Andre Schwarz <andre.schwarz@matrix-vision.de>
+ mergerbox MPC8377
mvbc_p MPC5200
mvblm7 MPC8343
mvsmr MPC5200
--- /dev/null
+#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).o
+
+COBJS-y += $(BOARD).o pci.o fpga.o sm107.o
+
+COBJS := $(COBJS-y)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak $(obj).depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
--- /dev/null
+/*
+ * (C) Copyright 2002
+ * Rich Ireland, Enterasys Networks, rireland@enterasys.com.
+ * Keith Outwater, keith_outwater@mvis.com.
+ *
+ * (C) Copyright 2011
+ * Andre Schwarz, Matrix Vision GmbH, andre.schwarz@matrix-vision.de
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+#include <ACEX1K.h>
+#include <command.h>
+#include "mergerbox.h"
+#include "fpga.h"
+
+Altera_CYC2_Passive_Serial_fns altera_fns = {
+ fpga_null_fn,
+ fpga_config_fn,
+ fpga_status_fn,
+ fpga_done_fn,
+ fpga_wr_fn,
+ fpga_null_fn,
+ fpga_null_fn,
+};
+
+Altera_desc cyclone2 = {
+ Altera_CYC2,
+ passive_serial,
+ Altera_EP2C20_SIZE,
+ (void *) &altera_fns,
+ NULL,
+ 0
+};
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int mergerbox_init_fpga(void)
+{
+ debug("Initialize FPGA interface\n");
+ fpga_init();
+ fpga_add(fpga_altera, &cyclone2);
+
+ return 1;
+}
+
+int fpga_null_fn(int cookie)
+{
+ return 0;
+}
+
+int fpga_config_fn(int assert, int flush, int cookie)
+{
+ volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
+ volatile gpio83xx_t *gpio = (gpio83xx_t *)&im->gpio[0];
+ u32 dvo = gpio->dat;
+
+ dvo &= ~FPGA_CONFIG;
+ gpio->dat = dvo;
+ udelay(5);
+ dvo |= FPGA_CONFIG;
+ gpio->dat = dvo;
+
+ return assert;
+}
+
+int fpga_done_fn(int cookie)
+{
+ volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
+ volatile gpio83xx_t *gpio = (gpio83xx_t *)&im->gpio[0];
+ int result = 0;
+
+ udelay(10);
+ debug("CONF_DONE check ... ");
+ if (gpio->dat & FPGA_CONF_DONE) {
+ debug("high\n");
+ result = 1;
+ } else
+ debug("low\n");
+
+ return result;
+}
+
+int fpga_status_fn(int cookie)
+{
+ volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
+ volatile gpio83xx_t *gpio = (gpio83xx_t *)&im->gpio[0];
+ int result = 0;
+
+ debug("STATUS check ... ");
+ if (gpio->dat & FPGA_STATUS) {
+ debug("high\n");
+ result = 1;
+ } else
+ debug("low\n");
+
+ return result;
+}
+
+int fpga_clk_fn(int assert_clk, int flush, int cookie)
+{
+ volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
+ volatile gpio83xx_t *gpio = (gpio83xx_t *)&im->gpio[0];
+ u32 dvo = gpio->dat;
+
+ debug("CLOCK %s\n", assert_clk ? "high" : "low");
+ if (assert_clk)
+ dvo |= FPGA_CCLK;
+ else
+ dvo &= ~FPGA_CCLK;
+
+ if (flush)
+ gpio->dat = dvo;
+
+ return assert_clk;
+}
+
+static inline int _write_fpga(u8 val, int dump)
+{
+ volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
+ volatile gpio83xx_t *gpio = (gpio83xx_t *)&im->gpio[0];
+ int i;
+ u32 dvo = gpio->dat;
+
+ if (dump)
+ debug(" %02x -> ", val);
+ for (i = 0; i < 8; i++) {
+ dvo &= ~FPGA_CCLK;
+ gpio->dat = dvo;
+ dvo &= ~FPGA_DIN;
+ if (dump)
+ debug("%d ", val&1);
+ if (val & 1)
+ dvo |= FPGA_DIN;
+ gpio->dat = dvo;
+ dvo |= FPGA_CCLK;
+ gpio->dat = dvo;
+ val >>= 1;
+ }
+ if (dump)
+ debug("\n");
+
+ return 0;
+}
+
+int fpga_wr_fn(void *buf, size_t len, int flush, int cookie)
+{
+ unsigned char *data = (unsigned char *) buf;
+ int i;
+
+ debug("fpga_wr: buf %p / size %d\n", buf, len);
+ for (i = 0; i < len; i++)
+ _write_fpga(data[i], 0);
+ debug("\n");
+
+ return FPGA_SUCCESS;
+}
--- /dev/null
+/*
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+extern int mergerbox_init_fpga(void);
+
+extern int fpga_pgm_fn(int assert_pgm, int flush, int cookie);
+extern int fpga_status_fn(int cookie);
+extern int fpga_config_fn(int assert, int flush, int cookie);
+extern int fpga_done_fn(int cookie);
+extern int fpga_clk_fn(int assert_clk, int flush, int cookie);
+extern int fpga_wr_fn(void *buf, size_t len, int flush, int cookie);
+extern int fpga_null_fn(int cookie);
--- /dev/null
+/*
+ * Copyright (C) 2007 Freescale Semiconductor, Inc.
