Sync the rk3399 DTs and associated bits from 5.14-rc1.
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
(Remove the conflict content for vmarc-som)
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
model = "Rockchip RK3399 Evaluation Board";
compatible = "rockchip,rk3399-evb", "rockchip,rk3399";
+ aliases {
+ mmc0 = &sdhci;
+ };
+
backlight: backlight {
compatible = "pwm-backlight";
brightness-levels = <
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
- pinctrl-0 = <&user_led1>, <&user_led2>, <&user_led3>,
- <&user_led4>, <&wlan_led>, <&bt_led>;
+ pinctrl-0 = <&user_led1_pin>, <&user_led2_pin>,
+ <&user_led3_pin>, <&user_led4_pin>,
+ <&wlan_led_pin>, <&bt_led_pin>;
- user_led1 {
+ user_led1: led-1 {
label = "red:user1";
gpios = <&gpio4 25 0>;
linux,default-trigger = "heartbeat";
};
- user_led2 {
+ user_led2: led-2 {
label = "red:user2";
gpios = <&gpio4 26 0>;
linux,default-trigger = "mmc0";
};
- user_led3 {
+ user_led3: led-3 {
label = "red:user3";
gpios = <&gpio4 30 0>;
linux,default-trigger = "mmc1";
};
- user_led4 {
+ user_led4: led-4 {
label = "red:user4";
gpios = <&gpio1 0 0>;
panic-indicator;
linux,default-trigger = "none";
};
- wlan_active_led {
+ wlan_active_led: led-5 {
label = "red:wlan";
gpios = <&gpio1 1 0>;
linux,default-trigger = "phy0tx";
default-state = "off";
};
- bt_active_led {
+ bt_active_led: led-6 {
label = "red:bt";
gpios = <&gpio1 4 0>;
linux,default-trigger = "hci0-power";
};
leds {
- user_led1: user_led1 {
+ user_led1_pin: user-led1-pin {
rockchip,pins =
<4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
};
- user_led2: user_led2 {
+ user_led2_pin: user-led2-pin {
rockchip,pins =
<4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
};
- user_led3: user_led3 {
+ user_led3_pin: user-led3-pin {
rockchip,pins =
<4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
};
- user_led4: user_led4 {
+ user_led4_pin: user-led4-pin {
rockchip,pins =
<1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
};
- wlan_led: wlan_led {
+ wlan_led_pin: wlan-led-pin {
rockchip,pins =
<1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
};
- bt_led: bt_led {
+ bt_led_pin: bt-led-pin {
rockchip,pins =
<1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
};
/dts-v1/;
#include <dt-bindings/input/linux-event-codes.h>
#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/usb/pd.h>
#include "rk3399.dtsi"
#include "rk3399-opp.dtsi"
model = "Firefly-RK3399 Board";
compatible = "firefly,firefly-rk3399", "rockchip,rk3399";
+ aliases {
+ mmc0 = &sdio0;
+ mmc1 = &sdmmc;
+ mmc2 = &sdhci;
+ };
+
chosen {
stdout-path = "serial2:1500000n8";
};
};
};
+ ir-receiver {
+ compatible = "gpio-ir-receiver";
+ gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>;
+ pinctrl-0 = <&ir_int>;
+ pinctrl-names = "default";
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
- pinctrl-0 = <&work_led_gpio>, <&diy_led_gpio>;
+ pinctrl-0 = <&work_led_pin>, <&diy_led_pin>;
- work-led {
+ work_led: led-0 {
label = "work";
default-state = "on";
gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
};
- diy-led {
+ diy_led: led-1 {
label = "diy";
default-state = "off";
gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
};
+ sound-dit {
+ compatible = "audio-graph-card";
+ label = "SPDIF";
+ dais = <&spdif_p0>;
+ };
+
+ spdif-dit {
+ compatible = "linux,spdif-dit";
+ #sound-dai-cells = <0>;
+
+ port {
+ dit_p0_0: endpoint {
+ remote-endpoint = <&spdif_p0_0>;
+ };
+ };
+ };
+
/* switched by pmic_sleep */
vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
compatible = "regulator-fixed";
vin-supply = <&vcc_sys>;
};
+ vcc5v0_typec: vcc5v0-typec-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vcc5v0_typec_en>;
+ regulator-name = "vcc5v0_typec";
+ regulator-always-on;
+ vin-supply = <&vcc_sys>;
+ };
+
vcc_sys: vcc-sys {
compatible = "regulator-fixed";
regulator-name = "vcc_sys";
i2c-scl-falling-time-ns = <20>;
status = "okay";
+ fusb0: typec-portc@22 {
+ compatible = "fcs,fusb302";
+ reg = <0x22>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&fusb0_int>;
+ vbus-supply = <&vcc5v0_typec>;
+ status = "okay";
+
+ connector {
+ compatible = "usb-c-connector";
+ data-role = "host";
+ label = "USB-C";
+ op-sink-microwatt = <1000000>;
+ power-role = "dual";
+ sink-pdos =
+ <PDO_FIXED(5000, 2500, PDO_FIXED_USB_COMM)>;
+ source-pdos =
+ <PDO_FIXED(5000, 1400, PDO_FIXED_USB_COMM)>;
+ try-power-role = "sink";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ usbc_hs: endpoint {
+ remote-endpoint =
+ <&u2phy0_typec_hs>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ usbc_ss: endpoint {
+ remote-endpoint =
+ <&tcphy0_typec_ss>;
+ };
+ };
+ };
+ };
+ };
+
accelerometer@68 {
compatible = "invensense,mpu6500";
reg = <0x68>;
};
};
+ fusb302x {
+ fusb0_int: fusb0-int {
+ rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ ir {
+ ir_int: ir-int {
+ rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
lcd-panel {
lcd_panel_reset: lcd-panel-reset {
rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
+ leds {
+ work_led_pin: work-led-pin {
+ rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ diy_led_pin: diy-led-pin {
+ rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
pcie {
pcie_pwr_en: pcie-pwr-en {
rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
};
pmic {
- vsel1_gpio: vsel1-gpio {
- rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
+ pmic_int_l: pmic-int-l {
+ rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
};
- vsel2_gpio: vsel2-gpio {
- rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
+ vsel1_pin: vsel1-pin {
+ rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
};
- };
- sdio-pwrseq {
- wifi_enable_h: wifi-enable-h {
- rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+ vsel2_pin: vsel2-pin {
+ rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
};
};
};
};
- pmic {
- pmic_int_l: pmic-int-l {
- rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
+ sdio-pwrseq {
+ wifi_enable_h: wifi-enable-h {
+ rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ usb-typec {
+ vcc5v0_typec_en: vcc5v0_typec_en {
+ rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
-
- leds {
- work_led_gpio: work_led-gpio {
- rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
- };
-
- diy_led_gpio: diy_led-gpio {
- rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
};
&pwm0 {
status = "okay";
};
+&spdif {
+ pinctrl-0 = <&spdif_bus_1>;
+ status = "okay";
+
+ spdif_p0: port {
+ spdif_p0_0: endpoint {
+ remote-endpoint = <&dit_p0_0>;
+ };
+ };
+};
+
&tcphy0 {
status = "okay";
};
+&tcphy0_usb3 {
+ port {
+ tcphy0_typec_ss: endpoint {
+ remote-endpoint = <&usbc_ss>;
+ };
+ };
+};
+
&tcphy1 {
status = "okay";
};
phy-supply = <&vcc5v0_host>;
status = "okay";
};
+
+ port {
+ u2phy0_typec_hs: endpoint {
+ remote-endpoint = <&usbc_hs>;
+ };
+ };
};
&u2phy1 {
#include "rk3399-op1-opp.dtsi"
/ {
+ aliases {
+ mmc0 = &sdmmc;
+ mmc1 = &sdhci;
+ };
+
chosen {
stdout-path = "serial2:115200n8";
};
enable-active-high;
enable-gpio = <&gpio2 2 GPIO_ACTIVE_HIGH>;
gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>;
- states = <1800000 0x1
- 3000000 0x0>;
+ states = <1800000 0x1>,
+ <3000000 0x0>;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3000000>;
cpu-supply = <&ppvar_bigcpu>;
};
+
&cru {
assigned-clocks =
<&cru PLL_GPLL>, <&cru PLL_CPLL>,
* configured as SDMMC and not JTAG.
