]> git.dujemihanovic.xyz Git - u-boot.git/commitdiff
arm: sunxi: add initial H616 DTSI and headers
authorJernej Skrabec <jernej.skrabec@siol.net>
Mon, 11 Jan 2021 20:11:50 +0000 (21:11 +0100)
committerAndre Przywara <andre.przywara@arm.com>
Mon, 25 Jan 2021 21:52:01 +0000 (21:52 +0000)
This commit introduces H616 DTSI file and dt-bindings headers needed for
device tree files.

Files are taken from v3 Linux H616 support submission[1], as the
H616 .dtsi file is not merged upstream yet.

[1] http://lists.infradead.org/pipermail/linux-arm-kernel/2021-January/632082.html

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
arch/arm/dts/sun50i-h616.dtsi [new file with mode: 0644]
include/dt-bindings/clock/sun50i-h6-r-ccu.h
include/dt-bindings/clock/sun50i-h616-ccu.h [new file with mode: 0644]
include/dt-bindings/reset/sun50i-h6-r-ccu.h
include/dt-bindings/reset/sun50i-h616-ccu.h [new file with mode: 0644]

diff --git a/arch/arm/dts/sun50i-h616.dtsi b/arch/arm/dts/sun50i-h616.dtsi
new file mode 100644 (file)
index 0000000..953e8fa
--- /dev/null
@@ -0,0 +1,750 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2020 Arm Ltd.
+// based on the H6 dtsi, which is:
+//   Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io>
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/sun50i-h616-ccu.h>
+#include <dt-bindings/clock/sun50i-h6-r-ccu.h>
+#include <dt-bindings/reset/sun50i-h616-ccu.h>
+#include <dt-bindings/reset/sun50i-h6-r-ccu.h>
+
+/ {
+       interrupt-parent = <&gic>;
+       #address-cells = <2>;
+       #size-cells = <2>;
+
+       cpus {
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               cpu0: cpu@0 {
+                       compatible = "arm,cortex-a53";
+                       device_type = "cpu";
+                       reg = <0>;
+                       enable-method = "psci";
+                       clocks = <&ccu CLK_CPUX>;
+               };
+
+               cpu1: cpu@1 {
+                       compatible = "arm,cortex-a53";
+                       device_type = "cpu";
+                       reg = <1>;
+                       enable-method = "psci";
+                       clocks = <&ccu CLK_CPUX>;
+               };
+
+               cpu2: cpu@2 {
+                       compatible = "arm,cortex-a53";
+                       device_type = "cpu";
+                       reg = <2>;
+                       enable-method = "psci";
+                       clocks = <&ccu CLK_CPUX>;
+               };
+
+               cpu3: cpu@3 {
+                       compatible = "arm,cortex-a53";
+                       device_type = "cpu";
+                       reg = <3>;
+                       enable-method = "psci";
+                       clocks = <&ccu CLK_CPUX>;
+               };
+       };
+
+       reserved-memory {
+               #address-cells = <2>;
+               #size-cells = <2>;
+               ranges;
+
+               /* 512KiB reserved for ARM Trusted Firmware (BL31) */
+               secmon_reserved: secmon@40000000 {
+                       reg = <0x0 0x40000000 0x0 0x80000>;
+                       no-map;
+               };
+       };
+
+       osc24M: osc24M_clk {
+               #clock-cells = <0>;
+               compatible = "fixed-clock";
+               clock-frequency = <24000000>;
+               clock-output-names = "osc24M";
+       };
+
+       pmu {
+               compatible = "arm,cortex-a53-pmu";
+               interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+                            <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+                            <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+                            <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+               interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+       };
+
+       psci {
+               compatible = "arm,psci-0.2";
+               method = "smc";
+       };
+
+       timer {
+               compatible = "arm,armv8-timer";
+               arm,no-tick-in-suspend;
+               interrupts = <GIC_PPI 13
+                       (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+                            <GIC_PPI 14
+                       (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+                            <GIC_PPI 11
+                       (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+                            <GIC_PPI 10
+                       (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+       };
+
+       soc {
+               compatible = "simple-bus";
+               #address-cells = <1>;
+               #size-cells = <1>;
+               ranges = <0x0 0x0 0x0 0x40000000>;
+
+               syscon: syscon@3000000 {
+                       compatible = "allwinner,sun50i-h616-system-control";
+                       reg = <0x03000000 0x1000>;
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+                       ranges;
+
+                       sram_c: sram@28000 {
+                               compatible = "mmio-sram";
+                               reg = <0x00028000 0x30000>;
+                               #address-cells = <1>;
+                               #size-cells = <1>;
+                               ranges = <0 0x00028000 0x30000>;
+                       };
+               };
+
+               ccu: clock@3001000 {
+                       compatible = "allwinner,sun50i-h616-ccu";
+                       reg = <0x03001000 0x1000>;
+                       clocks = <&osc24M>, <&rtc 0>, <&rtc 2>;