+ *
+ * Copyright (C) 2011 Matrix Vision GmbH
+ * Andre Schwarz <andre.schwarz@matrix-vision.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+#include <common.h>
+#include <hwconfig.h>
+#include <i2c.h>
+#include <spi.h>
+#include <asm/io.h>
+#include <asm/fsl_mpc83xx_serdes.h>
+#include <fdt_support.h>
+#include <spd_sdram.h>
+#include "mergerbox.h"
+#include "fpga.h"
+#include "../common/mv_common.h"
+
+static void setup_serdes(void)
+{
+ fsl_setup_serdes(CONFIG_FSL_SERDES1, FSL_SERDES_PROTO_SATA,
+ FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V);
+ fsl_setup_serdes(CONFIG_FSL_SERDES2, FSL_SERDES_PROTO_PEX,
+ FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V);
+}
+
+#if defined(CONFIG_SYS_DRAM_TEST)
+int testdram(void)
+{
+ uint *pstart = (uint *) CONFIG_SYS_MEMTEST_START;
+ uint *pend = (uint *) CONFIG_SYS_MEMTEST_END;
+ uint *p;
+
+ printf("Testing DRAM from 0x%08x to 0x%08x\n",
+ CONFIG_SYS_MEMTEST_START, CONFIG_SYS_MEMTEST_END);
+
+ printf("DRAM test phase 1:\n");
+ for (p = pstart; p < pend; p++)
+ *p = 0xaaaaaaaa;
+
+ for (p = pstart; p < pend; p++) {
+ if (*p != 0xaaaaaaaa) {
+ printf("DRAM test fails at: %08x\n", (uint) p);
+ return 1;
+ }
+ }
+
+ printf("DRAM test phase 2:\n");
+ for (p = pstart; p < pend; p++)
+ *p = 0x55555555;
+
+ for (p = pstart; p < pend; p++) {
+ if (*p != 0x55555555) {
+ printf("DRAM test fails at: %08x\n", (uint) p);
+ return 1;
+ }
+ }
+
+ printf("DRAM test passed.\n");
+ return 0;
+}
+#endif
+
+phys_size_t initdram(int board_type)
+{
+ u32 msize;
+
+ volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
+ volatile clk83xx_t *clk = (clk83xx_t *)&immr->clk;
+
+ /* Enable PCI_CLK[0:1] */
+ clk->occr |= 0xc0000000;
+ udelay(2000);
+
+#if defined(CONFIG_SPD_EEPROM)
+ msize = spd_sdram();
+#else
+ immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
+ u32 msize_log2;
+
+ msize = CONFIG_SYS_DDR_SIZE;
+ msize_log2 = __ilog2(msize);
+
+ im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_SDRAM_BASE & 0xfffff000;
+ im->sysconf.ddrlaw[0].ar = LBLAWAR_EN | (msize_log2 - 1);
+
+ im->sysconf.ddrcdr = CONFIG_SYS_DDRCDR_VALUE;
+ udelay(50000);
+
+ im->ddr.sdram_clk_cntl = CONFIG_SYS_DDR_SDRAM_CLK_CNTL;
+ udelay(1000);
+
+ im->ddr.csbnds[0].csbnds = CONFIG_SYS_DDR_CS0_BNDS;
+ im->ddr.cs_config[0] = CONFIG_SYS_DDR_CS0_CONFIG;
+ udelay(1000);
+
+ im->ddr.timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0;
+ im->ddr.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1;
+ im->ddr.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2;
+ im->ddr.timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3;
+ im->ddr.sdram_cfg = CONFIG_SYS_DDR_SDRAM_CFG;
+ im->ddr.sdram_cfg2 = CONFIG_SYS_DDR_SDRAM_CFG2;
+ im->ddr.sdram_mode = CONFIG_SYS_DDR_MODE;
+ im->ddr.sdram_mode2 = CONFIG_SYS_DDR_MODE2;
+ im->ddr.sdram_interval = CONFIG_SYS_DDR_INTERVAL;
+ __asm__ __volatile__("sync");
+ udelay(1000);
+
+ im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN;
+ udelay(2000);
+#endif
+ setup_serdes();
+
+ return msize << 20;
+}
+
+int checkboard(void)
+{
+ puts("Board: Matrix Vision MergerBox\n");
+
+ return 0;
+}
+
+int misc_init_r(void)
+{
+ u16 dim;
+ int result;
+ volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
+ volatile gpio83xx_t *gpio = (gpio83xx_t *)&immr->gpio[1];
+ unsigned char mac[6], mac_verify[6];
+ char *s = getenv("reset_env");
+
+ for (dim = 10; dim < 180; dim += 5) {
+ mergerbox_tft_dim(dim);
+ udelay(100000);
+ }
+
+ if (s)
+ mv_reset_environment();
+
+ i2c_read(SPD_EEPROM_ADDRESS, 0x80, 2, mac, sizeof(mac));
+
+ /* check if Matrix Vision prefix present and export to env */
+ if (mac[0] == 0x00 && mac[1] == 0x0c && mac[2] == 0x8d) {
+ printf("valid MAC found in eeprom: %pM\n", mac);
+ eth_setenv_enetaddr("ethaddr", mac);
+ } else {
+ printf("no valid MAC found in eeprom.\n");
+
+ /* no: check the env */
+ if (!eth_getenv_enetaddr("ethaddr", mac)) {
+ printf("no valid MAC found in env either.\n");
+ /* TODO: ask for valid MAC */
+ } else {
+ printf("valid MAC found in env: %pM\n", mac);
+ printf("updating MAC in eeprom.\n");
+
+ do {
+ result = test_and_clear_bit(20, &gpio->dat);
+ if (result)
+ printf("unprotect EEPROM failed !\n");
+ udelay(20000);
+ } while(result);
+
+ i2c_write(SPD_EEPROM_ADDRESS, 0x80, 2, mac, 6);
+ udelay(20000);
+
+ do {
+ result = test_and_set_bit(20, &gpio->dat);
+ if (result)
+ printf("protect EEPROM failed !\n");
+ udelay(20000);
+ } while(result);
+
+ printf("verify MAC %pM ... ", mac);
+ i2c_read(SPD_EEPROM_ADDRESS, 0x80, 2, mac_verify, 6);
+
+ if (!strncmp((char *)mac, (char *)mac_verify, 6))
+ printf("ok.\n");
+ else
+ /* TODO: retry or do something useful */
+ printf("FAILED (got %pM) !\n", mac_verify);
+ }
+ }
+
+ return 0;
+}
+
+int spi_cs_is_valid(unsigned int bus, unsigned int cs)
+{
+ return bus == 0 && cs == 0;
+}
+
+void spi_cs_activate(struct spi_slave *slave)
+{
+ volatile gpio83xx_t *iopd = &((immap_t *)CONFIG_SYS_IMMR)->gpio[0];
+
+ iopd->dat &= ~TFT_SPI_CPLD_CS;
+}
+
+void spi_cs_deactivate(struct spi_slave *slave)
+{
+ volatile gpio83xx_t *iopd = &((immap_t *)CONFIG_SYS_IMMR)->gpio[0];
+
+ iopd->dat |= TFT_SPI_CPLD_CS;
+}
+
+/* control backlight pwm (display brightness).