*/
pinctrl-names = "default";
- pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_cd_gpio
+ pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_cd_pin
&sdmmc_bus4>;
bus-width = <4>;
};
/* This is where we actually hook up CD; has external pull */
- sdmmc_cd_gpio: sdmmc-cd-gpio {
+ sdmmc_cd_pin: sdmmc-cd-pin {
rockchip,pins = <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
#include "rk3399-opp.dtsi"
/ {
+ aliases {
+ mmc0 = &sdio0;
+ mmc1 = &sdmmc;
+ mmc2 = &sdhci;
+ };
+
chosen {
stdout-path = "serial2:1500000n8";
};
};
};
+ ir-receiver {
+ compatible = "gpio-ir-receiver";
+ gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_LOW>;
+ linux,rc-map-name = "rc-khadas";
+ pinctrl-names = "default";
+ pinctrl-0 = <&ir_rx>;
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
- pinctrl-0 = <&sys_led_gpio>, <&user_led_gpio>;
+ pinctrl-0 = <&sys_led_pin>, <&user_led_pin>;
- sys-led {
+ sys_led: led-0 {
label = "sys_led";
linux,default-trigger = "heartbeat";
gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
};
- user-led {
+ user_led: led-1 {
label = "user_led";
default-state = "off";
gpios = <&gpio4 RK_PD0 GPIO_ACTIVE_HIGH>;
};
};
+ ir {
+ ir_rx: ir-rx {
+ rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
leds {
- sys_led_gpio: sys_led-gpio {
+ sys_led_pin: sys-led-pin {
rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
};
- user_led_gpio: user_led-gpio {
+ user_led_pin: user-led-pin {
rockchip,pins = <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
status = "okay";
};
+&spi1 {
+ status = "okay";
+
+ spiflash: flash@0 {
+ compatible = "winbond,w25q128fw", "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <104000000>;
+ };
+};
+
&tcphy0 {
status = "okay";
};
model = "Leez RK3399 P710";
compatible = "leez,p710", "rockchip,rk3399";
+ aliases {
+ mmc0 = &sdio0;
+ mmc1 = &sdmmc;
+ mmc2 = &sdhci;
+ };
+
chosen {
stdout-path = "serial2:1500000n8";
};
reg = <0x40>;
fcs,suspend-voltage-selector = <1>;
pinctrl-names = "default";
- pinctrl-0 = <&vsel1_gpio>;
+ pinctrl-0 = <&vsel1_pin>;
regulator-name = "vdd_cpu_b";
regulator-min-microvolt = <712500>;
regulator-max-microvolt = <1500000>;
reg = <0x41>;
fcs,suspend-voltage-selector = <1>;
pinctrl-names = "default";
- pinctrl-0 = <&vsel2_gpio>;
+ pinctrl-0 = <&vsel2_pin>;
regulator-name = "vdd_gpu";
regulator-min-microvolt = <712500>;
regulator-max-microvolt = <1500000>;
rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
};
- vsel1_gpio: vsel1-gpio {
+ vsel1_pin: vsel1-pin {
rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
};
- vsel2_gpio: vsel2-gpio {
+ vsel2_pin: vsel2-pin {
rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
};
};
};
&pcie0 {
+ ep-gpios = <&gpio2 RK_PA4 GPIO_ACTIVE_HIGH>;
num-lanes = <4>;
vpcie3v3-supply = <&vcc3v3_sys>;
};
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
- * Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd
+ * FriendlyElec NanoPC-T4 board device tree source
*
- * Copyright (c) 2018 FriendlyElec Computer Tech. Co., Ltd.
+ * Copyright (c) 2020 FriendlyElec Computer Tech. Co., Ltd.
* (http://www.friendlyarm.com)
*
* Copyright (c) 2018 Collabora Ltd.
- * Copyright (c) 2019 Arm Ltd.
- * Copyright (C) 2020 Xiaobo <peterwillcn@gmail.com>
+ *
+ * Copyright (c) 2020 Jensen Huang <jensenhuang@friendlyarm.com>
+ * Copyright (c) 2020 Marty Jones <mj8263788@gmail.com>
+ * Copyright (c) 2021 Tianling Shen <cnsztl@gmail.com>
*/
/dts-v1/;
model = "FriendlyElec NanoPi R4S";
compatible = "friendlyarm,nanopi-r4s", "rockchip,rk3399";
- vdd_5v: vdd-5v {
- compatible = "regulator-fixed";
- regulator-name = "vdd_5v";
- regulator-always-on;
- regulator-boot-on;
- };
+ /delete-node/ display-subsystem;
- fan: pwm-fan {
- compatible = "pwm-fan";
- cooling-levels = <0 12 18 255>;
- #cooling-cells = <2>;
- fan-supply = <&vdd_5v>;
- pwms = <&pwm1 0 50000 0>;
- };
-};
+ gpio-leds {
+ pinctrl-0 = <&lan_led_pin>, <&sys_led_pin>, <&wan_led_pin>;
-&cpu_thermal {
- trips {
- cpu_warm: cpu_warm {
- temperature = <55000>;
- hysteresis = <2000>;
- type = "active";
- };
+ /delete-node/ led-0;
- cpu_hot: cpu_hot {
- temperature = <65000>;
- hysteresis = <2000>;
- type = "active";
+ lan_led: led-lan {
+ gpios = <&gpio1 RK_PA1 GPIO_ACTIVE_HIGH>;
+ label = "green:lan";
};
- };
- cooling-maps {
- map2 {
- trip = <&cpu_warm>;
- cooling-device = <&fan THERMAL_NO_LIMIT 1>;
+ sys_led: led-sys {
+ gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
+ label = "red:power";
+ default-state = "on";
};
- map3 {
- trip = <&cpu_hot>;
- cooling-device = <&fan 2 THERMAL_NO_LIMIT>;
+ wan_led: led-wan {
+ gpios = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>;
+ label = "green:wan";
};
};
-};
-&emmc_phy {
- status = "disabled";
-};
+ gpio-keys {
+ pinctrl-0 = <&reset_button_pin>;
-&fusb0 {
- status = "disabled";
-};
+ /delete-node/ power;
-&leds {
- lan_led: led-1 {
- gpios = <&gpio1 RK_PA1 GPIO_ACTIVE_HIGH>;
- label = "green:lan";
+ reset {
+ debounce-interval = <50>;
+ gpios = <&gpio1 RK_PC6 GPIO_ACTIVE_LOW>;
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ };
};
- wan_led: led-2 {
- gpios = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>;
- label = "green:wan";
+ vdd_5v: vdd-5v {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_5v";
+ regulator-always-on;
+ regulator-boot-on;
};
};
-&leds_gpio {
- rockchip,pins =
- <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>,
- <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
+&emmc_phy {
+ status = "disabled";
+};
+
+&i2c4 {
+ status = "disabled";
};
&pcie0 {
vpcie3v3-supply = <&vcc3v3_sys>;
};
+&pinctrl {
+ gpio-leds {
+ /delete-node/ status-led-pin;
+
+ lan_led_pin: lan-led-pin {
+ rockchip,pins = <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ sys_led_pin: sys-led-pin {
+ rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ wan_led_pin: wan-led-pin {
+ rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ rockchip-key {
+ /delete-node/ power-key;
+
+ reset_button_pin: reset-button-pin {
+ rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+};
+
&sdhci {
status = "disabled";
};
status = "disabled";
};
+&uart0 {
+ status = "disabled";
+};
+
&usbdrd_dwc3_0 {
dr_mode = "host";
};
#include "rk3399-opp.dtsi"
/ {
+ aliases {
+ mmc0 = &sdio0;
+ mmc1 = &sdmmc;
+ mmc2 = &sdhci;
+ };
+
chosen {
stdout-path = "serial2:1500000n8";
};
leds: gpio-leds {
compatible = "gpio-leds";
pinctrl-names = "default";
- pinctrl-0 = <&leds_gpio>;
+ pinctrl-0 = <&status_led_pin>;
- status {
+ status_led: led-0 {
gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
label = "status_led";
linux,default-trigger = "heartbeat";
#address-cells = <1>;
#size-cells = <0>;
- rtl8211e: phy@1 {
+ rtl8211e: ethernet-phy@1 {
reg = <1>;
interrupt-parent = <&gpio3>;
interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>;
};
&pcie0 {
- ep-gpios = <&gpio2 RK_PA4 GPIO_ACTIVE_HIGH>;
- max-link-speed = <2>;
num-lanes = <2>;
vpcie0v9-supply = <&vcca0v9_s3>;
vpcie1v8-supply = <&vcca1v8_s3>;
};
gpio-leds {
- leds_gpio: leds-gpio {
+ status_led_pin: status-led-pin {
rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
- phy {
+ gmac {
phy_intb: phy-intb {
rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
};
opp00 {
opp-hz = /bits/ 64 <408000000>;
