size);
+#else
+ /* adjust mapping */
+ *(vu_long *)MPC5XXX_BOOTCS_START = *(vu_long *)MPC5XXX_CS0_START =
+ START_REG(start);
+ *(vu_long *)MPC5XXX_BOOTCS_STOP = *(vu_long *)MPC5XXX_CS0_STOP =
+ STOP_REG(start, size);
+#endif
+}
+
+
+extern flash_info_t flash_info[]; /* info for FLASH chips */
+
+int misc_init_r (void)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+ /* adjust flash start */
+ gd->bd->bi_flashstart = flash_info[0].start[0];
+ return (0);
+}
+
+#ifdef CONFIG_PCI
+static struct pci_controller hose;
+
+extern void pci_mpc5xxx_init(struct pci_controller *);
+
+void pci_init_board(void)
+{
+ pci_mpc5xxx_init(&hose);
+}
+#endif
+
+#if defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET)
+
+void init_ide_reset (void)
+{
+ debug ("init_ide_reset\n");
+
+}
+
+void ide_set_reset (int idereset)
+{
+ debug ("ide_reset(%d)\n", idereset);
+
+}
+#endif /* defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET) */
+
+#if (CONFIG_COMMANDS & CFG_CMD_DOC)
+extern void doc_probe (ulong physadr);
+void doc_init (void)
+{
+ doc_probe (CFG_DOC_BASE);
+}
+#endif
--- /dev/null
+/*
+ * (C) Copyright 2004
+ * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#define SDRAM_DDR 1 /* is DDR */
+
+#if defined(CONFIG_MPC5200)
+/* Settings for XLB = 132 MHz */
+#define SDRAM_MODE 0x018D0000
+#define SDRAM_EMODE 0x40090000
+#define SDRAM_CONTROL 0x714f0f00
+#define SDRAM_CONFIG1 0x73722930
+#define SDRAM_CONFIG2 0x47770000
+#define SDRAM_TAPDELAY 0x10000000
+
+#else
+#error CONFIG_MPC5200 not defined
+#endif
--- /dev/null
+/*
+ * (C) Copyright 2004
+ * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#define SDRAM_DDR 0 /* is SDR */
+
+#if defined(CONFIG_MPC5200)
+/* Settings for XLB = 132 MHz */
+#define SDRAM_MODE 0x00CD0000
+#define SDRAM_CONTROL 0x504F0000
+#define SDRAM_CONFIG1 0xD2322800
+#define SDRAM_CONFIG2 0x8AD70000
+
+#elif defined(CONFIG_MGT5100)
+/* Settings for XLB = 66 MHz */
+#define SDRAM_MODE 0x008D0000
+#define SDRAM_CONTROL 0x504F0000
+#define SDRAM_CONFIG1 0xC2222600
+#define SDRAM_CONFIG2 0x88B70004
+#define SDRAM_ADDRSEL 0x02000000
+
+#else
+#error Neither CONFIG_MPC5200 or CONFIG_MGT5100 defined
+#endif
--- /dev/null
+/*
+ * Configuration Registers for the MT48LC8M32B2 SDRAM on the MPC5200 platform
+ */
+
+#define SDRAM_DDR 0 /* is SDR */
+
+#if defined(CONFIG_MPC5200)
+/* Settings for XLB = 132 MHz */
+//#define SDRAM_MODE 0x00cc0000 // CL-3 BURST-8 -> Mode Register\97MBAR + 0x0100
+//#define SDRAM_CONTROL 0x501f0000 // Control Register\97MBAR + 0x0104
+//#define SDRAM_CONFIG1 0xe2329000 // Delays between commands -> Configuration Register 1\97MBAR + 0x0108
+//#define SDRAM_CONFIG2 0x46e70000 // Delays between commands -> Configuration Register 2\97MBAR + 0x010C
+
+//Christian
+//#define SDRAM_MODE 0x00cd0000 // CL-3 BURST-8 -> Mode Register\97MBAR + 0x0100
+//#define SDRAM_CONTROL 0x501f0000 // Control Register\97MBAR + 0x0104
+//#define SDRAM_CONFIG1 0xd2322900 // Delays between commands -> Configuration Register 1\97MBAR + 0x0108
+//#define SDRAM_CONFIG2 0x8ad70000 // Delays between commands -> Configuration Register 2\97MBAR + 0x010C
+
+//###CHD: ordentliche Doku dazu! CAS=2, etc.