+ * allow values 0-250 with 0 = turn off and 250 = max brightness
+ */
+void mergerbox_tft_dim(u16 value)
+{
+ struct spi_slave *slave;
+ u16 din;
+ u16 dout = 0;
+
+ if (value > 0 && value < 250)
+ dout = 0x4000 | value;
+
+ slave = spi_setup_slave(0, 0, 1000000, SPI_MODE_0 | SPI_CS_HIGH);
+ spi_claim_bus(slave);
+ spi_xfer(slave, 16, &dout, &din, SPI_XFER_BEGIN | SPI_XFER_END);
+ spi_release_bus(slave);
+ spi_free_slave(slave);
+}
+
+void ft_board_setup(void *blob, bd_t *bd)
+{
+ ft_cpu_setup(blob, bd);
+ fdt_fixup_dr_usb(blob, bd);
+ ft_pci_setup(blob, bd);
+}
--- /dev/null
+/*
+ * Copyright (C) 2011 Matrix Vision GmbH
+ * Andre Schwarz <andre.schwarz@matrix-vision.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+#ifndef __MERGERBOX_H__
+#define __MERGERBOX_H__
+
+#define MV_GPIO
+
+/*
+ * GPIO Bank 1
+ */
+#define TFT_SPI_EN (0x80000000>>0)
+#define FPGA_CONFIG (0x80000000>>1)
+#define FPGA_STATUS (0x80000000>>2)
+#define FPGA_CONF_DONE (0x80000000>>3)
+#define FPGA_DIN (0x80000000>>4)
+#define FPGA_CCLK (0x80000000>>5)
+#define MAN_RST (0x80000000>>6)
+#define FPGA_SYS_RST (0x80000000>>7)
+#define WD_WDI (0x80000000>>8)
+#define TFT_RST (0x80000000>>9)
+#define HISCON_GPIO1 (0x80000000>>10)
+#define HISCON_GPIO2 (0x80000000>>11)
+#define B2B_GPIO2 (0x80000000>>12)
+#define CCU_GPIN (0x80000000>>13)
+#define CCU_GPOUT (0x80000000>>14)
+#define TFT_GPIO0 (0x80000000>>15)
+#define TFT_GPIO1 (0x80000000>>16)
+#define TFT_GPIO2 (0x80000000>>17)
+#define TFT_GPIO3 (0x80000000>>18)
+#define B2B_GPIO0 (0x80000000>>19)
+#define B2B_GPIO1 (0x80000000>>20)
+#define TFT_SPI_CPLD_CS (0x80000000>>21)
+#define TFT_SPI_CS (0x80000000>>22)
+#define CCU_PWR_EN (0x80000000>>23)
+#define B2B_GPIO3 (0x80000000>>24)
+#define CCU_PWR_STAT (0x80000000>>25)
+
+#define MV_GPIO1_DAT (FPGA_CONFIG|CCU_PWR_EN|TFT_SPI_CPLD_CS)
+#define MV_GPIO1_OUT (TFT_SPI_EN|FPGA_CONFIG|FPGA_DIN|FPGA_CCLK|CCU_PWR_EN| \
+ TFT_SPI_CPLD_CS)
+#define MV_GPIO1_ODE (FPGA_CONFIG|MAN_RST)
+
+/*
+ * GPIO Bank 2
+ */
+#define SPI_FLASH_WP (0x80000000>>10)
+#define SYS_EEPROM_WP (0x80000000>>11)
+#define SPI_FLASH_CS (0x80000000>>22)
+
+#define MV_GPIO2_DAT (SYS_EEPROM_WP|SPI_FLASH_CS)
+#define MV_GPIO2_OUT (SPI_FLASH_WP|SYS_EEPROM_WP|SPI_FLASH_CS)
+#define MV_GPIO2_ODE 0
+
+void mergerbox_tft_dim(u16 value);
+
+#endif
--- /dev/null
+/*
+ * Copyright (C) 2006-2009 Freescale Semiconductor, Inc.
+ *
+ * Copyright (C) 2011 Matrix Vision GmbH
+ * Andre Schwarz <andre.schwarz@matrix-vision.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+#include <common.h>
+#include <mpc83xx.h>
+#include <pci.h>
+#include <asm/io.h>
+#include <asm/fsl_mpc83xx_serdes.h>
+#include "mergerbox.h"
+#include "fpga.h"
+#include "../common/mv_common.h"
+
+static struct pci_region pci_regions[] = {
+ {
+ .bus_start = CONFIG_SYS_PCI_MEM_BASE,
+ .phys_start = CONFIG_SYS_PCI_MEM_PHYS,
+ .size = CONFIG_SYS_PCI_MEM_SIZE,
+ .flags = PCI_REGION_MEM | PCI_REGION_PREFETCH
+ },
+ {
+ .bus_start = CONFIG_SYS_PCI_MMIO_BASE,
+ .phys_start = CONFIG_SYS_PCI_MMIO_PHYS,
+ .size = CONFIG_SYS_PCI_MMIO_SIZE,
+ .flags = PCI_REGION_MEM
+ },
+ {
+ .bus_start = CONFIG_SYS_PCI_IO_BASE,
+ .phys_start = CONFIG_SYS_PCI_IO_PHYS,
+ .size = CONFIG_SYS_PCI_IO_SIZE,
+ .flags = PCI_REGION_IO
+ }
+};
+
+static struct pci_region pcie_regions_0[] = {
+ {
+ .bus_start = CONFIG_SYS_PCIE1_MEM_BASE,
+ .phys_start = CONFIG_SYS_PCIE1_MEM_PHYS,
+ .size = CONFIG_SYS_PCIE1_MEM_SIZE,
+ .flags = PCI_REGION_MEM,
+ },
+ {
+ .bus_start = CONFIG_SYS_PCIE1_IO_BASE,
+ .phys_start = CONFIG_SYS_PCIE1_IO_PHYS,
+ .size = CONFIG_SYS_PCIE1_IO_SIZE,
+ .flags = PCI_REGION_IO,
+ },
+};
+
+static struct pci_region pcie_regions_1[] = {
+ {
+ .bus_start = CONFIG_SYS_PCIE2_MEM_BASE,
+ .phys_start = CONFIG_SYS_PCIE2_MEM_PHYS,
+ .size = CONFIG_SYS_PCIE2_MEM_SIZE,
+ .flags = PCI_REGION_MEM,
+ },
+ {
+ .bus_start = CONFIG_SYS_PCIE2_IO_BASE,
+ .phys_start = CONFIG_SYS_PCIE2_IO_PHYS,
+ .size = CONFIG_SYS_PCIE2_IO_SIZE,
+ .flags = PCI_REGION_IO,
+ },
+};
+
+void pci_init_board(void)
+{
+ volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
+ volatile sysconf83xx_t *sysconf = &immr->sysconf;
+ volatile clk83xx_t *clk = (clk83xx_t *)&immr->clk;
+ volatile law83xx_t *pci_law = immr->sysconf.pcilaw;
+ volatile law83xx_t *pcie_law = sysconf->pcielaw;
+ struct pci_region *reg[] = { pci_regions };
+ struct pci_region *pcie_reg[] = { pcie_regions_0, pcie_regions_1, };
+
+ volatile gpio83xx_t *gpio;
