--- /dev/null
+/*
+ * Sunxi platform display controller register and constant defines
+ *
+ * (C) Copyright 2014 Hans de Goede <hdegoede@redhat.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _SUNXI_DISPLAY_H
+#define _SUNXI_DISPLAY_H
+
+struct sunxi_de_be_reg {
+ u8 res0[0x800]; /* 0x000 */
+ u32 mode; /* 0x800 */
+ u32 backcolor; /* 0x804 */
+ u32 disp_size; /* 0x808 */
+ u8 res1[0x4]; /* 0x80c */
+ u32 layer0_size; /* 0x810 */
+ u32 layer1_size; /* 0x814 */
+ u32 layer2_size; /* 0x818 */
+ u32 layer3_size; /* 0x81c */
+ u32 layer0_pos; /* 0x820 */
+ u32 layer1_pos; /* 0x824 */
+ u32 layer2_pos; /* 0x828 */
+ u32 layer3_pos; /* 0x82c */
+ u8 res2[0x10]; /* 0x830 */
+ u32 layer0_stride; /* 0x840 */
+ u32 layer1_stride; /* 0x844 */
+ u32 layer2_stride; /* 0x848 */
+ u32 layer3_stride; /* 0x84c */
+ u32 layer0_addr_low32b; /* 0x850 */
+ u32 layer1_addr_low32b; /* 0x854 */
+ u32 layer2_addr_low32b; /* 0x858 */
+ u32 layer3_addr_low32b; /* 0x85c */
+ u32 layer0_addr_high4b; /* 0x860 */
+ u32 layer1_addr_high4b; /* 0x864 */
+ u32 layer2_addr_high4b; /* 0x868 */
+ u32 layer3_addr_high4b; /* 0x86c */
+ u32 reg_ctrl; /* 0x870 */
+ u8 res3[0xc]; /* 0x874 */
+ u32 color_key_max; /* 0x880 */
+ u32 color_key_min; /* 0x884 */
+ u32 color_key_config; /* 0x888 */
+ u8 res4[0x4]; /* 0x88c */
+ u32 layer0_attr0_ctrl; /* 0x890 */
+ u32 layer1_attr0_ctrl; /* 0x894 */
+ u32 layer2_attr0_ctrl; /* 0x898 */
+ u32 layer3_attr0_ctrl; /* 0x89c */
+ u32 layer0_attr1_ctrl; /* 0x8a0 */
+ u32 layer1_attr1_ctrl; /* 0x8a4 */
+ u32 layer2_attr1_ctrl; /* 0x8a8 */
+ u32 layer3_attr1_ctrl; /* 0x8ac */
+};
+
+struct sunxi_lcdc_reg {
+ u32 ctrl; /* 0x00 */
+ u32 int0; /* 0x04 */
+ u32 int1; /* 0x08 */
+ u8 res0[0x04]; /* 0x0c */
+ u32 frame_ctrl; /* 0x10 */
+ u8 res1[0x2c]; /* 0x14 */
+ u32 tcon0_ctrl; /* 0x40 */
+ u32 tcon0_dclk; /* 0x44 */
+ u32 tcon0_basic_timing0; /* 0x48 */
+ u32 tcon0_basic_timing1; /* 0x4c */
+ u32 tcon0_basic_timing2; /* 0x50 */
+ u32 tcon0_basic_timing3; /* 0x54 */
+ u32 tcon0_hv_intf; /* 0x58 */
+ u8 res2[0x04]; /* 0x5c */
+ u32 tcon0_cpu_intf; /* 0x60 */
+ u32 tcon0_cpu_wr_dat; /* 0x64 */
+ u32 tcon0_cpu_rd_dat0; /* 0x68 */
+ u32 tcon0_cpu_rd_dat1; /* 0x6c */
+ u32 tcon0_ttl_timing0; /* 0x70 */