- opp-microvolt = <800000>;
+ opp-microvolt = <825000 825000 1250000>;
clock-latency-ns = <40000>;
};
opp01 {
opp-hz = /bits/ 64 <600000000>;
- opp-microvolt = <800000>;
+ opp-microvolt = <825000 825000 1250000>;
};
opp02 {
opp-hz = /bits/ 64 <816000000>;
- opp-microvolt = <850000>;
+ opp-microvolt = <850000 850000 1250000>;
};
opp03 {
opp-hz = /bits/ 64 <1008000000>;
- opp-microvolt = <925000>;
+ opp-microvolt = <925000 925000 1250000>;
};
opp04 {
opp-hz = /bits/ 64 <1200000000>;
- opp-microvolt = <1000000>;
+ opp-microvolt = <1000000 1000000 1250000>;
};
opp05 {
opp-hz = /bits/ 64 <1416000000>;
- opp-microvolt = <1125000>;
+ opp-microvolt = <1125000 1125000 1250000>;
};
};
opp00 {
opp-hz = /bits/ 64 <408000000>;
- opp-microvolt = <800000>;
+ opp-microvolt = <825000 825000 1250000>;
clock-latency-ns = <40000>;
};
opp01 {
opp-hz = /bits/ 64 <600000000>;
- opp-microvolt = <800000>;
+ opp-microvolt = <825000 825000 1250000>;
};
opp02 {
opp-hz = /bits/ 64 <816000000>;
- opp-microvolt = <825000>;
+ opp-microvolt = <825000 825000 1250000>;
};
opp03 {
opp-hz = /bits/ 64 <1008000000>;
- opp-microvolt = <875000>;
+ opp-microvolt = <875000 875000 1250000>;
};
opp04 {
opp-hz = /bits/ 64 <1200000000>;
- opp-microvolt = <950000>;
+ opp-microvolt = <950000 950000 1250000>;
};
opp05 {
opp-hz = /bits/ 64 <1416000000>;
- opp-microvolt = <1025000>;
+ opp-microvolt = <1025000 1025000 1250000>;
};
opp06 {
opp-hz = /bits/ 64 <1608000000>;
- opp-microvolt = <1100000>;
+ opp-microvolt = <1100000 1100000 1250000>;
};
opp07 {
opp-hz = /bits/ 64 <1800000000>;
- opp-microvolt = <1200000>;
+ opp-microvolt = <1200000 1200000 1250000>;
};
};
opp00 {
opp-hz = /bits/ 64 <200000000>;
- opp-microvolt = <800000>;
+ opp-microvolt = <825000 825000 1150000>;
};
opp01 {
opp-hz = /bits/ 64 <297000000>;
- opp-microvolt = <800000>;
+ opp-microvolt = <825000 825000 1150000>;
};
opp02 {
opp-hz = /bits/ 64 <400000000>;
- opp-microvolt = <825000>;
+ opp-microvolt = <825000 825000 1150000>;
};
opp03 {
opp-hz = /bits/ 64 <500000000>;
- opp-microvolt = <875000>;
+ opp-microvolt = <875000 875000 1150000>;
};
opp04 {
opp-hz = /bits/ 64 <600000000>;
- opp-microvolt = <925000>;
+ opp-microvolt = <925000 925000 1150000>;
};
opp05 {
opp-hz = /bits/ 64 <800000000>;
- opp-microvolt = <1100000>;
+ opp-microvolt = <1100000 1100000 1150000>;
};
};
};
#include "dt-bindings/pwm/pwm.h"
#include "dt-bindings/input/input.h"
+#include "dt-bindings/usb/pd.h"
#include "rk3399.dtsi"
#include "rk3399-opp.dtsi"
model = "Orange Pi RK3399 Board";
compatible = "rockchip,rk3399-orangepi", "rockchip,rk3399";
+ aliases {
+ mmc0 = &sdio0;
+ mmc1 = &sdmmc;
+ mmc2 = &sdhci;
+ };
+
chosen {
stdout-path = "serial2:1500000n8";
};
#address-cells = <1>;
#size-cells = <0>;
- rtl8211e: phy@1 {
+ rtl8211e: ethernet-phy@1 {
reg = <1>;
interrupt-parent = <&gpio3>;
interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&chg_cc_int_l>;
vbus-supply = <&vbus_typec>;
+
+ typec_con: connector {
+ compatible = "usb-c-connector";
+ data-role = "host";
+ label = "USB-C";
+ op-sink-microwatt = <1000000>;
+ power-role = "dual";
+ sink-pdos =
+ <PDO_FIXED(5000, 2500, PDO_FIXED_USB_COMM)>;
+ source-pdos =
+ <PDO_FIXED(5000, 1400, PDO_FIXED_USB_COMM)>;
+ try-power-role = "sink";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ typec_hs: endpoint {
+ remote-endpoint = <&u2phy0_typec_hs>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ typec_ss: endpoint {
+ remote-endpoint = <&tcphy0_typec_ss>;
+ };
+ };
+ port@2 {
+ reg = <2>;
+ typec_dp: endpoint {
+ remote-endpoint = <&tcphy0_typec_dp>;
+ };
+ };
+ };
+ };
};
};
};
};
- phy {
+ gmac {
phy_intb: phy-intb {
rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
};
status = "okay";
};
+&tcphy0_dp {
+ port {
+ tcphy0_typec_dp: endpoint {
+ remote-endpoint = <&typec_dp>;
+ };
+ };
+};
+
+&tcphy0_usb3 {
+ port {
+ tcphy0_typec_ss: endpoint {
+ remote-endpoint = <&typec_ss>;
+ };
+ };
+};
+
&tcphy1 {
status = "okay";
};
phy-supply = <&vcc5v0_host>;
status = "okay";
};
+
+ port {
+ u2phy0_typec_hs: endpoint {
+ remote-endpoint = <&typec_hs>;
+ };
+ };
};
&u2phy1 {
&usbdrd_dwc3_0 {
status = "okay";
- dr_mode = "otg";
+ dr_mode = "host";
};
&usbdrd3_1 {
model = "Pine64 Pinebook Pro";
compatible = "pine64,pinebook-pro", "rockchip,rk3399";
+ aliases {
+ mmc0 = &sdio0;
+ mmc1 = &sdmmc;
+ mmc2 = &sdhci;
+ };
+
chosen {
stdout-path = "serial2:1500000n8";
};
pwms = <&pwm0 0 740740 0>;
};
+ bat: battery {
+ compatible = "simple-battery";
+ charge-full-design-microamp-hours = <9800000>;
+ voltage-max-design-microvolt = <4350000>;
+ voltage-min-design-microvolt = <3000000>;
+ };
+
edp_panel: edp-panel {
compatible = "boe,nv140fhmn49";
backlight = <&backlight>;
enable-gpios = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
- pinctrl-0 = <&panel_en_gpio>;
+ pinctrl-0 = <&panel_en_pin>;
power-supply = <&vcc3v3_panel>;
ports {
gpio-key-lid {
compatible = "gpio-keys";
pinctrl-names = "default";
- pinctrl-0 = <&lidbtn_gpio>;
+ pinctrl-0 = <&lidbtn_pin>;
lid {
debounce-interval = <20>;
gpio-key-power {
compatible = "gpio-keys";
pinctrl-names = "default";
- pinctrl-0 = <&pwrbtn_gpio>;
+ pinctrl-0 = <&pwrbtn_pin>;
power {
debounce-interval = <20>;
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
- pinctrl-0 = <&pwrled_gpio &slpled_gpio>;
+ pinctrl-0 = <&pwr_led_pin &slp_led_pin>;
- green-led {
+ green_led: led-0 {
color = <LED_COLOR_ID_GREEN>;
default-state = "on";
function = LED_FUNCTION_POWER;
label = "green:power";
};
- red-led {
+ red_led: led-1 {
color = <LED_COLOR_ID_RED>;
default-state = "off";
function = LED_FUNCTION_STANDBY;
clocks = <&rk808 1>;
clock-names = "ext_clock";
pinctrl-names = "default";
- pinctrl-0 = <&wifi_enable_h_gpio>;
+ pinctrl-0 = <&wifi_enable_h_pin>;
post-power-on-delay-ms = <100>;
power-off-delay-us = <500000>;
es8316-sound {
compatible = "simple-audio-card";
pinctrl-names = "default";
- pinctrl-0 = <&hp_det_gpio>;
+ pinctrl-0 = <&hp_det_pin>;
simple-audio-card,name = "rockchip,es8316-codec";
simple-audio-card,format = "i2s";
simple-audio-card,mclk-fs = <256>;
enable-active-high;
gpio = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
- pinctrl-0 = <&pwr_5v_gpio>;
+ pinctrl-0 = <&pwr_5v_pin>;
regulator-name = "vcc5v0_usb";
regulator-always-on;
regulator-min-microvolt = <5000000>;
enable-active-high;
gpio = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
- pinctrl-0 = <&sdmmc0_pwr_h_gpio>;
+ pinctrl-0 = <&sdmmc0_pwr_h_pin>;
regulator-name = "vcc3v0_sd";
regulator-always-on;
regulator-min-microvolt = <3000000>;
enable-active-high;
gpio = <&gpio1 RK_PC6 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
- pinctrl-0 = <&lcdvcc_en_gpio>;
+ pinctrl-0 = <&lcdvcc_en_pin>;
regulator-name = "vcc3v3_panel";
regulator-always-on;
regulator-min-microvolt = <3300000>;
enable-active-high;
gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
- pinctrl-0 = <&vcc5v0_host_en_gpio>;
+ pinctrl-0 = <&vcc5v0_host_en_pin>;
regulator-name = "vcc5v0_otg";
regulator-always-on;
regulator-min-microvolt = <5000000>;
enable-active-high;
gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
- pinctrl-0 = <&vcc5v0_typec0_en_gpio>;
+ pinctrl-0 = <&vcc5v0_typec0_en_pin>;
