Changes since U-Boot 1.1.1:
======================================================================
+* Patch by Mark Jonas, 05 Jul 2004:
+ add support for the Total5100's and Total5200's LCD screen
+
+* Patches by Dan Eisenhut, 01 Jul 2004:
+ - README fixes.
+ - Move doc2000.h include to prevent compiler warning on some boards
+
* Patch by Mark Jonas, 01 Jul 2004:
Added support for Total5100 and Total5200 (Rev.1 and Rev.2)
MGT5100 and MPC5200 based Freescale platforms.
-----------------------------------------------
CFG_CMD_ALL all
- CFG_CMD_DFL Default configuration; at the moment
+ CONFIG_CMD_DFL Default configuration; at the moment
this is includes all commands, except
the ones marked with "*" in the list
above.
If you don't define CONFIG_COMMANDS it defaults to
- CFG_CMD_DFL in include/cmd_confdefs.h. A board can
+ CONFIG_CMD_DFL in include/cmd_confdefs.h. A board can
override the default settings in the respective
include file.
}
}
#endif /* defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET) */
+
+#ifdef CONFIG_VIDEO_SED13806
+#include <sed13806.h>
+
+#define DISPLAY_WIDTH 640
+#define DISPLAY_HEIGHT 480
+
+#ifdef CONFIG_VIDEO_SED13806_8BPP
+#error CONFIG_VIDEO_SED13806_8BPP not supported.
+#endif /* CONFIG_VIDEO_SED13806_8BPP */
+
+#ifdef CONFIG_VIDEO_SED13806_16BPP
+static const S1D_REGS init_regs [] =
+{
+ {0x0001,0x00}, /* Miscellaneous Register */
+ {0x01FC,0x00}, /* Display Mode Register */
+ {0x0004,0x00}, /* General IO Pins Configuration Register 0 */
+ {0x0005,0x00}, /* General IO Pins Configuration Register 1 */
+ {0x0008,0x00}, /* General IO Pins Control Register 0 */
+ {0x0009,0x00}, /* General IO Pins Control Register 1 */
+ {0x0010,0x02}, /* Memory Clock Configuration Register */
+ {0x0014,0x02}, /* LCD Pixel Clock Configuration Register */
+ {0x0018,0x02}, /* CRT/TV Pixel Clock Configuration Register */
+ {0x001C,0x02}, /* MediaPlug Clock Configuration Register */
+ {0x001E,0x01}, /* CPU To Memory Wait State Select Register */
+ {0x0021,0x03}, /* DRAM Refresh Rate Register */
+ {0x002A,0x00}, /* DRAM Timings Control Register 0 */
+ {0x002B,0x01}, /* DRAM Timings Control Register 1 */
+ {0x0020,0x80}, /* Memory Configuration Register */
+ {0x0030,0x25}, /* Panel Type Register */
+ {0x0031,0x00}, /* MOD Rate Register */
+ {0x0032,0x4F}, /* LCD Horizontal Display Width Register */
+ {0x0034,0x13}, /* LCD Horizontal Non-Display Period Register */
+ {0x0035,0x01}, /* TFT FPLINE Start Position Register */
+ {0x0036,0x0B}, /* TFT FPLINE Pulse Width Register */
+ {0x0038,0xDF}, /* LCD Vertical Display Height Register 0 */
+ {0x0039,0x01}, /* LCD Vertical Display Height Register 1 */
+ {0x003A,0x2C}, /* LCD Vertical Non-Display Period Register */
+ {0x003B,0x0A}, /* TFT FPFRAME Start Position Register */
+ {0x003C,0x01}, /* TFT FPFRAME Pulse Width Register */
+ {0x0040,0x05}, /* LCD Display Mode Register */
+ {0x0041,0x00}, /* LCD Miscellaneous Register */
+ {0x0042,0x00}, /* LCD Display Start Address Register 0 */
+ {0x0043,0x00}, /* LCD Display Start Address Register 1 */