+                       clock-names = "hosc", "losc", "iosc";
+                       #clock-cells = <1>;
+                       #reset-cells = <1>;
+               };
+
+               watchdog: watchdog@30090a0 {
+                       compatible = "allwinner,sun50i-h616-wdt",
+                                    "allwinner,sun6i-a31-wdt";
+                       reg = <0x030090a0 0x20>;
+                       interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+                       clocks = <&osc24M>;
+                       status = "disabled";
+               };
+
+               pio: pinctrl@300b000 {
+                       compatible = "allwinner,sun50i-h616-pinctrl";
+                       reg = <0x0300b000 0x400>;
+                       interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+                       clocks = <&ccu CLK_APB1>, <&osc24M>, <&rtc 0>;
+                       clock-names = "apb", "hosc", "losc";
+                       gpio-controller;
+                       #gpio-cells = <3>;
+                       interrupt-controller;
+                       #interrupt-cells = <3>;
+
+                       ext_rgmii_pins: rgmii-pins {
+                               pins = "PI0", "PI1", "PI2", "PI3", "PI4",
+                                      "PI5", "PI7", "PI8", "PI9", "PI10",
+                                      "PI11", "PI12", "PI13", "PI14", "PI15",
+                                      "PI16";
+                               function = "emac0";
+                               drive-strength = <40>;
+                       };
+
+                       i2c0_pins: i2c0-pins {
+                               pins = "PI6", "PI7";
+                               function = "i2c0";
+                       };
+
+                       i2c3_ph_pins: i2c3-ph-pins {
+                               pins = "PH4", "PH5";
+                               function = "i2c3";
+                       };
+
+                       ir_rx_pin: ir_rx_pin {
+                               pins = "PH10";
+                               function = "ir_rx";
+                       };
+
+                       mmc0_pins: mmc0-pins {
+                               pins = "PF0", "PF1", "PF2", "PF3",
+                                      "PF4", "PF5";
+                               function = "mmc0";
+                               drive-strength = <30>;
+                               bias-pull-up;
+                       };
+
+                       mmc1_pins: mmc1-pins {
+                               pins = "PG0", "PG1", "PG2", "PG3",
+                                      "PG4", "PG5";
+                               function = "mmc1";
+                               drive-strength = <30>;
+                               bias-pull-up;
+                       };
+
+                       mmc2_pins: mmc2-pins {
+                               pins = "PC0", "PC1", "PC5", "PC6",
+                                      "PC8", "PC9", "PC10", "PC11",
+                                      "PC13", "PC14", "PC15", "PC16";
+                               function = "mmc2";
+                               drive-strength = <30>;
+                               bias-pull-up;
+                       };
+
+                       spi0_pins: spi0-pins {
+                               pins = "PC0", "PC2", "PC3", "PC4";
+                               function = "spi0";
+                       };
+
+                       spi1_pins: spi1-pins {
+                               pins = "PH6", "PH7", "PH8";
+                               function = "spi1";
+                       };
+
+                       spi1_cs_pin: spi1-cs-pin {
+                               pins = "PH5";
+                               function = "spi1";
+                       };
+
+                       uart0_ph_pins: uart0-ph-pins {
+                               pins = "PH0", "PH1";
+                               function = "uart0";
+                       };
+
+                       uart1_pins: uart1-pins {
+                               pins = "PG6", "PG7";
+                               function = "uart1";
+                       };
+
+                       uart1_rts_cts_pins: uart1-rts-cts-pins {
+                               pins = "PG8", "PG9";
+                               function = "uart1";
+                       };
+               };
+
+               gic: interrupt-controller@3021000 {
+                       compatible = "arm,gic-400";
+                       reg = <0x03021000 0x1000>,
+                             <0x03022000 0x2000>,
+                             <0x03024000 0x2000>,
+                             <0x03026000 0x2000>;
+                       interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+                       interrupt-controller;
+                       #interrupt-cells = <3>;
+               };
+
+               mmc0: mmc@4020000 {
+                       compatible = "allwinner,sun50i-h616-mmc",
+                                    "allwinner,sun50i-a100-mmc";
+                       reg = <0x04020000 0x1000>;
+                       clocks = <&ccu CLK_BUS_MMC0>, <&ccu CLK_MMC0>;
+                       clock-names = "ahb", "mmc";
+                       resets = <&ccu RST_BUS_MMC0>;
+                       reset-names = "ahb";
+                       interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&mmc0_pins>;
+                       status = "disabled";
+                       cap-sd-highspeed;
+                       cap-mmc-highspeed;
+                       mmc-ddr-3_3v;