+//STefan
+#define SDRAM_MODE 0x008d0000 // CL-3 BURST-8 -> Mode Register\97MBAR + 0x0100
+#define SDRAM_CONTROL 0x504f0000 // Control Register\97MBAR + 0x0104
+#define SDRAM_CONFIG1 0xc2222900 // Delays between commands -> Configuration Register 1\97MBAR + 0x0108
+#define SDRAM_CONFIG2 0x88c70000 // Delays between commands -> Configuration Register 2\97MBAR + 0x010C
+
+
+#else
+#error CONFIG_MPC5200 not defined, please set parameters for your sdram controller in mt48lc8m32b2.h
+#endif
--- /dev/null
+/*
+ * (C) Copyright 2003-2006
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+ __DYNAMIC = 0; */
+SECTIONS
+{
+ /* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
+ .plt : { *(.plt) }
+ .text :
+ {
+ cpu/mpc5xxx/start.o (.text)
+ *(.text)
+ *(.fixup)
+ *(.got1)
+ . = ALIGN(16);
+ *(.rodata)
+ *(.rodata1)
+ *(.rodata.str1.4)
+ *(.eh_frame)
+ }
+ .fini : { *(.fini) } =0
+ .ctors : { *(.ctors) }
+ .dtors : { *(.dtors) }
+
+ /* Read-write section, merged into data segment: */
+ . = (. + 0x0FFF) & 0xFFFFF000;
+ _erotext = .;
+ PROVIDE (erotext = .);
+ .reloc :
+ {
+ *(.got)
+ _GOT2_TABLE_ = .;
+ *(.got2)
+ _FIXUP_TABLE_ = .;
+ *(.fixup)
+ }
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
+ __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
+
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.sdata)
+ *(.sdata2)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ . = .;
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+
+ . = .;
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ . = ALIGN(4096);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(4096);
+ __init_end = .;
+
+ __bss_start = .;
+ .bss :
+ {
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ }
+ _end = . ;
+ PROVIDE (end = .);
+}
fec->rbdBase = (FEC_RBD *)(FEC_BD_BASE + FEC_TBD_NUM * sizeof(FEC_TBD));
#if defined(CONFIG_CANMB) || defined(CONFIG_HMI1001) || \
defined(CONFIG_ICECUBE) || defined(CONFIG_INKA4X0) || \
+ defined(CONFIG_MCC200) || defined(CONFIG_O2DNT) || \
defined(CONFIG_PM520) || defined(CONFIG_TOP5200) || \
- defined(CONFIG_TQM5200) || defined(CONFIG_O2DNT)
+ defined(CONFIG_TQM5200)
# ifndef CONFIG_FEC_10MBIT
fec->xcv_type = MII100;
# else
--- /dev/null
+/*
+ * (C) Copyright 2006
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+
+#define CONFIG_MPC5200
+#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */
+#define CONFIG_MCC200 1 /* ... on MCC200 board */
+
+#define CFG_MPC5XXX_CLKIN 33000000 /* ... running at 33MHz */
+
+#define CONFIG_MISC_INIT_R
+
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
+
+#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+#endif
+
+/*
+ * Serial console configuration
+ */
+#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */
+#define CONFIG_BAUDRATE 115200
+#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
+
+
+//###CHD: MPC5100 gibt es nicht -> weg damit!
+#ifdef CONFIG_MPC5200 /* MPC5100 PCI is not supported yet. */
+/*
+ * PCI Mapping:
+ * 0x40000000 - 0x4fffffff - PCI Memory
+ * 0x50000000 - 0x50ffffff - PCI IO Space
+ */
+//Wenn geht PCI raus!