+ {0x0044,0x00}, /* LCD Display Start Address Register 2 */
+ {0x0046,0x80}, /* LCD Memory Address Offset Register 0 */
+ {0x0047,0x02}, /* LCD Memory Address Offset Register 1 */
+ {0x0048,0x00}, /* LCD Pixel Panning Register */
+ {0x004A,0x00}, /* LCD Display FIFO High Threshold Control Register */
+ {0x004B,0x00}, /* LCD Display FIFO Low Threshold Control Register */
+ {0x0050,0x4F}, /* CRT/TV Horizontal Display Width Register */
+ {0x0052,0x13}, /* CRT/TV Horizontal Non-Display Period Register */
+ {0x0053,0x01}, /* CRT/TV HRTC Start Position Register */
+ {0x0054,0x0B}, /* CRT/TV HRTC Pulse Width Register */
+ {0x0056,0xDF}, /* CRT/TV Vertical Display Height Register 0 */
+ {0x0057,0x01}, /* CRT/TV Vertical Display Height Register 1 */
+ {0x0058,0x2B}, /* CRT/TV Vertical Non-Display Period Register */
+ {0x0059,0x09}, /* CRT/TV VRTC Start Position Register */
+ {0x005A,0x01}, /* CRT/TV VRTC Pulse Width Register */
+ {0x005B,0x10}, /* TV Output Control Register */
+ {0x0060,0x05}, /* CRT/TV Display Mode Register */
+ {0x0062,0x00}, /* CRT/TV Display Start Address Register 0 */
+ {0x0063,0x00}, /* CRT/TV Display Start Address Register 1 */
+ {0x0064,0x00}, /* CRT/TV Display Start Address Register 2 */
+ {0x0066,0x80}, /* CRT/TV Memory Address Offset Register 0 */
+ {0x0067,0x02}, /* CRT/TV Memory Address Offset Register 1 */
+ {0x0068,0x00}, /* CRT/TV Pixel Panning Register */
+ {0x006A,0x00}, /* CRT/TV Display FIFO High Threshold Control Register */
+ {0x006B,0x00}, /* CRT/TV Display FIFO Low Threshold Control Register */
+ {0x0070,0x00}, /* LCD Ink/Cursor Control Register */
+ {0x0071,0x01}, /* LCD Ink/Cursor Start Address Register */
+ {0x0072,0x00}, /* LCD Cursor X Position Register 0 */
+ {0x0073,0x00}, /* LCD Cursor X Position Register 1 */
+ {0x0074,0x00}, /* LCD Cursor Y Position Register 0 */
+ {0x0075,0x00}, /* LCD Cursor Y Position Register 1 */
+ {0x0076,0x00}, /* LCD Ink/Cursor Blue Color 0 Register */
+ {0x0077,0x00}, /* LCD Ink/Cursor Green Color 0 Register */
+ {0x0078,0x00}, /* LCD Ink/Cursor Red Color 0 Register */
+ {0x007A,0x1F}, /* LCD Ink/Cursor Blue Color 1 Register */
+ {0x007B,0x3F}, /* LCD Ink/Cursor Green Color 1 Register */
+ {0x007C,0x1F}, /* LCD Ink/Cursor Red Color 1 Register */
+ {0x007E,0x00}, /* LCD Ink/Cursor FIFO Threshold Register */
+ {0x0080,0x00}, /* CRT/TV Ink/Cursor Control Register */
+ {0x0081,0x01}, /* CRT/TV Ink/Cursor Start Address Register */
+ {0x0082,0x00}, /* CRT/TV Cursor X Position Register 0 */
+ {0x0083,0x00}, /* CRT/TV Cursor X Position Register 1 */
+ {0x0084,0x00}, /* CRT/TV Cursor Y Position Register 0 */
+ {0x0085,0x00}, /* CRT/TV Cursor Y Position Register 1 */
+ {0x0086,0x00}, /* CRT/TV Ink/Cursor Blue Color 0 Register */
+ {0x0087,0x00}, /* CRT/TV Ink/Cursor Green Color 0 Register */
+ {0x0088,0x00}, /* CRT/TV Ink/Cursor Red Color 0 Register */
+ {0x008A,0x1F}, /* CRT/TV Ink/Cursor Blue Color 1 Register */
+ {0x008B,0x3F}, /* CRT/TV Ink/Cursor Green Color 1 Register */
+ {0x008C,0x1F}, /* CRT/TV Ink/Cursor Red Color 1 Register */