+                       mmc-ddr-1_8v;
+                       cap-sdio-irq;
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+               };
+
+               mmc1: mmc@4021000 {
+                       compatible = "allwinner,sun50i-h616-mmc",
+                                    "allwinner,sun50i-a100-mmc";
+                       reg = <0x04021000 0x1000>;
+                       clocks = <&ccu CLK_BUS_MMC1>, <&ccu CLK_MMC1>;
+                       clock-names = "ahb", "mmc";
+                       resets = <&ccu RST_BUS_MMC1>;
+                       reset-names = "ahb";
+                       interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&mmc1_pins>;
+                       status = "disabled";
+                       cap-sd-highspeed;
+                       cap-mmc-highspeed;
+                       mmc-ddr-3_3v;
+                       mmc-ddr-1_8v;
+                       cap-sdio-irq;
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+               };
+
+               mmc2: mmc@4022000 {
+                       compatible = "allwinner,sun50i-h616-emmc",
+                                    "allwinner,sun50i-a100-emmc";
+                       reg = <0x04022000 0x1000>;
+                       clocks = <&ccu CLK_BUS_MMC2>, <&ccu CLK_MMC2>;
+                       clock-names = "ahb", "mmc";
+                       resets = <&ccu RST_BUS_MMC2>;
+                       reset-names = "ahb";
+                       interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&mmc2_pins>;
+                       status = "disabled";
+                       cap-sd-highspeed;
+                       cap-mmc-highspeed;
+                       mmc-ddr-3_3v;
+                       mmc-ddr-1_8v;
+                       cap-sdio-irq;
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+               };
+
+               uart0: serial@5000000 {
+                       compatible = "snps,dw-apb-uart";
+                       reg = <0x05000000 0x400>;
+                       interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+                       reg-shift = <2>;
+                       reg-io-width = <4>;
+                       clocks = <&ccu CLK_BUS_UART0>;
+                       resets = <&ccu RST_BUS_UART0>;
+                       status = "disabled";
+               };
+
+               uart1: serial@5000400 {
+                       compatible = "snps,dw-apb-uart";
+                       reg = <0x05000400 0x400>;
+                       interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+                       reg-shift = <2>;
+                       reg-io-width = <4>;
+                       clocks = <&ccu CLK_BUS_UART1>;
+                       resets = <&ccu RST_BUS_UART1>;
+                       status = "disabled";
+               };
+
+               uart2: serial@5000800 {
+                       compatible = "snps,dw-apb-uart";
+                       reg = <0x05000800 0x400>;
+                       interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+                       reg-shift = <2>;
+                       reg-io-width = <4>;
+                       clocks = <&ccu CLK_BUS_UART2>;
+                       resets = <&ccu RST_BUS_UART2>;
+                       status = "disabled";
+               };
+
+               uart3: serial@5000c00 {
+                       compatible = "snps,dw-apb-uart";
+                       reg = <0x05000c00 0x400>;
+                       interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+                       reg-shift = <2>;
+                       reg-io-width = <4>;
+                       clocks = <&ccu CLK_BUS_UART3>;
+                       resets = <&ccu RST_BUS_UART3>;
+                       status = "disabled";
+               };
+
+               uart4: serial@5001000 {
+                       compatible = "snps,dw-apb-uart";
+                       reg = <0x05001000 0x400>;
+                       interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+                       reg-shift = <2>;
+                       reg-io-width = <4>;
+                       clocks = <&ccu CLK_BUS_UART4>;
+                       resets = <&ccu RST_BUS_UART4>;
+                       status = "disabled";
+               };
+
+               uart5: serial@5001400 {
+                       compatible = "snps,dw-apb-uart";
+                       reg = <0x05001400 0x400>;
+                       interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+                       reg-shift = <2>;
+                       reg-io-width = <4>;
+                       clocks = <&ccu CLK_BUS_UART5>;
+                       resets = <&ccu RST_BUS_UART5>;
+                       status = "disabled";
+               };
+
+               i2c0: i2c@5002000 {
+                       compatible = "allwinner,sun50i-h616-i2c",
+                                    "allwinner,sun6i-a31-i2c";
+                       reg = <0x05002000 0x400>;
+                       interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+                       clocks = <&ccu CLK_BUS_I2C0>;
+                       resets = <&ccu RST_BUS_I2C0>;
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&i2c0_pins>;
+                       status = "disabled";
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+               };
+
+               i2c1: i2c@5002400 {
+                       compatible = "allwinner,sun50i-h616-i2c",
+                                    "allwinner,sun6i-a31-i2c";