+ u32 tcon0_ttl_timing1; /* 0x74 */
+ u32 tcon0_ttl_timing2; /* 0x78 */
+ u32 tcon0_ttl_timing3; /* 0x7c */
+ u32 tcon0_ttl_timing4; /* 0x80 */
+ u32 tcon0_lvds_intf; /* 0x84 */
+ u32 tcon0_io_polarity; /* 0x88 */
+ u32 tcon0_io_tristate; /* 0x8c */
+ u32 tcon1_ctrl; /* 0x90 */
+ u32 tcon1_timing_source; /* 0x94 */
+ u32 tcon1_timing_scale; /* 0x98 */
+ u32 tcon1_timing_out; /* 0x9c */
+ u32 tcon1_timing_h; /* 0xa0 */
+ u32 tcon1_timing_v; /* 0xa4 */
+ u32 tcon1_timing_sync; /* 0xa8 */
+ u8 res3[0x44]; /* 0xac */
+ u32 tcon1_io_polarity; /* 0xf0 */
+ u32 tcon1_io_tristate; /* 0xf4 */
+};
+
+struct sunxi_hdmi_reg {
+ u32 version_id; /* 0x000 */
+ u32 ctrl; /* 0x004 */
+ u32 irq; /* 0x008 */
+ u32 hpd; /* 0x00c */
+ u32 video_ctrl; /* 0x010 */
+ u32 video_size; /* 0x014 */
+ u32 video_bp; /* 0x018 */
+ u32 video_fp; /* 0x01c */
+ u32 video_spw; /* 0x020 */
+ u32 video_polarity; /* 0x024 */
+ u8 res0[0x1d8]; /* 0x028 */
+ u32 pad_ctrl0; /* 0x200 */
+ u32 pad_ctrl1; /* 0x204 */
+ u32 pll_ctrl; /* 0x208 */
+ u32 pll_dbg0; /* 0x20c */
+};
+
+/*
+ * DE-BE register constants.
+ */
+#define SUNXI_DE_BE_WIDTH(x) (((x) - 1) << 0)
+#define SUNXI_DE_BE_HEIGHT(y) (((y) - 1) << 16)
+#define SUNXI_DE_BE_MODE_ENABLE (1 << 0)
+#define SUNXI_DE_BE_MODE_START (1 << 1)
+#define SUNXI_DE_BE_MODE_LAYER0_ENABLE (1 << 8)
+#define SUNXI_DE_BE_LAYER_STRIDE(x) ((x) << 5)
+#define SUNXI_DE_BE_REG_CTRL_LOAD_REGS (1 << 0)
+#define SUNXI_DE_BE_LAYER_ATTR1_FMT_XRGB8888 (0x09 << 8)
+
+/*
+ * LCDC register constants.
+ */
+#define SUNXI_LCDC_X(x) (((x) - 1) << 16)
+#define SUNXI_LCDC_Y(y) (((y) - 1) << 0)
+#define SUNXI_LCDC_CTRL_IO_MAP_MASK (1 << 0)
+#define SUNXI_LCDC_CTRL_IO_MAP_TCON0 (0 << 0)
+#define SUNXI_LCDC_CTRL_IO_MAP_TCON1 (1 << 0)
+#define SUNXI_LCDC_CTRL_TCON_ENABLE (1 << 31)
+#define SUNXI_LCDC_TCON0_DCLK_ENABLE (0xf << 28)
+#define SUNXI_LCDC_TCON1_CTRL_CLK_DELAY(n) (((n) & 0x1f) << 4)
+#define SUNXI_LCDC_TCON1_CTRL_ENABLE (1 << 31)
+#define SUNXI_LCDC_TCON1_TIMING_H_BP(n) (((n) - 1) << 0)
+#define SUNXI_LCDC_TCON1_TIMING_H_TOTAL(n) (((n) - 1) << 16)
+#define SUNXI_LCDC_TCON1_TIMING_V_BP(n) (((n) - 1) << 0)
+#define SUNXI_LCDC_TCON1_TIMING_V_TOTAL(n) (((n) * 2) << 16)
+
+/*
+ * HDMI register constants.