+#define CONFIG_PCI 1
+#define CONFIG_PCI_PNP 1
+#define CONFIG_PCI_SCAN_SHOW 1
+#undef CONFIG_PCI_SCAN_SHOW
+
+#define CONFIG_PCI_MEM_BUS 0x40000000
+#define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS
+#define CONFIG_PCI_MEM_SIZE 0x10000000
+
+#define CONFIG_PCI_IO_BUS 0x50000000
+#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS
+#define CONFIG_PCI_IO_SIZE 0x01000000
+
+#define CONFIG_NET_MULTI 1
+#define CONFIG_MII 1
+#define CONFIG_EEPRO100 1
+#define CFG_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */
+#undef CONFIG_NS8382X
+
+#define ADD_PCI_CMD CFG_CMD_PCI
+
+#else /* MPC5100 */
+
+#define ADD_PCI_CMD 0 /* no CFG_CMD_PCI */
+
+#endif
+
+/* Partitions */
+#define CONFIG_DOS_PARTITION
+
+/* USB */
+#if 1
+#define CONFIG_USB_OHCI
+#define ADD_USB_CMD CFG_CMD_USB | CFG_CMD_FAT
+#define CONFIG_USB_STORAGE
+#else
+#define ADD_USB_CMD 0
+#endif
+
+//###CHD: BOOTROm raus!
+#if defined(CONFIG_BOOT_ROM)
+#define ADD_DOC_CMD 0
+#else
+#define ADD_DOC_CMD CFG_CMD_DOC
+#endif
+
+/*
+ * Supported commands
+ */
+#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
+ ADD_DOC_CMD | \
+ ADD_PCI_CMD | \
+ ADD_USB_CMD | \
+ CFG_CMD_BEDBUG | \
+ CFG_CMD_DATE | \
+ CFG_CMD_DHCP | \
+ CFG_CMD_EEPROM | \
+ CFG_CMD_FAT | \
+ CFG_CMD_I2C | \
+ CFG_CMD_IDE | \
+ CFG_CMD_NFS | \
+ CFG_CMD_SNTP )
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+/*
+ * Autobooting
+ */
+#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
+
+#define CONFIG_PREBOOT "echo;" \
+ "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
+ "echo"
+
+#undef CONFIG_BOOTARGS
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "netdev=eth0\0" \
+ "hostname=lmpc\0" \
+ "nfsargs=setenv bootargs root=/dev/nfs rw " \
+ "nfsroot=${serverip}:${rootpath}\0" \
+ "ramargs=setenv bootargs root=/dev/ram rw\0" \
+ "addip=setenv bootargs ${bootargs} " \
+ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
+ ":${hostname}:${netdev}:off panic=1\0" \
+ "flash_nfs=run nfsargs addip;" \
+ "bootm ${kernel_addr}\0" \
+ "flash_self=run ramargs addip;" \
+ "bootm ${kernel_addr} ${ramdisk_addr}\0" \
+ "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \
+ "rootpath=/opt/eldk30/ppc_82xx\0" \
+ "bootfile=/tftpboot/LMPC/uImage\0" \
+ "baudrate=115200\0" \
+ "serverip=192.168.0.1\0" \
+ "ipaddr=192.168.0.2\0" \
+ "ethaddr=00:02:44:7d:73:3b\0" \
+ ""
+
+#define CONFIG_BOOTCOMMAND "run flash_self"
+
+#if defined(CONFIG_MPC5200)
+/*
+ * IPB Bus clocking configuration.
+ */
+#undef CFG_IPBSPEED_133 /* define for 133MHz speed */
+#endif
+
+//###CHD: EEProm config RTC config sollte raus, gibt es nciht bei uns auf I2C!
+/*
+ * I2C configuration
+ */
+#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
+#define CFG_I2C_MODULE 2 /* Select I2C module #1 or #2 */
+
+#define CFG_I2C_SPEED 100000 /* 100 kHz */
+#define CFG_I2C_SLAVE 0x7F
+
+/*
+ * EEPROM configuration
+ */
+#define CFG_I2C_EEPROM_ADDR 0x58
+#define CFG_I2C_EEPROM_ADDR_LEN 1
+#define CFG_EEPROM_PAGE_WRITE_BITS 4
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
+
+/*
+ * RTC configuration
+ */
+#define CONFIG_RTC_PCF8563
+#define CFG_I2C_RTC_ADDR 0x51
+
+//###CHD: meiner Ansicht nach auch raus!