+                       reg = <0x05002400 0x400>;
+                       interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+                       clocks = <&ccu CLK_BUS_I2C1>;
+                       resets = <&ccu RST_BUS_I2C1>;
+                       status = "disabled";
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+               };
+
+               i2c2: i2c@5002800 {
+                       compatible = "allwinner,sun50i-h616-i2c",
+                                    "allwinner,sun6i-a31-i2c";
+                       reg = <0x05002800 0x400>;
+                       interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+                       clocks = <&ccu CLK_BUS_I2C2>;
+                       resets = <&ccu RST_BUS_I2C2>;
+                       status = "disabled";
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+               };
+
+               i2c3: i2c@5002c00 {
+                       compatible = "allwinner,sun50i-h616-i2c",
+                                    "allwinner,sun6i-a31-i2c";
+                       reg = <0x05002c00 0x400>;
+                       interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+                       clocks = <&ccu CLK_BUS_I2C3>;
+                       resets = <&ccu RST_BUS_I2C3>;
+                       status = "disabled";
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+               };
+
+               i2c4: i2c@5003000 {
+                       compatible = "allwinner,sun50i-h616-i2c",
+                                    "allwinner,sun6i-a31-i2c";
+                       reg = <0x05003000 0x400>;
+                       interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+                       clocks = <&ccu CLK_BUS_I2C4>;
+                       resets = <&ccu RST_BUS_I2C4>;
+                       status = "disabled";
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+               };
+
+               spi0: spi@5010000 {
+                       compatible = "allwinner,sun50i-h616-spi",
+                                    "allwinner,sun8i-h3-spi";
+                       reg = <0x05010000 0x1000>;
+                       interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+                       clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>;
+                       clock-names = "ahb", "mod";
+                       resets = <&ccu RST_BUS_SPI0>;
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&spi0_pins>;
+                       status = "disabled";
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+               };
+
+               spi1: spi@5011000 {
+                       compatible = "allwinner,sun50i-h616-spi",
+                                    "allwinner,sun8i-h3-spi";
+                       reg = <0x05011000 0x1000>;
+                       interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+                       clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_SPI1>;
+                       clock-names = "ahb", "mod";
+                       resets = <&ccu RST_BUS_SPI1>;
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&spi1_pins>;
+                       status = "disabled";
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+               };
+
+               emac0: ethernet@5020000 {
+                       compatible = "allwinner,sun50i-h616-emac",
+                                    "allwinner,sun50i-a64-emac";
+                       syscon = <&syscon>;
+                       reg = <0x05020000 0x10000>;
+                       interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+                       interrupt-names = "macirq";
+                       resets = <&ccu RST_BUS_EMAC0>;
+                       reset-names = "stmmaceth";
+                       clocks = <&ccu CLK_BUS_EMAC0>;
+                       clock-names = "stmmaceth";
+                       status = "disabled";
+
+                       mdio0: mdio {
+                               compatible = "snps,dwmac-mdio";
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                       };
+               };
+
+               emac1: ethernet@5030000 {
+                       compatible = "allwinner,sun50i-h616-emac";
+                       syscon = <&syscon 1>;
+                       reg = <0x05030000 0x10000>;
+                       interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+                       interrupt-names = "macirq";
+                       resets = <&ccu RST_BUS_EMAC1>;
+                       reset-names = "stmmaceth";
+                       clocks = <&ccu CLK_BUS_EMAC1>;
+                       clock-names = "stmmaceth";
+                       status = "disabled";
+
+                       mdio1: mdio {
+                               compatible = "snps,dwmac-mdio";
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                       };
+               };
+
+               usbotg: usb@5100000 {
+                       compatible = "allwinner,sun50i-h616-musb",
+                                    "allwinner,sun8i-h3-musb";
+                       reg = <0x05100000 0x0400>;
+                       clocks = <&ccu CLK_BUS_OTG>;
+                       resets = <&ccu RST_BUS_OTG>;
+                       interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+                       interrupt-names = "mc";
+                       phys = <&usbphy 0>;
+                       phy-names = "usb";
+                       extcon = <&usbphy 0>;
+                       status = "disabled";
+               };
+