+ */
+#define SUNXI_HDMI_X(x) (((x) - 1) << 0)
+#define SUNXI_HDMI_Y(y) (((y) - 1) << 16)
+#define SUNXI_HDMI_CTRL_ENABLE (1 << 31)
+#define SUNXI_HDMI_IRQ_STATUS_FIFO_UF (1 << 0)
+#define SUNXI_HDMI_IRQ_STATUS_FIFO_OF (1 << 1)
+#define SUNXI_HDMI_IRQ_STATUS_BITS 0x73
+#define SUNXI_HDMI_HPD_DETECT (1 << 0)
+#define SUNXI_HDMI_VIDEO_CTRL_ENABLE (1 << 31)
+#define SUNXI_HDMI_VIDEO_POL_HOR (1 << 0)
+#define SUNXI_HDMI_VIDEO_POL_VER (1 << 1)
+#define SUNXI_HDMI_VIDEO_POL_TX_CLK (0x3e0 << 16)
+
+#ifdef CONFIG_MACH_SUN6I
+#define SUNXI_HDMI_PAD_CTRL0_HDP 0x7e80000f
+#define SUNXI_HDMI_PAD_CTRL0_RUN 0x7e8000ff
+#else
+#define SUNXI_HDMI_PAD_CTRL0_HDP 0xfe800000
+#define SUNXI_HDMI_PAD_CTRL0_RUN 0xfe800000
+#endif
+
+#ifdef CONFIG_MACH_SUN4I
+#define SUNXI_HDMI_PAD_CTRL1 0x00d8c820
+#elif defined CONFIG_MACH_SUN6I
+#define SUNXI_HDMI_PAD_CTRL1 0x01ded030
+#else
+#define SUNXI_HDMI_PAD_CTRL1 0x00d8c830
+#endif
+#define SUNXI_HDMI_PAD_CTRL1_HALVE (1 << 6)
+
+#ifdef CONFIG_MACH_SUN6I
+#define SUNXI_HDMI_PLL_CTRL 0xba48a308
+#define SUNXI_HDMI_PLL_CTRL_DIV(n) (((n) - 1) << 4)
+#else
+#define SUNXI_HDMI_PLL_CTRL 0xfa4ef708
+#define SUNXI_HDMI_PLL_CTRL_DIV(n) ((n) << 4)
+#endif
+#define SUNXI_HDMI_PLL_CTRL_DIV_MASK (0xf << 4)
+
+#define SUNXI_HDMI_PLL_DBG0_PLL3 (0 << 21)
+#define SUNXI_HDMI_PLL_DBG0_PLL7 (1 << 21)
+
+#endif /* _SUNXI_DISPLAY_H */
--- /dev/null
+/*
+ * Display driver for Allwinner SoCs.
+ *
+ * (C) Copyright 2013-2014 Luc Verhaegen <libv@skynet.be>
+ * (C) Copyright 2014 Hans de Goede <hdegoede@redhat.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+
+#include <asm/arch/clock.h>
+#include <asm/arch/display.h>
+#include <asm/global_data.h>
+#include <asm/io.h>
+#include <linux/fb.h>
+#include <video_fb.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+struct sunxi_display {
+ GraphicDevice graphic_device;
+ bool enabled;
+} sunxi_display;
+
+static int sunxi_hdmi_hpd_detect(void)
+{
+ struct sunxi_ccm_reg * const ccm =
+ (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+ struct sunxi_hdmi_reg * const hdmi =
+ (struct sunxi_hdmi_reg *)SUNXI_HDMI_BASE;
+
+ /* Set pll3 to 300MHz */
+ clock_set_pll3(300000000);
+
+ /* Set hdmi parent to pll3 */
+ clrsetbits_le32(&ccm->hdmi_clk_cfg, CCM_HDMI_CTRL_PLL_MASK,
+ CCM_HDMI_CTRL_PLL3);
+
+ /* Set ahb gating to pass */
+ setbits_le32(&ccm->ahb_gate1, 1 << AHB_GATE_OFFSET_HDMI);
+
+ /* Clock on */
+ setbits_le32(&ccm->hdmi_clk_cfg, CCM_HDMI_CTRL_GATE);
+
+ writel(SUNXI_HDMI_CTRL_ENABLE, &hdmi->ctrl);
+ writel(SUNXI_HDMI_PAD_CTRL0_HDP, &hdmi->pad_ctrl0);
+
+ udelay(1000);
+
+ if (readl(&hdmi->hpd) & SUNXI_HDMI_HPD_DETECT)
+ return 1;
+
+ /* No need to keep these running */
+ clrbits_le32(&hdmi->ctrl, SUNXI_HDMI_CTRL_ENABLE);
+ clrbits_le32(&ccm->hdmi_clk_cfg, CCM_HDMI_CTRL_GATE);
+ clrbits_le32(&ccm->ahb_gate1, 1 << AHB_GATE_OFFSET_HDMI);
+ clock_set_pll3(0);
+
+ return 0;
+}
+
+/*
+ * This is the entity that mixes and matches the different layers and inputs.
