mpc83xx: MPC837XEMDS: Initialize SerDes before negating PCIE reset signal

The SerDes initialization should be finished before negating the reset
signal according to the reference manual. This isn't an issue on real
hardware, but we'd better stick to the specifications anyway.

Suggested-by: Liu Dave <DaveLiu@freescale.com>
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

diff --git a/board/freescale/mpc837xemds/pci.c b/board/freescale/mpc837xemds/pci.c
index 31116b31ce5d09313d3a7640f9d27c2fd923d3d8..29de2e77f01b1ece3d5ba1160745caf1e4ccab32 100644 (file)
--- a/board/freescale/mpc837xemds/pci.c
+++ b/board/freescale/mpc837xemds/pci.c
@@ -115,6 +115,13 @@ skip_pci:
        if (PARTID_NO_E(spridr) == SPR_8379)
                return;
 
+       if (pex2)
+               fsl_setup_serdes(CONFIG_FSL_SERDES2, FSL_SERDES_PROTO_PEX_X2,
+                                FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V);
+       else
+               fsl_setup_serdes(CONFIG_FSL_SERDES2, FSL_SERDES_PROTO_PEX,
+                                FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V);
+
        /* Configure the clock for PCIE controller */
        clrsetbits_be32(&clk->sccr, SCCR_PCIEXP1CM | SCCR_PCIEXP2CM,
                                    SCCR_PCIEXP1CM_1 | SCCR_PCIEXP2CM_1);
@@ -132,13 +139,6 @@ skip_pci:
        out_be32(&pcie_law[1].bar, CONFIG_SYS_PCIE2_BASE & LAWBAR_BAR);
        out_be32(&pcie_law[1].ar, LBLAWAR_EN | LBLAWAR_512MB);
 
-       if (pex2)
-               fsl_setup_serdes(CONFIG_FSL_SERDES2, FSL_SERDES_PROTO_PEX_X2,
-                                FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V);
-       else
-               fsl_setup_serdes(CONFIG_FSL_SERDES2, FSL_SERDES_PROTO_PEX,
-                                FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V);
-
        mpc83xx_pcie_init(pex2 ? 1 : 2, pcie_reg, 0);
 }