+               usbphy: phy@5100400 {
+                       compatible = "allwinner,sun50i-h616-usb-phy";
+                       reg = <0x05100400 0x24>,
+                             <0x05101800 0x14>,
+                             <0x05200800 0x14>,
+                             <0x05310800 0x14>,
+                             <0x05311800 0x14>;
+                       reg-names = "phy_ctrl",
+                                   "pmu0",
+                                   "pmu1",
+                                   "pmu2",
+                                   "pmu3";
+                       clocks = <&ccu CLK_USB_PHY0>,
+                                <&ccu CLK_USB_PHY1>,
+                                <&ccu CLK_USB_PHY2>,
+                                <&ccu CLK_USB_PHY3>;
+                       clock-names = "usb0_phy",
+                                     "usb1_phy",
+                                     "usb2_phy",
+                                     "usb3_phy";
+                       resets = <&ccu RST_USB_PHY0>,
+                                <&ccu RST_USB_PHY1>,
+                                <&ccu RST_USB_PHY2>,
+                                <&ccu RST_USB_PHY3>;
+                       reset-names = "usb0_reset",
+                                     "usb1_reset",
+                                     "usb2_reset",
+                                     "usb3_reset";
+                       status = "disabled";
+                       #phy-cells = <1>;
+               };
+
+               ehci0: usb@5101000 {
+                       compatible = "allwinner,sun50i-h616-ehci",
+                                    "generic-ehci";
+                       reg = <0x05101000 0x100>;
+                       interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+                       clocks = <&ccu CLK_BUS_OHCI0>,
+                                <&ccu CLK_BUS_EHCI0>,
+                                <&ccu CLK_USB_OHCI0>;
+                       resets = <&ccu RST_BUS_OHCI0>,
+                                <&ccu RST_BUS_EHCI0>;
+                       phys = <&usbphy 0>;
+                       phy-names = "usb";
+                       status = "disabled";
+               };
+
+               ohci0: usb@5101400 {
+                       compatible = "allwinner,sun50i-h616-ohci",
+                                    "generic-ohci";
+                       reg = <0x05101400 0x100>;
+                       interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+                       clocks = <&ccu CLK_BUS_OHCI0>,
+                                <&ccu CLK_USB_OHCI0>;
+                       resets = <&ccu RST_BUS_OHCI0>;
+                       phys = <&usbphy 0>;
+                       phy-names = "usb";
+                       status = "disabled";
+               };
+
+               ehci1: usb@5200000 {
+                       compatible = "allwinner,sun50i-h616-ehci",
+                                    "generic-ehci";
+                       reg = <0x05200000 0x100>;
+                       interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+                       clocks = <&ccu CLK_BUS_OHCI1>,
+                                <&ccu CLK_BUS_EHCI1>,
+                                <&ccu CLK_USB_OHCI1>;
+                       resets = <&ccu RST_BUS_OHCI1>,
+                                <&ccu RST_BUS_EHCI1>;
+                       phys = <&usbphy 1>;
+                       phy-names = "usb";
+                       status = "disabled";
+               };
+
+               ohci1: usb@5200400 {
+                       compatible = "allwinner,sun50i-h616-ohci",
+                                    "generic-ohci";
+                       reg = <0x05200400 0x100>;
+                       interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+                       clocks = <&ccu CLK_BUS_OHCI1>,
+                                <&ccu CLK_USB_OHCI1>;
+                       resets = <&ccu RST_BUS_OHCI1>;
+                       phys = <&usbphy 1>;
+                       phy-names = "usb";
+                       status = "disabled";
+               };
+
+               ehci2: usb@5310000 {
+                       compatible = "allwinner,sun50i-h616-ehci",
+                                    "generic-ehci";
+                       reg = <0x05310000 0x100>;
+                       interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+                       clocks = <&ccu CLK_BUS_OHCI2>,
+                                <&ccu CLK_BUS_EHCI2>,
+                                <&ccu CLK_USB_OHCI2>;
+                       resets = <&ccu RST_BUS_OHCI2>,
+                                <&ccu RST_BUS_EHCI2>;
+                       phys = <&usbphy 2>;
+                       phy-names = "usb";
+                       status = "disabled";
+               };
+
+               ohci2: usb@5310400 {
+                       compatible = "allwinner,sun50i-h616-ohci",
+                                    "generic-ohci";
+                       reg = <0x05310400 0x100>;
+                       interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+                       clocks = <&ccu CLK_BUS_OHCI2>,
+                                <&ccu CLK_USB_OHCI2>;
+                       resets = <&ccu RST_BUS_OHCI2>;
+                       phys = <&usbphy 2>;
+                       phy-names = "usb";
+                       status = "disabled";
+               };
+
+               ehci3: usb@5311000 {
+                       compatible = "allwinner,sun50i-h616-ehci",