+ * Allwinner calls it the back-end, but i like composer better.
+ */
+static void sunxi_composer_init(void)
+{
+ struct sunxi_ccm_reg * const ccm =
+ (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+ struct sunxi_de_be_reg * const de_be =
+ (struct sunxi_de_be_reg *)SUNXI_DE_BE0_BASE;
+ int i;
+
+ /* Clocks on */
+ setbits_le32(&ccm->ahb_gate1, 1 << AHB_GATE_OFFSET_DE_BE0);
+ setbits_le32(&ccm->dram_clk_gate, 1 << CCM_DRAM_GATE_OFFSET_DE_BE0);
+ clock_set_de_mod_clock(&ccm->be0_clk_cfg, 300000000);
+
+ /* Engine bug, clear registers after reset */
+ for (i = 0x0800; i < 0x1000; i += 4)
+ writel(0, SUNXI_DE_BE0_BASE + i);
+
+ setbits_le32(&de_be->mode, SUNXI_DE_BE_MODE_ENABLE);
+}
+
+static void sunxi_composer_mode_set(struct fb_videomode *mode,
+ unsigned int address)
+{
+ struct sunxi_de_be_reg * const de_be =
+ (struct sunxi_de_be_reg *)SUNXI_DE_BE0_BASE;
+
+ writel(SUNXI_DE_BE_HEIGHT(mode->yres) | SUNXI_DE_BE_WIDTH(mode->xres),
+ &de_be->disp_size);
+ writel(SUNXI_DE_BE_HEIGHT(mode->yres) | SUNXI_DE_BE_WIDTH(mode->xres),
+ &de_be->layer0_size);
+ writel(SUNXI_DE_BE_LAYER_STRIDE(mode->xres), &de_be->layer0_stride);
+ writel(address << 3, &de_be->layer0_addr_low32b);
+ writel(address >> 29, &de_be->layer0_addr_high4b);
+ writel(SUNXI_DE_BE_LAYER_ATTR1_FMT_XRGB8888, &de_be->layer0_attr1_ctrl);
+
+ setbits_le32(&de_be->mode, SUNXI_DE_BE_MODE_LAYER0_ENABLE);
+}
+
+/*
+ * LCDC, what allwinner calls a CRTC, so timing controller and serializer.
+ */
+static void sunxi_lcdc_pll_set(int dotclock, int *clk_div, int *clk_double)
+{
+ struct sunxi_ccm_reg * const ccm =
+ (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+ int value, n, m, diff;
+ int best_n = 0, best_m = 0, best_diff = 0x0FFFFFFF;
+ int best_double = 0;
+
+ /*
+ * Find the lowest divider resulting in a matching clock, if there
+ * is no match, pick the closest lower clock, as monitors tend to
+ * not sync to higher frequencies.