+/*
+ * Disk-On-Chip configuration
+ */
+
+#define CFG_DOC_SHORT_TIMEOUT
+#define CFG_MAX_DOC_DEVICE 1 /* Max number of DOC devices */
+
+#define CFG_DOC_SUPPORT_2000
+#define CFG_DOC_SUPPORT_MILLENNIUM
+#define CFG_DOC_BASE 0xE0000000
+#define CFG_DOC_SIZE 0x00100000
+
+//###CHD: BOOTROm raus!
+#if defined(CONFIG_BOOT_ROM)
+/*
+ * Flash configuration (8,16 or 32 MB)
+ * TEXT base always at 0xFFF00000
+ * ENV_ADDR always at 0xFFF40000
+ * FLASH_BASE at 0xFC000000 for 32 MB
+ * 0xFD000000 for 16 MB
+ * 0xFD800000 for 8 MB
+ */
+#define CFG_FLASH_BASE 0xfc000000
+#define CFG_FLASH_SIZE 0x02000000
+#define CFG_BOOTROM_BASE 0xFFF00000
+#define CFG_BOOTROM_SIZE 0x00080000
+#define CFG_ENV_ADDR (0xFDF00000 + 0x40000)
+#else
+/*
+ * Flash configuration (8,16 or 32 MB)
+ * TEXT base always at 0xFFF00000
+ * ENV_ADDR always at 0xFFF40000
+ * FLASH_BASE at 0xFE000000 for 32 MB
+ * 0xFF000000 for 16 MB
+ * 0xFF800000 for 8 MB
+ */
+#define CFG_FLASH_BASE 0xfe000000
+#define CFG_FLASH_SIZE 0x02000000
+#define CFG_ENV_ADDR (0xFFF00000 + 0x40000)
+#endif
+#define CFG_MAX_FLASH_BANKS 1 /* max num of memory banks */
+
+#define CFG_MAX_FLASH_SECT 128 /* max num of sects on one chip */
+
+#define CFG_FLASH_ERASE_TOUT 240000 /* Flash Erase Timeout (in ms) */
+#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */
+#define CFG_FLASH_LOCK_TOUT 5 /* Timeout for Flash Set Lock Bit (in ms) */
+#define CFG_FLASH_UNLOCK_TOUT 10000 /* Timeout for Flash Clear Lock Bits (in ms) */
+#define CFG_FLASH_PROTECTION /* "Real" (hardware) sectors protection */
+
+#define PHYS_FLASH_SECT_SIZE 0x00040000 /* 256 KB sectors (x2) */
+
+#undef CONFIG_FLASH_16BIT /* Flash is 32-bit */
+
+
+/*
+ * Environment settings
+ */
+#define CFG_ENV_IS_IN_FLASH 1
+#define CFG_ENV_SIZE 0x10000
+#define CFG_ENV_SECT_SIZE 0x40000
+#define CONFIG_ENV_OVERWRITE 1
+
+/*
+ * Memory map
+ */
+#define CFG_MBAR 0xf0000000
+#define CFG_SDRAM_BASE 0x00000000
+#define CFG_DEFAULT_MBAR 0x80000000
+
+/* Use SRAM until RAM will be available */
+#define CFG_INIT_RAM_ADDR MPC5XXX_SRAM
+#define CFG_INIT_RAM_END MPC5XXX_SRAM_SIZE /* End of used area in DPRAM */
+
+
+#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+
+#define CFG_MONITOR_BASE TEXT_BASE
+#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
+# define CFG_RAMBOOT 1
+#endif
+
+#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
+#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+
+/*
+ * Ethernet configuration
+ */
+#define CONFIG_MPC5xxx_FEC 1
+/*
+ * Define CONFIG_FEC_10MBIT to force FEC at 10Mb
+ */
+/* #define CONFIG_FEC_10MBIT 1 */
+#define CONFIG_PHY_ADDR 0x00
+
+/*
+ * GPIO configuration
+ */
+//###CHD: MSB = 1 -> 64MB: funktioniert nicht: ERRATA - BUG?