+                                    "generic-ehci";
+                       reg = <0x05311000 0x100>;
+                       interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+                       clocks = <&ccu CLK_BUS_OHCI3>,
+                                <&ccu CLK_BUS_EHCI3>,
+                                <&ccu CLK_USB_OHCI3>;
+                       resets = <&ccu RST_BUS_OHCI3>,
+                                <&ccu RST_BUS_EHCI3>;
+                       phys = <&usbphy 3>;
+                       phy-names = "usb";
+                       status = "disabled";
+               };
+
+               ohci3: usb@5311400 {
+                       compatible = "allwinner,sun50i-h616-ohci",
+                                    "generic-ohci";
+                       reg = <0x05311400 0x100>;
+                       interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+                       clocks = <&ccu CLK_BUS_OHCI3>,
+                                <&ccu CLK_USB_OHCI3>;
+                       resets = <&ccu RST_BUS_OHCI3>;
+                       phys = <&usbphy 3>;
+                       phy-names = "usb";
+                       status = "disabled";
+               };
+
+               rtc: rtc@7000000 {
+                       compatible = "allwinner,sun50i-h616-rtc",
+                                    "allwinner,sun50i-h6-rtc";
+                       reg = <0x07000000 0x400>;
+                       interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+                       clock-output-names = "osc32k", "osc32k-out", "iosc";
+                       #clock-cells = <1>;
+               };
+
+               r_ccu: clock@7010000 {
+                       compatible = "allwinner,sun50i-h616-r-ccu";
+                       reg = <0x07010000 0x400>;
+                       clocks = <&osc24M>, <&rtc 0>, <&rtc 2>,
+                                <&ccu CLK_PLL_PERIPH0>;
+                       clock-names = "hosc", "losc", "iosc", "pll-periph";
+                       #clock-cells = <1>;
+                       #reset-cells = <1>;
+               };
+
+               r_pio: pinctrl@7022000 {
+                       compatible = "allwinner,sun50i-h616-r-pinctrl";
+                       reg = <0x07022000 0x400>;
+                       interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+                       clocks = <&r_ccu CLK_R_APB1>, <&osc24M>, <&rtc 0>;
+                       clock-names = "apb", "hosc", "losc";
+                       gpio-controller;
+                       #gpio-cells = <3>;
+                       interrupt-controller;
+                       #interrupt-cells = <3>;
+
+                       r_i2c_pins: r-i2c-pins {
+                               pins = "PL0", "PL1";
+                               function = "s_i2c";
+                       };
+
+                       r_rsb_pins: r-rsb-pins {
+                               pins = "PL0", "PL1";
+                               function = "s_rsb";
+                       };
+               };
+
+               ir: ir@7040000 {
+                               compatible = "allwinner,sun50i-h616-ir",
+                                            "allwinner,sun6i-a31-ir";
+                               reg = <0x07040000 0x400>;
+                               interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+                               clocks = <&r_ccu CLK_R_APB1_IR>,
+                                        <&r_ccu CLK_IR>;
+                               clock-names = "apb", "ir";
+                               resets = <&r_ccu RST_R_APB1_IR>;
+                               pinctrl-names = "default";
+                               pinctrl-0 = <&ir_rx_pin>;
+                               status = "disabled";
+               };
+
+               r_i2c: i2c@7081400 {
+                       compatible = "allwinner,sun50i-h616-i2c",
+                                    "allwinner,sun6i-a31-i2c";
+                       reg = <0x07081400 0x400>;
+                       interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+                       clocks = <&r_ccu CLK_R_APB2_I2C>;
+                       resets = <&r_ccu RST_R_APB2_I2C>;
+                       status = "disabled";
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+               };
+
+               r_rsb: rsb@7083000 {
+                       compatible = "allwinner,sun50i-h616-rsb",
+                                    "allwinner,sun8i-a23-rsb";
+                       reg = <0x07083000 0x400>;
+                       interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+                       clocks = <&r_ccu CLK_R_APB2_RSB>;
+                       clock-frequency = <3000000>;
+                       resets = <&r_ccu RST_R_APB2_RSB>;
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&r_rsb_pins>;
+                       status = "disabled";
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+               };
+       };
+};
index 76136132a13e98dcfa952b0fc0f02f98b33203b6..890368d252c455316bef24baf921ccd01d33594e 100644 (file)
@@ -21,4 +21,6 @@
 #define CLK_IR                 11
 #define CLK_W1                 12
 
+#define CLK_R_APB2_RSB         13
+
 #endif /* _DT_BINDINGS_CLK_SUN50I_H6_R_CCU_H_ */
diff --git a/include/dt-bindings/clock/sun50i-h616-ccu.h b/include/dt-bindings/clock/sun50i-h616-ccu.h
new file mode 100644 (file)
index 0000000..4fc08b0
--- /dev/null
@@ -0,0 +1,115 @@
+/* SPDX-License-Identifier: (GPL-2.0+ or MIT) */
+/*
+ * Copyright (C) 2020 Arm Ltd.