regulator-name = "vbus_5vout";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
/* Also triggered by USB charger */
pinctrl-names = "default";
- pinctrl-0 = <&dc_det_gpio>;
+ pinctrl-0 = <&dc_det_pin>;
};
};
interrupt-parent = <&gpio3>;
interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
- pinctrl-0 = <&pmic_int_l_gpio>;
+ pinctrl-0 = <&pmic_int_l_pin>;
rockchip,system-power-controller;
wakeup-source;
reg = <0x40>;
fcs,suspend-voltage-selector = <1>;
pinctrl-names = "default";
- pinctrl-0 = <&vsel1_gpio>;
+ pinctrl-0 = <&vsel1_pin>;
regulator-name = "vdd_cpu_b";
regulator-always-on;
regulator-boot-on;
reg = <0x41>;
fcs,suspend-voltage-selector = <1>;
pinctrl-names = "default";
- pinctrl-0 = <&vsel2_gpio>;
+ pinctrl-0 = <&vsel2_pin>;
regulator-name = "vdd_gpu";
regulator-always-on;
regulator-boot-on;
fusb0: fusb30x@22 {
compatible = "fcs,fusb302";
reg = <0x22>;
- fcs,int_n = <&gpio1 RK_PA2 GPIO_ACTIVE_HIGH>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
- pinctrl-0 = <&fusb0_int_gpio>;
+ pinctrl-0 = <&fusb0_int_pin>;
vbus-supply = <&vbus_typec>;
connector {
};
};
};
+
+ cw2015@62 {
+ compatible = "cellwise,cw2015";
+ reg = <0x62>;
+ cellwise,battery-profile = /bits/ 8 <
+ 0x17 0x67 0x80 0x73 0x6E 0x6C 0x6B 0x63
+ 0x77 0x51 0x5C 0x58 0x50 0x4C 0x48 0x36
+ 0x15 0x0C 0x0C 0x19 0x5B 0x7D 0x6F 0x69
+ 0x69 0x5B 0x0C 0x29 0x20 0x40 0x52 0x59
+ 0x57 0x56 0x54 0x4F 0x3B 0x1F 0x7F 0x17
+ 0x06 0x1A 0x30 0x5A 0x85 0x93 0x96 0x2D
+ 0x48 0x77 0x9C 0xB3 0x80 0x52 0x94 0xCB
+ 0x2F 0x00 0x64 0xA5 0xB5 0x11 0xF0 0x11
+ >;
+ cellwise,monitor-interval-ms = <5000>;
+ monitored-battery = <&bat>;
+ power-supplies = <&mains_charger>, <&fusb0>;
+ };
};
&i2s1 {
- #sound-dai-cells = <0>;
pinctrl-names = "default";
- pinctrl-0 = <&i2s_8ch_mclk_gpio>, <&i2s1_2ch_bus>;
+ pinctrl-0 = <&i2s_8ch_mclk_pin>, <&i2s1_2ch_bus>;
rockchip,capture-channels = <8>;
rockchip,playback-channels = <8>;
status = "okay";
&pcie0 {
bus-scan-delay-ms = <1000>;
ep-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>;
- max-link-speed = <2>;
num-lanes = <4>;
pinctrl-names = "default";
pinctrl-0 = <&pcie_clkreqn_cpm>;
&pinctrl {
buttons {
- pwrbtn_gpio: pwrbtn-gpio {
+ pwrbtn_pin: pwrbtn-pin {
rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
};
- lidbtn_gpio: lidbtn-gpio {
+ lidbtn_pin: lidbtn-pin {
rockchip,pins = <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
dc-charger {
- dc_det_gpio: dc-det-gpio {
+ dc_det_pin: dc-det-pin {
rockchip,pins = <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
es8316 {
- hp_det_gpio: hp-det-gpio {
+ hp_det_pin: hp-det-pin {
rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
fusb302x {
- fusb0_int_gpio: fusb0-int-gpio {
+ fusb0_int_pin: fusb0-int-pin {
rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
i2s1 {
- i2s_8ch_mclk_gpio: i2s-8ch-mclk-gpio {
+ i2s_8ch_mclk_pin: i2s-8ch-mclk-pin {
rockchip,pins = <4 RK_PA0 1 &pcfg_pull_none>;
};
};
lcd-panel {
- lcdvcc_en_gpio: lcdvcc-en-gpio {
+ lcdvcc_en_pin: lcdvcc-en-pin {
rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
};
- panel_en_gpio: panel-en-gpio {
+ panel_en_pin: panel-en-pin {
rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
};
- lcd_panel_reset_gpio: lcd-panel-reset-gpio {
+ lcd_panel_reset_pin: lcd-panel-reset-pin {
rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
leds {
- pwrled_gpio: pwrled_gpio {
+ pwr_led_pin: pwr-led-pin {
rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
};
- slpled_gpio: slpled_gpio {
+ slp_led_pin: slp-led-pin {
rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
pmic {
- pmic_int_l_gpio: pmic-int-l-gpio {
+ pmic_int_l_pin: pmic-int-l-pin {
rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
};
- vsel1_gpio: vsel1-gpio {
+ vsel1_pin: vsel1-pin {
rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
};
- vsel2_gpio: vsel2-gpio {
+ vsel2_pin: vsel2-pin {
rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
};
};
sdcard {
- sdmmc0_pwr_h_gpio: sdmmc0-pwr-h-gpio {
+ sdmmc0_pwr_h_pin: sdmmc0-pwr-h-pin {
rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
sdio-pwrseq {
- wifi_enable_h_gpio: wifi-enable-h-gpio {
+ wifi_enable_h_pin: wifi-enable-h-pin {
rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
usb-typec {
- vcc5v0_typec0_en_gpio: vcc5v0-typec0-en-gpio {
+ vcc5v0_typec0_en_pin: vcc5v0-typec0-en-pin {
rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
usb2 {
- pwr_5v_gpio: pwr-5v-gpio {
+ pwr_5v_pin: pwr-5v-pin {
rockchip,pins = <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
};
- vcc5v0_host_en_gpio: vcc5v0-host-en-gpio {
+ vcc5v0_host_en_pin: vcc5v0-host-en-pin {
rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
wireless-bluetooth {
- bt_wake_gpio: bt-wake-gpio {
+ bt_wake_pin: bt-wake-pin {
rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
};
- bt_host_wake_gpio: bt-host-wake-gpio {
+ bt_host_wake_pin: bt-host-wake-pin {
rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
};
- bt_reset_gpio: bt-reset-gpio {
+ bt_reset_pin: bt-reset-pin {
rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
max-speed = <1500000>;
pinctrl-names = "default";
- pinctrl-0 = <&bt_host_wake_gpio &bt_wake_gpio &bt_reset_gpio>;
+ pinctrl-0 = <&bt_host_wake_pin &bt_wake_pin &bt_reset_pin>;
shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
vbat-supply = <&wifi_bat>;
vddio-supply = <&vcc_wl>;
model = "Theobroma Systems RK3399-Q7 SoM";
compatible = "tsd,rk3399-puma-haikou", "rockchip,rk3399";
+ aliases {
+ mmc1 = &sdmmc;
+ };
+
chosen {
stdout-path = "serial0:115200n8";
};
leds {
- pinctrl-0 = <&led_pin_module>, <&led_sd_haikou>;
+ pinctrl-0 = <&module_led_pin>, <&sd_card_led_pin>;
- sd-card-led {
+ sd_card_led: led-1 {
label = "sd_card_led";
gpios = <&gpio1 RK_PA2 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "mmc0";
};
leds {
- led_sd_haikou: led-sd-gpio {
+ sd_card_led_pin: sd-card-led-pin {
rockchip,pins =
<1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
};
#include "rk3399-opp.dtsi"
/ {
+ aliases {
+ mmc0 = &sdhci;
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
- pinctrl-0 = <&led_pin_module>;
+ pinctrl-0 = <&module_led_pin>;
- module-led {
+ module_led: led-0 {
label = "module_led";
gpios = <&gpio2 RK_PD1 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
};
};
- /*
- * Overwrite the opp-table for CPUB as this board uses a different
- * regulator (FAN53555) that only allows 10mV steps and therefore
- * can't reach the operation point target voltages from rk3399-opp.dtsi
- */
- /delete-node/ opp-table1;
- cluster1_opp: opp-table1 {
- compatible = "operating-points-v2";
- opp-shared;
-
- opp00 {
- opp-hz = /bits/ 64 <408000000>;
- opp-microvolt = <800000>;
- clock-latency-ns = <40000>;
- };
- opp01 {
- opp-hz = /bits/ 64 <600000000>;
- opp-microvolt = <800000>;
- };
- opp02 {
- opp-hz = /bits/ 64 <816000000>;
- opp-microvolt = <830000>;
- opp-suspend;
- };
- opp03 {
- opp-hz = /bits/ 64 <1008000000>;
- opp-microvolt = <880000>;
- };
- opp04 {
- opp-hz = /bits/ 64 <1200000000>;
- opp-microvolt = <950000>;
- };
- opp05 {
- opp-hz = /bits/ 64 <1416000000>;
- opp-microvolt = <1030000>;
- };
- opp06 {
- opp-hz = /bits/ 64 <1608000000>;
- opp-microvolt = <1100000>;
- };
- opp07 {
- opp-hz = /bits/ 64 <1800000000>;