+//###CHD: 0x10000004 = 32MB SDRAM
+//###CHD: 0x90000004 = 64MB SDRAM
+#define CFG_GPS_PORT_CONFIG 0x10000004
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+
+#define CFG_MEMTEST_START 0x00100000 /* memtest works on */
+#define CFG_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */
+
+#define CFG_LOAD_ADDR 0x100000 /* default load address */
+
+#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
+
+/*
+ * Various low-level settings
+ */
+#if defined(CONFIG_MPC5200)
+#define CFG_HID0_INIT HID0_ICE | HID0_ICFI
+#define CFG_HID0_FINAL HID0_ICE
+#else
+#define CFG_HID0_INIT 0
+#define CFG_HID0_FINAL 0
+#endif
+
+//###CHD: hier sollte das BOOT_ROM raus!
+#if defined(CONFIG_BOOT_ROM)
+#define CFG_BOOTCS_START CFG_BOOTROM_BASE
+#define CFG_BOOTCS_SIZE CFG_BOOTROM_SIZE
+#define CFG_BOOTCS_CFG 0x00047800
+#define CFG_CS0_START CFG_BOOTROM_BASE
+#define CFG_CS0_SIZE CFG_BOOTROM_SIZE
+#define CFG_CS1_START CFG_FLASH_BASE
+#define CFG_CS1_SIZE CFG_FLASH_SIZE
+#define CFG_CS1_CFG 0x0004fb00
+#else
+#define CFG_BOOTCS_START CFG_FLASH_BASE
+#define CFG_BOOTCS_SIZE CFG_FLASH_SIZE
+#define CFG_BOOTCS_CFG 0x0004fb00
+#define CFG_CS0_START CFG_FLASH_BASE
+#define CFG_CS0_SIZE CFG_FLASH_SIZE
+#define CFG_CS1_START CFG_DOC_BASE
+#define CFG_CS1_SIZE CFG_DOC_SIZE
+#define CFG_CS1_CFG 0x00047800
+#endif
+
+#define CFG_CS_BURST 0x00000000
+#define CFG_CS_DEADCYCLE 0x33333333
+
+#define CFG_RESET_ADDRESS 0xff000000
+
+/*-----------------------------------------------------------------------
+ * USB stuff
+ *-----------------------------------------------------------------------
+ */
+#define CONFIG_USB_CLOCK 0x0001BBBB
+#define CONFIG_USB_CONFIG 0x00005000
+
+/*-----------------------------------------------------------------------
+ * IDE/ATA stuff Supports IDE harddisk
+ *-----------------------------------------------------------------------
+ */
+
+//###CHD: eigentlich das ganze IDE zeugs raus (IDE wird derzeit nciht mehr gescannt!)
+#undef CONFIG_IDE_8xx_PCCARD /* Use IDE with PC Card Adapter */
+
+#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */
+#undef CONFIG_IDE_LED /* LED for ide not supported */
+
+#undef CONFIG_IDE_RESET /* reset for ide supported */
+#define CONFIG_IDE_PREINIT
+#undef CONFIG_IDE_PREINIT
+
+#define CFG_IDE_MAXBUS 0 /* max. 1 IDE bus */
+#define CFG_IDE_MAXDEVICE 2 /* max. 2 drive per IDE bus */
+
+#define CFG_ATA_IDE0_OFFSET 0x0000
+
+#define CFG_ATA_BASE_ADDR MPC5XXX_ATA
+
+/* Offset for data I/O */
+#define CFG_ATA_DATA_OFFSET (0x0060)
+
+/* Offset for normal register accesses */
+#define CFG_ATA_REG_OFFSET (CFG_ATA_DATA_OFFSET)
+
+/* Offset for alternate registers */
+#define CFG_ATA_ALT_OFFSET (0x005C)
+
+/* Interval between registers */
+#define CFG_ATA_STRIDE 4
+
+#endif /* __CONFIG_H */
projects / u-boot.git / commitdiff