+ */
+
+#ifndef _DT_BINDINGS_CLK_SUN50I_H616_H_
+#define _DT_BINDINGS_CLK_SUN50I_H616_H_
+
+#define CLK_PLL_PERIPH0                4
+
+#define CLK_CPUX               21
+
+#define CLK_APB1               26
+
+#define CLK_DE                 29
+#define CLK_BUS_DE             30
+#define CLK_DEINTERLACE                31
+#define CLK_BUS_DEINTERLACE    32
+#define CLK_G2D                        33
+#define CLK_BUS_G2D            34
+#define CLK_GPU0               35
+#define CLK_BUS_GPU            36
+#define CLK_GPU1               37
+#define CLK_CE                 38
+#define CLK_BUS_CE             39
+#define CLK_VE                 40
+#define CLK_BUS_VE             41
+#define CLK_BUS_DMA            42
+#define CLK_BUS_HSTIMER                43
+#define CLK_AVS                        44
+#define CLK_BUS_DBG            45
+#define CLK_BUS_PSI            46
+#define CLK_BUS_PWM            47
+#define CLK_BUS_IOMMU          48
+
+#define CLK_MBUS_DMA           50
+#define CLK_MBUS_VE            51
+#define CLK_MBUS_CE            52
+#define CLK_MBUS_TS            53
+#define CLK_MBUS_NAND          54
+#define CLK_MBUS_G2D           55
+
+#define CLK_NAND0              57
+#define CLK_NAND1              58
+#define CLK_BUS_NAND           59
+#define CLK_MMC0               60
+#define CLK_MMC1               61
+#define CLK_MMC2               62
+#define CLK_BUS_MMC0           63
+#define CLK_BUS_MMC1           64
+#define CLK_BUS_MMC2           65
+#define CLK_BUS_UART0          66
+#define CLK_BUS_UART1          67
+#define CLK_BUS_UART2          68
+#define CLK_BUS_UART3          69
+#define CLK_BUS_UART4          70
+#define CLK_BUS_UART5          71
+#define CLK_BUS_I2C0           72
+#define CLK_BUS_I2C1           73
+#define CLK_BUS_I2C2           74
+#define CLK_BUS_I2C3           75
+#define CLK_BUS_I2C4           76
+#define CLK_SPI0               77
+#define CLK_SPI1               78
+#define CLK_BUS_SPI0           79
+#define CLK_BUS_SPI1           80
+#define CLK_EMAC_25M           81
+#define CLK_BUS_EMAC0          82
+#define CLK_BUS_EMAC1          83
+#define CLK_TS                 84
+#define CLK_BUS_TS             85
+#define CLK_BUS_THS            86
+#define CLK_SPDIF              87
+#define CLK_BUS_SPDIF          88
+#define CLK_DMIC               89
+#define CLK_BUS_DMIC           90
+#define CLK_AUDIO_CODEC_1X     91
+#define CLK_AUDIO_CODEC_4X     92
+#define CLK_BUS_AUDIO_CODEC    93
+#define CLK_AUDIO_HUB          94
+#define CLK_BUS_AUDIO_HUB      95
+#define CLK_USB_OHCI0          96
+#define CLK_USB_PHY0           97
+#define CLK_USB_OHCI1          98
+#define CLK_USB_PHY1           99
+#define CLK_USB_OHCI2          100
+#define CLK_USB_PHY2           101
+#define CLK_USB_OHCI3          102
+#define CLK_USB_PHY3           103
+#define CLK_BUS_OHCI0          104
+#define CLK_BUS_OHCI1          105
+#define CLK_BUS_OHCI2          106
+#define CLK_BUS_OHCI3          107
+#define CLK_BUS_EHCI0          108
+#define CLK_BUS_EHCI1          109
+#define CLK_BUS_EHCI2          110
+#define CLK_BUS_EHCI3          111
+#define CLK_BUS_OTG            112
+#define CLK_BUS_KEYADC         113
+#define CLK_HDMI               114
+#define CLK_HDMI_SLOW          115
+#define CLK_HDMI_CEC           116