+ gpio = (gpio83xx_t *)&immr->gpio[0];
+
+ gpio->dat = MV_GPIO1_DAT;
+ gpio->odr = MV_GPIO1_ODE;
+ gpio->dir = MV_GPIO1_OUT;
+
+ gpio = (gpio83xx_t *)&immr->gpio[1];
+
+ gpio->dat = MV_GPIO2_DAT;
+ gpio->odr = MV_GPIO2_ODE;
+ gpio->dir = MV_GPIO2_OUT;
+
+ printf("SICRH / SICRL : 0x%08x / 0x%08x\n", immr->sysconf.sicrh,
+ immr->sysconf.sicrl);
+
+ /* Enable PCI_CLK[0:1] */
+ clk->occr |= 0xc0000000;
+ udelay(2000);
+
+ mergerbox_init_fpga();
+ mv_load_fpga();
+
+ mergerbox_tft_dim(0);
+
+ /* Configure PCI Local Access Windows */
+ pci_law[0].bar = CONFIG_SYS_PCI_MEM_PHYS & LAWBAR_BAR;
+ pci_law[0].ar = LBLAWAR_EN | LBLAWAR_512MB;
+
+ pci_law[1].bar = CONFIG_SYS_PCI_IO_PHYS & LAWBAR_BAR;
+ pci_law[1].ar = LBLAWAR_EN | LBLAWAR_1MB;
+
+ udelay(2000);
+
+ mpc83xx_pci_init(1, reg);
+
+ /* Deassert the resets in the control register */
+ out_be32(&sysconf->pecr1, 0xE0008000);
+ out_be32(&sysconf->pecr2, 0xE0008000);
+ udelay(2000);
+
+ out_be32(&pcie_law[0].bar, CONFIG_SYS_PCIE1_BASE & LAWBAR_BAR);
+ out_be32(&pcie_law[0].ar, LBLAWAR_EN | LBLAWAR_512MB);
+
+ out_be32(&pcie_law[1].bar, CONFIG_SYS_PCIE2_BASE & LAWBAR_BAR);
+ out_be32(&pcie_law[1].ar, LBLAWAR_EN | LBLAWAR_512MB);
+
+ mpc83xx_pcie_init(2, pcie_reg);
+}
--- /dev/null
+/*
+ * Copyright (C) 2011 Matrix Vision GmbH
+ * Andre Schwarz <andre.schwarz@matrix-vision.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <ns16550.h>
+#include <netdev.h>
+#include <sm501.h>
+#include <pci.h>
+#include "../common/mv_common.h"
+
+#ifdef CONFIG_VIDEO
+static const SMI_REGS init_regs_800x480[] = {
+ /* set endianess to little endian */
+ {0x0005c, 0x00000000},
+ /* PCI drive 12mA */
+ {0x00004, 0x42401001},
+ /* current clock */
+ {0x0003c, 0x310a1818},
+ /* clocks for pm0... */
+ {0x00040, 0x0002184f},
+ {0x00044, 0x2a1a0a01},
+ /* GPIO */
+ {0x10008, 0x00000000},
+ {0x1000C, 0x00000000},
+ /* panel control regs */
+ {0x80000, 0x0f017106},
+ {0x80004, 0x0},
+ {0x80008, 0x0},
+ {0x8000C, 0x00000000},
+ {0x80010, 0x0c800c80},
+ /* width 0x320 */
+ {0x80014, 0x03200000},
+ /* height 0x1e0 */
+ {0x80018, 0x01E00000},
+ {0x8001C, 0x0},
+ {0x80020, 0x01df031f},
+ {0x80024, 0x041f031f},
+ {0x80028, 0x00800347},
+ {0x8002C, 0x020c01df},
+ {0x80030, 0x000201e9},
+ {0x80200, 0x00000000},
+ /* ZV[0:7] */
+ {0x00008, 0x00ff0000},
+ /* 24-Bit TFT */
+ {0x0000c, 0x3f000000},
+ {0, 0}
+};
+
+/*
+ * Returns SM107 register base address. First thing called in the driver.
+ */
+unsigned int board_video_init(void)
+{
+ pci_dev_t devbusfn;
+ u32 addr;
+
+ devbusfn = pci_find_device(PCI_VENDOR_SM, PCI_DEVICE_SM501, 0);
+ if (devbusfn != -1) {
+ pci_read_config_dword(devbusfn, PCI_BASE_ADDRESS_1,
+ (u32 *)&addr);
+ return addr & 0xfffffffe;
+ }
+
+ return 0;
+}
+
+/*
+ * Called after initializing the SM501 and before clearing the screen.
+ */
+void board_validate_screen(unsigned int base)
+{
+}
+
+/*
+ * Returns SM107 framebuffer address
+ */
+unsigned int board_video_get_fb(void)
+{
+ pci_dev_t devbusfn;
+ u32 addr;
+
+ devbusfn = pci_find_device(PCI_VENDOR_SM, PCI_DEVICE_SM501, 0);
+ if (devbusfn != -1) {
+ pci_read_config_dword(devbusfn, PCI_BASE_ADDRESS_0,
+ (u32 *)&addr);
+ addr &= 0xfffffffe;
+#ifdef CONFIG_VIDEO_SM501_FBMEM_OFFSET
+ addr += CONFIG_VIDEO_SM501_FBMEM_OFFSET;
+#endif
+ return addr;
+ }
+
+ printf("board_video_get_fb(): FAILED\n");
+
+ return 0;
+}
+
+/*
+ * Return a pointer to the initialization sequence.
+ */
+const SMI_REGS *board_get_regs(void)
+{
+ return init_regs_800x480;
+}
+
+int board_get_width(void)
+{
+ return 800;
+}
+
+int board_get_height(void)
+{
+ return 480;
+}
+#endif
MPC837XEMDS_HOST powerpc mpc83xx mpc837xemds freescale - MPC837XEMDS:PCI
MPC837XERDB powerpc mpc83xx mpc837xerdb freescale
kmeter1 powerpc mpc83xx km83xx keymile
+MERGERBOX powerpc mpc83xx mergerbox matrix_vision
MVBLM7 powerpc mpc83xx mvblm7 matrix_vision
SIMPC8313_LP powerpc mpc83xx simpc8313 sheldon - SIMPC8313:NAND_LP
SIMPC8313_SP powerpc mpc83xx simpc8313 sheldon - SIMPC8313:NAND_SP
--- /dev/null
+Matrix Vision MergerBox
+-----------------------
+
+1. Board Description
+
+ The MergerBox is a 120x160mm single board computing platform
+ for 3D Full-HD digital video processing.
+
+ Power Supply is 10-32VDC.
+
+2 System Components
+
+2.1 CPU
+ Freescale MPC8377 CPU running at 800MHz core and 333MHz csb.
+ 256 MByte DDR-II memory @ 333MHz data rate.
+ 64 MByte Nor Flash on local bus.
+ 1 GByte Nand Flash on FCM.
+ 1 Vitesse VSC8601 RGMII ethernet Phys.