+ {0x008E,0x00}, /* CRT/TV Ink/Cursor FIFO Threshold Register */
+ {0x0100,0x00}, /* BitBlt Control Register 0 */
+ {0x0101,0x00}, /* BitBlt Control Register 1 */
+ {0x0102,0x00}, /* BitBlt ROP Code/Color Expansion Register */
+ {0x0103,0x00}, /* BitBlt Operation Register */
+ {0x0104,0x00}, /* BitBlt Source Start Address Register 0 */
+ {0x0105,0x00}, /* BitBlt Source Start Address Register 1 */
+ {0x0106,0x00}, /* BitBlt Source Start Address Register 2 */
+ {0x0108,0x00}, /* BitBlt Destination Start Address Register 0 */
+ {0x0109,0x00}, /* BitBlt Destination Start Address Register 1 */
+ {0x010A,0x00}, /* BitBlt Destination Start Address Register 2 */
+ {0x010C,0x00}, /* BitBlt Memory Address Offset Register 0 */
+ {0x010D,0x00}, /* BitBlt Memory Address Offset Register 1 */
+ {0x0110,0x00}, /* BitBlt Width Register 0 */
+ {0x0111,0x00}, /* BitBlt Width Register 1 */
+ {0x0112,0x00}, /* BitBlt Height Register 0 */
+ {0x0113,0x00}, /* BitBlt Height Register 1 */
+ {0x0114,0x00}, /* BitBlt Background Color Register 0 */
+ {0x0115,0x00}, /* BitBlt Background Color Register 1 */
+ {0x0118,0x00}, /* BitBlt Foreground Color Register 0 */
+ {0x0119,0x00}, /* BitBlt Foreground Color Register 1 */
+ {0x01E0,0x00}, /* Look-Up Table Mode Register */
+ {0x01E2,0x00}, /* Look-Up Table Address Register */
+ {0x01E4,0x00}, /* Look-Up Table Data Register */
+ {0x01F0,0x00}, /* Power Save Configuration Register */
+ {0x01F1,0x00}, /* Power Save Status Register */
+ {0x01F4,0x00}, /* CPU-to-Memory Access Watchdog Timer Register */
+ {0x01FC,0x01}, /* Display Mode Register */
+ {0, 0}
+};
+#endif /* CONFIG_VIDEO_SED13806_16BPP */
+
+#ifdef CONFIG_CONSOLE_EXTRA_INFO
+/* Return text to be printed besides the logo. */
+void video_get_info_str (int line_number, char *info)
+{
+ if (line_number == 1) {
+#if CONFIG_MGT5100
+ strcpy (info, " Total5100");
+#elif CONFIG_TOTAL5200_REV==1
+ strcpy (info, " Total5200");
+#elif CONFIG_TOTAL5200_REV==2
+ strcpy (info, " Total5200 Rev.2");
+#else
+#error CONFIG_TOTAL5200_REV must be 1 or 2.
+#endif
+ } else {
+ info [0] = '\0';
+ }
+}
+#endif
+
+/* Returns SED13806 base address. First thing called in the driver. */
+unsigned int board_video_init (void)
+{
+ return CFG_LCD_BASE;
+}
+
+/* Called after initializing the SED13806 and before clearing the screen. */
+void board_validate_screen (unsigned int base)
+{
+}
+
+/* Return a pointer to the initialization sequence. */
+const S1D_REGS *board_get_regs (void)
+{
+ return init_regs;
+}
+
+int board_get_width (void)
+{
+ return DISPLAY_WIDTH;
+}
+
+int board_get_height (void)
+{
+ return DISPLAY_HEIGHT;
+}
+
+#endif /* CONFIG_VIDEO_SED13806 */
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
/*
* ATTENTION: Although partially referenced initdram does NOT make real use
- * use of CFG_SDRAM_BASE. The code does not work if CFG_SDRAM_BASE
- * is something else than 0x00000000.
+ * use of CFG_SDRAM_BASE. The code does not work if CFG_SDRAM_BASE
+ * is something else than 0x00000000.