+ */
+ for (m = 15; m > 0; m--) {
+ n = (m * dotclock) / 3000;
+
+ if ((n >= 9) && (n <= 127)) {
+ value = (3000 * n) / m;
+ diff = dotclock - value;
+ if (diff < best_diff) {
+ best_diff = diff;
+ best_m = m;
+ best_n = n;
+ best_double = 0;
+ }
+ }
+
+ /* These are just duplicates */
+ if (!(m & 1))
+ continue;
+
+ n = (m * dotclock) / 6000;
+ if ((n >= 9) && (n <= 127)) {
+ value = (6000 * n) / m;
+ diff = dotclock - value;
+ if (diff < best_diff) {
+ best_diff = diff;
+ best_m = m;
+ best_n = n;
+ best_double = 1;
+ }
+ }
+ }
+
+ debug("dotclock: %dkHz = %dkHz: (%d * 3MHz * %d) / %d\n",
+ dotclock, (best_double + 1) * 3000 * best_n / best_m,
+ best_double + 1, best_n, best_m);
+
+ clock_set_pll3(best_n * 3000000);
+
+ writel(CCM_LCD_CH1_CTRL_GATE |
+ (best_double ? CCM_LCD_CH1_CTRL_PLL3_2X : CCM_LCD_CH1_CTRL_PLL3) |
+ CCM_LCD_CH1_CTRL_M(best_m), &ccm->lcd0_ch1_clk_cfg);
+
+ *clk_div = best_m;
+ *clk_double = best_double;
+}
+
+static void sunxi_lcdc_init(void)
+{
+ struct sunxi_ccm_reg * const ccm =
+ (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+ struct sunxi_lcdc_reg * const lcdc =
+ (struct sunxi_lcdc_reg *)SUNXI_LCD0_BASE;
+
+ /* Reset off */
+ setbits_le32(&ccm->lcd0_ch0_clk_cfg, CCM_LCD_CH0_CTRL_RST);
+
+ /* Clock on */
+ setbits_le32(&ccm->ahb_gate1, 1 << AHB_GATE_OFFSET_LCD0);
+
+ /* Init lcdc */
+ writel(0, &lcdc->ctrl); /* Disable tcon */
+ writel(0, &lcdc->int0); /* Disable all interrupts */
+
+ /* Disable tcon0 dot clock */
+ clrbits_le32(&lcdc->tcon0_dclk, SUNXI_LCDC_TCON0_DCLK_ENABLE);
+
+ /* Set all io lines to tristate */
+ writel(0xffffffff, &lcdc->tcon0_io_tristate);
+ writel(0xffffffff, &lcdc->tcon1_io_tristate);
+}
+
+static void sunxi_lcdc_mode_set(struct fb_videomode *mode,
+ int *clk_div, int *clk_double)
+{
+ struct sunxi_lcdc_reg * const lcdc =
+ (struct sunxi_lcdc_reg *)SUNXI_LCD0_BASE;
+ int bp, total;
+
+ /* Use tcon1 */
+ clrsetbits_le32(&lcdc->ctrl, SUNXI_LCDC_CTRL_IO_MAP_MASK,
+ SUNXI_LCDC_CTRL_IO_MAP_TCON1);
+
+ /* Enabled, 0x1e start delay */
+ writel(SUNXI_LCDC_TCON1_CTRL_ENABLE |
+ SUNXI_LCDC_TCON1_CTRL_CLK_DELAY(0x1e), &lcdc->tcon1_ctrl);
+
+ writel(SUNXI_LCDC_X(mode->xres) | SUNXI_LCDC_Y(mode->yres),
+ &lcdc->tcon1_timing_source);
+ writel(SUNXI_LCDC_X(mode->xres) | SUNXI_LCDC_Y(mode->yres),
+ &lcdc->tcon1_timing_scale);
+ writel(SUNXI_LCDC_X(mode->xres) | SUNXI_LCDC_Y(mode->yres),
+ &lcdc->tcon1_timing_out);
+
+ bp = mode->hsync_len + mode->left_margin;
+ total = mode->xres + mode->right_margin + bp;