+ 1 USB host controller over ULPI I/F with 4-Port hub.
+ 2 serial ports. Console running on ttyS0 @ 115200 8N1.
+ 1 mPCIe expansion slot (PCIe x1 + USB) used for Wifi/Bt.
+ 2 PCIe x1 busses on local mPCIe and cutom expansion connector.
+ 2 SATA host ports.
+ System configuration (HRCW) is taken from I2C EEPROM.
+
+2.2 Graphics
+ SM107 emebedded video controller driving a 5" 800x480 TFT panel.
+ Connected over 32-Bit/66MHz PCI utilizing 4 MByte embedded memory.
+
+2.3 FPGA
+ Altera Cyclone-IV EP4C115 with several PCI DMA engines.
+ Connects to 7x Gennum 3G-SDI transceivers as video interconnect
+ as well as a HDMI v1.4 compliant output for 3D monitoring.
+ Utilizes two more DDR-II controllers providing 256MB memory.
+
+2.4 I2C
+ Bus1:
+ AD7418 @ 0x50 for voltage/temp. monitoring.
+ SX8650 @ 0x90 touch controller for HMI.
+ EEPROM @ 0xA0 for system setup (HRCW etc.) + vendor specifics.
+ Bus2:
+ mPCIe SMBus
+ SiI9022A @ 0x72/0xC0 HDMI transmitter.
+ TCA6416A @ 0x40 + 0x42 16-Bit I/O expander.
+ LMH1983 @ 0xCA video PLL.
+ DS1338C @ 0xD0 real-time clock with embedded crystal.
+ 9FG104 @ 0xDC 4x 100MHz LVDS SerDes reference clock.
+
+3 Flash layout.
+
+ reset vector is 0x00000100, i.e. low boot.
+
+ 00000000 u-boot binary.
+ 00100000 FPGA raw bit file.
+ 00300000 FIT image holding kernel, dtb and rescue squashfs.
+ 03d00000 u-boot environment.
+ 03e00000 splash image
+
+ mtd partitions are propagated to linux kernel via device tree blob.
--- /dev/null
+/*
+ * Copyright (C) 2007 Freescale Semiconductor, Inc.
+ *
+ * Copyright (C) 2011 Matrix Vision GmbH
+ * Andre Schwarz <andre.schwarz@matrix-vision.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include <version.h>
+
+/*
+ * High Level Configuration Options
+ */
+#define CONFIG_E300 1
+#define CONFIG_MPC83xx 1
+#define CONFIG_MPC837x 1
+#define CONFIG_MPC8377 1
+
+#define CONFIG_SYS_TEXT_BASE 0xFC000000
+
+#define CONFIG_PCI 1
+
+#define CONFIG_MASK_AER_AO
+#define CONFIG_DISPLAY_AER_FULL
+
+#define CONFIG_MISC_INIT_R
+
+/*
+ * On-board devices
+ */
+#define CONFIG_TSEC_ENET
+
+/*
+ * System Clock Setup
+ */
+#define CONFIG_83XX_CLKIN 66666667 /* in Hz */
+#define CONFIG_PCIE
+#define CONFIG_83XX_GENERIC_PCIE_REGISTER_HOSES
+#define CONFIG_SYS_CLK_FREQ CONFIG_83XX_CLKIN
+
+/*
+ * Hardware Reset Configuration Word stored in EEPROM.
+ */
+#define CONFIG_SYS_HRCW_LOW 0
+#define CONFIG_SYS_HRCW_HIGH 0
+
+/* Arbiter Configuration Register */
+#define CONFIG_SYS_ACR_PIPE_DEP 3
+#define CONFIG_SYS_ACR_RPTCNT 3
+
+/* System Priority Control Regsiter */
+#define CONFIG_SYS_SPCR_TSECEP 3
+
+/* System Clock Configuration Register */
+#define CONFIG_SYS_SCCR_TSEC1CM 3
+#define CONFIG_SYS_SCCR_TSEC2CM 0
+#define CONFIG_SYS_SCCR_SDHCCM 3
+#define CONFIG_SYS_SCCR_ENCCM 3 /* also clock for I2C-1 */
+#define CONFIG_SYS_SCCR_USBDRCM CONFIG_SYS_SCCR_ENCCM /* must match */
+#define CONFIG_SYS_SCCR_PCIEXP1CM 3
+#define CONFIG_SYS_SCCR_PCIEXP2CM 3
+#define CONFIG_SYS_SCCR_PCICM 1
+#define CONFIG_SYS_SCCR_SATACM 0xFF
+
+/*
+ * System IO Config
+ */
+#define CONFIG_SYS_SICRH 0x087c0000
+#define CONFIG_SYS_SICRL 0x40000000
+
+/*
+ * Output Buffer Impedance
+ */
+#define CONFIG_SYS_OBIR 0x30000000
+
+/*
+ * IMMR new address
+ */
+#define CONFIG_SYS_IMMR 0xE0000000
+
+/*
+ * DDR Setup
+ */
+#define CONFIG_SYS_DDR_BASE 0x00000000
+#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_BASE
+#define CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_BASE
+#define CONFIG_SYS_83XX_DDR_USES_CS0
+
+#define CONFIG_SYS_DDRCDR_VALUE (DDRCDR_EN | DDRCDR_PZ_HIZ |\
+ DDRCDR_NZ_HIZ | DDRCDR_ODT |\
+ DDRCDR_Q_DRN)
+
+#define CONFIG_SYS_DDR_SDRAM_CLK_CNTL DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05
+
+#define CONFIG_SYS_DDR_MODE_WEAK
+#define CONFIG_SYS_DDR_WRITE_DATA_DELAY 2
+#define CONFIG_SYS_DDR_CPO 0x1f
+
+/* SPD table located at offset 0x20 in extended adressing ROM
+ * used for HRCW fetch after power-on reset
+ */
+#define CONFIG_SPD_EEPROM
+#define SPD_EEPROM_ADDRESS 0x50
+#define SPD_EEPROM_OFFSET 0x20
+#define SPD_EEPROM_ADDR_LEN 2
+
+/*
+ * The reserved memory
+ */
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_MONITOR_LEN (512*1024)
+#define CONFIG_SYS_MALLOC_LEN (512*1024)
+
+/*
+ * Initial RAM Base Address Setup
+ */
+#define CONFIG_SYS_INIT_RAM_LOCK 1
+#define CONFIG_SYS_INIT_RAM_ADDR 0xE6000000 /* Initial RAM address */
+#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* End of used area in RAM */
+#define CONFIG_SYS_GBL_DATA_SIZE 0x100 /* num bytes initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE -\
+ CONFIG_SYS_GBL_DATA_SIZE)
+
+/*
+ * Local Bus Configuration & Clock Setup
+ */
+#define CONFIG_SYS_LCRR_DBYP LCRR_DBYP
+#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_8
+#define CONFIG_SYS_LBC_LBCR 0x00000000