- opp-microvolt = <1200000>;
- };
- opp08 {
- opp-hz = /bits/ 64 <1992000000>;
- opp-microvolt = <1230000>;
- turbo-mode;
- };
- };
-
clkin_gmac: external-gmac-clock {
compatible = "fixed-clock";
clock-frequency = <125000000>;
};
leds {
- led_pin_module: led-module-gpio {
+ module_led_pin: module-led-pin {
rockchip,pins =
<2 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
};
model = "Firefly ROC-RK3399-PC Mezzanine Board";
compatible = "firefly,roc-rk3399-pc-mezzanine", "rockchip,rk3399";
+ aliases {
+ mmc2 = &sdio0;
+ };
+
+ /* MP8009 PoE PD */
+ poe_12v: poe-12v {
+ compatible = "regulator-fixed";
+ regulator-name = "poe_12v";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ };
+
vcc3v3_ngff: vcc3v3-ngff {
compatible = "regulator-fixed";
regulator-name = "vcc3v3_ngff";
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- vin-supply = <&dc_12v>;
+ vin-supply = <&sys_12v>;
};
vcc3v3_pcie: vcc3v3-pcie {
pinctrl-0 = <&vcc3v3_pcie_en>;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- vin-supply = <&dc_12v>;
+ vin-supply = <&sys_12v>;
};
};
+&sys_12v {
+ vin-supply = <&poe_12v>;
+};
+
&pcie_phy {
status = "okay";
};
model = "Firefly ROC-RK3399-PC Board";
compatible = "firefly,roc-rk3399-pc", "rockchip,rk3399";
+ aliases {
+ mmc0 = &sdmmc;
+ mmc1 = &sdhci;
+ };
+
chosen {
stdout-path = "serial2:1500000n8";
};
};
};
+ ir-receiver {
+ compatible = "gpio-ir-receiver";
+ gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&ir_int>;
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
- pinctrl-0 = <&work_led_gpio>, <&diy_led_gpio>, <&yellow_led_gpio>;
+ pinctrl-0 = <&work_led_pin>, <&diy_led_pin>, <&yellow_led_pin>;
- work-led {
+ work_led: led-0 {
label = "green:work";
gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
default-state = "on";
linux,default-trigger = "heartbeat";
};
- diy-led {
+ diy_led: led-1 {
label = "red:diy";
gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
default-state = "off";
- linux,default-trigger = "mmc1";
+ linux,default-trigger = "mmc2";
};
- yellow-led {
+ yellow_led: led-2 {
label = "yellow:yellow-led";
gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
default-state = "off";
- linux,default-trigger = "mmc0";
+ linux,default-trigger = "mmc1";
};
};
regulator-max-microvolt = <5000000>;
};
+ sys_12v: sys-12v {
+ compatible = "regulator-fixed";
+ regulator-name = "sys_12v";
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&dc_12v>;
+ };
+
/* switched by pmic_sleep */
vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
compatible = "regulator-fixed";
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- vin-supply = <&dc_12v>;
+ vin-supply = <&sys_12v>;
};
vcca_0v9: vcca-0v9 {
regulator-boot-on;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- vin-supply = <&dc_12v>;
+ vin-supply = <&sys_12v>;
};
vdd_log: vdd-log {
vcc_sdio: LDO_REG4 {
regulator-name = "vcc_sdio";
+ regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3000000>;
reg = <0x40>;
fcs,suspend-voltage-selector = <1>;
pinctrl-names = "default";
- pinctrl-0 = <&vsel1_gpio>;
+ pinctrl-0 = <&vsel1_pin>;
regulator-name = "vdd_cpu_b";
regulator-min-microvolt = <712500>;
regulator-max-microvolt = <1500000>;
reg = <0x41>;
fcs,suspend-voltage-selector = <1>;
pinctrl-names = "default";
- pinctrl-0 = <&vsel2_gpio>;
+ pinctrl-0 = <&vsel2_pin>;
regulator-name = "vdd_gpu";
regulator-min-microvolt = <712500>;
regulator-max-microvolt = <1500000>;
regulator-ramp-delay = <1000>;
+ regulator-always-on;
+ regulator-boot-on;
vin-supply = <&vcc3v3_sys>;
regulator-state-mem {
};
};
+ ir {
+ ir_int: ir-int {
+ rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
lcd-panel {
lcd_panel_reset: lcd-panel-reset {
rockchip,pins = <4 RK_PD5 RK_FUNC_GPIO &pcfg_pull_up>;
};
leds {
- diy_led_gpio: diy_led-gpio {
+ diy_led_pin: diy-led-pin {
rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
};
- work_led_gpio: work_led-gpio {
+ work_led_pin: work-led-pin {
rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
};
- yellow_led_gpio: yellow_led-gpio {
+ yellow_led_pin: yellow-led-pin {
rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
pmic {
- vsel1_gpio: vsel1-gpio {
+ vsel1_pin: vsel1-pin {
rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
};
- vsel2_gpio: vsel2-gpio {
+ vsel2_pin: vsel2-pin {
rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
};
};
#include "rk3399-opp.dtsi"
/ {
+ aliases {
+ mmc0 = &sdmmc;
+ mmc1 = &sdhci;
+ };
+
chosen {
stdout-path = "serial2:1500000n8";
};
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
};
vdd_log: vdd-log {
regulator-name = "vcc_cam";
regulator-always-on;
regulator-boot-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
regulator-state-mem {
regulator-off-in-suspend;
};
regulator-name = "vcc_mipi";
regulator-always-on;
regulator-boot-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
regulator-state-mem {
regulator-off-in-suspend;
};
reg = <0x40>;
fcs,suspend-voltage-selector = <1>;
pinctrl-names = "default";
- pinctrl-0 = <&vsel1_gpio>;
+ pinctrl-0 = <&vsel1_pin>;
regulator-name = "vdd_cpu_b";
regulator-min-microvolt = <712500>;
regulator-max-microvolt = <1500000>;
reg = <0x41>;
fcs,suspend-voltage-selector = <1>;
pinctrl-names = "default";
- pinctrl-0 = <&vsel2_gpio>;
+ pinctrl-0 = <&vsel2_pin>;
regulator-name = "vdd_gpu";
regulator-min-microvolt = <712500>;
regulator-max-microvolt = <1500000>;
};
&i2s0 {
- rockchip,playback-channels = <8>;
- rockchip,capture-channels = <8>;
+ pinctrl-0 = <&i2s0_2ch_bus>;
+ rockchip,capture-channels = <2>;
+ rockchip,playback-channels = <2>;
status = "okay";
};
&pcie0 {
ep-gpios = <&gpio4 RK_PD3 GPIO_ACTIVE_HIGH>;
- max-link-speed = <2>;
num-lanes = <4>;
pinctrl-0 = <&pcie_clkreqnb_cpm>;
pinctrl-names = "default";
rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
};
- vsel1_gpio: vsel1-gpio {
+ vsel1_pin: vsel1-pin {
rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
};
- vsel2_gpio: vsel2-gpio {
+ vsel2_pin: vsel2-pin {
rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
};
};
&usbdrd_dwc3_0 {
status = "okay";
- dr_mode = "otg";
+ dr_mode = "host";
};
&usbdrd3_1 {
/ {
model = "Radxa ROCK Pi 4A";
- compatible = "radxa,rockpi4", "rockchip,rk3399";
+ compatible = "radxa,rockpi4a", "radxa,rockpi4", "rockchip,rk3399";
};
/ {
model = "Radxa ROCK Pi 4B";
- compatible = "radxa,rockpi4", "rockchip,rk3399";
+ compatible = "radxa,rockpi4b", "radxa,rockpi4", "rockchip,rk3399";
+
+ aliases {
+ mmc2 = &sdio0;
+ };
};
&sdio0 {
/ {
model = "Radxa ROCK Pi 4C";
- compatible = "radxa,rockpi4", "rockchip,rk3399";
+ compatible = "radxa,rockpi4c", "radxa,rockpi4", "rockchip,rk3399";
+
+ aliases {
+ mmc2 = &sdio0;
+ };
};
&sdio0 {
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
- pinctrl-0 = <&user_led1>, <&user_led2>, <&user_led3>,
- <&user_led4>, <&wlan_led>, <&bt_led>;
+ pinctrl-0 = <&user_led1_pin>, <&user_led2_pin>,
+ <&user_led3_pin>, <&user_led4_pin>,
+ <&wlan_led_pin>, <&bt_led_pin>;
- user_led1 {
+ user_led1: led-1 {
label = "green:user1";
gpios = <&gpio4 RK_PC2 0>;
linux,default-trigger = "heartbeat";
};
- user_led2 {
+ user_led2: led-2 {
label = "green:user2";
gpios = <&gpio4 RK_PC6 0>;
linux,default-trigger = "mmc0";
};
- user_led3 {
+ user_led3: led-3 {
label = "green:user3";
