]> git.dujemihanovic.xyz Git - u-boot.git/commitdiff
mtd: denali: add Denali NAND driver for SPL
authorMasahiro Yamada <yamada.m@jp.panasonic.com>
Fri, 3 Oct 2014 10:21:04 +0000 (19:21 +0900)
committerMasahiro Yamada <yamada.m@jp.panasonic.com>
Sun, 5 Oct 2014 05:10:09 +0000 (14:10 +0900)
The SPL-mode driver for Denali(Cadence) NAND Flash Memory Controller IP.

This driver requires two CONFIG macros:
 - CONFIG_SPL_NAND_DENALI
     Define to enable this driver.
 - CONFIG_SYS_NAND_BAD_BLOCK_POS
     Specify bad block mark position in the oob space. Typically 0.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Chin Liang See <clsee@altera.com>
Cc: Scott Wood <scottwood@freescale.com>
drivers/mtd/nand/Kconfig
drivers/mtd/nand/Makefile
drivers/mtd/nand/denali_spl.c [new file with mode: 0644]

index 1d9bf4802caef5fc6c6b484b5303d3d8b2ddb2ea..75c2c065c891e42028d0ce6fea80785f6e28b6d4 100644 (file)
@@ -29,4 +29,14 @@ config NAND_DENALI_SPARE_AREA_SKIP_BYTES
 
 endif
 
+if SPL_BUILD
+
+config SPL_NAND_DENALI
+       bool "Support Denali NAND controller for SPL"
+       help
+         This is a small implementation of the Denali NAND controller
+         for use on SPL.
+
+endif
+
 endmenu
index f298f8434a4d53acbbc59baae25012b1dcc9c7cc..47eb34f9c537c4f1568aa2bfee7191e3962db125 100644 (file)
@@ -12,6 +12,7 @@ NORMAL_DRIVERS=y
 endif
 