+#define CONFIG_FSL_ELBC 1
+
+/*
+ * FLASH on the Local Bus
+ */
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_FLASH_CFI_DRIVER
+#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
+
+#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_FLASH_SIZE 64
+
+#define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_LBLAWAR0_PRELIM (LBLAWAR_EN | LBLAWAR_64MB)
+
+#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE | BR_PS_16 | BR_V)
+#define CONFIG_SYS_OR0_PRELIM (CONFIG_SYS_FLASH_BASE | OR_UPM_XAM |\
+ OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 |\
+ OR_GPCM_XACS | OR_GPCM_SCY_15 | OR_GPCM_TRLX |\
+ OR_GPCM_EHTR | OR_GPCM_EAD)
+
+#define CONFIG_SYS_MAX_FLASH_BANKS 1
+#define CONFIG_SYS_MAX_FLASH_SECT 512
+
+#undef CONFIG_SYS_FLASH_CHECKSUM
+#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Flash Erase Timeout (ms) */
+#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
+
+/*
+ * NAND Flash on the Local Bus
+ */
+#define CONFIG_MTD_NAND_VERIFY_WRITE 1
+#define CONFIG_SYS_MAX_NAND_DEVICE 1
+#define CONFIG_NAND_FSL_ELBC 1
+
+#define CONFIG_SYS_NAND_BASE 0xE0600000
+#define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_NAND_BASE | (2<<BR_DECC_SHIFT) |\
+ BR_PS_8 | BR_MS_FCM | BR_V)
+#define CONFIG_SYS_OR1_PRELIM (0xFFFF8000 | OR_FCM_BCTLD | OR_FCM_CST |\
+ OR_FCM_CHT | OR_FCM_SCY_1 | OR_FCM_RST |\
+ OR_FCM_TRLX | OR_FCM_EHTR)
+
+#define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_NAND_BASE
+#define CONFIG_SYS_LBLAWAR1_PRELIM 0x8000000E
+
+/*
+ * Serial Port
+ */
+#define CONFIG_CONS_INDEX 1
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE 1
+#define CONFIG_SYS_NS16550_CLK get_bus_freq(0)
+
+#define CONFIG_SYS_BAUDRATE_TABLE \
+ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
+
+#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR+0x4500)
+#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR+0x4600)
+
+#define CONFIG_CONSOLE ttyS0
+#define CONFIG_BAUDRATE 115200
+
+/* SERDES */
+#define CONFIG_FSL_SERDES
+#define CONFIG_FSL_SERDES1 0xe3000
+#define CONFIG_FSL_SERDES2 0xe3100
+
+/* Use the HUSH parser */
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
+
+/* Pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT 1
+#define CONFIG_OF_BOARD_SETUP 1
+#define CONFIG_OF_STDOUT_VIA_ALIAS 1
+
+/* I2C */
+#define CONFIG_HARD_I2C
+#define CONFIG_FSL_I2C
+#define CONFIG_I2C_MULTI_BUS
+#define CONFIG_SYS_I2C_SPEED 120000
+#define CONFIG_SYS_I2C_SLAVE 0x7F
+#define CONFIG_SYS_I2C_OFFSET 0x3000
+#define CONFIG_SYS_I2C2_OFFSET 0x3100
+
+/*
+ * General PCI
+ * Addresses are mapped 1-1.
+ */
+#define CONFIG_SYS_PCI_MEM_BASE 0x80000000
+#define CONFIG_SYS_PCI_MEM_PHYS CONFIG_SYS_PCI_MEM_BASE
+#define CONFIG_SYS_PCI_MEM_SIZE (256 << 20)
+#define CONFIG_SYS_PCI_MMIO_BASE 0x90000000
+#define CONFIG_SYS_PCI_MMIO_PHYS CONFIG_SYS_PCI_MMIO_BASE
+#define CONFIG_SYS_PCI_MMIO_SIZE (256 << 20)
+#define CONFIG_SYS_PCI_IO_BASE 0x00000000
+#define CONFIG_SYS_PCI_IO_PHYS 0xE0300000
+#define CONFIG_SYS_PCI_IO_SIZE (1 << 20)
+
+#ifdef CONFIG_PCIE
+#define CONFIG_SYS_PCIE1_BASE 0xA0000000
+#define CONFIG_SYS_PCIE1_CFG_BASE 0xA0000000
+#define CONFIG_SYS_PCIE1_CFG_SIZE (128 << 20)
+#define CONFIG_SYS_PCIE1_MEM_BASE 0xA8000000
+#define CONFIG_SYS_PCIE1_MEM_PHYS 0xA8000000
+#define CONFIG_SYS_PCIE1_MEM_SIZE (256 << 20)
+#define CONFIG_SYS_PCIE1_IO_BASE 0x00000000
+#define CONFIG_SYS_PCIE1_IO_PHYS 0xB8000000
+#define CONFIG_SYS_PCIE1_IO_SIZE (8 << 20)
+
+#define CONFIG_SYS_PCIE2_BASE 0xC0000000
+#define CONFIG_SYS_PCIE2_CFG_BASE 0xC0000000
+#define CONFIG_SYS_PCIE2_CFG_SIZE (128 << 20)
+#define CONFIG_SYS_PCIE2_MEM_BASE 0xC8000000
+#define CONFIG_SYS_PCIE2_MEM_PHYS 0xC8000000
+#define CONFIG_SYS_PCIE2_MEM_SIZE (256 << 20)
+#define CONFIG_SYS_PCIE2_IO_BASE 0x00000000
+#define CONFIG_SYS_PCIE2_IO_PHYS 0xD8000000
+#define CONFIG_SYS_PCIE2_IO_SIZE (8 << 20)
+#endif
+
+#define CONFIG_PCI_PNP
+#define CONFIG_PCI_SCAN_SHOW
+#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1957 /* Freescale */
+
+/*
+ * TSEC
+ */
+#define CONFIG_NET_MULTI
+#define CONFIG_GMII /* MII PHY management */
+#define CONFIG_SYS_VSC8601_SKEWFIX
+#define CONFIG_SYS_VSC8601_SKEW_TX 3
+#define CONFIG_SYS_VSC8601_SKEW_RX 3
+
+#define CONFIG_TSEC1
+#define CONFIG_HAS_ETH0
+#define CONFIG_TSEC1_NAME "TSEC0"
+#define CONFIG_SYS_TSEC1_OFFSET 0x24000
+#define TSEC1_PHY_ADDR 0x10
+#define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
+#define TSEC1_PHYIDX 0
+
+#define CONFIG_ETHPRIME "TSEC0"
+#define CONFIG_HAS_ETH0
+
+/*
+ * SATA
+ */
+#define CONFIG_LIBATA
+#define CONFIG_FSL_SATA
+
+#define CONFIG_SYS_SATA_MAX_DEVICE 2
+#define CONFIG_SATA1
+#define CONFIG_SYS_SATA1_OFFSET 0x18000
+#define CONFIG_SYS_SATA1 (CONFIG_SYS_IMMR + CONFIG_SYS_SATA1_OFFSET)