+ writel(SUNXI_LCDC_TCON1_TIMING_H_TOTAL(total) |
+ SUNXI_LCDC_TCON1_TIMING_H_BP(bp), &lcdc->tcon1_timing_h);
+
+ bp = mode->vsync_len + mode->upper_margin;
+ total = mode->yres + mode->lower_margin + bp;
+ writel(SUNXI_LCDC_TCON1_TIMING_V_TOTAL(total) |
+ SUNXI_LCDC_TCON1_TIMING_V_BP(bp), &lcdc->tcon1_timing_v);
+
+ writel(SUNXI_LCDC_X(mode->hsync_len) | SUNXI_LCDC_Y(mode->vsync_len),
+ &lcdc->tcon1_timing_sync);
+
+ sunxi_lcdc_pll_set(mode->pixclock, clk_div, clk_double);
+}
+
+static void sunxi_hdmi_mode_set(struct fb_videomode *mode,
+ int clk_div, int clk_double)
+{
+ struct sunxi_hdmi_reg * const hdmi =
+ (struct sunxi_hdmi_reg *)SUNXI_HDMI_BASE;
+ int x, y;
+
+ /* Write clear interrupt status bits */
+ writel(SUNXI_HDMI_IRQ_STATUS_BITS, &hdmi->irq);
+
+ /* Init various registers, select pll3 as clock source */
+ writel(SUNXI_HDMI_VIDEO_POL_TX_CLK, &hdmi->video_polarity);
+ writel(SUNXI_HDMI_PAD_CTRL0_RUN, &hdmi->pad_ctrl0);
+ writel(SUNXI_HDMI_PAD_CTRL1, &hdmi->pad_ctrl1);
+ writel(SUNXI_HDMI_PLL_CTRL, &hdmi->pll_ctrl);
+ writel(SUNXI_HDMI_PLL_DBG0_PLL3, &hdmi->pll_dbg0);
+
+ /* Setup clk div and doubler */
+ clrsetbits_le32(&hdmi->pll_ctrl, SUNXI_HDMI_PLL_CTRL_DIV_MASK,
+ SUNXI_HDMI_PLL_CTRL_DIV(clk_div));
+ if (!clk_double)
+ setbits_le32(&hdmi->pad_ctrl1, SUNXI_HDMI_PAD_CTRL1_HALVE);
+
+ /* Setup timing registers */
+ writel(SUNXI_HDMI_Y(mode->yres) | SUNXI_HDMI_X(mode->xres),
+ &hdmi->video_size);
+
+ x = mode->hsync_len + mode->left_margin;
+ y = mode->vsync_len + mode->upper_margin;
+ writel(SUNXI_HDMI_Y(y) | SUNXI_HDMI_X(x), &hdmi->video_bp);
+
+ x = mode->right_margin;
+ y = mode->lower_margin;
+ writel(SUNXI_HDMI_Y(y) | SUNXI_HDMI_X(x), &hdmi->video_fp);
+
+ x = mode->hsync_len;
+ y = mode->vsync_len;
+ writel(SUNXI_HDMI_Y(y) | SUNXI_HDMI_X(x), &hdmi->video_spw);
+
+ if (mode->sync & FB_SYNC_HOR_HIGH_ACT)
+ setbits_le32(&hdmi->video_polarity, SUNXI_HDMI_VIDEO_POL_HOR);
+
+ if (mode->sync & FB_SYNC_VERT_HIGH_ACT)
+ setbits_le32(&hdmi->video_polarity, SUNXI_HDMI_VIDEO_POL_VER);
+}
+
+static void sunxi_engines_init(void)
+{
+ sunxi_composer_init();
+ sunxi_lcdc_init();
+}
+
+static void sunxi_mode_set(struct fb_videomode *mode, unsigned int address)
+{
+ struct sunxi_de_be_reg * const de_be =
+ (struct sunxi_de_be_reg *)SUNXI_DE_BE0_BASE;
+ struct sunxi_lcdc_reg * const lcdc =
+ (struct sunxi_lcdc_reg *)SUNXI_LCD0_BASE;
+ struct sunxi_hdmi_reg * const hdmi =
+ (struct sunxi_hdmi_reg *)SUNXI_HDMI_BASE;