*/
#if defined(CONFIG_MPC5200)
/*
* Configure PSC6_1 and PSC6_3 as GPIO. PSC6 then couldn't be used in
* CODEC or UART mode. Consumer IrDA should still be possible.
- */
+ */
gpio->port_config &= ~(0x07000000);
gpio->port_config |= 0x03000000;
volatile uint *longp;
volatile ushort *shortp;
volatile u_char *cp;
-
+
if (argc < 4) {
printf ("Usage:\n%s\n", cmdtp->usage);
return 1;
/* data to write */
data = simple_strtoul(argv[3], NULL, 16);
-
+
/* We want to optimize the loops to run as fast as possible.
* If we have only one object, just run infinite loops.
*/
puts ("\nMPC5200 registers\n");
printf ("MBAR=%08x\n", CFG_MBAR);
puts ("Memory map registers\n");
- printf ("\tCS0: start %08X\tstop %08X\tconfig %08X\ten %d\n",
+ printf ("\tCS0: start %08X\tstop %08X\tconfig %08X\ten %d\n",
*(volatile ulong*)MPC5XXX_CS0_START,
*(volatile ulong*)MPC5XXX_CS0_STOP,
*(volatile ulong*)MPC5XXX_CS0_CFG,
(*(volatile ulong*)MPC5XXX_ADDECR & 0x00010000) ? 1 : 0);
- printf ("\tCS1: start %08X\tstop %08X\tconfig %08X\ten %d\n",
+ printf ("\tCS1: start %08X\tstop %08X\tconfig %08X\ten %d\n",
*(volatile ulong*)MPC5XXX_CS1_START,
*(volatile ulong*)MPC5XXX_CS1_STOP,
*(volatile ulong*)MPC5XXX_CS1_CFG,
(*(volatile ulong*)MPC5XXX_ADDECR & 0x00020000) ? 1 : 0);
- printf ("\tCS2: start %08X\tstop %08X\tconfig %08X\ten %d\n",
+ printf ("\tCS2: start %08X\tstop %08X\tconfig %08X\ten %d\n",
*(volatile ulong*)MPC5XXX_CS2_START,
*(volatile ulong*)MPC5XXX_CS2_STOP,
*(volatile ulong*)MPC5XXX_CS2_CFG,
(*(volatile ulong*)MPC5XXX_ADDECR & 0x00040000) ? 1 : 0);
- printf ("\tCS3: start %08X\tstop %08X\tconfig %08X\ten %d\n",
+ printf ("\tCS3: start %08X\tstop %08X\tconfig %08X\ten %d\n",
*(volatile ulong*)MPC5XXX_CS3_START,
*(volatile ulong*)MPC5XXX_CS3_STOP,
*(volatile ulong*)MPC5XXX_CS3_CFG,
(*(volatile ulong*)MPC5XXX_ADDECR & 0x00080000) ? 1 : 0);
- printf ("\tCS4: start %08X\tstop %08X\tconfig %08X\ten %d\n",
+ printf ("\tCS4: start %08X\tstop %08X\tconfig %08X\ten %d\n",
*(volatile ulong*)MPC5XXX_CS4_START,
*(volatile ulong*)MPC5XXX_CS4_STOP,
*(volatile ulong*)MPC5XXX_CS4_CFG,
(*(volatile ulong*)MPC5XXX_ADDECR & 0x00100000) ? 1 : 0);
- printf ("\tCS5: start %08X\tstop %08X\tconfig %08X\ten %d\n",
+ printf ("\tCS5: start %08X\tstop %08X\tconfig %08X\ten %d\n",
*(volatile ulong*)MPC5XXX_CS5_START,
*(volatile ulong*)MPC5XXX_CS5_STOP,
*(volatile ulong*)MPC5XXX_CS5_CFG,
(*(volatile ulong*)MPC5XXX_ADDECR & 0x00200000) ? 1 : 0);
- printf ("\tCS6: start %08X\tstop %08X\tconfig %08X\ten %d\n",
+ printf ("\tCS6: start %08X\tstop %08X\tconfig %08X\ten %d\n",
*(volatile ulong*)MPC5XXX_CS6_START,
*(volatile ulong*)MPC5XXX_CS6_STOP,
*(volatile ulong*)MPC5XXX_CS6_CFG,