gpios = <&gpio4 RK_PD0 0>;
linux,default-trigger = "mmc1";
};
- user_led4 {
+ user_led4: led-4 {
label = "green:user4";
gpios = <&gpio4 RK_PD4 0>;
panic-indicator;
linux,default-trigger = "none";
};
- wlan_active_led {
+ wlan_active_led: led-5 {
label = "yellow:wlan";
gpios = <&gpio4 RK_PD5 0>;
linux,default-trigger = "phy0tx";
default-state = "off";
};
- bt_active_led {
+ bt_active_led: led-6 {
label = "blue:bt";
gpios = <&gpio4 RK_PD6 0>;
linux,default-trigger = "hci0-power";
};
+&cpu_alert0 {
+ temperature = <65000>;
+};
+
+&cpu_thermal {
+ sustainable-power = <1550>;
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu_alert1>;
+ };
+ };
+};
+
&pcie0 {
ep-gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_HIGH>;
};
&pinctrl {
leds {
- user_led1: user_led1 {
+ user_led1_pin: user-led1-pin {
rockchip,pins =
<4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
};
- user_led2: user_led2 {
+ user_led2_pin: user-led2-pin {
rockchip,pins =
<4 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
};
- user_led3: user_led3 {
+ user_led3_pin: user-led3-pin {
rockchip,pins =
<4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
};
- user_led4: user_led4 {
+ user_led4_pin: user-led4-pin {
rockchip,pins =
<4 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
};
- wlan_led: wlan_led {
+ wlan_led_pin: wlan-led-pin {
rockchip,pins =
<4 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
};
- bt_led: bt_led {
+ bt_led_pin: bt-led-pin {
rockchip,pins =
<4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
};
status = "okay";
};
-&thermal_zones {
- cpu_thermal: cpu {
- polling-delay-passive = <100>;
- polling-delay = <1000>;
- thermal-sensors = <&tsadc 0>;
- sustainable-power = <1550>;
-
- trips {
- cpu_alert0: cpu_alert0 {
- temperature = <65000>;
- hysteresis = <2000>;
- type = "passive";
- };
-
- cpu_alert1: cpu_alert1 {
- temperature = <75000>;
- hysteresis = <2000>;
- type = "passive";
- };
-
- cpu_crit: cpu_crit {
- temperature = <95000>;
- hysteresis = <2000>;
- type = "critical";
- };
- };
-
- cooling-maps {
- map0 {
-
- trip = <&cpu_alert1>;
- cooling-device =
- <&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&cpu_b1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
- };
- };
- };
-};
-
&usbdrd_dwc3_0 {
dr_mode = "otg";
};
#include "rk3399-opp.dtsi"
/ {
+ aliases {
+ mmc0 = &sdio0;
+ mmc1 = &sdmmc;
+ mmc2 = &sdhci;
+ };
+
sdio_pwrseq: sdio-pwrseq {
compatible = "mmc-pwrseq-simple";
clocks = <&rk808 1>;
<1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
};
- vsel1_gpio: vsel1-gpio {
+ vsel1_pin: vsel1-pin {
rockchip,pins =
<1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
};
- vsel2_gpio: vsel2-gpio {
+ vsel2_pin: vsel2-pin {
rockchip,pins =
<1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
};
#include "rk3399-opp.dtsi"
/ {
+ aliases {
+ mmc0 = &sdio0;
+ mmc1 = &sdmmc;
+ mmc2 = &sdhci;
+ };
+
chosen {
stdout-path = "serial2:1500000n8";
};
};
};
+ ir-receiver {
+ compatible = "gpio-ir-receiver";
+ gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>;
+ pinctrl-0 = <&ir_int>;
+ pinctrl-names = "default";
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
- pinctrl-0 = <&work_led_gpio>, <&diy_led_gpio>;
+ pinctrl-0 = <&work_led_pin>, <&diy_led_pin>;
- work-led {
+ work_led: led-0 {
label = "work";
default-state = "on";
gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
};
- diy-led {
+ diy_led: led-1 {
label = "diy";
default-state = "off";
gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
sound {
compatible = "audio-graph-card";
- label = "rockchip,rk3399";
+ label = "Analog";
dais = <&i2s1_p0>;
};
+ sound-dit {
+ compatible = "audio-graph-card";
+ label = "SPDIF";
+ dais = <&spdif_p0>;
+ };
+
+ spdif-dit {
+ compatible = "linux,spdif-dit";
+ #sound-dai-cells = <0>;
+
+ port {
+ dit_p0_0: endpoint {
+ remote-endpoint = <&spdif_p0_0>;
+ };
+ };
+ };
+
vcc12v_dcin: vcc12v-dcin {
compatible = "regulator-fixed";
regulator-name = "vcc12v_dcin";
vin-supply = <&vcc_1v8>;
};
+ /* micro SD card power */
+ vcc3v0_sd: vcc3v0-sd {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc0_pwr_h>;
+ regulator-name = "vcc3v0_sd";
+ regulator-always-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ vin-supply = <&vcc3v3_sys>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
vcc3v3_pcie: vcc3v3-pcie-regulator {
compatible = "regulator-fixed";
enable-active-high;
reg = <0x40>;
fcs,suspend-voltage-selector = <1>;
pinctrl-names = "default";
- pinctrl-0 = <&vsel1_gpio>;
+ pinctrl-0 = <&vsel1_pin>;
regulator-name = "vdd_cpu_b";
regulator-min-microvolt = <712500>;
regulator-max-microvolt = <1500000>;
reg = <0x41>;
fcs,suspend-voltage-selector = <1>;
pinctrl-names = "default";
- pinctrl-0 = <&vsel2_gpio>;
+ pinctrl-0 = <&vsel2_pin>;
regulator-name = "vdd_gpu";
regulator-min-microvolt = <712500>;
regulator-max-microvolt = <1500000>;
};
};
+ ir {
+ ir_int: ir-int {
+ rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
leds {
- work_led_gpio: work_led-gpio {
+ work_led_pin: work-led-pin {
rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
};
- diy_led_gpio: diy_led-gpio {
+ diy_led_pin: diy-led-pin {
rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
};
- vsel1_gpio: vsel1-gpio {
+ vsel1_pin: vsel1-pin {
rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
};
- vsel2_gpio: vsel2-gpio {
+ vsel2_pin: vsel2-pin {
rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
};
};
+ sdcard {
+ sdmmc0_pwr_h: sdmmc0-pwr-h {
+ rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ };
+
sdio-pwrseq {
wifi_enable_h: wifi-enable-h {
rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
max-frequency = <150000000>;
pinctrl-names = "default";
pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
+ vmmc-supply = <&vcc3v0_sd>;
+ vqmmc-supply = <&vcc_sdio>;
status = "okay";
};
status = "okay";
};
+&spdif {
+ pinctrl-0 = <&spdif_bus_1>;
+
+ spdif_p0: port {
+ spdif_p0_0: endpoint {
+ remote-endpoint = <&dit_p0_0>;
+ };
+ };
+};
+
&spi1 {
status = "okay";
&usbdrd_dwc3_0 {
status = "okay";
- dr_mode = "otg";
+ dr_mode = "host";
};
&usbdrd3_1 {
#clock-cells = <0>;
};
- amba: bus {
- compatible = "simple-bus";
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
-
- dmac_bus: dma-controller@ff6d0000 {
- compatible = "arm,pl330", "arm,primecell";
- reg = <0x0 0xff6d0000 0x0 0x4000>;
- interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH 0>,
- <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH 0>;
- #dma-cells = <1>;
- clocks = <&cru ACLK_DMAC0_PERILP>;
- clock-names = "apb_pclk";
- };
-
- dmac_peri: dma-controller@ff6e0000 {
- compatible = "arm,pl330", "arm,primecell";
- reg = <0x0 0xff6e0000 0x0 0x4000>;
- interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH 0>,
- <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH 0>;
- #dma-cells = <1>;
- clocks = <&cru ACLK_DMAC1_PERILP>;
- clock-names = "apb_pclk";
- };
- };
-
pcie0: pcie@f8000000 {
compatible = "rockchip,rk3399-pcie";
reg = <0x0 0xf8000000 0x0 0x2000000>,
<0x0 0xfd000000 0x0 0x1000000>;
reg-names = "axi-base", "apb-base";
+ device_type = "pci";
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
<0 0 0 2 &pcie0_intc 1>,
<0 0 0 3 &pcie0_intc 2>,