+ int clk_div, clk_double;
+ int retries = 3;
+
+retry:
+ clrbits_le32(&hdmi->video_ctrl, SUNXI_HDMI_VIDEO_CTRL_ENABLE);
+ clrbits_le32(&lcdc->ctrl, SUNXI_LCDC_CTRL_TCON_ENABLE);
+ clrbits_le32(&de_be->mode, SUNXI_DE_BE_MODE_START);
+
+ sunxi_composer_mode_set(mode, address);
+ sunxi_lcdc_mode_set(mode, &clk_div, &clk_double);
+ sunxi_hdmi_mode_set(mode, clk_div, clk_double);
+
+ setbits_le32(&de_be->reg_ctrl, SUNXI_DE_BE_REG_CTRL_LOAD_REGS);
+ setbits_le32(&de_be->mode, SUNXI_DE_BE_MODE_START);
+
+ udelay(1000000 / mode->refresh + 500);
+
+ setbits_le32(&lcdc->ctrl, SUNXI_LCDC_CTRL_TCON_ENABLE);
+
+ udelay(1000000 / mode->refresh + 500);
+
+ setbits_le32(&hdmi->video_ctrl, SUNXI_HDMI_VIDEO_CTRL_ENABLE);
+
+ udelay(1000000 / mode->refresh + 500);
+
+ /*
+ * Sometimes the display pipeline does not sync up properly, if
+ * this happens the hdmi fifo underrun or overrun bits are set.
+ */
+ if (readl(&hdmi->irq) &
+ (SUNXI_HDMI_IRQ_STATUS_FIFO_UF | SUNXI_HDMI_IRQ_STATUS_FIFO_OF)) {
+ if (retries--)
+ goto retry;
+ printf("HDMI fifo under or overrun\n");
+ }
+}
+
+void *video_hw_init(void)
+{
+ static GraphicDevice *graphic_device = &sunxi_display.graphic_device;
+ /*
+ * Vesa standard 1024x768@60
+ * 65.0 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
+ */
+ struct fb_videomode mode = {
+ .name = "1024x768",
+ .refresh = 60,
+ .xres = 1024,
+ .yres = 768,
+ .pixclock = 65000,
+ .left_margin = 160,
+ .right_margin = 24,
+ .upper_margin = 29,
+ .lower_margin = 3,
+ .hsync_len = 136,
+ .vsync_len = 6,
+ .sync = 0,
+ .vmode = 0,
+ .flag = 0,
+ };
+ int ret;
+
+ memset(&sunxi_display, 0, sizeof(struct sunxi_display));
+
+ printf("Reserved %dkB of RAM for Framebuffer.\n",
+ CONFIG_SUNXI_FB_SIZE >> 10);
+ gd->fb_base = gd->ram_top;
+
+ ret = sunxi_hdmi_hpd_detect();
+ if (!ret)
+ return NULL;
+
+ printf("HDMI connected.\n");
+ sunxi_display.enabled = true;
+
+ printf("Setting up a %s console.\n", mode.name);
+ sunxi_engines_init();
+ sunxi_mode_set(&mode, gd->fb_base - CONFIG_SYS_SDRAM_BASE);
+
+ /*
+ * These are the only members of this structure that are used. All the
+ * others are driver specific. There is nothing to decribe pitch or
+ * stride, but we are lucky with our hw.
+ */
+ graphic_device->frameAdrs = gd->fb_base;
+ graphic_device->gdfIndex = GDF_32BIT_X888RGB;
+ graphic_device->gdfBytesPP = 4;
+ graphic_device->winSizeX = mode.xres;
+ graphic_device->winSizeY = mode.yres;
+
+ return graphic_device;
+}
projects / u-boot.git / commitdiff