mtd: spi: Add flash property for Micron mt25qu512a

mt25qu512a is rebranded after its spinoff from STM, so it is
different only in term of extended jedec ID, initial JEDEC id
is same as that of n25q512a.In order to avoid any confussion
with respect to name new entry is added.

This flash is tested for Single I/O mode on LS1046FRWY although
it also support QUAD I/O.

Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>

diff --git a/drivers/mtd/spi/spi-nor-ids.c b/drivers/mtd/spi/spi-nor-ids.c
index ec929760eee4768522bed3f564128b4963c717ea..d99c4c5b1437a34aa622c12c8037a0464b255034 100644 (file)
--- a/drivers/mtd/spi/spi-nor-ids.c
+++ b/drivers/mtd/spi/spi-nor-ids.c
@@ -163,6 +163,8 @@ const struct flash_info spi_nor_ids[] = {
        { INFO("n25q128a13",  0x20ba18, 0, 64 * 1024,  256, SECT_4K | SPI_NOR_QUAD_READ) },
        { INFO("n25q256a",    0x20ba19, 0, 64 * 1024,  512, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
        { INFO("n25q256ax1",  0x20bb19, 0, 64 * 1024,  512, SECT_4K | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
+       { INFO6("mt25qu512a",  0x20bb20, 0x104400, 64 * 1024, 1024,
+                SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
        { INFO("n25q512a",    0x20bb20, 0, 64 * 1024, 1024, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
        { INFO("n25q512ax3",  0x20ba20, 0, 64 * 1024, 1024, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
        { INFO("n25q00",      0x20ba21, 0, 64 * 1024, 2048, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ | NO_CHIP_ERASE) },