(*(volatile ulong*)MPC5XXX_ADDECR & 0x04000000) ? 1 : 0);
- printf ("\tCS7: start %08X\tstop %08X\tconfig %08X\ten %d\n",
+ printf ("\tCS7: start %08X\tstop %08X\tconfig %08X\ten %d\n",
*(volatile ulong*)MPC5XXX_CS7_START,
*(volatile ulong*)MPC5XXX_CS7_STOP,
*(volatile ulong*)MPC5XXX_CS7_CFG,
(*(volatile ulong*)MPC5XXX_ADDECR & 0x08000000) ? 1 : 0);
- printf ("\tBOOTCS: start %08X\tstop %08X\tconfig %08X\ten %d\n",
+ printf ("\tBOOTCS: start %08X\tstop %08X\tconfig %08X\ten %d\n",
*(volatile ulong*)MPC5XXX_BOOTCS_START,
*(volatile ulong*)MPC5XXX_BOOTCS_STOP,
*(volatile ulong*)MPC5XXX_BOOTCS_CFG,
(*(volatile ulong*)MPC5XXX_ADDECR & 0x02000000) ? 1 : 0);
- printf ("\tSDRAMCS0: %08X\n",
+ printf ("\tSDRAMCS0: %08X\n",
*(volatile ulong*)MPC5XXX_SDRAM_CS0CFG);
- printf ("\tSDRAMCS0: %08X\n",
+ printf ("\tSDRAMCS0: %08X\n",
*(volatile ulong*)MPC5XXX_SDRAM_CS1CFG);
#endif /* CONFIG_MPC5200 */
return 0;
#include <common.h>
#include <malloc.h>
-#include <linux/mtd/doc2000.h>
-
#undef ECC_DEBUG
#undef PSYCHO_DEBUG
#if (CONFIG_COMMANDS & CFG_CMD_DOC)
+#include <linux/mtd/doc2000.h>
+
/* need to undef it (from asm/termbits.h) */
#undef B0
skip_dev_init = 0;
+ /* Init video chip - returns with framebuffer cleared */
+ if (video_init () == -1)
+ skip_dev_init = 1;
+
/* Force console i/o to serial ? */
if ((penv = getenv ("console")) != NULL)
if (strcmp (penv, "serial") == 0)
return 0;
- /* Init video chip - returns with framebuffer cleared */
- if (video_init () == -1)
- skip_dev_init = 1;
#ifdef CONFIG_VGA_AS_SINGLE_DEVICE
/* Devices VGA and Keyboard will be assigned seperately */
/* Init vga device */
#define CFG_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */
#define CONFIG_NS8382X 1
-#define ADD_PCI_CMD 0 /* CFG_CMD_PCI */
+#define ADD_PCI_CMD 0 /* CFG_CMD_PCI */
#else /* MPC5100 */
/* USB */
#if 0
#define CONFIG_USB_OHCI
-#define ADD_USB_CMD CFG_CMD_USB | CFG_CMD_FAT
+#define ADD_USB_CMD CFG_CMD_USB | CFG_CMD_FAT
#define CONFIG_USB_STORAGE
#else
-#define ADD_USB_CMD 0
+#define ADD_USB_CMD 0
#endif
/* POST support */
ADD_USB_CMD | \
CFG_CMD_POST_DIAG | \
CFG_CMD_DATE | \
- CFG_CMD_REGINFO | \
+ CFG_CMD_REGINFO | \
CFG_CMD_MII | \
CFG_CMD_PING | \
ADD_IDE_CMD)
#include <cmd_confdefs.h>
#if (TEXT_BASE == 0xFC000000) /* Boot low */
-# define CFG_LOWBOOT 1
+# define CFG_LOWBOOT 1
#endif
/*
*/
#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
-#define CONFIG_PREBOOT "echo;" \
+#define CONFIG_PREBOOT "echo;" \
"echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
"echo"
#undef CONFIG_BOOTARGS
#if defined (CONFIG_TQM5200_AA)
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CONFIG_EXTRA_ENV_SETTINGS \
