powerpc/corenet_ds: Get rid of the CONFIG_SRIOBOOT_SLAVE_PORTx macro

When compile the slave image for boot from SRIO, no longer need to
specify which SRIO port it will boot from. The code will get this
information from RCW and then finishes corresponding configurations.

This has the following advantages:
	1. No longer need to rebuild an image when change the SRIO port for
	   boot from SRIO, just rewrite the new RCW with selected port,
	   then the code will get the port information by reading new RCW.
	2. It will be easier to support other boot location options, for
	   example, boot from PCIE.

Signed-off-by: Liu Gang <Gang.Liu@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>

diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h
index 53d563ed0a030bde68db52a686583bcc43ae2a71..91228e77ead76ace1e61b9438f2644a3aed2fb3a 100644 (file)
--- a/arch/powerpc/include/asm/immap_85xx.h
+++ b/arch/powerpc/include/asm/immap_85xx.h
@@ -1758,6 +1758,7 @@ typedef struct ccsr_gur {
 #define FSL_CORENET_RCWSR5_DDR_SYNC            0x00000080
 #define FSL_CORENET_RCWSR5_DDR_SYNC_SHIFT               7
 #define FSL_CORENET_RCWSR5_SRDS_EN             0x00002000
+#define FSL_CORENET_RCWSR6_BOOT_LOC    0x0f800000
 #define FSL_CORENET_RCWSRn_SRDS_LPD_B2         0x3c000000 /* bits 162..165 */
 #define FSL_CORENET_RCWSRn_SRDS_LPD_B3         0x003c0000 /* bits 170..173 */
 #define FSL_CORENET_RCWSR7_MCK_TO_PLAT_RAT     0x00400000

diff --git a/board/freescale/common/p_corenet/law.c b/board/freescale/common/p_corenet/law.c
index c4566ddd4f75c2b11c633f9f65f8e687e2327061..09ef5615d26e1db1b9599d89f945b68a05382d56 100644 (file)
--- a/board/freescale/common/p_corenet/law.c
+++ b/board/freescale/common/p_corenet/law.c
@@ -48,19 +48,6 @@ struct law_entry law_table[] = {
 #ifdef CONFIG_SYS_NAND_BASE_PHYS
        SET_LAW(CONFIG_SYS_NAND_BASE_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_LBC),
 #endif
-#ifdef CONFIG_SRIOBOOT_SLAVE
-#if defined(CONFIG_SRIOBOOT_SLAVE_PORT0)
-       SET_LAW(CONFIG_SYS_SRIOBOOT_SLAVE_ADDR_PHYS,
-                               LAW_SIZE_1M, LAW_TRGT_IF_RIO_1),
-       SET_LAW(CONFIG_SYS_SRIOBOOT_UCODE_ENV_ADDR_PHYS,
-                               LAW_SIZE_1M, LAW_TRGT_IF_RIO_1),
-#elif defined(CONFIG_SRIOBOOT_SLAVE_PORT1)
-       SET_LAW(CONFIG_SYS_SRIOBOOT_SLAVE_ADDR_PHYS,
-                               LAW_SIZE_1M, LAW_TRGT_IF_RIO_2),
-       SET_LAW(CONFIG_SYS_SRIOBOOT_UCODE_ENV_ADDR_PHYS,
-                               LAW_SIZE_1M, LAW_TRGT_IF_RIO_2),
-#endif
-#endif
 };
 
 int num_law_entries = ARRAY_SIZE(law_table);

diff --git a/drivers/misc/fsl_law.c b/drivers/misc/fsl_law.c
index a7d04b7ea3923abdfa9b4ecab330f5024a71868d..a71a0ce4267944c1f42874bb71b32b6c0ab553eb 100644 (file)
--- a/drivers/misc/fsl_law.c
+++ b/drivers/misc/fsl_law.c
@@ -275,5 +275,32 @@ void init_laws(void)
                                law_table[i].size, law_table[i].trgt_id);
        }
 
+#ifdef CONFIG_SRIOBOOT_SLAVE
+       /* check RCW to get which port is used for boot */
+       ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
+       u32 bootloc = in_be32(&gur->rcwsr[6]);
+       /* in SRIO boot we need to set specail LAWs for SRIO interfaces */
+       switch ((bootloc & FSL_CORENET_RCWSR6_BOOT_LOC) >> 23) {
+       case 0x8: /* boot from SRIO1 */
+               set_next_law(CONFIG_SYS_SRIOBOOT_SLAVE_ADDR_PHYS,
+                               LAW_SIZE_1M,
+                               LAW_TRGT_IF_RIO_1);
+               set_next_law(CONFIG_SYS_SRIOBOOT_UCODE_ENV_ADDR_PHYS,
+                               LAW_SIZE_1M,
+                               LAW_TRGT_IF_RIO_1);
+               break;
+       case 0x9: /* boot from SRIO2 */
+               set_next_law(CONFIG_SYS_SRIOBOOT_SLAVE_ADDR_PHYS,
+                               LAW_SIZE_1M,
+                               LAW_TRGT_IF_RIO_2);
+               set_next_law(CONFIG_SYS_SRIOBOOT_UCODE_ENV_ADDR_PHYS,
+                               LAW_SIZE_1M,
+                               LAW_TRGT_IF_RIO_2);
+               break;
+       default:
+               break;
+       }
+#endif
+
        return ;
 }

diff --git a/include/configs/P2041RDB.h b/include/configs/P2041RDB.h
index 46a5e4c7aca641e93a74db6070f0b09889123298..9d884a3d27773ea48f1c3cca21af75fddc4277d6 100644 (file)
--- a/include/configs/P2041RDB.h
+++ b/include/configs/P2041RDB.h
@@ -410,9 +410,6 @@ unsigned long get_board_sys_clk(unsigned long dummy);
  * SRIOBOOT - SLAVE
  */
 #ifdef CONFIG_SRIOBOOT_SLAVE
-/* slave port for srioboot */
-#define CONFIG_SRIOBOOT_SLAVE_PORT0
-/* #define CONFIG_SRIOBOOT_SLAVE_PORT1 */
 #define CONFIG_SYS_SRIOBOOT_UCODE_ENV_ADDR 0xFFE00000
 #define CONFIG_SYS_SRIOBOOT_UCODE_ENV_ADDR_PHYS \
                (0x300000000ull | CONFIG_SYS_SRIOBOOT_UCODE_ENV_ADDR)

diff --git a/include/configs/corenet_ds.h b/include/configs/corenet_ds.h
index 7f3af21c10bc795980893663b4b3087c581038bd..847e607577301ca67315af8185d6f16b8e62ed30 100644 (file)
--- a/include/configs/corenet_ds.h
+++ b/include/configs/corenet_ds.h
@@ -412,9 +412,6 @@
  * SRIOBOOT - SLAVE
  */
 #ifdef CONFIG_SRIOBOOT_SLAVE
-/* slave port for srioboot */
-#define CONFIG_SRIOBOOT_SLAVE_PORT0
-/* #define CONFIG_SRIOBOOT_SLAVE_PORT1 */
 #define CONFIG_SYS_SRIOBOOT_UCODE_ENV_ADDR 0xFFE00000
 #define CONFIG_SYS_SRIOBOOT_UCODE_ENV_ADDR_PHYS \
                (0x300000000ull | CONFIG_SYS_SRIOBOOT_UCODE_ENV_ADDR)