+#define CLK_BUS_HDMI           117
+#define CLK_BUS_TCON_TOP       118
+#define CLK_TCON_TV0           119
+#define CLK_TCON_TV1           120
+#define CLK_BUS_TCON_TV0       121
+#define CLK_BUS_TCON_TV1       122
+#define CLK_TVE0               123
+#define CLK_BUS_TVE_TOP                124
+#define CLK_BUS_TVE0           125
+#define CLK_HDCP               126
+#define CLK_BUS_HDCP           127
+
+#endif /* _DT_BINDINGS_CLK_SUN50I_H616_H_ */
index 01c84dba49a40ad86feba270a9dd05d6e8bc0b37..7950e799c76df920b916226b5c5063176dc4c48a 100644 (file)
@@ -13,5 +13,6 @@
 #define RST_R_APB2_I2C         4
 #define RST_R_APB1_IR          5
 #define RST_R_APB1_W1          6
+#define RST_R_APB2_RSB         7
 
 #endif /* _DT_BINDINGS_RST_SUN50I_H6_R_CCU_H_ */
diff --git a/include/dt-bindings/reset/sun50i-h616-ccu.h b/include/dt-bindings/reset/sun50i-h616-ccu.h
new file mode 100644 (file)
index 0000000..cb6285a
--- /dev/null
@@ -0,0 +1,70 @@
+/* SPDX-License-Identifier: (GPL-2.0+ or MIT) */
+/*
+ * Copyright (C) 2020 Arm Ltd.
+ */
+
+#ifndef _DT_BINDINGS_RESET_SUN50I_H616_H_
+#define _DT_BINDINGS_RESET_SUN50I_H616_H_
+
+#define RST_MBUS               0
+#define RST_BUS_DE             1
+#define RST_BUS_DEINTERLACE    2
+#define RST_BUS_GPU            3
+#define RST_BUS_CE             4
+#define RST_BUS_VE             5
+#define RST_BUS_DMA            6
+#define RST_BUS_HSTIMER                7
+#define RST_BUS_DBG            8
+#define RST_BUS_PSI            9
+#define RST_BUS_PWM            10
+#define RST_BUS_IOMMU          11
+#define RST_BUS_DRAM           12
+#define RST_BUS_NAND           13
+#define RST_BUS_MMC0           14
+#define RST_BUS_MMC1           15
+#define RST_BUS_MMC2           16
+#define RST_BUS_UART0          17
+#define RST_BUS_UART1          18
+#define RST_BUS_UART2          19
+#define RST_BUS_UART3          20
+#define RST_BUS_UART4          21
+#define RST_BUS_UART5          22
+#define RST_BUS_I2C0           23
+#define RST_BUS_I2C1           24
+#define RST_BUS_I2C2           25
+#define RST_BUS_I2C3           26
+#define RST_BUS_I2C4           27
+#define RST_BUS_SPI0           28
+#define RST_BUS_SPI1           29
+#define RST_BUS_EMAC0          30
+#define RST_BUS_EMAC1          31
+#define RST_BUS_TS             32
+#define RST_BUS_THS            33
+#define RST_BUS_SPDIF          34
+#define RST_BUS_DMIC           35
+#define RST_BUS_AUDIO_CODEC    36
+#define RST_BUS_AUDIO_HUB      37
+#define RST_USB_PHY0           38
+#define RST_USB_PHY1           39
+#define RST_USB_PHY2           40
+#define RST_USB_PHY3           41
+#define RST_BUS_OHCI0          42
+#define RST_BUS_OHCI1          43
+#define RST_BUS_OHCI2          44
+#define RST_BUS_OHCI3          45
+#define RST_BUS_EHCI0          46
+#define RST_BUS_EHCI1          47
+#define RST_BUS_EHCI2          48
+#define RST_BUS_EHCI3          49
+#define RST_BUS_OTG            50
+#define RST_BUS_HDMI           51
+#define RST_BUS_HDMI_SUB       52
+#define RST_BUS_TCON_TOP       53
+#define RST_BUS_TCON_TV0       54
+#define RST_BUS_TCON_TV1       55
+#define RST_BUS_TVE_TOP                56
+#define RST_BUS_TVE0           57
+#define RST_BUS_HDCP           58
+#define RST_BUS_KEYADC         59
+
+#endif /* _DT_BINDINGS_RESET_SUN50I_H616_H_ */