+#define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA
+#define CONFIG_SATA2
+#define CONFIG_SYS_SATA2_OFFSET 0x19000
+#define CONFIG_SYS_SATA2 (CONFIG_SYS_IMMR + CONFIG_SYS_SATA2_OFFSET)
+#define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA
+
+#define CONFIG_LBA48
+#define CONFIG_CMD_SATA
+#define CONFIG_DOS_PARTITION
+#define CONFIG_CMD_EXT2
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_VENDOREX
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_DNS
+#define CONFIG_BOOTP_DNS2
+#define CONFIG_BOOTP_NTPSERVER
+#define CONFIG_BOOTP_RANDOM_DELAY
+#define CONFIG_BOOTP_SEND_HOSTNAME
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_USB
+#define CONFIG_CMD_SPI
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_UBI
+#define CONFIG_CMD_UBIFS
+#define CONFIG_CMD_MTDPARTS
+#define CONFIG_CMD_SATA
+
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_JFFS2
+
+#define CONFIG_RBTREE
+#define CONFIG_LZO
+
+#define CONFIG_MTD_DEVICE
+#define CONFIG_MTD_PARTITIONS
+
+#define CONFIG_FLASH_CFI_MTD
+#define MTDIDS_DEFAULT "nor0=NOR,nand0=NAND"
+#define MTDPARTS_DEFAULT "mtdparts=NOR:1M(u-boot),2M(FPGA);NAND:-(root)"
+
+#define CONFIG_FIT
+#define CONFIG_FIT_VERBOSE 1
+
+#define CONFIG_CMDLINE_EDITING 1
+#define CONFIG_AUTO_COMPLETE
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_SYS_LOAD_ADDR 0x2000000
+#define CONFIG_LOADADDR 0x4000000
+#define CONFIG_SYS_PROMPT "=> "
+#define CONFIG_SYS_CBSIZE 256
+
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
+#define CONFIG_SYS_MAXARGS 16
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
+#define CONFIG_SYS_HZ 1000
+
+#define CONFIG_LOADS_ECHO 1
+#define CONFIG_SYS_LOADS_BAUD_CHANGE 1
+
+#define CONFIG_SYS_MEMTEST_START (60<<20)
+#define CONFIG_SYS_MEMTEST_END (70<<20)
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 256 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CONFIG_SYS_BOOTMAPSZ (256 << 20) /* Initial Memory map for Linux */
+
+/*
+ * Core HID Setup
+ */
+#define CONFIG_SYS_HID0_INIT 0x000000000
+#define CONFIG_SYS_HID0_FINAL (HID0_ENABLE_MACHINE_CHECK | \
+ HID0_ENABLE_INSTRUCTION_CACHE)
+#define CONFIG_SYS_HID2 HID2_HBE
+
+/*
+ * MMU Setup
+ */
+#define CONFIG_HIGH_BATS 1
+
+/* DDR: cache cacheable */
+#define CONFIG_SYS_SDRAM CONFIG_SYS_SDRAM_BASE
+
+#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM | BATL_PP_10 |\
+ BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM | BATU_BL_256M | BATU_VS |\
+ BATU_VP)
+#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L
+#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U
+
+/* unused */
+#define CONFIG_SYS_IBAT1L (0)
+#define CONFIG_SYS_IBAT1U (0)
+#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L
+#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U
+
+/* IMMRBAR, PCI IO and NAND: cache-inhibit and guarded */
+#define CONFIG_SYS_IBAT2L (CONFIG_SYS_IMMR | BATL_PP_10 |\
+ BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CONFIG_SYS_IBAT2U (CONFIG_SYS_IMMR | BATU_BL_8M | BATU_VS |\
+ BATU_VP)
+#define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L
+#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U
+
+/* unused */
+#define CONFIG_SYS_IBAT3L (0)
+#define CONFIG_SYS_IBAT3U (0)
+#define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L
+#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U
+
+/* FLASH: icache cacheable, but dcache-inhibit and guarded */
+#define CONFIG_SYS_IBAT4L (CONFIG_SYS_FLASH_BASE | BATL_PP_10 |\
+ BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT4U (CONFIG_SYS_FLASH_BASE | BATU_BL_64M |\
+ BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT4L (CONFIG_SYS_FLASH_BASE | BATL_PP_10 | \
+ BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CONFIG_SYS_DBAT4U CONFIG_SYS_IBAT4U
+
+/* Stack in dcache: cacheable, no memory coherence */
+#define CONFIG_SYS_IBAT5L (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_10)
+#define CONFIG_SYS_IBAT5U (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K |\
+ BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT5L CONFIG_SYS_IBAT5L
+#define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U
+
+/* PCI MEM space: cacheable */
+#define CONFIG_SYS_IBAT6L (CONFIG_SYS_PCI_MEM_PHYS | BATL_PP_10 |\
+ BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT6U (CONFIG_SYS_PCI_MEM_PHYS | BATU_BL_256M |\
+ BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT6L CONFIG_SYS_IBAT6L
+#define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT6U
+
+/* PCI MMIO space: cache-inhibit and guarded */
+#define CONFIG_SYS_IBAT7L (CONFIG_SYS_PCI_MMIO_PHYS | BATL_PP_10 | \
+ BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CONFIG_SYS_IBAT7U (CONFIG_SYS_PCI_MMIO_PHYS | BATU_BL_256M |\
+ BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT7L CONFIG_SYS_IBAT7L