"netdev=eth0\0" \
"nfsargs=setenv bootargs root=/dev/nfs rw " \
"nfsroot=$(serverip):$(rootpath)\0" \
"load=tftp 200000 $(loadfile)\0" \
"load133=tftp 200000 $(loadfile133)\0" \
"loadfile=u-boot_tqm5200_aa_mkr.bin\0" \
- "loadfile133=u-boot_tqm5200_aa_133_mkr.bin\0" \
+ "loadfile133=u-boot_tqm5200_aa_133_mkr.bin\0" \
"update=protect off 1:0-4; erase 1:0-4; cp.b 200000 0xfc000000 $(filesize); protect on 1:0-4\0" \
"serverip=172.20.5.13\0" \
""
#else
#if defined (CONFIG_TQM5200_AB)
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CONFIG_EXTRA_ENV_SETTINGS \
"netdev=eth0\0" \
"nfsargs=setenv bootargs root=/dev/nfs rw " \
"nfsroot=$(serverip):$(rootpath)\0" \
"load=tftp 200000 $(loadfile)\0" \
"load133=tftp 200000 $(loadfile133)\0" \
"loadfile=u-boot_tqm5200_ab_mkr.bin\0" \
- "loadfile133=u-boot_tqm5200_ab_133_mkr.bin\0" \
+ "loadfile133=u-boot_tqm5200_ab_133_mkr.bin\0" \
"update=protect off 1:0-1; erase 1:0-1; cp.b 200000 0xfc000000 $(filesize); protect on 1:0-1\0" \
"serverip=172.20.5.13\0" \
""
#else
#if defined (CONFIG_TQM5200_AC)
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CONFIG_EXTRA_ENV_SETTINGS \
"netdev=eth0\0" \
"nfsargs=setenv bootargs root=/dev/nfs rw " \
"nfsroot=$(serverip):$(rootpath)\0" \
"load=tftp 200000 $(loadfile)\0" \
"load133=tftp 200000 $(loadfile133)\0" \
"loadfile=u-boot_tqm5200_ac_mkr.bin\0" \
- "loadfile133=u-boot_tqm5200_ac_133_mkr.bin\0" \
+ "loadfile133=u-boot_tqm5200_ac_133_mkr.bin\0" \
"update=protect off 1:0-4; erase 1:0-4; cp.b 200000 0xfc000000 $(filesize); protect on 1:0-4\0" \
"serverip=172.20.5.13\0" \
""
/*
* IPB Bus clocking configuration.
*/
-#define CFG_IPBSPEED_133 /* define for 133MHz speed */
+#define CFG_IPBSPEED_133 /* define for 133MHz speed */
#if defined(CFG_IPBSPEED_133)
/*
#endif /* CFG_LOWBOOT */
#define CFG_MAX_FLASH_BANKS 1 /* max num of flash banks
(= chip selects) */
-#define CFG_FLASH_ERASE_TOUT 240000 /* Flash Erase Timeout (in ms) */
-#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */
+#define CFG_FLASH_ERASE_TOUT 240000 /* Flash Erase Timeout (in ms) */
+#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */
/*
* Bit 0 (mask: 0x80000000): 1
* use ALT CAN position: Bits 2-3 (mask: 0x30000000):
* 00 -> No Alternatives, I2C1 is used for onboard EEPROM
- * 01 -> CAN1 on I2C1, CAN2 on Tmr0/1 do not use on TQM5200 with onboard
- * EEPROM
+ * 01 -> CAN1 on I2C1, CAN2 on Tmr0/1 do not use on TQM5200 with onboard
+ * EEPROM
* use PSC1 as UART: Bits 28-31 (mask: 0x00000007): 0100
* use PSC6_1 and PSC6_3 as GPIO: Bits 9:11 (mask: 0x07000000):
* 011 -> PSC6 could not be used as UART or CODEC. IrDA still possible.