 obj-$(CONFIG_SPL_NAND_AM33XX_BCH) += am335x_spl_bch.o
+obj-$(CONFIG_SPL_NAND_DENALI) += denali_spl.o
 obj-$(CONFIG_SPL_NAND_DOCG4) += docg4_spl.o
 obj-$(CONFIG_SPL_NAND_SIMPLE) += nand_spl_simple.o
 obj-$(CONFIG_SPL_NAND_LOAD) += nand_spl_load.o
diff --git a/drivers/mtd/nand/denali_spl.c b/drivers/mtd/nand/denali_spl.c
new file mode 100644 (file)
index 0000000..65fdde8
--- /dev/null
@@ -0,0 +1,231 @@
+/*
+ * Copyright (C) 2014       Panasonic Corporation
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/unaligned.h>
+#include <linux/mtd/nand.h>
+#include "denali.h"
+
+#define SPARE_ACCESS           0x41
+#define MAIN_ACCESS            0x42
+#define PIPELINE_ACCESS                0x2000
+
+#define BANK(x) ((x) << 24)
+
+static void __iomem *denali_flash_mem =
+                       (void __iomem *)CONFIG_SYS_NAND_DATA_BASE;
+static void __iomem *denali_flash_reg =
+                       (void __iomem *)CONFIG_SYS_NAND_REGS_BASE;
+
+static const int flash_bank;
+static uint8_t page_buffer[NAND_MAX_PAGESIZE];
+static int page_size, oob_size, pages_per_block;
+
+static void index_addr(uint32_t address, uint32_t data)
+{
+       writel(address, denali_flash_mem + INDEX_CTRL_REG);
+       writel(data, denali_flash_mem + INDEX_DATA_REG);
+}
+
+static int wait_for_irq(uint32_t irq_mask)
+{
+       unsigned long timeout = 1000000;
+       uint32_t intr_status;
+
+       do {
+               intr_status = readl(denali_flash_reg + INTR_STATUS(flash_bank));
+
+               if (intr_status & INTR_STATUS__ECC_UNCOR_ERR) {
+                       debug("Uncorrected ECC detected\n");
+                       return -EIO;
+               }
+
+               if (intr_status & irq_mask)
+                       break;
+
+               udelay(1);
+               timeout--;
+       } while (timeout);
+
+       if (!timeout) {
+               debug("Timeout with interrupt status %08x\n", intr_status);
+               return -EIO;
+       }
+
+       return 0;
+}
+
+static void read_data_from_flash_mem(uint8_t *buf, int len)
+{
+       int i;
+       uint32_t *buf32;
+
+       /* transfer the data from the flash */
+       buf32 = (uint32_t *)buf;
+
+       /*
+        * Let's take care of unaligned access although it rarely happens.
+        * Avoid put_unaligned() for the normal use cases since it leads to
+        * a bit performance regression.
+        */
+       if ((unsigned long)buf32 % 4) {
+               for (i = 0; i < len / 4; i++)
+                       put_unaligned(readl(denali_flash_mem + INDEX_DATA_REG),
+                                     buf32++);
+       } else {
+               for (i = 0; i < len / 4; i++)
+                       *buf32++ = readl(denali_flash_mem + INDEX_DATA_REG);
+       }
+
+       if (len % 4) {
+               u32 tmp;
+
+               tmp = cpu_to_le32(readl(denali_flash_mem + INDEX_DATA_REG));
+               buf = (uint8_t *)buf32;
+               for (i = 0; i < len % 4; i++) {
+                       *buf++ = tmp;
+                       tmp >>= 8;
+               }
+       }
+}
+
+int denali_send_pipeline_cmd(int page, int ecc_en, int access_type)
+{
+       uint32_t addr, cmd;
+       static uint32_t page_count = 1;
+
+       writel(ecc_en, denali_flash_reg + ECC_ENABLE);
+
+       /* clear all bits of intr_status. */
+       writel(0xffff, denali_flash_reg + INTR_STATUS(flash_bank));
+
+       addr = BANK(flash_bank) | page;
+
+       /* setup the acccess type */
+       cmd = MODE_10 | addr;
+       index_addr(cmd, access_type);
+
+       /* setup the pipeline command */
+       index_addr(cmd, PIPELINE_ACCESS | page_count);
+
+       cmd = MODE_01 | addr;
+       writel(cmd, denali_flash_mem + INDEX_CTRL_REG);
+
+       return wait_for_irq(INTR_STATUS__LOAD_COMP);
+}
+
+static int nand_read_oob(void *buf, int page)
+{
+       int ret;
+
+       ret = denali_send_pipeline_cmd(page, 0, SPARE_ACCESS);
+       if (ret < 0)
+               return ret;
+
+       read_data_from_flash_mem(buf, oob_size);
+
+       return 0;
+}
+
+static int nand_read_page(void *buf, int page)
+{
+       int ret;
+
+       ret = denali_send_pipeline_cmd(page, 1, MAIN_ACCESS);
+       if (ret < 0)
+               return ret;
+
+       read_data_from_flash_mem(buf, page_size);
+
+       return 0;
+}
+
+static int nand_block_isbad(int block)
+{
+       int ret;
+
+       ret = nand_read_oob(page_buffer, block * pages_per_block);
+       if (ret < 0)
+               return ret;
+
+       return page_buffer[CONFIG_SYS_NAND_BAD_BLOCK_POS] != 0xff;
+}
+
+/* nand_init() - initialize data to make nand usable by SPL */
+void nand_init(void)
+{
+       /* access to main area */
+       writel(0, denali_flash_reg + TRANSFER_SPARE_REG);
+
+       /*
+        * These registers are expected to be already set by the hardware
+        * or earlier boot code.  So we read these values out.
+        */
+       page_size = readl(denali_flash_reg + DEVICE_MAIN_AREA_SIZE);
+       oob_size = readl(denali_flash_reg + DEVICE_SPARE_AREA_SIZE);
+       pages_per_block = readl(denali_flash_reg + PAGES_PER_BLOCK);
+}
+
+int nand_spl_load_image(uint32_t offs, unsigned int size, void *dst)
+{
+       int block, page, column, readlen;
+       int ret;
+       int force_bad_block_check = 1;
+
+       page = offs / page_size;
+       column = offs % page_size;
+
+       block = page / pages_per_block;
+       page = page % pages_per_block;
+
+       while (size) {
+               if (force_bad_block_check || page == 0) {
+                       ret = nand_block_isbad(block);
+                       if (ret < 0)
+                               return ret;
+
+                       if (ret) {
+                               block++;
+                               continue;
+                       }
+               }
+
+               force_bad_block_check = 0;
+
+               if (unlikely(column || size < page_size)) {
+                       /* Partial page read */
+                       ret = nand_read_page(page_buffer,
+                                            block * pages_per_block + page);
+                       if (ret < 0)
+                               return ret;
+
+                       readlen = min(page_size - column, size);
+                       memcpy(dst, page_buffer, readlen);
+
+                       column = 0;
+               } else {
+                       ret = nand_read_page(dst,
+                                            block * pages_per_block + page);
+                       if (ret < 0)
+                               return ret;
+
+                       readlen = page_size;
+               }
+
+               size -= readlen;
+               dst += readlen;
+               page++;
+               if (page == pages_per_block) {
+                       block++;
+                       page = 0;
+               }
+       }
+
+       return 0;
+}
+
+void nand_deselect(void) {}