+#define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT7U
+
+/*
+ * I2C EEPROM settings
+ */
+#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 6
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
+#define CONFIG_SYS_EEPROM_SIZE 0x4000
+
+/*
+ * Environment Configuration
+ */
+#define CONFIG_SYS_FLASH_PROTECTION
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_ENV_IS_IN_FLASH 1
+#define CONFIG_ENV_ADDR 0xFFD00000
+#define CONFIG_ENV_SECT_SIZE 0x20000
+#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
+
+/*
+ * Video
+ */
+#define CONFIG_VIDEO
+#define CONFIG_VIDEO_SM501_PCI
+#define VIDEO_FB_LITTLE_ENDIAN
+#define CONFIG_CMD_BMP
+#define CONFIG_VIDEO_SM501
+#define CONFIG_VIDEO_SM501_32BPP
+#define CONFIG_VIDEO_SM501_FBMEM_OFFSET 0x10000
+#define CONFIG_CFB_CONSOLE
+#define CONFIG_VIDEO_LOGO
+#define CONFIG_VIDEO_BMP_LOGO
+#define CONFIG_VGA_AS_SINGLE_DEVICE
+#define CONFIG_SPLASH_SCREEN
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+#define CONFIG_VIDEO_BMP_GZIP
+#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE (2 << 20)
+
+/*
+ * SPI
+ */
+#define CONFIG_MPC8XXX_SPI
+
+/*
+ * USB
+ */
+#define CONFIG_SYS_USB_HOST
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_FSL
+#define CONFIG_HAS_FSL_DR_USB
+#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
+
+#define CONFIG_USB_STORAGE
+#define CONFIG_USB_KEYBOARD
+/*
+ *
+ */
+#define CONFIG_BOOTDELAY 5
+#define CONFIG_AUTOBOOT_KEYED
+#define CONFIG_AUTOBOOT_STOP_STR "s"
+#define CONFIG_ZERO_BOOTDELAY_CHECK
+#define CONFIG_RESET_TO_RETRY 1000
+
+#define MV_CI MergerBox
+#define MV_VCI MergerBox
+#define MV_FPGA_DATA 0xfc100000
+#define MV_FPGA_SIZE 0x00200000
+
+#define CONFIG_SHOW_BOOT_PROGRESS 1
+
+#define MV_KERNEL_ADDR_RAM 0x02800000
+#define MV_DTB_ADDR_RAM 0x00600000
+#define MV_INITRD_ADDR_RAM 0x01000000
+#define MV_FITADDR 0xfc300000
+#define MV_SPLAH_ADDR 0xffe00000
+
+#define CONFIG_BOOTCOMMAND "run i2c_init;if test ${boot_sqfs} -eq 1;"\
+ "then; run fitboot;else;run ubiboot;fi;"
+#define CONFIG_BOOTARGS "console=ttyS0,115200n8"
+
+#define XMK_STR(x) #x
+#define MK_STR(x) XMK_STR(x)
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "console_nr=0\0"\
+ "stdin=serial\0"\
+ "stdout=serial\0"\
+ "stderr=serial\0"\
+ "boot_sqfs=1\0"\
+ "usb_dr_mode=host\0"\
+ "bootfile=MergerBox.fit\0"\
+ "baudrate=" MK_STR(CONFIG_BAUDRATE) "\0"\
+ "fpga=0\0"\
+ "fpgadata=" MK_STR(MV_FPGA_DATA) "\0"\
+ "fpgadatasize=" MK_STR(MV_FPGA_SIZE) "\0"\
+ "mv_kernel_ram=" MK_STR(MV_KERNEL_ADDR_RAM) "\0"\
+ "mv_initrd_ram=" MK_STR(MV_INITRD_ADDR_RAM) "\0"\
+ "mv_dtb_ram=" MK_STR(MV_DTB_ADDR_RAM) "\0"\
+ "uboota=" MK_STR(CONFIG_SYS_TEXT_BASE) "\0"\
+ "fitaddr=" MK_STR(MV_FITADDR) "\0"\
+ "mv_version=" U_BOOT_VERSION "\0"\
+ "mtdids=" MTDIDS_DEFAULT "\0"\
+ "mtdparts=" MTDPARTS_DEFAULT "\0"\
+ "dhcp_client_id=" MK_STR(MV_CI) "\0"\
+ "dhcp_vendor-class-identifier=" MK_STR(MV_VCI) "\0"\
+ "upd_uboot=dhcp;tftp bdi2000/u-boot-mergerbox-xp.bin;"\
+ "protect off all;erase $uboota +0xC0000;"\
+ "cp.b $loadaddr $uboota $filesize\0"\
+ "upd_fpga=dhcp;tftp MergerBox.rbf;erase $fpgadata +$fpgadatasize;"\
+ "cp.b $loadaddr $fpgadata $filesize\0"\
+ "upd_fit=dhcp;tftp MergerBox.fit;erase $fitaddr +0x1000000;"\
+ "cp.b $loadaddr $fitaddr $filesize\0"\
+ "addsqshrfs=set bootargs $bootargs root=/dev/ram ro "\
+ "rootfstype=squashfs\0"\
+ "addubirfs=set bootargs $bootargs ubi.mtd=9 root=ubi0:rootfs rw "\
+ "rootfstype=ubifs\0"\
+ "addusbrfs=set bootargs $bootargs root=/dev/sda1 rw "\
+ "rootfstype=ext3 usb-storage.delay_use=1 rootdelay=3\0"\
+ "netusbboot=bootp;run fpganetload fitnetload addusbrfs doboot\0"\
+ "netubiboot= bootp;run fpganetload fitnetload addubirfs doboot\0"\
+ "ubiboot=run fitprep addubirfs;set mv_initrd_ram -;run doboot\0"\
+ "doboot=bootm $mv_kernel_ram $mv_initrd_ram $mv_dtb_ram\0"\
+ "fitprep=imxtract $fitaddr kernel $mv_kernel_ram;"\
+ "imxtract $fitaddr ramdisk $mv_initrd_ram;"\
+ "imxtract $fitaddr fdt $mv_dtb_ram\0"\
+ "fdtprep=fdt addr $mv_dtb_ram;fdt boardsetup\0"\
+ "fitboot=run fitprep fdtprep addsqshrfs doboot\0"\
+ "i2c_init=run i2c_speed init_sdi_tx i2c_init_pll\0"\
+ "i2c_init_pll=i2c mw 65 9 2;i2c mw 65 9 0;i2c mw 65 5 2b;"\
+ "i2c mw 65 7 f;i2c mw 65 8 f;i2c mw 65 11 40;i2c mw 65 12 40;"\
+ "i2c mw 65 13 40; i2c mw 65 14 40; i2c mw 65 a 0\0"\
+ "i2c_speed=i2c dev 0;i2c speed 300000;i2c dev 1;i2c speed 120000\0"\
+ "init_sdi_tx=i2c mw 21 6 0;i2c mw 21 2 0;i2c mw 21 3 0;sleep 1;"\
+ "i2c mw 21 2 ff;i2c mw 21 3 3c\0"\
+ "splashimage=" MK_STR(MV_SPLAH_ADDR) "\0"\
+ ""
+
+#undef MK_STR
+#undef XMK_STR
+
+/*
+ * FPGA
+ */
+#define CONFIG_FPGA_COUNT 1
+#define CONFIG_FPGA CONFIG_SYS_ALTERA_CYCLON2
+#define CONFIG_FPGA_ALTERA
+#define CONFIG_FPGA_CYCLON2
+
+#endif
projects / u-boot.git / commitdiff