<0 0 0 4 &pcie0_intc 3>;
- linux,pci-domain = <0>;
max-link-speed = <1>;
msi-map = <0x0 &its 0x0 0x1000>;
phys = <&pcie_phy 0>, <&pcie_phy 1>,
<&pcie_phy 2>, <&pcie_phy 3>;
phy-names = "pcie-phy-0", "pcie-phy-1",
"pcie-phy-2", "pcie-phy-3";
- ranges = <0x83000000 0x0 0xfa000000 0x0 0xfa000000 0x0 0x1e00000
- 0x81000000 0x0 0xfbe00000 0x0 0xfbe00000 0x0 0x100000>;
+ ranges = <0x82000000 0x0 0xfa000000 0x0 0xfa000000 0x0 0x1e00000>,
+ <0x81000000 0x0 0xfbe00000 0x0 0xfbe00000 0x0 0x100000>;
resets = <&cru SRST_PCIE_CORE>, <&cru SRST_PCIE_MGMT>,
<&cru SRST_PCIE_MGMT_STICKY>, <&cru SRST_PCIE_PIPE>,
<&cru SRST_PCIE_PM>, <&cru SRST_P_PCIE>,
status = "disabled";
};
- sdhci: sdhci@fe330000 {
+ sdhci: mmc@fe330000 {
compatible = "rockchip,rk3399-sdhci-5.1", "arasan,sdhci-5.1";
reg = <0x0 0xfe330000 0x0 0x10000>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH 0>;
reset-names = "usb3-otg";
status = "disabled";
- usbdrd_dwc3_0: dwc3 {
+ usbdrd_dwc3_0: usb@fe800000 {
compatible = "snps,dwc3";
reg = <0x0 0xfe800000 0x0 0x100000>;
interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH 0>;
reset-names = "usb3-otg";
status = "disabled";
- usbdrd_dwc3_1: dwc3 {
+ usbdrd_dwc3_1: usb@fe900000 {
compatible = "snps,dwc3";
reg = <0x0 0xfe900000 0x0 0x100000>;
interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH 0>;
};
thermal_zones: thermal-zones {
- cpu_thermal: cpu {
+ cpu_thermal: cpu-thermal {
polling-delay-passive = <100>;
polling-delay = <1000>;
};
};
- gpu_thermal: gpu {
+ gpu_thermal: gpu-thermal {
polling-delay-passive = <100>;
polling-delay = <1000>;
rockchip,grf = <&grf>;
rockchip,hw-tshut-temp = <95000>;
pinctrl-names = "init", "default", "sleep";
- pinctrl-0 = <&otp_gpio>;
+ pinctrl-0 = <&otp_pin>;
pinctrl-1 = <&otp_out>;
- pinctrl-2 = <&otp_gpio>;
+ pinctrl-2 = <&otp_pin>;
#thermal-sensor-cells = <1>;
status = "disabled";
};
qos_emmc: qos@ffa58000 {
- compatible = "syscon";
+ compatible = "rockchip,rk3399-qos", "syscon";
reg = <0x0 0xffa58000 0x0 0x20>;
};
qos_gmac: qos@ffa5c000 {
- compatible = "syscon";
+ compatible = "rockchip,rk3399-qos", "syscon";
reg = <0x0 0xffa5c000 0x0 0x20>;
};
qos_pcie: qos@ffa60080 {
- compatible = "syscon";
+ compatible = "rockchip,rk3399-qos", "syscon";
reg = <0x0 0xffa60080 0x0 0x20>;
};
qos_usb_host0: qos@ffa60100 {
- compatible = "syscon";
+ compatible = "rockchip,rk3399-qos", "syscon";
reg = <0x0 0xffa60100 0x0 0x20>;
};
qos_usb_host1: qos@ffa60180 {
- compatible = "syscon";
+ compatible = "rockchip,rk3399-qos", "syscon";
reg = <0x0 0xffa60180 0x0 0x20>;
};
qos_usb_otg0: qos@ffa70000 {
- compatible = "syscon";
+ compatible = "rockchip,rk3399-qos", "syscon";
reg = <0x0 0xffa70000 0x0 0x20>;
};
qos_usb_otg1: qos@ffa70080 {
- compatible = "syscon";
+ compatible = "rockchip,rk3399-qos", "syscon";
reg = <0x0 0xffa70080 0x0 0x20>;
};
qos_sd: qos@ffa74000 {
- compatible = "syscon";
+ compatible = "rockchip,rk3399-qos", "syscon";
reg = <0x0 0xffa74000 0x0 0x20>;
};
qos_sdioaudio: qos@ffa76000 {
- compatible = "syscon";
+ compatible = "rockchip,rk3399-qos", "syscon";
reg = <0x0 0xffa76000 0x0 0x20>;
};
qos_hdcp: qos@ffa90000 {
- compatible = "syscon";
+ compatible = "rockchip,rk3399-qos", "syscon";
reg = <0x0 0xffa90000 0x0 0x20>;
};
qos_iep: qos@ffa98000 {
- compatible = "syscon";
+ compatible = "rockchip,rk3399-qos", "syscon";
reg = <0x0 0xffa98000 0x0 0x20>;
};
qos_isp0_m0: qos@ffaa0000 {
- compatible = "syscon";
+ compatible = "rockchip,rk3399-qos", "syscon";
reg = <0x0 0xffaa0000 0x0 0x20>;
};
qos_isp0_m1: qos@ffaa0080 {
- compatible = "syscon";
+ compatible = "rockchip,rk3399-qos", "syscon";
reg = <0x0 0xffaa0080 0x0 0x20>;
};
qos_isp1_m0: qos@ffaa8000 {
- compatible = "syscon";
+ compatible = "rockchip,rk3399-qos", "syscon";
reg = <0x0 0xffaa8000 0x0 0x20>;
};
qos_isp1_m1: qos@ffaa8080 {
- compatible = "syscon";
+ compatible = "rockchip,rk3399-qos", "syscon";
reg = <0x0 0xffaa8080 0x0 0x20>;
};
qos_rga_r: qos@ffab0000 {
- compatible = "syscon";
+ compatible = "rockchip,rk3399-qos", "syscon";
reg = <0x0 0xffab0000 0x0 0x20>;
};
qos_rga_w: qos@ffab0080 {
- compatible = "syscon";
+ compatible = "rockchip,rk3399-qos", "syscon";
reg = <0x0 0xffab0080 0x0 0x20>;
};
qos_video_m0: qos@ffab8000 {
- compatible = "syscon";
+ compatible = "rockchip,rk3399-qos", "syscon";
reg = <0x0 0xffab8000 0x0 0x20>;
};
qos_video_m1_r: qos@ffac0000 {
- compatible = "syscon";
+ compatible = "rockchip,rk3399-qos", "syscon";
reg = <0x0 0xffac0000 0x0 0x20>;
};
qos_video_m1_w: qos@ffac0080 {
- compatible = "syscon";
+ compatible = "rockchip,rk3399-qos", "syscon";
reg = <0x0 0xffac0080 0x0 0x20>;
};
qos_vop_big_r: qos@ffac8000 {
- compatible = "syscon";
+ compatible = "rockchip,rk3399-qos", "syscon";
reg = <0x0 0xffac8000 0x0 0x20>;
};
qos_vop_big_w: qos@ffac8080 {
- compatible = "syscon";
+ compatible = "rockchip,rk3399-qos", "syscon";
reg = <0x0 0xffac8080 0x0 0x20>;
};
qos_vop_little: qos@ffad0000 {
- compatible = "syscon";
+ compatible = "rockchip,rk3399-qos", "syscon";
reg = <0x0 0xffad0000 0x0 0x20>;
};
qos_perihp: qos@ffad8080 {
- compatible = "syscon";
+ compatible = "rockchip,rk3399-qos", "syscon";
reg = <0x0 0xffad8080 0x0 0x20>;
};
qos_gpu: qos@ffae0000 {
- compatible = "syscon";
+ compatible = "rockchip,rk3399-qos", "syscon";
reg = <0x0 0xffae0000 0x0 0x20>;
};
#size-cells = <0>;
/* These power domains are grouped by VD_CENTER */
- pd_iep@RK3399_PD_IEP {
+ power-domain@RK3399_PD_IEP {
reg = <RK3399_PD_IEP>;
clocks = <&cru ACLK_IEP>,
<&cru HCLK_IEP>;
pm_qos = <&qos_iep>;
+ #power-domain-cells = <0>;
};
- pd_rga@RK3399_PD_RGA {
+ power-domain@RK3399_PD_RGA {
reg = <RK3399_PD_RGA>;
clocks = <&cru ACLK_RGA>,
<&cru HCLK_RGA>;
pm_qos = <&qos_rga_r>,
<&qos_rga_w>;
+ #power-domain-cells = <0>;
};
- pd_vcodec@RK3399_PD_VCODEC {
+ power-domain@RK3399_PD_VCODEC {
reg = <RK3399_PD_VCODEC>;
clocks = <&cru ACLK_VCODEC>,
<&cru HCLK_VCODEC>;
pm_qos = <&qos_video_m0>;
+ #power-domain-cells = <0>;
};
- pd_vdu@RK3399_PD_VDU {
+ power-domain@RK3399_PD_VDU {
reg = <RK3399_PD_VDU>;
clocks = <&cru ACLK_VDU>,
<&cru HCLK_VDU>;
pm_qos = <&qos_video_m1_r>,
<&qos_video_m1_w>;
+ #power-domain-cells = <0>;
};
/* These power domains are grouped by VD_GPU */
- pd_gpu@RK3399_PD_GPU {
+ power-domain@RK3399_PD_GPU {
reg = <RK3399_PD_GPU>;
clocks = <&cru ACLK_GPU>;
pm_qos = <&qos_gpu>;
+ #power-domain-cells = <0>;
};
/* These power domains are grouped by VD_LOGIC */
- pd_edp@RK3399_PD_EDP {
+ power-domain@RK3399_PD_EDP {
reg = <RK3399_PD_EDP>;
clocks = <&cru PCLK_EDP_CTRL>;
+ #power-domain-cells = <0>;
};
- pd_emmc@RK3399_PD_EMMC {
+ power-domain@RK3399_PD_EMMC {
reg = <RK3399_PD_EMMC>;
clocks = <&cru ACLK_EMMC>;
pm_qos = <&qos_emmc>;
+ #power-domain-cells = <0>;
};
- pd_gmac@RK3399_PD_GMAC {
+ power-domain@RK3399_PD_GMAC {
reg = <RK3399_PD_GMAC>;
clocks = <&cru ACLK_GMAC>,
<&cru PCLK_GMAC>;
pm_qos = <&qos_gmac>;
+ #power-domain-cells = <0>;
};
- pd_sd@RK3399_PD_SD {
+ power-domain@RK3399_PD_SD {
reg = <RK3399_PD_SD>;
clocks = <&cru HCLK_SDMMC>,
<&cru SCLK_SDMMC>;
pm_qos = <&qos_sd>;
+ #power-domain-cells = <0>;
};
- pd_sdioaudio@RK3399_PD_SDIOAUDIO {
+ power-domain@RK3399_PD_SDIOAUDIO {
reg = <RK3399_PD_SDIOAUDIO>;
clocks = <&cru HCLK_SDIO>;
pm_qos = <&qos_sdioaudio>;
+ #power-domain-cells = <0>;