*-----------------------------------------------------------------------
*/
-#undef CONFIG_IDE_8xx_PCCARD /* Use IDE with PC Card Adapter */
+#undef CONFIG_IDE_8xx_PCCARD /* Use IDE with PC Card Adapter */
-#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */
-#undef CONFIG_IDE_LED /* LED for ide not supported */
+#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */
+#undef CONFIG_IDE_LED /* LED for ide not supported */
-#define CONFIG_IDE_RESET /* reset for ide supported */
+#define CONFIG_IDE_RESET /* reset for ide supported */
#define CONFIG_IDE_PREINIT
#define CFG_IDE_MAXBUS 1 /* max. 1 IDE bus */
/* Offset for alternate registers */
#define CFG_ATA_ALT_OFFSET (0x005C)
-/* Interval between registers */
-#define CFG_ATA_STRIDE 4
+/* Interval between registers */
+#define CFG_ATA_STRIDE 4
#endif /* __CONFIG_H */
#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */
#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
+/*
+ * Video console
+ */
+#if 1
+#define CONFIG_VIDEO_SED13806
+#define CONFIG_VIDEO_SED13806_16BPP
+
+#define CONFIG_CFB_CONSOLE
+#define CONFIG_VIDEO_LOGO
+/* #define CONFIG_VIDEO_BMP_LOGO */
+#define CONFIG_CONSOLE_EXTRA_INFO
+#define CONFIG_VGA_AS_SINGLE_DEVICE
+#define CONFIG_VIDEO_SW_CURSOR
+#define CONFIG_SPLASH_SCREEN
+
+#define ADD_VIDEO_CMD CFG_CMD_BMP
+#else
+#define ADD_VIDEO_CMD 0
+#endif
#ifdef CONFIG_MPC5200 /* MGT5100 PCI is not supported yet. */
/*
CFG_CMD_EEPROM | \
CFG_CMD_FAT | \
CFG_CMD_IDE | \
+ ADD_VIDEO_CMD | \
ADD_PCI_CMD | \
ADD_USB_CMD)
*/
#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
-#define CONFIG_PREBOOT "echo;" \
+#define CONFIG_PREBOOT \
+ "setenv stdout serial;setenv stderr serial;" \
+ "echo;" \
"echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
"echo"
"net_nfs=tftp 200000 $(bootfile);run nfsargs addip;bootm\0" \
"rootpath=/opt/eldk/ppc_82xx\0" \
"bootfile=/tftpboot/MPC5200/uImage\0" \
+ "console=serial\0" \
""
#define CONFIG_BOOTCOMMAND "run flash_self"
# define CFG_FLASH_SIZE 0x06000000
#endif /* CONFIG_TOTAL5200_REV */
-#if !defined(CFG_LOWBOOT)
+#if defined(CFG_LOWBOOT)
# define CFG_ENV_ADDR 0xFE040000
#else /* CFG_LOWBOOT */
# define CFG_ENV_ADDR 0xFFF40000
#define CFG_MBAR 0xF0000000 /* 64 kB */
#define CFG_FPGA_BASE 0xF0010000 /* 64 kB */
#define CFG_CPLD_BASE 0xF0020000 /* 64 kB */
-#define CFG_LCD_BASE 0xF0100000 /* 2048 kB */
+#define CFG_LCD_BASE 0xF1000000 /* 4096 kB */
/* Use SRAM until RAM will be available */
#define CFG_INIT_RAM_ADDR MPC5XXX_SRAM
#define CFG_CS1_CFG 0x0019FF00 /* 25WS, MX, AL, AA, CE, AS_25, DS_32 */
#define CFG_CS2_START CFG_LCD_BASE
-#define CFG_CS2_SIZE 0x00200000 /* 2048 kB */
-#define CFG_CS2_CFG 0x0019FD00 /* 25WS, MX, AL, AA, CE, AS_25, DS_16 */
+#define CFG_CS2_SIZE 0x00400000 /* 4096 kB */
+#define CFG_CS2_CFG 0x0032FD00 /* 50WS, MX, AL, AA, CE, AS_25, DS_16 */
#if CONFIG_TOTAL5200_REV==1
# define CFG_CS3_START CFG_CPLD_BASE
projects / u-boot.git / commitdiff