+ };
+ power-domain@RK3399_PD_TCPD0 {
+ reg = <RK3399_PD_TCPD0>;
+ clocks = <&cru SCLK_UPHY0_TCPDCORE>,
+ <&cru SCLK_UPHY0_TCPDPHY_REF>;
+ #power-domain-cells = <0>;
+ };
+ power-domain@RK3399_PD_TCPD1 {
+ reg = <RK3399_PD_TCPD1>;
+ clocks = <&cru SCLK_UPHY1_TCPDCORE>,
+ <&cru SCLK_UPHY1_TCPDPHY_REF>;
+ #power-domain-cells = <0>;
};
- pd_usb3@RK3399_PD_USB3 {
+ power-domain@RK3399_PD_USB3 {
reg = <RK3399_PD_USB3>;
clocks = <&cru ACLK_USB3>;
pm_qos = <&qos_usb_otg0>,
<&qos_usb_otg1>;
+ #power-domain-cells = <0>;
};
- pd_vio@RK3399_PD_VIO {
+ power-domain@RK3399_PD_VIO {
reg = <RK3399_PD_VIO>;
+ #power-domain-cells = <1>;
#address-cells = <1>;
#size-cells = <0>;
- pd_hdcp@RK3399_PD_HDCP {
+ power-domain@RK3399_PD_HDCP {
reg = <RK3399_PD_HDCP>;
clocks = <&cru ACLK_HDCP>,
<&cru HCLK_HDCP>,
<&cru PCLK_HDCP>;
pm_qos = <&qos_hdcp>;
+ #power-domain-cells = <0>;
};
- pd_isp0@RK3399_PD_ISP0 {
+ power-domain@RK3399_PD_ISP0 {
reg = <RK3399_PD_ISP0>;
clocks = <&cru ACLK_ISP0>,
<&cru HCLK_ISP0>;
pm_qos = <&qos_isp0_m0>,
<&qos_isp0_m1>;
+ #power-domain-cells = <0>;
};
- pd_isp1@RK3399_PD_ISP1 {
+ power-domain@RK3399_PD_ISP1 {
reg = <RK3399_PD_ISP1>;
clocks = <&cru ACLK_ISP1>,
<&cru HCLK_ISP1>;
pm_qos = <&qos_isp1_m0>,
<&qos_isp1_m1>;
+ #power-domain-cells = <0>;
};
- pd_tcpc0@RK3399_PD_TCPC0 {
- reg = <RK3399_PD_TCPD0>;
- clocks = <&cru SCLK_UPHY0_TCPDCORE>,
- <&cru SCLK_UPHY0_TCPDPHY_REF>;
- };
- pd_tcpc1@RK3399_PD_TCPC1 {
- reg = <RK3399_PD_TCPD1>;
- clocks = <&cru SCLK_UPHY1_TCPDCORE>,
- <&cru SCLK_UPHY1_TCPDPHY_REF>;
- };
- pd_vo@RK3399_PD_VO {
+ power-domain@RK3399_PD_VO {
reg = <RK3399_PD_VO>;
+ #power-domain-cells = <1>;
#address-cells = <1>;
#size-cells = <0>;
- pd_vopb@RK3399_PD_VOPB {
+ power-domain@RK3399_PD_VOPB {
reg = <RK3399_PD_VOPB>;
clocks = <&cru ACLK_VOP0>,
<&cru HCLK_VOP0>;
pm_qos = <&qos_vop_big_r>,
<&qos_vop_big_w>;
+ #power-domain-cells = <0>;
};
- pd_vopl@RK3399_PD_VOPL {
+ power-domain@RK3399_PD_VOPL {
reg = <RK3399_PD_VOPL>;
clocks = <&cru ACLK_VOP1>,
<&cru HCLK_VOP1>;
pm_qos = <&qos_vop_little>;
+ #power-domain-cells = <0>;
};
};
};
pmugrf: syscon@ff320000 {
compatible = "rockchip,rk3399-pmugrf", "syscon", "simple-mfd";
reg = <0x0 0xff320000 0x0 0x1000>;
- #address-cells = <1>;
- #size-cells = <1>;
pmu_io_domains: io-domains {
compatible = "rockchip,rk3399-pmu-io-voltage-domain";
pinctrl-names = "default";
pinctrl-0 = <&pwm0_pin>;
clocks = <&pmucru PCLK_RKPWM_PMU>;
- clock-names = "pwm";
status = "disabled";
};
pinctrl-names = "default";
pinctrl-0 = <&pwm1_pin>;
clocks = <&pmucru PCLK_RKPWM_PMU>;
- clock-names = "pwm";
status = "disabled";
};
pinctrl-names = "default";
pinctrl-0 = <&pwm2_pin>;
clocks = <&pmucru PCLK_RKPWM_PMU>;
- clock-names = "pwm";
status = "disabled";
};
pinctrl-names = "default";
pinctrl-0 = <&pwm3a_pin>;
clocks = <&pmucru PCLK_RKPWM_PMU>;
- clock-names = "pwm";
status = "disabled";
};
power-domains = <&power RK3399_PD_VCODEC>;
};
+ vdec: video-codec@ff660000 {
+ compatible = "rockchip,rk3399-vdec";
+ reg = <0x0 0xff660000 0x0 0x400>;
+ interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&cru ACLK_VDU>, <&cru HCLK_VDU>,
+ <&cru SCLK_VDU_CA>, <&cru SCLK_VDU_CORE>;
+ clock-names = "axi", "ahb", "cabac", "core";
+ iommus = <&vdec_mmu>;
+ power-domains = <&power RK3399_PD_VDU>;
+ };
+
vdec_mmu: iommu@ff660480 {
compatible = "rockchip,iommu";
reg = <0x0 0xff660480 0x0 0x40>, <0x0 0xff6604c0 0x0 0x40>;
interrupt-names = "vdec_mmu";
clocks = <&cru ACLK_VDU>, <&cru HCLK_VDU>;
clock-names = "aclk", "iface";
+ power-domains = <&power RK3399_PD_VDU>;
#iommu-cells = <0>;
- status = "disabled";
};
iep_mmu: iommu@ff670800 {
};
};
+ dmac_bus: dma-controller@ff6d0000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x0 0xff6d0000 0x0 0x4000>;
+ interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH 0>;
+ #dma-cells = <1>;
+ arm,pl330-periph-burst;
+ clocks = <&cru ACLK_DMAC0_PERILP>;
+ clock-names = "apb_pclk";
+ };
+
+ dmac_peri: dma-controller@ff6e0000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x0 0xff6e0000 0x0 0x4000>;
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH 0>;
+ #dma-cells = <1>;
+ arm,pl330-periph-burst;
+ clocks = <&cru ACLK_DMAC1_PERILP>;
+ clock-names = "apb_pclk";
+ };
+
pmucru: pmu-clock-controller@ff750000 {
compatible = "rockchip,rk3399-pmucru";
reg = <0x0 0xff750000 0x0 0x1000>;
status = "disabled";
};
- u2phy0: usb2-phy@e450 {
+ mipi_dphy_rx0: mipi-dphy-rx0 {
+ compatible = "rockchip,rk3399-mipi-dphy-rx0";
+ clocks = <&cru SCLK_MIPIDPHY_REF>,
+ <&cru SCLK_DPHY_RX0_CFG>,
+ <&cru PCLK_VIO_GRF>;
+ clock-names = "dphy-ref", "dphy-cfg", "grf";
+ power-domains = <&power RK3399_PD_VIO>;
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+
+ u2phy0: usb2phy@e450 {
compatible = "rockchip,rk3399-usb2phy";
reg = <0xe450 0x10>;
clocks = <&cru SCLK_USB2PHY0_REF>;
};
};
- u2phy1: usb2-phy@e460 {
+ u2phy1: usb2phy@e460 {
compatible = "rockchip,rk3399-usb2phy";
reg = <0xe460 0x10>;
clocks = <&cru SCLK_USB2PHY1_REF>;
};
watchdog@ff848000 {
- compatible = "snps,dw-wdt";
+ compatible = "rockchip,rk3399-wdt", "snps,dw-wdt";
reg = <0x0 0xff848000 0x0 0x100>;
clocks = <&cru PCLK_WDT>;
interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH 0>;
status = "disabled";
};
+ isp0: isp0@ff910000 {
+ compatible = "rockchip,rk3399-cif-isp";
+ reg = <0x0 0xff910000 0x0 0x4000>;
+ interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&cru SCLK_ISP0>,
+ <&cru ACLK_ISP0_WRAPPER>,
+ <&cru HCLK_ISP0_WRAPPER>;
+ clock-names = "isp", "aclk", "hclk";
+ iommus = <&isp0_mmu>;
+ phys = <&mipi_dphy_rx0>;
+ phy-names = "dphy";
+ power-domains = <&power RK3399_PD_ISP0>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+ };
+
isp0_mmu: iommu@ff914000 {
compatible = "rockchip,iommu";
reg = <0x0 0xff914000 0x0 0x100>, <0x0 0xff915000 0x0 0x100>;
gpu: gpu@ff9a0000 {
compatible = "rockchip,rk3399-mali", "arm,mali-t860";
reg = <0x0 0xff9a0000 0x0 0x10000>;
- interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH 0>,
- <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH 0>,
- <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH 0>;
- interrupt-names = "gpu", "job", "mmu";
+ interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH 0>;
+ interrupt-names = "job", "mmu", "gpu";
clocks = <&cru ACLK_GPU>;
#cooling-cells = <2>;
power-domains = <&power RK3399_PD_GPU>;
};
};
- sleep {
+ suspend {
ap_pwroff: ap-pwroff {
rockchip,pins = <1 RK_PA5 1 &pcfg_pull_none>;
};
};
tsadc {
- otp_gpio: otp-gpio {
+ otp_pin: otp-pin {
rockchip,pins = <1 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
};
/ {
compatible = "vamrs,rk3399pro-vmarc-som", "rockchip,rk3399pro";
+ aliases {
+ mmc0 = &sdmmc;
+ mmc1 = &sdhci;
+ };
+
vcc3v3_pcie: vcc-pcie-regulator {
compatible = "regulator-fixed";
enable-active-high;
&pcie0 {
ep-gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
- max-link-speed = <2>;
num-lanes = <4>;
pinctrl-0 = <&pcie_clkreqnb_cpm>;
pinctrl-names = "default";
};
};
+ sdio-pwrseq {
+ wifi_enable_h: wifi-enable-h {
+ rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
vbus_host {
usb1_en_oc: usb1-en-oc {
rockchip,pins = <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_up>;
projects / u-boot.git / commitdiff